summaryrefslogtreecommitdiffstats
path: root/tests
diff options
context:
space:
mode:
Diffstat (limited to 'tests')
-rw-r--r--tests/qtest/meson.build1
-rw-r--r--tests/qtest/xlnx-can-test.c360
2 files changed, 361 insertions, 0 deletions
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index c19f1c8503..4ca83ce605 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -156,6 +156,7 @@ qtests_aarch64 = \
['arm-cpu-features',
'numa-test',
'boot-serial-test',
+ 'xlnx-can-test',
'migration-test']
qtests_s390x = \
diff --git a/tests/qtest/xlnx-can-test.c b/tests/qtest/xlnx-can-test.c
new file mode 100644
index 0000000000..3d1120005b
--- /dev/null
+++ b/tests/qtest/xlnx-can-test.c
@@ -0,0 +1,360 @@
+/*
+ * QTests for the Xilinx ZynqMP CAN controller.
+ *
+ * Copyright (c) 2020 Xilinx Inc.
+ *
+ * Written-by: Vikram Garhwal<fnu.vikram@xilinx.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu/osdep.h"
+#include "libqos/libqtest.h"
+
+/* Base address. */
+#define CAN0_BASE_ADDR 0xFF060000
+#define CAN1_BASE_ADDR 0xFF070000
+
+/* Register addresses. */
+#define R_SRR_OFFSET 0x00
+#define R_MSR_OFFSET 0x04
+#define R_SR_OFFSET 0x18
+#define R_ISR_OFFSET 0x1C
+#define R_ICR_OFFSET 0x24
+#define R_TXID_OFFSET 0x30
+#define R_TXDLC_OFFSET 0x34
+#define R_TXDATA1_OFFSET 0x38
+#define R_TXDATA2_OFFSET 0x3C
+#define R_RXID_OFFSET 0x50
+#define R_RXDLC_OFFSET 0x54
+#define R_RXDATA1_OFFSET 0x58
+#define R_RXDATA2_OFFSET 0x5C
+#define R_AFR 0x60
+#define R_AFMR1 0x64
+#define R_AFIR1 0x68
+#define R_AFMR2 0x6C
+#define R_AFIR2 0x70
+#define R_AFMR3 0x74
+#define R_AFIR3 0x78
+#define R_AFMR4 0x7C
+#define R_AFIR4 0x80
+
+/* CAN modes. */
+#define CONFIG_MODE 0x00
+#define NORMAL_MODE 0x00
+#define LOOPBACK_MODE 0x02
+#define SNOOP_MODE 0x04
+#define SLEEP_MODE 0x01
+#define ENABLE_CAN (1 << 1)
+#define STATUS_NORMAL_MODE (1 << 3)
+#define STATUS_LOOPBACK_MODE (1 << 1)
+#define STATUS_SNOOP_MODE (1 << 12)
+#define STATUS_SLEEP_MODE (1 << 2)
+#define ISR_TXOK (1 << 1)
+#define ISR_RXOK (1 << 4)
+
+static void match_rx_tx_data(const uint32_t *buf_tx, const uint32_t *buf_rx,
+ uint8_t can_timestamp)
+{
+ uint16_t size = 0;
+ uint8_t len = 4;
+
+ while (size < len) {
+ if (R_RXID_OFFSET + 4 * size == R_RXDLC_OFFSET) {
+ g_assert_cmpint(buf_rx[size], ==, buf_tx[size] + can_timestamp);
+ } else {
+ g_assert_cmpint(buf_rx[size], ==, buf_tx[size]);
+ }
+
+ size++;
+ }
+}
+
+static void read_data(QTestState *qts, uint64_t can_base_addr, uint32_t *buf_rx)
+{
+ uint32_t int_status;
+
+ /* Read the interrupt on CAN rx. */
+ int_status = qtest_readl(qts, can_base_addr + R_ISR_OFFSET) & ISR_RXOK;
+
+ g_assert_cmpint(int_status, ==, ISR_RXOK);
+
+ /* Read the RX register data for CAN. */
+ buf_rx[0] = qtest_readl(qts, can_base_addr + R_RXID_OFFSET);
+ buf_rx[1] = qtest_readl(qts, can_base_addr + R_RXDLC_OFFSET);
+ buf_rx[2] = qtest_readl(qts, can_base_addr + R_RXDATA1_OFFSET);
+ buf_rx[3] = qtest_readl(qts, can_base_addr + R_RXDATA2_OFFSET);
+
+ /* Clear the RX interrupt. */
+ qtest_writel(qts, CAN1_BASE_ADDR + R_ICR_OFFSET, ISR_RXOK);
+}
+
+static void send_data(QTestState *qts, uint64_t can_base_addr,
+ const uint32_t *buf_tx)
+{
+ uint32_t int_status;
+
+ /* Write the TX register data for CAN. */
+ qtest_writel(qts, can_base_addr + R_TXID_OFFSET, buf_tx[0]);
+ qtest_writel(qts, can_base_addr + R_TXDLC_OFFSET, buf_tx[1]);
+ qtest_writel(qts, can_base_addr + R_TXDATA1_OFFSET, buf_tx[2]);
+ qtest_writel(qts, can_base_addr + R_TXDATA2_OFFSET, buf_tx[3]);
+
+ /* Read the interrupt on CAN for tx. */
+ int_status = qtest_readl(qts, can_base_addr + R_ISR_OFFSET) & ISR_TXOK;
+
+ g_assert_cmpint(int_status, ==, ISR_TXOK);
+
+ /* Clear the interrupt for tx. */
+ qtest_writel(qts, CAN0_BASE_ADDR + R_ICR_OFFSET, ISR_TXOK);
+}
+
+/*
+ * This test will be transferring data from CAN0 and CAN1 through canbus. CAN0
+ * initiate the data transfer to can-bus, CAN1 receives the data. Test compares
+ * the data sent from CAN0 with received on CAN1.
+ */
+static void test_can_bus(void)
+{
+ const uint32_t buf_tx[4] = { 0xFF, 0x80000000, 0x12345678, 0x87654321 };
+ uint32_t buf_rx[4] = { 0x00, 0x00, 0x00, 0x00 };
+ uint32_t status = 0;
+ uint8_t can_timestamp = 1;
+
+ QTestState *qts = qtest_init("-machine xlnx-zcu102"
+ " -object can-bus,id=canbus0"
+ " -machine xlnx-zcu102.canbus0=canbus0"
+ " -machine xlnx-zcu102.canbus1=canbus0"
+ );
+
+ /* Configure the CAN0 and CAN1. */
+ qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);
+ qtest_writel(qts, CAN0_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE);
+
+ /* Check here if CAN0 and CAN1 are in normal mode. */
+ status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET);
+ g_assert_cmpint(status, ==, STATUS_NORMAL_MODE);
+
+ status = qtest_readl(qts, CAN1_BASE_ADDR + R_SR_OFFSET);
+ g_assert_cmpint(status, ==, STATUS_NORMAL_MODE);
+
+ send_data(qts, CAN0_BASE_ADDR, buf_tx);
+
+ read_data(qts, CAN1_BASE_ADDR, buf_rx);
+ match_rx_tx_data(buf_tx, buf_rx, can_timestamp);
+
+ qtest_quit(qts);
+}
+
+/*
+ * This test is performing loopback mode on CAN0 and CAN1. Data sent from TX of
+ * each CAN0 and CAN1 are compared with RX register data for respective CAN.
+ */
+static void test_can_loopback(void)
+{
+ uint32_t buf_tx[4] = { 0xFF, 0x80000000, 0x12345678, 0x87654321 };
+ uint32_t buf_rx[4] = { 0x00, 0x00, 0x00, 0x00 };
+ uint32_t status = 0;
+
+ QTestState *qts = qtest_init("-machine xlnx-zcu102"
+ " -object can-bus,id=canbus0"
+ " -machine xlnx-zcu102.canbus0=canbus0"
+ " -machine xlnx-zcu102.canbus1=canbus0"
+ );
+
+ /* Configure the CAN0 in loopback mode. */
+ qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, CONFIG_MODE);
+ qtest_writel(qts, CAN0_BASE_ADDR + R_MSR_OFFSET, LOOPBACK_MODE);
+ qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);
+
+ /* Check here if CAN0 is set in loopback mode. */
+ status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET);
+
+ g_assert_cmpint(status, ==, STATUS_LOOPBACK_MODE);
+
+ send_data(qts, CAN0_BASE_ADDR, buf_tx);
+ read_data(qts, CAN0_BASE_ADDR, buf_rx);
+ match_rx_tx_data(buf_tx, buf_rx, 0);
+
+ /* Configure the CAN1 in loopback mode. */
+ qtest_writel(qts, CAN1_BASE_ADDR + R_SRR_OFFSET, CONFIG_MODE);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_MSR_OFFSET, LOOPBACK_MODE);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);
+
+ /* Check here if CAN1 is set in loopback mode. */
+ status = qtest_readl(qts, CAN1_BASE_ADDR + R_SR_OFFSET);
+
+ g_assert_cmpint(status, ==, STATUS_LOOPBACK_MODE);
+
+ send_data(qts, CAN1_BASE_ADDR, buf_tx);
+ read_data(qts, CAN1_BASE_ADDR, buf_rx);
+ match_rx_tx_data(buf_tx, buf_rx, 0);
+
+ qtest_quit(qts);
+}
+
+/*
+ * Enable filters for CAN1. This will filter incoming messages with ID. In this
+ * test message will pass through filter 2.
+ */
+static void test_can_filter(void)
+{
+ uint32_t buf_tx[4] = { 0x14, 0x80000000, 0x12345678, 0x87654321 };
+ uint32_t buf_rx[4] = { 0x00, 0x00, 0x00, 0x00 };
+ uint32_t status = 0;
+ uint8_t can_timestamp = 1;
+
+ QTestState *qts = qtest_init("-machine xlnx-zcu102"
+ " -object can-bus,id=canbus0"
+ " -machine xlnx-zcu102.canbus0=canbus0"
+ " -machine xlnx-zcu102.canbus1=canbus0"
+ );
+
+ /* Configure the CAN0 and CAN1. */
+ qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);
+ qtest_writel(qts, CAN0_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE);
+
+ /* Check here if CAN0 and CAN1 are in normal mode. */
+ status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET);
+ g_assert_cmpint(status, ==, STATUS_NORMAL_MODE);
+
+ status = qtest_readl(qts, CAN1_BASE_ADDR + R_SR_OFFSET);
+ g_assert_cmpint(status, ==, STATUS_NORMAL_MODE);
+
+ /* Set filter for CAN1 for incoming messages. */
+ qtest_writel(qts, CAN1_BASE_ADDR + R_AFR, 0x0);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_AFMR1, 0xF7);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_AFIR1, 0x121F);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_AFMR2, 0x5431);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_AFIR2, 0x14);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_AFMR3, 0x1234);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_AFIR3, 0x5431);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_AFMR4, 0xFFF);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_AFIR4, 0x1234);
+
+ qtest_writel(qts, CAN1_BASE_ADDR + R_AFR, 0xF);
+
+ send_data(qts, CAN0_BASE_ADDR, buf_tx);
+
+ read_data(qts, CAN1_BASE_ADDR, buf_rx);
+ match_rx_tx_data(buf_tx, buf_rx, can_timestamp);
+
+ qtest_quit(qts);
+}
+
+/* Testing sleep mode on CAN0 while CAN1 is in normal mode. */
+static void test_can_sleepmode(void)
+{
+ uint32_t buf_tx[4] = { 0x14, 0x80000000, 0x12345678, 0x87654321 };
+ uint32_t buf_rx[4] = { 0x00, 0x00, 0x00, 0x00 };
+ uint32_t status = 0;
+ uint8_t can_timestamp = 1;
+
+ QTestState *qts = qtest_init("-machine xlnx-zcu102"
+ " -object can-bus,id=canbus0"
+ " -machine xlnx-zcu102.canbus0=canbus0"
+ " -machine xlnx-zcu102.canbus1=canbus0"
+ );
+
+ /* Configure the CAN0. */
+ qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, CONFIG_MODE);
+ qtest_writel(qts, CAN0_BASE_ADDR + R_MSR_OFFSET, SLEEP_MODE);
+ qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);
+
+ qtest_writel(qts, CAN1_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE);
+
+ /* Check here if CAN0 is in SLEEP mode and CAN1 in normal mode. */
+ status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET);
+ g_assert_cmpint(status, ==, STATUS_SLEEP_MODE);
+
+ status = qtest_readl(qts, CAN1_BASE_ADDR + R_SR_OFFSET);
+ g_assert_cmpint(status, ==, STATUS_NORMAL_MODE);
+
+ send_data(qts, CAN1_BASE_ADDR, buf_tx);
+
+ /*
+ * Once CAN1 sends data on can-bus. CAN0 should exit sleep mode.
+ * Check the CAN0 status now. It should exit the sleep mode and receive the
+ * incoming data.
+ */
+ status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET);
+ g_assert_cmpint(status, ==, STATUS_NORMAL_MODE);
+
+ read_data(qts, CAN0_BASE_ADDR, buf_rx);
+
+ match_rx_tx_data(buf_tx, buf_rx, can_timestamp);
+
+ qtest_quit(qts);
+}
+
+/* Testing Snoop mode on CAN0 while CAN1 is in normal mode. */
+static void test_can_snoopmode(void)
+{
+ uint32_t buf_tx[4] = { 0x14, 0x80000000, 0x12345678, 0x87654321 };
+ uint32_t buf_rx[4] = { 0x00, 0x00, 0x00, 0x00 };
+ uint32_t status = 0;
+ uint8_t can_timestamp = 1;
+
+ QTestState *qts = qtest_init("-machine xlnx-zcu102"
+ " -object can-bus,id=canbus0"
+ " -machine xlnx-zcu102.canbus0=canbus0"
+ " -machine xlnx-zcu102.canbus1=canbus0"
+ );
+
+ /* Configure the CAN0. */
+ qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, CONFIG_MODE);
+ qtest_writel(qts, CAN0_BASE_ADDR + R_MSR_OFFSET, SNOOP_MODE);
+ qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);
+
+ qtest_writel(qts, CAN1_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE);
+
+ /* Check here if CAN0 is in SNOOP mode and CAN1 in normal mode. */
+ status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET);
+ g_assert_cmpint(status, ==, STATUS_SNOOP_MODE);
+
+ status = qtest_readl(qts, CAN1_BASE_ADDR + R_SR_OFFSET);
+ g_assert_cmpint(status, ==, STATUS_NORMAL_MODE);
+
+ send_data(qts, CAN1_BASE_ADDR, buf_tx);
+
+ read_data(qts, CAN0_BASE_ADDR, buf_rx);
+
+ match_rx_tx_data(buf_tx, buf_rx, can_timestamp);
+
+ qtest_quit(qts);
+}
+
+int main(int argc, char **argv)
+{
+ g_test_init(&argc, &argv, NULL);
+
+ qtest_add_func("/net/can/can_bus", test_can_bus);
+ qtest_add_func("/net/can/can_loopback", test_can_loopback);
+ qtest_add_func("/net/can/can_filter", test_can_filter);
+ qtest_add_func("/net/can/can_test_snoopmode", test_can_snoopmode);
+ qtest_add_func("/net/can/can_test_sleepmode", test_can_sleepmode);
+
+ return g_test_run();
+}
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-12-18 13:02:45 +0100