summaryrefslogtreecommitdiffstats
path: root/.travis.yml
Commit message (Collapse)AuthorAgeFilesLines
...
* travis.yml: Detach build and test stepsWainer dos Santos Moschetta2020-01-091-1/+2
| | | | | | | | | | | | | | | | | | | | | Currently build and test commands are a single step in a Travis's `script` block. In order to see the output of the tests one needs to scroll down the log to find where the build messages ended and the limit is not clear. If they were in different steps then Travis would print the result build command, which can be easily grep'ed. So this change is made to detach those commands to ease the visualization of the output. Note that all steps on the `script` block is executed regardless if one previous has failed. To overcome it, let's save the return code of the build then check whether succeed or failed on the test step. Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20191230184327.2800-3-wainersm@redhat.com>
* travis.yml: avocado: Print logs of non-pass tests onlyWainer dos Santos Moschetta2020-01-091-2/+2
| | | | | | | | | | | | | | The acceptance tests build on Travis is configured to print the entire Avocado's job log in case any test fail. Usually one is interested on failed tests only though. So this change the Travis configuration in order to show the log of tests which status is different from 'PASS' and 'SKIP' only. Note that 'CANCEL'-ed tests will have the log printed too because it can help to debug some condition on CI environment which is not being fulfilled. Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20191230184327.2800-2-wainersm@redhat.com>
* travis: Replace Python 3.4 build with 3.5Eduardo Habkost2019-12-201-1/+1
| | | | | | We'll start requiring Python 3.5 to build QEMU. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* travis.yml: Remove the redundant clang-with-MAIN_SOFTMMU_TARGETS entryThomas Huth2019-12-191-6/+0Star
| | | | | | | | | | | | | We test clang with the MAIN_SOFTMMU_TARGETS twice, once without sanitizers and once with sanitizers enabled. That's somewhat redundant since if compilation and tests succeeded with sanitizers enabled, it should also work fine without sanitizers. Thus remove the clang entry without sanitizers to speed up the CI testing a little bit. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20191119092147.4260-1-thuth@redhat.com>
* ci: build out-of-treePaolo Bonzini2019-12-181-5/+8
| | | | | | | | | | | | | | Most developers are using out-of-tree builds and it was discussed in the past to only allow those. To prepare for the transition, use out-of-tree builds in all continuous integration jobs. Based on a patch by Marc-André Lureau. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Li-Wen Hsu <lwhsu@freebsd.org> Message-Id: <1576074829-56711-1-git-send-email-pbonzini@redhat.com>
* travis.yml: Enable builds on arm64, ppc64le and s390xThomas Huth2019-12-181-0/+86
| | | | | | | | | | | | | | | | | | | | Travis recently added the possibility to test on these architectures, too, so let's enable them in our travis.yml file to extend our test coverage. Unfortunately, the libssh in this Ubuntu version (bionic) is in a pretty unusable Frankenstein state and libspice-server-dev is not available here, so we can not use the global list of packages to install, but have to provide individual package lists instead. Also, some of the iotests crash when using "dist: bionic" on arm64 and ppc64le, thus these two builders have to use "dist: xenial" until the problem is understood / fixed. Signed-off-by: Thomas Huth <thuth@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20191204154618.23560-8-thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
* travis.yml: Run tcg tests with tciThomas Huth2019-12-181-3/+4
| | | | | | | | | | | | | | | | | | | So far we only have compile coverage for tci. But since commit 2f160e0f9797c7522bfd0d09218d0c9340a5137c ("tci: Add implementation for INDEX_op_ld16u_i64") has been included now, we can also run the "tcg" and "qtest" tests with tci, so let's enable them in Travis now. Since we don't gain much additional test coverage by compiling all targets, and TCI is broken e.g. with the Sparc targets, we also limit the target list to a reasonable subset now (which should still get us test coverage by tests/boot-serial-test for example). Tested-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20191204083133.6198-1-thuth@redhat.com> [AJB: just --enable-debug-tcg] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
* travis.yml: Drop libcap-devGreg Kurz2019-12-091-1/+0Star
| | | | | | | | | | Commit 7e46261368d1 converted virtfs-proxy-helper to using libcap-ng. There aren't any users of libcap anymore. No need to install libcap-dev. Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Alex Bennée <alex.bennee@linaro.org>
* .travis.yml: drop xcode9.4 from build matrixAlex Bennée2019-11-291-7/+1Star
| | | | | | | | | | It's broken so it's no longer helping. The latest Xcode is covered by Cirrus. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20191127132430.3681-1-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* .travis.yml: drop 32 bit systems from MAIN_SOFTMMU_TARGETSAlex Bennée2019-11-201-1/+1
| | | | | | | | | | The older clangs are still struggling to build and run everything withing the 50 minute timeout so lets lighten the load a bit more. We still have coverage for GCC and hopefully no obscure 32 bit guest only breakages slip through the cracks. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
* .travis.yml: don't run make check with multiple jobsAlex Bennée2019-11-121-1/+1
| | | | | | | | Let's challenge the convention that doing more at a time helps. It certainly doesn't tell you unambiguously where in the test cycle you were before the test hangs and exceeds the job time limit. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
* Merge remote-tracking branch ↵Peter Maydell2019-10-301-3/+18
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/stsquad/tags/pull-tcg-plugins-281019-4' into staging TCG Plugins initial implementation - use --enable-plugins @ configure - low impact introspection (-plugin empty.so to measure overhead) - plugins cannot alter guest state - example plugins included in source tree (tests/plugins) - -d plugin to enable plugin output in logs - check-tcg runs extra tests when plugins enabled - documentation in docs/devel/plugins.rst # gpg: Signature made Mon 28 Oct 2019 15:13:23 GMT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-tcg-plugins-281019-4: (57 commits) travis.yml: enable linux-gcc-debug-tcg cache MAINTAINERS: add me for the TCG plugins code scripts/checkpatch.pl: don't complain about (foo, /* empty */) .travis.yml: add --enable-plugins tests include/exec: wrap cpu_ldst.h in CONFIG_TCG accel/stubs: reduce headers from tcg-stub tests/plugin: add hotpages to analyse memory access patterns tests/plugin: add instruction execution breakdown tests/plugin: add a hotblocks plugin tests/tcg: enable plugin testing tests/tcg: drop test-i386-fprem from TESTS when not SLOW tests/tcg: move "virtual" tests to EXTRA_TESTS tests/tcg: set QEMU_OPTS for all cris runs tests/tcg/Makefile.target: fix path to config-host.mak tests/plugin: add sample plugins linux-user: support -plugin option vl: support -plugin option plugin: add qemu_plugin_outs helper plugin: add qemu_plugin_insn_disas helper plugin: expand the plugin_init function to include an info block ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * travis.yml: enable linux-gcc-debug-tcg cacheAlex Bennée2019-10-281-7/+7
| | | | | | | | | | | | | | | | | | | | Create a new cache for the --enable-debug-tcg builds which is separate from the normal debug builds which generate different code. We also enable debug-tcg for the new plugins based builds as we want to ensure any breakage to TCG is picked up by the sanity checks. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
| * .travis.yml: add --enable-plugins testsAlex Bennée2019-10-281-0/+15
| | | | | | | | | | | | | | | | | | | | check-tcg will automatically run the plugins against most TCG tests if it is enabled in the build. We exclude sparc64-linux-user for now as there are pending patches that need to be merged fixing it's fork implementation. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
* | .travis.yml: Let the avocado job run the 40p testsPhilippe Mathieu-Daudé2019-10-291-1/+1
| | | | | | | | | | | | | | | | | | Acked-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20191028073441.6448-18-philmd@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Signed-off-by: Cleber Rosa <crosa@redhat.com>
* | .travis.yml: Let the avocado job run the Leon3 testPhilippe Mathieu-Daudé2019-10-291-1/+1
|/ | | | | | | | Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20191028073441.6448-13-philmd@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Signed-off-by: Cleber Rosa <crosa@redhat.com>
* travis.yml: --enable-debug-tcg to check-tcgAlex Bennée2019-10-251-2/+2
| | | | | | | | This adds a whole bunch of asserts which will catch bugs you might introduce into the TCG code. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* travis.yml: cache the clang sanitizer buildAlex Bennée2019-10-251-0/+1
| | | | | | | Hopefully we'll see the same benefits as the other builds. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* travis.yml: bump Xcode 10 to latest dot releaseAlex Bennée2019-10-251-1/+1
| | | | | | | | | | | | | According to: https://docs.travis-ci.com/user/reference/osx/#macos-version we have 10.3 available so lets use it. I don't know what Apple's deprecation policy is for Xcode because it requires an AppleID to find out. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* travis.yml: Test the release tarballPhilippe Mathieu-Daudé2019-10-251-0/+23
| | | | | | | | | | | | | | | Add a job to generate the release tarball and build/install few QEMU targets from it. Ideally we should build the 'efi' target from the 'roms' directory, but it is too time consuming. This job is only triggered when a tag starting with 'v' is pushed, which is the case with release candidate tags. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191007160450.3619-1-philmd@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
* travis.yml: Fix the ccache linesThomas Huth2019-10-251-2/+2
| | | | | | | | | | | | | The "command -v ccache && ccache ..." likely were supposed to test the availability of ccache before running the program. But this shell construct causes Travis to abort if ccache is not available. Use an if-statement instead to fix this problem. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191009170701.14756-5-thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
* travis.yml: Use newer version of libgnutls and libpngThomas Huth2019-10-251-2/+2
| | | | | | | | | | | | libgnutls-dev and libpng12-dev are not available in newer versions of Ubuntu anymore, so installing these packages fails e.g. in the new arm64 containers on Travis. Let's use newer versions of these packages by default instead. (The old versions still get tested in the "gcc-9" build). Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20191009170701.14756-4-thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
* travis.yml: Use libsdl2 instead of libsdl1.2, and install libsdl2-imageThomas Huth2019-10-251-2/+4
| | | | | | | | | | | We've removed support for SDL 1.2 quite a while ago already, so let's use SDL 2 now in Travis to get test coverage for SDL again. And while we're at it, also add libsdl2-image-dev which can be used by QEMU nowadays, too. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20191009170701.14756-3-thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
* travis.yml: Add libvdeplug-dev to compile-test net/vde.cThomas Huth2019-10-251-0/+1
| | | | | | | | | This library is needed to compile the VDE network backend. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20191009170701.14756-2-thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* travis.yml: reduce scope of the --enable-debug buildAlex Bennée2019-10-251-2/+3
| | | | | | | | Adding debug makes things run a bit slower so lets not hammer all the targets. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* travis.yml: Install libcap-dev for testing virito-9pThomas Huth2019-09-101-0/+1
| | | | | | | | | | | | So far we were not testing virtio-9p in Travis yet, since we forgot to install libcap-devel. Do it now to get some more test coverage. Signed-off-by: Thomas Huth <thuth@redhat.com> Acked-by: Greg Kurz <groug@kaod.org> Tested-by: Greg Kurz <groug@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190905113346.2473-1-thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
* .travis.yml: Cache Linux/Clang jobs togetherPhilippe Mathieu-Daudé2019-09-101-0/+3
| | | | | | | | These jobs build different components but use the same host features. Put them in the same cache bucket. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
* .travis.yml: Cache Linux/GCC 'non-debug profile' jobs togetherPhilippe Mathieu-Daudé2019-09-101-0/+13
| | | | | | | | These jobs build different components but use the same host features. Put them in the same cache bucket. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
* .travis.yml: Cache Linux/GCC 'debug profile' jobs togetherPhilippe Mathieu-Daudé2019-09-101-0/+2
| | | | | | | | These jobs build different components but use the same host features. Put them in the same cache bucket. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
* .travis.yml: Document how the build matrix use cachesPhilippe Mathieu-Daudé2019-09-101-0/+6
| | | | | | | | | | | We will set the CACHE_NAME variable to improve the caching of various jobs using the same characteristics. Document it first. See https://docs.travis-ci.com/user/caching/#caches-and-build-matrices Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
* .travis.yml: Enable ccache on OSXPhilippe Mathieu-Daudé2019-09-101-0/+2
| | | | | | | | | By default, ccache is not installed on macOS environments. See https://docs.travis-ci.com/user/caching/#ccache-on-macos Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
* .travis.yml: Improve ccache usePhilippe Mathieu-Daudé2019-09-101-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Per https://ccache.dev/manual/latest.html: By default, ccache tries to give as few false cache hits as possible. However, in certain situations it’s possible that you know things that ccache can’t take for granted. [The CCACHE_SLOPINESS environment variable] makes it possible to tell ccache to relax some checks in order to increase the hit rate. We can relax the ctime/mtime header checks: - include_file_ctime By default, ccache also will not cache a file if it includes a header whose ctime is too new. This option disables that check. - include_file_mtime By default, ccache will not cache a file if it includes a header whose mtime is too new. This option disables that check. We also add a call to clear the cache statistics before running the build, and display them when the build finishes. See https://docs.travis-ci.com/user/caching/#ccache-cache Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
* .travis.yml: Cache Avocado cachePhilippe Mathieu-Daudé2019-09-101-0/+2
| | | | | | | | | | | Avocado tests download artifacts from various sources. These sources sometime have network issues resulting in build failures. Cache Avocado cache to reduce build failure. See https://docs.travis-ci.com/user/caching/#arbitrary-directories Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
* .travis.yml: Cache Python PIP packagesPhilippe Mathieu-Daudé2019-09-101-0/+1
| | | | | | | | | We always install the same packages ever and ever, cache them. See https://docs.travis-ci.com/user/caching/#pip-cache Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
* .travis.yml: Increase cache timeout from 3min to 20minPhilippe Mathieu-Daudé2019-09-101-0/+1
| | | | | | | | | | We are going to cache few gigabytes, increase the cache timeout to avoid build failures when uploading our cache. See https://docs.travis-ci.com/user/caching/#setting-the-timeout Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
* .travis.yml: Enable multiple caching featuresPhilippe Mathieu-Daudé2019-09-101-1/+2
| | | | | | | | | | | | Using the 'multiple caching features' means explode the YAML array, thus it eases the git workflow (it is easier to move patches around). See https://docs.travis-ci.com/user/caching#enabling-multiple-caching-features Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20170809202712.6951-4-f4bug@amsat.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
* .travis.yml: Let the avocado job run the NeXTcube testsPhilippe Mathieu-Daudé2019-09-071-1/+6
| | | | | | | Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20190813134921.30602-3-philmd@redhat.com> [huth: Rebased patch to master branch] Signed-off-by: Thomas Huth <huth@tuxfamily.org>
* Boot Linux Console Test: add a test for ppc64 + pseriesCleber Rosa2019-08-291-1/+1
| | | | | | | | | | | Just like the previous tests, boots a Linux kernel on a ppc64 target using the pseries machine. Signed-off-by: Cleber Rosa <crosa@redhat.com> CC: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-Id: <20190607152223.9467-5-crosa@redhat.com> Signed-off-by: Cleber Rosa <crosa@redhat.com>
* travis: enable travis_retry for check phaseAlex Bennée2019-07-231-1/+1
| | | | | | | | | We have some flaky tests and usually the test passes on a retry. Enable travis_retry for the test phase and see if that helps keep things green. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* .travis.yml: force a brew update for MacOS buildsAlex Bennée2019-07-041-0/+1
| | | | | | | | | | | It looks like the Travis image package databases are out of date causing the build to error with: Error: Your Homebrew is outdated. Please run `brew update`. Error: Kernel.exit Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* .travis.yml: default the --disable-system build to --staticAlex Bennée2019-07-041-1/+1
| | | | | | | | | | | | It's fairly common to build qemu-user binaries with --static linking so the binary can be copied around without libraries. Enable --static in the default qemu-user build to cover this. There are other qemu-user builds that use dynamic linking so they should catch any problems there. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* ssh: switch from libssh2 to libsshPino Toscano2019-06-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Rewrite the implementation of the ssh block driver to use libssh instead of libssh2. The libssh library has various advantages over libssh2: - easier API for authentication (for example for using ssh-agent) - easier API for known_hosts handling - supports newer types of keys in known_hosts Use APIs/features available in libssh 0.8 conditionally, to support older versions (which are not recommended though). Adjust the iotest 207 according to the different error message, and to find the default key type for localhost (to properly compare the fingerprint with). Contributed-by: Max Reitz <mreitz@redhat.com> Adjust the various Docker/Travis scripts to use libssh when available instead of libssh2. The mingw/mxe testing is dropped for now, as there are no packages for it. Signed-off-by: Pino Toscano <ptoscano@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20190620200840.17655-1-ptoscano@redhat.com Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 5873173.t2JhDm7DL7@lindworm.usersys.redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
* Travis: print acceptance tests logs in case of job failureCleber Rosa2019-06-181-0/+2
| | | | | | | | | | | | | | | | Because Travis doesn't allow us to keep files produced during tests (such as log files), let's print the complete job log to the "console" in case of job failures. This is a debugging aid, and given that there's been some timeouts happening on some tests, we absolutely needs the logs to have a proper action. Signed-off-by: Cleber Rosa <crosa@redhat.com> Message-Id: <20190607152223.9467-2-crosa@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Acked-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* Revert "travis: Make check-acceptance job more verbose"Eduardo Habkost2019-06-181-1/+1
| | | | | | | | | This reverts commit 6d7a134da4afebe8551a69329478415cfb4cbe91. We'll have a better fix, that will show the full avocado job log only if a test case failed. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* .travis.yml: add clang ubsan jobAlex Bennée2019-06-121-0/+7
| | | | | | | | | | | We document this on our wiki and we might as well catch it in our CI rather than waiting for it to be picked up on merge: https://wiki.qemu.org/Testing#clang_UBSan Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* .travis.yml: bump gcc sanitiser job to gcc-9Alex Bennée2019-06-121-5/+5
| | | | | | | | | | | | The toolchain PPA has it so we might as well use it. We currently have to add: -Wno-error=stringop-truncation as there are still strncpy operations in the tree operating on things that haven't been annotated with QEMU_NONSTRING. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
* travis: Make check-acceptance job more verboseEduardo Habkost2019-06-111-1/+1
| | | | | | It will help us debug issues when tests fail. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* .travis.yml: enable aarch64-softmmu and alpha-softmmu tcg testsAlex Bennée2019-05-281-1/+1
| | | | | Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
* cirrus / travis: Add gnu-sed and bash for macOS and FreeBSDThomas Huth2019-05-211-0/+1
| | | | | | | | | | | | We are going to enable the qemu-iotests during "make check" again, and for running the iotests, we need bash and gnu-sed. Reviewed-by: Li-Wen Hsu <lwhsu@freebsd.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20190502084506.8009-5-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
* tests/boot_linux_console: add a test for alpha + clipperCleber Rosa2019-05-031-1/+1
| | | | | | | | | | | | | | | | | | | | | Similar to the x86_64 + pc test, it boots a Linux kernel on a Malta board and verify the serial is working. One extra command added to the QEMU command line is '-vga std', because the kernel used is known to crash without it. If alpha is a target being built, "make check-acceptance" will automatically include this test by the use of the "arch:alpha" tags. Alternatively, this test can be run using: $ avocado run -t arch:alpha tests/acceptance $ avocado run -t machine:clipper tests/acceptance Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Cleber Rosa <crosa@redhat.com> Reviewed-by: Caio Carrara <ccarrara@redhat.com> Message-Id: <20190312171824.5134-21-crosa@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-12-22 11:38:56 +0100