summaryrefslogtreecommitdiffstats
path: root/hw/scsi
Commit message (Collapse)AuthorAgeFilesLines
...
* vhost-scsi: Call virtio_scsi_common_unrealize() when device realize failedXie Yongji2019-07-191-1/+3
| | | | | | | | This avoids memory leak when device hotplug is failed. Signed-off-by: Xie Yongji <xieyongji@baidu.com> Message-Id: <20190717004606.12444-1-xieyongji@baidu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* virtio-scsi: remove unused argument to virtio_scsi_common_realizePaolo Bonzini2019-07-193-4/+4
| | | | | | | | The argument is not used and passing it clutters error propagation in the callers. So, get rid of it. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* scsi: explicitly list guest-recoverable sense codesPaolo Bonzini2019-07-151-3/+2Star
| | | | | | | | | | It's not really possible to fit all sense codes into errno codes, especially in such a way that sense codes can be properly categorized as either guest-recoverable or host-handled. Create a new function that checks for guest recoverable sense, then scsi_sense_buf_to_errno only needs to be called for host handled sense codes. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* scsi-disk: pass sense correctly for guest-recoverable errorsShinichiro Kawasaki2019-07-151-0/+10
| | | | | | | | | When an error was passed down to the guest because it was recoverable, the sense length was not copied from the SG_IO data. As a result, the guest saw the CHECK CONDITION status but not the sense data. Signed-off-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* virtio-scsi: restart DMA after iothreadStefan Hajnoczi2019-07-081-2/+2
| | | | | | | | | | | | | | | | | | | When the 'cont' command resumes guest execution the vm change state handlers are invoked. Unfortunately there is no explicit ordering between classic qemu_add_vm_change_state_handler() callbacks. When two layers of code both use vm change state handlers, we don't control which handler runs first. virtio-scsi with iothreads hits a deadlock when a failed SCSI command is restarted and completes before the iothread is re-initialized. This patch uses the new qdev_add_vm_change_state_handler() API to guarantee that virtio-scsi's virtio change state handler executes before the SCSI bus children. This way DMA is restarted after the iothread has re-initialized. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* Include qemu-common.h exactly where neededMarkus Armbruster2019-06-121-0/+1
| | | | | | | | | | | | | | | | No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
* Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster2019-06-1213-1/+14
| | | | | | | | | Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
* qemu-common: Move qemu_isalnum() etc. to qemu/ctype.hMarkus Armbruster2019-06-111-1/+1
| | | | | | Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-3-armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
* Merge remote-tracking branch ↵Peter Maydell2019-06-064-6/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/vivier2/tags/trivial-branch-pull-request' into staging Trivial fixes 06/06/2019 # gpg: Signature made Thu 06 Jun 2019 12:05:50 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-pull-request: hw/watchdog/wdt_i6300esb: Use DEVICE() macro to access DeviceState.qdev hw/scsi: Use the QOM BUS() macro to access BusState.qbus hw/sd: Use the QOM BUS() macro to access BusState.qbus hw/audio/ac97: Use the QOM DEVICE() macro to access DeviceState.qdev hw/vfio/pci: Use the QOM DEVICE() macro to access DeviceState.qdev hw/usb-storage: Use the QOM DEVICE() macro to access DeviceState.qdev hw/isa: Use the QOM DEVICE() macro to access DeviceState.qdev hw/s390x/event-facility: Use the QOM BUS() macro to access BusState.qbus hw/pci-bridge: Use the QOM BUS() macro to access BusState.qbus hw/scsi/vmw_pvscsi: Use qbus_reset_all() directly docs/devel/build-system: Update an example test: Fix make target check-report.tap util: Adjust qemu_guest_getrandom_nofail for Coverity vhost: fix incorrect print type migration: fix a typo hw/rdma: Delete unused headers inclusion Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * hw/scsi: Use the QOM BUS() macro to access BusState.qbusPhilippe Mathieu-Daudé2019-06-063-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rather than looking inside the definition of a BusState with "s->bus.qbus", use the QOM prefered style: "BUS(&s->bus)". This patch was generated using the following Coccinelle script: // Use BUS() macros to access BusState.qbus @use_bus_macro_to_access_qbus@ expression obj; identifier bus; @@ -&obj->bus.qbus +BUS(&obj->bus) Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20190528164020.32250-3-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
| * hw/scsi/vmw_pvscsi: Use qbus_reset_all() directlyPhilippe Mathieu-Daudé2019-06-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | Since the BusState is accesible from the SCSIBus object, it is pointless to use qbus_reset_all_fn. Use qbus_reset_all() directly. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Dmitry Fleytman <dmitry.fleytman@gmail.com> Message-Id: <20190528164020.32250-2-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* | Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell2019-06-062-10/+50
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | virtio, pci, pc: cleanups, features stricter rules for acpi tables: we now fail on any difference that isn't whitelisted. vhost-scsi migration. some cleanups all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Wed 05 Jun 2019 20:55:04 BST # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: bios-tables-test: ignore identical binaries tests: acpi: add simple arm/virt testcase tests: add expected ACPI tables for arm/virt board bios-tables-test: list all tables that differ vhost-scsi: Allow user to enable migration vhost-scsi: Add VMState descriptor vhost-scsi: The vhost backend should be stopped when the VM is not running bios-tables-test: add diff allowed list vhost: fix memory leak in vhost_user_scsi_realize vhost: fix incorrect print type vhost: remove the dead code docs: smbios: remove family=x from type2 entry description pci: Fold pci_get_bus_devfn() into its sole caller pci: Make is_bridge a bool pcie: Simplify pci_adjust_config_limit() acpi: pci: use build_append_foo() API to construct MCFG hw/acpi: Consolidate build_mcfg to pci.c Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * vhost-scsi: Allow user to enable migrationLiran Alon2019-06-031-10/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to perform a valid migration of a vhost-scsi device, the following requirements must be met: (1) The virtio-scsi device state needs to be saved & loaded. (2) The vhost backend must be stopped before virtio-scsi device state is saved: (2.1) Sync vhost backend state to virtio-scsi device state. (2.2) No further I/O requests are made by vhost backend to target SCSI device. (2.3) No further guest memory access takes place after VM is stopped. (3) Requests in-flight to target SCSI device are completed before migration handover. (4) Target SCSI device state needs to be saved & loaded into the destination host target SCSI device. Previous commit ("vhost-scsi: Add VMState descriptor") add support to save & load the device state using VMState. This meets requirement (1). When VM is stopped by migration thread (On Pre-Copy complete), the following code path is executed: migration_completion() -> vm_stop_force_state() -> vm_stop() -> do_vm_stop(). do_vm_stop() calls first pause_all_vcpus() which pause all guest vCPUs and then call vm_state_notify(). In case of vhost-scsi device, this will lead to the following code path to be executed: vm_state_notify() -> virtio_vmstate_change() -> virtio_set_status() -> vhost_scsi_set_status() -> vhost_scsi_stop(). vhost_scsi_stop() then calls vhost_scsi_clear_endpoint() and vhost_scsi_common_stop(). vhost_scsi_clear_endpoint() sends VHOST_SCSI_CLEAR_ENDPOINT ioctl to vhost backend which will reach kernel's vhost_scsi_clear_endpoint() which process all pending I/O requests and wait for them to complete (vhost_scsi_flush()). This meets requirement (3). vhost_scsi_common_stop() will stop the vhost backend. As part of this stop, dirty-bitmap is synced and vhost backend state is synced with virtio-scsi device state. As at this point guest vCPUs are already paused, this meets requirement (2). At this point we are left with requirement (4) which is target SCSI device specific and therefore cannot be done by QEMU. Which is the main reason why vhost-scsi adds a migration blocker. However, as this can be handled either by an external orchestrator or by using shared-storage (i.e. iSCSI), there is no reason to limit the orchestrator from being able to explictly specify it wish to enable migration even when VM have a vhost-scsi device. Considering all the above, this commit allows orchestrator to explictly specify that it is responsbile for taking care of requirement (4) and therefore vhost-scsi should not add a migration blocker. Reviewed-by: Nir Weiner <nir.weiner@oracle.com> Reviewed-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com> Signed-off-by: Liran Alon <liran.alon@oracle.com> Message-Id: <20190416125912.44001-4-liran.alon@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
| * vhost-scsi: Add VMState descriptorNir Weiner2019-06-031-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As preparation of enabling migration of vhost-scsi device, define it’s VMState. Note, we keep the convention of verifying in the pre_save() method that the vhost backend must be stopped before attempting to save the device state. Similar to how it is done for vhost-vsock. Reviewed-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Nir Weiner <nir.weiner@oracle.com> Message-Id: <20190416125912.44001-3-liran.alon@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
| * vhost-scsi: The vhost backend should be stopped when the VM is not runningNir Weiner2019-06-031-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | vhost-scsi doesn’t takes into account whether the VM is running or not in order to decide if it should start/stop vhost backend. This would lead to vhost backend still being active when VM's RunState suddenly change to stopped. An example of when this issue is encountered is when Live-Migration Pre-Copy phase completes. As in this case, VM state will be changed to stopped (while vhost backend is still active), which will result in virtio_vmstate_change() -> virtio_set_status() -> vhost_scsi_set_status() executed but vhost_scsi_set_status() will just return without stopping vhost backend. To handle this, change code to consider that vhost processing should be stopped when VM is not running. Similar to how it is done in vhost-vsock device at vhost_vsock_set_status(). Fixes: 5e9be92d7752 ("vhost-scsi: new device supporting the tcm_vhost Linux kernel module”) Reviewed-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Nir Weiner <nir.weiner@oracle.com> Message-Id: <20190416125912.44001-2-liran.alon@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
| * vhost: fix memory leak in vhost_user_scsi_realizeJie Wang2019-05-301-0/+3
| | | | | | | | | | | | | | | | | | | | fix memory leak in vhost_user_scsi_realize Signed-off-by: Jie Wang <wangjie88@huawei.com> Message-Id: <1556608500-12183-1-git-send-email-wangjie88@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
* | scsi-disk: Use qdev_prop_drive_iothreadKevin Wolf2019-06-042-14/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This makes use of qdev_prop_drive_iothread for scsi-disk so that the disk can be attached to a node that is already in the target AioContext. We need to check that the HBA actually supports iothreads, otherwise scsi-disk must make sure that the node is already in the main AioContext. This changes the error message for conflicting iothread settings. Previously, virtio-scsi produced the error message, now it comes from blk_set_aio_context(). Update a test case accordingly. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* | block: Add BlockBackend.ctxKevin Wolf2019-06-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | This adds a new parameter to blk_new() which requires its callers to declare from which AioContext this BlockBackend is going to be used (or the locks of which AioContext need to be taken anyway). The given context is only stored and kept up to date when changing AioContexts. Actually applying the stored AioContext to the root node is saved for another commit. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* | block: Add Error to blk_set_aio_context()Kevin Wolf2019-06-041-3/+7
|/ | | | | | | | Add an Error parameter to blk_set_aio_context() and use bdrv_child_try_set_aio_context() internally to check whether all involved nodes can actually support the AioContext switch. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* megasas: fix mapped frame sizePeter Lieven2019-05-151-1/+1
| | | | | | | | | | | | the current value of 1024 bytes (16 * MFI_FRAME_SIZE) we map is not enough to hold the maximum number of scatter gather elements we advertise. We actually need a maximum of 2048 bytes. This is 128 max sg elements * 16 bytes (sizeof (union mfi_sgl)). Cc: qemu-stable@nongnu.org Signed-off-by: Peter Lieven <pl@kamp.de> Message-Id: <20190404121015.28634-1-pl@kamp.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* trace-events: Shorten file names in commentsMarkus Armbruster2019-03-221-11/+11
| | | | | | | | | | | | | | | We spell out sub/dir/ in sub/dir/trace-events' comments pointing to source files. That's because when trace-events got split up, the comments were moved verbatim. Delete the sub/dir/ part from these comments. Gets rid of several misspellings. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190314180929.27722-3-armbru@redhat.com Message-Id: <20190314180929.27722-3-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* vhost-user: simplify vhost_user_init/vhost_user_cleanupMarc-André Lureau2019-03-131-16/+4Star
| | | | | | | | | | | Take a VhostUserState* that can be pre-allocated, and initialize it with the associated chardev. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Tiwei Bie <tiwei.bie@intel.com> Message-Id: <20190308140454.32437-4-marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* spapr: Use CamelCase properlyDavid Gibson2019-03-121-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* lsi: 810/895A are always little endianSven Schnelle2019-03-111-4/+3Star
| | | | | | Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20190218175529.11237-1-svens@stackframe.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* lsi: return dfifo valueSven Schnelle2019-03-111-1/+1
| | | | | | | Code was assigning DFIFO, but didn't return the value to users. Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20190305195519.24303-6-svens@stackframe.org>
* lsi: use SCSI phase names instead of numbers in traceSven Schnelle2019-03-112-11/+26
| | | | | | | | | This makes trace logs much easier to read, especially for people who are not fluent in SCSI. Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190305195519.24303-5-svens@stackframe.org>
* lsi: use enum type for s->msg_actionSven Schnelle2019-03-111-11/+16
| | | | | | | | This makes the code easier to read - no functional change. Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190305195519.24303-4-svens@stackframe.org>
* lsi: use enum type for s->waitingSven Schnelle2019-03-111-19/+23
| | | | | | | | This makes the code easier to read - no functional change. Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190305195519.24303-3-svens@stackframe.org>
* lsi: use ldn_le_p()/stn_le_p()Sven Schnelle2019-03-111-20/+4Star
| | | | | | | | | Instead of using the open-coded versions, use the helper already present as this makes the code easier to read and less error-prone. Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190305195519.24303-2-svens@stackframe.org>
* scsi-disk: Fix crash if request is invaild or disk is no mediumZhengui Li2019-03-111-13/+24
| | | | | | | | | | | | | | Qemu will crash with the assertion error that "assert(r->req.aiocb != NULL)" in scsi_read_complete if request is invaild or disk is no medium. The error is below: qemu-kvm: hw/scsi/scsi_disk.c:299: scsi_read_complete: Assertion `r->req.aiocb != NULL' failed. This patch add a funtion scsi_read_complete_noio to fix it. Signed-off-by: Zhengui Li <lizhengui@huawei.com> Message-Id: <1551949966-20092-1-git-send-email-lizhengui@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* lsi: check if SIGP bit is already set in Wait reselectSven Schnelle2019-03-111-2/+4
| | | | | | | | | | | | | If SIGP is set, the 'Wait for Reselection' command should jump immediately to the address stored in the second DWORD of the instruction. This fixes spurious hangs in the HP-UX 11.11 installer when the SIGP bit gets set by the kernel before the 'Wait for Reselection' command is executed by SCRIPTS. Signed-off-by: Sven Schnelle <svens@stackframe.org> Tested-by: Helge Deller <deller@gmx.de> Message-Id: <20190217113717.7077-1-svens@stackframe.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* lsi: implement basic SBCL functionalitySven Schnelle2019-03-111-4/+27
| | | | | | | | | | | HP-UX checks this register after sending data to the target. If there's no valid information present, it assumes the client disconnected because the kernel sent to much data. Implement at least some of the SBCL functionality that is possible without having a real SCSI bus. Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20190215194021.20543-1-svens@stackframe.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* virtio-scsi: Fix build with gcc 9Greg Kurz2019-03-111-1/+7
| | | | | | | | | | | | | | | | | | | | | Build fails with gcc 9: CC ppc64-softmmu/hw/scsi/virtio-scsi.o hw/scsi/virtio-scsi.c: In function ‘virtio_scsi_do_tmf’: hw/scsi/virtio-scsi.c:265:39: error: taking address of packed member of ‘struct virtio_scsi_ctrl_tmf_req’ may result in an unaligned pointer value [-Werror=address-of-packed-member] 265 | virtio_tswap32s(VIRTIO_DEVICE(s), &req->req.tmf.subtype); | ^~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors All the fields in struct virtio_scsi_ctrl_tmf_req are naturally aligned, so we could in theory drop QEMU_PACKED. Unfortunately, the header file is imported from linux which already has the packed attribute. Trying to fix that in the update-linux-headers.sh script is likely to produce ugliness. Turn the call to virtio_tswap32s() into an assignment instead. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155137678223.44753.5438092367451176318.stgit@bahia.lan> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* virtio: express virtio dependencies with KconfigYang Zhong2019-03-071-1/+3
| | | | | | | Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-42-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* scsi: express dependencies with KconfigPaolo Bonzini2019-03-072-2/+10
| | | | | | | | | | This automatically removes the SCSI subsystem from the binary altogether if no controllers are selected. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-34-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* build: convert pci.mak to KconfigPaolo Bonzini2019-03-071-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of including the same list of devices for each target, set CONFIG_PCI to true, and make the devices default to present whenever PCI is available. However, s390x does not want all the PCI devices, so there is a separate symbol to enable them. Done mostly with the following script: while read i; do i=${i%=y}; i=${i#CONFIG_} sed -i -e'/^config '$i'$/!b' -en \ -e'a\' -e' default y if PCI_DEVICES\' -e' depends on PCI' \ `grep -lw $i hw/*/Kconfig` done < default-configs/pci.mak followed by replacing a few "depends on" clauses with "select" whenever the symbol is not really related to PCI. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-31-yang.zhong@intel.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* build: switch to KconfigPaolo Bonzini2019-03-071-0/+7
| | | | | | | | | | | | | | | | | | | | The make_device_config.sh script is replaced by minikconf, which is modified to support the same command line as its predecessor. The roots of the parsing are default-configs/*.mak, Kconfig.host and hw/Kconfig. One difference with make_device_config.sh is that all symbols have to be defined in a Kconfig file, including those coming from the configure script. This is the reason for the Kconfig.host file introduced in the previous patch. Whenever a file in default-configs/*.mak used $(...) to refer to a config-host.mak symbol, this is replaced by a Kconfig dependency; this part must be done already in this patch for bisectability. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-28-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* kconfig: introduce kconfig filesPaolo Bonzini2019-03-071-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qdev: pass an Object * to qbus_set_hotplug_handler()Michael Roth2019-02-172-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Certain devices types, like memory/CPU, are now being handled using a hotplug interface provided by a top-level MachineClass. Hotpluggable host bridges are another such device where it makes sense to use a machine-level hotplug handler. However, unlike those devices, host-bridges have a parent bus (the main system bus), and devices with a parent bus use a different mechanism for registering their hotplug handlers: qbus_set_hotplug_handler(). This interface currently expects a handler to be a subclass of DeviceClass, but this is not the case for MachineClass, which derives directly from ObjectClass. Internally, the interface only requires an ObjectClass, so expose that in qbus_set_hotplug_handler(). Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <154999589921.690774.3640149277362188566.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* scsi-generic: Convert from DPRINTF() macro to trace eventsLaurent Vivier2019-02-052-30/+37
| | | | | | | | Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20181211163105.31834-3-lvivier@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* scsi-disk: Convert from DPRINTF() macro to trace eventsLaurent Vivier2019-02-052-53/+79
| | | | | | | | Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20181211163105.31834-2-lvivier@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* scsi-generic: avoid possible out-of-bounds access to r->bufPaolo Bonzini2019-02-051-8/+10
| | | | | | | | | | | | | | | | | | | | Whenever the allocation length of a SCSI request is shorter than the size of the VPD page list, page_idx is used blindly to index into r->buf. Even though the stores in the insertion sort are protected against overflows, the same is not true of the reads and the final store of 0xb0. This basically does the same thing as commit 57dbb58d80 ("scsi-generic: avoid out-of-bounds access to VPD page list", 2018-11-06), except that here the allocation length can be chosen by the guest. Note that according to the SCSI standard, the contents of the PAGE LENGTH field are not altered based on the allocation length. The code was introduced by commit 6c219fc8a1 ("scsi-generic: keep VPD page list sorted", 2018-11-06) but the overflow was already possible before. Reported-by: Kevin Wolf <kwolf@redhat.com> Fixes: a71c775b24ebc664129eb1d9b4c360590353efd5 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* scsi-disk: Add device_id propertyKevin Wolf2019-02-011-8/+16
| | | | | | | | | | | | | The new device_id property specifies which value to use for the vendor specific designator in the Device Identification VPD page. In particular, this is necessary for libvirt to maintain guest ABI compatibility when no serial number is given and a VM is switched from -drive (where the BlockBackend name is used) to -blockdev (where the vendor specific designator is left out by default). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
* scsi-disk: Don't use empty string as device idKevin Wolf2019-02-011-6/+8
| | | | | | | | | | | | | | | | | | | | | | scsi-disk includes in the Device Identification VPD page, depending on configuration amongst others, a vendor specific designator that consists either of the serial number if given or the BlockBackend name (which is a host detail that better shouldn't have been leaked to the guest, but now we have to maintain it for compatibility). With anonymous BlockBackends, i.e. scsi-disk devices constructed with drive=<node-name>, and no serial number explicitly specified, this ends up as an empty string. If this happens to more than one disk, we have accidentally signalled to the OS that this is a multipath setup, which is obviously not what was intended. Instead of using an empty string for the vendor specific designator, simply leave out that designator, which makes Linux detect such setups as separate disks again. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* virtio-scsi: Forbid devices with different iothreads sharing a blockdevAlberto Garcia2019-02-011-0/+7
| | | | | | | | This patch forbids attaching a disk to a SCSI device if its using a different AioContext. Test case included. Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* scsi-disk: Acquire the AioContext in scsi_*_realize()Alberto Garcia2019-02-011-3/+20
| | | | | | | | This fixes a crash when attaching two disks with the same blockdev to a SCSI device that is using iothreads. Test case included. Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* virtio-scsi: Move BlockBackend back to the main AioContext on unplugAlberto Garcia2019-02-011-0/+6
| | | | | | | | | This fixes a crash when attaching a disk to a SCSI device using iothreads, then detaching it and reattaching it again. Test case included. Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qemu: avoid memory leak while remove diskJian Wang2019-01-152-2/+4
| | | | | | | | | | | | | | | | Memset vhost_dev to zero in the vhost_dev_cleanup function. This causes dev.vqs to be NULL, so that vqs does not free up space when calling the g_free function. This will result in a memory leak. But you can't release vqs directly in the vhost_dev_cleanup function, because vhost_net will also call this function, and vhost_net's vqs is assigned by array. In order to solve this problem, we first save the pointer of vqs, and release the space of vqs after vhost_dev_cleanup is called. Signed-off-by: Jian Wang <wangjian161@huawei.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* avoid TABs in files that only contain a fewPaolo Bonzini2019-01-111-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most files that have TABs only contain a handful of them. Change them to spaces so that we don't confuse people. disas, standard-headers, linux-headers and libdecnumber are imported from other projects and probably should be exempted from the check. Outside those, after this patch the following files still contain both 8-space and TAB sequences at the beginning of the line. Many of them have a majority of TABs, or were initially committed with all tabs. bsd-user/i386/target_syscall.h bsd-user/x86_64/target_syscall.h crypto/aes.c hw/audio/fmopl.c hw/audio/fmopl.h hw/block/tc58128.c hw/display/cirrus_vga.c hw/display/xenfb.c hw/dma/etraxfs_dma.c hw/intc/sh_intc.c hw/misc/mst_fpga.c hw/net/pcnet.c hw/sh4/sh7750.c hw/timer/m48t59.c hw/timer/sh_timer.c include/crypto/aes.h include/disas/bfd.h include/hw/sh4/sh.h libdecnumber/decNumber.c linux-headers/asm-generic/unistd.h linux-headers/linux/kvm.h linux-user/alpha/target_syscall.h linux-user/arm/nwfpe/double_cpdo.c linux-user/arm/nwfpe/fpa11_cpdt.c linux-user/arm/nwfpe/fpa11_cprt.c linux-user/arm/nwfpe/fpa11.h linux-user/flat.h linux-user/flatload.c linux-user/i386/target_syscall.h linux-user/ppc/target_syscall.h linux-user/sparc/target_syscall.h linux-user/syscall.c linux-user/syscall_defs.h linux-user/x86_64/target_syscall.h slirp/cksum.c slirp/if.c slirp/ip.h slirp/ip_icmp.c slirp/ip_icmp.h slirp/ip_input.c slirp/ip_output.c slirp/mbuf.c slirp/misc.c slirp/sbuf.c slirp/socket.c slirp/socket.h slirp/tcp_input.c slirp/tcpip.h slirp/tcp_output.c slirp/tcp_subr.c slirp/tcp_timer.c slirp/tftp.c slirp/udp.c slirp/udp.h target/cris/cpu.h target/cris/mmu.c target/cris/op_helper.c target/sh4/helper.c target/sh4/op_helper.c target/sh4/translate.c tcg/sparc/tcg-target.inc.c tests/tcg/cris/check_addo.c tests/tcg/cris/check_moveq.c tests/tcg/cris/check_swap.c tests/tcg/multiarch/test-mmap.c ui/vnc-enc-hextile-template.h ui/vnc-enc-zywrle.h util/envlist.c util/readline.c The following have only TABs: bsd-user/i386/target_signal.h bsd-user/sparc64/target_signal.h bsd-user/sparc64/target_syscall.h bsd-user/sparc/target_signal.h bsd-user/sparc/target_syscall.h bsd-user/x86_64/target_signal.h crypto/desrfb.c hw/audio/intel-hda-defs.h hw/core/uboot_image.h hw/sh4/sh7750_regnames.c hw/sh4/sh7750_regs.h include/hw/cris/etraxfs_dma.h linux-user/alpha/termbits.h linux-user/arm/nwfpe/fpopcode.h linux-user/arm/nwfpe/fpsr.h linux-user/arm/syscall_nr.h linux-user/arm/target_signal.h linux-user/cris/target_signal.h linux-user/i386/target_signal.h linux-user/linux_loop.h linux-user/m68k/target_signal.h linux-user/microblaze/target_signal.h linux-user/mips64/target_signal.h linux-user/mips/target_signal.h linux-user/mips/target_syscall.h linux-user/mips/termbits.h linux-user/ppc/target_signal.h linux-user/sh4/target_signal.h linux-user/sh4/termbits.h linux-user/sparc64/target_syscall.h linux-user/sparc/target_signal.h linux-user/x86_64/target_signal.h linux-user/x86_64/termbits.h pc-bios/optionrom/optionrom.h slirp/mbuf.h slirp/misc.h slirp/sbuf.h slirp/tcp.h slirp/tcp_timer.h slirp/tcp_var.h target/i386/svm.h target/sparc/asi.h target/xtensa/core-dc232b/xtensa-modules.inc.c target/xtensa/core-dc233c/xtensa-modules.inc.c target/xtensa/core-de212/core-isa.h target/xtensa/core-de212/xtensa-modules.inc.c target/xtensa/core-fsf/xtensa-modules.inc.c target/xtensa/core-sample_controller/core-isa.h target/xtensa/core-sample_controller/xtensa-modules.inc.c target/xtensa/core-test_kc705_be/core-isa.h target/xtensa/core-test_kc705_be/xtensa-modules.inc.c tests/tcg/cris/check_abs.c tests/tcg/cris/check_addc.c tests/tcg/cris/check_addcm.c tests/tcg/cris/check_addoq.c tests/tcg/cris/check_bound.c tests/tcg/cris/check_ftag.c tests/tcg/cris/check_int64.c tests/tcg/cris/check_lz.c tests/tcg/cris/check_openpf5.c tests/tcg/cris/check_sigalrm.c tests/tcg/cris/crisutils.h tests/tcg/cris/sys.c tests/tcg/i386/test-i386-ssse3.c ui/vgafont.h Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20181213223737.11793-3-pbonzini@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qemu/queue.h: simplify reverse access to QTAILQPaolo Bonzini2019-01-111-1/+1
| | | | | | | The new definition of QTAILQ does not require passing the headname, remove it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2025-01-24 12:16:58 +0100