summaryrefslogtreecommitdiffstats
path: root/hw/char/bcm2835_aux.c
Commit message (Collapse)AuthorAgeFilesLines
* hw/char/bcm2835_aux: Allow less than 32-bit accessesPhilippe Mathieu-Daudé2020-10-081-1/+3
| | | | | | | | | | | | | | | | | | | | | | | The "BCM2835 ARM Peripherals" datasheet [*] chapter 2 ("Auxiliaries: UART1 & SPI1, SPI2"), list the register sizes as 3/8/16/32 bits. We assume this means this peripheral allows 8-bit accesses. This was not an issue until commit 5d971f9e67 which reverted ("memory: accept mismatching sizes in memory_region_access_valid"). The model is implemented as 32-bit accesses (see commit 97398d900c, all registers are 32-bit) so replace MemoryRegionOps.valid as MemoryRegionOps.impl, and re-introduce MemoryRegionOps.valid with a 8/32-bit range. [*] https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdf Fixes: 97398d900c ("bcm2835_aux: add emulation of BCM2835 AUX (aka UART1) block") Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201002181032.1899463-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* qdev: set properties with device_class_set_props()Marc-André Lureau2020-01-241-1/+1
| | | | | | | | | | | | | | | | | | | | | The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* hw/arm/bcm2835_peripherals: Improve loggingPhilippe Mathieu-Daudé2019-10-151-2/+3
| | | | | | | | | | | | | | Various logging improvements as once: - Use 0x prefix for hex numbers - Display value written during write accesses - Move some logs from GUEST_ERROR to UNIMP Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Cleber Rosa <crosa@redhat.com> Message-id: 20190926173428.10713-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Include hw/qdev-properties.h lessMarkus Armbruster2019-08-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
* Include migration/vmstate.h lessMarkus Armbruster2019-08-161-0/+1
| | | | | | | | | | | | | | | | | | In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary. Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* Include hw/irq.h a lot lessMarkus Armbruster2019-08-161-0/+1
| | | | | | | | | | | | | | | | | | | In my "build everything" tree, changing hw/irq.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get qemu_irq and.or qemu_irq_handler. Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to qemu/typedefs.h, and then include hw/irq.h only where it's still needed. Touching it now recompiles only some 500 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-13-armbru@redhat.com>
* Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster2019-06-121-0/+1
| | | | | | | | | Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
* bcm2835_aux: Swap RX and TX interrupt assignmentsGuenter Roeck2018-07-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RX and TX interrupt bits were reversed, resulting in an endless sequence of serial interupts in the emulated system and the following repeated error message when booting Linux. serial8250: too much work for irq61 This results in a boot failure most of the time. Qemu command line used to reproduce the problem: qemu-system-aarch64 -M raspi3 -m 1024 \ -kernel arch/arm64/boot/Image \ --append "rdinit=/sbin/init console=ttyS1,115200" -initrd rootfs.cpio \ -dtb arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dtb \ -nographic -monitor null -serial null -serial stdio This is with arm64:defconfig. The root file system was generated using buildroot. NB that this error likely arises from an erratum in the BCM2835 datasheet where the TX and RX bits were swapped in the AU_MU_IER_REG description (but correct for IIR): https://elinux.org/BCM2835_datasheet_errata#p12 Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 1529355846-25102-1-git-send-email-linux@roeck-us.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: added NB about datasheet] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* char: add backend hotswap handlerAnton Nefedov2017-07-141-1/+1
| | | | | | | | | | | Frontends should have an interface to setup the handler of a backend change. The interface will be used in the next commits Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1499342940-56739-3-git-send-email-anton.nefedov@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* char: remove explicit_fe_open, use a set_handlers argumentMarc-André Lureau2016-10-241-1/+1
| | | | | | | | | No need to keep explicit_fe_open around if it affects only a qemu_chr_fe_set_handlers(). Use an additional argument instead. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-24-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* char: make some qemu_chr_fe skip if no driverMarc-André Lureau2016-10-241-12/+6Star
| | | | | | | | | | In most cases, front ends do not care about the side effect of CharBackend, so we can simply skip the checks and call the qemu_chr_fe functions even without associated CharDriver. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* char: use qemu_chr_fe* functions with CharBackend argumentMarc-André Lureau2016-10-241-4/+4
| | | | | | | | | | | This also switches from qemu_chr_add_handlers() to qemu_chr_fe_set_handlers(). Note that qemu_chr_fe_set_handlers() now takes the focus when fe_open (qemu_chr_add_handlers() did take the focus) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-16-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* char: rename some frontend functionsMarc-André Lureau2016-10-241-1/+1
| | | | | | | | | qemu_chr_accept_input() and qemu_chr_disconnect() are only used by frontend, so use qemu_chr_fe prefix. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-14-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* char: replace PROP_CHR with CharBackendMarc-André Lureau2016-10-241-6/+6
| | | | | | | | | | | Store the property in a CharBackend instead of CharDriverState*. This also replace systematically chr by chr.chr to access the CharDriverState*. The following patches will replace it with calls to qemu_chr_fe CharBackend functions. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-12-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* hw: replace most use of qemu_chr_fe_write with qemu_chr_fe_write_allDaniel P. Berrange2016-09-131-1/+3
| | | | | | | | | | | | | | | | | | | | | | | The qemu_chr_fe_write method will return -1 on EAGAIN if the chardev backend write would block. Almost no callers of the qemu_chr_fe_write() method check the return value, instead blindly assuming data was successfully sent. In most cases this will lead to silent data loss on interactive consoles, but in some cases (eg RNG EGD) it'll just cause corruption of the protocol being spoken. We unfortunately can't fix the virtio-console code, due to a bug in the Linux guest drivers, which would cause the entire Linux kernel to hang if we delay processing of the incoming data in any way. Fixing this requires first fixing the guest driver to not hold spinlocks while writing to the hvc device backend. Fixes bug: https://bugs.launchpad.net/qemu/+bug/1586756 Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1473170165-540-4-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* hw: explicitly include qemu/log.hPaolo Bonzini2016-05-191-0/+1
| | | | | | Move the inclusion out of hw/hw.h, most files do not need it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* bcm2835_aux: add emulation of BCM2835 AUX (aka UART1) blockAndrew Baumann2016-03-161-0/+316
At present only the core UART functions (data path for tx/rx) are implemented, which is enough for UEFI to boot. The following features/registers are unimplemented: * Line/modem control * Scratch register * Extra control * Baudrate * SPI interfaces Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1457467526-8840-3-git-send-email-Andrew.Baumann@microsoft.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-12-22 16:56:21 +0100