summaryrefslogtreecommitdiffstats
path: root/hw/core
Commit message (Collapse)AuthorAgeFilesLines
* hw/core/resettable: add support for changing parentDamien Hedde2020-01-302-2/+61
| | | | | | | | | | | | | | | | | | | | | | | | Add a function resettable_change_parent() to do the required plumbing when changing the parent a of Resettable object. We need to make sure that the reset state of the object remains coherent with the reset state of the new parent. We make the 2 following hypothesis: + when an object is put in a parent under reset, the object goes in reset. + when an object is removed from a parent under reset, the object leaves reset. The added function avoids any glitch if both old and new parent are already in reset. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-6-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/core: add Resettable support to BusClass and DeviceClassDamien Hedde2020-01-302-0/+190
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support of Resettable interface to buses and devices: + ResettableState structure is added in the Bus/Device state + Resettable methods are implemented. + device/bus_is_in_reset function defined This commit allows to transition the objects to the new multi-phase interface without changing the reset behavior at all. Object single reset method can be split into the 3 different phases but the 3 phases are still executed in a row for a given object. From the qdev/qbus reset api point of view, nothing is changed. qdev_reset_all() and qbus_reset_all() are not modified as well as device_legacy_reset(). Transition of an object must be done from parent class to child class. Care has been taken to allow the transition of a parent class without requiring the child classes to be transitioned at the same time. Note that SysBus and SysBusDevice class do not need any transition because they do not override the legacy reset method. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-5-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/core: create Resettable QOM interfaceDamien Hedde2020-01-303-0/+256
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit defines an interface allowing multi-phase reset. This aims to solve a problem of the actual single-phase reset (built in DeviceClass and BusClass): reset behavior is dependent on the order in which reset handlers are called. In particular doing external side-effect (like setting an qemu_irq) is problematic because receiving object may not be reset yet. The Resettable interface divides the reset in 3 well defined phases. To reset an object tree, all 1st phases are executed then all 2nd then all 3rd. See the comments in include/hw/resettable.h for a more complete description. The interface defines 3 phases to let the future possibility of holding an object into reset for some time. The qdev/qbus reset in DeviceClass and BusClass will be modified in following commits to use this interface. A mechanism is provided to allow executing a transitional reset handler in place of the 2nd phase which is executed in children-then-parent order inside a tree. This will allow to transition devices and buses smoothly while keeping the exact current qdev/qbus reset behavior for now. Documentation will be added in a following commit. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-4-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/core/qdev: add trace events to help with resettable transitionDamien Hedde2020-01-302-3/+35
| | | | | | | | | | | | | Adds trace events to reset procedure and when updating the parent bus of a device. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-3-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* add device_legacy_reset function to prepare for reset api changeDamien Hedde2020-01-301-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | Provide a temporary device_legacy_reset function doing what device_reset does to prepare for the transition with Resettable API. All occurrence of device_reset in the code tree are also replaced by device_legacy_reset. The new resettable API has different prototype and semantics (resetting child buses as well as the specified device). Subsequent commits will make the changeover for each call site individually; once that is complete device_legacy_reset() will be removed. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-2-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/core/or-irq: Fix incorrect assert forbidding num-lines == MAX_OR_LINESPeter Maydell2020-01-301-1/+1
| | | | | | | | | | | | | | | | | | | The num-lines property of the TYPE_OR_GATE device sets the number of input lines it has. An assert() in or_irq_realize() restricts this to the maximum supported by the implementation. However we got the condition in the assert wrong: it should be using <=, because num-lines == MAX_OR_LINES is permitted, and means that all entries from 0 to MAX_OR_LINES-1 in the s->levels[] array are used. We didn't notice this previously because no user has so far needed that many input lines. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200120142235.10432-1-peter.maydell@linaro.org
* hw/core/loader: Let load_elf() populate a field with CPU-specific flagsAleksandar Markovic2020-01-292-19/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While loading the executable, some platforms (like AVR) need to detect CPU type that executable is built for - and, with this patch, this is enabled by reading the field 'e_flags' of the ELF header of the executable in question. The change expands functionality of the following functions: - load_elf() - load_elf_as() - load_elf_ram() - load_elf_ram_sym() The argument added to these functions is called 'pflags' and is of type 'uint32_t*' (that matches 'pointer to 'elf_word'', 'elf_word' being the type of the field 'e_flags', in both 32-bit and 64-bit variants of ELF header). Callers are allowed to pass NULL as that argument, and in such case no lookup to the field 'e_flags' will happen, and no information will be returned, of course. CC: Richard Henderson <rth@twiddle.net> CC: Peter Maydell <peter.maydell@linaro.org> CC: Edgar E. Iglesias <edgar.iglesias@gmail.com> CC: Michael Walle <michael@walle.cc> CC: Thomas Huth <huth@tuxfamily.org> CC: Laurent Vivier <laurent@vivier.eu> CC: Philippe Mathieu-Daudé <f4bug@amsat.org> CC: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> CC: Aurelien Jarno <aurelien@aurel32.net> CC: Jia Liu <proljc@gmail.com> CC: David Gibson <david@gibson.dropbear.id.au> CC: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> CC: BALATON Zoltan <balaton@eik.bme.hu> CC: Christian Borntraeger <borntraeger@de.ibm.com> CC: Thomas Huth <thuth@redhat.com> CC: Artyom Tarasenko <atar4qemu@gmail.com> CC: Fabien Chouteau <chouteau@adacore.com> CC: KONRAD Frederic <frederic.konrad@adacore.com> CC: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> Signed-off-by: Michael Rolnik <mrolnik@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <1580079311-20447-24-git-send-email-aleksandar.markovic@rt-rk.com>
* qdev: register properties as class propertiesMarc-André Lureau2020-01-242-58/+63
| | | | | | | | | | | | | | | | | | | Use class properties facilities to add properties to the class during device_class_set_props(). qdev_property_add_static() must be adapted as PropertyInfo now operates with classes (and not instances), so we must set_default_value() on the ObjectProperty, before calling its init() method on the object instance. Also, PropertyInfo.create() is now exclusively used for class properties. Fortunately, qdev_property_add_static() is only used in target/arm/cpu.c so far, which doesn't use "link" properties (that require create()). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-22-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qdev: move instance properties to class propertiesMarc-André Lureau2020-01-241-11/+13
| | | | | | Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-21-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qdev: rename DeviceClass.propsPaolo Bonzini2020-01-242-5/+5
| | | | | | Ensure that conflicts in the future will cause a syntax error. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qdev: set properties with device_class_set_props()Marc-André Lureau2020-01-246-5/+10
| | | | | | | | | | | | | | | | | | | | | The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qdev: move helper function to monitor/miscMarc-André Lureau2020-01-241-26/+0Star
| | | | | | | | | Move the one-user function to the place it is being used. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200110153039.1379601-5-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qdev: remove extraneous errorMarc-André Lureau2020-01-241-11/+4Star
| | | | | | | | | All callers use error_abort, and even the function itself calls with error_abort. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-4-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qdev: remove duplicated qdev_property_add_static() docMarc-André Lureau2020-01-241-10/+0Star
| | | | | | | | The function is already documented in the header. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-3-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* hw/core/Makefile: Group generic objects versus system-mode objectsPhilippe Mathieu-Daudé2020-01-241-14/+14
| | | | | | | | | | | | To ease review/modifications of this Makefile, group generic objects first, then system-mode specific ones, and finally peripherals (which are only used in system-mode). No logical changes introduced here. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200118140619.26333-7-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* hw/core: Restrict reset handlers API to system-modePhilippe Mathieu-Daudé2020-01-241-1/+2
| | | | | | | | | | | The user-mode code does not use this API, restrict it to the system-mode. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20200118140619.26333-6-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* cpu: Introduce cpu_class_set_parent_reset()Greg Kurz2020-01-241-0/+8
| | | | | | | | | | | | | | Similarly to what we already do with qdev, use a helper to overload the reset QOM methods of the parent in children classes, for clarity. Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <157650847239.354886.2782881118916307978.stgit@bahia.lan> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* migration: Define VMSTATE_INSTANCE_ID_ANYPeter Xu2020-01-201-1/+2
| | | | | | | | | | | Define the new macro VMSTATE_INSTANCE_ID_ANY for callers who wants to auto-generate the vmstate instance ID. Previously it was hard coded as -1 instead of this macro. It helps to change this default value in the follow up patches. No functional change. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
* usb-redir: remove 'remote wakeup' flag from configuration descriptorYuri Benditovich2020-01-131-0/+1
| | | | | | | | | | | | | | | | If the redirected device has this capability, Windows guest may place the device into D2 and expect it to wake when the device becomes active, but this will never happen. For example, when internal Bluetooth adapter is redirected, keyboards and mice connected to it do not work. Current commit removes this capability (starting from machine 5.0) Set 'usb-redir.suppress-remote-wake' property to 'off' to keep 'remote wake' as is or to 'on' to remove 'remote wake' on 4.2 or earlier. Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Message-id: 20200108091044.18055-3-yuri.benditovich@daynix.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* usb-host: remove 'remote wakeup' flag from configuration descriptorYuri Benditovich2020-01-131-0/+1
| | | | | | | | | | | | | | | | If the redirected device has this capability, Windows guest may place the device into D2 and expect it to wake when the device becomes active, but this will never happen. For example, when internal Bluetooth adapter is redirected, keyboards and mice connected to it do not work. Current commit removes this capability (starting from machine 5.0) Set 'usb-host.suppress-remote-wake' property to 'off' to keep 'remote wake' as is or to 'on' to remove 'remote wake' on 4.2 or earlier. Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Message-id: 20200108091044.18055-2-yuri.benditovich@daynix.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* Merge remote-tracking branch 'remotes/elmarco/tags/prop-ptr-pull-request' ↵Peter Maydell2020-01-073-63/+2Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into staging Clean-ups: qom-ify serial and remove QDEV_PROP_PTR Hi, QDEV_PROP_PTR is marked in multiple places as "FIXME/TODO/remove me". In most cases, it can be easily replaced with QDEV_PROP_LINK when the pointer points to an Object. There are a few places where such substitution isn't possible. For those places, it seems reasonable to use a specific setter method instead, and keep the user_creatable = false. In other places, proper usage of qdev or other facilies is the solution. The serial code wasn't converted to qdev, which makes it a bit more archaic to deal with. Let's convert it first, so we can more easily embed it from other devices, and re-export some properties and drop QDEV_PROP_PTR usage. # gpg: Signature made Tue 07 Jan 2020 15:01:26 GMT # gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5 # gpg: issuer "marcandre.lureau@redhat.com" # gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full] # gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full] # Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5 * remotes/elmarco/tags/prop-ptr-pull-request: (37 commits) qdev/qom: remove some TODO limitations now that PROP_PTR is gone qdev: remove QDEV_PROP_PTR qdev: remove PROP_MEMORY_REGION omap-gpio: remove PROP_PTR omap-i2c: remove PROP_PTR omap-intc: remove PROP_PTR smbus-eeprom: remove PROP_PTR cris: improve passing PIC interrupt vector to the CPU mips/cps: fix setting saar property qdev: use g_strcmp0() instead of open-coding it leon3: use qdev gpio facilities for the PIL leon3: use qemu_irq framework instead of callback as property dp8393x: replace PROP_PTR with PROP_LINK etraxfs: remove PROP_PTR usage lance: replace PROP_PTR with PROP_LINK vmmouse: replace PROP_PTR with PROP_LINK sm501: make SerialMM a child, export chardev property mips: use sysbus_mmio_get_region() instead of internal fields mips: use sysbus_add_io() mips: baudbase is 115200 by default ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * qdev/qom: remove some TODO limitations now that PROP_PTR is goneMarc-André Lureau2020-01-071-8/+0Star
| | | | | | | | | | Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
| * qdev: remove QDEV_PROP_PTRMarc-André Lureau2020-01-071-18/+0Star
| | | | | | | | | | | | | | | | No longer used in the tree. The comment about user_creatable is still quite relevant, but there is already a similar comment in qdev-core.h. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
| * qdev: use g_strcmp0() instead of open-coding itMarc-André Lureau2020-01-071-5/+2Star
| | | | | | | | | | | | | | Minor code simplification. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
| * sysbus: remove unused sysbus_try_create*Marc-André Lureau2020-01-071-32/+0Star
| | | | | | | | | | | | Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
* | Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell2020-01-072-0/+365
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | virtio, pci, pc: fixes, features Bugfixes all over the place. HMAT support. New flags for vhost-user-blk utility. Auto-tuning of seg max for virtio storage. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon 06 Jan 2020 17:05:05 GMT # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (32 commits) intel_iommu: add present bit check for pasid table entries intel_iommu: a fix to vtd_find_as_from_bus_num() virtio-net: delete also control queue when TX/RX deleted virtio: reset region cache when on queue deletion virtio-mmio: update queue size on guest write tests: add virtio-scsi and virtio-blk seg_max_adjust test virtio: make seg_max virtqueue size dependent hw: fix using 4.2 compat in 5.0 machine types for i440fx/q35 vhost-user-scsi: reset the device if supported vhost-user: add VHOST_USER_RESET_DEVICE to reset devices hw/pci/pci_host: Let pci_data_[read/write] use unsigned 'size' argument hw/pci/pci_host: Remove redundant PCI_DPRINTF() virtio-mmio: Clear v2 transport state on soft reset ACPI: add expected files for HMAT tests (acpihmat) tests/bios-tables-test: add test cases for ACPI HMAT tests/numa: Add case for QMP build HMAT hmat acpi: Build Memory Side Cache Information Structure(s) hmat acpi: Build System Locality Latency and Bandwidth Information Structure(s) hmat acpi: Build Memory Proximity Domain Attributes Structure(s) numa: Extend CLI to provide memory side cache information ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * virtio: make seg_max virtqueue size dependentDenis Plotnikov2020-01-061-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before the patch, seg_max parameter was immutable and hardcoded to 126 (128 - 2) without respect to queue size. This has two negative effects: 1. when queue size is < 128, we have Virtio 1.1 specfication violation: (2.6.5.3.1 Driver Requirements) seq_max must be <= queue_size. This violation affects the old Linux guests (ver < 4.14). These guests crash on these queue_size setups. 2. when queue_size > 128, as was pointed out by Denis Lunev <den@virtuozzo.com>, seg_max restrics guest's block request length which affects guests' performance making them issues more block request than needed. https://lists.gnu.org/archive/html/qemu-devel/2017-12/msg03721.html To mitigate this two effects, the patch adds the property adjusting seg_max to queue size automaticaly. Since seg_max is a guest visible parameter, the property is machine type managable and allows to choose between old (seg_max = 126 always) and new (seg_max = queue_size - 2) behaviors. Not to change the behavior of the older VMs, prevent setting the default seg_max_adjust value for older machine types. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> Message-Id: <20191220140905.1718-2-dplotnikov@virtuozzo.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * numa: Extend CLI to provide memory side cache informationLiu Jingqi2020-01-051-0/+80
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add -numa hmat-cache option to provide Memory Side Cache Information. These memory attributes help to build Memory Side Cache Information Structure(s) in ACPI Heterogeneous Memory Attribute Table (HMAT). Before using hmat-cache option, enable HMAT with -machine hmat=on. Acked-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Liu Jingqi <jingqi.liu@intel.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20191213011929.2520-4-tao3.xu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
| * numa: Extend CLI to provide memory latency and bandwidth informationLiu Jingqi2020-01-051-0/+194
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add -numa hmat-lb option to provide System Locality Latency and Bandwidth Information. These memory attributes help to build System Locality Latency and Bandwidth Information Structure(s) in ACPI Heterogeneous Memory Attribute Table (HMAT). Before using hmat-lb option, enable HMAT with -machine hmat=on. Acked-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Liu Jingqi <jingqi.liu@intel.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20191213011929.2520-3-tao3.xu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
| * numa: Extend CLI to provide initiator information for numa nodesTao Xu2020-01-052-0/+87
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In ACPI 6.3 chapter 5.2.27 Heterogeneous Memory Attribute Table (HMAT), The initiator represents processor which access to memory. And in 5.2.27.3 Memory Proximity Domain Attributes Structure, the attached initiator is defined as where the memory controller responsible for a memory proximity domain. With attached initiator information, the topology of heterogeneous memory can be described. Add new machine property 'hmat' to enable all HMAT specific options. Extend CLI of "-numa node" option to indicate the initiator numa node-id. In the linux kernel, the codes in drivers/acpi/hmat/hmat.c parse and report the platform's HMAT tables. Before using initiator option, enable HMAT with -machine hmat=on. Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Jingqi Liu <jingqi.liu@intel.com> Suggested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20191213011929.2520-2-tao3.xu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * virtio-pci: disable vring processing when bus-mastering is disabledMichael Roth2020-01-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the SLOF firmware for pseries guests will disable/re-enable a PCI device multiple times via IO/MEM/MASTER bits of PCI_COMMAND register after the initial probe/feature negotiation, as it tends to work with a single device at a time at various stages like probing and running block/network bootloaders without doing a full reset in-between. In QEMU, when PCI_COMMAND_MASTER is disabled we disable the corresponding IOMMU memory region, so DMA accesses (including to vring fields like idx/flags) will no longer undergo the necessary translation. Normally we wouldn't expect this to happen since it would be misbehavior on the driver side to continue driving DMA requests. However, in the case of pseries, with iommu_platform=on, we trigger the following sequence when tearing down the virtio-blk dataplane ioeventfd in response to the guest unsetting PCI_COMMAND_MASTER: #2 0x0000555555922651 in virtqueue_map_desc (vdev=vdev@entry=0x555556dbcfb0, p_num_sg=p_num_sg@entry=0x7fffe657e1a8, addr=addr@entry=0x7fffe657e240, iov=iov@entry=0x7fffe6580240, max_num_sg=max_num_sg@entry=1024, is_write=is_write@entry=false, pa=0, sz=0) at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:757 #3 0x0000555555922a89 in virtqueue_pop (vq=vq@entry=0x555556dc8660, sz=sz@entry=184) at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:950 #4 0x00005555558d3eca in virtio_blk_get_request (vq=0x555556dc8660, s=0x555556dbcfb0) at /home/mdroth/w/qemu.git/hw/block/virtio-blk.c:255 #5 0x00005555558d3eca in virtio_blk_handle_vq (s=0x555556dbcfb0, vq=0x555556dc8660) at /home/mdroth/w/qemu.git/hw/block/virtio-blk.c:776 #6 0x000055555591dd66 in virtio_queue_notify_aio_vq (vq=vq@entry=0x555556dc8660) at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:1550 #7 0x000055555591ecef in virtio_queue_notify_aio_vq (vq=0x555556dc8660) at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:1546 #8 0x000055555591ecef in virtio_queue_host_notifier_aio_poll (opaque=0x555556dc86c8) at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:2527 #9 0x0000555555d02164 in run_poll_handlers_once (ctx=ctx@entry=0x55555688bfc0, timeout=timeout@entry=0x7fffe65844a8) at /home/mdroth/w/qemu.git/util/aio-posix.c:520 #10 0x0000555555d02d1b in try_poll_mode (timeout=0x7fffe65844a8, ctx=0x55555688bfc0) at /home/mdroth/w/qemu.git/util/aio-posix.c:607 #11 0x0000555555d02d1b in aio_poll (ctx=ctx@entry=0x55555688bfc0, blocking=blocking@entry=true) at /home/mdroth/w/qemu.git/util/aio-posix.c:639 #12 0x0000555555d0004d in aio_wait_bh_oneshot (ctx=0x55555688bfc0, cb=cb@entry=0x5555558d5130 <virtio_blk_data_plane_stop_bh>, opaque=opaque@entry=0x555556de86f0) at /home/mdroth/w/qemu.git/util/aio-wait.c:71 #13 0x00005555558d59bf in virtio_blk_data_plane_stop (vdev=<optimized out>) at /home/mdroth/w/qemu.git/hw/block/dataplane/virtio-blk.c:288 #14 0x0000555555b906a1 in virtio_bus_stop_ioeventfd (bus=bus@entry=0x555556dbcf38) at /home/mdroth/w/qemu.git/hw/virtio/virtio-bus.c:245 #15 0x0000555555b90dbb in virtio_bus_stop_ioeventfd (bus=bus@entry=0x555556dbcf38) at /home/mdroth/w/qemu.git/hw/virtio/virtio-bus.c:237 #16 0x0000555555b92a8e in virtio_pci_stop_ioeventfd (proxy=0x555556db4e40) at /home/mdroth/w/qemu.git/hw/virtio/virtio-pci.c:292 #17 0x0000555555b92a8e in virtio_write_config (pci_dev=0x555556db4e40, address=<optimized out>, val=1048832, len=<optimized out>) at /home/mdroth/w/qemu.git/hw/virtio/virtio-pci.c:613 I.e. the calling code is only scheduling a one-shot BH for virtio_blk_data_plane_stop_bh, but somehow we end up trying to process an additional virtqueue entry before we get there. This is likely due to the following check in virtio_queue_host_notifier_aio_poll: static bool virtio_queue_host_notifier_aio_poll(void *opaque) { EventNotifier *n = opaque; VirtQueue *vq = container_of(n, VirtQueue, host_notifier); bool progress; if (!vq->vring.desc || virtio_queue_empty(vq)) { return false; } progress = virtio_queue_notify_aio_vq(vq); namely the call to virtio_queue_empty(). In this case, since no new requests have actually been issued, shadow_avail_idx == last_avail_idx, so we actually try to access the vring via vring_avail_idx() to get the latest non-shadowed idx: int virtio_queue_empty(VirtQueue *vq) { bool empty; ... if (vq->shadow_avail_idx != vq->last_avail_idx) { return 0; } rcu_read_lock(); empty = vring_avail_idx(vq) == vq->last_avail_idx; rcu_read_unlock(); return empty; but since the IOMMU region has been disabled we get a bogus value (0 usually), which causes virtio_queue_empty() to falsely report that there are entries to be processed, which causes errors such as: "virtio: zero sized buffers are not allowed" or "virtio-blk missing headers" and puts the device in an error state. This patch works around the issue by introducing virtio_set_disabled(), which sets a 'disabled' flag to bypass checks like virtio_queue_empty() when bus-mastering is disabled. Since we'd check this flag at all the same sites as vdev->broken, we replace those checks with an inline function which checks for either vdev->broken or vdev->disabled. The 'disabled' flag is only migrated when set, which should be fairly rare, but to maintain migration compatibility we disable it's use for older machine types. Users requiring the use of the flag in conjunction with older machine types can set it explicitly as a virtio-device option. NOTES: - This leaves some other oddities in play, like the fact that DRIVER_OK also gets unset in response to bus-mastering being disabled, but not restored (however the device seems to continue working) - Similarly, we disable the host notifier via virtio_bus_stop_ioeventfd(), which seems to move the handling out of virtio-blk dataplane and back into the main IO thread, and it ends up staying there till a reset (but otherwise continues working normally) Cc: David Gibson <david@gibson.dropbear.id.au>, Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Message-Id: <20191120005003.27035-1-mdroth@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* | Merge remote-tracking branch ↵Peter Maydell2020-01-063-3/+42
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/elmarco/tags/dbus-vmstate7-pull-request' into staging Add dbus-vmstate Hi, With external processes or helpers participating to the VM support, it becomes necessary to handle their migration. Various options exist to transfer their state: 1) as the VM memory, RAM or devices (we could say that's how vhost-user devices can be handled today, they are expected to restore from ring state) 2) other "vmstate" (as with TPM emulator state blobs) 3) left to be handled by management layer 1) is not practical, since an external processes may legitimatelly need arbitrary state date to back a device or a service, or may not even have an associated device. 2) needs ad-hoc code for each helper, but is simple and working 3) is complicated for management layer, QEMU has the migration timing The proposed "dbus-vmstate" object will connect to a given D-Bus address, and save/load from org.qemu.VMState1 owners on migration. Thus helpers can easily have their state migrated with QEMU, without implementing ad-hoc support (such as done for TPM emulation) D-Bus is ubiquitous on Linux (it is systemd IPC), and can be made to work on various other OSes. There are several implementations and good bindings for various languages. (the tests/dbus-vmstate-test.c is a good example of how simple the implementation of services can be, even in C) dbus-vmstate is put into use by the libvirt series "[PATCH 00/23] Use a slirp helper process". v2: - fix build with broken mingw-glib # gpg: Signature made Mon 06 Jan 2020 14:43:35 GMT # gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5 # gpg: issuer "marcandre.lureau@redhat.com" # gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full] # gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full] # Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5 * remotes/elmarco/tags/dbus-vmstate7-pull-request: tests: add dbus-vmstate-test tests: add migration-helpers unit dockerfiles: add dbus-daemon to some of latest distributions configure: add GDBUS_CODEGEN Add dbus-vmstate object util: add dbus helper unit docs: start a document to describe D-Bus usage vmstate: replace DeviceState with VMStateIf vmstate: add qom interface to get id Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | vmstate: replace DeviceState with VMStateIfMarc-André Lureau2020-01-061-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | Replace DeviceState dependency with VMStateIf on vmstate API. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Acked-by: Halil Pasic <pasic@linux.ibm.com>
| * | vmstate: add qom interface to get idMarc-André Lureau2020-01-063-0/+38
| |/ | | | | | | | | | | | | | | | | Add an interface to get the instance id, instead of depending on Device and qdev_get_dev_path(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
* | Merge remote-tracking branch ↵Peter Maydell2020-01-062-8/+3Star
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging x86 and machine queue, 2019-12-20 Bug fix: * Resolve CPU models to v1 by default (Eduardo Habkost) Cleanup: * Remove incorrect numa_mem_supported checks (Igor Mammedov) # gpg: Signature made Fri 20 Dec 2019 19:19:02 GMT # gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6 # gpg: issuer "ehabkost@redhat.com" # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/x86-and-machine-pull-request: numa: properly check if numa is supported numa: remove not needed check i386: Resolve CPU models to v1 by default Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * numa: properly check if numa is supportedIgor Mammedov2019-12-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit aa57020774b, by mistake used MachineClass::numa_mem_supported to check if NUMA is supported by machine and also as unrelated change set it to true for sbsa-ref board. Luckily change didn't break machines that support NUMA, as the field is set to true for them. But the field is not intended for checking if NUMA is supported and will be flipped to false within this release for new machine types. Fix it: - by using previously used condition !mc->cpu_index_to_instance_props || !mc->get_default_cpu_node_id the first time and then use MachineState::numa_state down the road to check if NUMA is supported - dropping stray sbsa-ref chunk Fixes: aa57020774b690a22be72453b8e91c9b5a68c516 Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1576154936-178362-3-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
| * numa: remove not needed checkIgor Mammedov2019-12-191-6/+1Star
| | | | | | | | | | | | | | | | | | | | Currently parse_numa_node() is always called from already numa enabled context. Drop unnecessary check if numa is supported. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1576154936-178362-2-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* | Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell2019-12-201-141/+0Star
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * More uses of RCU_READ_LOCK_GUARD (Dave, myself) * QOM doc improvments (Greg) * Cleanups from the Meson conversion (Marc-André) * Support for multiple -accel options (myself) * Many x86 machine cleanup (Philippe, myself) * tests/migration-test cleanup (Juan) * PC machine removal and next round of deprecation (Thomas) * kernel-doc integration (Peter, myself) # gpg: Signature made Wed 18 Dec 2019 01:35:02 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (87 commits) vga: cleanup mapping of VRAM for non-PCI VGA hw/display: Remove "rombar" hack from vga-pci and vmware_vga hw/pci: Remove the "command_serr_enable" property hw/audio: Remove the "use_broken_id" hack from the AC97 device hw/i386: Remove the deprecated machines 0.12 up to 0.15 hw/pci-host: Add Kconfig entry to select the IGD Passthrough Host Bridge hw/pci-host/i440fx: Extract the IGD passthrough host bridge device hw/pci-host/i440fx: Use definitions instead of magic values hw/pci-host/i440fx: Use size_t to iterate over ARRAY_SIZE() hw/pci-host/i440fx: Extract PCII440FXState to "hw/pci-host/i440fx.h" hw/pci-host/i440fx: Correct the header description Fix some comment spelling errors. target/i386: remove unused pci-assign codes WHPX: refactor load library migration: check length directly to make sure the range is aligned memory: include MemoryListener documentation and some missing function parameters docs: add memory API reference memory.h: Silence kernel-doc complaints docs: Create bitops.rst as example of kernel-docs bitops.h: Silence kernel-doc complaints ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | kvm: convert "-machine kernel_irqchip" to an accelerator propertyPaolo Bonzini2019-12-171-61/+0Star
| | | | | | | | | | | | Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
| * | kvm: convert "-machine kvm_shadow_mem" to an accelerator propertyPaolo Bonzini2019-12-171-39/+0Star
| | | | | | | | | | | | Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
| * | xen: convert "-machine igd-passthru" to an accelerator propertyPaolo Bonzini2019-12-171-20/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The first machine property to fall is Xen's Intel integrated graphics passthrough. The "-machine igd-passthru" option does not set anymore a property on the machine object, but desugars to a GlobalProperty on accelerator objects. The setter is very simple, since the value ends up in a global variable, so this patch also provides an example before the more complicated cases that follow it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
| * | vl: configure accelerators from -accel optionsPaolo Bonzini2019-12-171-21/+0Star
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Drop the "accel" property from MachineState, and instead desugar "-machine accel=" to a list of "-accel" options. This has a semantic change due to removing merge_lists from -accel. For example: - "-accel kvm -accel tcg" all but ignored "-accel kvm". This is a bugfix. - "-accel kvm -accel thread=single" ignored "thread=single", since it applied the option to KVM. Now it fails due to not specifying the accelerator on "-accel thread=single". - "-accel tcg -accel thread=single" chose single-threaded TCG, while now it will fail due to not specifying the accelerator on "-accel thread=single". Also, "-machine accel" and "-accel" become incompatible. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* | hw/core/qdev: cleanup Error ** variablesVladimir Sementsov-Ogievskiy2019-12-181-15/+13Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename Error ** parameter in check_only_migratable to common errp. In device_set_realized: - Move "if (local_err != NULL)" closer to error setters. - Drop 'Error **local_errp': it doesn't save any LoCs, but it's very unusual. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20191205174635.18758-10-vsementsov@virtuozzo.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
* | hmp: drop Error pointer indirection in hmp_handle_errorVladimir Sementsov-Ogievskiy2019-12-181-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | We don't need Error **, as all callers pass local Error object, which isn't used after the call. Use Error * instead. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20191205174635.18758-5-vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
* | hw/core: Fix fit_load_fdt() error API violationsMarkus Armbruster2019-12-181-7/+8
|/ | | | | | | | | | | | | | | | | | | fit_load_fdt() passes @errp to fit_image_addr(), then recovers from ENOENT failures. Passing @errp is wrong, because it works only as long as @errp is neither @error_fatal nor @error_abort. Error recovery dereferences @errp. That's also wrong; see the big comment in error.h. Error recovery can leave *errp pointing to a freed Error object. Wrong, it must be null on success. Messed up in commit 3eb99edb48 "loader-fit: Wean off error_printf()". No caller actually passes such values, or uses *errp on success. Fix anyway: splice in a local Error *err, and error_propagate(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20191204093625.14836-8-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
* virtio-blk: advertise F_WCE (F_FLUSH) if F_CONFIG_WCE is advertisedEvgeny Yakovlev2019-12-131-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | Virtio spec 1.1 (and earlier), 5.2.5.2 Driver Requirements: Device Initialization: "Devices SHOULD always offer VIRTIO_BLK_F_FLUSH, and MUST offer it if they offer VIRTIO_BLK_F_CONFIG_WCE" Currently F_CONFIG_WCE and F_WCE are not connected to each other. Qemu will advertise F_CONFIG_WCE if config-wce argument is set for virtio-blk device. And F_WCE is advertised only if underlying block backend actually has it's caching enabled. Fix this by advertising F_WCE if F_CONFIG_WCE is also advertised. To preserve backwards compatibility with newer machine types make this behaviour governed by "x-enable-wce-if-config-wce" virtio-blk-device property and introduce hw_compat_4_2 with new property being off by default for all machine types <= 4.2 (but don't introduce 4.3 machine type itself yet). Signed-off-by: Evgeny Yakovlev <wrfsh@yandex-team.ru> Message-Id: <1572978137-189218-1-git-send-email-wrfsh@yandex-team.ru> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* numa: Add missing \n to error messageGreg Kurz2019-11-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | If memory allocation fails when using -mem-path, QEMU is supposed to print out a message to indicate that fallback to anonymous RAM is deprecated. This is done with error_printf() which does output buffering. As a consequence, the message is only printed at the next flush, eg. when quiting QEMU, and it also lacks a trailing newline: qemu-system-ppc64: unable to map backing store for guest RAM: Cannot allocate memory qemu-system-ppc64: warning: falling back to regular RAM allocation QEMU 4.1.50 monitor - type 'help' for more information (qemu) q This is deprecated. Make sure that -mem-path specified path has sufficient resources to allocate -m specified RAM amountgreg@boss02:~/Work/qemu/qemu-spapr$ Add the missing \n to fix both issues. Fixes: cb79224b7e4b "deprecate -mem-path fallback to anonymous RAM" Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <157304440026.351774.14607704217028190097.stgit@bahia.lan> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* ptimer: Remove old ptimer_init_with_bh() APIPeter Maydell2019-11-111-76/+15Star
| | | | | | | | | | | | | | | | Now all the users of ptimers have converted to the transaction-based API, we can remove ptimer_init_with_bh() and all the code paths that are used only by bottom-half based ptimers, and tidy up the documentation comments to consider the transaction-based API the only possibility. The code changes result from: * s->bh no longer exists * s->callback is now always non-NULL Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191025142411.17085-1-peter.maydell@linaro.org
* Revert "irq: introduce qemu_irq_proxy()"Philippe Mathieu-Daudé2019-11-051-14/+0Star
| | | | | | | | | | | This function isn't used anymore. This reverts commit 22ec3283efba9ba0792790da786d6776d83f2a92. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Esteban Bosse <estebanbosse@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
* Merge remote-tracking branch ↵Peter Maydell2019-10-301-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/stsquad/tags/pull-tcg-plugins-281019-4' into staging TCG Plugins initial implementation - use --enable-plugins @ configure - low impact introspection (-plugin empty.so to measure overhead) - plugins cannot alter guest state - example plugins included in source tree (tests/plugins) - -d plugin to enable plugin output in logs - check-tcg runs extra tests when plugins enabled - documentation in docs/devel/plugins.rst # gpg: Signature made Mon 28 Oct 2019 15:13:23 GMT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-tcg-plugins-281019-4: (57 commits) travis.yml: enable linux-gcc-debug-tcg cache MAINTAINERS: add me for the TCG plugins code scripts/checkpatch.pl: don't complain about (foo, /* empty */) .travis.yml: add --enable-plugins tests include/exec: wrap cpu_ldst.h in CONFIG_TCG accel/stubs: reduce headers from tcg-stub tests/plugin: add hotpages to analyse memory access patterns tests/plugin: add instruction execution breakdown tests/plugin: add a hotblocks plugin tests/tcg: enable plugin testing tests/tcg: drop test-i386-fprem from TESTS when not SLOW tests/tcg: move "virtual" tests to EXTRA_TESTS tests/tcg: set QEMU_OPTS for all cris runs tests/tcg/Makefile.target: fix path to config-host.mak tests/plugin: add sample plugins linux-user: support -plugin option vl: support -plugin option plugin: add qemu_plugin_outs helper plugin: add qemu_plugin_insn_disas helper plugin: expand the plugin_init function to include an info block ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2025-04-27 07:29:32 +0200