summaryrefslogtreecommitdiffstats
path: root/block/qcow2-cache.c
Commit message (Collapse)AuthorAgeFilesLines
* qcow2: Remove stale commentAlberto Garcia2016-11-251-1/+0Star
| | | | | | | We haven't been using CONFIG_MADVISE since 02d0e095031b7fda77de8b Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qcow2: Make qcow2_cache_table_release() work only in LinuxAlberto Garcia2016-11-251-2/+3
| | | | | | | | | | | | | | We are using QEMU_MADV_DONTNEED to discard the memory of individual L2 cache tables. The problem with this is that those semantics are specific to the Linux madvise() system call. Other implementations of madvise() (including the very Linux implementation of posix_madvise()) don't do that, so we cannot use them for the same purpose. This patch makes the code Linux-specific and uses madvise() directly since there's no point in going through qemu_madvise() for this. Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block: Convert bdrv_pwrite(v/_sync) to BdrvChildKevin Wolf2016-07-051-1/+1
| | | | | | Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
* block: Convert bdrv_pread(v) to BdrvChildKevin Wolf2016-07-051-1/+1
| | | | | | Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
* os-posix: include sys/mman.hPaolo Bonzini2016-06-161-5/+0Star
| | | | | | | | | qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check is bogus without a previous inclusion of sys/mman.h. Include it in sysemu/os-posix.h and remove it from everywhere else. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qcow2: avoid extra flushes in qcow2Denis V. Lunev2016-06-081-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The problem with excessive flushing was found by a couple of performance tests: - parallel directory tree creation (from 2 processes) - 32 cached writes + fsync at the end in a loop For the first one results improved from 2.6 loops/sec to 3.5 loops/sec. Each loop creates 10^3 directories with 10 files in each. For the second one results improved from ~600 fsync/sec to ~1100 fsync/sec. Though, it was run on SSD so it probably won't show such performance gain on rotational media. qcow2_cache_flush() calls bdrv_flush() unconditionally after writing cache entries of a particular cache. This can lead to as many as 2 additional fdatasyncs inside bdrv_flush. We can simply skip all fdatasync calls inside qcow2_co_flush_to_os as bdrv_flush for sure will do the job. These flushes are necessary to keep the right order of writes to the different caches. Though this is not necessary in the current code base as this ordering is ensured through the flush in qcow2_cache_flush_dependency(). Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Pavel Borzenkov <pborzenkov@virtuozzo.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block: Clean up includesPeter Maydell2016-01-201-2/+1Star
| | | | | | | | | | | Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block: Convert bs->file to BdrvChildKevin Wolf2015-10-161-5/+6
| | | | | | | | | | | This patch removes the temporary duplication between bs->file and bs->file_child by converting everything to BdrvChild. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
* qcow2: Rename BDRVQcowState to BDRVQcow2StateKevin Wolf2015-09-141-7/+7
| | | | | | | | | | BDRVQcowState is already used by qcow1, and gdb is always confused which one to use. Rename the qcow2 one so they can be distinguished. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com>
* qcow2: reorder fields in Qcow2CachedTable to reduce paddingAlberto Garcia2015-09-041-1/+1
| | | | | | | | | | | Changing the current ordering saves 8 bytes per cache entry in x86_64. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 0bd55291211df3dfb514d0e7d2031dd5c4f9f807.1438690126.git.berto@igalia.com Signed-off-by: Max Reitz <mreitz@redhat.com>
* qcow2: add option to clean unused cache entries after some timeAlberto Garcia2015-09-041-0/+35
| | | | | | | | | | | | | | | | | | This adds a new 'cache-clean-interval' option that cleans all qcow2 cache entries that haven't been used in a certain interval, given in seconds. This allows setting a large L2 cache size so it can handle scenarios with lots of I/O and at the same time use little memory during periods of inactivity. This feature currently relies on MADV_DONTNEED to free that memory, so it is not useful in systems that don't follow that behavior. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: a70d12da60433df9360ada648b3f34b8f6f354ce.1438690126.git.berto@igalia.com Signed-off-by: Max Reitz <mreitz@redhat.com>
* qcow2: mark the memory as no longer needed after qcow2_cache_empty()Alberto Garcia2015-09-041-0/+26
| | | | | | | | | | | | | | | | After having emptied the cache, the data in the cache tables is no longer useful, so we can tell the kernel that we are done with it. In Linux this frees the resources associated with it. The effect of this can be seen in the HMP commit operation: it moves data from the top to the base image (and fills both caches), then it empties the top image. At this point the data in that cache is no longer needed so it's just wasting memory. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 08538b098e1faf6c92496477cf9b47a20e5aacea.1438690126.git.berto@igalia.com Signed-off-by: Max Reitz <mreitz@redhat.com>
* qcow2: remove unnecessary checkAlberto Garcia2015-07-071-3/+0Star
| | | | | | | | The value of 'i' is guaranteed to be >= 0 Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: 1435824371-2660-1-git-send-email-berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* qcow2: style fixes in qcow2-cache.cAlberto Garcia2015-05-221-3/+3
| | | | | | | | | | Fix pointer declaration to make it consistent with the rest of the code. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qcow2: make qcow2_cache_put() a void functionAlberto Garcia2015-05-221-6/+1Star
| | | | | | | | | | This function never receives an invalid table pointer, so we can make it void and remove all the error checking code. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qcow2: use a hash to look for entries in the L2 cacheAlberto Garcia2015-05-221-2/+7
| | | | | | | | | | | | | | | | | | | The current cache algorithm traverses the array starting always from the beginning, so the average number of comparisons needed to perform a lookup is proportional to the size of the array. By using a hash of the offset as the starting point, lookups are faster and independent from the array size. The hash is computed using the cluster number of the table, multiplied by 4 to make it perform better when there are collisions. In my tests, using a cache with 2048 entries, this reduces the average number of comparisons per lookup from 430 to 2.5. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qcow2: remove qcow2_cache_find_entry_to_replace()Alberto Garcia2015-05-221-29/+16Star
| | | | | | | | | | | A cache miss means that the whole array was traversed and the entry we were looking for was not found, so there's no need to traverse it again in order to select an entry to replace. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qcow2: use an LRU algorithm to replace entries from the L2 cacheAlberto Garcia2015-05-221-18/+15Star
| | | | | | | | | | | | | | | | | | | The current algorithm to evict entries from the cache gives always preference to those in the lowest positions. As the size of the cache increases, the chances of the later elements of being removed decrease exponentially. In a scenario with random I/O and lots of cache misses, entries in positions 8 and higher are rarely (if ever) evicted. This can be seen even with the default cache size, but with larger caches the problem becomes more obvious. Using an LRU algorithm makes the chances of being removed from the cache independent from the position. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qcow2: simplify qcow2_cache_put() and qcow2_cache_entry_mark_dirty()Alberto Garcia2015-05-221-17/+15Star
| | | | | | | | | | | Since all tables are now stored together, it is possible to obtain the position of a particular table directly from its address, so the operation becomes O(1). Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qcow2: use one single memory block for the L2/refcount cache tablesAlberto Garcia2015-05-221-29/+26Star
| | | | | | | | | | | | | | | | | | The qcow2 L2/refcount cache contains one separate table for each cache entry. Doing one allocation per table adds unnecessary overhead and it also requires us to store the address of each table separately. Since the size of the cache is constant during its lifetime, it's better to have an array that contains all the tables using one single allocation. In my tests measuring freshly created caches with sizes 128MB (L2) and 32MB (refcount) this uses around 10MB of RAM less. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block: Give always priority to unused entries in the qcow2 L2 cacheAlberto Garcia2015-02-061-1/+3
| | | | | | | | | | | | | | | | | | | | | | The current algorithm to replace entries from the L2 cache gives priority to newer hits by dividing the hit count of all existing entries by two everytime there is a cache miss. However, if there are several cache misses the hit count of the existing entries can easily go down to 0. This will result in those entries being replaced even when there are others that have never been used. This problem is more noticeable with larger disk images and cache sizes, since the chances of having several misses before the cache is full are higher. If we make sure that the hit count can never go down to 0 again, unused entries will always have priority. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qcow2: Use g_try_new0() for cache arrayMax Reitz2014-08-201-4/+9
| | | | | | | | | | | With a variable cache size, the number given to qcow2_cache_create() may be huge. Therefore, use g_try_new0(). While at it, use g_new0() instead of g_malloc0() for allocating the Qcow2Cache object. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block: Use g_new() & friends to avoid multiplying sizesMarkus Armbruster2014-08-201-1/+1
| | | | | | | | | | | | | | | | | | | | g_new(T, n) is safer than g_malloc(sizeof(*v) * n) for two reasons. One, it catches multiplication overflowing size_t. Two, it returns T * rather than void *, which lets the compiler catch more type errors. Perhaps a conversion to g_malloc_n() would be neater in places, but that's merely four years old, and we can't use such newfangled stuff. This commit only touches allocations with size arguments of the form sizeof(T), plus two that use 4 instead of sizeof(uint32_t). We can make the others safe by converting to g_malloc_n() when it becomes available to us in a couple of years. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qcow2: Handle failure for potentially large allocationsKevin Wolf2014-08-151-1/+12
| | | | | | | | | | | Some code in the block layer makes potentially huge allocations. Failure is not completely unexpected there, so avoid aborting qemu and handle out-of-memory situations gracefully. This patch addresses the allocations in the qcow2 block driver. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
* qcow2: Use negated overflow check maskMax Reitz2013-10-111-5/+3Star
| | | | | | | | | | | In qcow2_check_metadata_overlap and qcow2_pre_write_overlap_check, change the parameter signifying the checks to perform from its current positive form to a negative one, i.e., it will no longer explicitly specify every check to perform but rather a mask of checks not to perform. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qcow2-cache: Empty cacheMax Reitz2013-09-121-0/+18
| | | | | | | | Add a function for emptying a cache, i.e., flushing it and marking all elements invalid. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qcow2: Employ metadata overlap checksMax Reitz2013-08-301-0/+17
| | | | | | | | The pre-write overlap check function is now called before most of the qcow2 writes (aborting it on collision or other error). Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block: move include files to include/block/Paolo Bonzini2012-12-191-1/+1
| | | | Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qcow2: always operate caches in writeback modePaolo Bonzini2012-06-151-23/+2Star
| | | | | | | | | Writethrough does not need special-casing anymore in the qcow2 caches. The block layer adds flushes after every guest-initiated data write, and these will also flush the qcow2 caches to the OS. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qcow2: Add some tracingKevin Wolf2012-03-121-0/+18
| | | | | Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* Use glib memory allocation and free functionsAnthony Liguori2011-08-211-4/+4
| | | | | | qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* qcow2: Use Qcow2Cache in writeback mode during loadvm/savevmKevin Wolf2011-07-191-0/+12
| | | | | | | | | In snapshotting there is no guest involved, so we can safely use a writeback mode and do the flushes in the right place (i.e. at the very end). This improves the time that creating/restoring an internal snapshot takes with an image in writethrough mode. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* Reorganize struct Qcow2Cache for better struct packingJes Sorensen2011-01-311-1/+1
| | | | | | | | Move size after the two pointers in struct Qcow2Cache to get better packing of struct elements on 64 bit architectures. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qcow2: Batch flushes for COWKevin Wolf2011-01-241-3/+17
| | | | | | | | | qcow2 calls bdrv_flush() after performing COW in order to ensure that the L2 table change is never written before the copy is safe on disk. Now that the L2 table is cached, we can wait with flushing until we write out the next L2 table. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qcow2: Use QcowCacheKevin Wolf2011-01-241-0/+10
| | | | | | | Use the new functions of qcow2-cache.c for everything that works on refcount block and L2 tables. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qcow2: Add QcowCacheKevin Wolf2011-01-241-0/+290
This adds some new cache functions to qcow2 which can be used for caching refcount blocks and L2 tables. When used with cache=writethrough they work like the old caching code which is spread all over qcow2, so for this case we have merely a cleanup. The interesting case is with writeback caching (this includes cache=none) where data isn't written to disk immediately but only kept in cache initially. This leads to some form of metadata write batching which avoids the current "write to refcount block, flush, write to L2 table" pattern for each single request when a lot of cluster allocations happen. Instead, cache entries are only written out if its required to maintain the right order. In the pure cluster allocation case this means that all metadata updates for requests are done in memory initially and on sync, first the refcount blocks are written to disk, then fsync, then L2 tables. This improves performance of scenarios with lots of cluster allocations noticably (e.g. installation or after taking a snapshot). Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-12-22 13:33:18 +0100