summaryrefslogtreecommitdiffstats
path: root/include/monitor
Commit message (Collapse)AuthorAgeFilesLines
* qmp: Dumb down how we run QMP command registrationMarkus Armbruster2017-03-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The way we get QMP commands registered is high tech: * qapi-commands.py generates qmp_init_marshal() that does the actual work * it also generates the magic to register it as a MODULE_INIT_QAPI function, so it runs when someone calls module_call_init(MODULE_INIT_QAPI) * main() calls module_call_init() QEMU needs to register a few non-qapified commands. Same high tech works: monitor.c has its own qmp_init_marshal() along with the magic to make it run in module_call_init(MODULE_INIT_QAPI). QEMU also needs to unregister commands that are not wanted in this build's configuration (commit 5032a16). Simple enough: qmp_unregister_commands_hack(). The difficulty is to make it run after the generated qmp_init_marshal(). We can't simply run it in monitor.c's qmp_init_marshal(), because the order in which the registered functions run is indeterminate. So qmp_init_marshal() registers qmp_unregister_commands_hack() separately. Since registering *appends* to the list of registered functions, this will make it run after all the functions that have been registered already. I suspect it takes a long and expensive computer science education to not find this silly. Dumb it down as follows: * Drop MODULE_INIT_QAPI entirely * Give the generated qmp_init_marshal() external linkage. * Call it instead of module_call_init(MODULE_INIT_QAPI) * Except in QEMU proper, call new monitor_init_qmp_commands() that in turn calls the generated qmp_init_marshal(), registers the additional commands and unregisters the unwanted ones. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1488544368-30622-5-git-send-email-armbru@redhat.com>
* char: rename CharDriverState ChardevMarc-André Lureau2017-01-271-1/+1
| | | | | | | | Pick a uniform chardev type name. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qdev: add function qdev_set_id()Juergen Gross2016-11-221-0/+1
| | | | | | | | | | In order to have an easy way to add a new qdev with a specific id carve out the needed functionality from qdev_device_add() into a new function qdev_set_id(). Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
* monitor: deprecate 'default' optionMarc-André Lureau2016-10-281-1/+1
| | | | | | | | This option does nothing since commit 06ac27f. Deprecate it. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* monitor: fix crash when leaving qemu with spice audioMarc-André Lureau2016-08-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since aa5cb7f5e, the chardevs are being cleaned up when leaving qemu. However, the monitor has still references to them, which may lead to crashes when running atexit() and trying to send monitor events: #0 0x00007fffdb18f6f5 in __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:54 #1 0x00007fffdb1912fa in __GI_abort () at abort.c:89 #2 0x0000555555c263e7 in error_exit (err=22, msg=0x555555d47980 <__func__.13537> "qemu_mutex_lock") at util/qemu-thread-posix.c:39 #3 0x0000555555c26488 in qemu_mutex_lock (mutex=0x5555567a2420) at util/qemu-thread-posix.c:66 #4 0x00005555558c52db in qemu_chr_fe_write (s=0x5555567a2420, buf=0x55555740dc40 "{\"timestamp\": {\"seconds\": 1470041716, \"microseconds\": 989699}, \"event\": \"SPICE_DISCONNECTED\", \"data\": {\"server\": {\"port\": \"5900\", \"family\": \"ipv4\", \"host\": \"127.0.0.1\"}, \"client\": {\"port\": \"40272\", \"f"..., len=240) at qemu-char.c:280 #5 0x0000555555787cad in monitor_flush_locked (mon=0x5555567bd9e0) at /home/elmarco/src/qemu/monitor.c:311 #6 0x0000555555787e46 in monitor_puts (mon=0x5555567bd9e0, str=0x5555567a44ef "") at /home/elmarco/src/qemu/monitor.c:353 #7 0x00005555557880fe in monitor_json_emitter (mon=0x5555567bd9e0, data=0x5555567c73a0) at /home/elmarco/src/qemu/monitor.c:401 #8 0x00005555557882d2 in monitor_qapi_event_emit (event=QAPI_EVENT_SPICE_DISCONNECTED, qdict=0x5555567c73a0) at /home/elmarco/src/qemu/monitor.c:472 #9 0x000055555578838f in monitor_qapi_event_queue (event=QAPI_EVENT_SPICE_DISCONNECTED, qdict=0x5555567c73a0, errp=0x7fffffffca88) at /home/elmarco/src/qemu/monitor.c:497 #10 0x0000555555c15541 in qapi_event_send_spice_disconnected (server=0x5555571139d0, client=0x5555570d0db0, errp=0x5555566c0428 <error_abort>) at qapi-event.c:1038 #11 0x0000555555b11bc6 in channel_event (event=3, info=0x5555570d6c00) at ui/spice-core.c:248 #12 0x00007fffdcc9983a in adapter_channel_event (event=3, info=0x5555570d6c00) at reds.c:120 #13 0x00007fffdcc99a25 in reds_handle_channel_event (reds=0x5555567a9d60, event=3, info=0x5555570d6c00) at reds.c:324 #14 0x00007fffdcc7d4c4 in main_dispatcher_self_handle_channel_event (self=0x5555567b28b0, event=3, info=0x5555570d6c00) at main-dispatcher.c:175 #15 0x00007fffdcc7d5b1 in main_dispatcher_channel_event (self=0x5555567b28b0, event=3, info=0x5555570d6c00) at main-dispatcher.c:194 #16 0x00007fffdcca7674 in reds_stream_push_channel_event (s=0x5555570d9910, event=3) at reds-stream.c:354 #17 0x00007fffdcca749b in reds_stream_free (s=0x5555570d9910) at reds-stream.c:323 #18 0x00007fffdccb5dad in snd_disconnect_channel (channel=0x5555576a89a0) at sound.c:229 #19 0x00007fffdccb9e57 in snd_detach_common (worker=0x555557739720) at sound.c:1589 #20 0x00007fffdccb9f0e in snd_detach_playback (sin=0x5555569fe3f8) at sound.c:1602 #21 0x00007fffdcca3373 in spice_server_remove_interface (sin=0x5555569fe3f8) at reds.c:3387 #22 0x00005555558ff6e2 in line_out_fini (hw=0x5555569fe370) at audio/spiceaudio.c:152 #23 0x00005555558f909e in audio_atexit () at audio/audio.c:1754 #24 0x00007fffdb1941e8 in __run_exit_handlers (status=0, listp=0x7fffdb5175d8 <__exit_funcs>, run_list_atexit=run_list_atexit@entry=true) at exit.c:82 #25 0x00007fffdb194235 in __GI_exit (status=<optimized out>) at exit.c:104 #26 0x00007fffdb17b738 in __libc_start_main (main=0x5555558d7874 <main>, argc=67, argv=0x7fffffffcf48, init=<optimized out>, fini=<optimized out>, rtld_fini=<optimized out>, stack_end=0x7fffffffcf38) at ../csu/libc-start.c:323 Add a monitor_cleanup() functions to remove all the monitors before cleaning up the chardev. Note that we are "losing" some events that used to be sent during atexit(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20160801112343.29082-2-marcandre.lureau@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
* Clean up decorations and whitespace around header guardsMarkus Armbruster2016-07-121-1/+1
| | | | | | | Cleaned up with scripts/clean-header-guards.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
* Clean up header guards that don't match their file nameMarkus Armbruster2016-07-122-5/+6
| | | | | | | | | | | | Header guard symbols should match their file name to make guard collisions less likely. Offenders found with scripts/clean-header-guards.pl -vn. Cleaned up with scripts/clean-header-guards.pl, followed by some renaming of new guard symbols picked by the script to better ones. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
* Use scripts/clean-includes to drop redundant qemu/typedefs.hMarkus Armbruster2016-03-221-1/+0Star
| | | | | | | | | | | | Re-run scripts/clean-includes to apply the previous commit's corrections and updates. Besides redundant qemu/typedefs.h, this only finds a redundant config-host.h include in ui/egl-helpers.c. No idea how that escaped the previous runs. Some manual whitespace trimming around dropped includes squashed in. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qom: add helpers for UserCreatable object typesDaniel P. Berrange2016-02-161-3/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The QMP monitor code has two helper methods object_add and qmp_object_del that are called from several places in the code (QMP, HMP and main emulator startup). The HMP and main emulator startup code also share further logic that extracts the qom-type & id values from a qdict. We soon need to use this logic from qemu-img, qemu-io and qemu-nbd too, but don't want those to depend on the monitor, nor do we want to duplicate the code. To avoid this, move some code out of qmp.c and hmp.c adding new methods to qom/object_interfaces.c - user_creatable_add - takes a QDict holding a full object definition & instantiates it - user_creatable_add_type - takes an ID, type name, and QDict holding object properties & instantiates it - user_creatable_add_opts - takes a QemuOpts holding a full object definition & instantiates it - user_creatable_add_opts_foreach - variant on user_creatable_add_opts which can be directly used in conjunction with qemu_opts_foreach. - user_creatable_del - takes an ID and deletes the corresponding object The existing code is updated to use these new methods. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1455129674-17255-2-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* monitor/target-ppc: Define target_get_monitor_defAlexey Kardashevskiy2015-11-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At the moment get_monitor_def() returns only registers from statically defined monitor_defs array. However there is a lot of BOOK3S SPRs which are not in the list and cannot be printed from the monitor. This adds a new target platform hook - target_get_monitor_def(). The hook is called if a register was not found in the static array returned by the target_monitor_defs() hook. The hook is only defined for POWERPC, it returns registered SPRs and fails on unregistered ones providing the user with information on what is actually supported on the running CPU. The register value is saved as uint64_t as it is the biggest supported register size; target_ulong cannot be used because of the stub - it is in a "common" code and cannot include "cpu.h", etc; this is also why the hook prototype is redefined in the stub instead of being included from some header. This replaces static descriptors for GPRs, FPRs, SRs with a helper which looks for a value in a corresponding array in the CPUPPCState. The immediate effect is that all 32 SRs can be printed now (instead of 16); later this can be reused for VSX or TM registers. This replaces callbacks for MSR and XER with static descriptors in monitor_defs as they are stored in CPUPPCState. While we are here, this adds "cr" as a synonym of "ccr". Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* hmp: added io apic dump statePavel Butsykin2015-09-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | Added the hmp command to query io apic state, may be usefull after guest crashes to understand IRQ routing in guest. Implementation is only for kvm here. The dump will look like (qemu) info ioapic ioapic id=0x00 sel=0x26 (redir[11]) pin 0 0x0000000000010000 dest=0 vec=0 active-hi edge masked fixed physical pin 1 0x0000000000000031 dest=0 vec=49 active-hi edge fixed physical ... pin 23 0x0000000000010000 dest=0 vec=0 active-hi edge masked fixed physical IRR (none) Remote IRR (none) Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Andreas Färber <afaerber@suse.de> Message-Id: <1442927901-1084-9-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* hmp: added local apic dump statePavel Butsykin2015-09-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added the hmp command to query local apic registers state, may be usefull after guest crashes to understand IRQ routing in guest. (qemu) info lapic dumping local APIC state for CPU 0 LVT0 0x00010700 active-hi edge masked ExtINT (vec 0) LVT1 0x00000400 active-hi edge NMI LVTPC 0x00010000 active-hi edge masked Fixed (vec 0) LVTERR 0x000000fe active-hi edge Fixed (vec 254) LVTTHMR 0x00010000 active-hi edge masked Fixed (vec 0) LVTT 0x000000ef active-hi edge one-shot Fixed (vec 239) Timer DCR=0x3 (divide by 16) initial_count = 61360 SPIV 0x000001ff APIC enabled, focus=off, spurious vec 255 ICR 0x000000fd physical edge de-assert no-shorthand ICR2 0x00000001 cpu 1 (X2APIC ID) ESR 0x00000000 ISR (none) IRR 239 APR 0x00 TPR 0x00 DFR 0x0f LDR 0x00 PPR 0x00 Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Andreas Färber <afaerber@suse.de> Message-Id: <1442927901-1084-7-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* monitor: make monitor_fprintf and mon_get_cpu externally visiblePavel Butsykin2015-09-252-0/+2
| | | | | | | | | | | | monitor_fprintf and mon_get_cpu will be used in the target-specific monitor, so it is advisable to make it external. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Andreas Färber <afaerber@suse.de> Message-Id: <1442927901-1084-6-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qom: Don't use 'gen': false for qom-get, qom-set, object-addMarkus Armbruster2015-09-211-3/+0Star
| | | | | | | | | | With the previous commit, the generated marshalers just work, and save us a bit of handwritten code. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1442401589-24189-23-git-send-email-armbru@redhat.com>
* monitor: remove target-specific code from monitor.cPavel Butsykin2015-09-161-0/+45
| | | | | | | | | | | | | | Move target-specific code out of /monitor.c to /target-*/monitor.c, this will avoid code cluttering and using random ifdeffery. The solution is quite simple, but solves the issue of the separation of target-specific code from monitor. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1441899541-1856-3-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Include monitor/monitor.h exactly where neededMarkus Armbruster2015-06-221-1/+1
| | | | | | | | | In particular, don't include it into headers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
* Include qapi/qmp/qerror.h exactly where neededMarkus Armbruster2015-06-221-1/+0Star
| | | | | | | | | In particular, don't include it into headers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
* qerror: Finally unused, clean upMarkus Armbruster2015-06-221-1/+0Star
| | | | | | | | | | | | | Remove it except for two things in qerror.h: * Two #include to be cleaned up separately to avoid cluttering this patch. * The QERR_ macros. Mark as obsolete. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
* qmp: Wean off qerror_report()Markus Armbruster2015-06-222-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The traditional QMP command handler interface int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data); doesn't provide for returning an Error object. Instead, the handler is expected to stash it in the monitor with qerror_report(). When we rebased QMP on top of QAPI, we didn't change this interface. Instead, commit 776574d introduced "middle mode" as a temporary aid for converting existing QMP commands to QAPI one by one. More than three years later, we're still using it. Middle mode has two effects: * Instead of the native input marshallers static void qmp_marshal_input_FOO(QDict *, QObject **, Error **) it generates input marshallers conforming to the traditional QMP command handler interface. * It suppresses generation of code to register them with qmp_register_command() This permits giving them internal linkage. As long as we need qmp-commands.hx, we can't use the registry behind qmp_register_command(), so the latter has to stay for now. The former has to go to get rid of qerror_report(). Changing all QMP commands to fit the QAPI mold in one go was impractical back when we started, but by now there are just a few stragglers left: do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(), qmp_netdev_add(), do_device_add(). Switch middle mode to generate native input marshallers, and adapt the stragglers. Simplifies both the monitor code and the stragglers. Rename do_qmp_capabilities() to qmp_capabilities(), and do_device_add() to qmp_device_add, because that's how QMP command handlers are named today. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
* qdev-monitor: Propagate errors through qdev_device_add()Markus Armbruster2015-06-221-1/+1
| | | | | | | | Also polish an error message while I'm touching the line anyway, Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de>
* audio: remove LOG_TO_MONITOR along with default_monKővágó, Zoltán2015-06-151-1/+0Star
| | | | | | | | | | | | Setting QEMU_AUDIO_LOG_TO_MONITOR=1 can crash qemu (if qemu tries to log to the monitor before it's being initialized), and also nothing else in qemu logs to the monitor. This log to monitor feature was the last thing that used the default_mon variable, so I removed it too (as using it can cause problems). Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* monitor: Change return type of monitor_cur_is_qmp() to boolMarkus Armbruster2015-06-021-1/+1
| | | | | | Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
* monitor: Drop broken, unused asynchronous command interfaceMarkus Armbruster2015-06-021-5/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The asynchronous monitor command interface goes back to commit 940cc30 (Jan 2010). Added a third case to command execution. The hope back then according to the commit message was that all commands get converted to the asynchronous interface, killing off the other two cases. Didn't happen. The initial asynchronous commands balloon and info balloon were converted back to synchronous long ago (commit 96637bc and d72f32), with commit messages calling the asynchronous interface "not fully working" and "deprecated". The only other user went away in commit 3b5704b. New code generally uses synchronous commands and asynchronous events. What exactly is still "not fully working" with asynchronous commands? Well, here's a bug that defeats actual asynchronous use pretty reliably: the reply's ID is wrong (and has always been wrong) unless you use the command synchronously! To reproduce, we need an asynchronous command, so we have to go back before commit 3b5704b. Run QEMU with spice: $ qemu-system-x86_64 -nodefaults -S -spice port=5900,disable-ticketing -qmp stdio {"QMP": {"version": {"qemu": {"micro": 94, "minor": 2, "major": 2}, "package": ""}, "capabilities": []}} Connect a spice client in another terminal: $ remote-viewer spice://localhost:5900 Set up a migration destination dummy in a third terminal: $ socat TCP-LISTEN:12345 STDIO Now paste the following into the QMP monitor: { "execute": "qmp_capabilities", "id": "i0" } { "execute": "client_migrate_info", "id": "i1", "arguments": { "protocol": "spice", "hostname": "localhost", "port": 12345 } } { "execute": "query-kvm", "id": "i2" } Produces two replies immediately, one to qmp_capabilities, and one to query-kvm: {"return": {}, "id": "i0"} {"return": {"enabled": false, "present": true}, "id": "i2"} Both are correct. Two lines of debug output from libspice-server not shown. Now EOF socat's standard input to make it close the connection. This makes the asynchronous client_migrate_info complete. It replies: {"return": {}} Bug: "id": "i1" is missing. Two lines of debug output from libspice-server not shown. Cherry on top: storage for the missing ID is leaked. Get rid of this stuff before somebody hurts himself with it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
* monitor: Remove unused functionsThomas Huth2015-04-301-1/+0Star
| | | | | | | | | The functions ringbuf_read_completion() and monitor_get_rs() are not used anywhere anymore, so let's remove them. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* qom: Implement info qom-tree HMP commandAndreas Färber2015-03-171-0/+1
| | | | | | | | | | | To complement qdev's bus-oriented info qtree, info qom-tree prints a hierarchical view of the QOM composition tree. By default, the machine composition tree is shown. This can be overriden by supplying a path argument, such as "info qom-tree /". Tested-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
* Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2015-02-18' ↵Peter Maydell2015-02-261-2/+1Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into staging Clean up around error_get_pretty(), qerror_report_err() # gpg: Signature made Wed Feb 18 10:10:07 2015 GMT using RSA key ID EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" * remotes/armbru/tags/pull-error-2015-02-18: qemu-char: Avoid qerror_report_err() outside QMP command handlers qemu-img: Avoid qerror_report_err() outside QMP command handlers vl: Avoid qerror_report_err() outside QMP command handlers tpm: Avoid qerror_report_err() outside QMP command handlers numa: Avoid qerror_report_err() outside QMP command handlers net: Avoid qerror_report_err() outside QMP command handlers monitor: Avoid qerror_report_err() outside QMP command handlers monitor: Clean up around monitor_handle_fd_param() error: Use error_report_err() where appropriate error: New convenience function error_report_err() vhost-scsi: Improve error reporting for invalid vhostfd Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * monitor: Clean up around monitor_handle_fd_param()Markus Armbruster2015-02-181-2/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | monitor_handle_fd_param() is a wrapper around monitor_handle_fd_param2() that feeds errors to qerror_report_err() instead of returning them. qerror_report_err() is inappropriate in many contexts. monitor_handle_fd_param() looks simpler than monitor_handle_fd_param2(), which tempts use. Remove the temptation: drop the wrapper and open-code the (trivial) error handling instead. Replace the open-coded qerror_report_err() by error_report_err() in places that already use error_report(). Turns out that's everywhere. While there, rename monitor_handle_fd_param2() to monitor_fd_param(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
* | hmp: Name HMP info handler functions hmp_info_SUBCOMMAND()Markus Armbruster2015-02-181-2/+2
|/ | | | | | | | | | | | | | | | | | | Some are called do_info_SUBCOMMAND() (old ones, usually), some hmp_info_SUBCOMMAND(), some SUBCOMMAND_info(), sometimes SUBCOMMAND pointlessly differs in spelling. Normalize to hmp_info_SUBCOMMAND(), where SUBCOMMAND is exactly the subcommand name with '-' replaced by '_'. Exceptions: * sun4m_irq_info(), sun4m_pic_info() renamed to sun4m_hmp_info_irq(), sun4m_hmp_info_pic(). * lm32_irq_info(), lm32_pic_info() renamed to lm32_hmp_info_irq(), lm32_hmp_info_pic(). Signed-off-by: Markus Armbruster <armbru@redhat.com>
* block: Rename BlockDriverCompletionFunc to BlockCompletionFuncMarkus Armbruster2014-10-201-2/+2
| | | | | | | | | | I'll use it with block backends shortly, and the name is going to fit badly there. It's a block layer thing anyway, not just a block driver thing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* monitor: fix use after freeMichael S. Tsirkin2014-08-181-1/+1
| | | | | | | | | | | | | The function monitor_fdset_dup_fd_find_remove() references member of 'mon_fdset' which - when remove flag is set - may be freed in function monitor_fdset_cleanup(). remove is set by monitor_fdset_dup_fd_remove which in practice does not need the returned value, so make it void, and return -1 from monitor_fdset_dup_fd_find_remove. Reported-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
* qapi event: clean upWenchao Xia2014-06-231-40/+0Star
| | | | | | | Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
* qmp: convert ACPI_DEVICE_OST eventIgor Mammedov2014-06-231-1/+0Star
| | | | | | | ... using new QAPI event infrastructure Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
* qmp: add ACPI_DEVICE_OST event handlingIgor Mammedov2014-06-191-0/+1
| | | | | | | | | | emits event when ACPI OSPM evaluates _OST method of ACPI device. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* monitor: add Error-propagating monitor_handle_fd_param2()Laszlo Ersek2014-05-081-0/+1
| | | | | | | | | | | and rebase monitor_handle_fd_param() to it. (Note that this will slightly change the behavior when the qemu_parse_fd() branch is selected and it fails: we now report (and in case of QMP, set) the error immediately, rather than allowing the caller to set its own error message (if any)). Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
* monitor: Remove unused monitor_print_filenameCole Robinson2014-04-251-1/+0Star
| | | | | | | | Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
* quorum: Add quorum mechanism.Benoît Canet2014-02-211-0/+2
| | | | | | | | | | | | | | | | | This patchset enables the core of the quorum mechanism. The num_children reads are compared to get the majority version and if this version exists more than threshold times the guest won't see the error at all. If a block is corrupted or if an error occurs during an IO or if the quorum cannot be established QMP events are used to report to the management. Use gnutls's SHA-256 to compare versions. --enable-quorum must be used to enable the feature. Signed-off-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* readline: move readline to a generic locationStefan Hajnoczi2014-01-222-63/+1Star
| | | | | | | | | | | Now that the monitor and readline are decoupled, readline.h no longer belongs in include/monitor/. Put the header into include/qemu/. Move the source file into util/ so it can be linked as part of libqemuutil.a. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* readline: decouple readline from the monitorStefan Hajnoczi2014-01-221-7/+13
| | | | | | | | | | | | | | | | | | | | | Make the readline.c functionality reusable. Instead of calling monitor_printf() and monitor_flush() directly, invoke function pointers provided by the user. This way readline.c does not know about Monitor and other users will be able to make use of readline.c. Note that there is already an "opaque" argument to the ReadLineFunc callback. Consistently call it "readline_opaque" from now on to distinguish from the ReadLinePrintfFunc/ReadLineFlushFunc "opaque" argument. I also dropped the printf macro trickery since it's now highly unlikely that anyone modifying readline.c would call printf(3) directly. We no longer need this protection. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* monitor: add object-add (QMP) and object_add (HMP) commandPaolo Bonzini2014-01-061-0/+3
| | | | | | | | | | | | Add two commands that are the monitor counterparts of -object. The commands have the same Visitor-based implementation, but use different kinds of visitors so that the HMP command has a DWIM string-based syntax, while the QMP variant accepts a stricter JSON-based properties dictionary. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
* Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori2013-09-031-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | # By Max Reitz (11) and others # Via Kevin Wolf * kwolf/for-anthony: (26 commits) qemu-iotests: Overlapping cluster allocations qcow2_check: Mark image consistent qcow2-refcount: Repair shared refcount blocks qcow2-refcount: Repair OFLAG_COPIED errors qcow2-refcount: Move OFLAG_COPIED checks qcow2: Employ metadata overlap checks qcow2: Metadata overlap checks qcow2: Add corrupt bit qemu-iotests: Snapshotting zero clusters qcow2-refcount: Snapshot update for zero clusters option: Add assigned flag to QEMUOptionParameter gluster: Abort on AIO completion failure block: Remove old raw driver switch raw block driver from "raw.o" to "raw_bsd.o" raw_bsd: register bdrv_raw raw_bsd: add raw_create_options raw_bsd: introduce "special members" raw_bsd: add raw_create() raw_bsd: emit debug events in bdrv_co_readv() and bdrv_co_writev() add skeleton for BSD licensed "raw" BlockDriver ... Message-id: 1378111792-20436-1-git-send-email-kwolf@redhat.com Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
| * qcow2: Metadata overlap checksMax Reitz2013-08-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Two new functions are added; the first one checks a given range in the image file for overlaps with metadata (main header, L1 tables, L2 tables, refcount table and blocks). The second one should be used immediately before writing to the image file as it calls the first function and, upon collision, marks the image as corrupt and makes the BDS unusable, thereby preventing further access. Both functions take a bitmask argument specifying the structures which should be checked for overlaps, making it possible to also check metadata writes against colliding with other structures. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* | monitor: avoid use of global *cur_mon in monitor_find_completion()Wenchao Xia2013-08-301-1/+2
|/ | | | | | | | | | Parameter *mon is added, and local variable *mon added in previous patch is removed. The caller readline_completion(), pass rs->mon as value, which should be initialized in readline_init() called by monitor_init(). Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
* net: add support of mac-programming over macvtap in QEMU sideAmos Kong2013-07-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* add a new qevent: QEVENT_GUEST_PANICKEDHu Tao2013-04-301-0/+1
| | | | | | | | | | This event will be emited when qemu detects guest panic. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: cf0bc45ecf9ecd3699bc72dc39f8cbab8ed79d8c.1366945969.git.hutao@cn.fujitsu.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* qdev: DEVICE_DELETED eventMichael S. Tsirkin2013-03-171-0/+1
| | | | | | | | libvirt has a long-standing bug: when removing the device, it can request removal but does not know when the removal completes. Add an event so we can fix this in a robust way. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* hw: move qdev-monitor.o to toplevel directoryPaolo Bonzini2013-03-011-0/+15
| | | | | | | | | | qdev-monitor.c is the only "core qdev" file that is not used in user-mode emulation, and it does not define anything that is used by hardware models. Remove it from the hw/ directory and remove hw/qdev-monitor.h from hw/qdev.h too; this requires some files to have some new explicitly includes. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* monitor: move include files to include/monitor/Paolo Bonzini2012-12-192-0/+156
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-12-22 20:13:57 +0100