summaryrefslogtreecommitdiffstats
path: root/block/vpc.c
Commit message (Collapse)AuthorAgeFilesLines
* block/vpc: Add a sanity check that fixed-size images have the right typeThomas Huth2021-11-021-1/+2
| | | | | | | | | | | | | The code in vpc.c uses BDRVVPCState->footer.type in various places to decide whether the image is a fixed-size (VHD_FIXED) or a dynamic (VHD_DYNAMIC) image. However, we never check that this field really contains VHD_FIXED if we detected a fixed size image in vpc_open(), so a wrong value here could cause quite some trouble during runtime. Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20211012082702.792259-1-thuth@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
* block: use int64_t instead of uint64_t in driver write handlersVladimir Sementsov-Ogievskiy2021-09-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We are generally moving to int64_t for both offset and bytes parameters on all io paths. Main motivation is realization of 64-bit write_zeroes operation for fast zeroing large disk chunks, up to the whole disk. We chose signed type, to be consistent with off_t (which is signed) and with possibility for signed return type (where negative value means error). So, convert driver write handlers parameters which are already 64bit to signed type. While being here, convert also flags parameter to be BdrvRequestFlags. Now let's consider all callers. Simple git grep '\->bdrv_\(aio\|co\)_pwritev\(_part\)\?' shows that's there three callers of driver function: bdrv_driver_pwritev() and bdrv_driver_pwritev_compressed() in block/io.c, both pass int64_t, checked by bdrv_check_qiov_request() to be non-negative. qcow2_save_vmstate() does bdrv_check_qiov_request(). Still, the functions may be called directly, not only by drv->... Let's check: git grep '\.bdrv_\(aio\|co\)_pwritev\(_part\)\?\s*=' | \ awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \ while read func; do git grep "$func(" | \ grep -v "$func(BlockDriverState"; done shows several callers: qcow2: qcow2_co_truncate() write at most up to @offset, which is checked in generic qcow2_co_truncate() by bdrv_check_request(). qcow2_co_pwritev_compressed_task() pass the request (or part of the request) that already went through normal write path, so it should be OK qcow: qcow_co_pwritev_compressed() pass int64_t, it's updated by this patch quorum: quorum_co_pwrite_zeroes() pass int64_t and int - OK throttle: throttle_co_pwritev_compressed() pass int64_t, it's updated by this patch vmdk: vmdk_co_pwritev_compressed() pass int64_t, it's updated by this patch Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210903102807.27127-5-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
* block: use int64_t instead of uint64_t in driver read handlersVladimir Sementsov-Ogievskiy2021-09-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We are generally moving to int64_t for both offset and bytes parameters on all io paths. Main motivation is realization of 64-bit write_zeroes operation for fast zeroing large disk chunks, up to the whole disk. We chose signed type, to be consistent with off_t (which is signed) and with possibility for signed return type (where negative value means error). So, convert driver read handlers parameters which are already 64bit to signed type. While being here, convert also flags parameter to be BdrvRequestFlags. Now let's consider all callers. Simple git grep '\->bdrv_\(aio\|co\)_preadv\(_part\)\?' shows that's there three callers of driver function: bdrv_driver_preadv() in block/io.c, passes int64_t, checked by bdrv_check_qiov_request() to be non-negative. qcow2_load_vmstate() does bdrv_check_qiov_request(). do_perform_cow_read() has uint64_t argument. And a lot of things in qcow2 driver are uint64_t, so converting it is big job. But we must not work with requests that don't satisfy bdrv_check_qiov_request(), so let's just assert it here. Still, the functions may be called directly, not only by drv->... Let's check: git grep '\.bdrv_\(aio\|co\)_preadv\(_part\)\?\s*=' | \ awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \ while read func; do git grep "$func(" | \ grep -v "$func(BlockDriverState"; done The only one such caller: QEMUIOVector qiov = QEMU_IOVEC_INIT_BUF(qiov, &data, 1); ... ret = bdrv_replace_test_co_preadv(bs, 0, 1, &qiov, 0); in tests/unit/test-bdrv-drain.c, and it's OK obviously. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210903102807.27127-4-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: fix typos] Signed-off-by: Eric Blake <eblake@redhat.com>
* block/vpc: Use sizeof() instead of HEADER_SIZE for footer sizeMarkus Armbruster2020-12-181-15/+14Star
| | | | | | | Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20201217162003.1102738-10-armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block/vpc: Pass footer buffers as VHDFooter * instead of uint8_t *Markus Armbruster2020-12-181-7/+7
| | | | | | | Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20201217162003.1102738-9-armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block/vpc: Pad VHDFooter, replace uint8_t[] buffersMarkus Armbruster2020-12-181-40/+37Star
| | | | | | | | | | | | | | | | | | | | Pad VHDFooter as specified in the "Virtual Hard Disk Image Format Specification" version 1.0[*]. Change footer buffers from uint8_t[HEADER_SIZE] to VHDFooter. Their size remains the same. The VHDFooter * variables pointing to a VHDFooter variable right next to it are now silly. Eliminate them, and shorten the remaining variables' names. Most variables pointing to s->footer are now also silly. Eliminate them, too. [*] http://download.microsoft.com/download/f/f/e/ffef50a5-07dd-4cf8-aaa3-442c0673a029/Virtual%20Hard%20Disk%20Format%20Spec_10_18_06.doc Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20201217162003.1102738-8-armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block/vpc: Use sizeof() instead of 1024 for dynamic header sizeMarkus Armbruster2020-12-181-4/+5
| | | | | | | Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20201217162003.1102738-7-armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block/vpc: Pad VHDDynDiskHeader, replace uint8_t[] buffersMarkus Armbruster2020-12-181-22/+19Star
| | | | | | | | | | | | | | | | | Pad VHDDynDiskHeader as specified in the "Virtual Hard Disk Image Format Specification" version 1.0[*]. Change dynamic disk header buffers from uint8_t[1024] to VHDDynDiskHeader. Their size remains the same. The VHDDynDiskHeader * variables pointing to a VHDDynDiskHeader variable right next to it are now silly. Eliminate them. [*] http://download.microsoft.com/download/f/f/e/ffef50a5-07dd-4cf8-aaa3-442c0673a029/Virtual%20Hard%20Disk%20Format%20Spec_10_18_06.doc Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20201217162003.1102738-6-armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block/vpc: Make vpc_checksum() take void *Markus Armbruster2020-12-181-1/+2
| | | | | | | | | | | Some of the next commits will checksum structs. Change vpc_checksum() to take void * instead of uint8_t, to save us pointless casts to uint8_t *. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20201217162003.1102738-5-armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block/vpc: Don't abuse the footer buffer for dynamic headerMarkus Armbruster2020-12-181-10/+12
| | | | | | | | | | | | | | | | | create_dynamic_disk() takes a buffer holding the footer as first argument. It writes out the footer (512 bytes), then reuses the buffer to initialize and write out the dynamic header (1024 bytes). Works, because the caller passes a buffer that is large enough for both purposes. I hate that. Use a separate buffer for the dynamic header, and adjust the caller's buffer. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20201217162003.1102738-4-armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block/vpc: Don't abuse the footer buffer as BAT sector bufferMarkus Armbruster2020-12-181-2/+3
| | | | | | | | | | | | | | | | | | create_dynamic_disk() takes a buffer holding the footer as first argument. It writes out the footer (512 bytes), then reuses the buffer to initialize and write out the dynamic header (1024 bytes), then reuses it again to initialize and write out BAT sectors (512). Works, because the caller passes a buffer that is large enough for all three purposes. I hate that. Use a separate buffer for writing out BAT sectors. The next commit will do the same for the dynamic header. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20201217162003.1102738-3-armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block/vpc: Make vpc_open() read the full dynamic headerMarkus Armbruster2020-12-181-4/+4
| | | | | | | | | | | | | | | | | | | The dynamic header's size is 1024 bytes. vpc_open() reads only the 512 bytes of the dynamic header into buf[]. Works, because it doesn't actually access the second half. However, a colleague told me that GCC 11 warns: ../block/vpc.c:358:51: error: array subscript 'struct VHDDynDiskHeader[0]' is partly outside array bounds of 'uint8_t[512]' [-Werror=array-bounds] Clean up to read the full header. Rename buf[] to dyndisk_header_buf[] while there. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20201217162003.1102738-2-armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block: Fix some code style problems, "foo* bar" should be "foo *bar"shiliyang2020-11-091-5/+5
| | | | | | | | | | There have some code style problems be found when read the block driver code. So I fixes some problems of this error, ERROR: "foo* bar" should be "foo *bar". Signed-off-by: Liyang Shi <shiliyang@huawei.com> Reported-by: Euler Robot <euler.robot@huawei.com> Message-Id: <3211f389-6d22-46c1-4a16-e6a2ba66f070@huawei.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
* error: Avoid error_propagate() after migrate_add_blocker()Markus Armbruster2020-07-101-3/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When migrate_add_blocker(blocker, &errp) is followed by error_propagate(errp, err), we can often just as well do migrate_add_blocker(..., errp). Do that with this Coccinelle script: @@ expression blocker, err, errp; expression ret; @@ - ret = migrate_add_blocker(blocker, &err); - if (err) { + ret = migrate_add_blocker(blocker, errp); + if (ret < 0) { ... when != err; - error_propagate(errp, err); ... } @@ expression blocker, err, errp; @@ - migrate_add_blocker(blocker, &err); - if (err) { + if (migrate_add_blocker(blocker, errp) < 0) { ... when != err; - error_propagate(errp, err); ... } Double-check @err is not used afterwards. Dereferencing it would be use after free, but checking whether it's null would be legitimate. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-43-armbru@redhat.com>
* qapi: Smooth another visitor error checking patternMarkus Armbruster2020-07-101-5/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | Convert visit_type_FOO(v, ..., &ptr, &err); ... if (err) { ... } to visit_type_FOO(v, ..., &ptr, errp); ... if (!ptr) { ... } for functions that set @ptr to non-null / null on success / error. Eliminate error_propagate() that are now unnecessary. Delete @err that are now unused. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-40-armbru@redhat.com>
* error: Eliminate error_propagate() with Coccinelle, part 2Markus Armbruster2020-07-101-2/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. The previous commit did that with a Coccinelle script I consider fairly trustworthy. This commit uses the same script with the matching of return taken out, i.e. we convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... } to if (!foo(..., errp)) { ... ... } This is unsound: @err could still be read between afterwards. I don't know how to express "no read of @err without an intervening write" in Coccinelle. Instead, I manually double-checked for uses of @err. Suboptimal line breaks tweaked manually. qdev_realize() simplified further to placate scripts/checkpatch.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-36-armbru@redhat.com>
* error: Eliminate error_propagate() with Coccinelle, part 1Markus Armbruster2020-07-101-2/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
* qemu-option: Use returned bool to check for failureMarkus Armbruster2020-07-101-2/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The previous commit enables conversion of foo(..., &err); if (err) { ... } to if (!foo(..., &err)) { ... } for QemuOpts functions that now return true / false on success / error. Coccinelle script: @@ identifier fun = { opts_do_parse, parse_option_bool, parse_option_number, parse_option_size, qemu_opt_parse, qemu_opt_rename, qemu_opt_set, qemu_opt_set_bool, qemu_opt_set_number, qemu_opts_absorb_qdict, qemu_opts_do_parse, qemu_opts_from_qdict_entry, qemu_opts_set, qemu_opts_validate }; expression list args, args2; typedef Error; Error *err; @@ - fun(args, &err, args2); - if (err) + if (!fun(args, &err, args2)) { ... } A few line breaks tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-15-armbru@redhat.com> [Conflict with commit 0b6786a9c1 "block/amend: refactor qcow2 amend options" resolved by rerunning Coccinelle on master's version]
* block/vpc: return ZERO block-status when appropriateVladimir Sementsov-Ogievskiy2020-07-061-2/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case when get_image_offset() returns -1, we do zero out the corresponding chunk of qiov. So, this should be reported as ZERO. Note that this changes visible output of "qemu-img map --output=json" and "qemu-io -c map" commands. For qemu-img map, the change is obvious: we just mark as zero what is really zero. For qemu-io it's less obvious: what was unallocated now is allocated. There is an inconsistency in understanding of unallocated regions in Qemu: backing-supporting format-drivers return 0 block-status to report go-to-backing logic for this area. Some protocol-drivers (iscsi) return 0 to report fs-unallocated-non-zero status (i.e., don't occupy space on disk, read result is undefined). BDRV_BLOCK_ALLOCATED is defined as something more close to go-to-backing logic. Still it is calculated as ZERO | DATA, so 0 from iscsi is treated as unallocated. It doesn't influence backing-chain behavior, as iscsi can't have backing file. But it does influence "qemu-io -c map". We should solve this inconsistency at some future point. Now, let's just make backing-not-supporting format drivers (vdi in the previous patch and vpc now) to behave more like backing-supporting drivers and not report 0 block-status. More over, returning ZERO status is absolutely valid thing, and again, corresponds to how the other format-drivers (backing-supporting) work. After block-status update, it never reports 0, so setting unallocated_blocks_are_zero doesn't make sense (as the only user of it is bdrv_co_block_status and it checks unallocated_blocks_are_zero only for unallocated areas). Drop it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200528094405.145708-5-vsementsov@virtuozzo.com> [mreitz: qemu-io -c map as used by iotest 146 now reports everything as allocated; in order to make the test do something useful, we use qemu-img map --output=json now] Signed-off-by: Max Reitz <mreitz@redhat.com>
* block: Use bdrv_default_perms()Max Reitz2020-05-181-1/+1
| | | | | | | | | | | | | | | | | | bdrv_default_perms() can decide which permission profile to use based on the BdrvChildRole, so block drivers do not need to select it explicitly. The blkverify driver now no longer shares the WRITE permission for the image to verify. We thus have to adjust two places in test-block-iothread not to take it. (Note that in theory, blkverify should behave like quorum in this regard and share neither WRITE nor RESIZE for both of its children. In practice, it does not really matter, because blkverify is used only for debugging, so we might as well keep its permissions rather liberal.) Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200513110544.176672-30-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block: Make format drivers use child_of_bdsMax Reitz2020-05-181-2/+2
| | | | | | | | | | | Commonly, they need to pass the BDRV_CHILD_IMAGE set as the BdrvChildRole; but there are exceptions for drivers with external data files (qcow2 and vmdk). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200513110544.176672-26-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block: Add BdrvChildRole to BdrvChildMax Reitz2020-05-181-1/+1
| | | | | | | | | | For now, it is always set to 0. Later patches in this series will ensure that all callers pass an appropriate combination of flags. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200513110544.176672-6-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block: Add BlockDriver.is_formatMax Reitz2020-05-181-0/+1
| | | | | | | | | | | | | | | We want to unify child_format and child_file at some point. One of the important things that set format drivers apart from other drivers is that they do not expect other format nodes under them (except in the backing chain), i.e. we must not probe formats inside of formats. That means we need something on which to distinguish format drivers from others, and hence this flag. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-Id: <20200513110544.176672-3-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block: Add blk_new_with_bs() helperEric Blake2020-05-051-4/+4
| | | | | | | | | | | | | | | There are several callers that need to create a new block backend from an existing BDS; make the task slightly easier with a common helper routine. Suggested-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200424190903.522087-2-eblake@redhat.com> [mreitz: Set @ret only in error paths, see https://lists.nongnu.org/archive/html/qemu-block/2020-04/msg01216.html] Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200428192648.749066-2-eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
* block-backend: Add flags to blk_truncate()Kevin Wolf2020-04-301-1/+1
| | | | | | | | | | | | Now that node level interface bdrv_truncate() supports passing request flags to the block driver, expose this on the BlockBackend level, too. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200424125448.63318-4-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* vpc: Don't round up already aligned BAT sizesKevin Wolf2020-04-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | As reported on Launchpad, Azure apparently doesn't accept images for upload that are not both aligned to 1 MB blocks and have a BAT size that matches the image size exactly. As far as I can tell, there is no real reason why we create a BAT that is one entry longer than necessary for aligned image sizes, so change that. (Even though the condition is only mentioned as "should" in the spec and previous products accepted larger BATs - but we'll try to maintain compatibility with as many of Microsoft's ever-changing interpretations of the VHD spec as possible.) Fixes: https://bugs.launchpad.net/bugs/1870098 Reported-by: Tobias Witek Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200402093603.2369-1-kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block: pass BlockDriver reference to the .bdrv_co_createMaxim Levitsky2020-03-261-2/+4
| | | | | | | | | | | This will allow the reuse of a single generic .bdrv_co_create implementation for several drivers. No functional changes. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200326011218.29230-2-mlevitsk@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Max Reitz <mreitz@redhat.com>
* block: Add @exact parameter to bdrv_co_truncate()Max Reitz2019-10-281-1/+1
| | | | | | | | | | | | | | | | | | | | We have two drivers (iscsi and file-posix) that (in some cases) return success from their .bdrv_co_truncate() implementation if the block device is larger than the requested offset, but cannot be shrunk. Some callers do not want that behavior, so this patch adds a new parameter that they can use to turn off that behavior. This patch just adds the parameter and lets the block/io.c and block/block-backend.c functions pass it around. All other callers always pass false and none of the implementations evaluate it, so that this patch does not change existing behavior. Future patches take care of that. Suggested-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190918095144.955-5-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
* vpc: Return 0 from vpc_co_create() on successMax Reitz2019-09-101-1/+2
| | | | | | | | | | | | | | | | | | blockdev_create_run() directly uses .bdrv_co_create()'s return value as the job's return value. Jobs must return 0 on success, not just any nonnegative value. Therefore, using blockdev-create for VPC images may currently fail as the vpc driver may return a positive integer. Because there is no point in returning a positive integer anywhere in the block layer (all non-negative integers are generally treated as complete success), we probably do not want to add more such cases. Therefore, fix this problem by making the vpc driver always return 0 in case of success. Suggested-by: Kevin Wolf <kwolf@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* vpc: Do not return RAW from block_statusMax Reitz2019-08-191-1/+1
| | | | | | | | | | | | | | | vpc is not really a passthrough driver, even when using the fixed subformat (where host and guest offsets are equal). It should handle preallocation like all other drivers do, namely by returning DATA | RECURSE instead of RAW. There is no tangible difference but the fact that bdrv_is_allocated() no longer falls through to the protocol layer. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190725155512.9827-4-mreitz@redhat.com Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
* block: Add BlockBackend.ctxKevin Wolf2019-06-041-1/+2
| | | | | | | | | | | | This adds a new parameter to blk_new() which requires its callers to declare from which AioContext this BlockBackend is going to be used (or the locks of which AioContext need to be taken anyway). The given context is only stored and kept up to date when changing AioContexts. Actually applying the stored AioContext to the root node is saved for another commit. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* vpc: unlock Coroutine lock to make IO submit ConcurrentlyZhengui li2019-04-301-0/+4
| | | | | | | | | | | | Concurrent IO becomes serial IO because of the qemu Coroutine lock, which reduce IO performance severely. So unlock Coroutine lock before bdrv_co_pwritev and bdrv_co_preadv to fix it. Signed-off-by: Zhengui li <lizhengui@huawei.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block: Add strong_runtime_opts to BlockDriverMax Reitz2019-02-251-0/+7
| | | | | | | | | | | | | | | | | | This new field can be set by block drivers to list the runtime options they accept that may influence the contents of the respective BDS. As of a follow-up patch, this list will be used by the common bdrv_refresh_filename() implementation to decide which options to put into BDS.full_open_options (and consequently whether a JSON filename has to be created), thus freeing the drivers of having to implement that logic themselves. Additionally, this patch adds the field to all of the block drivers that need it and sets it accordingly. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-id: 20190201192935.18394-22-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
* block/vpc: Don't take address of fields in packed structsPeter Maydell2019-02-011-1/+3
| | | | | | | | | | | | Taking the address of a field in a packed struct is a bad idea, because it might not be actually aligned enough for that pointer type (and thus cause a crash on dereference on some host architectures). Newer versions of clang warn about this. Avoid the bug by generating the UUID into a local variable which is definitely safely aligned and then copying it into place. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* avoid TABs in files that only contain a fewPaolo Bonzini2019-01-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most files that have TABs only contain a handful of them. Change them to spaces so that we don't confuse people. disas, standard-headers, linux-headers and libdecnumber are imported from other projects and probably should be exempted from the check. Outside those, after this patch the following files still contain both 8-space and TAB sequences at the beginning of the line. Many of them have a majority of TABs, or were initially committed with all tabs. bsd-user/i386/target_syscall.h bsd-user/x86_64/target_syscall.h crypto/aes.c hw/audio/fmopl.c hw/audio/fmopl.h hw/block/tc58128.c hw/display/cirrus_vga.c hw/display/xenfb.c hw/dma/etraxfs_dma.c hw/intc/sh_intc.c hw/misc/mst_fpga.c hw/net/pcnet.c hw/sh4/sh7750.c hw/timer/m48t59.c hw/timer/sh_timer.c include/crypto/aes.h include/disas/bfd.h include/hw/sh4/sh.h libdecnumber/decNumber.c linux-headers/asm-generic/unistd.h linux-headers/linux/kvm.h linux-user/alpha/target_syscall.h linux-user/arm/nwfpe/double_cpdo.c linux-user/arm/nwfpe/fpa11_cpdt.c linux-user/arm/nwfpe/fpa11_cprt.c linux-user/arm/nwfpe/fpa11.h linux-user/flat.h linux-user/flatload.c linux-user/i386/target_syscall.h linux-user/ppc/target_syscall.h linux-user/sparc/target_syscall.h linux-user/syscall.c linux-user/syscall_defs.h linux-user/x86_64/target_syscall.h slirp/cksum.c slirp/if.c slirp/ip.h slirp/ip_icmp.c slirp/ip_icmp.h slirp/ip_input.c slirp/ip_output.c slirp/mbuf.c slirp/misc.c slirp/sbuf.c slirp/socket.c slirp/socket.h slirp/tcp_input.c slirp/tcpip.h slirp/tcp_output.c slirp/tcp_subr.c slirp/tcp_timer.c slirp/tftp.c slirp/udp.c slirp/udp.h target/cris/cpu.h target/cris/mmu.c target/cris/op_helper.c target/sh4/helper.c target/sh4/op_helper.c target/sh4/translate.c tcg/sparc/tcg-target.inc.c tests/tcg/cris/check_addo.c tests/tcg/cris/check_moveq.c tests/tcg/cris/check_swap.c tests/tcg/multiarch/test-mmap.c ui/vnc-enc-hextile-template.h ui/vnc-enc-zywrle.h util/envlist.c util/readline.c The following have only TABs: bsd-user/i386/target_signal.h bsd-user/sparc64/target_signal.h bsd-user/sparc64/target_syscall.h bsd-user/sparc/target_signal.h bsd-user/sparc/target_syscall.h bsd-user/x86_64/target_signal.h crypto/desrfb.c hw/audio/intel-hda-defs.h hw/core/uboot_image.h hw/sh4/sh7750_regnames.c hw/sh4/sh7750_regs.h include/hw/cris/etraxfs_dma.h linux-user/alpha/termbits.h linux-user/arm/nwfpe/fpopcode.h linux-user/arm/nwfpe/fpsr.h linux-user/arm/syscall_nr.h linux-user/arm/target_signal.h linux-user/cris/target_signal.h linux-user/i386/target_signal.h linux-user/linux_loop.h linux-user/m68k/target_signal.h linux-user/microblaze/target_signal.h linux-user/mips64/target_signal.h linux-user/mips/target_signal.h linux-user/mips/target_syscall.h linux-user/mips/termbits.h linux-user/ppc/target_signal.h linux-user/sh4/target_signal.h linux-user/sh4/termbits.h linux-user/sparc64/target_syscall.h linux-user/sparc/target_signal.h linux-user/x86_64/target_signal.h linux-user/x86_64/termbits.h pc-bios/optionrom/optionrom.h slirp/mbuf.h slirp/misc.h slirp/sbuf.h slirp/tcp.h slirp/tcp_timer.h slirp/tcp_var.h target/i386/svm.h target/sparc/asi.h target/xtensa/core-dc232b/xtensa-modules.inc.c target/xtensa/core-dc233c/xtensa-modules.inc.c target/xtensa/core-de212/core-isa.h target/xtensa/core-de212/xtensa-modules.inc.c target/xtensa/core-fsf/xtensa-modules.inc.c target/xtensa/core-sample_controller/core-isa.h target/xtensa/core-sample_controller/xtensa-modules.inc.c target/xtensa/core-test_kc705_be/core-isa.h target/xtensa/core-test_kc705_be/xtensa-modules.inc.c tests/tcg/cris/check_abs.c tests/tcg/cris/check_addc.c tests/tcg/cris/check_addcm.c tests/tcg/cris/check_addoq.c tests/tcg/cris/check_bound.c tests/tcg/cris/check_ftag.c tests/tcg/cris/check_int64.c tests/tcg/cris/check_lz.c tests/tcg/cris/check_openpf5.c tests/tcg/cris/check_sigalrm.c tests/tcg/cris/crisutils.h tests/tcg/cris/sys.c tests/tcg/i386/test-i386-ssse3.c ui/vgafont.h Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20181213223737.11793-3-pbonzini@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* vpc: Don't leak opts in vpc_open()Kevin Wolf2018-11-051-0/+2
| | | | | Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com>
* vpc: Fail open on bad header checksumMarkus Armbruster2018-10-191-3/+5
| | | | | | | | | | | vpc_open() merely prints a warning when it finds a bad header checksum. Turn that into a hard error. Cc: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20181017082702.5581-39-armbru@redhat.com> [Error message capitalized for local consistency] Reviewed-by: Kevin Wolf <kwolf@redhat.com>
* block: Factor out qobject_input_visitor_new_flat_confused()Markus Armbruster2018-06-151-5/+2Star
| | | | | | Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block: Clean up a misuse of qobject_to() in .bdrv_co_create_opts()Markus Armbruster2018-06-151-5/+4Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following pattern occurs in the .bdrv_co_create_opts() methods of parallels, qcow, qcow2, qed, vhdx and vpc: qobj = qdict_crumple_for_keyval_qiv(qdict, errp); qobject_unref(qdict); qdict = qobject_to(QDict, qobj); if (qdict == NULL) { ret = -EINVAL; goto done; } v = qobject_input_visitor_new_keyval(QOBJECT(qdict)); [...] ret = 0; done: qobject_unref(qdict); [...] return ret; If qobject_to() fails, we return failure without setting errp. That's wrong. As far as I can tell, it cannot fail here. Clean it up anyway, by removing the useless conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block: Fix -blockdev for certain non-string scalarsMarkus Armbruster2018-06-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Configuration flows through the block subsystem in a rather peculiar way. Configuration made with -drive enters it as QemuOpts. Configuration made with -blockdev / blockdev-add enters it as QAPI type BlockdevOptions. The block subsystem uses QDict, QemuOpts and QAPI types internally. The precise flow is next to impossible to explain (I tried for this commit message, but gave up after wasting several hours). What I can explain is a flaw in the BlockDriver interface that leads to this bug: $ qemu-system-x86_64 -blockdev node-name=n1,driver=nfs,server.type=inet,server.host=localhost,path=/foo/bar,user=1234 qemu-system-x86_64: -blockdev node-name=n1,driver=nfs,server.type=inet,server.host=localhost,path=/foo/bar,user=1234: Internal error: parameter user invalid QMP blockdev-add is broken the same way. Here's what happens. The block layer passes configuration represented as flat QDict (with dotted keys) to BlockDriver methods .bdrv_file_open(). The QDict's members are typed according to the QAPI schema. nfs_file_open() converts it to QAPI type BlockdevOptionsNfs, with qdict_crumple() and a qobject input visitor. This visitor comes in two flavors. The plain flavor requires scalars to be typed according to the QAPI schema. That's the case here. The keyval flavor requires string scalars. That's not the case here. nfs_file_open() uses the latter, and promptly falls apart for members @user, @group, @tcp-syn-count, @readahead-size, @page-cache-size, @debug. Switching to the plain flavor would fix -blockdev, but break -drive, because there the scalars arrive in nfs_file_open() as strings. The proper fix would be to replace the QDict by QAPI type BlockdevOptions in the BlockDriver interface. Sadly, that's beyond my reach right now. Next best would be to fix the block layer to always pass correctly typed QDicts to the BlockDriver methods. Also beyond my reach. What I can do is throw another hack onto the pile: have nfs_file_open() convert all members to string, so use of the keyval flavor actually works, by replacing qdict_crumple() by new function qdict_crumple_for_keyval_qiv(). The pattern "pass result of qdict_crumple() to qobject_input_visitor_new_keyval()" occurs several times more: * qemu_rbd_open() Same issue as nfs_file_open(), but since BlockdevOptionsRbd has only string members, its only a latent bug. Fix it anyway. * parallels_co_create_opts(), qcow_co_create_opts(), qcow2_co_create_opts(), bdrv_qed_co_create_opts(), sd_co_create_opts(), vhdx_co_create_opts(), vpc_co_create_opts() These work, because they create the QDict with qemu_opts_to_qdict_filtered(), which creates only string scalars. The function sports a TODO comment asking for better typing; that's going to be fun. Use qdict_crumple_for_keyval_qiv() to be safe. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block: Add block-specific QDict headerMax Reitz2018-06-151-0/+1
| | | | | | | | | | | | | | | | | | | | | There are numerous QDict functions that have been introduced for and are used only by the block layer. Move their declarations into an own header file to reflect that. While qdict_extract_subqdict() is in fact used outside of the block layer (in util/qemu-config.c), it is still a function related very closely to how the block layer works with nested QDicts, namely by sometimes flattening them. Therefore, its declaration is put into this header as well and util/qemu-config.c includes it with a comment stating exactly which function it needs. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20180509165530.29561-7-mreitz@redhat.com> [Copyright note tweaked, superfluous includes dropped] Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qobject: Replace qobject_incref/QINCREF qobject_decref/QDECREFMarc-André Lureau2018-05-041-2/+2
| | | | | | | | | | | | | | | | | | | | | Now that we can safely call QOBJECT() on QObject * as well as its subtypes, we can have macros qobject_ref() / qobject_unref() that work everywhere instead of having to use QINCREF() / QDECREF() for QObject and qobject_incref() / qobject_decref() for its subtypes. The replacement is mechanical, except I broke a long line, and added a cast in monitor_qmp_cleanup_req_queue_locked(). Unlike qobject_decref(), qobject_unref() doesn't accept void *. Note that the new macros evaluate their argument exactly once, thus no need to shout them. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Rebased, semantic conflict resolved, commit message improved] Signed-off-by: Markus Armbruster <armbru@redhat.com>
* qapi: Replace qobject_to_X(o) by qobject_to(X, o)Max Reitz2018-03-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch was generated using the following Coccinelle script: @@ expression Obj; @@ ( - qobject_to_qnum(Obj) + qobject_to(QNum, Obj) | - qobject_to_qstring(Obj) + qobject_to(QString, Obj) | - qobject_to_qdict(Obj) + qobject_to(QDict, Obj) | - qobject_to_qlist(Obj) + qobject_to(QList, Obj) | - qobject_to_qbool(Obj) + qobject_to(QBool, Obj) ) and a bit of manual fix-up for overly long lines and three places in tests/check-qjson.c that Coccinelle did not find. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-Id: <20180224154033.29559-4-mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: swap order from qobject_to(o, X), rebase to master, also a fix to latent false-positive compiler complaint about hw/i386/acpi-build.c] Signed-off-by: Eric Blake <eblake@redhat.com>
* vpc: Require aligned size in .bdrv_co_createKevin Wolf2018-03-191-31/+82
| | | | | | | | | | | | Perform the rounding to match a CHS geometry only in the legacy code path in .bdrv_co_create_opts. QMP now requires that the user already passes a CHS aligned image size, unless force-size=true is given. CHS alignment is required to make the image compatible with Virtual PC, but not for use with newer Microsoft hypervisors. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
* vpc: Support .bdrv_co_createKevin Wolf2018-03-191-37/+115
| | | | | | | | This adds the .bdrv_co_create driver callback to vpc, which enables image creation over QMP. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
* block: rename .bdrv_create() to .bdrv_co_create_opts()Stefan Hajnoczi2018-03-021-2/+3
| | | | | | | | | | | | | | | | | | BlockDriver->bdrv_create() has been called from coroutine context since commit 5b7e1542cfa41a281af9629d31cef03704d976e6 ("block: make bdrv_create adopt coroutine"). Make this explicit by renaming to .bdrv_co_create_opts() and add the coroutine_fn annotation. This makes it obvious to block driver authors that they may yield, use CoMutex, or other coroutine_fn APIs. bdrv_co_create is reserved for the QAPI-based version that Kevin is working on. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170705102231.20711-2-stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* vpc: Switch to .bdrv_co_block_status()Eric Blake2018-03-021-22/+23
| | | | | | | | | | We are gradually moving away from sector-based interfaces, towards byte-based. Update the vpc driver accordingly. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* Move include qemu/option.h from qemu-common.h to actual usersMarkus Armbruster2018-02-091-1/+2
| | | | | | | | | | | | | | | | | | qemu-common.h includes qemu/option.h, but most places that include the former don't actually need the latter. Drop the include, and add it to the places that actually need it. While there, drop superfluous includes of both headers, and separate #include from file comment with a blank line. This cleanup makes the number of objects depending on qemu/option.h drop from 4545 (out of 4743) to 284 in my "build everything" tree. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-20-armbru@redhat.com> [Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
* vpc: use DIV_ROUND_UPMarc-André Lureau2017-08-311-2/+2
| | | | | | | | | I used the clang-tidy qemu-round check to generate the fix: https://github.com/elmarco/clang-tools-extra Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
* vpc: Check failure of bdrv_getlength()Eric Blake2017-08-111-1/+8
| | | | | | | | | | | | vpc_open() was checking for bdrv_getlength() failure in one, but not the other, location. Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-12-12 03:34:01 +0100