diff options
Diffstat (limited to 'configure')
| -rwxr-xr-x | configure | 193 |
1 files changed, 75 insertions, 118 deletions
@@ -27,6 +27,17 @@ printf " '%s'" "$0" "$@" >> config.log echo >> config.log echo "#" >> config.log +error_exit() { + echo + echo "ERROR: $1" + while test -n "$2"; do + echo " $2" + shift + done + echo + exit 1 +} + do_cc() { # Run the compiler, capturing its output to the log. echo $cc "$@" >> config.log @@ -46,11 +57,10 @@ do_cc() { esac echo $cc -Werror "$@" >> config.log $cc -Werror "$@" >> config.log 2>&1 && return $? - echo "ERROR: configure test passed without -Werror but failed with -Werror." - echo "This is probably a bug in the configure script. The failing command" - echo "will be at the bottom of config.log." - echo "You can run configure with --disable-werror to bypass this check." - exit 1 + error_exit "configure test passed without -Werror but failed with -Werror." \ + "This is probably a bug in the configure script. The failing command" \ + "will be at the bottom of config.log." \ + "You can run configure with --disable-werror to bypass this check." } compile_object() { @@ -494,11 +504,10 @@ SunOS) LDFLAGS="-L/opt/SUNWspro/prod/lib -R/opt/SUNWspro/prod/lib $LDFLAGS" LIBS="-lsunmath $LIBS" else - echo "QEMU will not link correctly on Solaris 8/X86 or 9/x86 without" - echo "libsunmath from the Sun Studio compilers tools, due to a lack of" - echo "C99 math features in libm.so in Solaris 8/x86 and Solaris 9/x86" - echo "Studio 11 can be downloaded from www.sun.com." - exit 1 + error_exit "QEMU will not link correctly on Solaris 8/X86 or 9/x86 without" \ + "libsunmath from the Sun Studio compilers tools, due to a lack of" \ + "C99 math features in libm.so in Solaris 8/x86 and Solaris 9/x86" \ + "Studio 11 can be downloaded from www.sun.com." fi fi fi @@ -1185,8 +1194,7 @@ if test "$ARCH" = "unknown"; then echo "Unsupported CPU = $cpu, will use TCG with TCI (experimental)" ARCH=tci else - echo "Unsupported CPU = $cpu, try --enable-tcg-interpreter" - exit 1 + error_exit "Unsupported CPU = $cpu, try --enable-tcg-interpreter" fi fi @@ -1198,8 +1206,7 @@ EOF if compile_object ; then : C compiler works ok else - echo "ERROR: \"$cc\" either does not exist or does not work" - exit 1 + error_exit "\"$cc\" either does not exist or does not work" fi # Consult white-list to determine whether to enable werror @@ -1254,8 +1261,7 @@ fi if test "$static" = "yes" ; then if test "$pie" = "yes" ; then - echo "static and pie are mutually incompatible" - exit 1 + error_exit "static and pie are mutually incompatible" else pie="no" fi @@ -1294,8 +1300,7 @@ EOF fi else if test "$pie" = "yes"; then - echo "PIE not available due to missing toolchain support" - exit 1 + error_exit "PIE not available due to missing toolchain support" else echo "Disabling PIE due to missing toolchain support" pie="no" @@ -1310,40 +1315,36 @@ if test "$solaris" = "yes" ; then if has $install; then : else - echo "Solaris install program not found. Use --install=/usr/ucb/install or" - echo "install fileutils from www.blastwave.org using pkg-get -i fileutils" - echo "to get ginstall which is used by default (which lives in /opt/csw/bin)" - exit 1 + error_exit "Solaris install program not found. Use --install=/usr/ucb/install or" \ + "install fileutils from www.blastwave.org using pkg-get -i fileutils" \ + "to get ginstall which is used by default (which lives in /opt/csw/bin)" fi if test "`path_of $install`" = "/usr/sbin/install" ; then - echo "Error: Solaris /usr/sbin/install is not an appropriate install program." - echo "try ginstall from the GNU fileutils available from www.blastwave.org" - echo "using pkg-get -i fileutils, or use --install=/usr/ucb/install" - exit 1 + error_exit "Solaris /usr/sbin/install is not an appropriate install program." \ + "try ginstall from the GNU fileutils available from www.blastwave.org" \ + "using pkg-get -i fileutils, or use --install=/usr/ucb/install" fi if has ar; then : else - echo "Error: No path includes ar" if test -f /usr/ccs/bin/ar ; then - echo "Add /usr/ccs/bin to your path and rerun configure" + error_exit "No path includes ar" \ + "Add /usr/ccs/bin to your path and rerun configure" fi - exit 1 + error_exit "No path includes ar" fi fi if ! has $python; then - echo "Python not found. Use --python=/path/to/python" - exit 1 + error_exit "Python not found. Use --python=/path/to/python" fi # Note that if the Python conditional here evaluates True we will exit # with status 1 which is a shell 'false' value. if ! "$python" -c 'import sys; sys.exit(sys.version_info < (2,4) or sys.version_info >= (3,))'; then - echo "Cannot use '$python', Python 2.4 or later is required." - echo "Note that Python 3 or later is not yet supported." - echo "Use --python=/path/to/python to specify a supported Python." - exit 1 + error_exit "Cannot use '$python', Python 2.4 or later is required." \ + "Note that Python 3 or later is not yet supported." \ + "Use --python=/path/to/python to specify a supported Python." fi if test -z "${target_list+xxx}" ; then @@ -1362,11 +1363,8 @@ esac feature_not_found() { feature=$1 - echo "ERROR" - echo "ERROR: User requested feature $feature" - echo "ERROR: configure was not able to find it" - echo "ERROR" - exit 1; + error_exit "User requested feature $feature" \ + "configure was not able to find it" } if test -z "$cross_prefix" ; then @@ -1408,8 +1406,7 @@ fi # pkg-config probe if ! has "$pkg_config_exe"; then - echo "Error: pkg-config binary '$pkg_config_exe' not found" - exit 1 + error_exit "pkg-config binary '$pkg_config_exe' not found" fi ########################################## @@ -1448,11 +1445,8 @@ EOF if compile_prog "" "-lz" ; then : else - echo - echo "Error: zlib check failed" - echo "Make sure to have the zlib libs and headers installed." - echo - exit 1 + error_exit "zlib check failed" \ + "Make sure to have the zlib libs and headers installed." fi fi @@ -1629,14 +1623,12 @@ if test "$xen_pci_passthrough" != "no"; then xen_pci_passthrough=yes else if test "$xen_pci_passthrough" = "yes"; then - echo "ERROR" - echo "ERROR: User requested feature Xen PCI Passthrough" - echo "ERROR: but this feature require /sys from Linux" if test "$xen_ctrl_version" -lt 340; then - echo "ERROR: This feature does not work with Xen 3.3" + error_exit "User requested feature Xen PCI Passthrough" \ + "This feature does not work with Xen 3.3" fi - echo "ERROR" - exit 1; + error_exit "User requested feature Xen PCI Passthrough" \ + " but this feature requires /sys from Linux" fi xen_pci_passthrough=no fi @@ -2010,11 +2002,8 @@ EOF if compile_prog "$cfl" "$lib" ; then : else - echo - echo "Error: $drv check failed" - echo "Make sure to have the $drv libs and headers installed." - echo - exit 1 + error_exit "$drv check failed" \ + "Make sure to have the $drv libs and headers installed." fi } @@ -2029,11 +2018,8 @@ for drv in $audio_drv_list; do fmod) if test -z $fmod_lib || test -z $fmod_inc; then - echo - echo "Error: You must specify path to FMOD library and headers" - echo "Example: --fmod-inc=/path/include/fmod --fmod-lib=/path/lib/libfmod-3.74.so" - echo - exit 1 + error_exit "You must specify path to FMOD library and headers" \ + "Example: --fmod-inc=/path/include/fmod --fmod-lib=/path/lib/libfmod-3.74.so" fi audio_drv_probe $drv fmod.h $fmod_lib "return FSOUND_GetVersion();" "-I $fmod_inc" libs_softmmu="$fmod_lib $libs_softmmu" @@ -2076,11 +2062,8 @@ for drv in $audio_drv_list; do *) echo "$audio_possible_drivers" | grep -q "\<$drv\>" || { - echo - echo "Error: Unknown driver '$drv' selected" - echo "Possible drivers are: $audio_possible_drivers" - echo - exit 1 + error_exit "Unknown driver '$drv' selected" \ + "Possible drivers are: $audio_possible_drivers" } ;; esac @@ -2209,8 +2192,7 @@ then LIBS="$glib_libs $LIBS" libs_qga="$glib_libs $libs_qga" else - echo "glib-$glib_req_ver required to compile QEMU" - exit 1 + error_exit "glib-$glib_req_ver required to compile QEMU" fi ########################################## @@ -2227,11 +2209,10 @@ if test "$pixman" = ""; then fi if test "$pixman" = "none"; then if test "$want_tools" != "no" -o "$softmmu" != "no"; then - echo "ERROR: pixman disabled but system emulation or tools build" - echo " enabled. You can turn off pixman only if you also" - echo " disable all system emulation targets and the tools" - echo " build with '--disable-tools --disable-system'." - exit 1 + error_exit "pixman disabled but system emulation or tools build" \ + "enabled. You can turn off pixman only if you also" \ + "disable all system emulation targets and the tools" \ + "build with '--disable-tools --disable-system'." fi pixman_cflags= pixman_libs= @@ -2240,12 +2221,11 @@ elif test "$pixman" = "system"; then pixman_libs=`$pkg_config --libs pixman-1 2>/dev/null` else if test ! -d ${source_path}/pixman/pixman; then - echo "ERROR: pixman not present. Your options:" - echo " (1) Preferred: Install the pixman devel package (any recent" - echo " distro should have packages as Xorg needs pixman too)." - echo " (2) Fetch the pixman submodule, using:" - echo " git submodule update --init pixman" - exit 1 + error_exit "pixman not present. Your options:" \ + " (1) Preferred: Install the pixman devel package (any recent" \ + " distro should have packages as Xorg needs pixman too)." \ + " (2) Fetch the pixman submodule, using:" \ + " git submodule update --init pixman" fi mkdir -p pixman/pixman pixman_cflags="-I\$(SRC_PATH)/pixman/pixman -I\$(BUILD_DIR)/pixman/pixman" @@ -2304,11 +2284,8 @@ else fi if test "$mingw32" != yes -a "$pthread" = no; then - echo - echo "Error: pthread check failed" - echo "Make sure to have the pthread libs and headers installed." - echo - exit 1 + error_exit "pthread check failed" \ + "Make sure to have the pthread libs and headers installed." fi ########################################## @@ -2363,8 +2340,7 @@ fi if test "$virtio_blk_data_plane" = "yes" -a \ "$linux_aio" != "yes" ; then - echo "Error: virtio-blk-data-plane requires Linux AIO, please try --enable-linux-aio" - exit 1 + error_exit "virtio-blk-data-plane requires Linux AIO, please try --enable-linux-aio" elif test -z "$virtio_blk_data_plane" ; then virtio_blk_data_plane=$linux_aio fi @@ -2861,10 +2837,7 @@ elif compile_prog "" "-lm" ; then LIBS="-lm $LIBS" libs_qga="-lm $libs_qga" else - echo - echo "Error: libm check failed" - echo - exit 1 + error_exit "libm check failed" fi ########################################## @@ -3040,11 +3013,8 @@ fi $python "$source_path/scripts/tracetool.py" "--backend=$trace_backend" --check-backend > /dev/null 2> /dev/null if test "$?" -ne 0 ; then - echo - echo "Error: invalid trace backend" - echo "Please choose a supported trace backend." - echo - exit 1 + error_exit "invalid trace backend" \ + "Please choose a supported trace backend." fi ########################################## @@ -3059,10 +3029,7 @@ EOF LIBS="-lust -lurcu-bp $LIBS" libs_qga="-lust -lurcu-bp $libs_qga" else - echo - echo "Error: Trace backend 'ust' missing libust header files" - echo - exit 1 + error_exit "Trace backend 'ust' missing libust header files" fi fi @@ -3070,10 +3037,7 @@ fi # For 'dtrace' backend, test if 'dtrace' command is present if test "$trace_backend" = "dtrace"; then if ! has 'dtrace' ; then - echo - echo "Error: dtrace command is not found in PATH $PATH" - echo - exit 1 + error_exit "dtrace command is not found in PATH $PATH" fi trace_backend_stap="no" if has 'stap' ; then @@ -3131,10 +3095,7 @@ elif test "$coroutine" = "windows" ; then elif test "$coroutine" = "sigaltstack" ; then coroutine_backend=sigaltstack else - echo - echo "Error: unknown coroutine backend $coroutine" - echo - exit 1 + error_exit "unknown coroutine backend $coroutine" fi ########################################## @@ -3319,8 +3280,7 @@ if test "$softmmu" = yes ; then tools="$tools fsdev/virtfs-proxy-helper\$(EXESUF)" else if test "$virtfs" = yes; then - echo "VirtFS is supported only on Linux and requires libcap-devel and libattr-devel" - exit 1 + error_exit "VirtFS is supported only on Linux and requires libcap-devel and libattr-devel" fi virtfs=no fi @@ -3967,22 +3927,20 @@ case "$target" in ;; ${target_arch2}-linux-user) if test "$linux" != "yes" ; then - echo "ERROR: Target '$target' is only available on a Linux host" - exit 1 + error_exit "Target '$target' is only available on a Linux host" fi target_user_only="yes" target_linux_user="yes" ;; ${target_arch2}-bsd-user) if test "$bsd" != "yes" ; then - echo "ERROR: Target '$target' is only available on a BSD host" - exit 1 + error_exit "Target '$target' is only available on a BSD host" fi target_user_only="yes" target_bsd_user="yes" ;; *) - echo "ERROR: Target '$target' not recognised" + error_exit "Target '$target' not recognised" exit 1 ;; esac @@ -4113,8 +4071,7 @@ case "$target_arch2" in TARGET_ARCH=xtensa ;; *) - echo "Unsupported target CPU" - exit 1 + error_exit "Unsupported target CPU" ;; esac # TARGET_BASE_ARCH needs to be defined after TARGET_ARCH |