summaryrefslogtreecommitdiffstats
path: root/block/quorum.c
Commit message (Collapse)AuthorAgeFilesLines
* quorum: Set sectors-count to 0 when reporting a flush errorAlberto Garcia2017-08-081-2/+1Star
| | | | | | | | | | | | | | | | | | | | | The QUORUM_REPORT_BAD event has fields to report the sector in which the error was detected and the number of affected sectors starting from that one. This is important for read and write errors, but not for flush errors. For flush errors the current code reports the total size of the disk image. That is however not useful information in this case. Moreover, the bdrv_getlength() call can fail, and there's no good way of handling that failure. Since we're reporting useless information and we cannot even guarantee to do it in a consistent way, this patch changes the code to report 0 instead in all cases. Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qapi: merge QInt and QFloat in QNumMarc-André Lureau2017-06-201-1/+0Star
| | | | | | | | | | | | | | | We would like to use a same QObject type to represent numbers, whether they are int, uint, or floats. Getters will allow some compatibility between the various types if the number fits other representations. Add a few more tests while at it. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170607163635.17635-7-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [parse_stats_intervals() simplified a bit, comment in test_visitor_in_int_overflow() tidied up, suppress bogus warnings] Signed-off-by: Markus Armbruster <armbru@redhat.com>
* qobject: Use simpler QDict/QList scalar insertion macrosEric Blake2017-05-091-4/+4
| | | | | | | | | | | | | | | | | | We now have macros in place to make it less verbose to add a scalar to QDict and QList, so use them. Patch created mechanically via: spatch --sp-file scripts/coccinelle/qobject.cocci \ --macro-file scripts/cocci-macro-file.h --dir . --in-place then touched up manually to fix a couple of '?:' back to original spacing, as well as avoiding a long line in monitor.c. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20170427215821.19397-7-eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
* qobject: Drop useless QObject castsEric Blake2017-05-081-10/+6Star
| | | | | | | | | | | | | | | | | | | We have macros in place to make it less verbose to add a subtype of QObject to both QDict and QList. While we have made cleanups like this in the past (see commit fcfcd8ffc, for example), having it be automated by Coccinelle makes it easier to maintain. Patch created mechanically via: spatch --sp-file scripts/coccinelle/qobject.cocci \ --macro-file scripts/cocci-macro-file.h --dir . --in-place then I verified that no manual touchups were required. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20170427215821.19397-5-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
* block: Request child permissions in filter driversKevin Wolf2017-02-281-0/+2
| | | | | | | | | | All callers will have to request permissions for all of their child nodes. Block drivers that act as simply filters can use the default implementation of .bdrv_child_perm(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Fam Zheng <famz@redhat.com>
* block: Add Error argument to bdrv_attach_child()Kevin Wolf2017-02-281-1/+8
| | | | | | | | It will have to return an error soon, so prepare the callers for it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Fam Zheng <famz@redhat.com>
* quorum: Clean up quorum_aio_get()Kevin Wolf2017-01-091-13/+10Star
| | | | | | | | | | | | Make sure that all fields of the new QuorumAIOCB are zeroed when the function returns even without explicitly setting them. This will protect us when new fields are added, removes some explicit zero assignment and makes the code a little nicer to read. Suggested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com>
* quorum: Inline quorum_fifo_aio_cb()Kevin Wolf2017-01-091-29/+13Star
| | | | | | | | | | Inlining the function removes some boilerplace code and replaces recursion by a simple loop, so the code becomes somewhat easier to understand. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Eric Blake <eblake@redhat.com>
* quorum: Implement .bdrv_co_preadv/pwritev()Kevin Wolf2017-01-091-43/+38Star
| | | | | | | | | | | | This enables byte granularity requests on quorum nodes. Note that the QMP events emitted by the driver are an external API that we were careless enough to define as sector based. The offset and length of requests reported in events are rounded therefore. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com>
* quorum: Avoid bdrv_aio_writev() for rewritesKevin Wolf2017-01-091-15/+31
| | | | | | | | | Replacing it with bdrv_co_pwritev() prepares us for byte granularity requests and gets us rid of the last bdrv_aio_*() user in quorum. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Eric Blake <eblake@redhat.com>
* quorum: Inline quorum_aio_cb()Kevin Wolf2017-01-091-69/+59Star
| | | | | | | | | This is a conversion to a more natural coroutine style and improves the readability of the driver. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Eric Blake <eblake@redhat.com>
* quorum: Do cleanup in caller coroutineKevin Wolf2017-01-091-6/+9
| | | | | | | | | | Instead of calling quorum_aio_finalize() deeply nested in what used to be an AIO callback, do it in the same functions that allocated the AIOCB. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Eric Blake <eblake@redhat.com>
* quorum: Implement .bdrv_co_readv/writevKevin Wolf2017-01-091-77/+115
| | | | | | | | | | This converts the quorum block driver from implementing callback-based interfaces for read/write to coroutine-based ones. This is the first step that will allow us further simplification of the code. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com>
* quorum: Remove s from quorum_aio_get() argumentsKevin Wolf2017-01-091-5/+4Star
| | | | | | | | | | There is no point in passing the value of bs->opaque in order to overwrite it with itself. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com>
* quorum: do not allocate multiple iovecs for FIFO strategyPaolo Bonzini2016-10-241-39/+40
| | | | | | | | | | | | | | | In FIFO mode there are no parallel reads, hence there is no need to allocate separate buffers and clone the iovecs. The two cases of quorum_aio_cb are now even more different, and most of quorum_aio_finalize is only needed in one of them, so split them in separate functions. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1475685327-22767-3-git-send-email-pbonzini@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
* quorum: change child_iter to children_readPaolo Bonzini2016-10-241-17/+13Star
| | | | | | | | | | | This simplifies a bit the code by using the usual C "inclusive start, exclusive end" pattern for ranges. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1475685327-22767-2-git-send-email-pbonzini@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
* block: Convert bdrv_aio_writev() to BdrvChildKevin Wolf2016-07-051-2/+2
| | | | | | Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
* block: Convert bdrv_aio_readv() to BdrvChildKevin Wolf2016-07-051-2/+2
| | | | | | Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
* error: Remove NULL checks on error_propagate() callsEduardo Habkost2016-06-201-3/+1Star
| | | | | | | | | | | | | | | error_propagate() already ignores local_err==NULL, so there's no need to check it before calling. Coccinelle patch used to perform the changes added to scripts/coccinelle/error_propagate_null.cocci. Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1465855078-19435-2-git-send-email-ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
* block: Propagate AioContext change to all childrenMax Reitz2016-05-191-24/+0Star
| | | | | | | | | | | | | Instead of propagating any change of a BDS's AioContext only to its file and backing children and letting driver-specific code do the rest, just propagate it to all and drop the thus superfluous implementations of bdrv_{at,de}tach_aio_context() in Quorum, blkverify and VMDK. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* quorum: implement bdrv_add_child() and bdrv_del_child()Wen Congyang2016-05-121-2/+76
| | | | | | | | | | | Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com> Message-id: 1462865799-19402-3-git-send-email-xiecl.fnst@cn.fujitsu.com Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
* block: Drop superfluous invalidating bs->file from driversFam Zheng2016-05-121-16/+0Star
| | | | | | | | | Now they are invalidated by the block layer, so it's not necessary to do this in block drivers' implementations of .bdrv_invalidate_cache. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* quorum: Emit QUORUM_REPORT_BAD for reads in fifo modeAlberto Garcia2016-03-171-8/+9
| | | | | | | | | | | If there's an I/O error in one of Quorum children then QEMU should emit QUORUM_REPORT_BAD. However this is not working with read-pattern=fifo. This patch fixes this problem. Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: d57e39e8d3e8564003a1e2aadbd29c97286eb2d2.1458034554.git.berto@igalia.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
* quorum: Fix crash in quorum_aio_cb()Alberto Garcia2016-03-141-5/+7
| | | | | | | | | | | | quorum_aio_cb() emits the QUORUM_REPORT_BAD event if there's an I/O error in a Quorum child. However sacb->aiocb must be correctly initialized for this to happen. read_quorum_children() and read_fifo_child() are not doing this, which results in a QEMU crash. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 8138570d071ba7e25db3736979234a1fd71dbd05.1457610443.git.berto@igalia.com Signed-off-by: Max Reitz <mreitz@redhat.com>
* quorum: modify vote rules for flush operationChanglong Xie2016-03-141-5/+16
| | | | | | | | | | | | | | | | | | | | Keep flush interface the same logic as quorum read/write, Otherwise in following scenario, we'll encounter unexpected errors. Quorum has two children(A, B). A do flush sucessfully, but B flush failed. This cause the filesystem of guest become read-only with following errors: end_request: I/O error, dev vda, sector 11159960 Aborting journal on device vda3-8 EXT4-fs error (device vda3): ext4_journal_start_sb:327: Detected abort journal EXT4-fs (vda3): Remounting filesystem read-only Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qmp event: Refactor QUORUM_REPORT_BADChanglong Xie2016-03-141-5/+12
| | | | | | | | | | | | Introduce QuorumOpType, and make QUORUM_REPORT_BAD compatible with it. Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* quorum: fix segfault when read fails in fifo modeChanglong Xie2016-02-221-1/+2
| | | | | | | Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block: Clean up includesPeter Maydell2016-01-201-0/+1
| | | | | | | | | | | Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block: Pass driver-specific options to .bdrv_refresh_filename()Kevin Wolf2015-12-181-1/+1
| | | | | | | | | | | | | | | | | In order to decide whether a blkdebug: filename can be produced or a json: one is necessary, blkdebug checked whether bs->options had more options than just "config", "x-image" or "image" (the latter including nested options). That doesn't work well when generic block layer options are present. This patch passes an option QDict to the driver that contains only driver-specific options, i.e. the options for the general block layer as well as child nodes are already filtered out. Works much better this way. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com>
* qapi: Don't let implicit enum MAX member collideEric Blake2015-12-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we guarantee the user doesn't have any enum values beginning with a single underscore, we can use that for our own purposes. Renaming ENUM_MAX to ENUM__MAX makes it obvious that the sentinel is generated. This patch was mostly generated by applying a temporary patch: |diff --git a/scripts/qapi.py b/scripts/qapi.py |index e6d014b..b862ec9 100644 |--- a/scripts/qapi.py |+++ b/scripts/qapi.py |@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = { | max_index = c_enum_const(name, 'MAX', prefix) | ret += mcgen(''' | [%(max_index)s] = NULL, |+// %(max_index)s | }; | ''', | max_index=max_index) then running: $ cat qapi-{types,event}.c tests/test-qapi-types.c | sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list $ git grep -l _MAX | xargs sed -i -f list The only things not generated are the changes in scripts/qapi.py. Rejecting enum members named 'MAX' is now useless, and will be dropped in the next patch. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1447836791-369-23-git-send-email-eblake@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> [Rebased to current master, commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
* quorum: Convert to BdrvChildKevin Wolf2015-10-161-31/+34
| | | | | | | | | Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
* quorum: validate vote threshold against num_children even if read-pattern is ↵Wen Congyang2015-09-041-6/+6
| | | | | | | | | | | | | | fifo We need to use threshold to check if too many write operation fails. If threshold is larger than num children, we always get write error event even if all write operations success. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Message-id: 55962F72.3060003@cn.fujitsu.com Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
* block: don't register quorum driver if SHA256 support is unavailableSascha Silbe2015-08-051-6/+4Star
| | | | | | | | | | | | | | | | | | | | | | | Commit 488981a4 [block: convert quorum blockdrv to use crypto APIs] broke qemu-iotest 041 on hosts with GnuTLS < 2.10.0. It converted a compile-time check to a run-time check at device open time. The result is that we now advertise a feature (the quorum block driver) that will never work (on those hosts). There's no way (short of parsing human-readable error messages) for qemu-iotests or any other API consumer to recognise that the quorum block driver isn't _actually_ available and shouldn't be used or tested. Move the run-time check to bdrv_quorum_init() to avoid registering the quorum block driver if we know it cannot work. This way API consumers can recognise it's unavailable. Fixes: 488981a4af396551a3178d032cc2b41d9553ada2 Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-id: 1438699705-21761-1-git-send-email-silbe@linux.vnet.ibm.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* block: convert quorum blockdrv to use crypto APIsDaniel P. Berrange2015-07-081-19/+20
| | | | | | | | | | | | Get rid of direct use of gnutls APIs in quorum blockdrv in favour of using the crypto APIs. This avoids the need to do conditional compilation of the quorum driver. It can simply report an error at file open file instead if the required hash algorithm isn't supported by QEMU. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1435770638-25715-8-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Include qapi/qmp/qerror.h exactly where neededMarkus Armbruster2015-06-221-0/+1
| | | | | | | | | In particular, don't include it into headers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
* qerror: Clean up QERR_ macros to expand into a single stringMarkus Armbruster2015-06-221-2/+2
| | | | | | | | | | | | | | | | | | | | | These macros expand into error class enumeration constant, comma, string. Unclean. Has been that way since commit 13f59ae. The error class is always ERROR_CLASS_GENERIC_ERROR since the previous commit. Clean up as follows: * Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and delete it from the QERR_ macro. No change after preprocessing. * Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into error_setg(...). Again, no change after preprocessing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
* qobject: Use 'bool' for qboolEric Blake2015-06-221-2/+2
| | | | | | | | | | | | We require a C99 compiler, so let's use 'bool' instead of 'int' when dealing with boolean values. There are few enough clients to fix them all in one pass. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Alberto Garcia <berto@igalia.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
* block: Move flag inheritance to bdrv_open_inherit()Kevin Wolf2015-06-121-2/+2
| | | | | | | | | | | Instead of letting every caller of bdrv_open() determine the right flags for its child node manually and pass them to the function, pass the parent node and the role of the newly opened child (like backing file, protocol layer, etc.). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
* quorum: Use bdrv_open_image()Kevin Wolf2015-06-121-40/+11Star
| | | | | | | | | | | | Besides standardising on a single interface for opening child nodes, this simplifies the .bdrv_open() implementation of the quorum block driver by using block layer functionality for handling BlockdevRefs. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com>
* block: add bdrv_get_device_or_node_name()Alberto Garcia2015-04-281-4/+1Star
| | | | | | | | | | | | This function gets the device name associated with a BlockDriverState, or its node name if the device name is empty. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 4fa30aa8d61d9052ce266fd5429a59a14e941255.1428485266.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block: Rename BlockDriverCompletionFunc to BlockCompletionFuncMarkus Armbruster2014-10-201-3/+3
| | | | | | | | | | I'll use it with block backends shortly, and the name is going to fit badly there. It's a block layer thing anyway, not just a block driver thing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block: Rename BlockDriverAIOCB* to BlockAIOCB*Markus Armbruster2014-10-201-18/+18
| | | | | | | | | | I'll use BlockDriverAIOCB with block backends shortly, and the name is going to fit badly there. It's a block layer thing anyway, not just a block driver thing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block: Eliminate BlockDriverState member device_name[]Markus Armbruster2014-10-201-2/+2
| | | | | | | | | | | | | | | device_name[] can become non-empty only in bdrv_new_root() and bdrv_move_feature_fields(). The latter is used only to undo damage done by bdrv_swap(). The former is called only by blk_new_with_bs(). Therefore, when a BlockDriverState's device_name[] is non-empty, then it's been created with a BlockBackend, and vice versa. Furthermore, blk_new_with_bs() keeps the two names equal. Therefore, device_name[] is redundant. Eliminate it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block: Rename qemu_aio_release -> qemu_aio_unrefFam Zheng2014-09-221-1/+1
| | | | | | Suggested-by: Benoît Canet <benoit.canet@irqsave.net> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* quorum: Convert quorum_aiocb_info.cancel to .cancel_asyncFam Zheng2014-09-221-5/+2Star
| | | | | | | | | | | | Before, we cancel all the child requests with bdrv_aio_cancel, then free the acb.. Now we just kick off asynchronous cancellation of child requests and return, we know quorum_aio_cb will be called later, so in the end quorum_aio_finalize will take care of calling the caller's cb. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* quorum: fix quorum_aio_cancel()Liu Yuan2014-09-221-1/+3
| | | | | | | | | | | | | | For a fifo read pattern, we only have one running aio (possible other cases that has less number than num_children in the future), so we need to check if .acb is NULL against bdrv_aio_cancel() to avoid segfault. Cc: Eric Blake <eblake@redhat.com> Cc: Benoit Canet <benoit@irqsave.net> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Liu Yuan <namei.unix@gmail.com> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* quorum: Fix leak of opts in quorum_openFam Zheng2014-08-291-1/+2
| | | | | | Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* block/quorum: add simple read pattern supportLiu Yuan2014-08-291-48/+129
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds single read pattern to quorum driver and quorum vote is default pattern. For now we do a quorum vote on all the reads, it is designed for unreliable underlying storage such as non-redundant NFS to make sure data integrity at the cost of the read performance. For some use cases as following: VM -------------- | | v v A B Both A and B has hardware raid storage to justify the data integrity on its own. So it would help performance if we do a single read instead of on all the nodes. Further, if we run VM on either of the storage node, we can make a local read request for better performance. This patch generalize the above 2 nodes case in the N nodes. That is, vm -> write to all the N nodes, read just one of them. If single read fails, we try to read next node in FIFO order specified by the startup command. The 2 nodes case is very similar to DRBD[1] though lack of auto-sync functionality in the single device/node failure for now. But compared with DRBD we still have some advantages over it: - Suppose we have 20 VMs running on one(assume A) of 2 nodes' DRBD backed storage. And if A crashes, we need to restart all the VMs on node B. But for practice case, we can't because B might not have enough resources to setup 20 VMs at once. So if we run our 20 VMs with quorum driver, and scatter the replicated images over the data center, we can very likely restart 20 VMs without any resource problem. After all, I think we can build a more powerful replicated image functionality on quorum and block jobs(block mirror) to meet various High Availibility needs. E.g, Enable single read pattern on 2 children, -drive driver=quorum,children.0.file.filename=0.qcow2,\ children.1.file.filename=1.qcow2,read-pattern=fifo,vote-threshold=1 [1] http://en.wikipedia.org/wiki/Distributed_Replicated_Block_Device [Dropped \n from an error_setg() error message --Stefan] Cc: Benoit Canet <benoit@irqsave.net> Cc: Eric Blake <eblake@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Liu Yuan <namei.unix@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* quorum: Implement bdrv_refresh_filename()Max Reitz2014-08-201-0/+39
| | | | | Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* quorum: Add the rewrite-corrupted parameter to quorumBenoît Canet2014-06-271-6/+91
| | | | | | | | | | | | | On read operations when this parameter is set and some replicas are corrupted while quorum can be reached quorum will proceed to rewrite the correct version of the data to fix the corrupted replicas. This will shine with SSD where the FTL will remap the same block at another place on rewrite. Signed-off-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-12-22 13:58:39 +0100