summaryrefslogtreecommitdiffstats
path: root/hw/ppc/sam460ex.c
Commit message (Collapse)AuthorAgeFilesLines
* qtest: delete superfluous inclusions of qtest.hChen Qun2021-03-091-1/+0Star
| | | | | | | | | | There are 23 files that include the "sysemu/qtest.h", but they do not use any qtest functions. Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com> Acked-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210226081414.205946-1-kuhn.chenqun@huawei.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
* sam460ex: Use type cast macro instead of simple castBALATON Zoltan2021-01-191-5/+2Star
| | | | | | | | | | | | | | Use the PCI_BUS type cast macro to convert result of qdev_get_child_bus(). Also remove the check for NULL afterwards which should not be needed because sysbus_create_simple() uses error_abort and we create the PCI host object here that's expected to have a PCI bus so this shouldn't fail. Even if it would fail that would be due to a programmer error so an error message is not necessary. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <a4dc55b56eed3ce899b7bf9835b980a114c52598.1610143658.git.balaton@eik.bme.hu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* hw/ppc/sam460ex: Drop use of ppcuic_init()Peter Maydell2021-01-191-16/+53
| | | | | | | | | Switch the sam460ex board to directly creating and configuring the UIC, rather than doing it via the old ppcuic_init() helper function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20210108171212.16500-2-peter.maydell@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* vl: extract softmmu/datadir.cPaolo Bonzini2020-12-101-0/+1
| | | | | Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* load_elf: Remove unused address variables from callersBALATON Zoltan2020-09-261-7/+5Star
| | | | | | | | | | | | | | | | Several callers of load_elf() pass pointers for lowaddr and highaddr parameters which are then not used for anything. This may stem from a misunderstanding that load_elf need a value here but in fact it can take NULL to ignore these values. Remove such unused variables and pass NULL instead from callers that don't need these. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Message-Id: <20200705174020.BDD0174633F@zero.eik.bme.hu> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* hw/i2c: Rename i2c_create_slave() as i2c_slave_create_simple()Philippe Mathieu-Daudé2020-07-161-1/+1
| | | | | | | | | | | | | | | We use "create_simple" names for functions that allocate, initialize, configure and realize device objects: pci_create_simple(), isa_create_simple(), usb_create_simple(). For consistency, rename i2c_create_slave() as i2c_slave_create_simple(). Since we have to update all the callers, also let it return a I2CSlave object. Suggested-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200705224154.16917-5-f4bug@amsat.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
* sysbus: Convert to sysbus_realize() etc. with CoccinelleMarkus Armbruster2020-06-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert from qdev_realize(), qdev_realize_and_unref() with null @bus argument to sysbus_realize(), sysbus_realize_and_unref(). Coccinelle script: @@ expression dev, errp; @@ - qdev_realize(DEVICE(dev), NULL, errp); + sysbus_realize(SYS_BUS_DEVICE(dev), errp); @@ expression sysbus_dev, dev, errp; @@ + sysbus_dev = SYS_BUS_DEVICE(dev); - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); - sysbus_dev = SYS_BUS_DEVICE(dev); @@ expression sysbus_dev, dev, errp; expression expr; @@ sysbus_dev = SYS_BUS_DEVICE(dev); ... when != dev = expr; - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(DEVICE(dev), NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); Whitespace changes minimized manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-46-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
* qdev: Convert uses of qdev_create() with CoccinelleMarkus Armbruster2020-06-151-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the transformation explained in the commit before previous. Takes care of just one pattern that needs conversion. More to come in this series. Coccinelle script: @ depends on !(file in "hw/arm/highbank.c")@ expression bus, type_name, dev, expr; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr; identifier DOWN; @@ - dev = DOWN(qdev_create(bus, type_name)); + dev = DOWN(qdev_new(type_name)); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal); @@ expression bus, type_name, expr; identifier dev; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr, errp; symbol true; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); @@ expression bus, type_name, expr, errp; identifier dev; symbol true; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); The first rule exempts hw/arm/highbank.c, because it matches along two control flow paths there, with different @type_name. Covered by the next commit's manual conversions. Missing #include "qapi/error.h" added manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-10-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
* smbus: Fix spd_data_generate() error API violationMarkus Armbruster2020-04-291-9/+3Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. spd_data_generate() can pass @errp to error_setg() more than once when it adjusts both memory size and type. Harmless, because no caller passes anything that needs adjusting. Until the previous commit, sam460ex passed types that needed adjusting, but not sizes. spd_data_generate()'s contract is rather awkward: If everything's fine, return non-null and don't set an error. Else, if memory size or type need adjusting, return non-null and set an error describing the adjustment. Else, return null and set an error reporting why no data can be generated. Its callers treat the error as a warning even when null is returned. They don't create the "smbus-eeprom" device then. Suspicious. Since the previous commit, only "everything's fine" can actually happen. Drop the unused code and simplify the callers. This gets rid of the error API violation. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200422134815.1584-3-armbru@redhat.com>
* sam460ex: Suppress useless warning on -m 32 and -m 64Markus Armbruster2020-04-291-1/+2
| | | | | | | | | | | | | | | | | | | | Requesting 32 or 64 MiB of RAM with the sam460ex machine type produces a useless warning: qemu-system-ppc: warning: Memory size is too small for SDRAM type, adjusting type This is because sam460ex_init() asks spd_data_generate() for DDR2, which is impossible, so spd_data_generate() corrects it to DDR. The warning goes back to commit 08fd99179a "sam460ex: Clean up SPD EEPROM creation". Make sam460ex_init() pass the correct SDRAM type to get rid of the warning. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200422134815.1584-2-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* ppc/{ppc440_bamboo, sam460ex}: use memdev for RAMIgor Mammedov2020-02-191-1/+2
| | | | | | | | | | | | | | | memory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing MachineClass::default_ram_id and using MachineState::ram instead of manually initializing RAM memory region. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20200219160953.13771-67-imammedo@redhat.com>
* ppc/{ppc440_bamboo, sam460ex}: drop RAM size fixupIgor Mammedov2020-02-191-3/+2Star
| | | | | | | | | | | | | | | | | | | | | If user provided non-sense RAM size, board will complain and continue running with max RAM size supported or sometimes crash like this: %QEMU -M bamboo -m 1 exec.c:1926: find_ram_offset: Assertion `size != 0' failed. Aborted (core dumped) Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user. Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values. That also fixes crash issue, since wrongly calculated size isn't used to allocate RAM Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20200219160953.13771-66-imammedo@redhat.com>
* hw/core/loader: Let load_elf() populate a field with CPU-specific flagsAleksandar Markovic2020-01-291-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While loading the executable, some platforms (like AVR) need to detect CPU type that executable is built for - and, with this patch, this is enabled by reading the field 'e_flags' of the ELF header of the executable in question. The change expands functionality of the following functions: - load_elf() - load_elf_as() - load_elf_ram() - load_elf_ram_sym() The argument added to these functions is called 'pflags' and is of type 'uint32_t*' (that matches 'pointer to 'elf_word'', 'elf_word' being the type of the field 'e_flags', in both 32-bit and 64-bit variants of ELF header). Callers are allowed to pass NULL as that argument, and in such case no lookup to the field 'e_flags' will happen, and no information will be returned, of course. CC: Richard Henderson <rth@twiddle.net> CC: Peter Maydell <peter.maydell@linaro.org> CC: Edgar E. Iglesias <edgar.iglesias@gmail.com> CC: Michael Walle <michael@walle.cc> CC: Thomas Huth <huth@tuxfamily.org> CC: Laurent Vivier <laurent@vivier.eu> CC: Philippe Mathieu-Daudé <f4bug@amsat.org> CC: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> CC: Aurelien Jarno <aurelien@aurel32.net> CC: Jia Liu <proljc@gmail.com> CC: David Gibson <david@gibson.dropbear.id.au> CC: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> CC: BALATON Zoltan <balaton@eik.bme.hu> CC: Christian Borntraeger <borntraeger@de.ibm.com> CC: Thomas Huth <thuth@redhat.com> CC: Artyom Tarasenko <atar4qemu@gmail.com> CC: Fabien Chouteau <chouteau@adacore.com> CC: KONRAD Frederic <frederic.konrad@adacore.com> CC: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> Signed-off-by: Michael Rolnik <mrolnik@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <1580079311-20447-24-git-send-email-aleksandar.markovic@rt-rk.com>
* Include hw/qdev-properties.h lessMarkus Armbruster2019-08-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
* Include hw/hw.h exactly where neededMarkus Armbruster2019-08-161-1/+0Star
| | | | | | | | | | | | | | | | In my "build everything" tree, changing hw/hw.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The previous commits have left only the declaration of hw_error() in hw/hw.h. This permits dropping most of its inclusions. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-19-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* Include sysemu/reset.h a lot lessMarkus Armbruster2019-08-161-0/+1
| | | | | | | | | | | | | | | | | | In my "build everything" tree, changing sysemu/reset.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The main culprit is hw/hw.h, which supposedly includes it for convenience. Include sysemu/reset.h only where it's needed. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-9-armbru@redhat.com>
* pflash: Clean up after commit 368a354f02b, part 2Markus Armbruster2019-03-111-2/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | Our pflash devices are simplistically modelled has having "num-blocks" sectors of equal size "sector-length". Real hardware commonly has sectors of different sizes. How our "sector-length" property is related to the physical device's multiple sector sizes is unclear. Helper functions pflash_cfi01_register() and pflash_cfi02_register() create a pflash device, set properties including "sector-length" and "num-blocks", and realize. They take parameters @size, @sector_len and @nb_blocs. QOMification left parameter @size unused. Obviously, @size should match @sector_len and @nb_blocs, i.e. size == sector_len * nb_blocs. All callers satisfy this. Remove @nb_blocs and compute it from @size and @sector_len. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20190308094610.21210-16-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* pflash: Clean up after commit 368a354f02b, part 1Markus Armbruster2019-03-111-1/+1
| | | | | | | | | | | | QOMification left parameter @qdev unused in pflash_cfi01_register() and pflash_cfi02_register(). All callers pass NULL. Remove. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190308094610.21210-15-armbru@redhat.com>
* sam460ex: Don't size flash memory to match backing imageMarkus Armbruster2019-03-111-15/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Machine "sam460ex" maps its flash memory at address 0xFFF00000. When no image is supplied, its size is 1MiB (0x100000), and 512KiB of ROM get mapped on top of its second half. Else, it's the size of the image rounded up to the next multiple of 64KiB. The rounding is actually useless: pflash_cfi01_realize() fails with "failed to read the initial flash content" unless it's a no-op. I have no idea what happens when the pflash's size exceeds 1MiB. Useful outcomes seem unlikely. I guess memory at the end of the address space remains unmapped when it's smaller than 1MiB. Again, useful outcomes seem unlikely. The physical hardware appears to have 512KiB of flash memory: https://eu.mouser.com/datasheet/2/268/atmel_AT49BV040B-1180330.pdf For now, just set the flash memory size to 1MiB regardless of image size, and document the mess. Cc: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20190308094610.21210-7-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* i2c: Split smbus into partsCorey Minyard2019-02-281-1/+1
| | | | | | | | | | smbus.c and smbus.h had device side code, master side code, and smbus.h has some smbus_eeprom.c definitions. Split them into separate files. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* elf: Add optional function ptr to load_elf() to parse ELF notesLiam Merwick2019-02-051-1/+2
| | | | | | | | | | | | | | | | | | | This patch adds an optional function pointer, 'elf_note_fn', to load_elf() which causes load_elf() to additionally parse any ELF program headers of type PT_NOTE and check to see if the ELF Note is of the type specified by the 'translate_opaque' arg. If a matching ELF Note is found then the specfied function pointer is called to process the ELF note. Passing a NULL function pointer results in ELF Notes being skipped. The first consumer of this functionality is the PVHboot support which needs to read the XEN_ELFNOTE_PHYS32_ENTRY ELF Note while loading the uncompressed kernel binary in order to discover the boot entry address for the x86/HVM direct boot ABI. Signed-off-by: Liam Merwick <liam.merwick@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* sam460ex: Fix support for memory larger than 1GBBALATON Zoltan2019-02-041-2/+4
| | | | | | | | | | | | | Fix the encoding of larger memory modules in the SoC registers which allows specifying more than 1GB memory for sam460ex. Well, only 2GB due to SoC and firmware restrictions which was the only missing value compared to what the real hardware supports. The SoC should support up to 4GB but when setting that the firmware hangs during memory test. This may be an overflow bug in the firmware which I did not try to debug but this may affect real hardware as well. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* ppc4xx: Use ram_addr_t in ppc4xx_sdram_adjust()BALATON Zoltan2019-02-041-1/+1
| | | | | | | | To avoid overflow if larger values are added later use ram_addr_t for the sdram_bank_sizes parameter to match ram_size to which it is compared. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* sam460ex: Clean up SPD EEPROM creationBALATON Zoltan2019-02-041-153/+20Star
| | | | | | | | | Get rid of code from MIPS Malta board used to create SPD EEPROM data (parts of which was not even needed for sam460ex) and use the generic spd_data_generate() function to simplify this. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Support u-boot noload images for arm as used by, NetBSD/evbarm GENERIC kernel.Nick Hudson2019-01-071-1/+1
| | | | | | | | | | | | | | | | | | | | noload kernels are loaded with the u-boot image header and as a result the header size needs adding to the entry point. Fake up a hdr so the kernel image is loaded at the right address and the entry point is adjusted appropriately. The default location for the uboot file is 32MiB above bottom of DRAM. This matches the recommendation in Documentation/arm/Booting. Clarify the load_uimage API to state the passing of a load address when an image doesn't specify one, or when loading a ramdisk is expected. Adjust callers of load_uimage, etc. Signed-off-by: Nick Hudson <skrll@netbsd.org> Message-id: 11488a08-1fe0-a278-2210-deb64731107f@gmx.co.uk Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* sam460ex: use g_new(T, n) instead of g_malloc(sizeof(T) * n)Greg Kurz2018-12-201-1/+1
| | | | | | | | Because it is a recommended coding practice (see HACKING). Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2018-09-24' ↵Peter Maydell2018-09-251-4/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into staging Error reporting & miscellaneous patches for 2018-09-24 # gpg: Signature made Mon 24 Sep 2018 16:16:50 BST # gpg: using RSA key 3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-error-2018-09-24: MAINTAINERS: Fix F: patterns that don't match anything Drop "qemu:" prefix from error_report() arguments qemu-error: make use of {error, warn}_report_once_cond qemu-error: add {error, warn}_report_once_cond Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * Drop "qemu:" prefix from error_report() argumentsMao Zhongyi2018-09-241-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | error_report and friends already add a "qemu-system-xxx" prefix to the string, so a "qemu:" prefix is redundant in the string. Just drop it. Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1537495530-580-1-git-send-email-maozhongyi@cmss.chinamobile.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Markus Armbruster <armbru@redhat.com>
* | ppc: Remove deprecated ppcemb targetThomas Huth2018-08-281-7/+0Star
|/ | | | | | | | | | | There is no known available OS for ppc around anymore that uses page sizes below 4k, so it does not make much sense that we keep wasting our time on building and testing the ppcemb-softmmu target. It has been deprecated since two releases, and nobody complained, so let's remove this now. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* sam460ex: Fix PCI interrupts with multiple devicesBALATON Zoltan2018-08-011-4/+2Star
| | | | | | | | | | | | | | | | | | The four interrupts of the PCI bus are connected to the same UIC pin on the real Sam460ex. Evidence for this can be found in the UBoot source for the Sam460ex in the Sam460ex.c file where PCI_INTERRUPT_LINE is written. Change the ppc440_pcix model to behave more like this. This fixes the problem that can be observed when adding further PCI cards that got their interrupt rotated to other interrupts than PCI INT A. In particular, the bug was observed with an additional OHCI PCI card or an ES1370 sound device. Signed-off-by: Sebastian Bauer <mail@sebastianbauer.info> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Tested-by: Sebastian Bauer <mail@sebastianbauer.info> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* sam460ex: Correct use after free errorBALATON Zoltan2018-07-161-1/+2
| | | | | | | | | | | Commit 51b0d834c changed error handling to report file name in error message but forgot to move freeing it after usage. Noticed by Coverity. Fixes: CID 1394217 Reported-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* sam460ex: Make sam460ex_load_device_tree() handle all errors internallyDavid Gibson2018-07-091-12/+6Star
| | | | | | | | | | | | sam460ex_load_device_tree() handles nearly all possible errors by simply exiting (within helper functions and macros). It handles two early error cases by returning an error. There's no particular point to this, so make it handle those directly as well, removing the need for the caller to handle a failure. As a bonus it gives us more specific error messages. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* sam460ex: Don't check for errors from qemu_fdt_*()David Gibson2018-07-091-20/+6Star
| | | | | | | The qemu_fdt_*() helper functions already exit with a message instead of returning errors, so we don't need to check for errors in the caller. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* sam460ex: Check for errors from libfdt functionsDavid Gibson2018-07-091-2/+3
| | | | | | | | | | | In a couple of places sam460ex_load_device_tree() calls "raw" libfdt functions which can fail, but doesn't check for error codes. At best, if these fail the guest will be silently started in a non-standard state, or it could fail entirely. Fix this by using the _FDT() helper macro which aborts on a libfdt failure. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.0-20180703' ↵Peter Maydell2018-07-031-0/+32
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into staging ppc patch queue 2018-07-03 Here's a last minue pull request before today's soft freeze. Ideally I would have sent this earlier, but I was waiting for a couple of extra fixes I knew were close. And the freeze crept up on me, like always. Most of the changes here are bugfixes in any case. There are some cleanups as well, which have been in my staging tree for a little while. There are a couple of truly new features (some extensions to the sam460ex platform), but these are low risk, since they only affect a new and not really stabilized machine type anyway. Higlights are: * Mac platform improvements from Mark Cave-Ayland * Sam460ex improvements from BALATON Zoltan et al. * XICS interrupt handler cleanups from Cédric Le Goater * TCG improvements for atomic loads and stores from Richard Henderson * Assorted other bugfixes # gpg: Signature made Tue 03 Jul 2018 06:55:22 BST # gpg: using RSA key 6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-3.0-20180703: (35 commits) ppc: Include vga cirrus card into the compiling process target/ppc: Relax reserved bitmask of indexed store instructions target/ppc: set is_jmp on ppc_tr_breakpoint_check spapr: compute default value of "hpt-max-page-size" later target/ppc/kvm: don't pass cpu to kvm_get_smmu_info() target/ppc/kvm: get rid of kvm_get_fallback_smmu_info() ppc440_uc: Basic emulation of PPC440 DMA controller sam460ex: Add RTC device hw/timer: Add basic M41T80 emulation ppc4xx_i2c: Rewrite to model hardware more closely hw/ppc: Give sam46ex its own config option fpu_helper.c: fix setting FPSCR[FI] bit target/ppc: Implement the rest of gen_st_atomic target/ppc: Implement the rest of gen_ld_atomic target/ppc: Use atomic min/max helpers target/ppc: Use MO_ALIGN for EXIWX and ECOWX target/ppc: Split out gen_st_atomic target/ppc: Split out gen_ld_atomic target/ppc: Split out gen_load_locked target/ppc: Tidy gen_conditional_store ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/ppc/spapr.c
| * ppc440_uc: Basic emulation of PPC440 DMA controllerBALATON Zoltan2018-07-031-0/+3
| | | | | | | | | | | | | | | | | | PPC440 SoCs such as the AMCC 460EX have a DMA controller which is used by AmigaOS on the sam460ex. Implement the parts used by AmigaOS so it can get further booting on the sam460ex machine. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
| * sam460ex: Add RTC deviceBALATON Zoltan2018-07-031-0/+1
| | | | | | | | | | | | | | | | The Sam460ex has an M41T80 serial RTC chip on I2C bus 0 at address 0x68. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
| * sam460ex: Fix sam460ex device tree when booting the Linux kernelGuenter Roeck2018-07-031-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | sam460ex (or at least this emulation) does not support the "ibm,cpm" power management. As a result, Linux crashes when trying to access it. Remove its device tree node. Also, if/when we boot the Linux kernel directly, serial port clock frequencies in the device tree file will be unset, and serial port initialization will fail. Add valid frequency values to the serial ports to be able to use it. Also set valid values for the other clock nodes otherwise set by u-boot. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* | hw/ppc: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé2018-07-021-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It eases code review, unit is explicit. Patch generated using: $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/ and modified manually. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20180625124238.25339-33-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* | hw: Use IEC binary prefix definitions from "qemu/units.h"Philippe Mathieu-Daudé2018-07-021-1/+1
|/ | | | | | | | | | | | | Code change produced with: $ git ls-files | egrep '\.[ch]$' | \ xargs sed -i -e 's/\(\W[KMGTPE]\)_BYTE/\1iB/g' Suggested-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts) Message-Id: <20180625124238.25339-6-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell2018-06-041-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | acpi, vhost, misc: fixes, features vDPA support, fix to vhost blk RO bit handling, some include path cleanups, NFIT ACPI table. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 01 Jun 2018 17:25:19 BST # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (31 commits) vhost-blk: turn on pre-defined RO feature bit ACPI testing: test NFIT platform capabilities nvdimm, acpi: support NFIT platform capabilities tests/.gitignore: add entry for generated file arch_init: sort architectures ui: use local path for local headers qga: use local path for local headers colo: use local path for local headers migration: use local path for local headers usb: use local path for local headers sd: fix up include vhost-scsi: drop an unused include ppc: use local path for local headers rocker: drop an unused include e1000e: use local path for local headers ioapic: fix up includes ide: use local path for local headers display: use local path for local headers trace: use local path for local headers migration: drop an unused include ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * ppc: use local path for local headersMichael S. Tsirkin2018-06-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | When pulling in headers that are in the same directory as the C file (as opposed to one in include/), we should use its relative path, without a directory. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
* | hw: Do not include "sysemu/blockdev.h" if it is not necessaryPhilippe Mathieu-Daudé2018-06-011-1/+0Star
|/ | | | | | | | | | | | | | | | The header "hw/boards.h" already includes "sysemu/blockdev.h". Code change produced with: $ git grep '#include "sysemu/blockdev.h"' hw | \ cut -d: -f-1 | \ xargs fgrep -l '#include "hw/boards.h"' | \ xargs sed -i.bak '/#include "sysemu\/blockdev.h"/d' Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-14-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Change references to serial_hds[] to serial_hd()Peter Maydell2018-04-261-4/+4
| | | | | | | | | | Change all the uses of serial_hds[] to go via the new serial_hd() function. Code change produced with: find hw -name '*.[ch]' | xargs sed -i -e 's/serial_hds\[\([^]]*\)\]/serial_hd(\1)/g' Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20180420145249.32435-8-peter.maydell@linaro.org
* sam460ex: Fix timer frequency and clock multipliersBALATON Zoltan2018-04-101-3/+4
| | | | | | | | | | We only emulate timer running at CPU frequency which is what most guests expect so set the frequency to match real hardware. This also allows setting clock multipliers which caused slowdown previously due to wrong timer frequency. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* ppc: Add aCube Sam460ex boardBALATON Zoltan2018-03-061-0/+603
Add emulation of aCube Sam460ex board based on AMCC 460EX embedded SoC. This is not a complete implementation yet with a lot of components still missing but enough for the U-Boot firmware to start and to boot a Linux kernel or AROS. Signed-off-by: François Revol <revol@free.fr> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-12-18 12:59:18 +0100