summaryrefslogtreecommitdiffstats
path: root/hw/arm/sbsa-ref.c
Commit message (Collapse)AuthorAgeFilesLines
* sbsa-ref: add 'max' to list of allowed cpusMarcin Juszkiewicz2021-03-051-0/+1
| | | | | | | | | | | Let add 'max' cpu while work goes on adding newer CPU types than Cortex-A72. This allows us to check SVE etc support. Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Acked-by: Leif Lindholm <leif@nuviainc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210216150122.3830863-3-marcin.juszkiewicz@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* sbsa-ref: remove cortex-a53 from list of supported cpusMarcin Juszkiewicz2021-03-051-1/+0Star
| | | | | | | | | | | Cortex-A53 supports 40bits of address space. sbsa-ref's memory starts above this limit. Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Leif Lindholm <leif@nuviainc.com> Message-id: 20210216150122.3830863-2-marcin.juszkiewicz@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* vl: extract softmmu/datadir.cPaolo Bonzini2020-12-101-0/+1
| | | | | Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* arm: remove bios_namePaolo Bonzini2020-12-101-0/+2
| | | | | | | | | | Get the firmware name from the MachineState object. Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20201026143028.3034018-4-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* sbsa-ref: allow to use Cortex-A53/57/72 cpusMarcin Juszkiewicz2020-12-101-3/+20
| | | | | | | | | | | | | Trusted Firmware now supports A72 on sbsa-ref by default [1] so enable it for QEMU as well. A53 was already enabled there. 1. https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/7117 Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201120141705.246690-1-marcin.juszkiewicz@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/sbsa-ref: add SBSA watchdog deviceShashi Mallela2020-10-271-0/+23
| | | | | | | | | | Included the newly implemented SBSA generic watchdog device model into SBSA platform Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20201027015927.29495-3-shashi.mallela@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/sbsa-ref : allocate IRQs for SMMUv3Graeme Gregory2020-10-081-0/+1
| | | | | | | | | | | | | | Original commit did not allocate IRQs for the SMMUv3 in the irqmap effectively using irq 0->3 (shared with other devices). Assuming original intent was to allocate unique IRQs then add an allocation to the irqmap. Fixes: e9fdf453240 ("hw/arm: Add arm SBSA reference machine, devices part") Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Graeme Gregory <graeme@nuviainc.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20201007100732.4103790-3-graeme@nuviainc.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/sbsa-ref : Fix SMMUv3 InitialisationGraeme Gregory2020-10-081-1/+1
| | | | | | | | | | | | | SMMUv3 has an error in a previous patch where an i was transposed to a 1 meaning interrupts would not have been correctly assigned to the SMMUv3 instance. Fixes: 48ba18e6d3f3 ("hw/arm/sbsa-ref: Simplify by moving the gic in the machine state") Signed-off-by: Graeme Gregory <graeme@nuviainc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20201007100732.4103790-2-graeme@nuviainc.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* move MemMapEntryGerd Hoffmann2020-09-301-5/+0Star
| | | | | | | | | It is defined twice already. Move to a common header file to remove duplication and make it available to everybody. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200928104256.9241-2-kraxel@redhat.com
* qom: simplify object_find_property / object_class_find_propertyDaniel P. Berrangé2020-09-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | When debugging QEMU it is often useful to put a breakpoint on the error_setg_internal method impl. Unfortunately the object_property_add / object_class_property_add methods call object_property_find / object_class_property_find methods to check if a property exists already before adding the new property. As a result there are a huge number of calls to error_setg_internal on startup of most QEMU commands, making it very painful to set a breakpoint on this method. Most callers of object_find_property and object_class_find_property, however, pass in a NULL for the Error parameter. This simplifies the methods to remove the Error parameter entirely, and then adds some new wrapper methods that are able to raise an Error when needed. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200914135617.1493072-1-berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost2020-09-181-3/+1Star
| | | | | | | | | | | | | This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* Use DECLARE_*CHECKER* macrosEduardo Habkost2020-09-091-2/+2
| | | | | | | | | | | | | | | Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* Move QOM typedefs and add missing includesEduardo Habkost2020-09-091-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* hw/arm/sbsa-ref : Add embedded controller in secure memoryGraeme Gregory2020-09-011-0/+14
| | | | | | | | | | | | | Add the previously created sbsa-ec device to the sbsa-ref machine in secure memory so the PSCI implementation in ARM-TF can access it, but not expose it to non secure firmware or OS except by via ARM-TF. Signed-off-by: Graeme Gregory <graeme@nuviainc.com> Reviewed-by: Leif Lindholm <leif@nuviainc.com> Tested-by: Leif Lindholm <leif@nuviainc.com> Message-id: 20200826141952.136164-3-graeme@nuviainc.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/sbsa-ref: add "reg" property to DT cpu nodesLeif Lindholm2020-09-011-6/+23
| | | | | | | | | | | | | | | | | The sbsa-ref platform uses a minimal device tree to pass amount of memory as well as number of cpus to the firmware. However, when dumping that minimal dtb (with -M sbsa-virt,dumpdtb=<file>), the resulting blob generates a warning when decompiled by dtc due to lack of reg property. Add a simple reg property per cpu, representing a 64-bit MPIDR_EL1. This also ends up being cleaner than having the firmware calculating its own IDs for generating APCI. Signed-off-by: Leif Lindholm <leif@nuviainc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200827124335.30586-1-leif@nuviainc.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/sbsa-ref: fix typo breaking PCIe IRQsGraeme Gregory2020-08-281-1/+1
| | | | | | | | | | | | | Fixing a typo in a previous patch that translated an "i" to a 1 and therefore breaking the allocation of PCIe interrupts. This was discovered when virtio-net-pci devices ceased to function correctly. Cc: qemu-stable@nongnu.org Fixes: 48ba18e6d3f3 ("hw/arm/sbsa-ref: Simplify by moving the gic in the machine state") Signed-off-by: Graeme Gregory <graeme@nuviainc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200821083853.356490-1-graeme@nuviainc.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* qom: Put name parameter before value / visitor parameterMarkus Armbruster2020-07-101-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
* qdev: Convert bus-less devices to qdev_realize() with CoccinelleMarkus Armbruster2020-06-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All remaining conversions to qdev_realize() are for bus-less devices. Coccinelle script: // only correct for bus-less @dev! @@ expression errp; expression dev; @@ - qdev_init_nofail(dev); + qdev_realize(dev, NULL, &error_fatal); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression errp; expression dev; symbol true; @@ - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize(DEVICE(dev), NULL, errp); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression errp; expression dev; symbol true; @@ - object_property_set_bool(dev, true, "realized", errp); + qdev_realize(DEVICE(dev), NULL, errp); Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-57-armbru@redhat.com>
* sysbus: Convert to sysbus_realize() etc. with CoccinelleMarkus Armbruster2020-06-151-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert from qdev_realize(), qdev_realize_and_unref() with null @bus argument to sysbus_realize(), sysbus_realize_and_unref(). Coccinelle script: @@ expression dev, errp; @@ - qdev_realize(DEVICE(dev), NULL, errp); + sysbus_realize(SYS_BUS_DEVICE(dev), errp); @@ expression sysbus_dev, dev, errp; @@ + sysbus_dev = SYS_BUS_DEVICE(dev); - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); - sysbus_dev = SYS_BUS_DEVICE(dev); @@ expression sysbus_dev, dev, errp; expression expr; @@ sysbus_dev = SYS_BUS_DEVICE(dev); ... when != dev = expr; - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(DEVICE(dev), NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); Whitespace changes minimized manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-46-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
* qdev: Convert uses of qdev_create() manuallyMarkus Armbruster2020-06-151-2/+2
| | | | | | | | | | Same transformation as in the previous commit. Manual, because convincing Coccinelle to transform these cases is somewhere between not worthwhile and infeasible (at least for me). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-11-armbru@redhat.com>
* qdev: Convert uses of qdev_create() with CoccinelleMarkus Armbruster2020-06-151-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the transformation explained in the commit before previous. Takes care of just one pattern that needs conversion. More to come in this series. Coccinelle script: @ depends on !(file in "hw/arm/highbank.c")@ expression bus, type_name, dev, expr; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr; identifier DOWN; @@ - dev = DOWN(qdev_create(bus, type_name)); + dev = DOWN(qdev_new(type_name)); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal); @@ expression bus, type_name, expr; identifier dev; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr, errp; symbol true; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); @@ expression bus, type_name, expr, errp; identifier dev; symbol true; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); The first rule exempts hw/arm/highbank.c, because it matches along two control flow paths there, with different @type_name. Covered by the next commit's manual conversions. Missing #include "qapi/error.h" added manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-10-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
* hw: Use QEMU_IS_ALIGNED() on parallel flash block sizePhilippe Mathieu-Daudé2020-05-181-1/+1
| | | | | | | | | | | | Use the QEMU_IS_ALIGNED() macro to verify the flash block size is properly aligned. It is quicker to process when reviewing. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200511205246.24621-1-philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qom: Drop parameter @errp of object_property_add() & friendsMarkus Armbruster2020-05-151-3/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
* hw/arm: Use TYPE_PL011 to create serial portGavin Shan2020-02-281-1/+2
| | | | | | | | | | | This uses TYPE_PL011 when creating the serial port so that the code looks cleaner. Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200224222223.4128-1-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* arm/sbsa-ref: use memdev for RAMIgor Mammedov2020-02-191-4/+3Star
| | | | | | | | | | | | | | | memory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing MachineClass::default_ram_id and using MachineState::ram instead of manually initializing RAM memory region. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200219160953.13771-31-imammedo@redhat.com>
* numa: properly check if numa is supportedIgor Mammedov2019-12-191-1/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | Commit aa57020774b, by mistake used MachineClass::numa_mem_supported to check if NUMA is supported by machine and also as unrelated change set it to true for sbsa-ref board. Luckily change didn't break machines that support NUMA, as the field is set to true for them. But the field is not intended for checking if NUMA is supported and will be flipped to false within this release for new machine types. Fix it: - by using previously used condition !mc->cpu_index_to_instance_props || !mc->get_default_cpu_node_id the first time and then use MachineState::numa_state down the road to check if NUMA is supported - dropping stray sbsa-ref chunk Fixes: aa57020774b690a22be72453b8e91c9b5a68c516 Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1576154936-178362-3-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* hw/arm/sbsa-ref: Simplify by moving the gic in the machine statePhilippe Mathieu-Daudé2019-12-161-44/+42Star
| | | | | | | | | | | Make the gic a field in the machine state, and instead of filling an array of qemu_irq and passing it around, directly call qdev_get_gpio_in() on the gic field. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20191206162303.30338-1-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* numa: move numa global variable numa_info into MachineStateTao Xu2019-09-031-1/+2
| | | | | | | | | | | Move existing numa global numa_info (renamed as "nodes") into NumaState. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20190809065731.9097-5-tao3.xu@intel.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* numa: move numa global variable have_numa_distance into MachineStateTao Xu2019-09-031-1/+1
| | | | | | | | | | | | Move existing numa global have_numa_distance into NumaState. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Liu Jingqi <jingqi.liu@intel.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20190809065731.9097-4-tao3.xu@intel.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* numa: move numa global variable nb_numa_nodes into MachineStateTao Xu2019-09-031-1/+3
| | | | | | | | | | | | | | Add struct NumaState in MachineState and move existing numa global nb_numa_nodes(renamed as "num_nodes") into NumaState. And add variable numa_support into MachineClass to decide which submachines support NUMA. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20190809065731.9097-3-tao3.xu@intel.com> [ehabkost: include hw/boards.h again to fix build failures] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* hw/arm: simplify arm_load_dtbTao Xu2019-09-031-2/+1Star
| | | | | | | | | | | | | | | | | | | In struct arm_boot_info, kernel_filename, initrd_filename and kernel_cmdline are copied from from MachineState. This patch add MachineState as a parameter into arm_load_dtb() and move the copy chunk of kernel_filename, initrd_filename and kernel_cmdline into arm_load_kernel(). Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Liu Jingqi <jingqi.liu@intel.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20190809065731.9097-2-tao3.xu@intel.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Cédric Le Goater <clg@kaod.org> [ehabkost: include hw/boards.h again to fix build failures] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* sysemu: Split sysemu/runstate.h off sysemu/sysemu.hMarkus Armbruster2019-08-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | sysemu/sysemu.h is a rather unfocused dumping ground for stuff related to the system-emulator. Evidence: * It's included widely: in my "build everything" tree, changing sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h, down from 5400 due to the previous two commits). * It pulls in more than a dozen additional headers. Split stuff related to run state management into its own header sysemu/runstate.h. Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400 to 4200. Touching new sysemu/runstate.h recompiles some 500 objects. Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also add qemu/main-loop.h. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-30-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> [Unbreak OS-X build]
* Include hw/qdev-properties.h lessMarkus Armbruster2019-08-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
* hw/arm/sbsa-ref: Remove unnecessary check for secure_sysmem == NULLPeter Maydell2019-07-081-6/+2Star
| | | | | | | | | | | | | | | | | | | | | | In the virt machine, we support TrustZone being either present or absent, and so the code must deal with the secure_sysmem pointer possibly being NULL. In the sbsa-ref machine, TrustZone is always present, but some code and comments copied from virt still treat it as possibly not being present. This causes Coverity to complain (CID 1407287) that we check secure_sysmem for being NULL after an unconditional dereference. Simplify the code so that instead of initializing the variable to NULL, unconditionally assigning it, and then testing it for NULL, we just initialize it correctly in the variable declaration and then assume it to be non-NULL. We also delete a comment which only applied to the non-TrustZone config. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190704142004.7150-1-peter.maydell@linaro.org Tested-by: Radosław Biernacki <radoslaw.biernacki@linaro.org> Reviewed-by: Radosław Biernacki <radoslaw.biernacki@linaro.org>
* hw/arm: Replace global smp variables with machine smp propertiesLike Xu2019-07-051-0/+4
| | | | | | | | | | | | | | | The global smp variables in arm are replaced with smp machine properties. The init_cpus() and *_create_rpu() are refactored to pass MachineState. A local variable of the same name would be introduced in the declaration phase if it's used widely in the context OR replace it on the spot if it's only used once. No semantic changes. Signed-off-by: Like Xu <like.xu@linux.intel.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190518205428.90532-9-like.xu@linux.intel.com> [ehabkost: Fix hw/arm/sbsa-ref.c and hw/arm/aspeed.c] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* hw/arm: Add arm SBSA reference machine, devices partHongbo Zhang2019-07-011-0/+535
| | | | | | | | | | Following the previous patch, this patch adds peripheral devices to the newly introduced SBSA-ref machine. Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org> Message-id: 1561890034-15921-3-git-send-email-hongbo.zhang@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm: Add arm SBSA reference machine, skeleton partHongbo Zhang2019-07-011-0/+271
For AArch64, the existing "virt" machine is primarily meant to run on KVM and execute virtualization workloads, but we need an environment as faithful as possible to physical hardware, for supporting firmware and OS development for physical Aarch64 machines. This patch introduces new machine type 'sbsa-ref' with main features: - Based on 'virt' machine type. - A new memory map. - CPU type cortex-a57. - EL2 and EL3 are enabled. - GIC version 3. - System bus AHCI controller. - System bus EHCI controller. - CDROM and hard disc on AHCI bus. - E1000E ethernet card on PCIE bus. - VGA display adaptor on PCIE bus. - No virtio devices. - No fw_cfg device. - No ACPI table supplied. - Only minimal device tree nodes. Arm Trusted Firmware and UEFI porting to this are done accordingly, and the firmware should supply ACPI tables to the guest OS. The minimal device tree nodes supplied by QEMU for this platform are only to pass the dynamic info reflecting command line input to firmware, not for loading the guest OS. To make the review easier, this task is split into two patches, the fundamental skeleton part and the peripheral devices part; this patch is the first part. Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org> Message-id: 1561890034-15921-2-git-send-email-hongbo.zhang@linaro.org [PMM: commit message tweaks; moved some bits between patch 1 and 2 to ensure patch 1 builds cleanly; removed unneeded lines from Kconfig stanza; only provide board for qemu-system-aarch64, not qemu-system-arm; added MAINTAINERS entry] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>