summaryrefslogtreecommitdiffstats
path: root/include/hw/acpi
Commit message (Collapse)AuthorAgeFilesLines
* acpi/core: always set SCI_EN when SMM isn't supportedIsaku Yamahata2021-02-231-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | If SMM is not supported, ACPI fixed hardware doesn't support legacy-mode. ACPI-only platform. Where SCI_EN in PM1_CNT register is always set. The bit tells OS legacy mode(SCI_EN cleared) or ACPI mode(SCI_EN set). With the next patch (setting fadt.smi_cmd = 0 when smm isn't enabled), guest Linux tries to switch to ACPI mode, finds smi_cmd = 0, and then fails to initialize acpi subsystem. This patch proactively fixes it. This patch changes guest ABI. To keep compatibility, use "smm-compat" introduced by earlier patch. If the property is true, disable new behavior. ACPI spec 4.8.10.1 PM1 Event Grouping PM1 Eanble Registers > For ACPI-only platforms (where SCI_EN is always set) Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> Message-Id: <500f62081626997e46f96377393d3662211763a8.1613615732.git.isaku.yamahata@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* ich9, piix4: add property, smm-compat, to keep compatibility of SMMIsaku Yamahata2021-02-231-0/+1
| | | | | | | | | | | | | | The following patch will introduce incompatible behavior of SMM. Introduce a property to keep the old behavior for compatibility. To enable smm compat, use "-global ICH9-LPC.smm-compat=on" or "-global PIIX4_PM.smm-compat=on" Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> Message-Id: <47254ae0b8c6cc6945422978b6b2af2d213ef891.1613615732.git.isaku.yamahata@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
* acpi: Permit OEM ID and OEM table ID fields to be changedMarian Postevca2021-02-055-7/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Qemu's ACPI table generation sets the fields OEM ID and OEM table ID to "BOCHS " and "BXPCxxxx" where "xxxx" is replaced by the ACPI table name. Some games like Red Dead Redemption 2 seem to check the ACPI OEM ID and OEM table ID for the strings "BOCHS" and "BXPC" and if they are found, the game crashes(this may be an intentional detection mechanism to prevent playing the game in a virtualized environment). This patch allows you to override these default values. The feature can be used in this manner: qemu -machine oem-id=ABCDEF,oem-table-id=GHIJKLMN The oem-id string can be up to 6 bytes in size, and the oem-table-id string can be up to 8 bytes in size. If the string are smaller than their respective sizes they will be padded with space. If either of these parameters is not set, the current default values will be used for the one missing. Note that the the OEM Table ID field will not be extended with the name of the table, but will use either the default name or the user provided one. This does not affect the -acpitable option (for user-defined ACPI tables), which has precedence over -machine option. Signed-off-by: Marian Postevca <posteuca@mutex.one> Message-Id: <20210119003216.17637-3-posteuca@mutex.one> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* acpi: Add addr offset in build_crsJiahui Cen2021-01-171-1/+3
| | | | | | | | | | | | | | | | AML needs Address Translation offset to describe how a bridge translates addresses accross the bridge when using an address descriptor, and especially on ARM, the translation offset of pio resource is usually non zero. Therefore, it's necessary to pass offset for pio, mmio32, mmio64 and bus number into build_crs. Acked-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Jiahui Cen <cenjiahui@huawei.com> Message-Id: <20210114100643.10617-4-cenjiahui@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* x86: acpi: let the firmware handle pending "CPU remove" events in SMMIgor Mammedov2020-12-091-0/+1
| | | | | | | | | | | if firmware and QEMU negotiated CPU hotunplug support, generate _EJ0 method so that it will mark CPU for removal by firmware and pass control to it by triggering SMI. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201207140739.3829993-6-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* acpi: cpuhp: introduce 'firmware performs eject' status/control bitsIgor Mammedov2020-12-091-0/+1
| | | | | | | | | | | | | Adds bit #4 to status/control field of CPU hotplug MMIO interface. New bit will be used OSPM to mark CPUs as pending for removal by firmware, when it calls _EJ0 method on CPU device node. Later on, when firmware sees this bit set, it will perform CPU eject which will clear bit #4 as well. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201207140739.3829993-3-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* acpi: Extract crs build form acpi_build.cYubo Miao2020-12-081-0/+22
| | | | | | | | | | | | | | | Extract crs build form acpi_build.c, the function could also be used to build the crs for pxbs for arm. The resources are composed by two parts: 1. The bar space of pci-bridge/pcie-root-ports 2. The resources needed by devices behind PXBs. The base and limit of memory/io are obtained from the config via two APIs: pci_bridge_get_base and pci_bridge_get_limit Signed-off-by: Yubo Miao <miaoyubo@huawei.com> Signed-off-by: Jiahui Cen <cenjiahui@huawei.com> Message-Id: <20201119014841.7298-5-cenjiahui@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* nomaintainer: Fix Lesser GPL version numberChetan Pant2020-11-153-3/+3
| | | | | | | | | | | | | | | | There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. This patch contains all the files, whose maintainer I could not get from ‘get_maintainer.pl’ script. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Message-Id: <20201023124424.20177-1-chetan4windows@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> [thuth: Adapted exec.c and qdev-monitor.c to new location] Signed-off-by: Thomas Huth <thuth@redhat.com>
* qom: fix objects with improper parent typePaolo Bonzini2020-10-121-1/+1
| | | | | | | | | | | Some objects accidentally inherit ObjectClass instead of Object. They compile silently but may crash after downcasting. In this patch, we introduce a coccinelle script to find broken declarations and fix them manually with proper base type. Signed-off-by: Sergey Nizovtsev <snizovtsev@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qapi: Extract ACPI commands to 'acpi.json'Philippe Mathieu-Daudé2020-09-291-1/+1
| | | | | | | | | | | | | | | | | | | Only qemu-system-FOO and qemu-storage-daemon provide QMP monitors, therefore such declarations and definitions are irrelevant for user-mode emulation. Extracting the ACPI commands to their own schema reduces the size of the qapi-misc* headers generated, and pulls less QAPI-generated code into user-mode. Suggested-by: Markus Armbruster <armbru@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200913195348.1064154-8-philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
* x86: acpi: introduce the PCI0.SMI0 ACPI deviceIgor Mammedov2020-09-291-0/+1
| | | | | | | | | | | | | | When CPU hotplug with SMI has been negotiated, describe the SMI register block in the DSDT. Pass the ACPI name of the SMI control register to build_cpus_aml(), so that CPU_SCAN_METHOD can access the register in the next patch. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200923094650.1301166-9-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* acpi: add aml_land() and aml_break() primitivesIgor Mammedov2020-09-291-0/+2
| | | | | | | | | | Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200923094650.1301166-5-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost2020-09-182-6/+2Star
| | | | | | | | | | | | | This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* acpi: move acpi_dsdt_add_power_button() to gedGerd Hoffmann2020-09-171-0/+1
| | | | | | | | | Allow reuse for microvm. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20200915120909.20838-7-kraxel@redhat.com
* acpi: ged: add x86 device variant.Gerd Hoffmann2020-09-171-0/+4
| | | | | | | | | Set AcpiDeviceIfClass->madt_cpu, otherwise identical to TYPE_ACPI_GED. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20200915120909.20838-6-kraxel@redhat.com
* acpi: ged: add control regsGerd Hoffmann2020-09-171-0/+12
| | | | | | | | Add control regs (sleep, reset) for hw-reduced acpi. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20200915120909.20838-5-kraxel@redhat.com
* vmgenid: Rename VMGENID_DEVICE to TYPE_VMGENIDEduardo Habkost2020-09-091-3/+3
| | | | | | | | | | This will make the type name constant consistent with the name of the type checking macro. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200902224311.1321159-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* Use DECLARE_*CHECKER* macrosEduardo Habkost2020-09-093-9/+6Star
| | | | | | | | | | | | | | | Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* Move QOM typedefs and add missing includesEduardo Habkost2020-09-093-6/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* Introduce a new flag for i440fx to disable PCI hotplug on the root busAni Sinha2020-08-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We introduce a new global flag 'acpi-root-pci-hotplug' for i440fx with which we can turn on or off PCI device hotplug on the root bus. This flag can be used to prevent all PCI devices from getting hotplugged or unplugged from the root PCI bus. This feature is targetted mostly towards Windows VMs. It is useful in cases where some hypervisor admins want to deploy guest VMs in a way so that the users of the guest OSes are not able to hot-eject certain PCI devices from the Windows system tray. Laine has explained the use case here in detail: https://www.redhat.com/archives/libvir-list/2020-February/msg00110.html Julia has resolved this issue for PCIE buses with the following commit: 530a0963184e57e71a5b538 ("pcie_root_port: Add hotplug disabling option") This commit attempts to introduce similar behavior for PCI root buses used in i440fx machine types (although in this case, we do not have a per-slot capability to turn hotplug on or off). Usage: -global PIIX4_PM.acpi-root-pci-hotplug=off By default, this option is enabled which means that hotplug is turned on for the PCI root bus. The previously existing flag 'acpi-pci-hotplug-with-bridge-support' for PCI-PCI bridges remain as is and can be used along with this new flag to control PCI hotplug on PCI bridges. This change has been tested using a Windows 2012R2 server guest image and also with a Windows 2019 server guest image on a Ubuntu 18.04 host using the latest master qemu from upstream. Signed-off-by: Ani Sinha <ani@anisinha.ca> Message-Id: <20200821165403.26589-1-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
* acpi: Some build_tpm2() code reshapeEric Auger2020-06-241-18/+0Star
| | | | | | | | | | | | | | | | Remove any reference to Acpi20TPM2 and adopt an implementation similar to build_ghes_v2(). Signed-off-by: Eric Auger <eric.auger@redhat.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200622140620.17229-2-eric.auger@redhat.com> Tested-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* acpi: ged: rename event memory regionGerd Hoffmann2020-06-121-1/+1
| | | | | | | | | | | | Rename memory region and callbacks and ops to carry "evt" in the name because a second region will be added shortly. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20200520132003.9492-10-kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Igor Mammedow <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* acpi: fadt: add hw-reduced sleep register supportGerd Hoffmann2020-06-121-0/+2
| | | | | | | | | | | Add fields to struct AcpiFadtData and update build_fadt() to properly generate sleep register entries. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200520132003.9492-9-kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* acpi: Move build_tpm2() in the generic partEric Auger2020-06-091-0/+2
| | | | | | | | | | | | We plan to build the TPM2 table on ARM too. In order to reuse the generation code, let's move build_tpm2() to aml-build.c. No change in the implementation. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20200601095737.32671-3-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Drop more @errp parameters after previous commitMarkus Armbruster2020-05-151-1/+1
| | | | | | | | | | | | Several functions can't fail anymore: ich9_pm_add_properties(), device_add_bootindex_property(), ppc_compat_add_property(), spapr_caps_add_properties(), PropertyInfo.create(). Drop their @errp parameter. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-16-armbru@redhat.com>
* ACPI: Record Generic Error Status Block(GESB) tableDongjiu Geng2020-05-141-0/+1
| | | | | | | | | | | | | | | | | | | | | kvm_arch_on_sigbus_vcpu() error injection uses source_id as index in etc/hardware_errors to find out Error Status Data Block entry corresponding to error source. So supported source_id values should be assigned here and not be changed afterwards to make sure that guest will write error into expected Error Status Data Block. Before QEMU writes a new error to ACPI table, it will check whether previous error has been acknowledged. If not acknowledged, the new errors will be ignored and not be recorded. For the errors section type, QEMU simulate it to memory section error. Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200512030609.19593-9-gengdongjiu@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* ACPI: Record the Generic Error Status Block addressDongjiu Geng2020-05-142-0/+8
| | | | | | | | | | | | | | | | | | Record the GHEB address via fw_cfg file, when recording a error to CPER, it will use this address to find out Generic Error Data Entries and write the error. In order to avoid migration failure, make hardware error table address to a part of GED device instead of global variable, then this address will be migrated to target QEMU. Acked-by: Xiang Zheng <zhengxiang9@huawei.com> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200512030609.19593-7-gengdongjiu@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* ACPI: Build Hardware Error Source TableDongjiu Geng2020-05-141-0/+39
| | | | | | | | | | | | | | | | | | | | | | | | This patch builds Hardware Error Source Table(HEST) via fw_cfg blobs. Now it only supports ARMv8 SEA, a type of Generic Hardware Error Source version 2(GHESv2) error source. Afterwards, we can extend the supported types if needed. For the CPER section, currently it is memory section because kernel mainly wants userspace to handle the memory errors. This patch follows the spec ACPI 6.2 to build the Hardware Error Source table. For more detailed information, please refer to document: docs/specs/acpi_hest_ghes.rst build_ghes_hw_error_notification() helper will help to add Hardware Error Notification to ACPI tables without using packed C structures and avoid endianness issues as API doesn't need explicit conversion. Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200512030609.19593-6-gengdongjiu@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* ACPI: Build related register address fields via hardware error fw_cfg blobDongjiu Geng2020-05-142-0/+29
| | | | | | | | | | | | | | | | | | | | This patch builds error_block_address and read_ack_register fields in hardware errors table , the error_block_address points to Generic Error Status Block(GESB) via bios_linker. The max size for one GESB is 1kb, For more detailed information, please refer to document: docs/specs/acpi_hest_ghes.rst Now we only support one Error source, if necessary, we can extend to support more. Suggested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200512030609.19593-5-gengdongjiu@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/virt: Add nvdimm hotplug supportShameer Kolothum2020-05-041-0/+1
| | | | | | | | | | | | | | | | | This adds support for nvdimm hotplug events through GED and enables nvdimm for the arm/virt. Now Guests with ACPI can have both cold and hot plug of nvdimms. Hot removal functionality is not yet supported. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20200421125934.14952-5-shameerali.kolothum.thodi@huawei.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* move 'typedef Aml' to qemu/types.hGerd Hoffmann2020-05-041-1/+0Star
| | | | | | | | | Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200429140003.7336-2-kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* acpi: Use macro for table-loader file nameShameer Kolothum2020-04-131-0/+1
| | | | | | | | | | | | Use macro for "etc/table-loader" and move it to the header file similar to ACPI_BUILD_TABLE_FILE/ACPI_BUILD_RSDP_FILE etc. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200403101827.30664-2-shameerali.kolothum.thodi@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* acpi: add acpi=OnOffAuto machine property to x86 and arm virtGerd Hoffmann2020-03-291-1/+0Star
| | | | | | | | | | | | | | | Remove the global acpi_enabled bool and replace it with an acpi OnOffAuto machine property. qemu throws an error now if you use -no-acpi while the machine type you are using doesn't support acpi in the first place. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20200320100136.11717-1-kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* misc: Replace zero-length arrays with flexible array member (manual)Philippe Mathieu-Daudé2020-03-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Description copied from Linux kernel commit from Gustavo A. R. Silva (see [3]): --v-- description start --v-- The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member [1], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being unadvertenly introduced [2] to the Linux codebase from now on. --^-- description end --^-- Do the similar housekeeping in the QEMU codebase (which uses C99 since commit 7be41675f7cb). All these instances of code were found with the help of the following command (then manual analysis, without modifying structures only having a single flexible array member, such QEDTable in block/qed.h): git grep -F '[0];' [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=76497732932f [3] https://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux.git/commit/?id=17642a2fbd2c1 Inspired-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* misc: Replace zero-length arrays with flexible array member (automatic)Philippe Mathieu-Daudé2020-03-161-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Description copied from Linux kernel commit from Gustavo A. R. Silva (see [3]): --v-- description start --v-- The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member [1], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being unadvertenly introduced [2] to the Linux codebase from now on. --^-- description end --^-- Do the similar housekeeping in the QEMU codebase (which uses C99 since commit 7be41675f7cb). All these instances of code were found with the help of the following Coccinelle script: @@ identifier s, m, a; type t, T; @@ struct s { ... t m; - T a[0]; + T a[]; }; @@ identifier s, m, a; type t, T; @@ struct s { ... t m; - T a[0]; + T a[]; } QEMU_PACKED; [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=76497732932f [3] https://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux.git/commit/?id=17642a2fbd2c1 Inspired-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* piix4: Add a MC146818 RTC Controller as specified in datasheetPhilippe Mathieu-Daudé2019-11-051-6/+0Star
| | | | | | | | | | | | Remove mc146818rtc instanciated in malta board, to not have it twice. Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <20171216090228.28505-13-hpoussin@reactos.org> [PMD: rebased, set RTC base_year to 2000] Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* hw/arm: Use GED for system_powerdown eventShameer Kolothum2019-10-052-0/+4
| | | | | | | | | | | | | For machines 4.2 or higher with ACPI boot use GED for system_powerdown event instead of GPIO. Guest boot with DT still uses GPIO. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20190918130633.4872-9-shameerali.kolothum.thodi@huawei.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* hw/acpi: Add ACPI Generic Event Device SupportSamuel Ortiz2019-10-051-0/+100
| | | | | | | | | | | | | | | | | | | | | | | | | | The ACPI Generic Event Device (GED) is a hardware-reduced specific device[ACPI v6.1 Section 5.6.9] that handles all platform events, including the hotplug ones. This patch generates the AML code that defines GEDs. Platforms need to specify their own GED Event bitmap to describe what kind of events they want to support through GED. Also this uses a a single interrupt for the GED device, relying on IO memory region to communicate the type of device affected by the interrupt. This way, we can support up to 32 events with a unique interrupt. This supports only memory hotplug for now. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20190918130633.4872-4-shameerali.kolothum.thodi@huawei.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
* hw/acpi: Make ACPI IO address space configurableShameer Kolothum2019-10-051-2/+7
| | | | | | | | | | | | | | | | | | | | This is in preparation for adding support for ARM64 platforms where it doesn't use port mapped IO for ACPI IO space. We are making changes so that MMIO region can be accommodated and board can pass the base address into the aml build function. Also move few MEMORY_* definitions to header so that other memory hotplug event signalling mechanisms (eg. Generic Event Device on HW-reduced acpi platforms) can use the same from their respective event handler code. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20190918130633.4872-2-shameerali.kolothum.thodi@huawei.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* ipmi: Fix SSIF ACPI handling to use the right CRSCorey Minyard2019-09-201-1/+1
| | | | | | | | Pass in the CRS so that it can be set to the SMBus for IPMI later. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
* acpi: Add i2c serial bus CRS handlingCorey Minyard2019-09-201-0/+18
| | | | | | | | | This will be required for getting IPMI SSIF (SMBus interface) into the ACPI tables. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
* numa: move numa global variable nb_numa_nodes into MachineStateTao Xu2019-09-031-1/+1
| | | | | | | | | | | | | | Add struct NumaState in MachineState and move existing numa global nb_numa_nodes(renamed as "num_nodes") into NumaState. And add variable numa_support into MachineClass to decide which submachines support NUMA. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20190809065731.9097-3-tao3.xu@intel.com> [ehabkost: include hw/boards.h again to fix build failures] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* Include hw/qdev-properties.h lessMarkus Armbruster2019-08-162-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
* Include migration/vmstate.h lessMarkus Armbruster2019-08-161-1/+0Star
| | | | | | | | | | | | | | | | | | In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary. Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* Include hw/irq.h a lot lessMarkus Armbruster2019-08-161-1/+0Star
| | | | | | | | | | | | | | | | | | | In my "build everything" tree, changing hw/irq.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get qemu_irq and.or qemu_irq_handler. Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to qemu/typedefs.h, and then include hw/irq.h only where it's still needed. Touching it now recompiles only some 500 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-13-armbru@redhat.com>
* Include generated QAPI headers lessMarkus Armbruster2019-08-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some of the generated qapi-types-MODULE.h are included all over the place. Changing a QAPI type can trigger massive recompiling. Top scorers recompile more than 1000 out of some 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h): 6300 qapi/qapi-builtin-types.h 5700 qapi/qapi-types-run-state.h 3900 qapi/qapi-types-common.h 3300 qapi/qapi-types-sockets.h 3000 qapi/qapi-types-misc.h 3000 qapi/qapi-types-crypto.h 3000 qapi/qapi-types-job.h 3000 qapi/qapi-types-block-core.h 2800 qapi/qapi-types-block.h 1300 qapi/qapi-types-net.h Clean up headers to include generated QAPI headers only where needed. Impact is negligible except for hw/qdev-properties.h. This header includes qapi/qapi-types-block.h and qapi/qapi-types-misc.h. They are used only in expansions of property definition macros such as DEFINE_PROP_BLOCKDEV_ON_ERROR() and DEFINE_PROP_OFF_AUTO(). Moving their inclusion from hw/qdev-properties.h to the users of these macros avoids pointless recompiles. This is how other property definition macros, such as DEFINE_PROP_NETDEV(), already work. Improves things for some of the top scorers: 3600 qapi/qapi-types-common.h 2800 qapi/qapi-types-sockets.h 900 qapi/qapi-types-misc.h 2200 qapi/qapi-types-crypto.h 2100 qapi/qapi-types-job.h 2100 qapi/qapi-types-block-core.h 270 qapi/qapi-types-block.h Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-3-armbru@redhat.com>
* include: Make headers more self-containedMarkus Armbruster2019-08-162-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Back in 2016, we discussed[1] rules for headers, and these were generally liked: 1. Have a carefully curated header that's included everywhere first. We got that already thanks to Peter: osdep.h. 2. Headers should normally include everything they need beyond osdep.h. If exceptions are needed for some reason, they must be documented in the header. If all that's needed from a header is typedefs, put those into qemu/typedefs.h instead of including the header. 3. Cyclic inclusion is forbidden. This patch gets include/ closer to obeying 2. It's actually extracted from my "[RFC] Baby steps towards saner headers" series[2], which demonstrates a possible path towards checking 2 automatically. It passes the RFC test there. [1] Message-ID: <87h9g8j57d.fsf@blackfin.pond.sub.org> https://lists.nongnu.org/archive/html/qemu-devel/2016-03/msg03345.html [2] Message-Id: <20190711122827.18970-1-armbru@redhat.com> https://lists.nongnu.org/archive/html/qemu-devel/2019-07/msg02715.html Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-2-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* hw/acpi: extract acpi_add_rom_blob()Wei Yang2019-06-161-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | arm and i386 has almost the same function acpi_add_rom_blob(), except giving different FWCfgCallback function. This patch moves acpi_add_rom_blob() to utils.c by passing FWCfgCallback to it. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> v7: * rebase on top of current master because of conflict v6: * change author from Igor to Michael v5: * remove unnecessary header glib/gprintf.h * rearrange include header to make it more suitable v4: * extract -> moves * adjust comment in source to make checkpatch happy v3: * put acpi_add_rom_blob() to hw/acpi/utils.c v2: * remove unused header in original source file Message-Id: <20190610011830.28398-1-richardw.yang@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Include qemu-common.h exactly where neededMarkus Armbruster2019-06-121-1/+0Star
| | | | | | | | | | | | | | | | No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
* acpi: pci: use build_append_foo() API to construct MCFGWei Yang2019-05-301-18/+0Star
| | | | | | | | | | | | | | | | | | | | | build_append_foo() API doesn't need explicit endianness conversions which eliminates a source of errors and it makes build_mcfg() look like declarative definition of MCFG table in ACPI spec, which makes it easy to review. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> v3: * add some comment on the Configuration Space base address allocation structure v2: * miss the reserved[8] of MCFG in last version, add it back * drop SOBs and make sure bios-tables-test all OK Message-Id: <20190521062836.6541-3-richardw.yang@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-12-18 13:12:23 +0100