summaryrefslogtreecommitdiffstats
path: root/include/hw/acpi
Commit message (Collapse)AuthorAgeFilesLines
* piix4: Add a MC146818 RTC Controller as specified in datasheetPhilippe Mathieu-Daudé2019-11-051-6/+0Star
| | | | | | | | | | | | Remove mc146818rtc instanciated in malta board, to not have it twice. Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <20171216090228.28505-13-hpoussin@reactos.org> [PMD: rebased, set RTC base_year to 2000] Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* hw/arm: Use GED for system_powerdown eventShameer Kolothum2019-10-052-0/+4
| | | | | | | | | | | | | For machines 4.2 or higher with ACPI boot use GED for system_powerdown event instead of GPIO. Guest boot with DT still uses GPIO. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20190918130633.4872-9-shameerali.kolothum.thodi@huawei.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* hw/acpi: Add ACPI Generic Event Device SupportSamuel Ortiz2019-10-051-0/+100
| | | | | | | | | | | | | | | | | | | | | | | | | | The ACPI Generic Event Device (GED) is a hardware-reduced specific device[ACPI v6.1 Section 5.6.9] that handles all platform events, including the hotplug ones. This patch generates the AML code that defines GEDs. Platforms need to specify their own GED Event bitmap to describe what kind of events they want to support through GED. Also this uses a a single interrupt for the GED device, relying on IO memory region to communicate the type of device affected by the interrupt. This way, we can support up to 32 events with a unique interrupt. This supports only memory hotplug for now. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20190918130633.4872-4-shameerali.kolothum.thodi@huawei.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
* hw/acpi: Make ACPI IO address space configurableShameer Kolothum2019-10-051-2/+7
| | | | | | | | | | | | | | | | | | | | This is in preparation for adding support for ARM64 platforms where it doesn't use port mapped IO for ACPI IO space. We are making changes so that MMIO region can be accommodated and board can pass the base address into the aml build function. Also move few MEMORY_* definitions to header so that other memory hotplug event signalling mechanisms (eg. Generic Event Device on HW-reduced acpi platforms) can use the same from their respective event handler code. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20190918130633.4872-2-shameerali.kolothum.thodi@huawei.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* ipmi: Fix SSIF ACPI handling to use the right CRSCorey Minyard2019-09-201-1/+1
| | | | | | | | Pass in the CRS so that it can be set to the SMBus for IPMI later. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
* acpi: Add i2c serial bus CRS handlingCorey Minyard2019-09-201-0/+18
| | | | | | | | | This will be required for getting IPMI SSIF (SMBus interface) into the ACPI tables. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
* numa: move numa global variable nb_numa_nodes into MachineStateTao Xu2019-09-031-1/+1
| | | | | | | | | | | | | | Add struct NumaState in MachineState and move existing numa global nb_numa_nodes(renamed as "num_nodes") into NumaState. And add variable numa_support into MachineClass to decide which submachines support NUMA. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20190809065731.9097-3-tao3.xu@intel.com> [ehabkost: include hw/boards.h again to fix build failures] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* Include hw/qdev-properties.h lessMarkus Armbruster2019-08-162-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
* Include migration/vmstate.h lessMarkus Armbruster2019-08-161-1/+0Star
| | | | | | | | | | | | | | | | | | In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary. Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* Include hw/irq.h a lot lessMarkus Armbruster2019-08-161-1/+0Star
| | | | | | | | | | | | | | | | | | | In my "build everything" tree, changing hw/irq.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get qemu_irq and.or qemu_irq_handler. Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to qemu/typedefs.h, and then include hw/irq.h only where it's still needed. Touching it now recompiles only some 500 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-13-armbru@redhat.com>
* Include generated QAPI headers lessMarkus Armbruster2019-08-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some of the generated qapi-types-MODULE.h are included all over the place. Changing a QAPI type can trigger massive recompiling. Top scorers recompile more than 1000 out of some 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h): 6300 qapi/qapi-builtin-types.h 5700 qapi/qapi-types-run-state.h 3900 qapi/qapi-types-common.h 3300 qapi/qapi-types-sockets.h 3000 qapi/qapi-types-misc.h 3000 qapi/qapi-types-crypto.h 3000 qapi/qapi-types-job.h 3000 qapi/qapi-types-block-core.h 2800 qapi/qapi-types-block.h 1300 qapi/qapi-types-net.h Clean up headers to include generated QAPI headers only where needed. Impact is negligible except for hw/qdev-properties.h. This header includes qapi/qapi-types-block.h and qapi/qapi-types-misc.h. They are used only in expansions of property definition macros such as DEFINE_PROP_BLOCKDEV_ON_ERROR() and DEFINE_PROP_OFF_AUTO(). Moving their inclusion from hw/qdev-properties.h to the users of these macros avoids pointless recompiles. This is how other property definition macros, such as DEFINE_PROP_NETDEV(), already work. Improves things for some of the top scorers: 3600 qapi/qapi-types-common.h 2800 qapi/qapi-types-sockets.h 900 qapi/qapi-types-misc.h 2200 qapi/qapi-types-crypto.h 2100 qapi/qapi-types-job.h 2100 qapi/qapi-types-block-core.h 270 qapi/qapi-types-block.h Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-3-armbru@redhat.com>
* include: Make headers more self-containedMarkus Armbruster2019-08-162-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Back in 2016, we discussed[1] rules for headers, and these were generally liked: 1. Have a carefully curated header that's included everywhere first. We got that already thanks to Peter: osdep.h. 2. Headers should normally include everything they need beyond osdep.h. If exceptions are needed for some reason, they must be documented in the header. If all that's needed from a header is typedefs, put those into qemu/typedefs.h instead of including the header. 3. Cyclic inclusion is forbidden. This patch gets include/ closer to obeying 2. It's actually extracted from my "[RFC] Baby steps towards saner headers" series[2], which demonstrates a possible path towards checking 2 automatically. It passes the RFC test there. [1] Message-ID: <87h9g8j57d.fsf@blackfin.pond.sub.org> https://lists.nongnu.org/archive/html/qemu-devel/2016-03/msg03345.html [2] Message-Id: <20190711122827.18970-1-armbru@redhat.com> https://lists.nongnu.org/archive/html/qemu-devel/2019-07/msg02715.html Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-2-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* hw/acpi: extract acpi_add_rom_blob()Wei Yang2019-06-161-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | arm and i386 has almost the same function acpi_add_rom_blob(), except giving different FWCfgCallback function. This patch moves acpi_add_rom_blob() to utils.c by passing FWCfgCallback to it. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> v7: * rebase on top of current master because of conflict v6: * change author from Igor to Michael v5: * remove unnecessary header glib/gprintf.h * rearrange include header to make it more suitable v4: * extract -> moves * adjust comment in source to make checkpatch happy v3: * put acpi_add_rom_blob() to hw/acpi/utils.c v2: * remove unused header in original source file Message-Id: <20190610011830.28398-1-richardw.yang@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Include qemu-common.h exactly where neededMarkus Armbruster2019-06-121-1/+0Star
| | | | | | | | | | | | | | | | No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
* acpi: pci: use build_append_foo() API to construct MCFGWei Yang2019-05-301-18/+0Star
| | | | | | | | | | | | | | | | | | | | | build_append_foo() API doesn't need explicit endianness conversions which eliminates a source of errors and it makes build_mcfg() look like declarative definition of MCFG table in ACPI spec, which makes it easy to review. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> v3: * add some comment on the Configuration Space base address allocation structure v2: * miss the reserved[8] of MCFG in last version, add it back * drop SOBs and make sure bios-tables-test all OK Message-Id: <20190521062836.6541-3-richardw.yang@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* hw/acpi: Consolidate build_mcfg to pci.cWei Yang2019-05-301-0/+1
| | | | | | | | | | | | | | | | | | Now we have two identical build_mcfg functions. Consolidate them in acpi/pci.c. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> v4: * ACPI_PCI depends on both ACPI and PCI * rebase on latest master, adjust arm Kconfig v3: * adjust changelog based on Igor's suggestion Message-Id: <20190521062836.6541-2-richardw.yang@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* hw/arm/virt-acpi-build: pass AcpiMcfgInfo to build_mcfg()Wei Yang2019-05-211-0/+33
| | | | | | | | | | | | | | | | | | To build MCFG, two information is necessary: * bus number * base address Abstract these two information to AcpiMcfgInfo so that build_mcfg and build_mcfg_q35 will have the same declaration. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20190419003053.8260-5-richardw.yang@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* hw/i386/acpi: Add object_resolve_type_unambiguous to improve modularityPhilippe Mathieu-Daudé2019-05-171-2/+0Star
| | | | | | | | | | | | | | | | | | | | | | | When building with CONFIG_Q35=n, we get: LINK x86_64-softmmu/qemu-system-x86_64 /usr/bin/ld: hw/i386/acpi-build.o: in function `acpi_get_misc_info': /source/qemu/hw/i386/acpi-build.c:243: undefined reference to `ich9_lpc_find' collect2: error: ld returned 1 exit status make[1]: *** [Makefile:204: qemu-system-x86_64] Error 1 This is due to a dependency in acpi-build.c on the ICH9_LPC (via ich9_lpc_find) and PIIX4_PM (via piix4_pm_find) devices. To allow better modularity (compile acpi-build.c with only Q35/ICH9 or ISAPC/PIIX4), refactor the similar helper as object_resolve_type_unambiguous(). This way we relax the linker dependencies and can build the x86 targets with a selection of machines (instead of all of them). Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190427144025.22880-3-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* hw/acpi/piix4: Move TYPE_PIIX4_PM to a public headerPhilippe Mathieu-Daudé2019-05-171-0/+2
| | | | | | | | | Move the TYPE_PIIX4_PM definition to the corresponding header, so other files can use it. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190427144025.22880-2-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* i386, acpi: check acpi_memory_hotplug capacity in pre_plugWei Yang2019-03-131-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we do device realization like below: hotplug_handler_pre_plug() dc->realize() hotplug_handler_plug() Before we do device realization and plug, we should allocate necessary resources and check if memory-hotplug-support property is enabled. At the piix4 and ich9, the memory-hotplug-support property is checked at plug stage. This means that device has been realized and mapped into guest address space 'pc_dimm_plug()' by the time acpi plug handler is called, where it might fail and crash QEMU due to reaching g_assert_not_reached() (piix4) or error_abort (ich9). Fix it by checking if memory hotplug is enabled at pre_plug stage where we can gracefully abort hotplug request. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> CC: Igor Mammedov <imammedo@redhat.com> CC: Eric Blake <eblake@redhat.com> Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Message-Id: <20190301033548.6691-1-richardw.yang@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* hw/acpi: remove unused function acpi_table_add_builtin()Wei Yang2019-03-061-1/+0Star
| | | | | | | | | | | | | Function acpi_table_add_builtin() is not used anymore. Remove the definition and declaration. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20190214084939.20640-3-richardw.yang@linux.intel.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* typo: apci->acpiDr. David Alan Gilbert2019-01-301-1/+1
| | | | | | | | | | apci_1_compatible should be acpi_1_compatible. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190125094047.22276-1-dgilbert@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* hw/arm/virt-acpi-build: Set COHACC override flag in IORT SMMUv3 nodeEric Auger2019-01-211-0/+2
| | | | | | | | | | | | | | | | Let's report IO-coherent access is supported for translation table walks, descriptor fetches and queues by setting the COHACC override flag. Without that, we observe wrong command opcodes. The DT description also advertises the dma coherency. Fixes a703b4f6c1ee ("hw/arm/virt-acpi-build: Add smmuv3 node in IORT table") Signed-off-by: Eric Auger <eric.auger@redhat.com> Reported-by: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20190107101041.765-1-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/acpi: Use QEMU_NONSTRING for non NUL-terminated arraysPhilippe Mathieu-Daudé2019-01-181-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | GCC 8 added a -Wstringop-truncation warning: The -Wstringop-truncation warning added in GCC 8.0 via r254630 for bug 81117 is specifically intended to highlight likely unintended uses of the strncpy function that truncate the terminating NUL character from the source string. This new warning leads to compilation failures: CC hw/acpi/core.o In function 'acpi_table_install', inlined from 'acpi_table_add' at qemu/hw/acpi/core.c:296:5: qemu/hw/acpi/core.c:184:9: error: 'strncpy' specified bound 4 equals destination size [-Werror=stringop-truncation] strncpy(ext_hdr->sig, hdrs->sig, sizeof ext_hdr->sig); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ make: *** [qemu/rules.mak:69: hw/acpi/core.o] Error 1 Use the QEMU_NONSTRING attribute, since ACPI tables don't require the strings to be NUL-terminated. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* acpi: build TPM Physical Presence interfaceStefan Berger2019-01-181-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TPM Physical Presence interface consists of an ACPI part, a shared memory part, and code in the firmware. Users can send messages to the firmware by writing a code into the shared memory through invoking the ACPI code. When a reboot happens, the firmware looks for the code and acts on it by sending sequences of commands to the TPM. This patch adds the ACPI code. It is similar to the one in EDK2 but doesn't assume that SMIs are necessary to use. It uses a similar datastructure for the shared memory as EDK2 does so that EDK2 and SeaBIOS could both make use of it. I extended the shared memory data structure with an array of 256 bytes, one for each code that could be implemented. The array contains flags describing the individual codes. This decouples the ACPI implementation from the firmware implementation. The underlying TCG specification is accessible from the following page. https://trustedcomputinggroup.org/tcg-physical-presence-interface-specification/ This patch implements version 1.30. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> [ Marc-André - ACPI code improvements and windows fixes ] Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* acpi: expose TPM/PPI configuration parameters to firmware via fw_cfgStefan Berger2019-01-181-0/+3
| | | | | | | | | | | | | | | | | To avoid having to hard code the base address of the PPI virtual memory device we introduce a fw_cfg file etc/tpm/config that holds the base address of the PPI device, the version of the PPI interface and the version of the attached TPM. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> [ Marc-André: renamed to etc/tpm/config, made it static, document it ] Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* tpm: allocate/map buffer for TPM Physical Presence interfaceStefan Berger2019-01-181-0/+6
| | | | | | | | | | | | | | | | | | | | | | | Implement a virtual memory device for the TPM Physical Presence interface. The memory is located at 0xFED45000 and used by ACPI to send messages to the firmware (BIOS) and by the firmware to provide parameters for each one of the supported codes. This interface should be used by all TPM devices on x86 and can be added by calling tpm_ppi_init_io(). Note: bios_linker cannot be used to allocate the PPI memory region, since the reserved memory should stay stable across reboots, and might be needed before the ACPI tables are installed. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* avoid TABs in files that only contain a fewPaolo Bonzini2019-01-111-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most files that have TABs only contain a handful of them. Change them to spaces so that we don't confuse people. disas, standard-headers, linux-headers and libdecnumber are imported from other projects and probably should be exempted from the check. Outside those, after this patch the following files still contain both 8-space and TAB sequences at the beginning of the line. Many of them have a majority of TABs, or were initially committed with all tabs. bsd-user/i386/target_syscall.h bsd-user/x86_64/target_syscall.h crypto/aes.c hw/audio/fmopl.c hw/audio/fmopl.h hw/block/tc58128.c hw/display/cirrus_vga.c hw/display/xenfb.c hw/dma/etraxfs_dma.c hw/intc/sh_intc.c hw/misc/mst_fpga.c hw/net/pcnet.c hw/sh4/sh7750.c hw/timer/m48t59.c hw/timer/sh_timer.c include/crypto/aes.h include/disas/bfd.h include/hw/sh4/sh.h libdecnumber/decNumber.c linux-headers/asm-generic/unistd.h linux-headers/linux/kvm.h linux-user/alpha/target_syscall.h linux-user/arm/nwfpe/double_cpdo.c linux-user/arm/nwfpe/fpa11_cpdt.c linux-user/arm/nwfpe/fpa11_cprt.c linux-user/arm/nwfpe/fpa11.h linux-user/flat.h linux-user/flatload.c linux-user/i386/target_syscall.h linux-user/ppc/target_syscall.h linux-user/sparc/target_syscall.h linux-user/syscall.c linux-user/syscall_defs.h linux-user/x86_64/target_syscall.h slirp/cksum.c slirp/if.c slirp/ip.h slirp/ip_icmp.c slirp/ip_icmp.h slirp/ip_input.c slirp/ip_output.c slirp/mbuf.c slirp/misc.c slirp/sbuf.c slirp/socket.c slirp/socket.h slirp/tcp_input.c slirp/tcpip.h slirp/tcp_output.c slirp/tcp_subr.c slirp/tcp_timer.c slirp/tftp.c slirp/udp.c slirp/udp.h target/cris/cpu.h target/cris/mmu.c target/cris/op_helper.c target/sh4/helper.c target/sh4/op_helper.c target/sh4/translate.c tcg/sparc/tcg-target.inc.c tests/tcg/cris/check_addo.c tests/tcg/cris/check_moveq.c tests/tcg/cris/check_swap.c tests/tcg/multiarch/test-mmap.c ui/vnc-enc-hextile-template.h ui/vnc-enc-zywrle.h util/envlist.c util/readline.c The following have only TABs: bsd-user/i386/target_signal.h bsd-user/sparc64/target_signal.h bsd-user/sparc64/target_syscall.h bsd-user/sparc/target_signal.h bsd-user/sparc/target_syscall.h bsd-user/x86_64/target_signal.h crypto/desrfb.c hw/audio/intel-hda-defs.h hw/core/uboot_image.h hw/sh4/sh7750_regnames.c hw/sh4/sh7750_regs.h include/hw/cris/etraxfs_dma.h linux-user/alpha/termbits.h linux-user/arm/nwfpe/fpopcode.h linux-user/arm/nwfpe/fpsr.h linux-user/arm/syscall_nr.h linux-user/arm/target_signal.h linux-user/cris/target_signal.h linux-user/i386/target_signal.h linux-user/linux_loop.h linux-user/m68k/target_signal.h linux-user/microblaze/target_signal.h linux-user/mips64/target_signal.h linux-user/mips/target_signal.h linux-user/mips/target_syscall.h linux-user/mips/termbits.h linux-user/ppc/target_signal.h linux-user/sh4/target_signal.h linux-user/sh4/termbits.h linux-user/sparc64/target_syscall.h linux-user/sparc/target_signal.h linux-user/x86_64/target_signal.h linux-user/x86_64/termbits.h pc-bios/optionrom/optionrom.h slirp/mbuf.h slirp/misc.h slirp/sbuf.h slirp/tcp.h slirp/tcp_timer.h slirp/tcp_var.h target/i386/svm.h target/sparc/asi.h target/xtensa/core-dc232b/xtensa-modules.inc.c target/xtensa/core-dc233c/xtensa-modules.inc.c target/xtensa/core-de212/core-isa.h target/xtensa/core-de212/xtensa-modules.inc.c target/xtensa/core-fsf/xtensa-modules.inc.c target/xtensa/core-sample_controller/core-isa.h target/xtensa/core-sample_controller/xtensa-modules.inc.c target/xtensa/core-test_kc705_be/core-isa.h target/xtensa/core-test_kc705_be/xtensa-modules.inc.c tests/tcg/cris/check_abs.c tests/tcg/cris/check_addc.c tests/tcg/cris/check_addcm.c tests/tcg/cris/check_addoq.c tests/tcg/cris/check_bound.c tests/tcg/cris/check_ftag.c tests/tcg/cris/check_int64.c tests/tcg/cris/check_lz.c tests/tcg/cris/check_openpf5.c tests/tcg/cris/check_sigalrm.c tests/tcg/cris/crisutils.h tests/tcg/cris/sys.c tests/tcg/i386/test-i386-ssse3.c ui/vgafont.h Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20181213223737.11793-3-pbonzini@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* pci/pcihp: perform unplug via the hotplug handlerDavid Hildenbrand2018-12-201-0/+3
| | | | | | | | | | | | | | | | Introduce and use the "unplug" callback. This is a preparation for multi-stage hotplug handlers, whereby the bus hotplug handler is overwritten by the machine hotplug handler. This handler will then pass control to the bus hotplug handler. So to get this running cleanly, we also have to make sure to go via the hotplug handler chain when actually unplugging a device after an unplug request. Lookup the hotplug handler and call "unplug". Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* pci/pcihp: perform check for bus capability in pre_plug handlerDavid Hildenbrand2018-12-201-0/+2
| | | | | | | | | | | | Perform the check in the pre_plug handler. In addition, we need the capability only if the device is actually hotplugged (and not created during machine initialization). This is a preparation for coldplugging pci devices via that hotplug handler. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* hw: acpi: Remove AcpiRsdpDescriptor and fix testsSamuel Ortiz2018-12-201-13/+0Star
| | | | | | | | | | | | | The only remaining AcpiRsdpDescriptor users are the ACPI utils for the BIOS table tests. We remove that dependency and can thus remove the structure itself. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* hw: acpi: Export and share the ARM RSDP buildSamuel Ortiz2018-12-191-0/+2
| | | | | | | | | | | | Now that build_rsdp() supports building both legacy and current RSDP tables, we can move it to a generic folder (hw/acpi) and have the i386 ACPI code reuse it in order to reduce code duplication. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com>
* hw: arm: Carry RSDP specific data through AcpiRsdpDataSamuel Ortiz2018-12-191-0/+8
| | | | | | | | | | | | That will allow us to generalize the ARM build_rsdp() routine to support both legacy RSDP (The current i386 implementation) and extended RSDP (The ARM implementation). Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* qom: make interface types abstractMarc-André Lureau2018-12-111-5/+1Star
| | | | | | | | | | | Interfaces don't have instance, let's make the interface type really abstract to avoid confusion. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20181204142023.15982-3-marcandre.lureau@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* hw/tpm: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé2018-07-021-1/+2
| | | | | | | | | | | | | | | It eases code review, unit is explicit. Patch generated using: $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/ and modified manually. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20180625124238.25339-13-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* hw/arm/virt-acpi-build: Add smmuv3 node in IORT tablePrem Mallappa2018-05-041-0/+15
| | | | | | | | | | | | | | | | | | This patch builds the smmuv3 node in the ACPI IORT table. The RID space of the root complex, which spans 0x0-0x10000 maps to streamid space 0x0-0x10000 in smmuv3, which in turn maps to deviceid space 0x0-0x10000 in the ITS group. The guest must feature the IOMMU probe deferral series (https://lkml.org/lkml/2017/4/10/214) which fixes streamid multiple lookup. This bug is not related to the SMMU emulation. Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com> Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Shannon Zhao <zhaoshenglong@huawei.com> Message-id: 1524665762-31355-14-git-send-email-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* tests: acpi: don't read all fields in test_acpi_fadt_table()Igor Mammedov2018-03-131-81/+0Star
| | | | | | | | | | | | | | | there is no point to read fields here but not actually checking them so drop it and read only header + dsdt/facs addresses since it's needed later to fetch that tables. With this cleanup we can get rid of AcpiFadtDescriptorRev3/ ACPI_FADT_COMMON_DEF which have no users left. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* virt_arm: acpi: reuse common build_fadt()Igor Mammedov2018-03-131-10/+2Star
| | | | | | | | | | | | | Extend generic build_fadt() to support rev5.1 FADT and reuse it for 'virt' board, it would allow to phase out usage of AcpiFadtDescriptorRev5_1 and later ACPI_FADT_COMMON_DEF. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* acpi: move build_fadt() from i386 specific to generic ACPI sourceIgor Mammedov2018-03-131-0/+3
| | | | | | | | | | | | | | | It will be extended and reused by follow up patch for ARM target. PS: Since it's generic function now, don't patch FIRMWARE_CTRL, DSDT fields if they don't point to tables since platform might not provide them and use X_ variants instead if applicable. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* pc: acpi: isolate FADT specific data into AcpiFadtData structureIgor Mammedov2018-03-131-0/+28
| | | | | | | | | | | | | | | | | | | | move FADT data initialization out of fadt_setup() into dedicated init_fadt_data() that will set common for pc/q35 values in AcpiFadtData structure and acpi_get_pm_info() will complement it with pc/q35 specific values initialization. That will allow to get rid of fadt_setup() and generalize build_fadt() so it could be easily extended for rev5 and reused by ARM target. While at it also move facs/dsdt/xdsdt offsets from build_fadt() arg list into AcpiFadtData, as they belong to the same dataset. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* acpi: add build_append_gas() helper for Generic Address StructureIgor Mammedov2018-03-131-0/+20
| | | | | | | | | | | | it will help to add Generic Address Structure to ACPI tables without using packed C structures and avoid endianness issues as API doesn't need an explicit conversion. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* acpi: reuse AcpiGenericAddress instead of Acpi20GenericAddressIgor Mammedov2018-03-131-14/+3Star
| | | | | | | | | | | Drop duplicate in form of Acpi20GenericAddress and reuse AcpiGenericAddress. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* tests: add test for TPM TIS deviceStefan Berger2018-02-211-0/+105
| | | | | | | | | | | | Move the TPM TIS related register and flag #defines into include/hw/acpi/tpm.h for access by the test case. Write a test case that covers the TIS functionality. Add the tests cases to the MAINTAINERS file. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
* Move include qemu/option.h from qemu-common.h to actual usersMarkus Armbruster2018-02-091-1/+0Star
| | | | | | | | | | | | | | | | | | qemu-common.h includes qemu/option.h, but most places that include the former don't actually need the latter. Drop the include, and add it to the places that actually need it. While there, drop superfluous includes of both headers, and separate #include from file comment with a blank line. This cleanup makes the number of objects depending on qemu/option.h drop from 4545 (out of 4743) to 284 in my "build everything" tree. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-20-armbru@redhat.com> [Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
* Drop superfluous includes of qapi-types.h and test-qapi-types.hMarkus Armbruster2018-02-091-1/+0Star
| | | | | | | Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-4-armbru@redhat.com>
* tpm: add CRB deviceMarc-André Lureau2018-01-291-0/+51
| | | | | | | | | | | | | | | | | | | | | | tpm_crb is a device for TPM 2.0 Command Response Buffer (CRB) Interface as defined in TCG PC Client Platform TPM Profile (PTP) Specification Family “2.0” Level 00 Revision 01.03 v22. The PTP allows device implementation to switch between TIS and CRB model at run time, but given that CRB is a simpler device to implement, I chose to implement it as a different device. The device doesn't implement other locality than 0 for now (my laptop TPM doesn't either, so I assume this isn't so bad) Tested with some success with Linux upstream and Windows 10, seabios & modified ovmf. The device is recognized and correctly transmit command/response with passthrough & emu. However, we are missing PPI ACPI part atm. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
* acpi: Update TPM2 ACPI table to more recent specsStefan Berger2017-12-221-2/+5
| | | | | | | | | More recent specs of the TPM2 ACPI table add fields for the log area start address and the log area minimum size, which we already use for the TCPA table. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
* hw/acpi/ich9: extract ACPI_PM_PROP_TCO_ENABLED from i386/pcPhilippe Mathieu-Daudé2017-12-181-0/+2
| | | | | | | | | enable_tco is specific to i386/pc. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* hw/acpi: ACPI_PM_* defines are not restricted to i386 archPhilippe Mathieu-Daudé2017-12-181-0/+11
| | | | | | | | this allows to remove the old i386/pc dependency on acpi/core. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* hw: remove "qemu/osdep.h" from header filesPhilippe Mathieu-Daudé2017-12-181-1/+0Star
| | | | | | | | | | applied using ./scripts/clean-includes Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Corey Minyard <cminyard@mvista.com> Tested-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-12-22 17:35:35 +0100