summaryrefslogtreecommitdiffstats
path: root/hw/pci/pci.c
Commit message (Collapse)AuthorAgeFilesLines
* pci: Display PCI IRQ pin in "info pci"Peter Xu2020-06-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | Sometimes it would be good to be able to read the pin number along with the IRQ number allocated. Since we'll dump the IRQ number, no reason to not dump the pin information. For example, the vfio-pci device will overwrite the pin with the hardware pin number. It would be nice to know the pin number of one assigned device from QMP/HMP. CC: Dr. David Alan Gilbert <dgilbert@redhat.com> CC: Alex Williamson <alex.williamson@redhat.com> CC: Michael S. Tsirkin <mst@redhat.com> CC: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> CC: Julia Suvorova <jusual@redhat.com> CC: Markus Armbruster <armbru@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20200317195908.283800-1-peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com>
* hw/pci: Fix crash when running QEMU with "-nic model=rocker"Thomas Huth2020-06-121-1/+12
| | | | | | | | | | | | | | | | | QEMU currently aborts when being started with "-nic model=rocker" or with "-net nic,model=rocker". This happens because the "rocker" device is not a normal NIC but a switch, which has different properties. Thus we should only consider real NIC devices for "-nic" and "-net". These devices can be identified by the "netdev" property, so check for this property before adding the device to the list. Reported-by: Michael Tokarev <mjt@tls.msk.ru> Fixes: 52310c3fa7dc854d ("net: allow using any PCI NICs in -net or -nic") Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20200527153152.9211-1-thuth@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* pci: assert configuration access is within boundsPrasad J Pandit2020-06-091-0/+4
| | | | | | | | | | | | | | | While accessing PCI configuration bytes, assert that 'address + len' is within PCI configuration space. Generally it is within bounds. This is more of a defensive assert, in case a buggy device was to send 'address' which may go out of bounds. Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org> Message-Id: <20200604113525.58898-1-ppandit@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* qdev: Unrealize must not failMarkus Armbruster2020-05-151-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Devices may have component devices and buses. Device realization may fail. Realization is recursive: a device's realize() method realizes its components, and device_set_realized() realizes its buses (which should in turn realize the devices on that bus, except bus_set_realized() doesn't implement that, yet). When realization of a component or bus fails, we need to roll back: unrealize everything we realized so far. If any of these unrealizes failed, the device would be left in an inconsistent state. Must not happen. device_set_realized() lets it happen: it ignores errors in the roll back code starting at label child_realize_fail. Since realization is recursive, unrealization must be recursive, too. But how could a partly failed unrealize be rolled back? We'd have to re-realize, which can fail. This design is fundamentally broken. device_set_realized() does not roll back at all. Instead, it keeps unrealizing, ignoring further errors. It can screw up even for a device with no buses: if the lone dc->unrealize() fails, it still unregisters vmstate, and calls listeners' unrealize() callback. bus_set_realized() does not roll back either. Instead, it stops unrealizing. Fortunately, no unrealize method can fail, as we'll see below. To fix the design error, drop parameter @errp from all the unrealize methods. Any unrealize method that uses @errp now needs an update. This leads us to unrealize() methods that can fail. Merely passing it to another unrealize method cannot cause failure, though. Here are the ones that do other things with @errp: * virtio_serial_device_unrealize() Fails when qbus_set_hotplug_handler() fails, but still does all the other work. On failure, the device would stay realized with its resources completely gone. Oops. Can't happen, because qbus_set_hotplug_handler() can't actually fail here. Pass &error_abort to qbus_set_hotplug_handler() instead. * hw/ppc/spapr_drc.c's unrealize() Fails when object_property_del() fails, but all the other work is already done. On failure, the device would stay realized with its vmstate registration gone. Oops. Can't happen, because object_property_del() can't actually fail here. Pass &error_abort to object_property_del() instead. * spapr_phb_unrealize() Fails and bails out when remove_drcs() fails, but other work is already done. On failure, the device would stay realized with some of its resources gone. Oops. remove_drcs() fails only when chassis_from_bus()'s object_property_get_uint() fails, and it can't here. Pass &error_abort to remove_drcs() instead. Therefore, no unrealize method can fail before this patch. device_set_realized()'s recursive unrealization via bus uses object_property_set_bool(). Can't drop @errp there, so pass &error_abort. We similarly unrealize with object_property_set_bool() elsewhere, always ignoring errors. Pass &error_abort instead. Several unrealize methods no longer handle errors from other unrealize methods: virtio_9p_device_unrealize(), virtio_input_device_unrealize(), scsi_qdev_unrealize(), ... Much of the deleted error handling looks wrong anyway. One unrealize methods no longer ignore such errors: usb_ehci_pci_exit(). Several realize methods no longer ignore errors when rolling back: v9fs_device_realize_common(), pci_qdev_unrealize(), spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(), virtio_device_realize(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-17-armbru@redhat.com>
* pci: Honour wmask when resetting PCI_INTERRUPT_LINEBALATON Zoltan2020-03-171-1/+4
| | | | | | | | | | | | | | | | | | The pci_do_device_reset() function (called from pci_device_reset) clears the PCI_INTERRUPT_LINE config reg of devices on the bus but did this without taking wmask into account. We'll have a device model now that needs to set a constant value for this reg and this patch allows to do that without additional workaround in device emulation to reverse the effect of this PCI bus reset function. Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-id: 20200313082444.2439-4-mark.cave-ayland@ilande.co.uk Signed-off-by: John Snow <jsnow@redhat.com>
* qdev: set properties with device_class_set_props()Marc-André Lureau2020-01-241-1/+1
| | | | | | | | | | | | | | | | | | | | | The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* migration: Define VMSTATE_INSTANCE_ID_ANYPeter Xu2020-01-201-1/+1
| | | | | | | | | | | Define the new macro VMSTATE_INSTANCE_ID_ANY for callers who wants to auto-generate the vmstate instance ID. Previously it was hard coded as -1 instead of this macro. It helps to change this default value in the follow up patches. No functional change. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
* hw/pci: Remove the "command_serr_enable" propertyThomas Huth2019-12-181-5/+1Star
| | | | | | | | | Now that the old pc-0.x machine types have been removed, this config knob is not required anymore. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20191209125248.5849-4-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* pci: Use PCI aliases when determining device IOMMU address spaceAlex Williamson2019-11-051-3/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PCIe requester IDs are used by modern IOMMUs to differentiate devices in order to provide a unique IOVA address space per device. These requester IDs are composed of the bus/device/function (BDF) of the requesting device. Conventional PCI pre-dates this concept and is simply a shared parallel bus where transactions are claimed by decoding target ranges rather than the packetized, point-to-point mechanisms of PCI-express. In order to interface conventional PCI to PCIe, the PCIe-to-PCI bridge creates and accepts packetized transactions on behalf of all downstream devices, using one of two potential forms of a requester ID relating to the bridge itself or its subordinate bus. All downstream devices are therefore aliased by the bridge's requester ID and it's not possible for the IOMMU to create unique IOVA spaces for devices downstream of such buses. At least that's how it works on bare metal. Until now point we've ignored this nuance of vIOMMU support in QEMU, creating a unique AddressSpace per device regardless of the virtual bus topology. Aside from simply being true to bare metal behavior, there are aspects of a shared address space that we can use to our advantage when designing a VM. For instance, a PCI device assignment scenario where we have the following IOMMU group on the host system: $ ls /sys/kernel/iommu_groups/1/devices/ 0000:00:01.0 0000:01:00.0 0000:01:00.1 An IOMMU group is considered the smallest set of devices which are fully DMA isolated from other devices by the IOMMU. In this case the root port at 00:01.0 does not guarantee that it prevents peer to peer traffic between the endpoints on bus 01: and the devices are therefore grouped together. VFIO considers an IOMMU group to be the smallest unit of device ownership and allows only a single shared IOVA space per group due to the limitations of the isolation. Therefore, if we attempt to create the following VM, we get an error: qemu-system-x86_64 -machine q35... \ -device intel-iommu,intremap=on \ -device pcie-root-port,addr=1e.0,id=pcie.1 \ -device vfio-pci,host=1:00.0,bus=pcie.1,addr=0.0,multifunction=on \ -device vfio-pci,host=1:00.1,bus=pcie.1,addr=0.1 qemu-system-x86_64: -device vfio-pci,host=1:00.1,bus=pcie.1,addr=0.1: vfio \ 0000:01:00.1: group 1 used in multiple address spaces VFIO only allows a single IOVA space (AddressSpace) for both devices, but we've placed them into a topology where the vIOMMU expects a separate AddressSpace for each device. On bare metal we know that a conventional PCI bus would provide the sort of aliasing we need here, forcing the IOMMU to consider these devices to be part of a single shared IOVA space. The support provided here does the same for QEMU, such that we can create a conventional PCI topology to expose equivalent AddressSpace sharing requirements to the VM: qemu-system-x86_64 -machine q35... \ -device intel-iommu,intremap=on \ -device pcie-pci-bridge,addr=1e.0,id=pci.1 \ -device vfio-pci,host=1:00.0,bus=pci.1,addr=1.0,multifunction=on \ -device vfio-pci,host=1:00.1,bus=pci.1,addr=1.1 There are pros and cons to this configuration; it's not necessarily recommended, it's simply a tool we can use to create configurations which may provide additional functionality in spite of host hardware limitations or as a benefit to the guest configuration or resource usage. An incomplete list of pros and cons: Cons: a) Extended PCI configuration space is unavailable to devices downstream of a conventional PCI bus. The degree to which this is a drawback depends on the device and guest drivers. b) Applying this topology to devices which are already isolated by the host IOMMU (singleton IOMMU groups) will result in devices which appear to be non-isolated to the VM (non-singleton groups). This can limit configurations within the guest, such as userspace drivers or nested device assignment. Pros: a) QEMU better emulates bare metal. b) Configurations as above are now possible. c) Host IOMMU resources and VM locked memory requirements are reduced in vIOMMU configurations due to shared IOMMU domains on the host and avoidance of duplicate locked memory accounting. Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Message-Id: <157187083548.5439.14747141504058604843.stgit@gimli.home> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* migration: allow unplug during migration for failover devicesJens Freimann2019-10-291-0/+1
| | | | | | | | | | | | | | | | In "b06424de62 migration: Disable hotplug/unplug during migration" we added a check to disable unplug for all devices until we have figured out what works. For failover primary devices qdev_unplug() is called from the migration handler, i.e. during migration. This patch adds a flag to DeviceState which is set to false for all devices and makes an exception for PCI devices that are also primary devices in a failover pair. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-8-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* pci: add option for net failoverJens Freimann2019-10-291-0/+31
| | | | | | | | | | | | | | | | This patch adds a failover_pair_id property to PCIDev which is used to link the primary device in a failover pair (the PCI dev) to a standby (a virtio-net-pci) device. It only supports ethernet devices. Also currently it only supports PCIe devices. The requirement for PCIe is because it doesn't support other hotplug controllers at the moment. The failover functionality can be added to other hotplug controllers like ACPI, SHCP,... later on. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-3-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Include sysemu/sysemu.h a lot lessMarkus Armbruster2019-08-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | In my "build everything" tree, changing sysemu/sysemu.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/qdev-core.h includes sysemu/sysemu.h since recent commit e965ffa70a "qdev: add qdev_add_vm_change_state_handler()". This is a bad idea: hw/qdev-core.h is widely included. Move the declaration of qdev_add_vm_change_state_handler() to sysemu/sysemu.h, and drop the problematic include from hw/qdev-core.h. Touching sysemu/sysemu.h now recompiles some 1800 objects. qemu/uuid.h also drops from 5400 to 1800. A few more headers show smaller improvement: qemu/notify.h drops from 5600 to 5200, qemu/timer.h from 5600 to 4500, and qapi/qapi-types-run-state.h from 5500 to 5000. Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20190812052359.30071-28-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
* numa: Move remaining NUMA declarations from sysemu.h to numa.hMarkus Armbruster2019-08-161-1/+1
| | | | | | | | | | | | Commit e35704ba9c "numa: Move NUMA declarations from sysemu.h to numa.h" left a few NUMA-related macros behind. Move them now. Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-26-armbru@redhat.com>
* Include hw/qdev-properties.h lessMarkus Armbruster2019-08-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
* Include hw/hw.h exactly where neededMarkus Armbruster2019-08-161-1/+0Star
| | | | | | | | | | | | | | | | In my "build everything" tree, changing hw/hw.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The previous commits have left only the declaration of hw_error() in hw/hw.h. This permits dropping most of its inclusions. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-19-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* Include migration/vmstate.h lessMarkus Armbruster2019-08-161-0/+1
| | | | | | | | | | | | | | | | | | In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary. Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* Include hw/irq.h a lot lessMarkus Armbruster2019-08-161-0/+1
| | | | | | | | | | | | | | | | | | | In my "build everything" tree, changing hw/irq.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get qemu_irq and.or qemu_irq_handler. Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to qemu/typedefs.h, and then include hw/irq.h only where it's still needed. Touching it now recompiles only some 500 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-13-armbru@redhat.com>
* Include migration/qemu-file-types.h a lot lessMarkus Armbruster2019-08-161-0/+1
| | | | | | | | | | | | | | | | | In my "build everything" tree, changing migration/qemu-file-types.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The culprit is again hw/hw.h, which supposedly includes it for convenience. Include migration/qemu-file-types.h only where it's needed. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-10-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* Include qemu-common.h exactly where neededMarkus Armbruster2019-06-121-0/+1
| | | | | | | | | | | | | | | | No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
* pci: Fold pci_get_bus_devfn() into its sole callerDavid Gibson2019-05-301-32/+28Star
| | | | | | | | | | | | | | The only remaining caller of pci_get_bus_devfn() is pci_nic_init_nofail(), itself an old compatibility function. Fold the two together to avoid re-using the stale interface. While we're there replace the explicit fprintf()s with error_report(). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20190513061939.3464-6-david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org>
* pcie: Simplify pci_adjust_config_limit()David Gibson2019-05-301-18/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since c2077e2c "pci: Adjust PCI config limit based on bus topology", pci_adjust_config_limit() has been used in the config space read and write paths to only permit access to extended config space on buses which permit it. Specifically it prevents access on devices below a vanilla-PCI bus via some combination of bridges, even if both the host bridge and the device itself are PCI-E. It accomplishes this with a somewhat complex call up the chain of bridges to see if any of them prohibit extended config space access. This is overly complex, since we can always know if the bus will support such access at the point it is constructed. This patch simplifies the test by using a flag in the PCIBus instance indicating whether extended configuration space is accessible. It is false for vanilla PCI buses. For PCI-E buses, it is true for root buses and equal to the parent bus's's capability otherwise. For the special case of sPAPR's paravirtualized PCI root bus, which acts mostly like vanilla PCI, but does allow extended config space access, we override the default value of the flag from the host bridge code. This should cause no behavioural change. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20190513061939.3464-4-david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* pci: Simplify pci_bus_is_root()David Gibson2019-05-211-12/+2Star
| | | | | | | | | | | | | | | | | pci_bus_is_root() currently relies on a method in the PCIBusClass. But it's always known if a PCI bus is a root bus when we create it, so using a dynamic method is overkill. This replaces it with an IS_ROOT bit in a new flags field, which is set on root buses and otherwise clear. As a bonus this removes the special is_root logic from pci_expander_bridge, since it already creates its bus as a root bus. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20190424041959.4087-3-david@gibson.dropbear.id.au>
* spapr: Drop duplicate PCI swizzle codeGreg Kurz2019-04-261-1/+1
| | | | | | | | | | | | | LSI mapping in spapr currently open-codes standard PCI swizzling. It thus duplicates the code of pci_swizzle_map_irq_fn(). Expose the swizzling formula so that it can be used with a slot number when building the device tree. Simply drop pci_spapr_map_irq() and call pci_swizzle_map_irq_fn() instead. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155448184841.8446.13959787238854054119.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* pci: Report fatal errors with error_report(), not error_printf()Markus Armbruster2019-04-171-1/+1
| | | | | | | | Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <20190417190641.26814-6-armbru@redhat.com>
* pci: Allow PCI bus subtypes to support extended config space accessesGreg Kurz2019-04-091-0/+24
| | | | | | | | | | | | | | | Some PHB implementations, eg. PAPR used on pseries machine, act like a regular PCI bus rather than a PCIe bus, but allow access to the PCIe extended config space anyway. Introduce a new PCI bus class method to modelize this behaviour and use it when adjusting the config space size limit during accesses. No behaviour change for existing PCI bus types. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155414130271.574858.4253514266378127489.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* qdev: Let the hotplug_handler_unplug() caller delete the deviceDavid Hildenbrand2019-03-061-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When unplugging a device, at one point the device will be destroyed via object_unparent(). This will, one the one hand, unrealize the removed device hierarchy, and on the other hand, destroy/free the device hierarchy. When chaining hotplug handlers, we want to overwrite a bus hotplug handler by the machine hotplug handler, to be able to perform some part of the plug/unplug and to forward the calls to the bus hotplug handler. For now, the bus hotplug handler would trigger an object_unparent(), not allowing us to perform some unplug action on a device after we forwarded the call to the bus hotplug handler. The device would be gone at that point. machine_unplug_handler(dev) /* eventually do unplug stuff */ bus_unplug_handler(dev) /* dev is gone, we can't do more unplug stuff */ So move the object_unparent() to the original caller of the unplug. For now, keep the unrealize() at the original places of the object_unparent(). For implicitly chained hotplug handlers (e.g. pc code calling acpi hotplug handlers), the object_unparent() has to be done by the outermost caller. So when calling hotplug_handler_unplug() from inside an unplug handler, nothing is to be done. hotplug_handler_unplug(dev) -> calls machine_unplug_handler() machine_unplug_handler(dev) { /* eventually do unplug stuff */ bus_unplug_handler(dev) -> calls unrealize(dev) /* we can do more unplug stuff but device already unrealized */ } object_unparent(dev) In the long run, every unplug action should be factored out of the unrealize() function into the unplug handler (especially for PCI). Then we can get rid of the additonal unrealize() calls and object_unparent() will properly unrealize the device hierarchy after the device has been unplugged. hotplug_handler_unplug(dev) -> calls machine_unplug_handler() machine_unplug_handler(dev) { /* eventually do unplug stuff */ bus_unplug_handler(dev) -> only unplugs, does not unrealize /* we can do more unplug stuff */ } object_unparent(dev) -> will unrealize The original approach was suggested by Igor Mammedov for the PCI part, but I extended it to all hotplug handlers. I consider this one step into the right direction. To summarize: - object_unparent() on synchronous unplugs is done by common code -- "Caller of hotplug_handler_unplug" - object_unparent() on asynchronous unplugs ("unplug requests") has to be done manually -- "Caller of hotplug_handler_unplug" Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190228122849.4296-2-david@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* avoid TABs in files that only contain a fewPaolo Bonzini2019-01-111-22/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most files that have TABs only contain a handful of them. Change them to spaces so that we don't confuse people. disas, standard-headers, linux-headers and libdecnumber are imported from other projects and probably should be exempted from the check. Outside those, after this patch the following files still contain both 8-space and TAB sequences at the beginning of the line. Many of them have a majority of TABs, or were initially committed with all tabs. bsd-user/i386/target_syscall.h bsd-user/x86_64/target_syscall.h crypto/aes.c hw/audio/fmopl.c hw/audio/fmopl.h hw/block/tc58128.c hw/display/cirrus_vga.c hw/display/xenfb.c hw/dma/etraxfs_dma.c hw/intc/sh_intc.c hw/misc/mst_fpga.c hw/net/pcnet.c hw/sh4/sh7750.c hw/timer/m48t59.c hw/timer/sh_timer.c include/crypto/aes.h include/disas/bfd.h include/hw/sh4/sh.h libdecnumber/decNumber.c linux-headers/asm-generic/unistd.h linux-headers/linux/kvm.h linux-user/alpha/target_syscall.h linux-user/arm/nwfpe/double_cpdo.c linux-user/arm/nwfpe/fpa11_cpdt.c linux-user/arm/nwfpe/fpa11_cprt.c linux-user/arm/nwfpe/fpa11.h linux-user/flat.h linux-user/flatload.c linux-user/i386/target_syscall.h linux-user/ppc/target_syscall.h linux-user/sparc/target_syscall.h linux-user/syscall.c linux-user/syscall_defs.h linux-user/x86_64/target_syscall.h slirp/cksum.c slirp/if.c slirp/ip.h slirp/ip_icmp.c slirp/ip_icmp.h slirp/ip_input.c slirp/ip_output.c slirp/mbuf.c slirp/misc.c slirp/sbuf.c slirp/socket.c slirp/socket.h slirp/tcp_input.c slirp/tcpip.h slirp/tcp_output.c slirp/tcp_subr.c slirp/tcp_timer.c slirp/tftp.c slirp/udp.c slirp/udp.h target/cris/cpu.h target/cris/mmu.c target/cris/op_helper.c target/sh4/helper.c target/sh4/op_helper.c target/sh4/translate.c tcg/sparc/tcg-target.inc.c tests/tcg/cris/check_addo.c tests/tcg/cris/check_moveq.c tests/tcg/cris/check_swap.c tests/tcg/multiarch/test-mmap.c ui/vnc-enc-hextile-template.h ui/vnc-enc-zywrle.h util/envlist.c util/readline.c The following have only TABs: bsd-user/i386/target_signal.h bsd-user/sparc64/target_signal.h bsd-user/sparc64/target_syscall.h bsd-user/sparc/target_signal.h bsd-user/sparc/target_syscall.h bsd-user/x86_64/target_signal.h crypto/desrfb.c hw/audio/intel-hda-defs.h hw/core/uboot_image.h hw/sh4/sh7750_regnames.c hw/sh4/sh7750_regs.h include/hw/cris/etraxfs_dma.h linux-user/alpha/termbits.h linux-user/arm/nwfpe/fpopcode.h linux-user/arm/nwfpe/fpsr.h linux-user/arm/syscall_nr.h linux-user/arm/target_signal.h linux-user/cris/target_signal.h linux-user/i386/target_signal.h linux-user/linux_loop.h linux-user/m68k/target_signal.h linux-user/microblaze/target_signal.h linux-user/mips64/target_signal.h linux-user/mips/target_signal.h linux-user/mips/target_syscall.h linux-user/mips/termbits.h linux-user/ppc/target_signal.h linux-user/sh4/target_signal.h linux-user/sh4/termbits.h linux-user/sparc64/target_syscall.h linux-user/sparc/target_signal.h linux-user/x86_64/target_signal.h linux-user/x86_64/termbits.h pc-bios/optionrom/optionrom.h slirp/mbuf.h slirp/misc.h slirp/sbuf.h slirp/tcp.h slirp/tcp_timer.h slirp/tcp_var.h target/i386/svm.h target/sparc/asi.h target/xtensa/core-dc232b/xtensa-modules.inc.c target/xtensa/core-dc233c/xtensa-modules.inc.c target/xtensa/core-de212/core-isa.h target/xtensa/core-de212/xtensa-modules.inc.c target/xtensa/core-fsf/xtensa-modules.inc.c target/xtensa/core-sample_controller/core-isa.h target/xtensa/core-sample_controller/xtensa-modules.inc.c target/xtensa/core-test_kc705_be/core-isa.h target/xtensa/core-test_kc705_be/xtensa-modules.inc.c tests/tcg/cris/check_abs.c tests/tcg/cris/check_addc.c tests/tcg/cris/check_addcm.c tests/tcg/cris/check_addoq.c tests/tcg/cris/check_bound.c tests/tcg/cris/check_ftag.c tests/tcg/cris/check_int64.c tests/tcg/cris/check_lz.c tests/tcg/cris/check_openpf5.c tests/tcg/cris/check_sigalrm.c tests/tcg/cris/crisutils.h tests/tcg/cris/sys.c tests/tcg/i386/test-i386-ssse3.c ui/vgafont.h Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20181213223737.11793-3-pbonzini@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* pci: allow cleanup/unregistration of PCI root busesMichael Roth2019-01-081-0/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds cleanup counterparts to pci_register_root_bus(), pci_root_bus_new(), and pci_bus_irqs(). These cleanup routines are needed in the case of hotpluggable PCIHostBridge implementations. Currently we can rely on the object_unparent()'ing of the PCIHostState recursively unparenting and cleaning up it's child buses, but we need explicit calls to also: 1) remove the PCIHostState from pci_host_bridges global list. otherwise, we risk accessing freed memory when we access the list later 2) clean up memory allocated in pci_bus_irqs() Both are handled outside the context of any particular bus or host bridge's init/realize functions, making it difficult to avoid the need for explicit cleanup functions without remodeling how PCIHostBridges are created. So keep it simple and just add them for now. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* pci: Sync PCIe downstream port LNKSTA on readAlex Williamson2018-12-191-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PCIe link speed and width between a downstream device and its upstream port is negotiated on real hardware and susceptible to dynamic changes due to signal issues and power management. In the emulated device case there is no real hardware link, but we still might wish to have some consistency between endpoint and downstream port via a virtual negotiation. There is of course a real link for assigned devices and this same virtual negotiation allows the downstream port to match the endpoint, synchronizing on every read to support underlying physical hardware dynamically adjusting the link. This negotiation is intentionally unidirectional for compatibility. If the endpoint exceeds the capabilities of the downstream port or there is no endpoint device, the downstream port reports negotiation to its maximum speed and width, matching the previous case where negotiation was absent. De-tuning the endpoint to match a virtual link doesn't seem to benefit anyone and is a condition we've thus far reported without functional issues. Note that PCI_EXP_LNKSTA is already ignored for migration compatibility via pcie_cap_v1_fill(). Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Tested-by: Geoffrey McRae <geoff@hostfission.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* hw/pci/pci.c: Don't use load_image()Peter Maydell2018-12-141-1/+5
| | | | | | | | | | | | | | | | The load_image() function is deprecated, as it does not let the caller specify how large the buffer to read the file into is. Instead use load_image_size(). While we are converting this code, add an error-check for read failure. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20181130151712.2312-5-peter.maydell@linaro.org
* vmstate: constify VMStateFieldMarc-André Lureau2018-11-271-4/+4
| | | | | | | | Because they are supposed to remain const. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20181114132931.22624-1-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qmp, hmp: make subsystem/system-vendor identities optionalDenis V. Lunev2018-10-111-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | According to PCI specification, subsystem id and subsystem vendor id are present only in type 0 and type 2 headers (at different offsets), but not in type 1 headers. Thus we should make this data optional in struct PciDeviceId and skip reporting them via HMP if the information is not available. Additional (wrong information) about PCI bridges (Type1 devices) has been added in 5383a705 and fortunately not released. This patch fixes that problem. The problem was spotted by Markus. Signed-off-by: Denis V. Lunev <den@openvz.org> CC: "Dr. David Alan Gilbert" <dgilbert@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: Markus Armbruster <armbru@redhat.com> Message-Id: <20181002135538.12113-1-den@openvz.org> Reported-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
* qmp, hmp: add PCI subsystem id and vendor id to PCI infoDenis V. Lunev2018-09-251-0/+3
| | | | | | | | | | | | | | | | | | | | | | This is a long story. Red Hat has relicensed Windows KVM device drivers in 2018 and there was an agreement that to avoid WHQL driver conflict software manufacturers should set proper PCI subsystem vendor ID in their distributions. Thus PCI subsystem vendor id becomes actively used. The problem is that this field is applied by us via hardware compats. Thus technically it could be lost. This patch adds PCI susbsystem id and vendor id to exportable parameters for validation. Signed-off-by: Denis V. Lunev <den@openvz.org> CC: "Dr. David Alan Gilbert" <dgilbert@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: Markus Armbruster <armbru@redhat.com> Message-Id: <20180918095852.28422-1-den@openvz.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
* Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell2018-03-201-14/+0Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | virtio,vhost,pci,pc: features, cleanups SRAT tables for DIMM devices new virtio net flags for speed/duplex post-copy migration support in vhost cleanups in pci Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 20 Mar 2018 14:40:43 GMT # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (51 commits) postcopy shared docs libvhost-user: Claim support for postcopy postcopy: Allow shared memory vhost: Huge page align and merge vhost+postcopy: Wire up POSTCOPY_END notify vhost-user: Add VHOST_USER_POSTCOPY_END message libvhost-user: mprotect & madvises for postcopy vhost+postcopy: Call wakeups vhost+postcopy: Add vhost waker postcopy: postcopy_notify_shared_wake postcopy: helper for waking shared vhost+postcopy: Resolve client address postcopy-ram: add a stub for postcopy_request_shared_page vhost+postcopy: Helper to send requests to source for shared pages vhost+postcopy: Stash RAMBlock and offset vhost+postcopy: Send address back to qemu libvhost-user+postcopy: Register new regions with the ufd migration/ram: ramblock_recv_bitmap_test_byte_offset postcopy+vhost-user: Split set_mem_table for postcopy vhost+postcopy: Transmit 'listen' to slave ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # scripts/update-linux-headers.sh
| * hw/pci: remove obsolete PCIDevice->init()Philippe Mathieu-Daudé2018-03-201-14/+0Star
| | | | | | | | | | | | | | | | | | All PCI devices are now QOM'ified. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* | net: allow using any PCI NICs in -net or -nicPaolo Bonzini2018-03-121-31/+30Star
|/ | | | | | | | | | | Remove the hard-coded list of PCI NIC names; instead, fill an array using all PCI devices listed under DEVICE_CATEGORY_NETWORK. Keep the old shortcut "virtio" for virtio-net-pci. Suggested-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qapi: Empty out qapi-schema.jsonMarkus Armbruster2018-03-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The previous commit improved compile time by including less of the generated QAPI headers. This is impossible for stuff defined directly in qapi-schema.json, because that ends up in headers that that pull in everything. Move everything but include directives from qapi-schema.json to new sub-module qapi/misc.json, then include just the "misc" shard where possible. It's possible everywhere, except: * monitor.c needs qmp-command.h to get qmp_init_marshal() * monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need qapi-event.h to get enum QAPIEvent Perhaps we'll get rid of those some other day. Adding a type to qapi/migration.json now recompiles some 120 instead of 2300 out of 5100 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-25-armbru@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
* Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell2018-02-131-2/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | virtio,vhost,pci,pc: features, fixes and cleanups - new stats in virtio balloon - virtio eventfd rework for boot speedup - vhost memory rework for boot speedup - fixes and cleanups all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 13 Feb 2018 16:29:55 GMT # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (22 commits) virtio-balloon: include statistics of disk/file caches acpi-test: update FADT lpc: drop pcie host dependency tests: acpi: fix FADT not being compared to reference table hw/pci-bridge: fix pcie root port's IO hints capability libvhost-user: Support across-memory-boundary access libvhost-user: Fix resource leak virtio-balloon: unref the memory region before continuing pci: removed the is_express field since a uniform interface was inserted virtio-blk: enable multiple vectors when using multiple I/O queues pci/bus: let it has higher migration priority pci-bridge/i82801b11: clear bridge registers on platform reset vhost: Move log_dirty check vhost: Merge and delete unused callbacks vhost: Clean out old vhost_set_memory and friends vhost: Regenerate region list from changed sections list vhost: Merge sections added to temporary list vhost: Simplify ring verification checks vhost: Build temporary section list and deref after commit virtio: improve virtio devices initialization time ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * pci: removed the is_express field since a uniform interface was insertedYoni Bettan2018-02-081-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | according to Eduardo Habkost's commit fd3b02c889 all PCIEs now implement INTERFACE_PCIE_DEVICE so we don't need is_express field anymore. Devices that implements only INTERFACE_PCIE_DEVICE (is_express == 1) or devices that implements only INTERFACE_CONVENTIONAL_PCI_DEVICE (is_express == 0) where not affected by the change. The only devices that were affected are those that are hybrid and also had (is_express == 1) - therefor only: - hw/vfio/pci.c - hw/usb/hcd-xhci.c - hw/xen/xen_pt.c For those 3 I made sure that QEMU_PCI_CAP_EXPRESS is on in instance_init() Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Yoni Bettan <ybettan@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* | Include qapi/error.h exactly where neededMarkus Armbruster2018-02-091-0/+2
|/ | | | | | | | | | | | | | This cleanup makes the number of objects depending on qapi/error.h drop from 1910 (out of 4743) to 1612 in my "build everything" tree. While there, separate #include from file comment with a blank line, and drop a useless comment on why qemu/osdep.h is included first. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-5-armbru@redhat.com> [Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
* hw/pci*: Replace fprintf(stderr, "*\n" with error_report()Alistair Francis2018-02-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace a large number of the fprintf(stderr, "*\n" calls with error_report(). The functions were renamed with these commands and then compiler issues where manually fixed. find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + Some lines where then manually tweaked to pass checkpatch. A trailing '.' was removed in hw/pci/pci.c Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Conversions that aren't followed by exit() dropped, because they might be inappropriate. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180203084315.20497-9-armbru@redhat.com>
* pci: Eliminate pci_find_primary_bus()David Gibson2017-12-051-16/+0Star
| | | | | | | | | | | | | | | pci_find_primary_bus() only has one user, in pc_xen_hvm_init(). That's inside the machine construction code, so it already has easy access to the machine's primary PCI bus. Get it directly, and thereby remove pci_find_primary_bus(). This removes one of only a handful of users of the ugly pci_host_bridges global. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
* pci: Eliminate redundant PCIDevice::bus pointerDavid Gibson2017-12-051-36/+40
| | | | | | | | | | | | | | | | | The bus pointer in PCIDevice is basically redundant with QOM information. It's always initialized to the qdev_get_parent_bus(), the only difference is the type. Therefore this patch eliminates the field, instead creating a pci_get_bus() helper to do the type mangling to derive it conveniently from the QOM Device object underneath. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
* pci: Rename root bus initialization functions for clarityDavid Gibson2017-12-051-23/+26
| | | | | | | | | | | | | | | | | | pci_bus_init(), pci_bus_new_inplace(), pci_bus_new() and pci_register_bus() are misleadingly named. They're not used for initializing *any* PCI bus, but only for a root PCI bus. Non-root buses - i.e. ones under a logical PCI to PCI bridge - are instead created with a direct qbus_create_inplace() (see pci_bridge_initfn()). This patch renames the functions to make it clear they're only used for a root bus. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
* pci: Initialize pci_dev->name before useAlexey Kardashevskiy2017-11-161-1/+1
| | | | | | | | | | | This moves pci_dev->name initialization earlier so pci_dev->bus_master_as could get a name instead of an empty string. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* pci: Validate interfaces on base_class_initEduardo Habkost2017-10-151-0/+12
| | | | | | | | | | | Make sure we don't forget to add the Conventional PCI or PCI Express interface names on PCI device classes in the future. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Revieed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* pci: conventional-pci-device and pci-express-device interfacesEduardo Habkost2017-10-151-0/+12
| | | | | | | | | | | | | Those two interfaces will be used to indicate which device types support Conventional PCI or PCI Express buses. Management software will be able to use the qom-list-types QMP command to query that information. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* net: Add SunGEM device emulation as found on Apple UniNorthBenjamin Herrenschmidt2017-09-151-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | This adds a simplistic emulation of the Sun GEM ethernet controller found in Apple ASICs. Currently we only support the Apple UniNorth 1.x variant, but the other Apple or Sun variants should mostly be a matter of adding PCI IDs options. We have a very primitive emulation of a single Broadcom 5201 PHY which is supported by the MacOS driver. This model brings out-of-the-box networking to MacOS 9, and all versions of OS X I tried with the mac99 platform. Further improvements from Mark: - Remove sungem.h file, moving constants into sungem.c as required - Switch to using tracepoints for debugging - Split register blocks into separate memory regions - Use arrays in SunGEMState to hold register values - Add state-saving support Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* pci: add reserved slot check to do_pci_register_device()Mark Cave-Ayland2017-09-081-3/+15
| | | | | | | | | | | | | Add a new slot_reserved_mask bitmask to PCIBus indicating whether or not each PCI slot on the bus is reserved. Ensure that it is initialised to zero to maintain the existing behaviour that all slots are available by default, and add the additional check with appropriate error reporting to do_pci_register_device(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* pci: move check for existing devfn into new pci_bus_devfn_available() helperMark Cave-Ayland2017-09-081-2/+8
| | | | | | | | | Also touch up the logic in do_pci_register_device() accordingly. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2025-01-09 18:22:34 +0100