summaryrefslogtreecommitdiffstats
path: root/include/hw/vfio
Commit message (Collapse)AuthorAgeFilesLines
* vfio: Change default dirty pages tracking behavior during migrationKirti Wankhede2020-11-231-0/+1
| | | | | | | | | | | | By default dirty pages tracking is enabled during iterative phase (pre-copy phase). Added per device opt-out option 'x-pre-copy-dirty-page-tracking' to disable dirty pages tracking during iterative phase. If the option 'x-pre-copy-dirty-page-tracking=off' is set for any VFIO device, dirty pages tracking during iterative phase will be disabled. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* vfio: Make migration support experimentalAlex Williamson2020-11-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | Support for migration of vfio devices is still in flux. Developers are attempting to add support for new devices and new architectures, but none are yet readily available for validation. We have concerns whether we're transferring device resources at the right point in the migration, whether we're guaranteeing that updates during pre-copy are migrated, and whether we can provide bit-stream compatibility should any of this change. Even the question of whether devices should participate in dirty page tracking during pre-copy seems contentious. In short, migration support has not had enough soak time and it feels premature to mark it as supported. Create an experimental option such that we can continue to develop. [Retaining previous acks/reviews for a previously identical code change with different specifics in the commit log.] Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* vfio: Add routine for finding VFIO_DEVICE_GET_INFO capabilitiesMatthew Rosato2020-11-011-0/+2
| | | | | | | | | Now that VFIO_DEVICE_GET_INFO supports capability chains, add a helper function to find specific capabilities in the chain. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* vfio: Find DMA available capabilityMatthew Rosato2020-11-011-0/+2
| | | | | | | | | | | | The underlying host may be limiting the number of outstanding DMA requests for type 1 IOMMU. Add helper functions to check for the DMA available capability and retrieve the current number of DMA mappings allowed. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> [aw: vfio_get_info_dma_avail moved inside CONFIG_LINUX] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* qapi: Add VFIO devices migration stats in Migration statsKirti Wankhede2020-11-011-0/+3
| | | | | | | | | Added amount of bytes transferred to the VM at destination by all VFIO devices Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* vfio: Get migration capability flags for containerKirti Wankhede2020-11-011-0/+3
| | | | | | | | | | | | | | | | | Added helper functions to get IOMMU info capability chain. Added function to get migration capability information from that capability chain for IOMMU container. Similar change was proposed earlier: https://lists.gnu.org/archive/html/qemu-devel/2018-05/msg03759.html Disable migration for devices if IOMMU module doesn't support migration capability. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Cc: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Cc: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* vfio: Add save state functions to SaveVMHandlersKirti Wankhede2020-11-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added .save_live_pending, .save_live_iterate and .save_live_complete_precopy functions. These functions handles pre-copy and stop-and-copy phase. In _SAVING|_RUNNING device state or pre-copy phase: - read pending_bytes. If pending_bytes > 0, go through below steps. - read data_offset - indicates kernel driver to write data to staging buffer. - read data_size - amount of data in bytes written by vendor driver in migration region. - read data_size bytes of data from data_offset in the migration region. - Write data packet to file stream as below: {VFIO_MIG_FLAG_DEV_DATA_STATE, data_size, actual data, VFIO_MIG_FLAG_END_OF_STATE } In _SAVING device state or stop-and-copy phase a. read config space of device and save to migration file stream. This doesn't need to be from vendor driver. Any other special config state from driver can be saved as data in following iteration. b. read pending_bytes. If pending_bytes > 0, go through below steps. c. read data_offset - indicates kernel driver to write data to staging buffer. d. read data_size - amount of data in bytes written by vendor driver in migration region. e. read data_size bytes of data from data_offset in the migration region. f. Write data packet as below: {VFIO_MIG_FLAG_DEV_DATA_STATE, data_size, actual data} g. iterate through steps b to f while (pending_bytes > 0) h. Write {VFIO_MIG_FLAG_END_OF_STATE} When data region is mapped, its user's responsibility to read data from data_offset of data_size before moving to next steps. Added fix suggested by Artem Polyakov to reset pending_bytes in vfio_save_iterate(). Added fix suggested by Zhi Wang to add 0 as data size in migration stream and add END_OF_STATE delimiter to indicate phase complete. Suggested-by: Artem Polyakov <artemp@nvidia.com> Suggested-by: Zhi Wang <zhi.wang.linux@gmail.com> Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> Reviewed-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* vfio: Add migration state change notifierKirti Wankhede2020-11-011-0/+2
| | | | | | | | | | | | Added migration state change notifier to get notification on migration state change. These states are translated to VFIO device state and conveyed to vendor driver. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* vfio: Add VM state change handler to know state of VMKirti Wankhede2020-11-011-0/+4
| | | | | | | | | | | | | | VM state change handler is called on change in VM's state. Based on VM state, VFIO device state should be changed. Added read/write helper functions for migration region. Added function to set device_state. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> [aw: lx -> HWADDR_PRIx, remove redundant parens] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* vfio: Add migration region initialization and finalize functionKirti Wankhede2020-11-011-0/+9
| | | | | | | | | | | | | Whether the VFIO device supports migration or not is decided based of migration region query. If migration region query is successful and migration region initialization is successful then migration is supported else migration is blocked. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* vfio: Add save and load functions for VFIO PCI devicesKirti Wankhede2020-11-011-0/+2
| | | | | | | | | Added functions to save and restore PCI device specific data, specifically config space of PCI device. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* vfio: Add vfio_get_object callback to VFIODeviceOpsKirti Wankhede2020-11-011-0/+1
| | | | | | | | | | Hook vfio_get_object callback for PCI devices. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> Suggested-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* vfio: Add function to unmap VFIO regionKirti Wankhede2020-11-011-0/+1
| | | | | | | | | | | This function will be used for migration region. Migration region is mmaped when migration starts and will be unmapped when migration is complete. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* Use DECLARE_*CHECKER* macrosEduardo Habkost2020-09-093-22/+6Star
| | | | | | | | | | | | | | | Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* Move QOM typedefs and add missing includesEduardo Habkost2020-09-093-8/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* vfio: Convert to ram_block_discard_disable()David Hildenbrand2020-07-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | VFIO is (except devices without a physical IOMMU or some mediated devices) incompatible with discarding of RAM. The kernel will pin basically all VM memory. Let's convert to ram_block_discard_disable(), which can now fail, in contrast to qemu_balloon_inhibit(). Leave "x-balloon-allowed" named as it is for now. Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Tony Krowiak <akrowiak@linux.ibm.com> Cc: Halil Pasic <pasic@linux.ibm.com> Cc: Pierre Morel <pmorel@linux.ibm.com> Cc: Eric Farman <farman@linux.ibm.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-4-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* vfio: Turn the container error into an Error handleEric Auger2019-10-041-1/+1
| | | | | | | | | | | | | The container error integer field is currently used to store the first error potentially encountered during any vfio_listener_region_add() call. However this fails to propagate detailed error messages up to the vfio_connect_container caller. Instead of using an integer, let's use an Error handle. Messages are slightly reworded to accomodate the propagation. Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Include hw/irq.h a lot lessMarkus Armbruster2019-08-161-1/+0Star
| | | | | | | | | | | | | | | | | | | In my "build everything" tree, changing hw/irq.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get qemu_irq and.or qemu_irq_handler. Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to qemu/typedefs.h, and then include hw/irq.h only where it's still needed. Touching it now recompiles only some 500 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-13-armbru@redhat.com>
* vfio-common.h: Remove inaccurate commentFabiano Rosas2019-07-021-5/+0Star
| | | | | | | | | This is a left-over from "f4ec5e26ed vfio: Add host side DMA window capabilities", which added support to more than one DMA window. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* vfio/common: Introduce vfio_set_irq_signaling helperEric Auger2019-06-131-0/+2
| | | | | | | | | | | | | | | The code used to assign an interrupt index/subindex to an eventfd is duplicated many times. Let's introduce an helper that allows to set/unset the signaling for an ACTION_TRIGGER, ACTION_MASK or ACTION_UNMASK action. In the error message, we now use errno in case of any VFIO_DEVICE_SET_IRQS ioctl failure. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* Include qemu-common.h exactly where neededMarkus Armbruster2019-06-121-1/+0Star
| | | | | | | | | | | | | | | | No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
* Merge remote-tracking branch 'remotes/awilliam/tags/vfio-updates-20190311.0' ↵Peter Maydell2019-03-121-0/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into staging VFIO updates 2019-03-11 - Resolution support for mdev displays supporting EDID interface (Gerd Hoffmann) # gpg: Signature made Mon 11 Mar 2019 19:17:39 GMT # gpg: using RSA key 239B9B6E3BB08B22 # gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>" [full] # gpg: aka "Alex Williamson <alex@shazbot.org>" [full] # gpg: aka "Alex Williamson <alwillia@redhat.com>" [full] # gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>" [full] # Primary key fingerprint: 42F6 C04E 540B D1A9 9E7B 8A90 239B 9B6E 3BB0 8B22 * remotes/awilliam/tags/vfio-updates-20190311.0: vfio/display: delay link up event vfio/display: add xres + yres properties vfio/display: add edid support. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * vfio/display: delay link up eventGerd Hoffmann2019-03-111-0/+1
| | | | | | | | | | | | | | | | | | | | Kick the display link up event with a 0.1 sec delay, so the guest has a chance to notice the link down first. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> [update for redefined macro] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
| * vfio/display: add edid support.Gerd Hoffmann2019-03-111-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds EDID support to the vfio display (aka vgpu) code. When supported by the mdev driver qemu will generate a EDID blob and pass it on using the new vfio edid region. The EDID blob will be updated on UI changes (i.e. window resize), so the guest can adapt. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> [remove control flow via macro, use unsigned format specifier] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* | vfio: Make vfio_get_region_info_cap publicAlexey Kardashevskiy2019-03-121-0/+2
|/ | | | | | | | | This makes vfio_get_region_info_cap() to be used in quirks. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Message-Id: <20190307050518.64968-3-aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* qemu/queue.h: typedef QTAILQ headsPaolo Bonzini2019-01-111-1/+2
| | | | | | | | | | | | | | | This will be needed when we change the QTAILQ head and elem structs to unions. However, it is also consistent with the usage elsewhere in QEMU for other list head structs (see for example FsMountList). Note that most QTAILQs only need their name in order to do backwards walks. Those do not break with the struct->union change, and anyway the change will also remove the need to name heads when doing backwards walks, so those are not touched here. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qemu/queue.h: leave head structs anonymous unless necessaryPaolo Bonzini2019-01-111-1/+1
| | | | | | | | | | | | Most list head structs need not be given a name. In most cases the name is given just in case one is going to use QTAILQ_LAST, QTAILQ_PREV or reverse iteration, but this does not apply to lists of other kinds, and even for QTAILQ in practice this is only rarely needed. In addition, we will soon reimplement those macros completely so that they do not need a name for the head struct. So clean up everything, not giving a name except in the rare case where it is necessary. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* vfio: make vfio_address_spaces staticPaolo Bonzini2019-01-111-1/+0Star
| | | | | | | | It is not used outside hw/vfio/common.c, so it does not need to be extern. Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* vfio: Clean up error reporting after previous commitMarkus Armbruster2018-10-191-1/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | The previous commit changed vfio's warning messages from vfio warning: DEV-NAME: Could not frobnicate to warning: vfio DEV-NAME: Could not frobnicate To match this change, change error messages from vfio error: DEV-NAME: On fire to vfio DEV-NAME: On fire Note the loss of "error". If we think marking error messages that way is a good idea, we should mark *all* error messages, i.e. make error_report() print it. Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Message-Id: <20181017082702.5581-7-armbru@redhat.com>
* vfio: Use warn_report() & friends to report warningsMarkus Armbruster2018-10-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | The vfio code reports warnings like error_report(WARN_PREFIX "Could not frobnicate", DEV-NAME); where WARN_PREFIX is defined so the message comes out as vfio warning: DEV-NAME: Could not frobnicate This usage predates the introduction of warn_report() & friends in commit 97f40301f1d. It's time to convert to that interface. Since these functions already prefix the message with "warning: ", replace WARN_PREFIX by VFIO_MSG_PREFIX, so the messages come out like warning: vfio DEV-NAME: Could not frobnicate The next commit will replace ERR_PREFIX. Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20181017082702.5581-6-armbru@redhat.com>
* vfio/platform: Make the vfio-platform device non-abstractEric Auger2018-10-151-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Up to now the vfio-platform device has been abstract and could not be instantiated. The integration of a new vfio platform device required creating a dummy derived device which only set the compatible string. Following the few vfio-platform device integrations we have seen the actual requested adaptation happens on device tree node creation (sysbus-fdt). Hence remove the abstract setting, and read the list of compatible values from sysfs if not set by a derived device. Update the amd-xgbe and calxeda-xgmac drivers to fill in the number of compatible values, as there can now be more than one. Note that sysbus-fdt does not support the instantiation of the vfio-platform device yet. Signed-off-by: Eric Auger <eric.auger@redhat.com> [geert: Rebase, set user_creatable=true, use compatible values in sysfs instead of user-supplied manufacturer/model options, reword] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* hw/vfio/display: add ramfb supportGerd Hoffmann2018-10-151-0/+2
| | | | | | | | | | | | | | | | | So we have a boot display when using a vgpu as primary display. ramfb depends on a fw_cfg file. fw_cfg files can not be added and removed at runtime, therefore a ramfb-enabled vfio device can't be hotplugged. Add a nohotplug variant of the vfio-pci device (as child class). Add the ramfb property to the nohotplug variant only. So to enable the vgpu display with boot support use this: -device vfio-pci-nohotplug,display=on,ramfb=on,sysfsdev=... Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* s390x/vfio: ap: Introduce VFIO AP deviceTony Krowiak2018-10-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduces a VFIO based AP device. The device is defined via the QEMU command line by specifying: -device vfio-ap,sysfsdev=<path-to-mediated-matrix-device> There may be only one vfio-ap device configured for a guest. The mediated matrix device is created by the VFIO AP device driver by writing a UUID to a sysfs attribute file (see docs/vfio-ap.txt). The mediated matrix device will be named after the UUID. Symbolic links to the $uuid are created in many places, so the path to the mediated matrix device $uuid can be specified in any of the following ways: /sys/devices/vfio_ap/matrix/$uuid /sys/devices/vfio_ap/matrix/mdev_supported_types/vfio_ap-passthrough/devices/$uuid /sys/bus/mdev/devices/$uuid /sys/bus/mdev/drivers/vfio_mdev/$uuid When the vfio-ap device is realized, it acquires and opens the VFIO iommu group to which the mediated matrix device is bound. This causes a VFIO group notification event to be signaled. The vfio_ap device driver's group notification handler will get called at which time the device driver will configure the the AP devices to which the guest will be granted access. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20181010170309.12045-6-akrowiak@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> [CH: added missing g_free and device category] Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* vfio/spapr: Allow backing bigger guest IOMMU pages with smaller physical pagesAlexey Kardashevskiy2018-08-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | At the moment the PPC64/pseries guest only supports 4K/64K/16M IOMMU pages and POWER8 CPU supports the exact same set of page size so so far things worked fine. However POWER9 supports different set of sizes - 4K/64K/2M/1G and the last two - 2M and 1G - are not even allowed in the paravirt interface (RTAS DDW) so we always end up using 64K IOMMU pages, although we could back guest's 16MB IOMMU pages with 2MB pages on the host. This stores the supported host IOMMU page sizes in VFIOContainer and uses this later when creating a new DMA window. This uses the system page size (64k normally, 2M/16M/1G if hugepages used) as the upper limit of the IOMMU pagesize. This changes the type of @pagesize to uint64_t as this is what memory_region_iommu_get_min_page_size() returns and clz64() takes. There should be no behavioral changes on platforms other than pseries. The guest will keep using the IOMMU page size selected by the PHB pagesize property as this only changes the underlying hardware TCE table granularity. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* vfio/ccw/pci: Allow devices to opt-in for ballooningAlex Williamson2018-08-171-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | If a vfio assigned device makes use of a physical IOMMU, then memory ballooning is necessarily inhibited due to the page pinning, lack of page level granularity at the IOMMU, and sufficient notifiers to both remove the page on balloon inflation and add it back on deflation. However, not all devices are backed by a physical IOMMU. In the case of mediated devices, if a vendor driver is well synchronized with the guest driver, such that only pages actively used by the guest driver are pinned by the host mdev vendor driver, then there should be no overlap between pages available for the balloon driver and pages actively in use by the device. Under these conditions, ballooning should be safe. vfio-ccw devices are always mediated devices and always operate under the constraints above. Therefore we can consider all vfio-ccw devices as balloon compatible. The situation is far from straightforward with vfio-pci. These devices can be physical devices with physical IOMMU backing or mediated devices where it is unknown whether a physical IOMMU is in use or whether the vendor driver is well synchronized to the working set of the guest driver. The safest approach is therefore to assume all vfio-pci devices are incompatible with ballooning, but allow user opt-in should they have further insight into mediated devices. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* vfio: remove DPRINTF() definition from vfio-common.hTiwei Bie2018-06-051-9/+0Star
| | | | | | | | | | | | This macro isn't used by any VFIO code. And its name is too generic. The vfio-common.h (in include/hw/vfio) can be included by other modules in QEMU. It can introduce conflicts. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* vfio: Include "exec/address-spaces.h" directly in the source filePhilippe Mathieu-Daudé2018-05-311-1/+0Star
| | | | | | | | | | | | | No declaration of "hw/vfio/vfio-common.h" directly requires to include the "exec/address-spaces.h" header. To simplify dependencies and ease the upcoming cleanup of "exec/address-spaces.h", directly include it in the source file where the declaration are used. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-2-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* vfio-pci: Allow mmap of MSIX BARAlexey Kardashevskiy2018-03-131-0/+1
| | | | | | | | | | | | | | | | | | | | | At the moment we unconditionally avoid mapping MSIX data of a BAR and emulate MSIX table in QEMU. However it is 1) not always necessary as a platform may provide a paravirt interface for MSIX configuration; 2) can affect the speed of MMIO access by emulating them in QEMU when frequently accessed registers share same system page with MSIX data, this is particularly a problem for systems with the page size bigger than 4KB. A new capability - VFIO_REGION_INFO_CAP_MSIX_MAPPABLE - has been added to the kernel [1] which tells the userspace that mapping of the MSIX data is possible now. This makes use of it so from now on QEMU tries mapping the entire BAR as a whole and emulate MSIX on top of that. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=a32295c612c57990d17fb0f41e7134394b2f35f6 Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* vfio/display: adding dmabuf supportGerd Hoffmann2018-03-131-0/+14
| | | | | | | Wire up dmabuf-based display. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* vfio/display: adding region supportGerd Hoffmann2018-03-131-0/+8
| | | | | | | | Wire up region-based display. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed By: Kirti Wankhede <kwankhede@nvidia.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* memory/iommu: QOM'fy IOMMU MemoryRegionAlexey Kardashevskiy2017-07-141-1/+1
| | | | | | | | | | | | | | | | | | | | | This defines new QOM object - IOMMUMemoryRegion - with MemoryRegion as a parent. This moves IOMMU-related fields from MR to IOMMU MR. However to avoid dymanic QOM casting in fast path (address_space_translate, etc), this adds an @is_iommu boolean flag to MR and provides new helper to do simple cast to IOMMU MR - memory_region_get_iommu. The flag is set in the instance init callback. This defines memory_region_is_iommu as memory_region_get_iommu()!=NULL. This switches MemoryRegion to IOMMUMemoryRegion in most places except the ones where MemoryRegion may be an alias. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20170711035620.4232-2-aik@ozlabs.ru> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* vfio: Test realized when using VFIOGroup.device_list iteratorAlex Williamson2017-07-101-0/+1
| | | | | | | | | | | | | | | | | VFIOGroup.device_list is effectively our reference tracking mechanism such that we can teardown a group when all of the device references are removed. However, we also use this list from our machine reset handler for processing resets that affect multiple devices. Generally device removals are fully processed (exitfn + finalize) when this reset handler is invoked, however if the removal is triggered via another reset handler (piix4_reset->acpi_pcihp_reset) then the device exitfn may run, but not finalize. In this case we hit asserts when we start trying to access PCI helpers since much of the PCI state of the device is released. To resolve this, add a pointer to the Object DeviceState in our common base-device and skip non-realized devices as we iterate. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* vfio/ccw: vfio based subchannel passthrough driverXiao Feng Ren2017-05-191-0/+1
| | | | | | | | | | | | | | | | We use the IOMMU_TYPE1 of VFIO to realize the subchannels passthrough, implement a vfio based subchannels passthrough driver called "vfio-ccw". Support qemu parameters in the style of: "-device vfio-ccw,sysfsdev=$mdev_file_path,devno=xx.x.xxxx' Reviewed-by: Eric Auger <eric.auger@redhat.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Xiao Feng Ren <renxiaof@linux.vnet.ibm.com> Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Message-Id: <20170517004813.58227-8-bjsdjshi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
* vfio: Pass an error object to vfio_get_deviceEric Auger2016-10-171-1/+1
| | | | | | | | | | | | Pass an error object to prepare for migration to VFIO-PCI realize. In vfio platform vfio_base_device_init we currently just report the error. Subsequent patches will propagate the error up to the realize function. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* vfio: Pass an error object to vfio_get_groupEric Auger2016-10-171-1/+1
| | | | | | | | | | | | Pass an error object to prepare for migration to VFIO-PCI realize. For the time being let's just simply report the error in vfio platform's vfio_base_device_init(). A subsequent patch will duly propagate the error up to vfio_platform_realize. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* vfio/pci: Use local error object in vfio_initfnEric Auger2016-10-171-0/+3
| | | | | | | | | | | | | | To prepare for migration to realize, let's use a local error object in vfio_initfn. Also let's use the same error prefix for all error messages. On top of the 1-1 conversion, we start using a common error prefix for all error messages. We also introduce a similar warning prefix which will be used later on. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* memory: introduce IOMMUNotifier and its capsPeter Xu2016-09-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IOMMU Notifier list is used for notifying IO address mapping changes. Currently VFIO is the only user. However it is possible that future consumer like vhost would like to only listen to part of its notifications (e.g., cache invalidations). This patch introduced IOMMUNotifier and IOMMUNotfierFlag bits for a finer grained control of it. IOMMUNotifier contains a bitfield for the notify consumer describing what kind of notification it is interested in. Currently two kinds of notifications are defined: - IOMMU_NOTIFIER_MAP: for newly mapped entries (additions) - IOMMU_NOTIFIER_UNMAP: for entries to be removed (cache invalidates) When registering the IOMMU notifier, we need to specify one or multiple types of messages to listen to. When notifications are triggered, its type will be checked against the notifier's type bits, and only notifiers with registered bits will be notified. (For any IOMMU implementation, an in-place mapping change should be notified with an UNMAP followed by a MAP.) Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1474606948-14391-2-git-send-email-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Clean up decorations and whitespace around header guardsMarkus Armbruster2016-07-122-2/+3
| | | | | | | Cleaned up with scripts/clean-header-guards.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
* Clean up header guards that don't match their file nameMarkus Armbruster2016-07-121-2/+2
| | | | | | | | | | | | Header guard symbols should match their file name to make guard collisions less likely. Offenders found with scripts/clean-header-guards.pl -vn. Cleaned up with scripts/clean-header-guards.pl, followed by some renaming of new guard symbols picked by the script to better ones. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
* vfio/spapr: Create DMA window dynamically (SPAPR IOMMU v2)Alexey Kardashevskiy2016-07-051-0/+6
| | | | | | | | | | | | | | | | | | | | | | New VFIO_SPAPR_TCE_v2_IOMMU type supports dynamic DMA window management. This adds ability to VFIO common code to dynamically allocate/remove DMA windows in the host kernel when new VFIO container is added/removed. This adds a helper to vfio_listener_region_add which makes VFIO_IOMMU_SPAPR_TCE_CREATE ioctl and adds just created IOMMU into the host IOMMU list; the opposite action is taken in vfio_listener_region_del. When creating a new window, this uses heuristic to decide on the TCE table levels number. This should cause no guest visible change in behavior. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [dwg: Added some casts to prevent printf() warnings on certain targets where the kernel headers' __u64 doesn't match uint64_t or PRIx64] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-12-18 11:39:55 +0100