summaryrefslogtreecommitdiffstats
path: root/docs/specs
Commit message (Collapse)AuthorAgeFilesLines
* treewide: do not use short-form boolean optionsPaolo Bonzini2020-12-101-1/+1
| | | | | | | They are going to be deprecated, avoid warnings on stdout while the tests run. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* acpi: cpuhp: introduce 'firmware performs eject' status/control bitsIgor Mammedov2020-12-091-5/+14
| | | | | | | | | | | | | Adds bit #4 to status/control field of CPU hotplug MMIO interface. New bit will be used OSPM to mark CPUs as pending for removal by firmware, when it calls _EJ0 method on CPU device node. Later on, when firmware sees this bit set, it will perform CPU eject which will clear bit #4 as well. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201207140739.3829993-3-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* docs: Fix some typos (found by codespell)Stefan Weil2020-11-181-1/+1
| | | | | | | | | Fix also a similar typo in a code comment. Signed-off-by: Stefan Weil <sw@weilnetz.de> Message-Id: <20201117193448.393472-1-sw@weilnetz.de> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* docs: add "page source" link to sphinx documentationDaniel P. Berrangé2020-11-101-0/+5
| | | | | | | | | Add a link to the top of the sidebar in every docs page that takes the user back to the source code in gitlab. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20201102130926.161183-5-berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
* pci: allocate pci id for nvmeKlaus Jensen2020-10-272-0/+24
| | | | | | | | | | | | | The emulated nvme device (hw/block/nvme.c) is currently using an internal Intel device id. Prepare to change that by allocating a device id under the 1b36 (Red Hat, Inc.) vendor id. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Keith Busch <kbusch@kernel.org>
* specs/ppc-spapr-numa: update with new NUMA supportDaniel Henrique Barboza2020-10-091-8/+227
| | | | | | | | | | This update provides more in depth information about the choices and drawbacks of the new NUMA support for the spapr machine. Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20201007172849.302240-6-danielhb413@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* docs/: fix some comment spelling errorszhaolichang2020-09-172-4/+4
| | | | | | | | | | | I found that there are many spelling errors in the comments of qemu, so I used the spellcheck tool to check the spelling errors and finally found some spelling errors in the docs folder. Signed-off-by: zhaolichang <zhaolichang@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200917075029.313-4-zhaolichang@huawei.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* spapr: Clarify error and documentation for broken KVM XICSGreg Kurz2020-08-121-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | When starting an L2 KVM guest with `ic-mode=dual,kernel-irqchip=on`, QEMU fails with: KVM is too old to support ic-mode=dual,kernel-irqchip=on This error message was introduced to detect older KVM versions that didn't allow destruction and re-creation of the XICS KVM device that we do at reboot. But it is actually the same issue that we get with nested guests : when running under pseries, KVM currently provides a genuine XICS device (not the XICS-on-XIVE device that we get under powernv) which doesn't support destruction/re-creation. This will eventually be fixed in KVM but in the meantime, update the error message and documentation to mention the nested case. While here, mention that in "No XIVE support in KVM" section that this can also happen with "guest OSes supporting XIVE" since we check this at init time before starting the guest. Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Buglink: https://bugs.launchpad.net/qemu/+bug/1890290 Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <159664243614.622889.18307368735989783528.stgit@bahia.lan> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* docs: Update POWER9 XIVE support for nested guestsCédric Le Goater2020-08-121-0/+5
| | | | | | | | It is not yet supported. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200804131639.407049-1-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* docs: adding NUMA documentation for pseriesDaniel Henrique Barboza2020-08-122-0/+192
| | | | | | | | | | | | | | | | This patch adds a new documentation file, ppc-spapr-numa.rst, informing what developers and user can expect of the NUMA distance support for the pseries machine, up to QEMU 5.1. In the (hopefully soon) future, when we rework the NUMA mechanics of the pseries machine to at least attempt to contemplate user choice, this doc will be extended to inform about the new support. Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20200803133440.825276-1-danielhb413@gmail.com> Tested-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* softmmu/vl: Allow -fw_cfg 'gen_id' option to use the 'etc/' namespacePhilippe Mathieu-Daudé2020-07-031-0/+4
| | | | | | | | | | | Names of user-provided fw_cfg items are supposed to start with "opt/". However FW_CFG_DATA_GENERATOR items are generated by QEMU, so allow the "etc/" namespace in this specific case. Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20200623172726.21040-5-philmd@redhat.com>
* hw/nvram/fw_cfg: Add the FW_CFG_DATA_GENERATOR interfacePhilippe Mathieu-Daudé2020-07-031-1/+8
| | | | | | | | | | The FW_CFG_DATA_GENERATOR allows any object to produce blob of data consumable by the fw_cfg device. Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20200623172726.21040-3-philmd@redhat.com>
* Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell2020-06-251-2/+0Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | virtio,acpi,pci: fixes, cleanups. Fixes, cleanups in ACPI, PCI, virtio. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu 25 Jun 2020 07:48:47 BST # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: Rename use_acpi_pci_hotplug to more appropriate use_acpi_hotplug_bridge Stop vhost-user sending uninitialized mmap_offsets docs/specs/tpm: ACPI boot now supported for TPM/ARM arm/acpi: Add the TPM2.0 device under the DSDT acpi: Some build_tpm2() code reshape tests/acpi: update expected data files acpi: q35: drop _SB.PCI0.ISA.LPCD opregion. acpi: drop build_piix4_pm() acpi: drop serial/parallel enable bits from dsdt acpi: simplify build_isa_devices_aml() acpi: factor out fw_cfg_add_acpi_dsdt() acpi: move aml builder code for i8042 (kbd+mouse) device floppy: move cmos_get_fd_drive_type() from pc floppy: make isa_fdc_get_drive_max_chs static acpi: move aml builder code for floppy device acpi: bios-tables-test: show more context on asl diffs qtest: allow DSDT acpi table changes Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * docs/specs/tpm: ACPI boot now supported for TPM/ARMEric Auger2020-06-241-2/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | ACPI boot now is supported. Let's remove the comment saying it is not. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200622140620.17229-4-eric.auger@redhat.com> Tested-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* | tpm: Move backend code under the 'backends/' directoryPhilippe Mathieu-Daudé2020-06-191-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | TPM subsytem is split into backends (see commit f4ede81eed2) and frontends (see i.e. 3676bc69b35). Keep the emulated hardware 'frontends' under hw/tpm/, but move the backends in the backends/tpm/ directory. Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200612085444.8362-13-philmd@redhat.com Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
* | hw/tpm: Make 'tpm_util.h' publicly accessible as "sysemu/tpm_util.h"Philippe Mathieu-Daudé2020-06-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | We are going to split the TPM backends from the TPM emulated hardware in the next commit. Make the TPM util helpers accessible by moving local "tpm_util.h" to global "sysemu/tpm_util.h". Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Message-id: 20200612085444.8362-12-philmd@redhat.com Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
* | docs/specs/tpm: Correct header path namePhilippe Mathieu-Daudé2020-06-191-1/+1
|/ | | | | | | | | | Commit 8dc6701722 introduce the documentation but an incorrect path name was used. Fix that. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Message-id: 20200612085444.8362-2-philmd@redhat.com Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
* docs: APEI GHES generation and CPER record descriptionDongjiu Geng2020-05-142-0/+111
| | | | | | | | | | | Add APEI/GHES detailed design document Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20200512030609.19593-4-gengdongjiu@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/virt: Add nvdimm hotplug supportShameer Kolothum2020-05-041-1/+2
| | | | | | | | | | | | | | | | | This adds support for nvdimm hotplug events through GED and enables nvdimm for the arm/virt. Now Guests with ACPI can have both cold and hot plug of nvdimms. Hot removal functionality is not yet supported. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20200421125934.14952-5-shameerali.kolothum.thodi@huawei.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* docs: Be consistent about capitalization of 'Arm'Peter Maydell2020-03-122-4/+4
| | | | | | | | | | | | | | | | The company 'Arm' went through a rebranding some years back involving a recapitalization from 'ARM' to 'Arm'. As a result our documentation is a bit inconsistent between the two forms. It's not worth trying to update everywhere in QEMU, but it's easy enough to make docs/ consistent. Note that "ARMv8" and similar architecture names, and older CPU names like "ARM926" still retain all-caps. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200309215818.2021-6-peter.maydell@linaro.org
* docs: Stop building qemu-docPeter Maydell2020-03-061-2/+2
| | | | | | | | | | Stop building the old texinfo qemu-doc; all its contents are now available in the Sphinx-generated manuals and manpages. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200228153619.9906-32-peter.maydell@linaro.org
* docs/specs/tpm: Document TPM_TIS sysbus device for ARMEric Auger2020-03-051-1/+24
| | | | | | | | | | | Update the documentation with recent changes related to the sysbus TPM_TIS device addition and add the command line to be used with arm VIRT. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Message-id: 20200305165149.618-8-eric.auger@redhat.com Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
* acpi: cpuhp: document CPHP_GET_CPU_ID_CMD commandIgor Mammedov2020-02-271-0/+2
| | | | | | | | | | | | | Commit 3a61c8db9d25 introduced CPHP_GET_CPU_ID_CMD command but did not sufficiently describe it. Fix it by adding missing command documentation. Fixes: 3a61c8db9d25 ("acpi: cpuhp: add CPHP_GET_CPU_ID_CMD command") Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <1580306781-228371-1-git-send-email-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* docs/specs/tpm: reST-ify TPM documentationMarc-André Lureau2020-02-023-445/+504
| | | | | | | Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Message-Id: <20200121152935.649898-7-stefanb@linux.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* tpm_spapr: Support TPM for ppc64 using CRQ based interfaceStefan Berger2020-02-021-1/+19
| | | | | | | | | | | | | | | | Implement support for TPM on ppc64 by implementing the vTPM CRQ interface as a frontend. It can use the tpm_emulator driver backend with the external swtpm. The Linux vTPM driver for ppc64 works with this emulation. This TPM emulator also handles the TPM 2 case. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20200121152935.649898-4-stefanb@linux.ibm.com> [dwg: Use device_class_set_props(), tweak Kconfig] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell2020-01-271-7/+11
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Register qdev properties as class properties (Marc-André) * Cleanups (Philippe) * virtio-scsi fix (Pan Nengyuan) * Tweak Skylake-v3 model id (Kashyap) * x86 UCODE_REV support and nested live migration fix (myself) * Advisory mode for pvpanic (Zhenwei) # gpg: Signature made Fri 24 Jan 2020 20:16:23 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (58 commits) build-sys: clean up flags included in the linker command line target/i386: Add the 'model-id' for Skylake -v3 CPU models qdev: use object_property_help() qapi/qmp: add ObjectPropertyInfo.default-value qom: introduce object_property_help() qom: simplify qmp_device_list_properties() vl: print default value in object help qdev: register properties as class properties qdev: move instance properties to class properties qdev: rename DeviceClass.props qdev: set properties with device_class_set_props() object: return self in object_ref() object: release all props object: add object_class_property_add_link() object: express const link with link property object: add direct link flag object: rename link "child" to "target" object: check strong flag with & object: do not free class properties object: add object_property_set_default ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * pvpanic: implement crashloaded event handlingzhenwei pi2020-01-241-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | Handle bit 1 write, then post event to monitor. Suggested by Paolo, declear a new event, using GUEST_PANICKED could cause upper layers to react by shutting down or rebooting the guest. In advance for extention, add GuestPanicInformation in event message. Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20200114023102.612548-3-pizhenwei@bytedance.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
| * pvpanic: introduce crashloaded for pvpaniczhenwei pi2020-01-241-2/+6
| | | | | | | | | | | | | | | | | | | | | | Add bit 1 for pvpanic. This bit means that guest hits a panic, but guest wants to handle error by itself. Typical case: Linux guest runs kdump in panic. It will help us to separate the abnormal reboot from normal operation. Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20200114023102.612548-2-pizhenwei@bytedance.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* | acpi: cpuhp: add CPHP_GET_CPU_ID_CMD commandIgor Mammedov2020-01-221-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Firmware can enumerate present at boot APs by broadcasting wakeup IPI, so that woken up secondary CPUs could register them-selves. However in CPU hotplug case, it would need to know architecture specific CPU IDs for possible and hotplugged CPUs so it could prepare environment for and wake hotplugged AP. Reuse and extend existing CPU hotplug interface to return architecture specific ID for currently selected CPU in 2 registers: - lower 32 bits in ACPI_CPU_CMD_DATA_OFFSET_RW - upper 32 bits in ACPI_CPU_CMD_DATA2_OFFSET_R On x86, firmware will use CPHP_GET_CPU_ID_CMD for fetching the APIC ID when handling hotplug SMI. Later, CPHP_GET_CPU_ID_CMD will be used on ARM to retrieve MPIDR, which serves the similar to APIC ID purpose. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1575896942-331151-10-git-send-email-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
* | acpi: cpuhp: spec: add typical usecasesIgor Mammedov2020-01-221-3/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | Document work-flows for * enabling/detecting modern CPU hotplug interface * finding a CPU with pending 'insert/remove' event * enumerating present and possible CPUs Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1575896942-331151-9-git-send-email-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
* | acpi: cpuhp: introduce 'Command data 2' fieldIgor Mammedov2020-01-221-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | No functional change in practice, patch only aims to properly document (in spec and code) intended usage of the reserved space. The new field is to be used for 2 purposes: - detection of modern CPU hotplug interface using CPHP_GET_NEXT_CPU_WITH_EVENT_CMD command. procedure will be described in follow up patch: "acpi: cpuhp: spec: add typical usecases" - for returning upper 32 bits of architecture specific CPU ID, for new CPHP_GET_CPU_ID_CMD command added by follow up patch: "acpi: cpuhp: add CPHP_GET_CPU_ID_CMD command" Change is backward compatible with 4.2 and older machines, as field was unconditionally reserved and always returned 0x0 if modern CPU hotplug interface was enabled. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1575896942-331151-8-git-send-email-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
* | acpi: cpuhp: spec: clarify store into 'Command data' when 'Command field' == 0Igor Mammedov2020-01-221-2/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | Write section of 'Command data' register should describe what happens when it's written into. Correct description in case the last stored 'Command field' value is equal to 0, to reflect that currently it's not supported. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <1575896942-331151-7-git-send-email-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* | acpi: cpuhp: spec: fix 'Command data' descriptionIgor Mammedov2020-01-221-6/+5Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Correct returned value description in case 'Command field' == 0x0, it's not PXM but CPU selector value with pending event In addition describe 0 blanket value in case of not supported 'Command field' value. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <1575896942-331151-6-git-send-email-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* | acpi: cpuhp: spec: clarify 'CPU selector' register usage and endiannessIgor Mammedov2020-01-221-6/+12
|/ | | | | | | | | | | | | | * Move reserved registers to the top of the section, so reader would be aware of effects when reading registers description. * State registers endianness explicitly at the beginning of the section * Describe registers behavior in case of 'CPU selector' register contains value that doesn't point to a possible CPU. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <1575896942-331151-5-git-send-email-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* global: Squash 'the the'Dr. David Alan Gilbert2019-11-063-3/+3
| | | | | | | | | | | | 'the' has a tendency to double up; squash them back down. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191104185202.102504-1-dgilbert@redhat.com> [lv: removed disas/libvixl/vixl/invalset.h change] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* docs/specs: Add ACPI GED documentationShameer Kolothum2019-10-052-0/+71
| | | | | | | | | | | | Documents basic concepts of ACPI Generic Event device(GED) and interface between QEMU and the ACPI BIOS. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20190918130633.4872-10-shameerali.kolothum.thodi@huawei.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* docs/specs: initial spec summary for Ultravisor-related hcallsMichael Roth2019-08-211-0/+76
| | | | | | | | | | | | | For now this only covers hcalls relating to TPM communication since it's the only one particularly important from a QEMU perspective atm, but others can be added here where it makes sense. The full specification for all hcalls/ucalls will eventually be made available in the public/OpenPower version of the PAPR specification. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Message-Id: <20190717205842.17827-2-mdroth@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* xics/spapr: Detect old KVM XICS on POWER9 hostsGreg Kurz2019-07-021-2/+2
| | | | | | | | | | | | | | | | | | | | Older KVMs on POWER9 don't support destroying/recreating a KVM XICS device, which is required by 'dual' interrupt controller mode. This causes QEMU to emit a warning when the guest is rebooted and to fall back on XICS emulation: qemu-system-ppc64: warning: kernel_irqchip allowed but unavailable: Error on KVM_CREATE_DEVICE for XICS: File exists If kernel irqchip is required, QEMU will thus exit when the guest is first rebooted. Failing QEMU this late may be a painful experience for the user. Detect that and exit at machine init instead. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <156044430517.125694.6207865998817342638.stgit@bahia.lab.toulouse-stg.fr.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* docs: updates on the POWER9 XIVE interrupt controller documentationCédric Le Goater2019-07-022-10/+111
| | | | | | | | | | | This includes various small updates and a better description of the chosen interrupt mode resulting from the combination of the 'ic-mode' machine option, the 'kernel_irqchip' option, guest support and KVM support. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190612160425.27670-1-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* docs: Build and install specs manualPeter Maydell2019-06-171-0/+16
| | | | | | | | | Now we have some rST format docs in the docs/specs/ manual, we should actually build and install it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-id: 20190610152444.20859-3-peter.maydell@linaro.org
* docs/specs/index.rst: Fix minor syntax issuesPeter Maydell2019-06-171-4/+5
| | | | | | | | | | | | | | | | | | | | The docs/specs/index.rst has a couple of minor issues which we didn't notice because we weren't building the manual: * the ToC entry for the new PPC XIVE docs points to a nonexistent file * the initial comment needs to be marked by '..', not '.', or it will appear in the output * the title doesn't match the capitialization used by the existing interop or devel manuals, and uses 'full-system emulation' rather than the 'system emulation' that the interop manual title uses Fix these minor issues before we start trying to build the manual. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-id: 20190610152444.20859-2-peter.maydell@linaro.org
* docs: provide documentation on the POWER9 XIVE interrupt controllerCédric Le Goater2019-05-293-0/+386
| | | | | | | | | | | | | This documents the overall XIVE architecture and the XIVE support for sPAPR guest machines (pseries). It also provides documentation on the 'info pic' command. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190521082411.24719-1-clg@kaod.org> Reviewed-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* acpi: add ACPI memory clear interfaceMarc-André Lureau2019-01-181-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | The interface is described in the "TCG Platform Reset Attack Mitigation Specification", chapter 6 "ACPI _DSM Function". According to Laszlo, it's not so easy to implement in OVMF, he suggested to do it in qemu instead. See specification documentation for more details, and next commit for memory clear on reset handling. The underlying TCG specification is accessible from the following page. https://trustedcomputinggroup.org/resource/pc-client-work-group-platform-reset-attack-mitigation-specification-version-1-0/ This patch implements version 1.0. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* acpi: build TPM Physical Presence interfaceStefan Berger2019-01-181-0/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TPM Physical Presence interface consists of an ACPI part, a shared memory part, and code in the firmware. Users can send messages to the firmware by writing a code into the shared memory through invoking the ACPI code. When a reboot happens, the firmware looks for the code and acts on it by sending sequences of commands to the TPM. This patch adds the ACPI code. It is similar to the one in EDK2 but doesn't assume that SMIs are necessary to use. It uses a similar datastructure for the shared memory as EDK2 does so that EDK2 and SeaBIOS could both make use of it. I extended the shared memory data structure with an array of 256 bytes, one for each code that could be implemented. The array contains flags describing the individual codes. This decouples the ACPI implementation from the firmware implementation. The underlying TCG specification is accessible from the following page. https://trustedcomputinggroup.org/tcg-physical-presence-interface-specification/ This patch implements version 1.30. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> [ Marc-André - ACPI code improvements and windows fixes ] Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* acpi: expose TPM/PPI configuration parameters to firmware via fw_cfgStefan Berger2019-01-181-0/+19
| | | | | | | | | | | | | | | | | To avoid having to hard code the base address of the PPI virtual memory device we introduce a fw_cfg file etc/tpm/config that holds the base address of the PPI device, the version of the PPI interface and the version of the attached TPM. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> [ Marc-André: renamed to etc/tpm/config, made it static, document it ] Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* hw/misc/ivshmem: Remove deprecated "ivshmem" legacy deviceThomas Huth2019-01-151-2/+6
| | | | | | | | | | | | | | | It's been marked as deprecated in QEMU v2.6.0 already, so really nobody should use the legacy "ivshmem" device anymore (but use ivshmem-plain or ivshmem-doorbell instead). Time to remove the deprecated device now. Belatedly also update a mention of the deprecated "ivshmem" in the file docs/specs/ivshmem-spec.txt to "ivshmem-doorbell". Missed in commit 5400c02b90b ("ivshmem: Split ivshmem-plain, ivshmem-doorbell off ivshmem"). Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* pci-testdev: add optional memory barGerd Hoffmann2018-11-051-5/+10
| | | | | | | | | | | | | Add memory bar to pci-testdev. Size is configurable using the membar property. Setting the size to zero (default) turns it off. Can be used to check whether guests handle large pci bars correctly. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* docs: tpm: Mention implemented TPM CRB interface emulation and specsStefan Berger2018-10-301-0/+15
| | | | | | | | Add a few sentences about the implemented emulation of the TPM CRB interface and its specification. Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
* display/stdvga: add edid support.Gerd Hoffmann2018-09-271-1/+1
| | | | | | | | | | | | | | | This patch adds edid support to the qemu stdvga. It is turned off by default and can be enabled with the new edid property. The patch also adds xres and yres properties to specify the video mode you want the guest use. Works only with edid enabled and updated guest driver. The mmio bar of the stdvga has some unused address space at the start. It was reserved just in case it'll be needed for virtio, but it turned out to not be needed for that. So let's use that region to place the EDID data block there. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180925075646.25114-6-kraxel@redhat.com
* docs: Grammar and spelling fixesVille Skyttä2018-07-133-3/+4
| | | | | | | | Signed-off-by: Ville Skyttä <ville.skytta@iki.fi> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180612065150.21110-1-ville.skytta@iki.fi Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-12-18 13:30:22 +0100