summaryrefslogtreecommitdiffstats
path: root/hw/i386
Commit message (Collapse)AuthorAgeFilesLines
...
* microvm: wire up hotplugGerd Hoffmann2020-09-171-0/+42
| | | | | | | | | | | | | The cpu hotplug code handles the initialization of coldplugged cpus too, so it is needed even in case cpu hotplug is not supported. Wire cpu hotplug up for microvm. Without this we get a broken MADT table. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20200915120909.20838-17-kraxel@redhat.com
* x86: move cpu hotplug from pc to x86Gerd Hoffmann2020-09-172-276/+276
| | | | | | | | | | | | | | | The cpu hotplug code handles the initialization of coldplugged cpus too, so it is needed even in case cpu hotplug is not supported. Move the code from pc to x86, so microvm can use it. Move both plug and unplug to keep everything in one place, even though microvm needs plug only. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20200915120909.20838-16-kraxel@redhat.com
* x86: move acpi_dev from pc/microvmGerd Hoffmann2020-09-176-24/+31
| | | | | | | | | | Both pc and microvm machine types have a acpi_dev field. Move it to the common base type. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20200915120909.20838-15-kraxel@redhat.com
* x86: constify x86_machine_is_*_enabledGerd Hoffmann2020-09-171-2/+2
| | | | | | | | Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200915120909.20838-14-kraxel@redhat.com
* microvm/acpi: disable virtio-mmio cmdline hackGerd Hoffmann2020-09-171-1/+2
| | | | | | | | | ... in case we are using ACPI. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20200915120909.20838-13-kraxel@redhat.com
* microvm/acpi: use seabios with acpi=onGerd Hoffmann2020-09-171-1/+4
| | | | | | | | | With acpi=off continue to use qboot. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20200915120909.20838-12-kraxel@redhat.com
* microvm/acpi: use GSI 16-23 for virtioGerd Hoffmann2020-09-171-1/+1
| | | | | | | | | | | | With ACPI enabled and IO-APIC being properly declared in the ACPI tables we can use interrupt lines 16-23 for virtio and avoid shared interrupts. With acpi disabled we continue to use lines 5-12. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20200915120909.20838-11-kraxel@redhat.com
* microvm/acpi: add acpi_dsdt_add_virtio() for x86Gerd Hoffmann2020-09-171-0/+52
| | | | | | | | | Makes x86 linux kernel find virtio-mmio devices automatically. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20200915120909.20838-10-kraxel@redhat.com
* microvm/acpi: add minimal acpi supportGerd Hoffmann2020-09-175-1/+237
| | | | | | | | $subject says all. Can be controlled using -M microvm,acpi=on/off. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20200915120909.20838-9-kraxel@redhat.com
* microvm: make virtio irq base runtime configurableGerd Hoffmann2020-09-171-4/+7
| | | | | | | Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20200915120909.20838-8-kraxel@redhat.com
* acpi: ged: add x86 device variant.Gerd Hoffmann2020-09-172-0/+37
| | | | | | | | | Set AcpiDeviceIfClass->madt_cpu, otherwise identical to TYPE_ACPI_GED. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20200915120909.20838-6-kraxel@redhat.com
* microvm: name qboot binary qboot.romGerd Hoffmann2020-09-171-2/+2
| | | | | | | | | qboot isn't a bios and shouldnt be named that way. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200915120909.20838-2-kraxel@redhat.com
* Merge remote-tracking branch ↵Peter Maydell2020-09-121-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/stsquad/tags/pull-testing-fixes-100920-1' into staging Various misc and testing fixes: - Expand CODING_STYLE.rst a little more - usb-host build fix - allow check-softfloat unit tests without TCG - simplify mips imm_branch so compiler isn't confused - mark ppc64abi32 for deprecation - more compiler soothing in pch_rev_id - allow acceptance to skip missing binaries - more a bunch of plugins to contrib # gpg: Signature made Thu 10 Sep 2020 10:51:05 BST # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-testing-fixes-100920-1: plugins: move the more involved plugins to contrib tests/acceptance: Add Test.fetch_asset(cancel_on_missing=True) tests: bump avocado version hw/i386: make explicit clearing of pch_rev_id configure: don't enable ppc64abi32-linux-user by default docs/system/deprecated: mark ppc64abi32-linux-user for deprecation target/mips: simplify gen_compute_imm_branch logic tests/meson.build: fp tests don't need CONFIG_TCG usb-host: restrict workaround to new libusb versions CODING_STYLE.rst: flesh out our naming conventions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * hw/i386: make explicit clearing of pch_rev_idAlex Bennée2020-09-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | Some compilers (notably the Xenial gcc in Travis) fail to spot that this will always be set if pch_dev_id != 0xffff. Given this is setup code and using _Pragma to override is equally as ugly lets just remove the doubt from the compilers mind. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200909112742.25730-8-alex.bennee@linaro.org>
* | Use DECLARE_*CHECKER* macrosEduardo Habkost2020-09-0910-20/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* | Move QOM typedefs and add missing includesEduardo Habkost2020-09-0910-23/+43
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* Revert "hw/i386: Update structures to save the number of nodes per package"Babu Moger2020-09-022-2/+0Star
| | | | | | | | | | | | This reverts commit c24a41bb53c0854d22c96b30d57cfcaa543c409d. Remove the EPYC specific apicid decoding and use the generic default decoding. Signed-off-by: Babu Moger <babu.moger@amd.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <159889937478.21294.4192291354416942986.stgit@naples-babu.amd.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* Revert "hw/i386: Introduce apicid functions inside X86MachineState"Babu Moger2020-09-021-5/+0Star
| | | | | | | | | | | | This reverts commit 6121c7fbfd98dbc3af1b00b56ff2eef66df87828. Remove the EPYC specific apicid decoding and use the generic default decoding. Signed-off-by: Babu Moger <babu.moger@amd.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <159889935648.21294.8095493980805969544.stgit@naples-babu.amd.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* Revert "hw/i386: Move arch_id decode inside x86_cpus_init"Babu Moger2020-09-022-33/+10Star
| | | | | | | | | | | | This reverts commit 2e26f4ab3bf8390a2677d3afd9b1a04f015d7721. Remove the EPYC specific apicid decoding and use the generic default decoding. Signed-off-by: Babu Moger <babu.moger@amd.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <159889934379.21294.15323080164340490855.stgit@naples-babu.amd.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* Revert "i386: Fix pkg_id offset for EPYC cpu models"Babu Moger2020-09-021-1/+0Star
| | | | | | | | | | | | | | This reverts commit 7b225762c8c05fd31d4c2be116aedfbc00383f8b. Remove the EPYC specific apicid decoding and use the generic default decoding. Also fix all the references of pkg_offset. Signed-off-by: Babu Moger <babu.moger@amd.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <159889933119.21294.8112825730577505757.stgit@naples-babu.amd.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* x86-iommu: Rename QOM type macrosEduardo Habkost2020-09-023-3/+3
| | | | | | | | | | | | | Some QOM macros were using a X86_IOMMU_DEVICE prefix, and others were using a X86_IOMMU prefix. Rename all of them to use the same X86_IOMMU_DEVICE prefix. This will make future conversion to OBJECT_DECLARE* easier. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20200825192110.3528606-47-ehabkost@redhat.com> Acked-by: Peter Xu <peterx@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* hw/i386/kvm/ioapic.c: fix typo in error messageKenta Ishiguro2020-09-011-1/+1
| | | | | | | | | | | | | Fix a typo in an error message for KVM_SET_IRQCHIP ioctl: "KVM_GET_IRQCHIP" should be "KVM_SET_IRQCHIP". Fixes: a39c1d47ac ("kvm: x86: Add user space part for in-kernel IOAPIC") Signed-off-by: Kenta Ishiguro <kentaishiguro@slowstart.org> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Message-Id: <20200717123514.15406-1-kentaishiguro@slowstart.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* hw: Remove superfluous breaksLiao Pingfang2020-09-011-1/+0Star
| | | | | | | | | | | Remove superfluous breaks, as there is a "return" before them. Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn> Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <1594631126-36631-1-git-send-email-wang.yi59@zte.com.cn> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* Merge remote-tracking branch ↵Peter Maydell2020-08-281-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/ehabkost/tags/machine-next-pull-request' into staging Machine queue + QOM fixes and cleanups Bug fix: * numa: hmat: fix cache size check (Igor Mammedov) QOM fixes and cleanups: * Move QOM macros and typedefs to header files * Use TYPE_* constants on TypeInfo structs * Rename QOM type checking macros for consistency * Rename enum values and typedefs that conflict with QOM type checking amcros * Fix typos on QOM type checking macros * Delete unused QOM type checking macros that use non-existing typedefs * hvf: Add missing include * xen-legacy-backend: Add missing typedef XenLegacyDevice # gpg: Signature made Thu 27 Aug 2020 20:20:05 BST # gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6 # gpg: issuer "ehabkost@redhat.com" # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/machine-next-pull-request: (53 commits) dc390: Use TYPE_DC390_DEVICE constant ppce500: Use TYPE_PPC_E500_PCI_BRIDGE constant tosa: Use TYPE_TOSA_MISC_GPIO constant xlnx-zcu102: Use TYPE_ZCU102_MACHINE constant sclpconsole: Use TYPE_* constants amd_iommu: Use TYPE_AMD_IOMMU_PCI constant nios2_iic: Use TYPE_ALTERA_IIC constant etsec: Use TYPE_ETSEC_COMMON constant migration: Rename class type checking macros swim: Rename struct SWIM to Swim s390-virtio-ccw: Rename S390_MACHINE_CLASS macro nubus: Rename class type checking macros vfio/pci: Move QOM macros to header kvm: Move QOM macros to kvm.h mptsas: Move QOM macros to header pxa2xx: Move QOM macros to header rocker: Move QOM macros to header auxbus: Move QOM macros to header piix: Move QOM macros to header virtio-serial-bus: Move QOM macros to header ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * amd_iommu: Use TYPE_AMD_IOMMU_PCI constantEduardo Habkost2020-08-271-1/+1
| | | | | | | | | | | | | | | | | | | | This will make future conversion to use OBJECT_DECLARE* easier. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20200826184334.4120620-4-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* | i386/acpi: fix inconsistent QEMU/OVMF device pathsMichael S. Tsirkin2020-08-271-2/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | macOS uses ACPI UIDs to build the DevicePath for NVRAM boot options, while OVMF firmware gets them via an internal channel through QEMU. Due to a bug in QEMU ACPI currently UEFI firmware and ACPI have different values, and this makes the underlying operating system unable to report its boot option. The particular node in question is the primary PciRoot (PCI0 in ACPI), which for some reason gets assigned 1 in ACPI UID and 0 in the DevicePath. This is due to the _UID assigned to it by build_dsdt in hw/i386/acpi-build.c Which does not correspond to the primary PCI identifier given by pcibus_num in hw/pci/pci.c Reference with the device paths, OVMF startup logs, and ACPI table dumps (SysReport): https://github.com/acidanthera/bugtracker/issues/1050 In UEFI v2.8, section "10.4.2 Rules with ACPI _HID and _UID" ends with the paragraph, Root PCI bridges will use the plug and play ID of PNP0A03, This will be stored in the ACPI Device Path _HID field, or in the Expanded ACPI Device Path _CID field to match the ACPI name space. The _UID in the ACPI Device Path structure must match the _UID in the ACPI name space. (See especially the last sentence.) Considering *extra* root bridges / root buses (with bus number > 0), QEMU's ACPI generator actually does the right thing; since QEMU commit c96d9286a6d7 ("i386/acpi-build: more traditional _UID and _HID for PXB root buses", 2015-06-11). However, the _UID values for root bridge zero (on both i440fx and q35) have always been "wrong" (from UEFI perspective), going back in QEMU to commit 74523b850189 ("i386: add ACPI table files from seabios", 2013-10-14). Even in SeaBIOS, these _UID values have always been 1; see commit a4d357638c57 ("Port rombios32 code from bochs-bios.", 2008-03-08) for i440fx, and commit ecbe3fd61511 ("seabios: q35: add dsdt", 2012-12-01) for q35. Cc: qemu-stable@nongnu.org Suggested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Vitaly Cheptsov <vit9696@protonmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
* Merge remote-tracking branch ↵Peter Maydell2020-08-223-2/+28
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/ehabkost/tags/machine-next-pull-request' into staging Machine queue 2020-08-19 Regular post-release changes: * hw: add compat machines for 5.2 (Cornelia Huck) Features: * qmp: Expose MachineClass::default_ram_id (Michal Privoznik) Cleanups: * qdev: Document qdev_prop_set_drive_err() return value (Philippe Mathieu-Daudé) # gpg: Signature made Wed 19 Aug 2020 16:21:55 BST # gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6 # gpg: issuer "ehabkost@redhat.com" # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/machine-next-pull-request: hw: add compat machines for 5.2 qmp: Expose MachineClass::default_ram_id qdev: Document qdev_prop_set_drive_err() return value Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * hw: add compat machines for 5.2Cornelia Huck2020-08-193-2/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add 5.2 machine types for arm/i440fx/q35/s390x/spapr. Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200819144016.281156-1-cohuck@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* | meson: convert hw/arch*Marc-André Lureau2020-08-216-26/+47
| | | | | | | | | | | | | | | | Each architecture's sourceset is placed in an hw_arch dictionary, and picked up from there when building the per-emulator static_library. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* | meson: infrastructure for building emulatorsPaolo Bonzini2020-08-214-4/+4
| | | | | | | | | | Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* | trace: switch position of headers to what Meson requiresPaolo Bonzini2020-08-212-0/+2
|/ | | | | | | | | | | | | | | | | Meson doesn't enjoy the same flexibility we have with Make in choosing the include path. In particular the tracing headers are using $(build_root)/$(<D). In order to keep the include directives unchanged, the simplest solution is to generate headers with patterns like "trace/trace-audio.h" and place forwarding headers in the source tree such that for example "audio/trace.h" includes "trace/trace-audio.h". This patch is too ugly to be applied to the Makefiles now. It's only a way to separate the changes to the tracing header files from the Meson rewrite of the tracing logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* hw/pci-host: save/restore pci host config registerHogan Wang2020-07-271-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pci host config register is used to save PCI address for read/write config data. If guest writes a value to config register, and then QEMU pauses the vcpu to migrate, after the migration, the guest will continue to write pci config data, and the write data will be ignored because of new qemu process losing the config register state. To trigger the bug: 1. guest is booting in seabios. 2. guest enables the SMRAM in seabios:piix4_apmc_smm_setup, and then expects to disable the SMRAM by pci_config_writeb. 3. after guest writes the pci host config register, QEMU pauses vcpu to finish migration. 4. guest write of config data(0x0A) fails to disable the SMRAM because the config register state is lost. 5. guest continues to boot and crashes in ipxe option ROM due to SMRAM in enabled state. Example Reproducer: step 1. Make modifications to seabios and qemu for increase reproduction efficiency, write 0xf0 to 0x402 port notify qemu to stop vcpu after 0x0cf8 port wrote i440 configure register. qemu stop vcpu when catch 0x402 port wrote 0xf0. seabios:/src/hw/pci.c @@ -52,6 +52,11 @@ void pci_config_writeb(u16 bdf, u32 addr, u8 val) writeb(mmconfig_addr(bdf, addr), val); } else { outl(ioconfig_cmd(bdf, addr), PORT_PCI_CMD); + if (bdf == 0 && addr == 0x72 && val == 0xa) { + dprintf(1, "stop vcpu\n"); + outb(0xf0, 0x402); // notify qemu to stop vcpu + dprintf(1, "resume vcpu\n"); + } outb(val, PORT_PCI_DATA + (addr & 3)); } } qemu:hw/char/debugcon.c @@ -60,6 +61,9 @@ static void debugcon_ioport_write(void *opaque, hwaddr addr, uint64_t val, printf(" [debugcon: write addr=0x%04" HWADDR_PRIx " val=0x%02" PRIx64 "]\n", addr, val); #endif + if (ch == 0xf0) { + vm_stop(RUN_STATE_PAUSED); + } /* XXX this blocks entire thread. Rewrite to use * qemu_chr_fe_write and background I/O callbacks */ qemu_chr_fe_write_all(&s->chr, &ch, 1); step 2. start vm1 by the following command line, and then vm stopped. $ qemu-system-x86_64 -machine pc-i440fx-5.0,accel=kvm\ -netdev tap,ifname=tap-test,id=hostnet0,vhost=on,downscript=no,script=no\ -device virtio-net-pci,netdev=hostnet0,id=net0,bus=pci.0,addr=0x13,bootindex=3\ -device cirrus-vga,id=video0,vgamem_mb=16,bus=pci.0,addr=0x2\ -chardev file,id=seabios,path=/var/log/test.seabios,append=on\ -device isa-debugcon,iobase=0x402,chardev=seabios\ -monitor stdio step 3. start vm2 to accept vm1 state. $ qemu-system-x86_64 -machine pc-i440fx-5.0,accel=kvm\ -netdev tap,ifname=tap-test1,id=hostnet0,vhost=on,downscript=no,script=no\ -device virtio-net-pci,netdev=hostnet0,id=net0,bus=pci.0,addr=0x13,bootindex=3\ -device cirrus-vga,id=video0,vgamem_mb=16,bus=pci.0,addr=0x2\ -chardev file,id=seabios,path=/var/log/test.seabios,append=on\ -device isa-debugcon,iobase=0x402,chardev=seabios\ -monitor stdio \ -incoming tcp:127.0.0.1:8000 step 4. execute the following qmp command in vm1 to migrate. (qemu) migrate tcp:127.0.0.1:8000 step 5. execute the following qmp command in vm2 to resume vcpu. (qemu) cont Before this patch, we get KVM "emulation failure" error on vm2. This patch fixes it. Cc: qemu-stable@nongnu.org Signed-off-by: Hogan Wang <hogan.wang@huawei.com> Message-Id: <20200727084621.3279-1-hogan.wang@huawei.com> Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* error: Strip trailing '\n' from error string arguments (again)Markus Armbruster2020-07-241-3/+3
| | | | | | | | | | | | Tracked down with scripts/coccinelle/err-bad-newline.cocci. Cc: Peter Xu <peterx@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200722084048.1726105-3-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Peter Xu <peterx@redhat.com>
* intel_iommu: Use correct shift for 256 bits qi descriptorLiu Yi L2020-07-222-2/+8
| | | | | | | | | | | | | | | | | | In chapter 10.4.23 of VT-d spec 3.0, Descriptor Width bit was introduced in VTD_IQA_REG. Software could set this bit to tell VT-d the QI descriptor from software would be 256 bits. Accordingly, the VTD_IQH_QH_SHIFT should be 5 when descriptor size is 256 bits. This patch adds the DW bit check when deciding the shift used to update VTD_IQH_REG. Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Message-Id: <1593850035-35483-1-git-send-email-yi.l.liu@intel.com> Reviewed-by: Peter Xu <peterx@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell2020-07-111-0/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Make checkpatch say 'qemu' instead of 'kernel' (Aleksandar) * Fix PSE guests with emulated NPT (Alexander B. #1) * Fix leak (Alexander B. #2) * HVF fixes (Roman, Cameron) * New Sapphire Rapids CPUID bits (Cathy) * cpus.c and softmmu/ cleanups (Claudio) * TAP driver tweaks (Daniel, Havard) * object-add bugfix and testcases (Eric A.) * Fix Coverity MIN_CONST and MAX_CONST (Eric B.) * "info lapic" improvement (Jan) * SSE fixes (Joseph) * "-msg guest-name" option (Mario) * support for AMD nested live migration (myself) * Small i386 TCG fixes (myself) * improved error reporting for Xen (myself) * fix "-cpu host -overcommit cpu-pm=on" (myself) * Add accel/Kconfig (Philippe) * iscsi sense handling fixes (Yongji) * Misc bugfixes # gpg: Signature made Sat 11 Jul 2020 00:33:41 BST # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (47 commits) linux-headers: update again to 5.8 apic: Report current_count via 'info lapic' scripts: improve message when TAP based tests fail target/i386: Enable TSX Suspend Load Address Tracking feature target/i386: Add SERIALIZE cpu feature softmmu/vl: Remove the check for colons in -accel parameters cpu-throttle: new module, extracted from cpus.c softmmu: move softmmu only files from root pc: fix leak in pc_system_flash_cleanup_unused cpus: Move CPU code from exec.c to cpus-common.c target/i386: Correct the warning message of Intel PT checkpatch: Change occurences of 'kernel' to 'qemu' in user messages iscsi: return -EIO when sense fields are meaningless iscsi: handle check condition status in retry loop target/i386: sev: fail query-sev-capabilities if QEMU cannot use SEV target/i386: sev: provide proper error reporting for query-sev-capabilities KVM: x86: believe what KVM says about WAITPKG target/i386: implement undocumented "smsw r32" behavior target/i386: remove gen_io_end Makefile: simplify MINIKCONF rules ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * pc: fix leak in pc_system_flash_cleanup_unusedAlexander Bulekov2020-07-111-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tries to fix a leak detected when building with --enable-sanitizers: ./i386-softmmu/qemu-system-i386 Upon exit: ==13576==ERROR: LeakSanitizer: detected memory leaks Direct leak of 1216 byte(s) in 1 object(s) allocated from: #0 0x7f9d2ed5c628 in malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5) #1 0x7f9d2e963500 in g_malloc (/usr/lib/x86_64-linux-gnu/libglib-2.0.so.) #2 0x55fa646d25cc in object_new_with_type /tmp/qemu/qom/object.c:686 #3 0x55fa63dbaa88 in qdev_new /tmp/qemu/hw/core/qdev.c:140 #4 0x55fa638a533f in pc_pflash_create /tmp/qemu/hw/i386/pc_sysfw.c:88 #5 0x55fa638a54c4 in pc_system_flash_create /tmp/qemu/hw/i386/pc_sysfw.c:106 #6 0x55fa646caa1d in object_init_with_type /tmp/qemu/qom/object.c:369 #7 0x55fa646d20b5 in object_initialize_with_type /tmp/qemu/qom/object.c:511 #8 0x55fa646d2606 in object_new_with_type /tmp/qemu/qom/object.c:687 #9 0x55fa639431e9 in qemu_init /tmp/qemu/softmmu/vl.c:3878 #10 0x55fa6335c1b8 in main /tmp/qemu/softmmu/main.c:48 #11 0x7f9d2cf06e0a in __libc_start_main ../csu/libc-start.c:308 #12 0x55fa6335f8e9 in _start (/tmp/qemu/build/i386-softmmu/qemu-system-i386) Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20200701145231.19531-1-alxndr@bu.edu> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* | Merge remote-tracking branch 'remotes/aperard/tags/pull-xen-20200710' into ↵Peter Maydell2020-07-112-4/+7
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | staging xen patches Fixes following harden checks in qdev. # gpg: Signature made Fri 10 Jul 2020 14:05:46 BST # gpg: using RSA key F80C006308E22CFD8A92E7980CF5572FD7FB55AF # gpg: issuer "anthony.perard@citrix.com" # gpg: Good signature from "Anthony PERARD <anthony.perard@gmail.com>" [marginal] # gpg: aka "Anthony PERARD <anthony.perard@citrix.com>" [marginal] # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 5379 2F71 024C 600F 778A 7161 D8D5 7199 DF83 42C8 # Subkey fingerprint: F80C 0063 08E2 2CFD 8A92 E798 0CF5 572F D7FB 55AF * remotes/aperard/tags/pull-xen-20200710: xen: cleanup unrealized flash devices xen: Fix xen-legacy-backend qdev types Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * xen: cleanup unrealized flash devicesPaul Durrant2020-07-102-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The generic pc_machine_initfn() calls pc_system_flash_create() which creates 'system.flash0' and 'system.flash1' devices. These devices are then realized by pc_system_flash_map() which is called from pc_system_firmware_init() which itself is called via pc_memory_init(). The latter however is not called when xen_enable() is true and hence the following assertion fails: qemu-system-i386: hw/core/qdev.c:439: qdev_assert_realized_properly: Assertion `dev->realized' failed These flash devices are unneeded when using Xen so this patch avoids the assertion by simply removing them using pc_system_flash_cleanup_unused(). Reported-by: Jason Andryuk <jandryuk@gmail.com> Fixes: ebc29e1beab0 ("pc: Support firmware configuration with -blockdev") Signed-off-by: Paul Durrant <pdurrant@amazon.com> Tested-by: Jason Andryuk <jandryuk@gmail.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200624121841.17971-3-paul@xen.org> Fixes: dfe8c79c4468 ("qdev: Assert onboard devices all get realized properly") Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
* | error: Eliminate error_propagate() manuallyMarkus Armbruster2020-07-101-4/+2Star
| | | | | | | | | | | | | | | | | | | | | | When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. The previous two commits did that for sufficiently simple cases with Coccinelle. Do it for several more manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-37-armbru@redhat.com>
* | error: Eliminate error_propagate() with Coccinelle, part 1Markus Armbruster2020-07-101-3/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
* | error: Avoid unnecessary error_propagate() after error_setg()Markus Armbruster2020-07-101-24/+11Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace error_setg(&err, ...); error_propagate(errp, err); by error_setg(errp, ...); Related pattern: if (...) { error_setg(&err, ...); goto out; } ... out: error_propagate(errp, err); return; When all paths to label out are that way, replace by if (...) { error_setg(errp, ...); return; } and delete the label along with the error_propagate(). When we have at most one other path that actually needs to propagate, and maybe one at the end that where propagation is unnecessary, e.g. foo(..., &err); if (err) { goto out; } ... bar(..., &err); out: error_propagate(errp, err); return; move the error_propagate() to where it's needed, like if (...) { foo(..., &err); error_propagate(errp, err); return; } ... bar(..., errp); return; and transform the error_setg() as above. In some places, the transformation results in obviously unnecessary error_propagate(). The next few commits will eliminate them. Bonus: the elimination of gotos will make later patches in this series easier to review. Candidates for conversion tracked down with this Coccinelle script: @@ identifier err, errp; expression list args; @@ - error_setg(&err, args); + error_setg(errp, args); ... when != err error_propagate(errp, err); Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-34-armbru@redhat.com>
* | qom: Use returned bool to check for failure, Coccinelle partMarkus Armbruster2020-07-101-2/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The previous commit enables conversion of foo(..., &err); if (err) { ... } to if (!foo(..., errp)) { ... } for QOM functions that now return true / false on success / error. Coccinelle script: @@ identifier fun = { object_apply_global_props, object_initialize_child_with_props, object_initialize_child_with_propsv, object_property_get, object_property_get_bool, object_property_parse, object_property_set, object_property_set_bool, object_property_set_int, object_property_set_link, object_property_set_qobject, object_property_set_str, object_property_set_uint, object_set_props, object_set_propv, user_creatable_add_dict, user_creatable_complete, user_creatable_del }; expression list args, args2; typedef Error; Error *err; @@ - fun(args, &err, args2); - if (err) + if (!fun(args, &err, args2)) { ... } Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Line breaks tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-29-armbru@redhat.com>
* | qom: Put name parameter before value / visitor parameterMarkus Armbruster2020-07-104-21/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
* | qapi: Use returned bool to check for failure, Coccinelle partMarkus Armbruster2020-07-101-2/+1Star
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The previous commit enables conversion of visit_foo(..., &err); if (err) { ... } to if (!visit_foo(..., errp)) { ... } for visitor functions that now return true / false on success / error. Coccinelle script: @@ identifier fun =~ "check_list|input_type_enum|lv_start_struct|lv_type_bool|lv_type_int64|lv_type_str|lv_type_uint64|output_type_enum|parse_type_bool|parse_type_int64|parse_type_null|parse_type_number|parse_type_size|parse_type_str|parse_type_uint64|print_type_bool|print_type_int64|print_type_null|print_type_number|print_type_size|print_type_str|print_type_uint64|qapi_clone_start_alternate|qapi_clone_start_list|qapi_clone_start_struct|qapi_clone_type_bool|qapi_clone_type_int64|qapi_clone_type_null|qapi_clone_type_number|qapi_clone_type_str|qapi_clone_type_uint64|qapi_dealloc_start_list|qapi_dealloc_start_struct|qapi_dealloc_type_anything|qapi_dealloc_type_bool|qapi_dealloc_type_int64|qapi_dealloc_type_null|qapi_dealloc_type_number|qapi_dealloc_type_str|qapi_dealloc_type_uint64|qobject_input_check_list|qobject_input_check_struct|qobject_input_start_alternate|qobject_input_start_list|qobject_input_start_struct|qobject_input_type_any|qobject_input_type_bool|qobject_input_type_bool_keyval|qobject_input_type_int64|qobject_input_type_int64_keyval|qobject_input_type_null|qobject_input_type_number|qobject_input_type_number_keyval|qobject_input_type_size_keyval|qobject_input_type_str|qobject_input_type_str_keyval|qobject_input_type_uint64|qobject_input_type_uint64_keyval|qobject_output_start_list|qobject_output_start_struct|qobject_output_type_any|qobject_output_type_bool|qobject_output_type_int64|qobject_output_type_null|qobject_output_type_number|qobject_output_type_str|qobject_output_type_uint64|start_list|visit_check_list|visit_check_struct|visit_start_alternate|visit_start_list|visit_start_struct|visit_type_.*"; expression list args; typedef Error; Error *err; @@ - fun(args, &err); - if (err) + if (!fun(args, &err)) { ... } A few line breaks tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-19-armbru@redhat.com>
* Merge remote-tracking branch ↵Peter Maydell2020-07-091-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/vivier2/tags/trivial-branch-for-5.1-pull-request' into staging trivial branch patches 20200707 # gpg: Signature made Tue 07 Jul 2020 11:52:06 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-5.1-pull-request: net/tap-solaris.c: Include qemu-common.h for TFR macro intel_iommu: "aw-bits" error message still refers to "x-aw-bits" util/qemu-option: Document the get_opt_value() function MAINTAINERS: Update Radoslaw Biernacki email address .mailmap: Update Alexander Graf email address trivial: Respect alphabetical order of .o files in Makefile.objs fix the prototype of muls64/mulu64 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * intel_iommu: "aw-bits" error message still refers to "x-aw-bits"Menno Lageman2020-07-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | Commit 4b49b586c4 ('intel_iommu: remove "x-" prefix for "aw-bits"') removed the "x-" prefix but but didn't update the error message accordingly. Signed-off-by: Menno Lageman <menno.lageman@oracle.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200625155258.1452425-1-menno.lageman@oracle.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* | Merge remote-tracking branch ↵Peter Maydell2020-07-083-10/+10
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/kraxel/tags/audio-20200706-pull-request' into staging audio: deprecate -soundhw # gpg: Signature made Mon 06 Jul 2020 20:29:07 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/audio-20200706-pull-request: audio: set default value for pcspk.iobase property pcspk: update docs/system/target-i386-desc.rst.inc audio: add soundhw deprecation notice audio: deprecate -soundhw pcspk audio: create pcspk device early audio: rework pcspk_init() softmmu: initialize spice and audio earlier pc_basic_device_init: drop no_vmport arg pc_basic_device_init: drop has_pit arg pc_basic_device_init: pass PCMachineState audio: deprecate -soundhw hda audio: deprecate -soundhw sb16 audio: deprecate -soundhw gus audio: deprecate -soundhw cs4231a audio: deprecate -soundhw adlib audio: deprecate -soundhw es1370 audio: deprecate -soundhw ac97 audio: add deprecated_register_soundhw stubs: add pci_create_simple stubs: add isa_create_simple Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | audio: deprecate -soundhw pcspkGerd Hoffmann2020-07-061-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add deprecation message to the audio init function. Factor out audio initialization and call that from both audio init and realize, so setting the audiodev property is enough to properly initialize pcspk. Add a property alias to the machine type to set the audio device, so pcspk can be initialized using: "-machine pcspk-audiodev=<name>" Using "-global isa-pcspk.audiodev=<name>" works too but is not recommended. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20200702132525.6849-18-kraxel@redhat.com
| * | audio: create pcspk device earlyGerd Hoffmann2020-07-061-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | Create the pcspk device early, so it exists at machine type initialization time. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20200702132525.6849-17-kraxel@redhat.com
| * | audio: rework pcspk_init()Gerd Hoffmann2020-07-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Instead of creating and returning the pc speaker accept it as argument. That allows to rework the initialization workflow in followup patches. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20200702132525.6849-16-kraxel@redhat.com
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-12-22 14:08:54 +0100