summaryrefslogtreecommitdiffstats
path: root/linux-user/syscall.c
Commit message (Collapse)AuthorAgeFilesLines
* configure / meson: Move check for linux/btrfs.h to meson.buildThomas Huth2020-12-131-1/+1
| | | | | | | | | | | | This check can be done in a much shorter way in meson.build. And while we're at it, rename the #define to HAVE_BTRFS_H to match the other HAVE_someheader_H symbols that we already have. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20201118171052.308191-7-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* configure / meson: Move check for sys/kcov.h to meson.buildThomas Huth2020-12-131-1/+1
| | | | | | | | | | | | | This check can be done in a much shorter way in meson.build. And while we're at it, rename the #define to HAVE_SYS_KCOV_H to match the other HAVE_someheader_H symbols that we already have. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20201118171052.308191-6-thuth@redhat.com> [lv: s/signal/kcov/] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: Prevent crash in epoll_ctlLemonBoy2020-11-111-9/+17
| | | | | | | | | | | | | | | | From 894bb5172705e46a3a04c93b4962c0f0cafee814 Mon Sep 17 00:00:00 2001 From: Giuseppe Musacchio <thatlemon@gmail.com> Date: Fri, 17 Apr 2020 17:25:07 +0200 Subject: [PATCH] linux-user: Prevent crash in epoll_ctl The `event` parameter is ignored by the kernel if `op` is EPOLL_CTL_DEL, do the same and avoid returning EFAULT if garbage is passed instead of a valid pointer. Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <a244fa67-dace-abdb-995a-3198bd80fee8@gmail.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user/syscall: Fix missing target_to_host_timespec64() checkAlistair Francis2020-11-041-1/+3
| | | | | | | | | | | Coverity pointed out (CID 1432339) that target_to_host_timespec64() can fail with -TARGET_EFAULT but we never check the return value. This patch checks the return value and handles the error. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <cad74fae734d2562746b94acd9c34b00081c89bf.1604432881.git.alistair.francis@wdc.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: correct errno returned from accept4() syscallMatus Kysel2020-10-261-3/+3
| | | | | | | | | accept4() returned wrong errno, that did not match current linux Signed-off-by: Matus Kysel <mkysel@tachyum.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200930151616.3588165-1-mkysel@tachyum.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: remove _sysctlLaurent Vivier2020-10-261-6/+0Star
| | | | | | | | | | | | | It has been removed from linux since 61a47c1ad3a4 ("sysctl: Remove the sysctl system call") It's a good news because it was not really supported by qemu. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200930003033.554124-5-laurent@vivier.eu> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: Support f_flags in statfs64 when available.Frajo2020-10-231-0/+5
| | | | | | | | | | | | | | Same as d4247ec2d79ef2477cb886fa688706b068119736 but for statfs64 When running rpm within qemu-arm-dynamic this could cause rpm fail with an error like "installing package A needs B MB on the C filesystem" depending on what is in memory in f_flags. https://github.com/rpm-software-management/rpm/blob/af06db1d5558870f7fb8f5c502572c2d27af5c71/lib/transaction.c#L164 Signed-off-by: Franz-Josef Haider <franz.haider@jolla.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <2e405fe7-efab-dae5-93d6-02575773fd6e@jolla.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* Fix stack smashing when handling PR_GET_PDEATHSIGStephen Long2020-10-231-1/+1
| | | | | | | | | | | | | | | | | | The bug was triggered by the following code on aarch64-linux-user: int main(void) { int PDeathSig = 0; if (prctl(PR_GET_PDEATHSIG, &PDeathSig) == 0 && PDeathSig == SIGKILL) prctl(PR_GET_PDEATHSIG, 0); return (PDeathSig == SIGKILL); } Signed-off-by: Stephen Long <steplong@quicinc.com> Signed-off-by: Ana Pazos <apazos@quicinc.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200507130302.3684-1-steplong@quicinc.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user/: fix some comment spelling errorszhaolichang2020-09-171-2/+2
| | | | | | | | | | | I found that there are many spelling errors in the comments of qemu, so I used the spellcheck tool to check the spelling errors and finally found some spelling errors in the linux-user folder. Signed-off-by: zhaolichang <zhaolichang@huawei.com> Reviewed-by: Alex Bennee <alex.bennee@linaro.org> Message-Id: <20200917075029.313-7-zhaolichang@huawei.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: Map signal numbers in fcntlTimothy Baldwin2020-09-061-2/+8
| | | | | | | | | Map signal numbers in fcntl F_SETSIG and F_GETSIG. Signed-off-by: Timothy E Baldwin <T.E.Baldwin99@members.leeds.ac.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <72cc725c-f344-b7f1-d559-401867067d80@members.leeds.ac.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: Add support for ppoll_time64() and pselect6_time64()Filip Bozuta2020-09-051-210/+250
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces functionality for following time64 syscalls: *ppoll_time64 This is a year 2038 safe variant of: int poll(struct pollfd *fds, nfds_t nfds, int timeout) -- wait for some event on a file descriptor -- man page: https://man7.org/linux/man-pages/man2/ppoll.2.html *pselect6_time64 This is a year 2038 safe variant of: int pselect6(int nfds, fd_set *readfds, fd_set *writefds, fd_set *exceptfds, const struct timespec *timeout, const sigset_t *sigmask); -- synchronous I/O multiplexing -- man page: https://man7.org/linux/man-pages/man2/pselect6.2.html Implementation notes: Year 2038 safe syscalls in this patch were implemented with the same code as their regular variants (ppoll() and pselect()). This code was moved to new functions ('do_ppoll()' and 'do_pselect6()') that take a 'bool time64' from which a right 'struct timespec' converting function is called. (target_to_host/host_to_target_timespec() for regular and target_to_host/host_to_target_timespec64() for time64 variants) Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200824223050.92032-2-Filip.Bozuta@syrmia.com> [lv: rebase and fix do_pselect6()] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: Add support for a group of btrfs ioctls used for subvolumesFilip Bozuta2020-09-031-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements functionality of following ioctls: BTRFS_IOC_SUBVOL_CREATE - Creating a btrfs subvolume Create a btrfs subvolume. The subvolume is created using the ioctl's third argument which represents a pointer to a following structure type: struct btrfs_ioctl_vol_args { __s64 fd; char name[BTRFS_PATH_NAME_MAX + 1]; }; Before calling this ioctl, the fields of this structure should be filled with aproppriate values. The fd field represents the file descriptor value of the subvolume and the name field represents the subvolume path. BTRFS_IOC_SUBVOL_GETFLAGS - Getting subvolume flags Read the flags of the btrfs subvolume. The flags are read using the ioctl's third argument that is a pointer of __u64 (unsigned long). The third argument represents a bit mask that can be composed of following values: BTRFS_SUBVOL_RDONLY (1ULL << 1) BTRFS_SUBVOL_QGROUP_INHERIT (1ULL << 2) BTRFS_DEVICE_SPEC_BY_ID (1ULL << 3) BTRFS_SUBVOL_SPEC_BY_ID (1ULL << 4) BTRFS_IOC_SUBVOL_SETFLAGS - Setting subvolume flags Set the flags of the btrfs subvolume. The flags are set using the ioctl's third argument that is a pointer of __u64 (unsigned long). The third argument represents a bit mask that can be composed of same values as in the case of previous ioctl (BTRFS_IOC_SUBVOL_GETFLAGS). BTRFS_IOC_SUBVOL_GETINFO - Getting subvolume information Read information about the subvolume. The subvolume information is returned in the ioctl's third argument which represents a pointer to a following structure type: struct btrfs_ioctl_get_subvol_info_args { /* Id of this subvolume */ __u64 treeid; /* Name of this subvolume, used to get the real name at mount point */ char name[BTRFS_VOL_NAME_MAX + 1]; /* * Id of the subvolume which contains this subvolume. * Zero for top-level subvolume or a deleted subvolume. */ __u64 parent_id; /* * Inode number of the directory which contains this subvolume. * Zero for top-level subvolume or a deleted subvolume */ __u64 dirid; /* Latest transaction id of this subvolume */ __u64 generation; /* Flags of this subvolume */ __u64 flags; /* UUID of this subvolume */ __u8 uuid[BTRFS_UUID_SIZE]; /* * UUID of the subvolume of which this subvolume is a snapshot. * All zero for a non-snapshot subvolume. */ __u8 parent_uuid[BTRFS_UUID_SIZE]; /* * UUID of the subvolume from which this subvolume was received. * All zero for non-received subvolume. */ __u8 received_uuid[BTRFS_UUID_SIZE]; /* Transaction id indicating when change/create/send/receive happened */ __u64 ctransid; __u64 otransid; __u64 stransid; __u64 rtransid; /* Time corresponding to c/o/s/rtransid */ struct btrfs_ioctl_timespec ctime; struct btrfs_ioctl_timespec otime; struct btrfs_ioctl_timespec stime; struct btrfs_ioctl_timespec rtime; /* Must be zero */ __u64 reserved[8]; }; All of the fields of this structure are filled after the ioctl call. Implementation notes: Ioctls BTRFS_IOC_SUBVOL_CREATE and BTRFS_IOC_SUBVOL_GETINFO have structure types as third arguments. That is the reason why a corresponding definition are added in file 'linux-user/syscall_types.h'. The line '#include <linux/btrfs.h>' is added in file 'linux-user/syscall.c' to recognise preprocessor definitions for these ioctls. Since the file "linux/btrfs.h" was added in the kernel version 3.9, it is enwrapped in an #ifdef statement with parameter CONFIG_BTRFS which is defined in 'configure' if the header file is present. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Tested-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20200823195014.116226-2-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: Add support for utimensat_time64() and semtimedop_time64()Filip Bozuta2020-08-281-11/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces functionality for following time64 syscalls: *utimensat_time64() int utimensat(int dirfd, const char *pathname, const struct timespec times[2], int flags); -- change file timestamps with nanosecond precision -- man page: https://man7.org/linux/man-pages/man2/utimensat.2.html *semtimedop_time64() int semtimedop(int semid, struct sembuf *sops, size_t nsops, const struct timespec *timeout); -- System V semaphore operations -- man page: https://www.man7.org/linux/man-pages/man2/semtimedop.2.html Implementation notes: Syscall 'utimensat_time64()' is implemented in similar way as its regular variants only difference being that time64 converting function is used to convert values of 'struct timespec' between host and target ('target_to_host_timespec64()'). For syscall 'semtimedop_time64()' and additional argument is added in function 'do_semtimedop()' through which the aproppriate 'struct timespec' converting function is called (false for regular target_to_host_timespec() and true for target_to_host_timespec64()). For 'do_ipc()' a check was added as that additional argument: 'TARGET_ABI_BITS == 64'. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200824223050.92032-3-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: Add support for 'rt_sigtimedwait_time64()' and ↵Filip Bozuta2020-08-281-2/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'sched_rr_get_interval_time64()' This patch implements functionality for following time64 syscalls: *rt_sigtimedwait_time64() This is a year 2038 safe variant of syscall: int rt_sigtimedwait(const sigset_t *set, siginfo_t *info, const struct timespec *timeout, size_t sigsetsize) --synchronously wait for queued signals-- man page: https://man7.org/linux/man-pages/man2/rt_sigtimedwait.2.html *sched_rr_get_interval_time64() This is a year 2038 safe variant of syscall: int sched_rr_get_interval(pid_t pid, struct timespec *tp) --get the SCHED_RR interval for the named process-- man page: https://man7.org/linux/man-pages/man2/sched_rr_get_interval.2.html Implementation notes: These syscalls were implemented in similar ways like 'rt_sigtimedwait()' and 'sched_rr_get_interval()' except that functions 'target_to_host_timespec64()' and 'host_to_target_timespec64()' were used to convert values of 'struct timespec' between host and target. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200824192116.65562-3-Filip.Bozuta@syrmia.com> [lv: add missing defined(TARGET_NR_rt_sigtimedwait_time64)] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: Add support for 'clock_nanosleep_time64()' and 'clock_adjtime64()'Filip Bozuta2020-08-281-3/+139
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements functionality for following time64 syscall: *clock_nanosleep_time64() This is a year 2038 safe vairant of syscall: int clock_nanosleep(clockid_t clockid, int flags, const struct timespec *request, struct timespec *remain) --high-resolution sleep with specifiable clock-- man page: https://man7.org/linux/man-pages/man2/clock_nanosleep.2.html *clock_adjtime64() This is a year 2038 safe variant of syscall: int clock_adjtime(clockid_t clk_id, struct timex *buf) --tune kernel clock-- man page: https://man7.org/linux/man-pages/man2/clock_adjtime.2.html Implementation notes: Syscall 'clock_nanosleep_time64()' was implemented similarly to syscall 'clock_nanosleep()' except that 'host_to_target_timespec64()' and 'target_to_host_timespec64()' were used instead of the regular 'host_to_target_timespec()' and 'target_to_host_timespec()'. For 'clock_adjtime64()' a 64-bit target kernel version of 'struct timex' was defined in 'syscall_defs.h': 'struct target__kernel_timex'. This type was used to convert the values of 64-bit timex type between host and target. For this purpose a 64-bit timex converting functions 'target_to_host_timex64()' and 'host_to_target_timex64()'. An existing function 'copy_to_user_timeval64()' was used to convert the field 'time' which if of type 'struct timeval' from host to target. Function 'copy_from_user_timveal64()' was added in this patch and used to convert the 'time' field from target to host. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200824192116.65562-2-Filip.Bozuta@syrmia.com> [lv: add missing ifdef's] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: Add support for 'mq_timedsend_time64()' and ↵Filip Bozuta2020-08-271-2/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'mq_timedreceive_time64()' This patch implements functionality for following time64 syscalls: *mq_timedsend_time64() This is a year 2038 safe vairant of syscall: int mq_timedsend(mqd_t mqdes, const char *msg_ptr, size_t msg_len, unsigned int msg_prio, const struct timespec *abs_timeout) --send a message to a message queue-- man page: https://www.man7.org/linux/man-pages/man2/mq_timedsend.2.html *mq_timedreceive_time64() This is a year 2038 safe variant of syscall: ssize_t mq_timedreceive(mqd_t mqdes, char *msg_ptr, size_t msg_len, unsigned int *msg_prio, const struct timespec *abs_timeout) --receive a message from a message queue-- man page: https://man7.org/linux/man-pages/man3/mq_receive.3.html Implementation notes: These syscalls were implemented in similar ways like 'mq_timedsend()' and 'mq_timedreceive' except that functions 'target_to_host_timespec64()' and 'host_to_target_timespec64()' were used to convert values of 'struct timespec' between host and target. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200824193752.67950-3-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: fix target_to_host_timespec64()Laurent Vivier2020-08-271-0/+2
| | | | | | | | | | in 32 bit mode, drop the padding in tv_nsec. If host is 64bit and target is 32bit, the padding bytes will be copied from the target and as the kernel checks the value, the syscall exits with EINVAL. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200827070449.2386007-1-laurent@vivier.eu> Fixes: c6c8d1026e75 ("linux-user/syscall: Add support for clock_gettime64/clock_settime64")
* linux-user: Fix 'mq_timedsend()' and 'mq_timedreceive()'Filip Bozuta2020-08-271-4/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implementations of syscalls 'mq_timedsend()' and 'mq_timedreceive()' in 'syscall.c' use functions 'target_to_host_timespec()' and 'host_to_target_timespec()' to transfer the value of 'struct timespec' between target and host. However, the implementations don't check whether this conversion succeeds and thus can cause an unaproppriate error instead of the 'EFAULT (Bad address)' which is supposed to be set if the conversion from target to host fails. This was confirmed with the modified LTP test suite where test cases with a bad adress for 'timespec' were added. This modified test suite can be found at: https://github.com/bozutaf/ltp Without the changes from this patch the bad adress testcase for 'mq_timedsend()' succeds unexpectedly, while the test returns errno 'ETIMEOUT' for 'mq_timedreceive()': mq_timedsend01.c:190: FAIL: mq_timedsend() returned 0, expected -1: SUCCESS (0) mq_timedreceive01.c:178: FAIL: mq_timedreceive() failed unexpectedly, expected EFAULT: ETIMEDOUT (110) After the changes from this patch, testcases for both syscalls fail with EFAULT as expected, which is the same test result that is received with native execution: mq_timedsend01.c:187: PASS: mq_timedsend() failed expectedly: EFAULT (14) mq_timedreceive01.c:180: PASS: mq_timedreceive() failed expectedly: EFAULT (14) (Patch with this new test case will be sent to LTP mailing list soon) Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200824193752.67950-2-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: Add strace support for printing arguments for ioctls used for ↵Filip Bozuta2020-08-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | terminals and serial lines Functions "print_ioctl()" and "print_syscall_ret_ioctl()" are used to print arguments of "ioctl()" with "-strace". These functions use "thunk_print()", which is defined in "thunk.c", to print the contents of ioctl's third arguments that are not basic types. However, this function doesn't handle ioctls of group ioctl_tty which are used for terminals and serial lines. These ioctls use a type "struct termios" which thunk type is defined in a non standard way using "STRUCT_SPECIAL()". This means that this type is not decoded regularly using "thunk_convert()" and uses special converting functions "target_to_host_termios()" and "host_to_target_termios()", which are defined in "syscall.c" to decode it's values. For simillar reasons, this type is also not printed regularly using "thunk_print()". That is the reason why a separate printing function "print_termios()" is defined in file "strace.c". This function decodes and prints flag values of the "termios" structure. Implementation notes: Function "print_termios()" was implemented in "strace.c" using an existing function "print_flags()" to print flag values of "struct termios" fields. Also, recently implemented function "print_enums()" was also used to print enumareted values which are contained in the fields of 'struct termios'. These flag values were defined using an existing macro "FLAG_TARGET()" that generates aproppriate target flag values and string representations of these flags. Also, the recently defined macro "ENUM_TARGET()" was used to generate aproppriate enumarated values and their respective string representations. Function "print_termios()" was declared in "qemu.h" so that it can be accessed in "syscall.c". Type "StructEntry" defined in "exec/user/thunk.h" contains information that is used to decode structure values. Field "void print(void *arg)" was added in this structure as a special print function. Also, function "thunk_print()" was changed a little so that it uses this special print function in case it is defined. This printing function was instantiated with the defined "print_termios()" in "syscall.c" in "struct_termios_def". Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200723210233.349690-4-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: Add missing termbits types and values definitionsFilip Bozuta2020-08-271-16/+18
| | | | | | | | | | | | | | | | This patch introduces missing target types ('target_flag_t', 'target_cc_t', 'target_speed_t') in a few 'termibts.h' header files. Also, two missing values ('TARGET_IUTF8' and 'TARGET_EXTPROC') were also added. These values were also added in file 'syscall.c' in bitmask tables 'iflag_tbl[]' and 'lflag_tbl[]' which are used to convert values of 'struct termios' between target and host. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200723210233.349690-3-Filip.Bozuta@syrmia.com> [lv: keep TARGET_NCCS definition in xtensa/termbits.h] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: Add strace support for printing arguments of syscalls used to ↵Filip Bozuta2020-08-271-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | lock and unlock memory This patch implements strace argument printing functionality for following syscalls: * mlock, munlock, mlockall, munlockall - lock and unlock memory int mlock(const void *addr, size_t len) int munlock(const void *addr, size_t len) int mlockall(int flags) int munlockall(void) man page: https://man7.org/linux/man-pages/man2/mlock.2.html Implementation notes: Syscall mlockall() takes an argument that is composed of predefined values which represent flags that determine the type of locking operation that is to be performed. For that reason, a printing function "print_mlockall" was stated in file "strace.list". This printing function uses an already existing function "print_flags()" to print the "flags" argument. These flags are stated inside an array "mlockall_flags" that contains values of type "struct flags". These values are instantiated using an existing macro "FLAG_TARGET()" that crates aproppriate target flag values based on those defined in files '/target_syscall.h'. These target flag values were changed from "TARGET_MLOCKALL_MCL*" to "TARGET_MCL_*" so that they can be aproppriately set and recognised in "strace.c" with "FLAG_TARGET()". Value for "MCL_ONFAULT" was added in this patch. This value was also added in "syscall.c" in function "target_to_host_mlockall_arg()". Because this flag value was added in kernel version 4.4, it is enwrapped in an #ifdef directive (both in "syscall.c" and in "strace.c") as to support older kernel versions. The other syscalls have only primitive argument types, so the rest of the implementation was handled by stating an appropriate printing format in file "strace.list". Syscall mlock2() is not implemented in "syscall.c" and thus it's argument printing is not implemented in this patch. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200811164553.27713-4-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: Add strace support for printing arguments of ↵Filip Bozuta2020-08-271-32/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | truncate()/ftruncate() and getsid() This patch implements strace argument printing functionality for following syscalls: * truncate, ftruncate - truncate a file to a specified length int truncate/truncate64(const char *path, off_t length) int ftruncate/ftruncate64(int fd, off_t length) man page: https://man7.org/linux/man-pages/man2/truncate.2.html * getsid - get session ID pid_t getsid(pid_t pid) man page: https://man7.org/linux/man-pages/man2/getsid.2.html Implementation notes: Syscalls truncate/truncate64 take string argument types and thus a separate print function "print_truncate/print_truncate64" is stated in file "strace.list". This function is defined and implemented in "strace.c" by using an existing function used to print string arguments: "print_string()". For syscall ftruncate64, a separate printing function was also stated in "strace.c" as it requires a special kind of handling. The other syscalls have only primitive argument types, so the rest of the implementation was handled by stating an appropriate printing format in file "strace.list". Function "regpairs_aligned()" was cut & pasted from "syscall.c" to "qemu.h" as it is used by functions "print_truncate64()" and "print_ftruncate64()" to print the offset arguments of "truncate64()" and "ftruncate64()". Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200811164553.27713-3-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: Make cpu_env accessible in strace.cFilip Bozuta2020-08-271-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Variable "cpu_env" is used in file "syscall.c" to store the information about the cpu environment. This variable is used because values of some syscalls can vary between cpu architectures. This patch makes the "cpu_env" accessible in "strace.c" so it can enable aproppriate "-strace" argument printing for these syscalls. This will be a useful addition for future "-strace" implementation in QEMU. Implementation notes: Functions "print_syscall()" and "print_syscall_ret()" which are stated and defined in "qemu.h" and "strace.c" respectively are used to print syscall arguments before and after syscall execution. These functions were changed with addition of a new argument "void *cpu_env". Strucute "struct syscallname" in "strace.c" is used to store the information about syscalls. Fields "call" and "result" represent pointers to functions which are used to print syscall arguments before and after execution. These fields were also changed with addition of a new "void *" argumetn. Also, all defined "print_*" and "print_syscall_ret*" functions in "strace.c" were changed to have the new "void *cpu_env". This was done to not cause build errors (even though none of these functions use this argument). Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200811164553.27713-2-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: syscall: ioctls: support DRM_IOCTL_I915_GETPARAMChen Gang2020-08-271-0/+35
| | | | | | | | | Another DRM_IOCTL_I915 patches will be sent next. Signed-off-by: Chen Gang <chengang@emindsoft.com.cn> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200802133938.12055-1-chengang@emindsoft.com.cn> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: Fix 'clock_nanosleep()' implementationFilip Bozuta2020-08-271-3/+6
| | | | | | | | | | | | | | | | | | | Implementation of syscall 'clock_nanosleep()' in 'syscall.c' uses functions 'target_to_host_timespec()' and 'host_to_target_timespec()' to transfer the value of 'struct timespec' between target and host. However, the implementation doesn't check whether this conversion succeeds and thus can return an unaproppriate error instead of 'EFAULT' that is expected. This was confirmed with the modified LTP test suite where testcases with bad 'struct timespec' adress for 'clock_nanosleep()' were added. This modified LTP suite can be found at: https://github.com/bozutaf/ltp (Patch with this new test case will be sent to LTP mailing list soon) Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200727201326.401519-1-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: Fix 'semop()' and 'semtimedop()' implementationFilip Bozuta2020-08-271-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The implementations of syscalls 'semop()' and 'semtimedop()' in file 'syscall.c' use function 'target_to_host_sembuf()' to convert values of 'struct sembuf' from host to target. However, before this conversion it should be check whether the number of semaphore operations 'nsops' is not bigger than maximum allowed semaphor operations per syscall: 'SEMOPM'. In these cases, errno 'E2BIG' ("Arg list too long") should be set. But the implementation will set errno 'EFAULT' ("Bad address") in this case since the conversion from target to host in this case fails. This was confirmed with the LTP test for 'semop()' ('ipc/semop/semop02') in test case where 'nsops' is greater than SEMOPM with unaproppriate errno EFAULT: semop02.c:130: FAIL: semop failed unexpectedly; expected: E2BIG: EFAULT (14) This patch changes this by adding a check whether 'nsops' is bigger than 'SEMOPM' before the conversion function 'target_to_host_sembuf()' is called. After the changes from this patch, the test works fine along with the other LTP testcases for 'semop()'): semop02.c:126: PASS: semop failed as expected: E2BIG (7) Implementation notes: A target value ('TARGET_SEMOPM') was added for 'SEMOPM' as to be sure in case the value is not available for some targets. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200818180722.45089-1-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: Fix 'utimensat()' implementationFilip Bozuta2020-08-231-2/+7
| | | | | | | | | | | | | | | | | | Implementation of syscall 'utimensat()' in 'syscall.c' uses functions target_to_host/host_to_target_timespec() to convert values of 'struct timespec' between host and target. However, the implementation doesn't check whether the conversion succeeds and thus can cause an inappropriate error or succeed unappropriately instead of setting errno EFAULT ('Bad address') which is supposed to be set in these cases. This was confirmed with the LTP test for utimensat ('testcases/utimensat') which fails for test cases when the errno EFAULT is expected. After changes from this patch, the test passes for all test cases. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200811113101.6636-1-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: Add support for a group of 2038 safe syscallsFilip Bozuta2020-08-231-1/+138
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements functionality for following time64 syscalls: *clock_getres_time64 This a year 2038 safe variant of syscall: int clock_getres(clockid_t clockid, struct timespec *res) --finding the resoultion of a specified clock-- man page: https://man7.org/linux/man-pages/man2/clock_getres.2.html *timer_gettime64 *timer_settime64 These are year 2038 safe variants of syscalls: int timer_settime(timer_t timerid, int flags, const struct itimerspec *new_value, struct itimerspec *old_value) int timer_gettime(timer_t timerid, struct itimerspec *curr_value) --arming/dissarming and fetching state of POSIX per-process timer-- man page: https://man7.org/linux/man-pages/man2/timer_settime.2.html *timerfd_gettime64 *timerfd_settime64 These are year 2038 safe variants of syscalls: int timerfd_settime(int fd, int flags, const struct itimerspec *new_value, struct itimerspec *old_value) int timerfd_gettime(int fd, struct itimerspec *curr_value) --timers that notify via file descriptor-- man page: https://man7.org/linux/man-pages/man2/timerfd_settime.2.html Implementation notes: Syscall 'clock_getres_time64' was implemented similarly to 'clock_getres()'. The only difference was that for the conversion of 'struct timespec' from host to target, function 'host_to_target_timespec64()' was used instead of 'host_to_target_timespec()'. For other syscalls, new functions 'host_to_target_itimerspec64()' and 'target_to_host_itimerspec64()' were added to convert the value of the 'struct itimerspec' from host to target and vice versa. A new type 'struct target__kernel_itimerspec' was added in 'syscall_defs.h'. This type was defined with fields which are of the already defined type 'struct target_timespec'. This new 'struct target__kernel_itimerspec' type is used in these new converting functions. These new functions were defined similarly to 'host_to_target_itimerspec()' and 'target_to_host_itimerspec()' the only difference being that 'target_to_host_timespec64()' and 'host_to_target_timespec64()' were used. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200722153421.295411-3-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: Modify 'target_to_host/host_to_target_itimerspec()'Filip Bozuta2020-08-231-27/+19Star
| | | | | | | | | | | | | | | | Functions 'target_to_host_itimerspec()' and 'host_to_target_itimerspec()' are used to convert values of type 'struct itimerspec' between target and host. This type has 'struct timespec' as its fields. That is the reason why this patch introduces a little modification to the converting functions to be implemented using already existing functions that convert 'struct timespec': 'target_to_host_timespec()' and 'host_to_target_timespec()'. This makes the code of 'target_to_host_itimerspec()' and 'host_to_target_itimerspec()' more clean and readable. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200722153421.295411-2-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: Use getcwd syscall directlyAndreas Schwab2020-07-271-8/+1Star
| | | | | | | | | | | | | | | | | | The glibc getcwd function returns different errors than the getcwd syscall, which triggers an assertion failure in the glibc getcwd function when running under the emulation. When the syscall returns ENAMETOOLONG, the glibc wrapper uses a fallback implementation that potentially handles an unlimited path length, and returns with ERANGE if the provided buffer is too small. The qemu emulation cannot distinguish the two cases, and thus always returns ERANGE. This is unexpected by the glibc wrapper. Signed-off-by: Andreas Schwab <schwab@suse.de> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <mvmmu3qplvi.fsf@suse.de> [lv: updated description] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: Fix syscall rt_sigtimedwait() implementationFilip Bozuta2020-07-271-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implementation of 'rt_sigtimedwait()' in 'syscall.c' uses the function 'target_to_host_timespec()' to transfer the value of 'struct timespec' from target to host. However, the implementation doesn't check whether this conversion succeeds and thus can cause an unaproppriate error instead of the 'EFAULT (Bad address)' which is supposed to be set if the conversion from target to host fails. This was confirmed with the LTP test for rt_sigtimedwait: "/testcases/kernel/syscalls/rt_sigtimedwait/rt_sigtimedwait01.c" which causes an unapropriate error in test case "test_bad_adress3" which is run with a bad adress for the 'struct timespec' argument: FAIL: test_bad_address3 (349): Unexpected failure: EAGAIN/EWOULDBLOCK (11) The test fails with an unexptected errno 'EAGAIN/EWOULDBLOCK' instead of the expected EFAULT. After the changes from this patch, the test case is executed successfully along with the other LTP test cases for 'rt_sigtimedwait()': PASS: test_bad_address3 (349): Test passed Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200724181651.167819-1-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user, ppc: fix clock_nanosleep() for linux-user-ppcLaurent Vivier2020-07-271-7/+0Star
| | | | | | | | | | | | | Our safe_clock_nanosleep() returns -1 and updates errno. We don't need to update the CRF bit in syscall.c because it will be updated in ppc/cpu_loop.c as the return value is negative. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200722174612.2917566-3-laurent@vivier.eu> Message-Id: <20200724064509.331-14-alex.bennee@linaro.org>
* linux-user: fix clock_nanosleep()Laurent Vivier2020-07-271-1/+7
| | | | | | | | | | | | | | | | | | | | | If the call is interrupted by a signal handler, it fails with error EINTR and if "remain" is not NULL and "flags" is not TIMER_ABSTIME, it returns the remaining unslept time in "remain". Update linux-user to not overwrite the "remain" structure if there is no error. Found with "make check-tcg", linux-test fails on nanosleep test: TEST linux-test on x86_64 .../tests/tcg/multiarch/linux-test.c:242: nanosleep Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200722174612.2917566-2-laurent@vivier.eu> Message-Id: <20200724064509.331-13-alex.bennee@linaro.org>
* linux-user: refactor ipc syscall and support of semtimedop syscallMatus Kysel2020-07-131-7/+77
| | | | | | | | | | | | | | | Refactoring ipc syscall for s390x and SPARC, so it matches glibc implementation We should add support of semtimedop syscall as new version of glibc 2.31 uses semop based on semtimedop (commit: https://gitlab.com/freedesktop-sdk/mirrors/sourceware/glibc/-/commit/765cdd0bffd77960ae852104fc4ea5edcdb8aed3 ). Signed-off-by: Matus Kysel <mkysel@tachyum.com> Message-Id: <20200626124612.58593-2-mkysel@tachyum.com> Message-Id: <20200626124612.58593-3-mkysel@tachyum.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> [lv: merged PATCH 1 & 2 to avoid build break on PATCH 1] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: Use EPROTONOSUPPORT for unimplemented netlink protocolsJosh Kunz2020-07-131-1/+1
| | | | | | | | | | | | | | | | | | Linux uses the EPROTONOSUPPORT error code[1] if the users requests a netlink socket with an unsupported netlink protocol. This change switches linux-user to use the same code as Linux, instead of EPFNOSUPPORT (which AFAIK is just an anachronistic version of EAFNOSUPPORT). Tested by compiling all linux-user targets on x86. [1]: https://github.com/torvalds/linux/blob/bfe91da29bfad9941d5d703d45e29f0812a20724/net/netlink/af_netlink.c#L683 Signed-off-by: Josh Kunz <jkz@google.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200707001036.1671982-1-jkz@google.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* qom: Put name parameter before value / visitor parameterMarkus Armbruster2020-07-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
* linux-user: Add strace support for printing arguments of ioctl()Filip Bozuta2020-07-041-19/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements functionality for strace argument printing for ioctls. When running ioctls through qemu with "-strace", they get printed in format: "ioctl(fd_num,0x*,0x*) = ret_value" where the request code an the ioctl's third argument get printed in a hexadicemal format. This patch changes that by enabling strace to print both the request code name and the contents of the third argument. For example, when running ioctl RTC_SET_TIME with "-strace", with changes from this patch, it gets printed in this way: "ioctl(3,RTC_SET_TIME,{12,13,15,20,10,119,0,0,0}) = 0" In case of IOC_R type ioctls, the contents of the third argument get printed after the return value, and the argument inside the ioctl call gets printed as pointer in hexadecimal format. For example, when running RTC_RD_TIME with "-strace", with changes from this patch, it gets printed in this way: "ioctl(3,RTC_RD_TIME,0x40800374) = 0 ({22,9,13,11,5,120,0,0,0})" In case of IOC_RW type ioctls, the contents of the third argument get printed both inside the ioctl call and after the return value. Implementation notes: Functions "print_ioctl()" and "print_syscall_ret_ioctl()", that are defined in "strace.c", are listed in file "strace.list" as "call" and "result" value for ioctl. Structure definition "IOCTLEntry" as well as predefined values for IOC_R, IOC_W and IOC_RW were cut and pasted from file "syscall.c" to file "qemu.h" so that they can be used by these functions to print the contents of the third ioctl argument. Also, the "static" identifier for array "ioctl_entries[]" was removed and this array was declared as "extern" in "qemu.h" so that it can also be used by these functions. To decode the structure type of the ioctl third argument, function "thunk_print()" was defined in file "thunk.c" and its definition is somewhat simillar to that of function "thunk_convert()". Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200619124727.18080-3-filip.bozuta@syrmia.com> [lv: fix close-bracket] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: Add strace support for printing arguments of fallocate()Filip Bozuta2020-06-291-16/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements strace argument printing functionality for following syscall: *fallocate - manipulate file space int fallocate(int fd, int mode, off_t offset, off_t len) man page: https://www.man7.org/linux/man-pages/man2/fallocate.2.html Implementation notes: This syscall's second argument "mode" is composed of predefined values which represent flags that determine the type of operation that is to be performed on the file space. For that reason, a printing function "print_fallocate" was stated in file "strace.list". This printing function uses an already existing function "print_flags()" to print flags of the "mode" argument. These flags are stated inside an array "falloc_flags" that contains values of type "struct flags". These values are instantiated using an existing macro "FLAG_GENERIC()". Most of these flags are defined after kernel version 3.0 which is why they are enwrapped in an #ifdef directive. The syscall's third ant fourth argument are of type "off_t" which can cause variations between 32/64-bit architectures. To handle this variation, function "target_offset64()" was copied from file "strace.c" and used in "print_fallocate" to print "off_t" arguments for 32-bit architectures. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200619123331.17387-7-filip.bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: Extend strace support to enable argument printing after syscall ↵Filip Bozuta2020-06-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | execution Structure "struct syscallname" in file "strace.c" is used for "-strace" to print arguments and return values of syscalls. The last field of this structure "result" represents the calling function that prints the return values. This field was extended in this patch so that this function takes all syscalls arguments beside the return value. In this way, it enables "-strace" to print arguments of syscalls that have changed after the syscall execution. This extension will be useful as there are many syscalls that return values inside their arguments (i.e. listxattr() that returns the list of extended attributes inside the "list" argument). Implementation notes: Since there are already three existing "print_syscall_ret*" functions inside "strace.c" ("print_syscall_ret_addr()", "print_syscall_ret_adjtimex()", "print_syscall_ret_newselect()"), they were changed to have all syscall arguments beside the return value. This was done so that these functions don't cause build errors (even though syscall arguments are not used in these functions). There is code repetition in these functions for checking the return value and printing the approppriate error message (this code is also located in print_syscall_ret() at the end of "strace.c"). That is the reason why a function "syscall_print_err()" was added for this code and put inside these functions. Functions "print_newselect()" and "print_syscall_ret_newselect()" were changed to use this new implemented functionality and not store the syscall argument values in separate static variables. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200619123331.17387-2-filip.bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: syscall: ioctls: support DRM_IOCTL_VERSIONChen Gang2020-06-291-0/+98
| | | | | | | | | Another DRM_IOCTL_* commands will be done later. Signed-off-by: Chen Gang <chengang@emindsoft.com.cn> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200605013221.22828-1-chengang@emindsoft.com.cn> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* Merge remote-tracking branch ↵Peter Maydell2020-06-081-5/+28
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/vivier2/tags/linux-user-for-5.1-pull-request' into staging linux-user pull request 20200605-v2 Implement F_OFD_ fcntl() command, /proc/cpuinfo for hppa Fix socket(), prnctl() error codes, underflow in target_mremap, epoll_create() strace, oldumount for alpha User-mode build dependencies improvement # gpg: Signature made Sat 06 Jun 2020 14:15:36 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/linux-user-for-5.1-pull-request: stubs: Restrict ui/win32-kbd-hook to system-mode hw/core: Restrict CpuClass::get_crash_info() to system-mode target/s390x: Restrict CpuClass::get_crash_info() to system-mode target/i386: Restrict CpuClass::get_crash_info() to system-mode arch_init: Remove unused 'qapi-commands-misc.h' include exec: Assert CPU migration is not used on user-only build target/riscv/cpu: Restrict CPU migration to system-mode stubs/Makefile: Reduce the user-mode object list util/Makefile: Reduce the user-mode object list tests/Makefile: Restrict some softmmu-only tests tests/Makefile: Only display TCG-related tests when TCG is available configure: Avoid building TCG when not needed Makefile: Only build virtiofsd if system-mode is enabled linux-user: implement OFD locks linux-user/mmap.c: fix integer underflow in target_mremap linux-user/strace.list: fix epoll_create{,1} -strace output linux-user: Add support for /proc/cpuinfo on hppa platform linux-user: return target error codes for socket() and prctl() linux-user, alpha: fix oldumount syscall Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * linux-user: implement OFD locksAndreas Schwab2020-06-051-0/+6
| | | | | | | | | | | | | | Signed-off-by: Andreas Schwab <schwab@suse.de> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <mvm7dx0cun3.fsf@suse.de> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
| * linux-user: Add support for /proc/cpuinfo on hppa platformHelge Deller2020-06-051-2/+14
| | | | | | | | | | | | | | | | | | | | | | Provide our own /proc/cpuinfo file for the hppa (parisc) platform. Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200424210648.GA26715@ls3530.fritz.box> [lv: s/an/our/ and add TARGET_HPPA to guard is_proc()] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
| * linux-user: return target error codes for socket() and prctl()Helge Deller2020-05-271-2/+2
| | | | | | | | | | | | | | | | | | | | Return target error codes instead of host error codes. Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200424220033.GA28140@ls3530.fritz.box> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
| * linux-user, alpha: fix oldumount syscallLaurent Vivier2020-05-271-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we try to bootstrap debian/lenny for alpha, it fails because it cannot umount /.root directory: ... Setting up initscripts (2.86.ds1-61) ... umount: /.root: Function not implemented dpkg: error processing initscripts (--configure): subprocess post-installation script returned error exit status 1 dpkg: sysvinit: dependency problems, but configuring anyway as you request: sysvinit depends on initscripts; however: Package initscripts is not configured yet. This is because, when we switched from syscall_nr.h to syscall.tbl, the syscall #321 has been renamed from umount to oldumount and syscall.c has not been updated to manage the new name. oldumount has been introduced in linux 2.1.116pre1 by: 7d32756b2 ("Import 2.1.116pre1") ... * We now support a flag for forced unmount like the other 'big iron' * unixes. Our API is identical to OSF/1 to avoid making a mess of AMD ... Fixes: 6116aea994 ("linux-user, alpha: add syscall table generation support") Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200502194642.32823-1-laurent@vivier.eu> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* | linux-user: properly "unrealize" vCPU objectAlex Bennée2020-05-271-8/+11
|/ | | | | | | | | | | | | | | | | | | | We shouldn't be messing around with the CPU list in linux-user save for the very special case of do_fork(). When threads end we need to properly follow QOM object lifetime handling and allow the eventual cpu_common_unrealizefn to both remove the CPU and ensure any clean-up actions are taken place, for example calling plugin exit hooks. There is still a race condition to avoid so use the linux-user specific clone_lock instead of the cpu_list_lock to avoid it. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Nikolay Igotti <igotti@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Daniel P. Berrange <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Message-Id: <20200520140541.30256-14-alex.bennee@linaro.org>
* linux-user/syscall.c: add target-to-host mapping for epoll_create1()Sergei Trofimovich2020-04-161-1/+1
| | | | | | | | | | | | | | | | | | Noticed by Barnabás Virágh as a python-3.7 failue on qemu-alpha. The bug shows up on alpha as it's one of the targets where EPOLL_CLOEXEC differs from other targets: sysdeps/unix/sysv/linux/alpha/bits/epoll.h: EPOLL_CLOEXEC = 01000000 sysdeps/unix/sysv/linux/bits/epoll.h: EPOLL_CLOEXEC = 02000000 Bug: https://bugs.gentoo.org/717548 Reported-by: Barnabás Virágh Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> CC: Riku Voipio <riku.voipio@iki.fi> CC: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200415220508.5044-1-slyfox@gentoo.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: fix /proc/self/stat handlingAlex Bennée2020-04-151-24/+19Star
| | | | | | | | | | | | | | | | | | | | | | | | | In the original bug report long files names in Guix caused /proc/self/stat be truncated without the trailing ") " as specified in proc manpage which says: (2) comm %s The filename of the executable, in parentheses. This is visible whether or not the executable is swapped out. In the kernel this is currently done by do_task_stat calling proc_task_name() which uses a structure limited by TASK_COMM_LEN (16). Additionally it should only be reporting the executable name rather than the full path. Fix both these failings while cleaning up the code to use GString to build up the reported values. As the whole function is cleaned up also adjust the white space to the current coding style. Message-ID: <fb4c55fa-d539-67ee-c6c9-de8fb63c8488@inria.fr> Reported-by: Brice Goglin <Brice.Goglin@inria.fr> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200414200631.12799-10-alex.bennee@linaro.org>
* linux-user: clean-up padding on /proc/self/mapsAlex Bennée2020-04-071-13/+19
| | | | | | | | | Don't use magic spaces, calculate the justification for the file field like the kernel does with seq_pad. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200403191150.863-10-alex.bennee@linaro.org>
* linux-user: factor out reading of /proc/self/mapsAlex Bennée2020-04-071-30/+28Star
| | | | | | | | | | | | Unfortunately reading /proc/self/maps is still considered the gold standard for a process finding out about it's own memory layout. As we will want this data in other contexts soon factor out the code to read and parse the data. Rather than just blindly copying the existing sscanf based code we use a more modern glib version of the parsing code to make a more general purpose map structure. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20200403191150.863-9-alex.bennee@linaro.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-12-18 12:24:21 +0100