summaryrefslogtreecommitdiffstats
path: root/linux-user
Commit message (Collapse)AuthorAgeFilesLines
* linux-user/elfload: fix address calculation in fallback scenarioVincent Fazio2021-03-131-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Previously, guest_loaddr was not taken into account when returning an address from pgb_find_hole when /proc/self/maps was unavailable which caused an improper guest_base address to be calculated. This could cause a SIGSEGV later in load_elf_image -> target_mmap for ET_EXEC type images since the mmap MAP_FIXED flag is specified which could clobber existing mappings at the address returnd by g2h(). mmap(0xd87000, 16846912, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_NORESERVE|0x100000, -1, 0) = 0xd87000 munmap(0xd87000, 16846912) = 0 write(2, "Locating guest address space @ 0"..., 40Locating guest address space @ 0xd87000) = 40 mmap(0x1187000, 16850944, PROT_NONE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS|MAP_NORESERVE, -1, 0) = 0x1187000 --- SIGSEGV {si_signo=SIGSEGV, si_code=SEGV_ACCERR, si_addr=0x2188310} --- +++ killed by SIGSEGV +++ Now, pgd_find_hole accounts for guest_loaddr in this scenario. Fixes: ad592e37dfcc ("linux-user: provide fallback pgd_find_hole for bare chroots") Signed-off-by: Vincent Fazio <vfazio@gmail.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210131061948.15990-1-vfazio@xes-inc.com> [lv: updated it to check if ret == -1] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user/elfload: do not assume MAP_FIXED_NOREPLACE kernel supportVincent Fazio2021-03-131-2/+1Star
| | | | | | | | | | | | | | | | | Previously, pgd_find_hole_fallback assumed that if the build host's libc had MAP_FIXED_NOREPLACE defined that the address returned by mmap would match the requested address. This is not a safe assumption for Linux kernels prior to 4.17 Now, we always compare mmap's resultant address with the requested address and no longer short-circuit based on MAP_FIXED_NOREPLACE. Fixes: 2667e069e7b5 ("linux-user: don't use MAP_FIXED in pgd_find_hole_fallback") Signed-off-by: Vincent Fazio <vfazio@gmail.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210131061930.14554-1-vfazio@xes-inc.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user/elfload: munmap proper address in pgd_find_hole_fallbackVincent Fazio2021-03-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | Previously, if the build host's libc did not define MAP_FIXED_NOREPLACE or if the running kernel didn't support that flag, it was possible for pgd_find_hole_fallback to munmap an incorrect address which could lead to SIGSEGV if the range happened to overlap with the mapped address of the QEMU binary. mmap(0x1000, 22261224, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_NORESERVE, -1, 0) = 0x7f889d331000 munmap(0x1000, 22261224) = 0 --- SIGSEGV {si_signo=SIGSEGV, si_code=SEGV_MAPERR, si_addr=0x84b817} --- ++ killed by SIGSEGV +++ Now, always munmap the address returned by mmap. Fixes: 2667e069e7b5 ("linux-user: don't use MAP_FIXED in pgd_find_hole_fallback") Signed-off-by: Vincent Fazio <vfazio@gmail.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210131061849.12615-1-vfazio@xes-inc.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: manage binfmt-misc preserve-arg[0] flagLaurent Vivier2021-03-131-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add --preserve-argv0 in qemu-binfmt-conf.sh to configure the preserve-argv0 flag. This patch allows to use new flag in AT_FLAGS to detect if preserve-argv0 is configured for this interpreter: argv[0] (the full pathname provided by binfmt-misc) is removed and replaced by argv[1] (the original argv[0] provided by binfmt-misc when 'P'/preserve-arg[0] is set) For instance with this patch and kernel support for AT_FLAGS: $ sudo chroot m68k-chroot sh -c 'echo $0' sh without this patch: $ sudo chroot m68k-chroot sh -c 'echo $0' /usr/bin/sh The new flag is available in kernel (v5.12) since: 2347961b11d4 ("binfmt_misc: pass binfmt_misc flags to the interpreter") This can be tested with something like: # cp ..../qemu-ppc /chroot/powerpc/jessie # qemu-binfmt-conf.sh --qemu-path / --systemd ppc --credential yes \ --persistent no --preserve-argv0 yes # systemctl restart systemd-binfmt.service # cat /proc/sys/fs/binfmt_misc/qemu-ppc enabled interpreter //qemu-ppc flags: POC offset 0 magic 7f454c4601020100000000000000000000020014 mask ffffffffffffff00fffffffffffffffffffeffff # chroot /chroot/powerpc/jessie sh -c 'echo $0' sh # qemu-binfmt-conf.sh --qemu-path / --systemd ppc --credential yes \ --persistent no --preserve-argv0 no # systemctl restart systemd-binfmt.service # cat /proc/sys/fs/binfmt_misc/qemu-ppc enabled interpreter //qemu-ppc flags: OC offset 0 magic 7f454c4601020100000000000000000000020014 mask ffffffffffffff00fffffffffffffffffffeffff # chroot /chroot/powerpc/jessie sh -c 'echo $0' /bin/sh Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210222105004.1642234-1-laurent@vivier.eu>
* linux-user: Fix executable page of /proc/self/mapsNicolas Surbayrole2021-03-131-3/+3
| | | | | | | | | | | | | | The guest binary and libraries are not always map with the executable bit in the host process. The guest may read a /proc/self/maps with no executable address range. The perm fields should be based on the guest permission inside Qemu. Signed-off-by: Nicolas Surbayrole <nsurbayrole@quarkslab.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210308091959.986540-1-nsurbayrole@quarkslab.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* Merge remote-tracking branch ↵Peter Maydell2021-03-114-4/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/stsquad/tags/pull-testing-docs-xen-updates-100321-2' into staging Testing, guest-loader and other misc tweaks - add warning text to quickstart example - add CFI tests to CI - use --arch-only for docker pre-requisites - fix .editorconfig for emacs - add guest-loader for Xen-like hypervisor testing - move generic-loader docs into manual proper - move semihosting out of hw/ # gpg: Signature made Wed 10 Mar 2021 15:35:31 GMT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-testing-docs-xen-updates-100321-2: semihosting: Move hw/semihosting/ -> semihosting/ semihosting: Move include/hw/semihosting/ -> include/semihosting/ tests/avocado: add boot_xen tests docs: add some documentation for the guest-loader docs: move generic-loader documentation into the main manual hw/core: implement a guest-loader to support static hypervisor guests device_tree: add qemu_fdt_setprop_string_array helper hw/riscv: migrate fdt field to generic MachineState hw/board: promote fdt from ARM VirtMachineState to MachineState .editorconfig: update the automatic mode setting for Emacs tests/docker: Use --arch-only when building Debian cross image gitlab-ci.yml: Add jobs to test CFI flags gitlab-ci.yml: Allow custom # of parallel linkers tests/docker: add a test-tcg for building then running check-tcg docs/system: add a gentle prompt for the complexity to come Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * semihosting: Move include/hw/semihosting/ -> include/semihosting/Philippe Mathieu-Daudé2021-03-104-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We want to move the semihosting code out of hw/ in the next patch. This patch contains the mechanical steps, created using: $ git mv include/hw/semihosting/ include/ $ sed -i s,hw/semihosting,semihosting, $(git grep -l hw/semihosting) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210226131356.3964782-2-f4bug@amsat.org> Message-Id: <20210305135451.15427-2-alex.bennee@linaro.org>
* | Merge remote-tracking branch ↵Peter Maydell2021-03-1013-1007/+2Star
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/thuth-gitlab/tags/pull-request-2021-03-09' into staging * Add some missing gitlab-CI job dependencies * Re-enable "make check SPEED=slow" * Improve the gitlab-pipeline-status script * Clean up inclusing of qtest.h headers * Improve libqos/qgraph documentation * Fix downloading problem in the acceptance tests * Remove deprecated target tilegx * Add new bsd-user maintainers # gpg: Signature made Tue 09 Mar 2021 10:27:29 GMT # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/thuth-gitlab/tags/pull-request-2021-03-09: bsd-user: Add new maintainers Remove deprecated target tilegx Acceptance Tests: restore filtering of tests by target arch Acceptance Tests: restore downloading of VM images docs/devel/qgraph: improve qgraph documentation libqos/qgraph: format qgraph comments for sphinx documentation scripts/ci/gitlab-pipeline-status: give more info when pipeline not found scripts/ci/gitlab-pipeline-status: give more information on failures scripts/ci/gitlab-pipeline-status: split utlity function for HTTP GET meson: Re-enable the possibility to run "make check SPEED=slow" docker: OpenSBI build job depends on OpenSBI container docker: EDK2 build job depends on EDK2 container docker: Alpine build job depends on Alpine container qtest: delete superfluous inclusions of qtest.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * Remove deprecated target tilegxThomas Huth2021-03-0913-1007/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TILE-Gx was only implemented in linux-user mode, but support for this CPU was removed from the upstream Linux kernel in 2018, and it has also been dropped from glibc, so there is no new Linux development taking place with this architecture. For running the old binaries, users can simply use older versions of QEMU. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210224183952.80463-1-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
* | accel/tcg: Precompute curr_cflags into cpu->tcg_cflagsRichard Henderson2021-03-063-11/+16
|/ | | | | | | | | The primary motivation is to remove a dozen insns along the fast-path in tb_lookup. As a byproduct, this allows us to completely remove parallel_cpus. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Hexagon (linux-user/hexagon) Linux user emulationTaylor Simpson2021-02-1814-0/+1011
| | | | | | | | | | | | Implementation of Linux user emulation for Hexagon Some common files modified in addition to new files in linux-user/hexagon Acked-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1612763186-18161-31-git-send-email-tsimpson@quicinc.com> [rth: Fix termbits.h on review by Laurent] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* linux-user/aarch64: Signal SEGV_MTEAERR for async tag check errorRichard Henderson2021-02-162-0/+12
| | | | | | | | | | | | | | | | | | The real kernel collects _TIF_MTE_ASYNC_FAULT into the current thread's state on any kernel entry (interrupt, exception etc), and then delivers the signal in advance of resuming the thread. This means that while the signal won't be delivered immediately, it will not be delayed forever -- at minimum it will be delivered after the next clock interrupt. We don't have a clock interrupt in linux-user, so we issue a cpu_kick to signal a return to the main loop at the end of the current TB. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-29-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* linux-user/aarch64: Signal SEGV_MTESERR for sync tag check faultRichard Henderson2021-02-162-0/+5
| | | | | | | Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-28-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* linux-user/aarch64: Pass syndrome to EXC_*_ABORTRichard Henderson2021-02-161-3/+21
| | | | | | | | | | A proper syndrome is required to fill in the proper si_code. Use page_get_flags to determine permission vs translation for user-only. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-27-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* linux-user/aarch64: Implement PROT_MTERichard Henderson2021-02-162-8/+15
| | | | | | | | | | Remember the PROT_MTE bit as PAGE_MTE/PAGE_TARGET_2. Otherwise this does not yet have effect. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-25-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* linux-user/aarch64: Implement PR_MTE_TCF and PR_MTE_TAGRichard Henderson2021-02-162-0/+52
| | | | | | | | | These prctl fields are required for the function of MTE. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-24-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* linux-user/aarch64: Implement PR_TAGGED_ADDR_ENABLERichard Henderson2021-02-162-0/+28
| | | | | | | | | | | This is the prctl bit that controls whether syscalls accept tagged addresses. See Documentation/arm64/tagged-address-abi.rst in the linux kernel. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-21-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* linux-user: Handle tags in lock_user/unlock_userRichard Henderson2021-02-161-13/+14
| | | | | | | | | | Resolve the untagged address once, using thread_cpu. Tidy the DEBUG_REMAP code using glib routines. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-20-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* linux-user: Fix types in uaccess.cRichard Henderson2021-02-162-29/+28Star
| | | | | | | | | | | | | | For copy_*_user, only 0 and -TARGET_EFAULT are returned; no need to involve abi_long. Use size_t for lengths. Use bool for the lock_user copy argument. Use ssize_t for target_strlen, because we can't overflow the host memory space. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210212184902.1251044-19-richard.henderson@linaro.org [PMM: moved fix for ifdef error to previous commit] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* linux-user: Move lock_user et al out of lineRichard Henderson2021-02-162-40/+53
| | | | | | | | | | | | | These functions are not small, except for unlock_user without debugging enabled. Move them out of line, and add missing braces on the way. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210212184902.1251044-18-richard.henderson@linaro.org [PMM: fixed the sense of an ifdef test in qemu.h] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* linux-user: Use cpu_untagged_addr in access_ok; split out *_untaggedRichard Henderson2021-02-166-13/+24
| | | | | | | | | | | Provide both tagged and untagged versions of access_ok. In a few places use thread_cpu, as the user is several callees removed from do_syscall1. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* exec: Rename guest_{addr,range}_valid to *_untaggedRichard Henderson2021-02-163-10/+10
| | | | | | | | | | | The places that use these are better off using untagged addresses, so do not provide a tagged versions. Rename to make it clear about the address type. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-16-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* linux-user: Use guest_range_valid in access_okRichard Henderson2021-02-161-6/+3Star
| | | | | | | | | | We're currently open-coding the range check in access_ok; use guest_range_valid when size != 0. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-15-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* linux-user: Explicitly untag memory management syscallsRichard Henderson2021-02-161-0/+11
| | | | | | | | | | | | | | We define target_mmap et al as untagged, so that they can be used from the binary loaders. Explicitly call cpu_untagged_addr for munmap, mprotect, mremap syscall entry points. Add a few comments for the syscalls that are exempted by the kernel's tagged-address-abi.rst. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* exec: Use cpu_untagged_addr in g2h; split out g2h_untaggedRichard Henderson2021-02-168-84/+92
| | | | | | | | | | | | | | | | | | | | | | | Use g2h_untagged in contexts that have no cpu, e.g. the binary loaders that operate before the primary cpu is created. As a colollary, target_mmap and friends must use untagged addresses, since they are used by the loaders. Use g2h_untagged on values returned from target_mmap, as the kernel never applies a tag itself. Use g2h_untagged on all pc values. The only current user of tags, aarch64, removes tags from code addresses upon branch, so "pc" is always untagged. Use g2h with the cpu context on hand wherever possible. Use g2h_untagged in lock_user, which will be updated soon. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* linux-user: Tidy VERIFY_READ/VERIFY_WRITERichard Henderson2021-02-161-5/+3Star
| | | | | | | | | | | These constants are only ever used with access_ok, and friends. Rather than translating them to PAGE_* bits, let them equal the PAGE_* bits to begin. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* linux-user: Check for overflow in access_okRichard Henderson2021-02-161-5/+12
| | | | | | | | | Verify that addr + size - 1 does not wrap around. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* exec: Use uintptr_t for guest_baseRichard Henderson2021-02-162-4/+4
| | | | | | | | | | | This is more descriptive than 'unsigned long'. No functional change, since these match on all linux+bsd hosts. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210212184902.1251044-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* linux-user: Introduce PAGE_ANONRichard Henderson2021-02-161-0/+3
| | | | | | | | | | | | | | | | | | | Record whether the backing page is anonymous, or if it has file backing. This will allow us to get close to the Linux AArch64 ABI for MTE, which allows tag memory only on ram-backed VMAs. The real ABI allows tag memory on files, when those files are on ram-backed filesystems, such as tmpfs. We will not be able to implement that in QEMU linux-user. Thankfully, anonymous memory for malloc arenas is the primary consumer of this feature, so this restricted version should still be of use. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* tcg: Introduce target-specific page data for user-onlyRichard Henderson2021-02-162-3/+5
| | | | | | | | | | | | This data can be allocated by page_alloc_target_data() and released by page_set_flags(start, end, prot | PAGE_RESET). This data will be used to hold tag memory for AArch64 MTE. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* linux-user/mips: Support the n32 ABI for the R5900Fredrik Noring2021-02-151-0/+3
| | | | | | | | | | | | Recognise the R5900, which reports itself as MIPS III, as a 64-bit CPU supporting the n32 ABI. Signed-off-by: Fredrik Noring <noring@nocrew.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <5bea109f0c140da6a821aa7f9705d4b3717e86dc.1541701393.git.noring@nocrew.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: target: signal: Support TARGET_SS_AUTODISARMChen Gang2021-02-136-0/+34
| | | | | | | | | Add definitions to pass building. Signed-off-by: Chen Gang <chengang@emindsoft.com.cn> Message-Id: <20201008043105.21058-1-chengang@emindsoft.com.cn> [lv: added the definitions in linux-user/generic/signal.h too] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: add TARGET_SO_{DOMAIN,PROTOCOL}Jason A. Donenfeld2021-02-133-0/+11
| | | | | | | | | | | These were defined for other platforms but mistakenly left out of mips and generic, so this commit adds them to the places missing. Then it makes them be translated in getsockopt. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210204153925.2030606-1-Jason@zx2c4.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user/syscall: Fix do_ioctl_ifconf() for 64 bit targets.Stefan2021-02-131-1/+2
| | | | | | | | | | | | | | | | | | The sizeof(struct ifreq) is 40 for 64 bit and 32 for 32 bit architectures. This structure contains a union of other structures, of which struct ifmap is the biggest for 64 bit architectures. Calling ioclt(…, SIOCGIFCONF, …) fills a struct sockaddr of that union, and do_ioctl_ifconf() only considered that struct sockaddr for the size of the union, which has the same size as struct ifmap on 32 bit architectures. So do_ioctl_ifconf() assumed a wrong size of 32 for struct ifreq instead of the correct size of 40 on 64 bit architectures. The fix makes do_ioctl_ifconf() handle struct ifmap as the biggest part of the union, treating struct ifreq with the correct size. Signed-off-by: Stefan <stefan-guix@vodafonemail.de> Message-Id: <60AA0765-53DD-43D1-A3D2-75F1778526F6@vodafonemail.de> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user/mmap: Avoid asserts for out of range mremap callsRichard Purdie2021-02-131-1/+3
| | | | | | | | | | | | | | | | | | | If mremap() is called without the MREMAP_MAYMOVE flag with a start address just before the end of memory (reserved_va) where new_size would exceed it (and GUEST_ADDR_MAX), the assert(end - 1 <= GUEST_ADDR_MAX) in  page_set_flags() would trigger. Add an extra guard to the guest_range_valid() checks to prevent this and avoid asserting binaries when reserved_va is set. This meant a bug I was seeing locally now gives the same behaviour  regardless of whether reserved_va is set or not. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <70c46e7b999bafbb01d54bfafd44b420d0b782e9.camel@linuxfoundation.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: Fix loading of BSS segmentsGiuseppe Musacchio2021-02-131-10/+20
| | | | | | | | | | | | | | | | | | | | | | | Some ELF binaries encode the .bss section as an extension of the data ones by setting the segment p_memsz > p_filesz. Some other binaries take a different route and encode it as a stand-alone PT_LOAD segment with p_filesz = 0 and p_memsz > 0. Both the encodings are actually correct per ELF specification but the ELF loader had some troubles in handling the former: with the old logic it was very likely to get Qemu to crash in zero_bss when trying to access unmapped memory. zero_bss isn't meant to allocate whole zero-filled segments but to "complete" a previously mapped segment with the needed zero bits. The fix is pretty simple, if the segment is completely zero-filled we simply allocate one or more pages (according to p_memsz) and avoid calling zero_bss altogether. Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com> Message-Id: <c9106487-dc4d-120a-bd48-665b3c617287@gmail.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: fix O_NONBLOCK in signalfd4() and eventfd2() syscallsHelge Deller2021-02-132-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | On the hppa target userspace binaries may call signalfd4() and eventfd2() with an old TARGET_O_NONBLOCK value of 000200004 instead of 000200000 for the "mask" syscall parameter, in which case the current emulation doesn't handle the translation to the native O_NONBLOCK value correctly. The 0x04 bit is not masked out before the new O_NONBLOCK bit is set and as such when calling the native syscall errors out with EINVAL. Fix this by introducing TARGET_O_NONBLOCK_MASK which is used to mask off all possible bits. This define defaults to TARGET_O_NONBLOCK when not defined otherwise, so for all other targets the implementation will behave as before. This patch needs to be applied on top of my previous two patches. Bug was found and patch was verified by using qemu-hppa as debian buildd server on x86_64. Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210210061214.GA221322@ls3530.fritz.box> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: fix O_NONBLOCK usage for hppa targetHelge Deller2021-02-131-1/+1
| | | | | | | | | | | | | | | | | | | Historically the parisc linux port tried to be compatible with HP-UX userspace and as such defined the O_NONBLOCK constant to 0200004 to emulate separate NDELAY & NONBLOCK values. Since parisc was the only Linux platform which had two bits set, this produced various userspace issues. Finally it was decided to drop the (never completed) HP-UX compatibilty, which is why O_NONBLOCK was changed upstream to only have one bit set in future with this commit: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=75ae04206a4d0e4f541c1d692b7febd1c0fdb814 This patch simply adjusts the value for qemu-user too. Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210201220551.GA8015@ls3530.fritz.box> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: Add missing TARGET___O_TMPFILE for hppa and alphaHelge Deller2021-02-132-0/+2
| | | | | | | | | | | | | | | | The hppa and alpha targets miss the #define of the TARGET___O_TMPFILE and as such fail to run a trivial symlink command like ln -s /bin/bash /tmp which results in an -EINVAL return code. Adding the define fixes the problem. Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210201155922.GA18291@ls3530.fritz.box> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user/signal: Decode waitid si_codeAlistair Francis2021-02-131-2/+1Star
| | | | | | | | | | | | | | | | | | When mapping the host waitid status to the target status we previously just used decoding information in the status value. This doesn't follow what the waitid documentation describes, which instead suggests using the si_code value for the decoding. This results in the incorrect values seen when calling waitid. This is especially apparent on RV32 where all wait calls use waitid (see the bug case). This patch just passes the waitid status directly back to the guest. Buglink: https://bugs.launchpad.net/qemu/+bug/1906193 Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Andreas K. Hüttel <dilfridge@gentoo.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <1fb2d56aa23a81f4473e638abe9e2d78c09a3d5b.1611080607.git.alistair.francis@wdc.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user/mips64: Support o32 ABI syscallsPhilippe Mathieu-Daudé2021-02-131-1/+4
| | | | | | | | | | o32 ABI syscalls start at offset 4000. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20201119161710.1985083-3-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user/mips64: Restore setup_frame() for o32 ABIPhilippe Mathieu-Daudé2021-02-131-0/+4
| | | | | | | | | | | | | 64-bit MIPS targets lost setup_frame() during the refactor in commit 8949bef18b9. Restore it declaring TARGET_ARCH_HAS_SETUP_FRAME, to be able to build the o32 ABI target. Fixes: 8949bef18b9 ("linux-user: move mips/mips64 signal.c parts to mips directory") Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20201119161710.1985083-2-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* accel: replace struct CpusAccel with AccelOpsClassClaudio Fontana2021-02-051-0/+1
| | | | | | | | | | | | | | | This will allow us to centralize the registration of the cpus.c module accelerator operations (in accel/accel-softmmu.c), and trigger it automatically using object hierarchy lookup from the new accel_init_interfaces() initialization step, depending just on which accelerators are available in the code. Rename all tcg-cpus.c, kvm-cpus.c, etc to tcg-accel-ops.c, kvm-accel-ops.c, etc, matching the object type names. Signed-off-by: Claudio Fontana <cfontana@suse.de> Message-Id: <20210204163931.7358-18-cfontana@suse.de> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel: extend AccelState and AccelClass to user-modeClaudio Fontana2021-02-051-1/+5
| | | | | | | | | | | Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> [claudio: rebased on Richard's splitwx work] Signed-off-by: Claudio Fontana <cfontana@suse.de> Message-Id: <20210204163931.7358-17-cfontana@suse.de> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* linux-user: Remove obsolete F_SHLCK and F_EXLCK translationMichael Forney2021-01-213-9/+0Star
| | | | | | | | | | | | | | | | | These lock types are unsupported by Linux since v2.2[0][1] and always return EINVAL (except on SPARC up until v2.6, which just warned). musl libc does not define these constants, so just remove them from the translation cases. [0] https://github.com/mpe/linux-fullhistory/blob/v2.2.0/fs/locks.c#L322-L324 [1] https://github.com/mpe/linux-fullhistory/blob/v2.2.0/fs/locks.c#L429-L445 Signed-off-by: Michael Forney <mforney@mforney.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210114223602.9004-1-mforney@mforney.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: Add IPv6 options to do_print_sockopt()Shu-Chun Weng2021-01-211-0/+109
| | | | | | | | Signed-off-by: Shu-Chun Weng <scw@google.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20201218193213.3566856-5-scw@google.com> [lv: Add missing <linux/in6.h> include for IPV6_ADDR_PREFERENCES] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: add missing IPv6 get/setsockopt optionShu-Chun Weng2021-01-201-0/+4
| | | | | | | | | | | IPV6_ADDR_PREFERENCES (RFC5014: Source address selection) was not supported. Signed-off-by: Shu-Chun Weng <scw@google.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20201218193213.3566856-4-scw@google.com> [PMD: Add missing <linux/in6.h> include for IPV6_ADDR_PREFERENCES] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: add missing UDP get/setsockopt optionShu-Chun Weng2021-01-202-2/+11
| | | | | | | | | | SOL_UDP manipulate options at UDP level. All six options currently defined in linux source include/uapi/linux/udp.h take integer values. Signed-off-by: Shu-Chun Weng <scw@google.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20201218193213.3566856-3-scw@google.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* linux-user: Support F_ADD_SEALS and F_GET_SEALS fcntlsShu-Chun Weng2021-01-203-13/+50
| | | | | | | | | Also reorder blocks so that they are all in the same order everywhere. Signed-off-by: Shu-Chun Weng <scw@google.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20201218193213.3566856-2-scw@google.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* riscv: Add semihosting support for user modeKito Cheng2021-01-181-0/+5
| | | | | | | | | | | | | | | This could made testing more easier and ARM/AArch64 has supported on their linux user mode too, so I think it should be reasonable. Verified GCC testsuite with newlib/semihosting. Signed-off-by: Kito Cheng <kito.cheng@sifive.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Keith Packard <keithp@keithp.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210107170717.2098982-7-keithp@keithp.com> Message-Id: <20210108224256.2321-18-alex.bennee@linaro.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-12-18 07:47:30 +0100