summaryrefslogtreecommitdiffstats
path: root/include/block
Commit message (Collapse)AuthorAgeFilesLines
...
* qapi: block-stream: add "bottom" argumentVladimir Sementsov-Ogievskiy2021-01-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The code already don't freeze base node and we try to make it prepared for the situation when base node is changed during the operation. In other words, block-stream doesn't own base node. Let's introduce a new interface which should replace the current one, which will in better relations with the code. Specifying bottom node instead of base, and requiring it to be non-filter gives us the following benefits: - drop difference between above_base and base_overlay, which will be renamed to just bottom, when old interface dropped - clean way to work with parallel streams/commits on the same backing chain, which otherwise become a problem when we introduce a filter for stream job - cleaner interface. Nobody will surprised the fact that base node may disappear during block-stream, when there is no word about "base" in the interface. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20201216061703.70908-11-vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
* copy-on-read: skip non-guest reads if no copy neededAndrey Shinkevich2021-01-261-3/+5
| | | | | | | | | | | | | | | | | | | | If the flag BDRV_REQ_PREFETCH was set, skip idling read/write operations in COR-driver. It can be taken into account for the COR-algorithms optimization. That check is being made during the block stream job by the moment. Add the BDRV_REQ_PREFETCH flag to the supported_read_flags of the COR-filter. block: Modify the comment for the flag BDRV_REQ_PREFETCH as we are going to use it alone and pass it to the COR-filter driver for further processing. Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20201216061703.70908-9-vsementsov@virtuozzo.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
* block: include supported_read_flags into BDS structureAndrey Shinkevich2021-01-261-0/+4
| | | | | | | | | | | | | | | Add the new member supported_read_flags to the BlockDriverState structure. It will control the flags set for copy-on-read operations. Make the block generic layer evaluate supported read flags before they go to a block driver. Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [vsementsov: use assert instead of abort] Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20201216061703.70908-8-vsementsov@virtuozzo.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
* qapi: add filter-node-name to block-streamAndrey Shinkevich2021-01-261-1/+6
| | | | | | | | | | | | | Provide the possibility to pass the 'filter-node-name' parameter to the block-stream job as it is done for the commit block job. Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [vsementsov: comment indentation, s/Since: 5.2/Since: 6.0/] Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20201216061703.70908-5-vsementsov@virtuozzo.com> [mreitz: s/commit/stream/] Signed-off-by: Max Reitz <mreitz@redhat.com>
* block: add API function to insert a nodeAndrey Shinkevich2021-01-261-0/+2
| | | | | | | | | | | Provide API for insertion a node to backing chain. Suggested-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20201216061703.70908-3-vsementsov@virtuozzo.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
* block: introduce BDRV_REQ_NO_WAIT flagVladimir Sementsov-Ogievskiy2020-12-181-1/+8
| | | | | | | | | | | Add flag to make serialising request no wait: if there are conflicting requests, just return error immediately. It's will be used in upcoming preallocate filter. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20201021145859.11201-7-vsementsov@virtuozzo.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
* block: bdrv_mark_request_serialising: split non-waiting functionVladimir Sementsov-Ogievskiy2020-12-181-1/+2
| | | | | | | | | | | | | | | | | | We'll need a separate function, which will only "mark" request serialising with specified align but not wait for conflicting requests. So, it will be like old bdrv_mark_request_serialising(), before merging bdrv_wait_serialising_requests_locked() into it. To reduce the possible mess, let's do the following: Public function that does both marking and waiting will be called bdrv_make_request_serialising, and private function which will only "mark" will be called tracked_request_set_serialising(). Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20201021145859.11201-6-vsementsov@virtuozzo.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
* block: simplify comment to BDRV_REQ_SERIALISINGVladimir Sementsov-Ogievskiy2020-12-181-10/+1Star
| | | | | | | | | | | | | | | | | | 1. BDRV_REQ_NO_SERIALISING doesn't exist already, don't mention it. 2. We are going to add one more user of BDRV_REQ_SERIALISING, so comment about backup becomes a bit confusing here. The use case in backup is documented in block/backup.c, so let's just drop duplication here. 3. The fact that BDRV_REQ_SERIALISING is only for write requests is omitted. Add a note. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-Id: <20201021145859.11201-2-vsementsov@virtuozzo.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
* block: introduce BDRV_MAX_LENGTHVladimir Sementsov-Ogievskiy2020-12-112-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We are going to modify block layer to work with 64bit requests. And first step is moving to int64_t type for both offset and bytes arguments in all block request related functions. It's mostly safe (when widening signed or unsigned int to int64_t), but switching from uint64_t is questionable. So, let's first establish the set of requests we want to work with. First signed int64_t should be enough, as off_t is signed anyway. Then, obviously offset + bytes should not overflow. And most interesting: (offset + bytes) being aligned up should not overflow as well. Aligned to what alignment? First thing that comes in mind is bs->bl.request_alignment, as we align up request to this alignment. But there is another thing: look at bdrv_mark_request_serialising(). It aligns request up to some given alignment. And this parameter may be bdrv_get_cluster_size(), which is often a lot greater than bs->bl.request_alignment. Note also, that bdrv_mark_request_serialising() uses signed int64_t for calculations. So, actually, we already depend on some restrictions. Happily, bdrv_get_cluster_size() returns int and bs->bl.request_alignment has 32bit unsigned type, but defined to be a power of 2 less than INT_MAX. So, we may establish, that INT_MAX is absolute maximum for any kind of alignment that may occur with the request. Note, that bdrv_get_cluster_size() is not documented to return power of 2, still bdrv_mark_request_serialising() behaves like it is. Also, backup uses bdi.cluster_size and is not prepared to it not being power of 2. So, let's establish that Qemu supports only power-of-2 clusters and alignments. So, alignment can't be greater than 2^30. Finally to be safe with calculations, to not calculate different maximums for different nodes (depending on cluster size and request_alignment), let's simply set QEMU_ALIGN_DOWN(INT64_MAX, 2^30) as absolute maximum bytes length for Qemu. Actually, it's not much less than INT64_MAX. OK, then, let's apply it to block/io. Let's consider all block/io entry points of offset/bytes: 4 bytes/offset interface functions: bdrv_co_preadv_part(), bdrv_co_pwritev_part(), bdrv_co_copy_range_internal() and bdrv_co_pdiscard() and we check them all with bdrv_check_request(). We also have one entry point with only offset: bdrv_co_truncate(). Check the offset. And one public structure: BdrvTrackedRequest. Happily, it has only three external users: file-posix.c: adopted by this patch write-threshold.c: only read fields test-write-threshold.c: sets obviously small constant values Better is to make the structure private and add corresponding interfaces.. Still it's not obvious what kind of interface is needed for file-posix.c. Let's keep it public but add corresponding assertions. After this patch we'll convert functions in block/io.c to int64_t bytes and offset parameters. We can assume that offset/bytes pair always satisfy new restrictions, and make corresponding assertions where needed. If we reach some offset/bytes point in block/io.c missing bdrv_check_request() it is considered a bug. As well, if block/io.c modifies a offset/bytes request, expanding it more then aligning up to request_alignment, it's a bug too. For all io requests except for discard we keep for now old restriction of 32bit request length. iotest 206 output error message changed, as now test disk size is larger than new limit. Add one more test case with new maximum disk size to cover too-big-L1 case. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20201203222713.13507-5-vsementsov@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* fuse: Allow exporting BDSs via FUSEMax Reitz2020-12-111-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | block-export-add type=fuse allows mounting block graph nodes via FUSE on some existing regular file. That file should then appears like a raw disk image, and accesses to it result in accesses to the exported BDS. Right now, we only implement the necessary block export functions to set it up and shut it down. We do not implement any access functions, so accessing the mount point only results in errors. This will be addressed by a followup patch. We keep a hash table of exported mount points, because we want to be able to detect when users try to use a mount point twice. This is because we invoke stat() to check whether the given mount point is a regular file, but if that file is served by ourselves (because it is already used as a mount point), then this stat() would have to be served by ourselves, too, which is impossible to do while we (as the caller) are waiting for it to settle. Therefore, keep track of mount point paths to at least catch the most obvious instances of that problem. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20201027190600.192171-3-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* Merge remote-tracking branch ↵Peter Maydell2020-11-231-6/+12
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/stefanha-gitlab/tags/block-pull-request' into staging Pull request for 5.2 NVMe fixes to solve IOMMU issues on non-x86 and error message/tracing improvements. Elena Afanasova's ioeventfd fixes are also included. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> # gpg: Signature made Wed 04 Nov 2020 15:18:16 GMT # gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full] # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full] # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha-gitlab/tags/block-pull-request: (33 commits) util/vfio-helpers: Assert offset is aligned to page size util/vfio-helpers: Convert vfio_dump_mapping to trace events util/vfio-helpers: Improve DMA trace events util/vfio-helpers: Trace where BARs are mapped util/vfio-helpers: Trace PCI BAR region info util/vfio-helpers: Trace PCI I/O config accesses util/vfio-helpers: Improve reporting unsupported IOMMU type block/nvme: Fix nvme_submit_command() on big-endian host block/nvme: Fix use of write-only doorbells page on Aarch64 arch block/nvme: Align iov's va and size on host page size block/nvme: Change size and alignment of prp_list_pages block/nvme: Change size and alignment of queue block/nvme: Change size and alignment of IDENTIFY response buffer block/nvme: Correct minimum device page size block/nvme: Set request_alignment at initialization block/nvme: Simplify nvme_cmd_sync() block/nvme: Simplify ADMIN queue access block/nvme: Correctly initialize Admin Queue Attributes block/nvme: Use definitions instead of magic values in add_io_queue() block/nvme: Introduce Completion Queue definitions ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * block/nvme: Introduce Completion Queue definitionsPhilippe Mathieu-Daudé2020-11-031-6/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename Submission Queue flags with 'Sq' to differentiate submission queue flags from command queue flags, and introduce Completion Queue flag definitions. Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20201029093306.1063879-13-philmd@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com>
* | block: Move bdrv_drain_all_end_quiesce() to block_int.hGreg Kurz2020-11-092-6/+9
|/ | | | | | | | | | This function is really an internal helper for bdrv_close(). Update its doc comment to make this clear and make the function private. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <160387245480.131299.13430357162209598411.stgit@bahia> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
* Merge remote-tracking branch 'remotes/nvme/tags/pull-nvme-20201102' into stagingPeter Maydell2020-11-021-3/+15
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | nvme pull 2 Nov 2020 # gpg: Signature made Mon 02 Nov 2020 15:20:30 GMT # gpg: using RSA key DBC11D2D373B4A3755F502EC625156610A4F6CC0 # gpg: Good signature from "Keith Busch <kbusch@kernel.org>" [unknown] # gpg: aka "Keith Busch <keith.busch@gmail.com>" [unknown] # gpg: aka "Keith Busch <keith.busch@intel.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: DBC1 1D2D 373B 4A37 55F5 02EC 6251 5661 0A4F 6CC0 * remotes/nvme/tags/pull-nvme-20201102: (30 commits) hw/block/nvme: fix queue identifer validation hw/block/nvme: fix create IO SQ/CQ status codes hw/block/nvme: fix prp mapping status codes hw/block/nvme: report actual LBA data shift in LBAF hw/block/nvme: add trace event for requests with non-zero status code hw/block/nvme: add nsid to get/setfeat trace events hw/block/nvme: reject io commands if only admin command set selected hw/block/nvme: support for admin-only command set hw/block/nvme: validate command set selected hw/block/nvme: support per-namespace smart log hw/block/nvme: fix log page offset check hw/block/nvme: remove pointless rw indirection hw/block/nvme: update nsid when registered hw/block/nvme: change controller pci id pci: allocate pci id for nvme hw/block/nvme: support multiple namespaces hw/block/nvme: refactor identify active namespace id list hw/block/nvme: add support for sgl bit bucket descriptor hw/block/nvme: add support for scatter gather lists hw/block/nvme: harden cmb access ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * hw/block/nvme: fix prp mapping status codesGollu Appalanaidu2020-10-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Address 0 is not an invalid address. Remove those invalikd checks. Unaligned PRP2 and PRP list entries should result in Invalid PRP Offset status code and not Invalid Field. Fix that. See NVMe Express v1.3d, Section 4.3 ("Physical Region Page Entry and List"). Suggested-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Keith Busch <kbusch@kernel.org>
| * hw/block/nvme: reject io commands if only admin command set selectedKlaus Jensen2020-10-271-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | If the host sets CC.CSS to 111b, all commands submitted to I/O queues should be completed with status Invalid Command Opcode. Note that this is technically a v1.4 feature, but it does not hurt to implement before we finally bump the reported version implemented. Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
| * hw/block/nvme: support for admin-only command setKeith Busch2020-10-271-1/+2
| | | | | | | | | | Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
| * hw/block/nvme: validate command set selectedKeith Busch2020-10-271-0/+4
| | | | | | | | | | | | | | | | Fail to start the controller if the user requests a command set that the controller does not support. Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
| * hw/block/nvme: support per-namespace smart logKeith Busch2020-10-271-0/+1
| | | | | | | | | | | | | | | | Let the user specify a specific namespace if they want to get access stats for a specific namespace. Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
| * hw/block/nvme: add support for scatter gather listsKlaus Jensen2020-10-271-3/+3
| | | | | | | | | | | | | | | | | | | | For now, support the Data Block, Segment and Last Segment descriptor types. See NVM Express 1.3d, Section 4.4 ("Scatter Gather List (SGL)"). Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Keith Busch <kbusch@kernel.org>
* | nbd: Add new qemu:allocation-depth metadata contextEric Blake2020-10-301-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'qemu-img map' provides a way to determine which extents of an image come from the top layer vs. inherited from a backing chain. This is useful information worth exposing over NBD. There is a proposal to add a QMP command block-dirty-bitmap-populate which can create a dirty bitmap that reflects allocation information, at which point the qemu:dirty-bitmap:NAME metadata context can expose that information via the creation of a temporary bitmap, but we can shorten the effort by adding a new qemu:allocation-depth metadata context that does the same thing without an intermediate bitmap (this patch does not eliminate the need for that proposal, as it will have other uses as well). While documenting things, remember that although the NBD protocol has NBD_OPT_SET_META_CONTEXT, the rest of its documentation refers to 'metadata context', which is a more apt description of what is actually being used by NBD_CMD_BLOCK_STATUS: the user is requesting metadata by passing one or more context names. So I also touched up some existing wording to prefer the term 'metadata context' where it makes sense. Note that this patch does not actually enable any way to request a server to enable this context; that will come in the next patch. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20201027050556.269064-10-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
* | block: End quiescent sections when a BDS is deletedGreg Kurz2020-10-271-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a BDS gets deleted during blk_drain_all(), it might miss a call to bdrv_do_drained_end(). This means missing a call to aio_enable_external() and the AIO context remains disabled for ever. This can cause a device to become irresponsive and to disrupt the guest execution, ie. hang, loop forever or worse. This scenario is quite easy to encounter with virtio-scsi on POWER when punching multiple blockdev-create QMP commands while the guest is booting and it is still running the SLOF firmware. This happens because SLOF disables/re-enables PCI devices multiple times via IO/MEM/MASTER bits of PCI_COMMAND register after the initial probe/feature negotiation, as it tends to work with a single device at a time at various stages like probing and running block/network bootloaders without doing a full reset in-between. This naturally generates many dataplane stops and starts, and thus many drain sections that can race with blockdev_create_run(). In the end, SLOF bails out. It is somehow reproducible on x86 but it requires to generate articial dataplane start/stop activity with stop/cont QMP commands. In this case, seabios ends up looping for ever, waiting for the virtio-scsi device to send a response to a command it never received. Add a helper that pairs all previously called bdrv_do_drained_begin() with a bdrv_do_drained_end() and call it from bdrv_close(). While at it, update the "/bdrv-drain/graph-change/drain_all" test in test-bdrv-drain so that it can catch the issue. BugId: https://bugzilla.redhat.com/show_bug.cgi?id=1874441 Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <160346526998.272601.9045392804399803158.stgit@bahia.lan> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* | qcow2: Skip copy-on-write when allocating a zero clusterAlberto Garcia2020-10-271-0/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit c8bb23cbdbe32f5c326365e0a82e1b0e68cdcd8a when a write request results in a new allocation QEMU first tries to see if the rest of the cluster outside the written area contains only zeroes. In that case, instead of doing a normal copy-on-write operation and writing explicit zero buffers to disk, the code zeroes the whole cluster efficiently using pwrite_zeroes() with BDRV_REQ_NO_FALLBACK. This improves performance very significantly but it only happens when we are writing to an area that was completely unallocated before. Zero clusters (QCOW2_CLUSTER_ZERO_*) are treated like normal clusters and are therefore slower to allocate. This happens because the code uses bdrv_is_allocated_above() rather bdrv_block_status_above(). The former is not as accurate for this purpose but it is faster. However in the case of qcow2 the underlying call does already report zero clusters just fine so there is no reason why we cannot use that information. After testing 4KB writes on an image that only contains zero clusters this patch results in almost five times more IOPS. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <6d77cab968c501c44d6e1089b9bc91b04170b49e.1603731354.git.berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block: Add bdrv_lock()/unlock()Kevin Wolf2020-10-091-0/+14
| | | | | | | | | | | | | | | Inside of coroutine context, we can't directly use aio_context_acquire() for the AioContext of a block node because we already own the lock of the current AioContext and we need to avoid double locking to prevent deadlocks. This provides helper functions to lock the AioContext of a node only if it's not the same as the current AioContext. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201005155855.256490-14-kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
* block: Add bdrv_co_enter()/leave()Kevin Wolf2020-10-091-0/+17
| | | | | | | | | | Add a pair of functions to temporarily move the current coroutine to the AioContext of a given BlockDriverState. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201005155855.256490-13-kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
* util/async: Add aio_co_reschedule_self()Kevin Wolf2020-10-091-0/+10
| | | | | | | | | | | | | Add a function that can be used to move the currently running coroutine to a different AioContext (and therefore potentially a different thread). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20201005155855.256490-12-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
* Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into ↵Peter Maydell2020-10-061-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | staging * Reverse debugging (Pavel) * CFLAGS cleanup (Paolo) * ASLR fix (Mark) * cpus.c refactoring (Claudio) # gpg: Signature made Tue 06 Oct 2020 07:35:09 BST # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini-gitlab/tags/for-upstream: (37 commits) tests/acceptance: add reverse debugging test replay: create temporary snapshot at debugger connection replay: describe reverse debugging in docs/replay.txt gdbstub: add reverse continue support in replay mode gdbstub: add reverse step support in replay mode replay: flush rr queue before loading the vmstate replay: implement replay-seek command replay: introduce breakpoint at the specified step replay: introduce info hmp/qmp command qapi: introduce replay.json for record/replay-related stuff migration: introduce icount field for snapshots qcow2: introduce icount field for snapshots replay: provide an accessor for rr filename replay: don't record interrupt poll configure: don't enable ASLR for --enable-debug Windows builds configure: consistently pass CFLAGS/CXXFLAGS/LDFLAGS to meson configure: do not clobber environment CFLAGS/CXXFLAGS/LDFLAGS dtc: Convert Makefile bits to meson bits slirp: Convert Makefile bits to meson bits accel/tcg: use current_machine as it is always set for softmmu ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * migration: introduce icount field for snapshotsPavel Dovgalyuk2020-10-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Saving icount as a parameters of the snapshot allows navigation between them in the execution replay scenario. This information can be used for finding a specific snapshot for proceeding the recorded execution to the specific moment of the time. E.g., 'reverse step' action (introduced in one of the following patches) needs to load the nearest snapshot which is prior to the current moment of time. This patch also updates snapshot test which verifies qemu monitor output. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Kevin Wolf <kwolf@redhat.com> -- v4 changes: - squashed format update with test output update v7 changes: - introduced the spaces between the fields in snapshot info output - updated the test to match new field widths Message-Id: <160174518865.12451.14327573383978752463.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* | include/block/block.h: drop non-ascii quotation markVladimir Sementsov-Ogievskiy2020-10-051-1/+1
| | | | | | | | | | | | | | | | | | | | This is the only non-ascii character in the file and it doesn't really needed here. Let's use normal "'" symbol for consistency with the rest 11 occurrences of "'" in the file. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* | block/io: refactor save/load vmstateVladimir Sementsov-Ogievskiy2020-10-051-2/+4
| | | | | | | | | | | | | | | | | | | | | | Like for read/write in a previous commit, drop extra indirection layer, generate directly bdrv_readv_vmstate() and bdrv_writev_vmstate(). Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20200924185414.28642-8-vsementsov@virtuozzo.com>
* | block: drop bdrv_prwvVladimir Sementsov-Ogievskiy2020-10-051-2/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we are not maintaining boilerplate code for coroutine wrappers, there is no more sense in keeping the extra indirection layer of bdrv_prwv(). Let's drop it and instead generate pure bdrv_preadv() and bdrv_pwritev(). Currently, bdrv_pwritev() and bdrv_preadv() are returning bytes on success, auto generated functions will instead return zero, as their _co_ prototype. Still, it's simple to make the conversion safe: the only external user of bdrv_pwritev() is test-bdrv-drain, and it is comfortable enough with bdrv_co_pwritev() instead. So prototypes are moved to local block/coroutines.h. Next, the only internal use is bdrv_pread() and bdrv_pwrite(), which are modified to return bytes on success. Of course, it would be great to convert bdrv_pread() and bdrv_pwrite() to return 0 on success. But this requires audit (and probably conversion) of all their users, let's leave it for another day refactoring. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20200924185414.28642-7-vsementsov@virtuozzo.com>
* | block: generate coroutine-wrapper codeVladimir Sementsov-Ogievskiy2020-10-051-6/+10
| | | | | | | | | | | | | | | | | | | | | | Use code generation implemented in previous commit to generated coroutine wrappers in block.c and block/io.c Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20200924185414.28642-6-vsementsov@virtuozzo.com>
* | scripts: add block-coroutine-wrapper.pyVladimir Sementsov-Ogievskiy2020-10-051-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have a very frequent pattern of creating a coroutine from a function with several arguments: - create a structure to pack parameters - create _entry function to call original function taking parameters from struct - do different magic to handle completion: set ret to NOT_DONE or EINPROGRESS or use separate bool field - fill the struct and create coroutine from _entry function with this struct as a parameter - do coroutine enter and BDRV_POLL_WHILE loop Let's reduce code duplication by generating coroutine wrappers. This patch adds scripts/block-coroutine-wrapper.py together with some friends, which will generate functions with declared prototypes marked by the 'generated_co_wrapper' specifier. The usage of new code generation is as follows: 1. define the coroutine function somewhere int coroutine_fn bdrv_co_NAME(...) {...} 2. declare in some header file int generated_co_wrapper bdrv_NAME(...); with same list of parameters (generated_co_wrapper is defined in "include/block/block.h"). 3. Make sure the block_gen_c declaration in block/meson.build mentions the file with your marker function. Still, no function is now marked, this work is for the following commit. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200924185414.28642-5-vsementsov@virtuozzo.com> [Added encoding='utf-8' to open() calls as requested by Vladimir. Fixed typo and grammar issues pointed out by Eric Blake. Removed clang-format dependency that caused build test issues. --Stefan] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* | block: return error-code from bdrv_invalidate_cacheVladimir Sementsov-Ogievskiy2020-10-051-1/+1
|/ | | | | | | | | | | | | | | | | | | | | This is the only coroutine wrapper from block.c and block/io.c which doesn't return a value, so let's convert it to the common behavior, to simplify moving to generated coroutine wrappers in a further commit. Also, bdrv_invalidate_cache is a void function, returning error only through **errp parameter, which is considered to be bad practice, as it forces callers to define and propagate local_err variable, so conversion is good anyway. This patch leaves the conversion of .bdrv_co_invalidate_cache() driver callbacks and bdrv_invalidate_cache_all() for another day. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20200924185414.28642-2-vsementsov@virtuozzo.com>
* nbd: Merge nbd_export_new() and nbd_export_create()Kevin Wolf2020-10-021-6/+1Star
| | | | | | | | | | | | | | | | | | | | There is no real reason any more why nbd_export_new() and nbd_export_create() should be separate functions. The latter only performs a few checks before it calls the former. What makes the current state stand out is that it's the only function in BlockExportDriver that is not a static function inside nbd/server.c, but a small wrapper in blockdev-nbd.c that then calls back into nbd/server.c for the real functionality. Move all the checks to nbd/server.c and make the resulting function static to improve readability. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-27-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block/export: Create BlockBackend in blk_exp_add()Kevin Wolf2020-10-021-2/+2
| | | | | | | | | | | Every export type will need a BlockBackend, so creating it centrally in blk_exp_add() instead of the .create driver callback avoids duplication. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-24-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block/export: Move blk to BlockExportKevin Wolf2020-10-021-0/+3
| | | | | | | | | | | Every block export has a BlockBackend representing the disk that is exported. It should live in BlockExport therefore. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-23-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block/export: Add block-export-delKevin Wolf2020-10-022-1/+1
| | | | | | | | | | | Implement a new QMP command block-export-del and make nbd-server-remove a wrapper around it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-21-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block/export: Move strong user reference to block_exportsKevin Wolf2020-10-021-0/+8
| | | | | | | | | | | | | | | | | | | | | | The reference owned by the user/monitor that is created when adding the export and dropped when removing it was tied to the 'exports' list in nbd/server.c. Every block export will have a user reference, so move it to the block export level and tie it to the 'block_exports' list in block/export/export.c instead. This is necessary for introducing a QMP command for removing exports. Note that exports are present in block_exports even after the user has requested shutdown. This is different from NBD's exports where exports are immediately removed on a shutdown request, even if they are still in the process of shutting down. In order to avoid that the user still interacts with an export that is shutting down (and possibly removes it a second time), we need to remember if the user actually still owns it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-20-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block/export: Add 'id' option to block-export-addKevin Wolf2020-10-021-0/+3
| | | | | | | | | | | | | | | | | | We'll need an id to identify block exports in monitor commands. This adds one. Note that this is different from the 'name' option in the NBD server, which is the externally visible export name. While block export ids need to be unique in the whole process, export names must be unique only for the same server. Different export types or (potentially in the future) multiple NBD servers can have the same export name externally, but still need different block export ids internally. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-19-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block/export: Add blk_exp_close_all(_type)Kevin Wolf2020-10-022-2/+15
| | | | | | | | | | | | | | | | | This adds a function to shut down all block exports, and another one to shut down the block exports of a single type. The latter is used for now when stopping the NBD server. As soon as we implement support for multiple NBD servers, we'll need a per-server list of exports and it will be replaced by a function using that. As a side effect, the BlockExport layer has a list tracking all existing exports now. closed_exports loses its only user and can go away. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-18-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block/export: Allocate BlockExport in blk_exp_add()Kevin Wolf2020-10-022-6/+13
| | | | | | | | | | | | | | | | Instead of letting the driver allocate and return the BlockExport object, allocate it already in blk_exp_add() and pass it. This allows us to initialise the generic part before calling into the driver so that the driver can just use these values instead of having to parse the options a second time. For symmetry, move freeing the BlockExport to blk_exp_unref(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-17-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block/export: Move AioContext from NBDExport to BlockExportKevin Wolf2020-10-021-0/+3
| | | | | | | | Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-15-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block/export: Move refcount from NBDExport to BlockExportKevin Wolf2020-10-022-2/+15
| | | | | | | | | | | | Having a refcount makes sense for all types of block exports. It is also a prerequisite for keeping a list of all exports at the BlockExport level. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-14-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qemu-nbd: Use blk_exp_add() to create the exportKevin Wolf2020-10-021-0/+1
| | | | | | | | | | | | | | | | With this change, NBD exports are now only created through the BlockExport interface. This allows us finally to move things from the NBD layer to the BlockExport layer if they make sense for other export types, too. blk_exp_add() returns only a weak reference, so the explicit nbd_export_put() goes away. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-12-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* nbd: Remove NBDExport.close callbackKevin Wolf2020-10-021-2/+1Star
| | | | | | | | | | | | | | | | | The export close callback is unused by the built-in NBD server. qemu-nbd uses it only during shutdown to wait for the unrefed export to actually go away. It can just use nbd_export_close_all() instead and do without the callback. This removes the close callback from nbd_export_new() and makes both callers of it more similar. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200924152717.287415-11-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* nbd: Add max-connections to nbd-server-startKevin Wolf2020-10-021-1/+2
| | | | | | | | | | | | This is a QMP equivalent of qemu-nbd's --shared option, limiting the maximum number of clients that can attach at the same time. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200924152717.287415-9-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block/export: Remove magic from block-export-addKevin Wolf2020-10-022-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | nbd-server-add tries to be convenient and adds two questionable features that we don't want to share in block-export-add, even for NBD exports: 1. When requesting a writable export of a read-only device, the export is silently downgraded to read-only. This should be an error in the context of block-export-add. 2. When using a BlockBackend name, unplugging the device from the guest will automatically stop the NBD server, too. This may sometimes be what you want, but it could also be very surprising. Let's keep things explicit with block-export-add. If the user wants to stop the export, they should tell us so. Move these things into the nbd-server-add QMP command handler so that they apply only there. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-8-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qemu-nbd: Use raw block driver for --offsetKevin Wolf2020-10-021-2/+2
| | | | | | | | | | | | | | | | | | | Instead of implementing qemu-nbd --offset in the NBD code, just put a raw block node with the requested offset on top of the user image and rely on that doing the job. This does not only simplify the nbd_export_new() interface and bring it closer to the set of options that the nbd-server-add QMP command offers, but in fact it also eliminates a potential source for bugs in the NBD code which previously had to add the offset manually in all relevant places. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200924152717.287415-7-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block/export: Add BlockExport infrastructure and block-export-addKevin Wolf2020-10-022-1/+37
| | | | | | | | | | | | | | | | | | We want to have a common set of commands for all types of block exports. Currently, this is only NBD, but we're going to add more types. This patch adds the basic BlockExport and BlockExportDriver structs and a QMP command block-export-add that creates a new export based on the given BlockExportOptions. qmp_nbd_server_add() becomes a wrapper around qmp_block_export_add(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-5-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-12-22 14:10:42 +0100