summaryrefslogtreecommitdiffstats
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* hw/intc/arm_gicv3_its: Drop TableDesc and CmdQDesc valid fieldsPeter Maydell2022-02-081-2/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | Currently we track in the TableDesc and CmdQDesc structs the state of the GITS_BASER<n> and GITS_CBASER Valid bits. However we aren't very consistent abut checking the valid field: we test it in update_cte() and update_dte(), but not anywhere else we look things up in tables. The GIC specification says that it is UNPREDICTABLE if a guest fails to set any of these Valid bits before enabling the ITS via GITS_CTLR.Enabled. So we can choose to handle Valid == 0 as equivalent to a zero-length table. This is in fact how we're already catching this case in most of the table-access paths: when Valid is 0 we leave the num_entries fields in TableDesc or CmdQDesc set to zero, and then the out-of-bounds check "index >= num_entries" that we have to do anyway before doing any of these table lookups will always be true, catching the no-valid-table case without any extra code. So we can remove the checks on the valid field from update_cte() and update_dte(): since these happen after the bounds check there was never any case when the test could fail. That means the valid fields would be entirely unused, so just remove them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220201193207.2771604-11-peter.maydell@linaro.org
* hw/arm/boot: Drop nb_cpus field from arm_boot_infoPeter Maydell2022-02-081-1/+0Star
| | | | | | | | | | | | | | | We use the arm_boot_info::nb_cpus field in only one place, and that place can easily get the number of CPUs locally rather than relying on the board code to have set the field correctly. (At least one board, xlnx-versal-virt, does not set the field despite having more than one CPU.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Tested-by: Cédric Le Goater <clg@kaod.org> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20220127154639.2090164-16-peter.maydell@linaro.org
* hw/arm/boot: Don't write secondary boot stub if using PSCIPeter Maydell2022-02-081-0/+3
| | | | | | | | | | | | | | | | | | | | | | | If we're using PSCI emulation to start secondary CPUs, there is no point in writing the "secondary boot" stub code, because it will never be used -- secondary CPUs start powered-off, and when powered on are set to begin execution at the address specified by the guest's power-on PSCI call, not at the stub. Move the call to the hook that writes the secondary boot stub code so that we can do it only if we're starting a Linux kernel and not using PSCI. (None of the users of the hook care about the ordering of its call relative to anything else: they only use it to write a rom blob to guest memory.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Tested-by: Cédric Le Goater <clg@kaod.org> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20220127154639.2090164-14-peter.maydell@linaro.org
* hw/arm/versal: Let boot.c handle PSCI enablementPeter Maydell2022-02-081-1/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | Instead of setting the CPU psci-conduit and start-powered-off properties in the xlnx-versal-virt board code, set the arm_boot_info psci_conduit field so that the boot.c code can do it. This will fix a corner case where we were incorrectly enabling PSCI emulation when booting guest code into EL3 because it was an ELF file passed to -kernel. (EL3 guest code started via -bios, -pflash, or the generic loader was already being run with PSCI emulation disabled.) Note that EL3 guest code has no way to turn on the secondary CPUs because there's no emulated power controller, but this was already true for EL3 guest code run via -bios, -pflash, or the generic loader. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Cédric Le Goater <clg@kaod.org> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20220127154639.2090164-8-peter.maydell@linaro.org
* hw/arm/boot: Support setting psci-conduit based on guest ELPeter Maydell2022-02-081-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we expect board code to set the psci-conduit property on CPUs and ensure that secondary CPUs are created with the start-powered-off property set to false, if the board wishes to use QEMU's builtin PSCI emulation. This worked OK for the virt board where we first wanted to use it, because the virt board directly creates its CPUs and is in a reasonable position to set those properties. For other boards which model real hardware and use a separate SoC object, however, it is more awkward. Most PSCI-using boards just set the psci-conduit board unconditionally. This was never strictly speaking correct (because you would not be able to run EL3 guest firmware that itself provided the PSCI interface, as the QEMU implementation would overrule it), but mostly worked in practice because for non-PSCI SMC calls QEMU would emulate the SMC instruction as normal (by trapping to guest EL3). However, we would like to make our PSCI emulation follow the part of the SMCC specification that mandates that SMC calls with unknown function identifiers return a failure code, which means that all SMC calls will be handled by the PSCI code and the "emulate as normal" path will no longer be taken. We tried to implement that in commit 9fcd15b9193e81 ("arm: tcg: Adhere to SMCCC 1.3 section 5.2"), but this regressed attempts to run EL3 guest code on the affected boards: * mcimx6ul-evk, mcimx7d-sabre, orangepi, xlnx-zcu102 * for the case only of EL3 code loaded via -kernel (and not via -bios or -pflash), virt and xlnx-versal-virt so for the 7.0 release we reverted it (in commit 4825eaae4fdd56f). This commit provides a mechanism that boards can use to arrange that psci-conduit is set if running guest code at a low enough EL but not if it would be running at the same EL that the conduit implies that the QEMU PSCI implementation is using. (Later commits will convert individual board models to use this mechanism.) We do this by moving the setting of the psci-conduit and start-powered-off properties to arm_load_kernel(). Boards which want to potentially use emulated PSCI must set a psci_conduit field in the arm_boot_info struct to the type of conduit they want to use (SMC or HVC); arm_load_kernel() will then set the CPUs up accordingly if it is not going to start the guest code at the same or higher EL as the fake QEMU firmware would be at. Board/SoC code which uses this mechanism should no longer set the CPU psci-conduit property directly. It should only set the start-powered-off property for secondaries if EL3 guest firmware running bare metal expects that rather than the alternative "all CPUs start executing the firmware at once". Note that when calculating whether we are going to run guest code at EL3, we ignore the setting of arm_boot_info::secure_board_setup, which might cause us to run a stub bit of guest code at EL3 which does some board-specific setup before dropping to EL2 or EL1 to run the guest kernel. This is OK because only one board that enables PSCI sets secure_board_setup (the highbank board), and the stub code it writes will behave the same way whether the one SMC call it makes is handled by "emulate the SMC" or by "PSCI default returns an error code". So we can leave that stub code in place until after we've changed the PSCI default behaviour; at that point we will remove it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20220127154639.2090164-4-peter.maydell@linaro.org
* hw/arm/xlnx-zynqmp: 'Or' the QSPI / QSPI DMA IRQsFrancisco Iglesias2022-02-081-0/+2
| | | | | | | | | | | | | 'Or' the IRQs coming from the QSPI and QSPI DMA models. This is done for avoiding the situation where one of the models incorrectly deasserts an interrupt asserted from the other model (which will result in that the IRQ is lost and will not reach guest SW). Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20220203151742.1457-1-francisco.iglesias@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* ACPI ERST: create ACPI ERST table for pc/x86 machinesEric DeVolder2022-02-061-0/+5
| | | | | | | | | | This change exposes ACPI ERST support for x86 guests. Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Ani Sinha <ani@anisinha.ca> Message-Id: <1643402289-22216-8-git-send-email-eric.devolder@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* ACPI ERST: header file for ERSTEric DeVolder2022-02-061-0/+19
| | | | | | | | | | This change introduces the public defintions for ACPI ERST. Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Ani Sinha <ani@anisinha.ca> Message-Id: <1643402289-22216-5-git-send-email-eric.devolder@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* ACPI ERST: PCI device_id for ERSTEric DeVolder2022-02-061-0/+1
| | | | | | | | | | | | This change reserves the PCI device_id for the new ACPI ERST device. Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Ani Sinha <ani@anisinha.ca> Message-Id: <1643402289-22216-4-git-send-email-eric.devolder@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* block.h: remove outdated commentEmanuele Giuseppe Esposito2022-02-011-1/+0Star
| | | | | | | | | | | | | The comment "disk I/O throttling" doesn't make any sense at all any more. It was added in commit 0563e191516 to describe bdrv_io_limits_enable()/disable(), which were removed in commit 97148076, so the comment is just a forgotten leftover. Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Message-Id: <20220131125615.74612-1-eesposit@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block/export: Fix vhost-user-blk shutdown with requests in flightKevin Wolf2022-02-011-0/+5
| | | | | | | | | | | | | | | | The vhost-user-blk export runs requests asynchronously in their own coroutine. When the vhost connection goes away and we want to stop the vhost-user server, we need to wait for these coroutines to stop before we can unmap the shared memory. Otherwise, they would still access the unmapped memory and crash. This introduces a refcount to VuServer which is increased when spawning a new request coroutine and decreased before the coroutine exits. The memory is only unmapped when the refcount reaches zero. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20220125151435.48792-1-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* Merge remote-tracking branch 'remotes/legoater/tags/pull-ppc-20220130' into ↵Peter Maydell2022-01-311-0/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | staging ppc 7.0 queue: * Exception and TLB fixes for the 405 CPU (Fabiano and Cedric) * spapr fixes (Alexey and Daniel) * PowerNV PHB3/4 fixes (Frederic and Daniel) * PowerNV XIVE improvements (Cedric) * 603 CPUs fixes (Christophe) * Book-E exception fixes (Vitaly) * Misc compile issues (Philippe and Fabiano) * Exception model rework for the BookS CPUs (Fabiano) * Exception model rework for the 74xx CPUs (Fabiano) * Removal of 602 CPUs # gpg: Signature made Sun 30 Jan 2022 17:42:23 GMT # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * remotes/legoater/tags/pull-ppc-20220130: (41 commits) target/ppc: Remove support for the PowerPC 602 CPU target/ppc: 74xx: Set SRRs directly in exception code target/ppc: 74xx: System Reset interrupt cleanup target/ppc: 74xx: System Call exception cleanup target/ppc: 74xx: Program exception cleanup target/ppc: 74xx: External interrupt cleanup target/ppc: 74xx: Machine Check exception cleanup target/ppc: Simplify powerpc_excp_74xx target/ppc: Introduce powerpc_excp_74xx target/ppc: books: Program exception cleanup target/ppc: books: External interrupt cleanup target/ppc: books: Machine Check exception cleanup target/ppc: Simplify powerpc_excp_books target/ppc: Introduce powerpc_excp_books target/ppc: 405: Watchdog timer exception cleanup target/ppc: 405: Program exception cleanup target/ppc: 405: Instruction storage interrupt cleanup target/ppc: 405: Data Storage exception cleanup target/ppc: 405: Debug exception cleanup target/ppc: 405: Alignment exception cleanup ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * hw/ppc/vof: Add missing includesPhilippe Mathieu-Daudé2022-01-281-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | vof.h requires "qom/object.h" for DECLARE_CLASS_CHECKERS(), "exec/memory.h" for address_space_read/write(), "exec/address-spaces.h" for address_space_memory and more importantly "cpu.h" for target_ulong. vof.c doesn't need "exec/ram_addr.h". Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220122003104.84391-1-f4bug@amsat.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
* | Merge remote-tracking branch ↵Peter Maydell2022-01-287-9/+298
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/pmaydell/tags/pull-target-arm-20220128' into staging target-arm queue: * Update copyright dates to 2022 * hw/armv7m: Fix broken VMStateDescription * hw/char/exynos4210_uart: Fix crash on trying to load VM state * rtc: Move RTC function prototypes to their own header * xlnx-versal-virt: Support PMC SLCR * xlnx-versal-virt: Support OSPI flash memory controller * scripts: Explain the difference between linux-headers and standard-headers * target/arm: Log CPU index in 'Taking exception' log * arm_gicv3_its: Various bugfixes and cleanups * arm_gicv3_its: Implement the missing MOVI and MOVALL commands * ast2600: Fix address mapping of second SPI controller * target/arm: Use correct entrypoint for SVC taken from Hyp to Hyp # gpg: Signature made Fri 28 Jan 2022 15:29:36 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20220128: (32 commits) target/arm: Use correct entrypoint for SVC taken from Hyp to Hyp hw/arm: ast2600: Fix address mapping of second SPI controller hw/intc/arm_gicv3_its: Implement MOVI hw/intc/arm_gicv3_its: Implement MOVALL hw/intc/arm_gicv3_its: Check table bounds against correct limit hw/intc/arm_gicv3_its: Make GITS_BASER<n> RAZ/WI for unimplemented registers hw/intc/arm_gicv3_its: Provide read accessor for translation_ops hw/intc/arm_gicv3: Set GICR_CTLR.CES if LPIs are supported hw/intc/arm_gicv3_redist: Remove unnecessary zero checks hw/intc/arm_gicv3_its: Sort ITS command list into numeric order hw/intc/arm_gicv3: Honour GICD_CTLR.EnableGrp1NS for LPIs hw/intc/arm_gicv3_its: Don't clear GITS_CWRITER on writes to GITS_CBASER hw/intc/arm_gicv3_its: Don't clear GITS_CREADR when GITS_CTLR.ENABLED is set hw/intc/arm_gicv3: Initialise dma_as in GIC, not ITS hw/intc/arm_gicv3_its: Add tracepoints target/arm: Log CPU index in 'Taking exception' log scripts: Explain the difference between linux-headers and standard-headers MAINTAINERS: Remove myself (for raspi). MAINTAINERS: Add an entry for Xilinx Versal OSPI hw/arm/xlnx-versal-virt: Connect mt35xu01g flashes to the OSPI ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | hw/intc/arm_gicv3_its: Check table bounds against correct limitPeter Maydell2022-01-281-1/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently when we fill in a TableDesc based on the value the guest has written to the GITS_BASER<n> register, we calculate both: * num_entries : the number of entries in the table, constrained by the amount of memory the guest has given it * num_ids : the number of IDs we support for this table, constrained by the implementation choices and the architecture (eg DeviceIDs are 16 bits, so num_ids is 1 << 16) When validating ITS commands, however, we check only num_ids, thus allowing a broken guest to specify table entries that index off the end of it. This will only corrupt guest memory, but the ITS is supposed to reject such commands as invalid. Instead of calculating both num_entries and num_ids, set num_entries to the minimum of the two limits, and check that. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220122182444.724087-13-peter.maydell@linaro.org
| * | hw/arm/xlnx-versal: Connect the OSPI flash memory controller modelFrancisco Iglesias2022-01-281-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Connect the OSPI flash memory controller model (including the source and destination DMA). Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220121161141.14389-8-francisco.iglesias@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | hw/ssi: Add a model of Xilinx Versal's OSPI flash memory controllerFrancisco Iglesias2022-01-281-0/+111
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a model of Xilinx Versal's OSPI flash memory controller. Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20220121161141.14389-7-francisco.iglesias@xilinx.com [PMM: fixed indent] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | hw/dma/xlnx_csu_dma: Support starting a read transfer through a class methodFrancisco Iglesias2022-01-281-2/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | An option on real hardware when embedding a DMA engine into a peripheral is to make the peripheral control the engine through a custom DMA control (hardware) interface between the two. Software drivers in this scenario configure and trigger DMA operations through the controlling peripheral's register API (for example, writing a specific bit in a register could propagate down to a transfer start signal on the DMA control interface). At the same time the status, results and interrupts for the transfer might still be intended to be read and caught through the DMA engine's register API (and signals). This patch adds a class 'read' method for allowing to start read transfers from peripherals embedding and controlling the Xilinx CSU DMA engine as in above scenario. Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20220121161141.14389-6-francisco.iglesias@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | include/hw/dma/xlnx_csu_dma: Add in missing includes in the headerFrancisco Iglesias2022-01-281-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add in the missing includes in the header for being able to build the DMA model when reusing it. Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20220121161141.14389-5-francisco.iglesias@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | hw/arm/xlnx-versal: Connect Versal's PMC SLCRFrancisco Iglesias2022-01-281-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | Connect Versal's PMC SLCR (system-level control registers) model. Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20220121161141.14389-4-francisco.iglesias@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | hw/arm/xlnx-versal: 'Or' the interrupts from the BBRAM and RTC modelsFrancisco Iglesias2022-01-281-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add an orgate and 'or' the interrupts from the BBRAM and RTC models. Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20220121161141.14389-3-francisco.iglesias@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | hw/misc: Add a model of Versal's PMC SLCRFrancisco Iglesias2022-01-281-0/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a model of Versal's PMC SLCR (system-level control registers). Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20220121161141.14389-2-francisco.iglesias@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | rtc: Move RTC function prototypes to their own headerPeter Maydell2022-01-282-3/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | softmmu/rtc.c defines two public functions: qemu_get_timedate() and qemu_timedate_diff(). Currently we keep the prototypes for these in qemu-common.h, but most files don't need them. Move them to their own header, a new include/sysemu/rtc.h. Since the C files using these two functions did not need to include qemu-common.h for any other reason, we can remove those include lines when we add the include of the new rtc.h. The license for the .h file follows that of the softmmu/rtc.c where both the functions are defined. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
| * | Update copyright dates to 2022Peter Maydell2022-01-281-1/+1
| |/ | | | | | | | | | | | | | | | | | | It's a new year; update the copyright strings for our help/version/about information and for our documentation. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20220120124713.288303-1-peter.maydell@linaro.org
* | exec/cpu: Make host pages variables / macros 'target agnostic'Philippe Mathieu-Daudé2022-01-272-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | "host" pages are related to the *host* not the *target*, thus the qemu_host_page_size / qemu_host_page_mask variables and the HOST_PAGE_ALIGN() / REAL_HOST_PAGE_ALIGN() macros can be moved to "exec/cpu-common.h" which is target agnostic. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20220120000836.229419-1-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* | intc: Unexport InterruptStatsProviderClass-related functionsBernhard Beschow2022-01-272-4/+0Star
|/ | | | | | | | | The functions are only used within their respective source files, so no need for exporting. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20220116122327.73048-1-shentey@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* hw/riscv: Remove macros for ELF BIOS image namesAnup Patel2022-01-211-2/+0Star
| | | | | | | | | | Now that RISC-V Spike machine can use BIN BIOS images, we remove the macros used for ELF BIOS image names. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* hw/riscv: spike: Allow using binary firmware as biosAnup Patel2022-01-212-1/+5
| | | | | | | | | | | | | | | Currently, we have to use OpenSBI firmware ELF as bios for the spike machine because the HTIF console requires ELF for parsing "fromhost" and "tohost" symbols. The latest OpenSBI can now optionally pick-up HTIF register address from HTIF DT node so using this feature spike machine can now use OpenSBI firmware BIN as bios. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* target/riscv: Support start kernel directly by KVMYifei Jiang2022-01-211-0/+1
| | | | | | | | | | | | | | | Get kernel and fdt start address in virt.c, and pass them to KVM when cpu reset. Add kvm_riscv.h to place riscv specific interface. In addition, PLIC is created without M-mode PLIC contexts when KVM is enabled. Signed-off-by: Yifei Jiang <jiangyifei@huawei.com> Signed-off-by: Mingwang Li <limingwang@huawei.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Message-id: 20220112081329.1835-7-jiangyifei@huawei.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* hw: timer: ibex_timer: Fixup reading w/o registerWilfred Mallawa2022-01-211-1/+0Star
| | | | | | | | | | | | | This change fixes a bug where a write only register is read. As per https://docs.opentitan.org/hw/ip/rv_timer/doc/#register-table the 'INTR_TEST0' register is write only. Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20220110051606.4031241-1-alistair.francis@opensource.wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* Merge remote-tracking branch ↵Peter Maydell2022-01-204-1/+67
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/pmaydell/tags/pull-target-arm-20220120-1' into staging target-arm: * hw/intc/arm_gicv3_its: Fix various minor bugs * hw/arm/aspeed: Add the i3c device to the AST2600 SoC * hw/arm: kudo: add lm75s behind bus 1 switch at 75 * hw/arm/virt: Fix support for running guests on hosts with restricted IPA ranges * hw/intc/arm_gic: Allow reset of the running priority * hw/intc/arm_gic: Implement read of GICC_IIDR * hw/arm/virt: Support for virtio-mem-pci * hw/arm/virt: Support CPU cluster on ARM virt machine * docs/can: convert to restructuredText * hw/net: Move MV88W8618 network device out of hw/arm/ directory * hw/arm/virt: KVM: Enable PAuth when supported by the host # gpg: Signature made Thu 20 Jan 2022 16:12:12 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20220120-1: (38 commits) hw/intc/arm_gicv3: Check for !MEMTX_OK instead of MEMTX_ERROR hw/intc/arm_gicv3_its: Range-check ICID before indexing into collection table hw/intc/arm_gicv3_its: Check indexes before use, not after hw/intc/arm_gicv3_its: Factor out "find address of table entry" code hw/intc/arm_gicv3_its: Fix return codes in process_mapd() hw/intc/arm_gicv3_its: Fix return codes in process_mapc() hw/intc/arm_gicv3_its: Fix return codes in process_mapti() hw/intc/arm_gicv3_its: Refactor process_its_cmd() to reduce nesting hw/intc/arm_gicv3_its: Fix return codes in process_its_cmd() hw/intc/arm_gicv3_its: Use enum for return value of process_* functions hw/intc/arm_gicv3_its: Don't use data if reading command failed hw/intc/arm_gicv3_its: Fix handling of process_its_cmd() return value hw/intc/arm_gicv3_its: Convert int ID check to num_intids convention hw/intc/arm_gicv3_its: Fix event ID bounds checks hw/arm/aspeed: Add the i3c device to the AST2600 SoC hw/misc/aspeed_i3c.c: Introduce a dummy AST2600 I3C model. hw/arm: kudo add lm75s behind bus 1 switch at 75 hw/arm/virt: Drop superfluous checks against highmem hw/arm/virt: Disable highmem devices that don't fit in the PA range hw/arm/virt: Use the PA range to compute the memory map ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * hw/arm/aspeed: Add the i3c device to the AST2600 SoCTroy Lee2022-01-201-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | Add the new i3c device to the AST2600 SoC. Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Reviewed-by: Graeme Gregory <quic_ggregory@quicinc.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Graeme Gregory <quic_ggregory@quicinc.com> Message-id: 20220111084546.4145785-3-troy_lee@aspeedtech.com [PMM: tidied commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * hw/misc/aspeed_i3c.c: Introduce a dummy AST2600 I3C model.Troy Lee2022-01-201-0/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Aspeed 2600 SDK enables I3C support by default. The I3C driver will try to reset the device controller and set it up through device address table register. This dummy model responds to these registers with default values as listed in the ast2600v10 datasheet chapter 54.2. This avoids a guest machine kernel panic due to referencing an invalid kernel address if the device address table register isn't set correctly. Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Reviewed-by: Graeme Gregory <quic_ggregory@quicinc.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Graeme Gregory <quic_ggregory@quicinc.com> Message-id: 20220111084546.4145785-2-troy_lee@aspeedtech.com [PMM: tidied commit message; fixed format strings] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * hw/arm/virt: Add a control for the the highmem redistributorsMarc Zyngier2022-01-201-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Just like we can control the enablement of the highmem PCIe region using highmem_ecam, let's add a control for the highmem GICv3 redistributor region. Similarily to highmem_ecam, these redistributors are disabled when highmem is off. Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20220114140741.1358263-3-maz@kernel.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * hw/arm/virt: Add a control for the the highmem PCIe MMIOMarc Zyngier2022-01-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Just like we can control the enablement of the highmem PCIe ECAM region using highmem_ecam, let's add a control for the highmem PCIe MMIO region. Similarily to highmem_ecam, this region is disabled when highmem is off. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20220114140741.1358263-2-maz@kernel.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * hw/net: Move MV88W8618 network device out of hw/arm/ directoryPhilippe Mathieu-Daudé2022-01-201-0/+12
| | | | | | | | | | | | | | | | | | | | | | The Marvell 88W8618 network device is hidden in the Musicpal machine. Move it into a new unit file under the hw/net/ directory. Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20220107184429.423572-4-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* | hw/elf_ops: clear uninitialized segment spaceLaurent Vivier2022-01-201-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the mem_size of the segment is bigger than the file_size, and if this space doesn't overlap another segment, it needs to be cleared. This bug is very similar to the one we had for linux-user, 22d113b52f41 ("linux-user: Fix loading of BSS segments"), where .bss section is encoded as an extension of the the data one by setting the segment p_memsz > p_filesz. Signed-off-by: Laurent Vivier <laurent@vivier.eu> [PMD: Use recently added address_space_set()] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220115203725.3834712-3-laurent@vivier.eu>
* | exec/memory: Extract address_space_set() from dma_memory_set()Philippe Mathieu-Daudé2022-01-201-0/+16
|/ | | | | | | | | | | | | | | | | dma_memory_set() does a DMA barrier, set the address space with a constant value. The constant value filling code is not specific to DMA and can be used for AddressSpace. Extract it as a new helper: address_space_set(). Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [lv: rebase] Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <20220115203725.3834712-2-laurent@vivier.eu>
* Merge remote-tracking branch ↵Peter Maydell2022-01-191-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/thuth-gitlab/tags/pull-request-2022-01-19' into staging * Fix bits in one of the PMCW channel subsystem masks * s390x TCG shift instruction fixes * Re-organization for the MAINTAINERS file * Support for extended length of kernel command lines * Re-order the SIGP STOP code # gpg: Signature made Wed 19 Jan 2022 08:26:01 GMT # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/thuth-gitlab/tags/pull-request-2022-01-19: s390x: sigp: Reorder the SIGP STOP code s390x/ipl: support extended kernel command line size MAINTAINERS: Add myself to s390 I/O areas MAINTAINERS: split out s390x sections tests/tcg/s390x: Test shift instructions target/s390x: Fix shifting 32-bit values for more than 31 bits target/s390x: Fix cc_calc_sla_64() missing overflows target/s390x: Fix SRDA CC calculation target/s390x: Fix SLDA sign bit index s390x/css: fix PMCW invalid mask Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * s390x/css: fix PMCW invalid maskNico Boehr2022-01-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, we required bits 5, 6 and 7 to be zero (0x07 == 0b111). But, as per the principles of operation, bit 5 is ignored in MSCH and bits 0, 1, 6 and 7 need to be zero. As both PMCW_FLAGS_MASK_INVALID and ioinst_schib_valid() are only used by ioinst_handle_msch(), adjust the mask accordingly. Fixes: db1c8f53bfb1 ("s390: Channel I/O basic definitions.") Signed-off-by: Nico Boehr <nrb@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20211216131657.1057978-1-nrb@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
* | Merge remote-tracking branch 'remotes/stsquad/tags/pull-for-7.0-180122-2' ↵Peter Maydell2022-01-194-3/+21
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into staging Various testing and other misc updates: - fix compiler warnings with ui and sdl - update QXL/spice dependancy - skip I/O tests on Alpine - update fedora image to latest version - integrate lcitool and regenerate docker images - favour CONFIG_LINUX_USER over CONFIG_LINUX - add libfuse3 dependencies to docker images - add dtb-kaslr-seed control knob to virt machine - fix build breakage from HMP update - update docs for C standard and suffix usage - add more logging for debugging user hole finding - expand reserve for brk() for static 64 bit programs - fix bug with linux-user hole calculation - avoid affecting flags when printing results in float tests - add float reference files for ppc64 - update FreeBSD to 12.3 - add bison dependancy to tricore images # gpg: Signature made Tue 18 Jan 2022 16:47:42 GMT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-for-7.0-180122-2: (31 commits) docker: include bison in debian-tricore-cross FreeBSD: Upgrade to 12.3 release test/tcg/ppc64le: Add float reference files tests/tcg/multiarch: Read fp flags before printf linux-user: don't adjust base of found hole linux-user/elfload: add extra logging for hole finding linux-user: expand reserved brk space for 64bit guests docs/devel: more documentation on the use of suffixes docs/devel: update C standard to C11 monitor: move x-query-profile into accel/tcg to fix build hw/arm: add control knob to disable kaslr_seed via DTB tests/docker: add libfuse3 development headers tests/tcg: use CONFIG_LINUX_USER, not CONFIG_LINUX tests/docker: auto-generate alpine.docker with lcitool tests/docker: fully expand the alpine package list tests/docker: fix sorting of alpine image package lists tests/docker: updates to alpine package list .gitlab-ci.d/cirrus: auto-generate variables with lcitool tests/docker: remove ubuntu.docker container tests/docker: auto-generate opensuse-leap.docker with lcitool ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | docs/devel: more documentation on the use of suffixesAlex Bennée2022-01-181-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using _qemu is a little confusing. Let's use _compat for these sorts of things. We should also mention _impl which is another common suffix in the code base. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20220105135009.1584676-25-alex.bennee@linaro.org>
| * | hw/arm: add control knob to disable kaslr_seed via DTBAlex Bennée2022-01-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Generally a guest needs an external source of randomness to properly enable things like address space randomisation. However in a trusted boot environment where the firmware will cryptographically verify components having random data in the DTB will cause verification to fail. Add a control knob so we can prevent this being added to the system DTB. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Jerome Forissier <jerome@forissier.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-Id: <20220105135009.1584676-22-alex.bennee@linaro.org>
| * | ui: avoid warnings about directdb on Alpine / musl libcDaniel P. Berrangé2022-01-181-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Alpine, SDL is built with directfb support and this triggers warnings during QEMU build In file included from /usr/include/directfb/direct/thread.h:38, from /usr/include/directfb/direct/debug.h:43, from /usr/include/directfb/direct/interface.h:36, from /usr/include/directfb/directfb.h:49, from /usr/include/SDL2/SDL_syswm.h:80, from /builds/berrange/qemu/include/ui/sdl2.h:8, from ../ui/sdl2-gl.c:31: /usr/include/directfb/direct/os/waitqueue.h:41:25: error: redundant redeclaration of 'direct_waitqueue_init' [-Werror=redundant-decls] 41 | DirectResult DIRECT_API direct_waitqueue_init ( DirectWaitQueue *queue ); | ^~~~~~~~~~~~~~~~~~~~~ Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20211215141949.3512719-5-berrange@redhat.com> Message-Id: <20220105135009.1584676-5-alex.bennee@linaro.org>
| * | spice: Update QXLInterface for spice >= 0.15.0John Snow2022-01-181-0/+6
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | spice updated the spelling (and arguments) of "attache_worker" in 0.15.0. Update QEMU to match, preventing -Wdeprecated-declarations compilations from reporting build errors. See also: https://gitlab.freedesktop.org/spice/spice/-/commit/974692bda1e77af92b71ed43b022439448492cb9 Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20211215141949.3512719-3-berrange@redhat.com> Message-Id: <20220105135009.1584676-3-alex.bennee@linaro.org>
* | Merge remote-tracking branch ↵Peter Maydell2022-01-181-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/lvivier-gitlab/tags/trivial-branch-for-7.0-pull-request' into staging trivial patches pull request 20220118 Fix comments and typos Add vmstate for ETRAX timers Use ldst in megasas # gpg: Signature made Tue 18 Jan 2022 12:28:04 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/lvivier-gitlab/tags/trivial-branch-for-7.0-pull-request: linux-user: Remove MAX_SIGQUEUE_SIZE linux-user: Return void from queue_signal() linux-user: Rename user_force_sig tracepoint to match function name linux-user: Fix comment typo in arm cpu_loop code softmmu: Provide a clue as to why device tree loading failed tests: Fix typo in check-help output qdev-core.h: Fix wrongly named reference to TYPE_SPLIT_IRQ hw/scsi/megasas: Simplify using the ldst API hw/timer/etraxfs_timer: Add vmstate for ETRAX timers Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | qdev-core.h: Fix wrongly named reference to TYPE_SPLIT_IRQPeter Maydell2022-01-181-1/+1
| |/ | | | | | | | | | | | | | | | | Fix a comment in qdev-core.h where we incorrectly referred to TYPE_IRQ_SPLIT when we meant TYPE_SPLIT_IRQ. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220111172655.3546766-1-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* | Merge remote-tracking branch 'remotes/legoater/tags/pull-ppc-20220118' into ↵Peter Maydell2022-01-181-50/+30Star
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | staging ppc 7.0 queue: * More documentation updates (Leonardo) * Fixes for the 7448 CPU (Fabiano and Cedric) * Final removal of 403 CPUs and the .load_state_old handler (Cedric) * More cleanups of PHB4 models (Daniel and Cedric) # gpg: Signature made Tue 18 Jan 2022 11:59:16 GMT # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * remotes/legoater/tags/pull-ppc-20220118: (31 commits) ppc/pnv: Remove PHB4 version property ppc/pnv: Add a 'rp_model' class attribute for the PHB4 PEC ppc/pnv: Move root port allocation under pnv_pec_default_phb_realize() ppc/pnv: rename pnv_pec_stk_update_map() ppc/pnv: remove PnvPhb4PecStack object ppc/pnv: make PECs create and realize PHB4s ppc/pnv: remove PnvPhb4PecStack::stack_no ppc/pnv: move default_phb_realize() to pec_realize() ppc/pnv: remove stack pointer from PnvPHB4 ppc/pnv: reduce stack->stack_no usage ppc/pnv: introduce PnvPHB4 'pec' property ppc/pnv: move phb_regs_mr to PnvPHB4 ppc/pnv: move nest_regs_mr to PnvPHB4 ppc/pnv: change pnv_pec_stk_update_map() to use PnvPHB4 ppc/pnv: move nest_regs[] to PnvPHB4 ppc/pnv: move mmbar0/mmbar1 and friends to PnvPHB4 ppc/pnv: change pnv_phb4_update_regions() to use PnvPHB4 ppc/pnv: move intbar to PnvPHB4 ppc/pnv: move phbbar to PnvPHB4 ppc/pnv: move PCI registers to PnvPHB4 ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | ppc/pnv: Add a 'rp_model' class attribute for the PHB4 PECCédric Le Goater2022-01-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | PHB5 will introduce its own root port model. Prepare ground for it. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20220117122753.1655504-3-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
| * | ppc/pnv: remove PnvPhb4PecStack objectDaniel Henrique Barboza2022-01-181-17/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All the complexity that was scattered between PnvPhb4PecStack and PnvPHB4 are now centered in the PnvPHB4 device. PnvPhb4PecStack does not serve any purpose in the current code base. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20220114180719.52117-8-danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2025-01-27 15:29:28 +0100