summaryrefslogtreecommitdiffstats
path: root/include/hw/arm
Commit message (Collapse)AuthorAgeFilesLines
...
* arm/aspeed: Rework NIC attachmentCédric Le Goater2020-06-151-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The number of MACs supported by an Aspeed SoC is defined by "macs_num" under the SoC model, that is two for the AST2400 and AST2500 and four for the AST2600. The model initializes the maximum number of supported MACs but the number of realized devices is capped by the number of network device back-ends defined on the command line. This can leave unrealized devices hanging around in the QOM composition tree. To get virtual hardware that matches the physical hardware, you have to pass exactly as many -nic options as there are MACs, and some of them must be -nic none: * Machines ast2500-evb, palmetto-bmc, romulus-bmc, sonorapass-bmc, swift-bmc, and witherspoon-bmc: two -nic, and the second one must be -nic none. * Machine ast2600-evb: four -nic, the first one must be -nic none. * Machine tacoma-bmc: four nic, the first two and the last one must be -nic none. Modify the machine initialization to define which MACs are attached to a network device back-end using a bit-field property "macs-mask" and let the SoC realize all network devices. The default setting of "macs-mask" is "use MAC0" only, which works for all our AST2400 and AST2500 machines. The AST2600 machines have different configurations. The AST2600 EVB machine activates MAC1, MAC2 and MAC3 and the Tacoma BMC machine activates MAC2. Incompatible CLI change: -nic options now apply to *active* MACs: MAC1, MAC2, MAC3 for ast2600-evb, MAC2 for tacoma-bmc, and MAC0 for all the others. The machines now always get all MACs as they should. Visible in "info qom-tree", here's the change for tacoma-bmc: /machine (tacoma-bmc-machine) /peripheral (container) /peripheral-anon (container) /soc (ast2600-a1) [...] /ftgmac100[0] (ftgmac100) /ftgmac100[0] (qemu:memory-region) /ftgmac100[1] (ftgmac100) + /ftgmac100[0] (qemu:memory-region) /ftgmac100[2] (ftgmac100) + /ftgmac100[0] (qemu:memory-region) /ftgmac100[3] (ftgmac100) + /ftgmac100[0] (qemu:memory-region) [...] /mii[0] (aspeed-mmi) /aspeed-mmi[0] (qemu:memory-region) /mii[1] (aspeed-mmi) + /aspeed-mmi[0] (qemu:memory-region) /mii[2] (aspeed-mmi) + /aspeed-mmi[0] (qemu:memory-region) /mii[3] (aspeed-mmi) + /aspeed-mmi[0] (qemu:memory-region) Also visible in "info qtree"; here's the change for tacoma-bmc: dev: ftgmac100, id "" gpio-out "sysbus-irq" 1 aspeed = true - mac = "52:54:00:12:34:56" - netdev = "hub0port0" + mac = "52:54:00:12:34:57" + netdev = "" mmio 000000001e660000/0000000000002000 dev: ftgmac100, id "" - aspeed = false - mac = "00:00:00:00:00:00" + gpio-out "sysbus-irq" 1 + aspeed = true + mac = "52:54:00:12:34:58" netdev = "" + mmio 000000001e680000/0000000000002000 dev: ftgmac100, id "" - aspeed = false - mac = "00:00:00:00:00:00" - netdev = "" + gpio-out "sysbus-irq" 1 + aspeed = true + mac = "52:54:00:12:34:56" + netdev = "hub0port0" + mmio 000000001e670000/0000000000002000 dev: ftgmac100, id "" - aspeed = false - mac = "00:00:00:00:00:00" + gpio-out "sysbus-irq" 1 + aspeed = true + mac = "52:54:00:12:34:59" netdev = "" + mmio 000000001e690000/0000000000002000 [...] dev: aspeed-mmi, id "" mmio 000000001e650000/0000000000000008 dev: aspeed-mmi, id "" + mmio 000000001e650008/0000000000000008 dev: aspeed-mmi, id "" + mmio 000000001e650010/0000000000000008 dev: aspeed-mmi, id "" + mmio 000000001e650018/0000000000000008 Inactive MACs will have no peer and QEMU may warn the user with : qemu-system-arm: warning: nic ftgmac100.0 has no peer qemu-system-arm: warning: nic ftgmac100.1 has no peer qemu-system-arm: warning: nic ftgmac100.3 has no peer Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Joel Stanley <joel@jms.id.au> [Commit message expanded] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200609122339.937862-6-armbru@redhat.com>
* arm/aspeed: Compute the number of CPUs from the SoC definitionCédric Le Goater2020-06-151-1/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit ece09beec457 ("aspeed: introduce a configurable number of CPU per machine") was a convient change during bringup but the Aspeed SoCs have a fixed number of CPUs : one for the AST2400 and AST2500, and two for the AST2600. When the number of CPUs configured with -smp is less than the SoC's fixed number, the "unconfigured" CPUs are left unrealized. This can happen for machines ast2600-evb and tacoma-bmc, where the SoC's fixed number is 2. To get virtual hardware that matches the physical hardware, you have to pass -smp cpus=2 (or its sugared form -smp 2). We normally reject -smp cpus=N when N exceeds the machine's limit. Except we ignore cpus=2 (and only cpus=2) with a warning for machines ast2500-evb, palmetto-bmc, romulus-bmc, sonorapass-bmc, swift-bmc, and witherspoon-bmc. Remove the "num-cpu" property from the SoC state and use the fixed number of CPUs defined in the SoC class instead. Compute the default, min, max number of CPUs of the machine directly from the SoC class definition. Machines ast2600-evb and tacoma-bmc now always get their second CPU as they should. Visible in "info qom-tree"; here's the change for ast2600-evb: /machine (ast2600-evb-machine) /peripheral (container) /peripheral-anon (container) /soc (ast2600-a1) /a7mpcore (a15mpcore_priv) /a15mp-priv-container[0] (qemu:memory-region) /gic (arm_gic) /gic_cpu[0] (qemu:memory-region) /gic_cpu[1] (qemu:memory-region) + /gic_cpu[2] (qemu:memory-region) /gic_dist[0] (qemu:memory-region) /gic_vcpu[0] (qemu:memory-region) /gic_viface[0] (qemu:memory-region) /gic_viface[1] (qemu:memory-region) + /gic_viface[2] (qemu:memory-region) /unnamed-gpio-in[0] (irq) [...] + /unnamed-gpio-in[160] (irq) [same for 161 to 190...] + /unnamed-gpio-in[191] (irq) Also visible in "info qtree"; here's the change for ast2600-evb: bus: main-system-bus type System dev: a15mpcore_priv, id "" gpio-in "" 128 - gpio-out "sysbus-irq" 5 - num-cpu = 1 (0x1) + gpio-out "sysbus-irq" 10 + num-cpu = 2 (0x2) num-irq = 160 (0xa0) mmio 0000000040460000/0000000000008000 dev: arm_gic, id "" - gpio-in "" 160 - num-cpu = 1 (0x1) + gpio-in "" 192 + num-cpu = 2 (0x2) num-irq = 160 (0xa0) revision = 2 (0x2) has-security-extensions = true has-virtualization-extensions = true num-priority-bits = 8 (0x8) mmio ffffffffffffffff/0000000000001000 mmio ffffffffffffffff/0000000000002000 mmio ffffffffffffffff/0000000000001000 mmio ffffffffffffffff/0000000000002000 mmio ffffffffffffffff/0000000000000100 + mmio ffffffffffffffff/0000000000000100 + mmio ffffffffffffffff/0000000000000200 mmio ffffffffffffffff/0000000000000200 The other machines now reject -smp cpus=2 just like -smp cpus=3 and up. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message expanded] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200609122339.937862-5-armbru@redhat.com>
* wire in the dwc-hsotg (dwc2) USB host controller emulationPaul Zimmerman2020-06-051-1/+2
| | | | | | | | | Wire the dwc-hsotg (dwc2) emulation into Qemu Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Reviewed-by: Philippe Mathieu-Daude <f4bug@amsat.org> Message-id: 20200520235349.21215-7-pauldzim@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* raspi: add BCM2835 SOC MPHI emulationPaul Zimmerman2020-06-051-0/+2
| | | | | | | | | | | | | Add BCM2835 SOC MPHI (Message-based Parallel Host Interface) emulation. It is very basic, only providing the FIQ interrupt needed to allow the dwc-otg USB host controller driver in the Raspbian kernel to function. Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Acked-by: Philippe Mathieu-Daude <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200520235349.21215-2-pauldzim@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/fsl-imx7: Connect watchdog interruptsGuenter Roeck2020-05-211-0/+5
| | | | | | | | | | | i.MX7 supports watchdog pretimeout interupts. With this commit, the watchdog in mcimx7d-sabre is fully operational, including pretimeout support. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-9-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/fsl-imx7: Instantiate various unimplemented devicesGuenter Roeck2020-05-211-0/+16
| | | | | | | | | | Instantiating PWM, CAN, CAAM, and OCOTP devices is necessary to avoid crashes when booting mainline Linux. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-8-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/fsl-imx31: Wire up watchdogGuenter Roeck2020-05-211-0/+4
| | | | | | | | | With this patch, the watchdog on i.MX31 emulations is fully operational. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-5-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/fsl-imx25: Wire up watchdogGuenter Roeck2020-05-211-0/+5
| | | | | | | | | | With this commit, the watchdog on imx25-pdk is fully operational, including pretimeout support. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-4-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw: Move i.MX watchdog driver to hw/watchdogGuenter Roeck2020-05-213-3/+3
| | | | | | | | | | | In preparation for a full implementation, move i.MX watchdog driver from hw/misc to hw/watchdog. While at it, add the watchdog files to MAINTAINERS. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-2-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/virt: Introduce a RAS machine optionDongjiu Geng2020-05-141-0/+1
| | | | | | | | | | | | | RAS Virtualization feature is not supported now, so add a RAS machine option and disable it by default. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20200512030609.19593-3-gengdongjiu@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/nrf51: Add NRF51_PERIPHERAL_SIZE definitionPhilippe Mathieu-Daudé2020-05-111-2/+1Star
| | | | | | | | | | On the NRF51 series, all peripherals have a fixed I/O size of 4KiB. Define NRF51_PERIPHERAL_SIZE and use it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200504072822.18799-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/virt: Add nvdimm hot-plug infrastructureKwangwoo Lee2020-05-041-0/+1
| | | | | | | | | | | | | | | This adds support to init nvdimm acpi state and build nvdimm acpi tables. Please note nvdimm_support is not yet enabled. Signed-off-by: Kwangwoo Lee <kwangwoo.lee@sk.com> Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200421125934.14952-4-shameerali.kolothum.thodi@huawei.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* hw/arm: versal: Add support for the RTCEdgar E. Iglesias2020-05-041-0/+8
| | | | | | | | | | | hw/arm: versal: Add support for the RTC. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20200427181649.26851-10-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm: versal: Add support for SDEdgar E. Iglesias2020-05-041-0/+12
| | | | | | | | | | | Add support for SD. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20200427181649.26851-9-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm: versal: Embed the APUs into the SoC typeEdgar E. Iglesias2020-05-041-1/+1
| | | | | | | | | | | | Embed the APUs into the SoC type. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20200427181649.26851-8-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm: versal: Embed the ADMAs into the SoC typeEdgar E. Iglesias2020-05-041-1/+2
| | | | | | | | | | | | Embed the ADMAs into the SoC type. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20200427181649.26851-7-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm: versal: Embed the GEMs into the SoC typeEdgar E. Iglesias2020-05-041-1/+2
| | | | | | | | | | | | Embed the GEMs into the SoC type. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20200427181649.26851-6-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm: versal: Embed the UARTs into the SoC typeEdgar E. Iglesias2020-05-041-1/+2
| | | | | | | | | | | | Embed the UARTs into the SoC type. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20200427181649.26851-5-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* msf2: Add EMAC block to SmartFusion2 SoCSubbaraya Sundeep2020-04-301-0/+2
| | | | | | | | | | | With SmartFusion2 Ethernet MAC model in place this patch adds the same to SoC. Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1587048891-30493-3-git-send-email-sundeep.lkml@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* acpi: add acpi=OnOffAuto machine property to x86 and arm virtGerd Hoffmann2020-03-291-0/+2
| | | | | | | | | | | | | | | Remove the global acpi_enabled bool and replace it with an acpi OnOffAuto machine property. qemu throws an error now if you use -no-acpi while the machine type you are using doesn't support acpi in the first place. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20200320100136.11717-1-kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* hw/arm/bcm283x: Correct the license textPhilippe Mathieu-Daudé2020-03-232-2/+4
| | | | | | | | | | | | | | | | | The license is the 'GNU General Public License v2.0 or later', not 'and': This program is free software; you can redistribute it and/ori modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. Fix the license comment. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200312213455.15854-1-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell2020-03-171-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Bugfixes all over the place * get/set_uint cleanups (Felipe) * Lock guard support (Stefan) * MemoryRegion ownership cleanup (Philippe) * AVX512 optimization for buffer_is_zero (Robert) # gpg: Signature made Tue 17 Mar 2020 15:01:54 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (62 commits) hw/arm: Let devices own the MemoryRegion they create hw/arm: Remove unnecessary memory_region_set_readonly() on ROM alias hw/ppc/ppc405: Use memory_region_init_rom() with read-only regions hw/arm/stm32: Use memory_region_init_rom() with read-only regions hw/char: Let devices own the MemoryRegion they create hw/riscv: Let devices own the MemoryRegion they create hw/dma: Let devices own the MemoryRegion they create hw/display: Let devices own the MemoryRegion they create hw/core: Let devices own the MemoryRegion they create scripts/cocci: Patch to let devices own their MemoryRegions scripts/cocci: Patch to remove unnecessary memory_region_set_readonly() scripts/cocci: Patch to detect potential use of memory_region_init_rom hw/sparc: Use memory_region_init_rom() with read-only regions hw/sh4: Use memory_region_init_rom() with read-only regions hw/riscv: Use memory_region_init_rom() with read-only regions hw/ppc: Use memory_region_init_rom() with read-only regions hw/pci-host: Use memory_region_init_rom() with read-only regions hw/net: Use memory_region_init_rom() with read-only regions hw/m68k: Use memory_region_init_rom() with read-only regions hw/display: Use memory_region_init_rom() with read-only regions ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * misc: Replace zero-length arrays with flexible array member (automatic)Philippe Mathieu-Daudé2020-03-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Description copied from Linux kernel commit from Gustavo A. R. Silva (see [3]): --v-- description start --v-- The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member [1], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being unadvertenly introduced [2] to the Linux codebase from now on. --^-- description end --^-- Do the similar housekeeping in the QEMU codebase (which uses C99 since commit 7be41675f7cb). All these instances of code were found with the help of the following Coccinelle script: @@ identifier s, m, a; type t, T; @@ struct s { ... t m; - T a[0]; + T a[]; }; @@ identifier s, m, a; type t, T; @@ struct s { ... t m; - T a[0]; + T a[]; } QEMU_PACKED; [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=76497732932f [3] https://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux.git/commit/?id=17642a2fbd2c1 Inspired-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* | hw/arm/fsl-imx6: Wire up USB controllersGuenter Roeck2020-03-171-0/+6
| | | | | | | | | | | | | | | | | | | | With this patch, the USB controllers on 'sabrelite' are detected and can be used to boot the system. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200313014551.12554-6-linux@roeck-us.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* | hw/arm/fsl-imx6ul: Wire up USB controllersGuenter Roeck2020-03-171-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | IMX6UL USB controllers are quite similar to IMX7 USB controllers. Wire them up the same way. The only real difference is that wiring up phy devices is necessary to avoid phy reset timeouts in the Linux kernel. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200313014551.12554-5-linux@roeck-us.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* | hw/arm/fsl-imx6ul: Fix USB interrupt numbersGuenter Roeck2020-03-171-3/+3
|/ | | | | | | | | | | | USB1 and USB2 interrupt numbers were swapped. USB_PHY2 interrupt number is 45. That didn't really matter up to now since the interrupts were not used, but it needs to be fixed to be able to wire up the USB controllers. Fixes: 31cbf933f0e ("i.MX6UL: Add i.MX6UL SOC") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200313014551.12554-3-linux@roeck-us.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/virt: Introduce finalize_gic_version()Eric Auger2020-03-121-0/+1
| | | | | | | | | | | | | Let's move the code which freezes which gic-version to be applied in a dedicated function. We also now set by default the VIRT_GIC_VERSION_NO_SET. This eventually turns into the legacy v2 choice in the finalize() function. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20200311131618.7187-4-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/virt: Introduce VirtGICType enum typeEric Auger2020-03-121-2/+9
| | | | | | | | | | | | | | We plan to introduce yet another value for the gic version (nosel). As we already use exotic values such as 0 and -1, let's introduce a dedicated enum type and let vms->gic_version take this type. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20200311131618.7187-3-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/allwinner: add RTC device supportNiek Linnenbank2020-03-122-0/+5
| | | | | | | | | | | | | | | | | | | | | | Allwinner System-on-Chips usually contain a Real Time Clock (RTC) for non-volatile system date and time keeping. This commit adds a generic Allwinner RTC device that supports the RTC devices found in Allwinner SoC family sun4i (A10), sun7i (A20) and sun6i and newer (A31, H2+, H3, etc). The following RTC functionality and features are implemented: * Year-Month-Day read/write * Hour-Minute-Second read/write * General Purpose storage The following boards are extended with the RTC device: * Cubieboard (hw/arm/cubieboard.c) * Orange Pi PC (hw/arm/orangepi.c) Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200311221854.30370-13-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/allwinner-h3: add SDRAM controller deviceNiek Linnenbank2020-03-121-0/+5
| | | | | | | | | | | | | In the Allwinner H3 SoC the SDRAM controller is responsible for interfacing with the external Synchronous Dynamic Random Access Memory (SDRAM). Types of memory that the SDRAM controller supports are DDR2/DDR3 and capacities of up to 2GiB. This commit adds emulation support of the Allwinner H3 SDRAM controller. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200311221854.30370-12-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/allwinner-h3: add Boot ROM supportNiek Linnenbank2020-03-121-0/+21
| | | | | | | | | | | | | | | | | | | | | | A real Allwinner H3 SoC contains a Boot ROM which is the first code that runs right after the SoC is powered on. The Boot ROM is responsible for loading user code (e.g. a bootloader) from any of the supported external devices and writing the downloaded code to internal SRAM. After loading the SoC begins executing the code written to SRAM. This commits adds emulation of the Boot ROM firmware setup functionality by loading user code from SD card in the A1 SRAM. While the A1 SRAM is 64KiB, we limit the size to 32KiB because the real H3 Boot ROM also rejects sizes larger than 32KiB. For reference, this behaviour is documented by the Linux Sunxi project wiki at: https://linux-sunxi.org/BROM#U-Boot_SPL_limitations Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200311221854.30370-11-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/allwinner-h3: add EMAC ethernet deviceNiek Linnenbank2020-03-121-0/+3
| | | | | | | | | | | | | | | | The Allwinner Sun8i System on Chip family includes an Ethernet MAC (EMAC) which provides 10M/100M/1000M Ethernet connectivity. This commit adds support for the Allwinner EMAC from the Sun8i family (H2+, H3, A33, etc), including emulation for the following functionality: * DMA transfers * MII interface * Transmit CRC calculation Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200311221854.30370-10-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/allwinner: add SD/MMC host controllerNiek Linnenbank2020-03-122-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | The Allwinner System on Chip families sun4i and above contain an integrated storage controller for Secure Digital (SD) and Multi Media Card (MMC) interfaces. This commit adds support for the Allwinner SD/MMC storage controller with the following emulated features: * DMA transfers * Direct FIFO I/O * Short/Long format command responses * Auto-Stop command (CMD12) * Insert & remove card detection The following boards are extended with the SD host controller: * Cubieboard (hw/arm/cubieboard.c) * Orange Pi PC (hw/arm/orangepi.c) Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200311221854.30370-9-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/allwinner: add Security Identifier deviceNiek Linnenbank2020-03-121-0/+3
| | | | | | | | | | | | The Security Identifier device found in various Allwinner System on Chip designs gives applications a per-board unique identifier. This commit adds support for the Allwinner Security Identifier using a 128-bit UUID value as input. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200311221854.30370-8-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/allwinner: add CPU Configuration moduleNiek Linnenbank2020-03-121-0/+3
| | | | | | | | | | | | | | | Various Allwinner System on Chip designs contain multiple processors that can be configured and reset using the generic CPU Configuration module interface. This commit adds support for the Allwinner CPU configuration interface which emulates the following features: * CPU reset * CPU status Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200311221854.30370-7-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/allwinner-h3: add System Control moduleNiek Linnenbank2020-03-121-0/+3
| | | | | | | | | | | | | | The Allwinner H3 System on Chip has an System Control module that provides system wide generic controls and device information. This commit adds support for the Allwinner H3 System Control module. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200311221854.30370-6-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/allwinner-h3: add USB host controllerNiek Linnenbank2020-03-121-0/+8
| | | | | | | | | | | | | | | | The Allwinner H3 System on Chip contains multiple USB 2.0 bus connections which provide software access using the Enhanced Host Controller Interface (EHCI) and Open Host Controller Interface (OHCI) interfaces. This commit adds support for both interfaces in the Allwinner H3 System on Chip. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200311221854.30370-5-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/allwinner-h3: add Clock Control UnitNiek Linnenbank2020-03-121-0/+3
| | | | | | | | | | | | | | The Clock Control Unit is responsible for clock signal generation, configuration and distribution in the Allwinner H3 System on Chip. This commit adds support for the Clock Control Unit which emulates a simple read/write register interface. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200311221854.30370-4-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm: add Allwinner H3 System-on-ChipNiek Linnenbank2020-03-121-0/+106
| | | | | | | | | | | | | | | The Allwinner H3 is a System on Chip containing four ARM Cortex A7 processor cores. Features and specifications include DDR2/DDR3 memory, SD/MMC storage cards, 10/100/1000Mbit Ethernet, USB 2.0, HDMI and various I/O modules. This commit adds support for the Allwinner H3 System on Chip. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200311221854.30370-2-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/fsl-imx25: Wire up USB controllersGuenter Roeck2020-03-121-0/+9
| | | | | | | | | | | i.MX25 supports two USB controllers. Let's wire them up. With this patch, imx25-pdk can boot from both USB ports. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200310215146.19688-3-linux@roeck-us.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/fsl-imx25: Wire up eSDHC controllersGuenter Roeck2020-03-121-0/+9
| | | | | | | | | | | | | Wire up eSDHC controllers in fsl-imx25. For imx25-pdk, connect drives provided on the command line to available eSDHC controllers. This patch enables booting the imx25-pdk emulation from SD card. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200310215146.19688-2-linux@roeck-us.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: made commit subject consistent with other patch] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm: versal: Add support for the LPD ADMAsEdgar E. Iglesias2020-03-051-0/+6
| | | | | | | | | | Add support for the Versal LPD ADMAs. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/virt: Add the virtio-iommu device tree mappingsEric Auger2020-02-271-0/+2
| | | | | | | | | | | | | | | | | | | Adds the "virtio,pci-iommu" node in the host bridge node and the RID mapping, excluding the IOMMU RID. This is done in the virtio-iommu-pci hotplug handler which gets called only if no firmware is loaded or if -no-acpi is passed on the command line. As non DT integration is not yet supported by the kernel we must make sure we are in DT mode. This limitation will be removed as soon as the topology description feature gets supported. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20200214132745.23392-10-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
* arm: allwinner: Wire up USB portsGuenter Roeck2020-02-211-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instantiate EHCI and OHCI controllers on Allwinner A10. OHCI ports are modeled as companions of the respective EHCI ports. With this patch applied, USB controllers are discovered and instantiated when booting the cubieboard machine with a recent Linux kernel. ehci-platform 1c14000.usb: EHCI Host Controller ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 ehci-platform 1c14000.usb: irq 26, io mem 0x01c14000 ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 ehci-platform 1c1c000.usb: EHCI Host Controller ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 ehci-platform 1c1c000.usb: irq 31, io mem 0x01c1c000 ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 ohci-platform 1c14400.usb: Generic Platform OHCI controller ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 ohci-platform 1c14400.usb: irq 27, io mem 0x01c14400 ohci-platform 1c1c400.usb: Generic Platform OHCI controller ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400 usb 2-1: new high-speed USB device number 2 using ehci-platform usb-storage 2-1:1.0: USB Mass Storage device detected scsi host1: usb-storage 2-1:1.0 usb 3-1: new full-speed USB device number 2 using ohci-platform input: QEMU QEMU USB Mouse as /devices/platform/soc/1c14400.usb/usb3/3-1/3-1:1.0/0003:0627:0001.0001/input/input0 Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200217204812.9857-4-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm: ast2400/ast2500: Wire up EHCI controllersGuenter Roeck2020-02-131-0/+6
| | | | | | | | | | | | | | | | | | | | | Initialize EHCI controllers on AST2400 and AST2500 using the existing TYPE_PLATFORM_EHCI. After this change, booting ast2500-evb into Linux successfully instantiates a USB interface. ehci-platform 1e6a3000.usb: EHCI Host Controller ehci-platform 1e6a3000.usb: new USB bus registered, assigned bus number 1 ehci-platform 1e6a3000.usb: irq 21, io mem 0x1e6a3000 ehci-platform 1e6a3000.usb: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200206183437.3979-1-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* i.MX: Add support for WDT on i.MX6Roman Kapl2020-02-131-0/+3
| | | | | | | | | | Uses the i.MX2 rudimentary watchdog driver. Signed-off-by: Roman Kapl <rka@sysgo.com> Message-id: 20200207095529.11309-1-rka@sysgo.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: removed accidental duplicate #include line] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/arm/cpu: Add the kvm-no-adjvtime CPU propertyAndrew Jones2020-01-301-0/+1
| | | | | | | | | | | | kvm-no-adjvtime is a KVM specific CPU property and a first of its kind. To accommodate it we also add kvm_arm_add_vcpu_properties() and a KVM specific CPU properties description to the CPU features document. Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 20200120101023.16030-7-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/aspeed: add a 'execute-in-place' property to boot directly from CE0Cédric Le Goater2020-01-301-0/+2
| | | | | | | | | | | | | | | | | | | | | | | The overhead for the OpenBMC firmware images using the a custom U-Boot is around 2 seconds, which is fine, but with a U-Boot from mainline, it takes an extra 50 seconds or so to reach Linux. A quick survey on the number of reads performed on the flash memory region gives the following figures : OpenBMC U-Boot 922478 (~ 3.5 MBytes) Mainline U-Boot 20569977 (~ 80 MBytes) QEMU must be trashing the TCG TBs and reloading text very often. Some addresses are read more than 250.000 times. Until we find a solution to improve boot time, execution from MMIO is not activated by default. Setting this option also breaks migration compatibility. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200114103433.30534-5-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm: ast2600: Wire up the eMMC controllerAndrew Jeffery2020-01-301-0/+2
| | | | | | | | | | | | | | | | Initialise another SDHCI model instance for the AST2600's eMMC controller and use the SDHCI's num_slots value introduced previously to determine whether we should create an SD card instance for the new slot. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20200114103433.30534-3-clg@kaod.org [ clg : - removed ternary operator from sdhci_attach_drive() - renamed SDHCI objects with a '-controller' prefix ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/exynos4210: Fix DMA initializationGuenter Roeck2020-01-231-0/+4
| | | | | | | | | | | | | | | First parameter to exynos4210_get_irq() is not the SPI port number, but the interrupt group number. Interrupt groups are 20 for mdma and 21 for pdma. Interrupts are not inverted. Controllers support 32 events (pdma) or 31 events (mdma). Events must all be routed to a single interrupt line. Set other parameters as documented in Exynos4210 datasheet, section 8 (DMA controller). Fixes: 59520dc65e ("hw/arm/exynos4210: Add DMA support for the Exynos4210") Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200123052540.6132-4-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2025-01-26 10:38:44 +0100