Merge remote-tracking branch 'bonzini/hw-dirs' into staging

* bonzini/hw-dirs:
  sh: move files referencing CPU to hw/sh4/
  ppc: move more files to hw/ppc
  ppc: move files referencing CPU to hw/ppc/
  m68k: move files referencing CPU to hw/m68k/
  i386: move files referencing CPU to hw/i386/
  arm: move files referencing CPU to hw/arm/
  hw: move boards and other isolated files to hw/ARCH
  ppc: express FDT dependency of pSeries and e500 boards via default-configs/
  build: always link device_tree.o into emulators if libfdt available
  hw: include hw header files with full paths
  ppc: do not use ../ in include files
  vt82c686: vt82c686 is not a PCI host bridge
  virtio-9p: remove PCI dependencies from hw/9pfs/
  virtio-9p: use CONFIG_VIRTFS, not CONFIG_LINUX
  hw: move device-hotplug.o to toplevel, compile it once
  hw: move qdev-monitor.o to toplevel directory
  hw: move fifo.[ch] to libqemuutil
  hw: move char backends to backends/

Conflicts:
	backends/baum.c
	backends/msmouse.c
	hw/a15mpcore.c
	hw/arm/Makefile.objs
	hw/arm/pic_cpu.c
	hw/dataplane/event-poll.c
	hw/dataplane/virtio-blk.c
	include/char/baum.h
	include/char/msmouse.h
	qemu-char.c
	vl.c

Resolve conflicts caused by header movements.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

1 files changed, 170 insertions, 0 deletions

diff --git a/hw/arm/exynos4_boards.c b/hw/arm/exynos4_boards.c
new file mode 100644
index 0000000000..473da349bd
--- /dev/null
+++ b/hw/arm/exynos4_boards.c
@@ -0,0 +1,170 @@
+/*
+ *  Samsung exynos4 SoC based boards emulation
+ *
+ *  Copyright (c) 2011 Samsung Electronics Co., Ltd. All rights reserved.
+ *    Maksim Kozlov <m.kozlov@samsung.com>
+ *    Evgeny Voevodin <e.voevodin@samsung.com>
+ *    Igor Mitsyanko  <i.mitsyanko@samsung.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "sysemu/sysemu.h"
+#include "hw/sysbus.h"
+#include "net/net.h"
+#include "hw/arm-misc.h"
+#include "exec/address-spaces.h"
+#include "hw/exynos4210.h"
+#include "hw/boards.h"
+
+#undef DEBUG
+
+//#define DEBUG
+
+#ifdef DEBUG
+    #undef PRINT_DEBUG
+    #define  PRINT_DEBUG(fmt, args...) \
+        do { \
+            fprintf(stderr, "  [%s:%d]   "fmt, __func__, __LINE__, ##args); \
+        } while (0)
+#else
+    #define  PRINT_DEBUG(fmt, args...)  do {} while (0)
+#endif
+
+#define SMDK_LAN9118_BASE_ADDR      0x05000000
+
+typedef enum Exynos4BoardType {
+    EXYNOS4_BOARD_NURI,
+    EXYNOS4_BOARD_SMDKC210,
+    EXYNOS4_NUM_OF_BOARDS
+} Exynos4BoardType;
+
+static int exynos4_board_id[EXYNOS4_NUM_OF_BOARDS] = {
+    [EXYNOS4_BOARD_NURI]     = 0xD33,
+    [EXYNOS4_BOARD_SMDKC210] = 0xB16,
+};
+
+static int exynos4_board_smp_bootreg_addr[EXYNOS4_NUM_OF_BOARDS] = {
+    [EXYNOS4_BOARD_NURI]     = EXYNOS4210_SECOND_CPU_BOOTREG,
+    [EXYNOS4_BOARD_SMDKC210] = EXYNOS4210_SECOND_CPU_BOOTREG,
+};
+
+static unsigned long exynos4_board_ram_size[EXYNOS4_NUM_OF_BOARDS] = {
+    [EXYNOS4_BOARD_NURI]     = 0x40000000,
+    [EXYNOS4_BOARD_SMDKC210] = 0x40000000,
+};
+
+static struct arm_boot_info exynos4_board_binfo = {
+    .loader_start     = EXYNOS4210_BASE_BOOT_ADDR,
+    .smp_loader_start = EXYNOS4210_SMP_BOOT_ADDR,
+    .nb_cpus          = EXYNOS4210_NCPUS,
+    .write_secondary_boot = exynos4210_write_secondary,
+};
+
+static QEMUMachine exynos4_machines[EXYNOS4_NUM_OF_BOARDS];
+
+static void lan9215_init(uint32_t base, qemu_irq irq)
+{
+    DeviceState *dev;
+    SysBusDevice *s;
+
+    /* This should be a 9215 but the 9118 is close enough */
+    if (nd_table[0].used) {
+        qemu_check_nic_model(&nd_table[0], "lan9118");
+        dev = qdev_create(NULL, "lan9118");
+        qdev_set_nic_properties(dev, &nd_table[0]);
+        qdev_prop_set_uint32(dev, "mode_16bit", 1);
+        qdev_init_nofail(dev);
+        s = SYS_BUS_DEVICE(dev);
+        sysbus_mmio_map(s, 0, base);
+        sysbus_connect_irq(s, 0, irq);
+    }
+}
+
+static Exynos4210State *exynos4_boards_init_common(QEMUMachineInitArgs *args,
+                                                   Exynos4BoardType board_type)
+{
+    if (smp_cpus != EXYNOS4210_NCPUS) {
+        fprintf(stderr, "%s board supports only %d CPU cores. Ignoring smp_cpus"
+                " value.\n",
+                exynos4_machines[board_type].name,
+                exynos4_machines[board_type].max_cpus);
+    }
+
+    exynos4_board_binfo.ram_size = exynos4_board_ram_size[board_type];
+    exynos4_board_binfo.board_id = exynos4_board_id[board_type];
+    exynos4_board_binfo.smp_bootreg_addr =
+            exynos4_board_smp_bootreg_addr[board_type];
+    exynos4_board_binfo.kernel_filename = args->kernel_filename;
+    exynos4_board_binfo.initrd_filename = args->initrd_filename;
+    exynos4_board_binfo.kernel_cmdline = args->kernel_cmdline;
+    exynos4_board_binfo.gic_cpu_if_addr =
+            EXYNOS4210_SMP_PRIVATE_BASE_ADDR + 0x100;
+
+    PRINT_DEBUG("\n ram_size: %luMiB [0x%08lx]\n"
+            " kernel_filename: %s\n"
+            " kernel_cmdline: %s\n"
+            " initrd_filename: %s\n",
+            exynos4_board_ram_size[board_type] / 1048576,
+            exynos4_board_ram_size[board_type],
+            args->kernel_filename,
+            args->kernel_cmdline,
+            args->initrd_filename);
+
+    return exynos4210_init(get_system_memory(),
+            exynos4_board_ram_size[board_type]);
+}
+
+static void nuri_init(QEMUMachineInitArgs *args)
+{
+    exynos4_boards_init_common(args, EXYNOS4_BOARD_NURI);
+
+    arm_load_kernel(arm_env_get_cpu(first_cpu), &exynos4_board_binfo);
+}
+
+static void smdkc210_init(QEMUMachineInitArgs *args)
+{
+    Exynos4210State *s = exynos4_boards_init_common(args,
+                                                    EXYNOS4_BOARD_SMDKC210);
+
+    lan9215_init(SMDK_LAN9118_BASE_ADDR,
+            qemu_irq_invert(s->irq_table[exynos4210_get_irq(37, 1)]));
+    arm_load_kernel(arm_env_get_cpu(first_cpu), &exynos4_board_binfo);
+}
+
+static QEMUMachine exynos4_machines[EXYNOS4_NUM_OF_BOARDS] = {
+    [EXYNOS4_BOARD_NURI] = {
+        .name = "nuri",
+        .desc = "Samsung NURI board (Exynos4210)",
+        .init = nuri_init,
+        .max_cpus = EXYNOS4210_NCPUS,
+        DEFAULT_MACHINE_OPTIONS,
+    },
+    [EXYNOS4_BOARD_SMDKC210] = {
+        .name = "smdkc210",
+        .desc = "Samsung SMDKC210 board (Exynos4210)",
+        .init = smdkc210_init,
+        .max_cpus = EXYNOS4210_NCPUS,
+        DEFAULT_MACHINE_OPTIONS,
+    },
+};
+
+static void exynos4_machine_init(void)
+{
+    qemu_register_machine(&exynos4_machines[EXYNOS4_BOARD_NURI]);
+    qemu_register_machine(&exynos4_machines[EXYNOS4_BOARD_SMDKC210]);
+}
+
+machine_init(exynos4_machine_init);