Merge remote-tracking branch 'remotes/riscv/tags/riscv-qemu-upstream-v8.2' into staging

QEMU RISC-V Emulation Support (RV64GC, RV32GC)

This release renames the SiFive machines to sifive_e and sifive_u
to represent the SiFive Everywhere and SiFive Unleashed platforms.
SiFive has configurable soft-core IP, so it is intended that these
machines will be extended to enable a variety of SiFive IP blocks.
The CPU definition infrastructure has been improved and there are
now vendor CPU modules including the SiFiVe E31, E51, U34 and U54
cores. The emulation accuracy for the E series has been improved
by disabling the MMU for the E series. S mode has been disabled on
cores that only support M mode and U mode. The two Spike machines
that support two privileged ISA versions have been coalesced into
one file. This series has Signed-off-by from the core contributors.

*** Known Issues ***

* Disassembler has some checkpatch warnings for the sake of code brevity
* scripts/qemu-binfmt-conf.sh has checkpatch warnings due to line length
* PMP (Physical Memory Protection) is as-of-yet unused and needs testing

*** Changelog ***

v8.2

* Rebase

v8.1

* Fix missed case of renaming spike_v1.9 to spike_v1.9.1

v8

* Added linux-user/riscv/target_elf.h during rebase
* Make resetvec configurable and clear mpp and mie on reset
* Use SiFive E31, E51, U34 and U54 cores in SiFive machines
* Define SiFive E31, E51, U34 and U54 cores
* Refactor CPU core definition in preparation for vendor cores
* Prevent S or U mode unless S or U extensions are present
* SiFive E Series cores have no MMU
* SiFive E Series cores have U mode
* Make privileged ISA v1.10 implicit in CPU types
* Remove DRAM_BASE and EXT_IO_BASE as they vary by machine
* Correctly handle mtvec and stvec alignment with respect to RVC
* Print more machine mode state in riscv_cpu_dump_state
* Make riscv_isa_string use compact extension order method
* Fix bug introduced in v6 RISCV_CPU_TYPE_NAME macro change
* Parameterize spike v1.9.1 config string
* Coalesce spike_v1.9.1 and spike_v1.10 machines
* Rename sifive_e300 to sifive_e, and sifive_u500 to sifive_u

v7

* Make spike_v1.10 the default machine
* Rename spike_v1.9 to spike_v1.9.1 to match privileged spec version
* Remove empty target/riscv/trace-events file
* Monitor ROM 32-bit reset code needs to be target endian
* Add TARGET_TIOCGPTPEER to linux-user/riscv/termbits.h
* Add -initrd support to the virt board
* Fix naming in spike machine interface header
* Update copyright notice on RISC-V Spike machines
* Update copyright notice on RISC-V HTIF Console device
* Change CPU Core and translator to GPLv2+
* Change RISC-V Disassembler to GPLv2+
* Change SiFive Test Finisher to GPLv2+
* Change SiFive CLINT to GPLv2+
* Change SiFive PRCI to GPLv2+
* Change SiFive PLIC to GPLv2+
* Change RISC-V spike machines to GPLv2+
* Change RISC-V virt machine to GPLv2+
* Change SiFive E300 machine to GPLv2+
* Change SiFive U500 machine to GPLv2+
* Change RISC-V Hart Array to GPLv2+
* Change RISC-V HTIF device to GPLv2+
* Change SiFiveUART device to GPLv2+

v6

* Drop IEEE 754-201x minimumNumber/maximumNumber for fmin/fmax
* Remove some unnecessary commented debug statements
* Change RISCV_CPU_TYPE_NAME to use riscv-cpu suffix
* Define all CPU variants for linux-user
* qemu_log calls require trailing \n
* Replace PLIC printfs with qemu_log
* Tear out unused HTIF code and eliminate shouting debug messages
* Fix illegal instruction when sfence.vma is passed (rs2) arguments
* Make updates to PTE accessed and dirty bits atomic
* Only require atomic PTE updates on MTTCG enabled guests
* Page fault if accessed or dirty bits can't be updated
* Fix get_physical_address PTE reads and writes on riscv32
* Remove erroneous comments from the PLIC
* Default enable MTTCG
* Make WFI less conservative
* Unify local interrupt handling
* Expunge HTIF interrupts
* Always access mstatus.mip under a lock
* Don't implement rdtime/rdtimeh in system mode (bbl emulates them)
* Implement insreth/cycleh for rv32 and always enable user-mode counters
* Add GDB stub support for reading and writing CSRs
* Rename ENABLE_CHARDEV #ifdef from HTIF code
* Replace bad HTIF ELF code with load_elf symbol callback
* Convert chained if else fault handlers to switch statements
* Use RISCV exception codes for linux-user page faults

v5

* Implement NaN-boxing for flw, set high order bits to 1
* Use float_muladd_negate_* flags to floatXX_muladd
* Use IEEE 754-201x minimumNumber/maximumNumber for fmin/fmax
* Fix TARGET_NR_syscalls
* Update linux-user/riscv/syscall_nr.h
* Fix FENCE.I, needs to terminate translation block
* Adjust unusual convention for interruptno >= 0

v4

* Add @riscv: since 2.12 to CpuInfoArch
* Remove misleading little-endian comment from load_kernel
* Rename cpu-model property to cpu-type
* Drop some unnecessary inline function attributes
* Don't allow GDB to set value of x0 register
* Remove unnecessary empty property lists
* Add Test Finisher device to implement poweroff in virt machine
* Implement priv ISA v1.10 trap and sret/mret xPIE/xIE behavior
* Store fflags data in fp_status
* Purge runtime users of helper_raise_exception
* Fix validate_csr
* Tidy gen_jalr
* Tidy immediate shifts
* Add gen_exception_inst_addr_mis
* Add gen_exception_debug
* Add gen_exception_illegal
* Tidy helper_fclass_*
* Split rounding mode setting to a new function
* Enforce MSTATUS_FS via TB flags
* Implement acquire/release barrier semantics
* Use atomic operations as required
* Fix FENCE and FENCE_I
* Remove commented code from spike machines
* PAGE_WRITE permissions can be set on loads if page is already dirty
* The result of format conversion on an NaN must be a quiet NaN
* Add missing process_queued_cpu_work to riscv linux-user
* Remove float(32|64)_classify from cpu.h
* Removed nonsensical unions aliasing the same type
* Use uintN_t instead of uintN_fast_t in fpu_helper.c
* Use macros for FPU exception values in softfloat_flags_to_riscv
* Move code to set round mode into set_fp_round_mode function
* Convert set_fp_exceptions from a macro to an inline function
* Convert round mode helper into an inline function
* Make fpu_helper ieee_rm array static const
* Include cpu_mmu_index in cpu_get_tb_cpu_state flags
* Eliminate MPRV influence on mmu_index
* Remove unrecoverable do_unassigned_access function
* Only update PTE accessed and dirty bits if necessary
* Remove unnecessary tlb_flush in set_mode as mode is in mmu_idx
* Remove buggy support for misa writes. misa writes are optional
  and are not implemented in any known hardware
* Always set PTE read or execute permissions during page walk
* Reorder helper function declarations to match order in helper.c
* Remove redundant variable declaration in get_physical_address
* Remove duplicated code from get_physical_address
* Use mmu_idx instead of mem_idx in riscv_cpu_get_phys_page_debug

v3

* Fix indentation in PMP and HTIF debug macros
* Fix disassembler checkpatch open brace '{' on next line errors
* Fix trailing statements on next line in decode_inst_decompress
* NOTE: the other checkpatch issues have been reviewed previously

v2

* Remove redundant NULL terminators from disassembler register arrays
* Change disassembler register name arrays to const
* Refine disassembler internal function names
* Update dates in disassembler copyright message
* Remove #ifdef CONFIG_USER_ONLY version of cpu_has_work
* Use ULL suffix on 64-bit constants
* Move riscv_cpu_mmu_index from cpu.h to helper.c
* Move riscv_cpu_hw_interrupts_pending from cpu.h to helper.c
* Remove redundant TARGET_HAS_ICE from cpu.h
* Use qemu_irq instead of void* for irq definition in cpu.h
* Remove duplicate typedef from struct CPURISCVState
* Remove redundant g_strdup from cpu_register
* Remove redundant tlb_flush from riscv_cpu_reset
* Remove redundant mode calculation from get_physical_address
* Remove redundant debug mode printf and dcsr comment
* Remove redundant clearing of MSB for bare physical addresses
* Use g_assert_not_reached for invalid mode in get_physical_address
* Use g_assert_not_reached for unreachable checks in get_physical_address
* Use g_assert_not_reached for unreachable type in raise_mmu_exception
* Return exception instead of aborting for misaligned fetches
* Move exception defines from cpu.h to cpu_bits.h
* Remove redundant breakpoint control definitions from cpu_bits.h
* Implement riscv_cpu_unassigned_access exception handling
* Log and raise exceptions for unimplemented CSRs
* Match Spike HTIF exit behavior - don’t print TEST-PASSED
* Make frm,fflags,fcsr writes trap when mstatus.FS is clear
* Use g_assert_not_reached for unreachable invalid mode
* Make hret,uret,dret generate illegal instructions
* Move riscv_cpu_dump_state and int/fpr regnames to cpu.c
* Lift interrupt flag and mask into constants in cpu_bits.h
* Change trap debugging to use qemu_log_mask LOG_TRACE
* Change CSR debugging to use qemu_log_mask LOG_TRACE
* Change PMP debugging to use qemu_log_mask LOG_TRACE
* Remove commented code from pmp.c
* Change CpuInfoRISCV qapi schema docs to Since 2.12
* Change RV feature macro to use target_ulong cast
* Remove riscv_feature and instead use misa extension flags
* Make riscv_flush_icache_syscall a no-op
* Undo checkpatch whitespace fixes in unrelated linux-user code
* Remove redudant constants and tidy up cpu_bits.h
* Make helper_fence_i a no-op
* Move include "exec/cpu-all" to end of cpu.h
* Rename set_privilege to riscv_set_mode
* Move redundant forward declaration for cpu_riscv_translate_address
* Remove TCGV_UNUSED from riscv_translate_init
* Add comment to pmp.c stating the code is untested and currently unused
* Use ctz to simplify decoding of PMP NAPOT address ranges
* Change pmp_is_in_range to use than equal for end addresses
* Fix off by one error in pmp_update_rule
* Rearrange PMP_DEBUG so that formatting is compile-time checked
* Rearrange trap debugging so that formatting is compile-time checked
* Rearrange PLIC debugging so that formatting is compile-time checked
* Use qemu_log/qemu_log_mask for HTIF logging and debugging
* Move exception and interrupt names into cpu.c
* Add Palmer Dabbelt as a RISC-V Maintainer
* Rebase against current qemu master branch

v1

* initial version based on forward port from riscv-qemu repository

*** Background ***

"RISC-V is an open, free ISA enabling a new era of processor innovation
through open standard collaboration. Born in academia and research,
RISC-V ISA delivers a new level of free, extensible software and
hardware freedom on architecture, paving the way for the next 50 years
of computing design and innovation."

The QEMU RISC-V port has been developed and maintained out-of-tree for
several years by Sagar Karandikar and Bastian Koppelmann. The RISC-V
Privileged specification has evolved substantially over this period but
has recently been solidifying. The RISC-V Base ISA has been frozon for
some time and the Privileged ISA, GCC toolchain and Linux ABI are now
quite stable. I have recently joined Sagar and Bastian as a RISC-V QEMU
Maintainer and hope to support upstreaming the port.

There are multiple vendors taping out, preparing to ship, or shipping
silicon that implements the RISC-V Privileged ISA Version 1.10. There
are also several RISC-V Soft-IP cores implementing Privileged ISA
Version 1.10 that run on FPGA such as SiFive's Freedom U500 Platform
and the U54‑MC RISC-V Core IP, among many more implementations from a
variety of vendors. See https://riscv.org/ for more details.

RISC-V support was upstreamed in binutils 2.28 and GCC 7.1 in the first
half of 2016. RISC-V support is now available in LLVM top-of-tree and
the RISC-V Linux port was accepted into Linux 4.15-rc1 late last year
and is available in the Linux 4.15 release. GLIBC 2.27 added support
for the RISC-V ISA running on Linux (requires at least binutils-2.30,
gcc-7.3.0, and linux-4.15). We believe it is timely to submit the
RISC-V QEMU port for upstream review with the goal of incorporating
RISC-V support into the upcoming QEMU 2.12 release.

The RISC-V QEMU port is still under active development, mostly with
respect to device emulation, the addition of Hypervisor support as
specified in the RISC-V Draft Privileged ISA Version 1.11, and Vector
support once the first draft is finalized later this year. We believe
now is the appropriate time for RISC-V QEMU development to be carried
out in the main QEMU repository as the code will benefit from more
rigorous review. The RISC-V QEMU port currently supports all the ISA
extensions that have been finalized and frozen in the Base ISA.

Blog post about recent additions to RISC-V QEMU: https://goo.gl/fJ4zgk

The RISC-V QEMU wiki: https://github.com/riscv/riscv-qemu/wiki

Instructions for building a busybox+dropbear root image, BBL (Berkeley
Boot Loader) and linux kernel image for use with the RISC-V QEMU
'virt' machine: https://github.com/michaeljclark/busybear-linux

*** Overview ***

The RISC-V QEMU port implements the following specifications:

* RISC-V Instruction Set Manual Volume I: User-Level ISA Version 2.2
* RISC-V Instruction Set Manual Volume II: Privileged ISA Version 1.9.1
* RISC-V Instruction Set Manual Volume II: Privileged ISA Version 1.10

The RISC-V QEMU port supports the following instruction set extensions:

* RV32GC with Supervisor-mode and User-mode (RV32IMAFDCSU)
* RV64GC with Supervisor-mode and User-mode (RV64IMAFDCSU)

The RISC-V QEMU port adds the following targets to QEMU:

* riscv32-softmmu
* riscv64-softmmu
* riscv32-linux-user
* riscv64-linux-user

The RISC-V QEMU port supports the following hardware:

* HTIF Console (Host Target Interface)
* SiFive CLINT (Core Local Interruptor) for Timer interrupts and IPIs
* SiFive PLIC (Platform Level Interrupt Controller)
* SiFive Test (Test Finisher) for exiting simulation
* SiFive UART, PRCI, AON, PWM, QSPI support is partially implemented
* VirtIO MMIO (GPEX PCI support will be added in a future patch)
* Generic 16550A UART emulation using 'hw/char/serial.c'
* MTTCG and SMP support (PLIC and CLINT) on the 'virt' machine

The RISC-V QEMU full system emulator supports 5 machines:

* 'spike_v1.9.1', CLINT, PLIC, HTIF console, config-string, Priv v1.9.1
* 'spike_v1.10', CLINT, PLIC, HTIF console, device-tree, Priv v1.10
* 'sifive_e', CLINT, PLIC, SiFive UART, HiFive1 compat, Priv v1.10
* 'sifive_u', CLINT, PLIC, SiFive UART, device-tree, Priv v1.10
* 'virt', CLINT, PLIC, 16550A UART, VirtIO, device-tree, Priv v1.10

This is a list of RISC-V QEMU Port Contributors:

* Alex Suykov
* Andreas Schwab
* Antony Pavlov
* Bastian Koppelmann
* Bruce Hoult
* Chih-Min Chao
* Daire McNamara
* Darius Rad
* David Abdurachmanov
* Hesham Almatary
* Ivan Griffin
* Jim Wilson
* Kito Cheng
* Michael Clark
* Palmer Dabbelt
* Richard Henderson
* Sagar Karandikar
* Shea Levy
* Stefan O'Rear

Notes:

* contributor email addresses available off-list on request.
* checkpatch has been run on all 23 patches.
* checkpatch exceptions are noted in patches that have errors.
* passes "make check" on full build for all targets
* tested riscv-linux-4.6.2 on 'spike_v1.9.1' machine
* tested riscv-linux-4.15 on 'spike_v1.10' and 'virt' machines
* tested SiFive HiFive1 binaries in 'sifive_e' machine
* tested RV64 on 32-bit i386

This patch series includes the following patches:

# gpg: Signature made Thu 08 Mar 2018 19:40:20 GMT
# gpg:                using DSA key 6BF1D7B357EF3E4F
# gpg: Good signature from "Michael Clark <michaeljclark@mac.com>"
# gpg:                 aka "Michael Clark <mjc@sifive.com>"
# gpg:                 aka "Michael Clark <michael@metaparadigm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7C99 930E B17C D8BA 073D  5EFA 6BF1 D7B3 57EF 3E4F

* remotes/riscv/tags/riscv-qemu-upstream-v8.2: (23 commits)
  RISC-V Build Infrastructure
  SiFive Freedom U Series RISC-V Machine
  SiFive Freedom E Series RISC-V Machine
  SiFive RISC-V PRCI Block
  SiFive RISC-V UART Device
  RISC-V VirtIO Machine
  SiFive RISC-V Test Finisher
  RISC-V Spike Machines
  SiFive RISC-V PLIC Block
  SiFive RISC-V CLINT Block
  RISC-V HART Array
  RISC-V HTIF Console
  Add symbol table callback interface to load_elf
  RISC-V Linux User Emulation
  RISC-V Physical Memory Protection
  RISC-V TCG Code Generation
  RISC-V GDB Stub
  RISC-V FPU Support
  RISC-V CPU Helpers
  RISC-V Disassembler
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

1 files changed, 287 insertions, 0 deletions

diff --git a/linux-user/riscv/syscall_nr.h b/linux-user/riscv/syscall_nr.h
new file mode 100644
index 0000000000..7e30f1f1ef
--- /dev/null
+++ b/linux-user/riscv/syscall_nr.h
@@ -0,0 +1,287 @@
+/*
+ * Syscall numbers from asm-generic, common for most
+ * of recently-added arches including RISC-V.
+ */
+
+#define TARGET_NR_io_setup 0
+#define TARGET_NR_io_destroy 1
+#define TARGET_NR_io_submit 2
+#define TARGET_NR_io_cancel 3
+#define TARGET_NR_io_getevents 4
+#define TARGET_NR_setxattr 5
+#define TARGET_NR_lsetxattr 6
+#define TARGET_NR_fsetxattr 7
+#define TARGET_NR_getxattr 8
+#define TARGET_NR_lgetxattr 9
+#define TARGET_NR_fgetxattr 10
+#define TARGET_NR_listxattr 11
+#define TARGET_NR_llistxattr 12
+#define TARGET_NR_flistxattr 13
+#define TARGET_NR_removexattr 14
+#define TARGET_NR_lremovexattr 15
+#define TARGET_NR_fremovexattr 16
+#define TARGET_NR_getcwd 17
+#define TARGET_NR_lookup_dcookie 18
+#define TARGET_NR_eventfd2 19
+#define TARGET_NR_epoll_create1 20
+#define TARGET_NR_epoll_ctl 21
+#define TARGET_NR_epoll_pwait 22
+#define TARGET_NR_dup 23
+#define TARGET_NR_dup3 24
+#ifdef TARGET_RISCV32
+#define TARGET_NR_fcntl64 25
+#else
+#define TARGET_NR_fcntl 25
+#endif
+#define TARGET_NR_inotify_init1 26
+#define TARGET_NR_inotify_add_watch 27
+#define TARGET_NR_inotify_rm_watch 28
+#define TARGET_NR_ioctl 29
+#define TARGET_NR_ioprio_set 30
+#define TARGET_NR_ioprio_get 31
+#define TARGET_NR_flock 32
+#define TARGET_NR_mknodat 33
+#define TARGET_NR_mkdirat 34
+#define TARGET_NR_unlinkat 35
+#define TARGET_NR_symlinkat 36
+#define TARGET_NR_linkat 37
+#define TARGET_NR_renameat 38
+#define TARGET_NR_umount2 39
+#define TARGET_NR_mount 40
+#define TARGET_NR_pivot_root 41
+#define TARGET_NR_nfsservctl 42
+#define TARGET_NR_statfs 43
+#define TARGET_NR_fstatfs 44
+#define TARGET_NR_truncate 45
+#define TARGET_NR_ftruncate 46
+#define TARGET_NR_fallocate 47
+#define TARGET_NR_faccessat 48
+#define TARGET_NR_chdir 49
+#define TARGET_NR_fchdir 50
+#define TARGET_NR_chroot 51
+#define TARGET_NR_fchmod 52
+#define TARGET_NR_fchmodat 53
+#define TARGET_NR_fchownat 54
+#define TARGET_NR_fchown 55
+#define TARGET_NR_openat 56
+#define TARGET_NR_close 57
+#define TARGET_NR_vhangup 58
+#define TARGET_NR_pipe2 59
+#define TARGET_NR_quotactl 60
+#define TARGET_NR_getdents64 61
+#define TARGET_NR_lseek 62
+#define TARGET_NR_read 63
+#define TARGET_NR_write 64
+#define TARGET_NR_readv 65
+#define TARGET_NR_writev 66
+#define TARGET_NR_pread64 67
+#define TARGET_NR_pwrite64 68
+#define TARGET_NR_preadv 69
+#define TARGET_NR_pwritev 70
+#define TARGET_NR_sendfile 71
+#define TARGET_NR_pselect6 72
+#define TARGET_NR_ppoll 73
+#define TARGET_NR_signalfd4 74
+#define TARGET_NR_vmsplice 75
+#define TARGET_NR_splice 76
+#define TARGET_NR_tee 77
+#define TARGET_NR_readlinkat 78
+#define TARGET_NR_newfstatat 79
+#define TARGET_NR_fstat 80
+#define TARGET_NR_sync 81
+#define TARGET_NR_fsync 82
+#define TARGET_NR_fdatasync 83
+#define TARGET_NR_sync_file_range 84
+#define TARGET_NR_timerfd_create 85
+#define TARGET_NR_timerfd_settime 86
+#define TARGET_NR_timerfd_gettime 87
+#define TARGET_NR_utimensat 88
+#define TARGET_NR_acct 89
+#define TARGET_NR_capget 90
+#define TARGET_NR_capset 91
+#define TARGET_NR_personality 92
+#define TARGET_NR_exit 93
+#define TARGET_NR_exit_group 94
+#define TARGET_NR_waitid 95
+#define TARGET_NR_set_tid_address 96
+#define TARGET_NR_unshare 97
+#define TARGET_NR_futex 98
+#define TARGET_NR_set_robust_list 99
+#define TARGET_NR_get_robust_list 100
+#define TARGET_NR_nanosleep 101
+#define TARGET_NR_getitimer 102
+#define TARGET_NR_setitimer 103
+#define TARGET_NR_kexec_load 104
+#define TARGET_NR_init_module 105
+#define TARGET_NR_delete_module 106
+#define TARGET_NR_timer_create 107
+#define TARGET_NR_timer_gettime 108
+#define TARGET_NR_timer_getoverrun 109
+#define TARGET_NR_timer_settime 110
+#define TARGET_NR_timer_delete 111
+#define TARGET_NR_clock_settime 112
+#define TARGET_NR_clock_gettime 113
+#define TARGET_NR_clock_getres 114
+#define TARGET_NR_clock_nanosleep 115
+#define TARGET_NR_syslog 116
+#define TARGET_NR_ptrace 117
+#define TARGET_NR_sched_setparam 118
+#define TARGET_NR_sched_setscheduler 119
+#define TARGET_NR_sched_getscheduler 120
+#define TARGET_NR_sched_getparam 121
+#define TARGET_NR_sched_setaffinity 122
+#define TARGET_NR_sched_getaffinity 123
+#define TARGET_NR_sched_yield 124
+#define TARGET_NR_sched_get_priority_max 125
+#define TARGET_NR_sched_get_priority_min 126
+#define TARGET_NR_sched_rr_get_interval 127
+#define TARGET_NR_restart_syscall 128
+#define TARGET_NR_kill 129
+#define TARGET_NR_tkill 130
+#define TARGET_NR_tgkill 131
+#define TARGET_NR_sigaltstack 132
+#define TARGET_NR_rt_sigsuspend 133
+#define TARGET_NR_rt_sigaction 134
+#define TARGET_NR_rt_sigprocmask 135
+#define TARGET_NR_rt_sigpending 136
+#define TARGET_NR_rt_sigtimedwait 137
+#define TARGET_NR_rt_sigqueueinfo 138
+#define TARGET_NR_rt_sigreturn 139
+#define TARGET_NR_setpriority 140
+#define TARGET_NR_getpriority 141
+#define TARGET_NR_reboot 142
+#define TARGET_NR_setregid 143
+#define TARGET_NR_setgid 144
+#define TARGET_NR_setreuid 145
+#define TARGET_NR_setuid 146
+#define TARGET_NR_setresuid 147
+#define TARGET_NR_getresuid 148
+#define TARGET_NR_setresgid 149
+#define TARGET_NR_getresgid 150
+#define TARGET_NR_setfsuid 151
+#define TARGET_NR_setfsgid 152
+#define TARGET_NR_times 153
+#define TARGET_NR_setpgid 154
+#define TARGET_NR_getpgid 155
+#define TARGET_NR_getsid 156
+#define TARGET_NR_setsid 157
+#define TARGET_NR_getgroups 158
+#define TARGET_NR_setgroups 159
+#define TARGET_NR_uname 160
+#define TARGET_NR_sethostname 161
+#define TARGET_NR_setdomainname 162
+#define TARGET_NR_getrlimit 163
+#define TARGET_NR_setrlimit 164
+#define TARGET_NR_getrusage 165
+#define TARGET_NR_umask 166
+#define TARGET_NR_prctl 167
+#define TARGET_NR_getcpu 168
+#define TARGET_NR_gettimeofday 169
+#define TARGET_NR_settimeofday 170
+#define TARGET_NR_adjtimex 171
+#define TARGET_NR_getpid 172
+#define TARGET_NR_getppid 173
+#define TARGET_NR_getuid 174
+#define TARGET_NR_geteuid 175
+#define TARGET_NR_getgid 176
+#define TARGET_NR_getegid 177
+#define TARGET_NR_gettid 178
+#define TARGET_NR_sysinfo 179
+#define TARGET_NR_mq_open 180
+#define TARGET_NR_mq_unlink 181
+#define TARGET_NR_mq_timedsend 182
+#define TARGET_NR_mq_timedreceive 183
+#define TARGET_NR_mq_notify 184
+#define TARGET_NR_mq_getsetattr 185
+#define TARGET_NR_msgget 186
+#define TARGET_NR_msgctl 187
+#define TARGET_NR_msgrcv 188
+#define TARGET_NR_msgsnd 189
+#define TARGET_NR_semget 190
+#define TARGET_NR_semctl 191
+#define TARGET_NR_semtimedop 192
+#define TARGET_NR_semop 193
+#define TARGET_NR_shmget 194
+#define TARGET_NR_shmctl 195
+#define TARGET_NR_shmat 196
+#define TARGET_NR_shmdt 197
+#define TARGET_NR_socket 198
+#define TARGET_NR_socketpair 199
+#define TARGET_NR_bind 200
+#define TARGET_NR_listen 201
+#define TARGET_NR_accept 202
+#define TARGET_NR_connect 203
+#define TARGET_NR_getsockname 204
+#define TARGET_NR_getpeername 205
+#define TARGET_NR_sendto 206
+#define TARGET_NR_recvfrom 207
+#define TARGET_NR_setsockopt 208
+#define TARGET_NR_getsockopt 209
+#define TARGET_NR_shutdown 210
+#define TARGET_NR_sendmsg 211
+#define TARGET_NR_recvmsg 212
+#define TARGET_NR_readahead 213
+#define TARGET_NR_brk 214
+#define TARGET_NR_munmap 215
+#define TARGET_NR_mremap 216
+#define TARGET_NR_add_key 217
+#define TARGET_NR_request_key 218
+#define TARGET_NR_keyctl 219
+#define TARGET_NR_clone 220
+#define TARGET_NR_execve 221
+#ifdef TARGET_RISCV32
+#define TARGET_NR_mmap2 222
+#define TARGET_NR_fadvise64_64 223
+#else
+#define TARGET_NR_mmap 222
+#define TARGET_NR_fadvise64 223
+#endif
+#define TARGET_NR_swapon 224
+#define TARGET_NR_swapoff 225
+#define TARGET_NR_mprotect 226
+#define TARGET_NR_msync 227
+#define TARGET_NR_mlock 228
+#define TARGET_NR_munlock 229
+#define TARGET_NR_mlockall 230
+#define TARGET_NR_munlockall 231
+#define TARGET_NR_mincore 232
+#define TARGET_NR_madvise 233
+#define TARGET_NR_remap_file_pages 234
+#define TARGET_NR_mbind 235
+#define TARGET_NR_get_mempolicy 236
+#define TARGET_NR_set_mempolicy 237
+#define TARGET_NR_migrate_pages 238
+#define TARGET_NR_move_pages 239
+#define TARGET_NR_rt_tgsigqueueinfo 240
+#define TARGET_NR_perf_event_open 241
+#define TARGET_NR_accept4 242
+#define TARGET_NR_recvmmsg 243
+#define TARGET_NR_arch_specific_syscall 244
+#define TARGET_NR_wait4 260
+#define TARGET_NR_prlimit64 261
+#define TARGET_NR_fanotify_init 262
+#define TARGET_NR_fanotify_mark 263
+#define TARGET_NR_name_to_handle_at 264
+#define TARGET_NR_open_by_handle_at 265
+#define TARGET_NR_clock_adjtime 266
+#define TARGET_NR_syncfs 267
+#define TARGET_NR_setns 268
+#define TARGET_NR_sendmmsg 269
+#define TARGET_NR_process_vm_readv 270
+#define TARGET_NR_process_vm_writev 271
+#define TARGET_NR_kcmp 272
+#define TARGET_NR_finit_module 273
+#define TARGET_NR_sched_setattr 274
+#define TARGET_NR_sched_getattr 275
+#define TARGET_NR_renameat2 276
+#define TARGET_NR_seccomp 277
+#define TARGET_NR_getrandom 278
+#define TARGET_NR_memfd_create 279
+#define TARGET_NR_bpf 280
+#define TARGET_NR_execveat 281
+#define TARGET_NR_userfaultfd 282
+#define TARGET_NR_membarrier 283
+#define TARGET_NR_mlock2 284
+#define TARGET_NR_copy_file_range 285
+
+#define TARGET_NR_syscalls (TARGET_NR_copy_file_range + 1)