diff options
Diffstat (limited to 'configure')
| -rwxr-xr-x | configure | 238 |
1 files changed, 94 insertions, 144 deletions
@@ -1779,8 +1779,13 @@ fi container="no" if test $use_containers = "yes"; then - if has "docker" || has "podman"; then - container=$($python "$source_path"/tests/docker/docker.py probe) + case $($python "$source_path"/tests/docker/docker.py probe) in + *docker) container=docker ;; + podman) container=podman ;; + no) container=no ;; + esac + if test "$container" != "no"; then + docker_py="$python $source_path/tests/docker/docker.py --engine $container" fi fi @@ -2116,54 +2121,54 @@ probe_target_compiler() { target_ranlib= target_strip= fi + test -n "$target_cc" || test -n "$container_image" } write_target_makefile() { echo "EXTRA_CFLAGS=$target_cflags" - if test -n "$target_cc"; then - echo "CC=$target_cc" - echo "CCAS=$target_ccas" - fi - if test -n "$target_ar"; then - echo "AR=$target_ar" - fi - if test -n "$target_as"; then - echo "AS=$target_as" - fi - if test -n "$target_ld"; then - echo "LD=$target_ld" - fi - if test -n "$target_nm"; then - echo "NM=$target_nm" - fi - if test -n "$target_objcopy"; then - echo "OBJCOPY=$target_objcopy" - fi - if test -n "$target_ranlib"; then - echo "RANLIB=$target_ranlib" - fi - if test -n "$target_strip"; then - echo "STRIP=$target_strip" - fi -} - -write_container_target_makefile() { - echo "EXTRA_CFLAGS=$target_cflags" - if test -n "$container_cross_cc"; then - echo "CC=\$(DOCKER_SCRIPT) cc --cc $container_cross_cc -i qemu/$container_image -s $source_path --" - echo "CCAS=\$(DOCKER_SCRIPT) cc --cc $container_cross_cc -i qemu/$container_image -s $source_path --" + if test -z "$target_cc" && test -z "$target_as"; then + test -z "$container_image" && error_exit "Internal error: could not find cross compiler for $1?" + echo "$1: docker-image-$container_image" >> Makefile.prereqs + if test -n "$container_cross_cc"; then + echo "CC=$docker_py cc --cc $container_cross_cc -i qemu/$container_image -s $source_path --" + echo "CCAS=$docker_py cc --cc $container_cross_cc -i qemu/$container_image -s $source_path --" + fi + echo "AR=$docker_py cc --cc $container_cross_ar -i qemu/$container_image -s $source_path --" + echo "AS=$docker_py cc --cc $container_cross_as -i qemu/$container_image -s $source_path --" + echo "LD=$docker_py cc --cc $container_cross_ld -i qemu/$container_image -s $source_path --" + echo "NM=$docker_py cc --cc $container_cross_nm -i qemu/$container_image -s $source_path --" + echo "OBJCOPY=$docker_py cc --cc $container_cross_objcopy -i qemu/$container_image -s $source_path --" + echo "RANLIB=$docker_py cc --cc $container_cross_ranlib -i qemu/$container_image -s $source_path --" + echo "STRIP=$docker_py cc --cc $container_cross_strip -i qemu/$container_image -s $source_path --" + else + if test -n "$target_cc"; then + echo "CC=$target_cc" + echo "CCAS=$target_ccas" + fi + if test -n "$target_ar"; then + echo "AR=$target_ar" + fi + if test -n "$target_as"; then + echo "AS=$target_as" + fi + if test -n "$target_ld"; then + echo "LD=$target_ld" + fi + if test -n "$target_nm"; then + echo "NM=$target_nm" + fi + if test -n "$target_objcopy"; then + echo "OBJCOPY=$target_objcopy" + fi + if test -n "$target_ranlib"; then + echo "RANLIB=$target_ranlib" + fi + if test -n "$target_strip"; then + echo "STRIP=$target_strip" + fi fi - echo "AR=\$(DOCKER_SCRIPT) cc --cc $container_cross_ar -i qemu/$container_image -s $source_path --" - echo "AS=\$(DOCKER_SCRIPT) cc --cc $container_cross_as -i qemu/$container_image -s $source_path --" - echo "LD=\$(DOCKER_SCRIPT) cc --cc $container_cross_ld -i qemu/$container_image -s $source_path --" - echo "NM=\$(DOCKER_SCRIPT) cc --cc $container_cross_nm -i qemu/$container_image -s $source_path --" - echo "OBJCOPY=\$(DOCKER_SCRIPT) cc --cc $container_cross_objcopy -i qemu/$container_image -s $source_path --" - echo "RANLIB=\$(DOCKER_SCRIPT) cc --cc $container_cross_ranlib -i qemu/$container_image -s $source_path --" - echo "STRIP=\$(DOCKER_SCRIPT) cc --cc $container_cross_strip -i qemu/$container_image -s $source_path --" } - - ########################################## # check for vfio_user_server @@ -2237,7 +2242,6 @@ fi # tests might fail. Prefer to keep the relevant files in their own # directory and symlink the directory instead. LINKS="Makefile" -LINKS="$LINKS tests/tcg/Makefile.target" LINKS="$LINKS pc-bios/optionrom/Makefile" LINKS="$LINKS pc-bios/s390-ccw/Makefile" LINKS="$LINKS pc-bios/vof/Makefile" @@ -2253,45 +2257,50 @@ for f in $LINKS ; do fi done +echo "# Automatically generated by configure - do not modify" > Makefile.prereqs + # Mac OS X ships with a broken assembler roms= -probe_target_compiler i386-softmmu -if test -n "$target_cc" && - test "$targetos" != "darwin" && test "$targetos" != "sunos" && \ - test "$targetos" != "haiku" && test "$softmmu" = yes ; then +if test "$targetos" != "darwin" && test "$targetos" != "sunos" && \ + test "$targetos" != "haiku" && test "$softmmu" = yes && \ + probe_target_compiler i386-softmmu; then roms="pc-bios/optionrom" config_mak=pc-bios/optionrom/config.mak echo "# Automatically generated by configure - do not modify" > $config_mak echo "TOPSRC_DIR=$source_path" >> $config_mak - write_target_makefile >> $config_mak + write_target_makefile pc-bios/optionrom/all >> $config_mak fi -probe_target_compiler ppc-softmmu -if test -n "$target_cc" && test "$softmmu" = yes; then +if test "$softmmu" = yes && probe_target_compiler ppc-softmmu; then roms="$roms pc-bios/vof" config_mak=pc-bios/vof/config.mak echo "# Automatically generated by configure - do not modify" > $config_mak echo "SRC_DIR=$source_path/pc-bios/vof" >> $config_mak - write_target_makefile >> $config_mak + write_target_makefile pc-bios/vof/all >> $config_mak fi # Only build s390-ccw bios if the compiler has -march=z900 or -march=z10 # (which is the lowest architecture level that Clang supports) -probe_target_compiler s390x-softmmu -if test -n "$target_cc" && test "$softmmu" = yes; then - write_c_skeleton - do_compiler "$target_cc" $target_cc_cflags -march=z900 -o $TMPO -c $TMPC - has_z900=$? - if [ $has_z900 = 0 ] || do_compiler "$target_cc" $target_cc_cflags -march=z10 -msoft-float -Werror -o $TMPO -c $TMPC; then - if [ $has_z900 != 0 ]; then - echo "WARNING: Your compiler does not support the z900!" - echo " The s390-ccw bios will only work with guest CPUs >= z10." +if test "$softmmu" = yes && probe_target_compiler s390x-softmmu; then + got_cross_cc=no + if test -n "$target_cc"; then + write_c_skeleton + do_compiler "$target_cc" $target_cc_cflags -march=z900 -o $TMPO -c $TMPC + has_z900=$? + if [ $has_z900 = 0 ] || do_compiler "$target_cc" $target_cc_cflags -march=z10 -msoft-float -Werror -o $TMPO -c $TMPC; then + if [ $has_z900 != 0 ]; then + echo "WARNING: Your compiler does not support the z900!" + echo " The s390-ccw bios will only work with guest CPUs >= z10." + fi + got_cross_cc=yes fi + fi + if test "$got_cross_cc" = yes || test -n "$container_image"; then roms="$roms pc-bios/s390-ccw" config_mak=pc-bios/s390-ccw/config-host.mak echo "# Automatically generated by configure - do not modify" > $config_mak echo "SRC_PATH=$source_path/pc-bios/s390-ccw" >> $config_mak - write_target_makefile >> $config_mak + write_target_makefile pc-bios/s390-ccw/all >> $config_mak # SLOF is required for building the s390-ccw firmware on s390x, # since it is using the libnet code from SLOF for network booting. git_submodules="${git_submodules} roms/SLOF" @@ -2370,9 +2379,14 @@ if test -n "$gdb_bin"; then gdb_version=$($gdb_bin --version | head -n 1) if version_ge ${gdb_version##* } 9.1; then echo "HAVE_GDB_BIN=$gdb_bin" >> $config_host_mak + else + gdb_bin="" fi fi +if test "$container" != no; then + echo "ENGINE=$container" >> $config_host_mak +fi echo "ROMS=$roms" >> $config_host_mak echo "MAKE=$make" >> $config_host_mak echo "PYTHON=$python" >> $config_host_mak @@ -2445,22 +2459,21 @@ if test "$safe_stack" = "yes"; then fi # tests/tcg configuration -(makefile=tests/tcg/Makefile.prereqs -echo "# Automatically generated by configure - do not modify" > $makefile - -config_host_mak=tests/tcg/config-host.mak +(config_host_mak=tests/tcg/config-host.mak +mkdir -p tests/tcg echo "# Automatically generated by configure - do not modify" > $config_host_mak echo "SRC_PATH=$source_path" >> $config_host_mak echo "HOST_CC=$host_cc" >> $config_host_mak +# versioned checked in the main config_host.mak above +if test -n "$gdb_bin"; then + echo "HAVE_GDB_BIN=$gdb_bin" >> $config_host_mak +fi + tcg_tests_targets= for target in $target_list; do arch=${target%%-*} - config_target_mak=tests/tcg/config-$target.mak - - echo "# Automatically generated by configure - do not modify" > $config_target_mak - echo "TARGET_NAME=$arch" >> "$config_target_mak" case $target in xtensa*-linux-user) # the toolchain is not complete with headers, only build softmmu tests @@ -2475,85 +2488,22 @@ for target in $target_list; do ;; esac - probe_target_compiler $target - if test $got_cross_cc = yes; then - # Test for compiler features for optional tests. We only do this - # for cross compilers because ensuring the docker containers based - # compilers is a requirememt for adding a new test that needs a - # compiler feature. - + if probe_target_compiler $target; then + test -n "$container_image" && build_static=y + mkdir -p "tests/tcg/$target" + config_target_mak=tests/tcg/$target/config-target.mak + ln -sf "$source_path/tests/tcg/Makefile.target" "tests/tcg/$target/Makefile" + echo "# Automatically generated by configure - do not modify" > "$config_target_mak" + echo "TARGET_NAME=$arch" >> "$config_target_mak" + echo "TARGET=$target" >> "$config_target_mak" + write_target_makefile "build-tcg-tests-$target" >> "$config_target_mak" echo "BUILD_STATIC=$build_static" >> "$config_target_mak" - write_target_makefile >> "$config_target_mak" - case $target in - aarch64-*) - if do_compiler "$target_cc" $target_cflags \ - -march=armv8.1-a+sve -o $TMPE $TMPC; then - echo "CROSS_CC_HAS_SVE=y" >> "$config_target_mak" - fi - if do_compiler "$target_cc" $target_cflags \ - -march=armv8.1-a+sve2 -o $TMPE $TMPC; then - echo "CROSS_CC_HAS_SVE2=y" >> "$config_target_mak" - fi - if do_compiler "$target_cc" $target_cflags \ - -march=armv8.3-a -o $TMPE $TMPC; then - echo "CROSS_CC_HAS_ARMV8_3=y" >> "$config_target_mak" - fi - if do_compiler "$target_cc" $target_cflags \ - -mbranch-protection=standard -o $TMPE $TMPC; then - echo "CROSS_CC_HAS_ARMV8_BTI=y" >> "$config_target_mak" - fi - if do_compiler "$target_cc" $target_cflags \ - -march=armv8.5-a+memtag -o $TMPE $TMPC; then - echo "CROSS_CC_HAS_ARMV8_MTE=y" >> "$config_target_mak" - fi - ;; - ppc*) - if do_compiler "$target_cc" $target_cflags \ - -mpower8-vector -o $TMPE $TMPC; then - echo "CROSS_CC_HAS_POWER8_VECTOR=y" >> "$config_target_mak" - fi - if do_compiler "$target_cc" $target_cflags \ - -mpower10 -o $TMPE $TMPC; then - echo "CROSS_CC_HAS_POWER10=y" >> "$config_target_mak" - fi - ;; - i386-linux-user) - if do_compiler "$target_cc" $target_cflags \ - -Werror -fno-pie -o $TMPE $TMPC; then - echo "CROSS_CC_HAS_I386_NOPIE=y" >> "$config_target_mak" - fi - ;; - esac - elif test -n "$container_image"; then - echo "build-tcg-tests-$target: docker-image-$container_image" >> $makefile - echo "BUILD_STATIC=y" >> "$config_target_mak" - write_container_target_makefile >> "$config_target_mak" - case $target in - aarch64-*) - echo "CROSS_CC_HAS_SVE=y" >> "$config_target_mak" - echo "CROSS_CC_HAS_SVE2=y" >> "$config_target_mak" - echo "CROSS_CC_HAS_ARMV8_3=y" >> "$config_target_mak" - echo "CROSS_CC_HAS_ARMV8_BTI=y" >> "$config_target_mak" - echo "CROSS_CC_HAS_ARMV8_MTE=y" >> "$config_target_mak" - ;; - ppc*) - echo "CROSS_CC_HAS_POWER8_VECTOR=y" >> "$config_target_mak" - echo "CROSS_CC_HAS_POWER10=y" >> "$config_target_mak" - ;; - i386-linux-user) - echo "CROSS_CC_HAS_I386_NOPIE=y" >> "$config_target_mak" - ;; - esac - got_cross_cc=yes - fi - if test $got_cross_cc = yes; then - mkdir -p tests/tcg/$target echo "QEMU=$PWD/$qemu" >> "$config_target_mak" - echo "run-tcg-tests-$target: $qemu\$(EXESUF)" >> $makefile + echo "run-tcg-tests-$target: $qemu\$(EXESUF)" >> Makefile.prereqs tcg_tests_targets="$tcg_tests_targets $target" fi done -echo "TCG_TESTS_TARGETS=$tcg_tests_targets" >> $makefile) +echo "TCG_TESTS_TARGETS=$tcg_tests_targets" >> config-host.mak) if test "$skip_meson" = no; then cross="config-meson.cross.new" |