summaryrefslogtreecommitdiffstats
path: root/nbd
Commit message (Collapse)AuthorAgeFilesLines
* nbd: server: Report holes for raw imagesNir Soffer2021-03-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When querying image extents for raw image, qemu-nbd reports holes as zero: $ qemu-nbd -t -r -f raw empty-6g.raw $ qemu-img map --output json nbd://localhost [{ "start": 0, "length": 6442450944, "depth": 0, "zero": true, "data": true, "offset": 0}] $ qemu-img map --output json empty-6g.raw [{ "start": 0, "length": 6442450944, "depth": 0, "zero": true, "data": false, "offset": 0}] Turns out that qemu-img map reports a hole based on BDRV_BLOCK_DATA, but nbd server reports a hole based on BDRV_BLOCK_ALLOCATED. The NBD protocol says: NBD_STATE_HOLE (bit 0): if set, the block represents a hole (and future writes to that area may cause fragmentation or encounter an NBD_ENOSPC error); if clear, the block is allocated or the server could not otherwise determine its status. qemu-img manual says: whether the sectors contain actual data or not (boolean field data; if false, the sectors are either unallocated or stored as optimized all-zero clusters); To me, data=false looks compatible with NBD_STATE_HOLE. From user point of view, getting same results from qemu-nbd and qemu-img is more important than being more correct about allocation status. Changing nbd server to report holes using BDRV_BLOCK_DATA makes qemu-nbd results compatible with qemu-img map: $ qemu-img map --output json nbd://localhost [{ "start": 0, "length": 6442450944, "depth": 0, "zero": true, "data": false, "offset": 0}] Signed-off-by: Nir Soffer <nsoffer@redhat.com> Message-Id: <20210219160752.1826830-1-nsoffer@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
* nbd/server: Quiesce coroutines on context switchSergio Lopez2021-01-201-14/+106
| | | | | | | | | | | | | | | | | | | | | | | | | | | When switching between AIO contexts we need to me make sure that both recv_coroutine and send_coroutine are not scheduled to run. Otherwise, QEMU may crash while attaching the new context with an error like this one: aio_co_schedule: Co-routine was already scheduled in 'aio_co_schedule' To achieve this we need a local implementation of 'qio_channel_readv_all_eof' named 'nbd_read_eof' (a trick already done by 'nbd/client.c') that allows us to interrupt the operation and to know when recv_coroutine is yielding. With this in place, we delegate detaching the AIO context to the owning context with a BH ('nbd_aio_detach_bh') scheduled using 'aio_wait_bh_oneshot'. This BH signals that we need to quiesce the channel by setting 'client->quiescing' to 'true', and either waits for the coroutine to finish using AIO_WAIT_WHILE or, if it's yielding in 'nbd_read_eof', actively enters the coroutine to interrupt it. RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1900326 Signed-off-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20201214170519.223781-4-slp@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
* Merge remote-tracking branch ↵Peter Maydell2020-11-171-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/huth-gitlab/tags/pull-request-2020-11-17' into staging * Fixes for compiling on Haiku, and add Haiku VM for compile-testing * Update NetBSD VM to version 9.1 * Misc fixes (e.g. categorize some devices) # gpg: Signature made Tue 17 Nov 2020 09:20:31 GMT # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/huth-gitlab/tags/pull-request-2020-11-17: max111x: put it into the 'misc' category nand: put it into the 'storage' category ads7846: put it into the 'input' category ssd0323: put it into the 'display' category gitlab-ci: Use $CI_REGISTRY instead of hard-coding registry.gitlab.com target/microblaze: Fix possible array out of bounds in mmu_write() tests/vm: update NetBSD to 9.1 tests/vm: Add Haiku test based on their vagrant images configure: Add a proper check for sys/ioccom.h and use it in tpm_ioctl.h configure: Do not build pc-bios/optionrom on Haiku configure: Fix the _BSD_SOURCE define for the Haiku build qemu/bswap: Remove unused qemu_bswap_len() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * configure: Add a proper check for sys/ioccom.h and use it in tpm_ioctl.hThomas Huth2020-11-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | On Solaris and Haiku, the _IO() macros are defined in <sys/ioccom.h>. Add a proper check for this header to our build system, and make sure to include the header in tpm_ioctl.h to fix a build failure on Solaris and Haiku. Message-Id: <20201115152317.42752-1-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
* | nbd: Silence Coverity false positiveEric Blake2020-11-161-2/+2
|/ | | | | | | | | | | | | | Coverity noticed (CID 1436125) that we check the return value of nbd_extent_array_add in most places, but not at the end of bitmap_to_extents(). The return value exists to break loops before a future iteration, so there is nothing to check if we are already done iterating. Adding a cast to void, plus a comment why, pacifies Coverity. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20201111163510.713855-1-eblake@redhat.com> [eblake: Prefer cast to void over odd && usage] Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
* nbd: Add 'qemu-nbd -A' to expose allocation depthEric Blake2020-10-301-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Allow the server to expose an additional metacontext to be requested by savvy clients. qemu-nbd adds a new option -A to expose the qemu:allocation-depth metacontext through NBD_CMD_BLOCK_STATUS; this can also be set via QMP when using block-export-add. qemu as client is hacked into viewing the key aspects of this new context by abusing the already-experimental x-dirty-bitmap option to collapse all depths greater than 2, which results in a tri-state value visible in the output of 'qemu-img map --output=json' (yes, that means x-dirty-bitmap is now a bit of a misnomer, but I didn't feel like renaming it as it would introduce a needless break of back-compat, even though we make no compat guarantees with x- members): unallocated (depth 0) => "zero":false, "data":true local (depth 1) => "zero":false, "data":false backing (depth 2+) => "zero":true, "data":true libnbd as client is probably a nicer way to get at the information without having to decipher such hacks in qemu as client. ;) Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20201027050556.269064-11-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
* nbd: Add new qemu:allocation-depth metadata contextEric Blake2020-10-301-4/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'qemu-img map' provides a way to determine which extents of an image come from the top layer vs. inherited from a backing chain. This is useful information worth exposing over NBD. There is a proposal to add a QMP command block-dirty-bitmap-populate which can create a dirty bitmap that reflects allocation information, at which point the qemu:dirty-bitmap:NAME metadata context can expose that information via the creation of a temporary bitmap, but we can shorten the effort by adding a new qemu:allocation-depth metadata context that does the same thing without an intermediate bitmap (this patch does not eliminate the need for that proposal, as it will have other uses as well). While documenting things, remember that although the NBD protocol has NBD_OPT_SET_META_CONTEXT, the rest of its documentation refers to 'metadata context', which is a more apt description of what is actually being used by NBD_CMD_BLOCK_STATUS: the user is requesting metadata by passing one or more context names. So I also touched up some existing wording to prefer the term 'metadata context' where it makes sense. Note that this patch does not actually enable any way to request a server to enable this context; that will come in the next patch. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20201027050556.269064-10-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
* nbd: Allow export of multiple bitmaps for one deviceEric Blake2020-10-301-30/+70
| | | | | | | | | | | With this, 'qemu-nbd -B b0 -B b1 -f qcow2 img.qcow2' can let you sniff out multiple bitmaps from one server. qemu-img as client can still only read one bitmap per client connection, but other NBD clients (hello libnbd) can now read multiple bitmaps in a single pass. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20201027050556.269064-8-eblake@redhat.com>
* nbd: Refactor counting of metadata contextsEric Blake2020-10-301-11/+15
| | | | | | | | | | Rather than open-code the count of negotiated contexts at several sites, embed it directly into the struct. This will make it easier for upcoming commits to support even more simultaneous contexts. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20201027050556.269064-7-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
* nbd: Simplify qemu bitmap context nameEric Blake2020-10-301-10/+9Star
| | | | | | | | | | | | Each dirty bitmap already knows its name; by reducing the scope of the places where we construct "qemu:dirty-bitmap:NAME" strings, tracking the name is more localized, and there are fewer per-export fields to worry about. This in turn will make it easier for an upcoming patch to export more than one bitmap at once. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20201027050556.269064-6-eblake@redhat.com>
* nbd: Update qapi to support exporting multiple bitmapsEric Blake2020-10-301-6/+13
| | | | | | | | | | | | | | | | | | | Since 'block-export-add' is new to 5.2, we can still tweak the interface; there, allowing 'bitmaps':['str'] is nicer than 'bitmap':'str'. This wires up the qapi and qemu-nbd changes to permit passing multiple bitmaps as distinct metadata contexts that the NBD client may request, but the actual support for more than one will require a further patch to the server. Note that there are no changes made to the existing deprecated 'nbd-server-add' command; this required splitting the QAPI type BlockExportOptionsNbd, which fortunately does not affect QMP introspection. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20201027050556.269064-5-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
* block/export: add iothread and fixed-iothread optionsStefan Hajnoczi2020-10-231-2/+0Star
| | | | | | | | | | | | | | | Make it possible to specify the iothread where the export will run. By default the block node can be moved to other AioContexts later and the export will follow. The fixed-iothread option forces strict behavior that prevents changing AioContext while the export is active. See the QAPI docs for details. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20200929125516.186715-5-stefanha@redhat.com [Fix stray '#' character in block-export.json and add missing "(since: 5.2)" as suggested by Eric Blake. --Stefan] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* block: move block exports to libblockdevStefan Hajnoczi2020-10-231-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Block exports are used by softmmu, qemu-storage-daemon, and qemu-nbd. They are not used by other programs and are not otherwise needed in libblock. Undo the recent move of blockdev-nbd.c from blockdev_ss into block_ss. Since bdrv_close_all() (libblock) calls blk_exp_close_all() (libblockdev) a stub function is required.. Make qemu-nbd.c use signal handling utility functions instead of duplicating the code. This helps because os-posix.c is in libblockdev and it depends on a qemu_system_killed() symbol that qemu-nbd.c lacks. Once we use the signal handling utility functions we also end up providing the necessary symbol. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20200929125516.186715-4-stefanha@redhat.com [Fixed s/ndb/nbd/ typo in commit description as suggested by Eric Blake --Stefan] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* nbd: Simplify meta-context parsingEric Blake2020-10-091-121/+68Star
| | | | | | | | | | | | | | | | | | | | | | | | We had a premature optimization of trying to read as little from the wire as possible while handling NBD_OPT_SET_META_CONTEXT in phases. But in reality, we HAVE to read the entire string from the client before we can get to the next command, and it is easier to just read it all at once than it is to read it in pieces. And once we do that, several functions end up no longer performing I/O, so they can drop length and errp parameters, and just return a bool instead of modifying through a pointer. Our iotests still pass; I also checked that libnbd's testsuite (which covers more corner cases of odd meta context requests) still passes. There are cases where the sequence of trace messages produced differs (for example, when no bitmap is exported, a query for "qemu:" now produces two trace lines instead of one), but trace points are for debug and have no effect on what the client sees. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200930121105.667049-4-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: enhance commit message] Signed-off-by: Eric Blake <eblake@redhat.com>
* nbd/server: Reject embedded NUL in NBD stringsEric Blake2020-10-091-10/+20
| | | | | | | | | | | | | | | The NBD spec is clear that any string sent from the client must not contain embedded NUL characters. If the client passes "a\0", we should reject that option request rather than act on "a". Testing this is not possible with a compliant client, but I was able to use gdb to coerce libnbd into temporarily behaving as such a client. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200930121105.667049-3-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
* nbd: silence maybe-uninitialized warningsChristian Borntraeger2020-10-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | gcc 10 from Fedora 32 gives me: Compiling C object libblock.fa.p/nbd_server.c.o ../nbd/server.c: In function ‘nbd_co_client_start’: ../nbd/server.c:625:14: error: ‘namelen’ may be used uninitialized in this function [-Werror=maybe-uninitialized] 625 | rc = nbd_negotiate_send_info(client, NBD_INFO_NAME, namelen, name, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 626 | errp); | ~~~~~ ../nbd/server.c:564:14: note: ‘namelen’ was declared here 564 | uint32_t namelen; | ^~~~~~~ cc1: all warnings being treated as errors As I cannot see how this can happen, let uns silence the warning. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20200930155859.303148-3-borntraeger@de.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
* nbd: Merge nbd_export_new() and nbd_export_create()Kevin Wolf2020-10-021-15/+39
| | | | | | | | | | | | | | | | | | | | There is no real reason any more why nbd_export_new() and nbd_export_create() should be separate functions. The latter only performs a few checks before it calls the former. What makes the current state stand out is that it's the only function in BlockExportDriver that is not a static function inside nbd/server.c, but a small wrapper in blockdev-nbd.c that then calls back into nbd/server.c for the real functionality. Move all the checks to nbd/server.c and make the resulting function static to improve readability. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-27-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block/export: Move writable to BlockExportOptionsKevin Wolf2020-10-021-5/+0Star
| | | | | | | | | | | | The 'writable' option is a basic option that will probably be applicable to most if not all export types that we will implement. Move it from NBD to the generic BlockExport layer. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-26-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block/export: Create BlockBackend in blk_exp_add()Kevin Wolf2020-10-021-26/+12Star
| | | | | | | | | | | Every export type will need a BlockBackend, so creating it centrally in blk_exp_add() instead of the .create driver callback avoids duplication. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-24-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block/export: Move blk to BlockExportKevin Wolf2020-10-021-21/+22
| | | | | | | | | | | Every block export has a BlockBackend representing the disk that is exported. It should live in BlockExport therefore. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-23-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block/export: Add block-export-delKevin Wolf2020-10-021-14/+0Star
| | | | | | | | | | | Implement a new QMP command block-export-del and make nbd-server-remove a wrapper around it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-21-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block/export: Move strong user reference to block_exportsKevin Wolf2020-10-021-2/+0Star
| | | | | | | | | | | | | | | | | | | | | | The reference owned by the user/monitor that is created when adding the export and dropped when removing it was tied to the 'exports' list in nbd/server.c. Every block export will have a user reference, so move it to the block export level and tie it to the 'block_exports' list in block/export/export.c instead. This is necessary for introducing a QMP command for removing exports. Note that exports are present in block_exports even after the user has requested shutdown. This is different from NBD's exports where exports are immediately removed on a shutdown request, even if they are still in the process of shutting down. In order to avoid that the user still interacts with an export that is shutting down (and possibly removes it a second time), we need to remember if the user actually still owns it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-20-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block/export: Add blk_exp_close_all(_type)Kevin Wolf2020-10-021-29/+5Star
| | | | | | | | | | | | | | | | | This adds a function to shut down all block exports, and another one to shut down the block exports of a single type. The latter is used for now when stopping the NBD server. As soon as we implement support for multiple NBD servers, we'll need a per-server list of exports and it will be replaced by a function using that. As a side effect, the BlockExport layer has a list tracking all existing exports now. closed_exports loses its only user and can go away. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-18-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block/export: Allocate BlockExport in blk_exp_add()Kevin Wolf2020-10-021-17/+13Star
| | | | | | | | | | | | | | | | Instead of letting the driver allocate and return the BlockExport object, allocate it already in blk_exp_add() and pass it. This allows us to initialise the generic part before calling into the driver so that the driver can just use these values instead of having to parse the options a second time. For symmetry, move freeing the BlockExport to blk_exp_unref(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-17-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block/export: Move AioContext from NBDExport to BlockExportKevin Wolf2020-10-021-13/+13
| | | | | | | | Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-15-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block/export: Move refcount from NBDExport to BlockExportKevin Wolf2020-10-021-39/+33Star
| | | | | | | | | | | | Having a refcount makes sense for all types of block exports. It is also a prerequisite for keeping a list of all exports at the BlockExport level. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-14-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* nbd/server: Simplify export shutdownKevin Wolf2020-10-021-13/+4Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Closing export is somewhat convoluted because nbd_export_close() and nbd_export_put() call each other and the ways they actually end up being nested is not necessarily obvious. However, it is not really necessary to call nbd_export_close() from nbd_export_put() when putting the last reference because it only does three things: 1. Close all clients. We're going to refcount 0 and all clients hold a reference, so we know there is no active client any more. 2. Close the user reference (represented by exp->name being non-NULL). The same argument applies: If the export were still named, we would still have a reference. 3. Freeing exp->description. This is really cleanup work to be done when the export is finally freed. There is no reason to already clear it while clients are still in the process of shutting down. So after moving the cleanup of exp->description, the code can be simplified so that only nbd_export_close() calls nbd_export_put(), but never the other way around. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200924152717.287415-13-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* nbd: Remove NBDExport.close callbackKevin Wolf2020-10-021-8/+1Star
| | | | | | | | | | | | | | | | | The export close callback is unused by the built-in NBD server. qemu-nbd uses it only during shutdown to wait for the unrefed export to actually go away. It can just use nbd_export_close_all() instead and do without the callback. This removes the close callback from nbd_export_new() and makes both callers of it more similar. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200924152717.287415-11-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block/export: Remove magic from block-export-addKevin Wolf2020-10-021-7/+13
| | | | | | | | | | | | | | | | | | | | | | | | | nbd-server-add tries to be convenient and adds two questionable features that we don't want to share in block-export-add, even for NBD exports: 1. When requesting a writable export of a read-only device, the export is silently downgraded to read-only. This should be an error in the context of block-export-add. 2. When using a BlockBackend name, unplugging the device from the guest will automatically stop the NBD server, too. This may sometimes be what you want, but it could also be very surprising. Let's keep things explicit with block-export-add. If the user wants to stop the export, they should tell us so. Move these things into the nbd-server-add QMP command handler so that they apply only there. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-8-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qemu-nbd: Use raw block driver for --offsetKevin Wolf2020-10-021-17/+16Star
| | | | | | | | | | | | | | | | | | | Instead of implementing qemu-nbd --offset in the NBD code, just put a raw block node with the requested offset on top of the user image and rely on that doing the job. This does not only simplify the nbd_export_new() interface and bring it closer to the set of options that the nbd-server-add QMP command offers, but in fact it also eliminates a potential source for bugs in the NBD code which previously had to add the offset manually in all relevant places. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200924152717.287415-7-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block/export: Add BlockExport infrastructure and block-export-addKevin Wolf2020-10-021-1/+14
| | | | | | | | | | | | | | | | | | We want to have a common set of commands for all types of block exports. Currently, this is only NBD, but we're going to add more types. This patch adds the basic BlockExport and BlockExportDriver structs and a QMP command block-export-add that creates a new export based on the given BlockExportOptions. qmp_nbd_server_add() becomes a wrapper around qmp_block_export_add(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-5-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* nbd: Remove unused nbd_export_get_blockdev()Kevin Wolf2020-10-021-5/+0Star
| | | | | | | | | Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200924152717.287415-2-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* nbd: Use CAF when looking for dirty bitmapMax Reitz2020-09-071-3/+3
| | | | | | | | | When looking for a dirty bitmap to share, we should handle filters by just including them in the search (so they do not break backing chains). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com>
* meson: convert blockMarc-André Lureau2020-08-212-1/+5
| | | | | Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* trace: switch position of headers to what Meson requiresPaolo Bonzini2020-08-211-0/+1
| | | | | | | | | | | | | | | | | Meson doesn't enjoy the same flexibility we have with Make in choosing the include path. In particular the tracing headers are using $(build_root)/$(<D). In order to keep the include directives unchanged, the simplest solution is to generate headers with patterns like "trace/trace-audio.h" and place forwarding headers in the source tree such that for example "audio/trace.h" includes "trace/trace-audio.h". This patch is too ugly to be applied to the Makefiles now. It's only a way to separate the changes to the tracing header files from the Meson rewrite of the tracing logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* nbd: Fix large trim/zero requestsEric Blake2020-07-281-5/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Although qemu as NBD client limits requests to <2G, the NBD protocol allows clients to send requests almost all the way up to 4G. But because our block layer is not yet 64-bit clean, we accidentally wrap such requests into a negative size, and fail with EIO instead of performing the intended operation. The bug is visible in modern systems with something as simple as: $ qemu-img create -f qcow2 /tmp/image.img 5G $ sudo qemu-nbd --connect=/dev/nbd0 /tmp/image.img $ sudo blkdiscard /dev/nbd0 or with user-space only: $ truncate --size=3G file $ qemu-nbd -f raw file $ nbdsh -u nbd://localhost:10809 -c 'h.trim(3*1024*1024*1024,0)' Although both blk_co_pdiscard and blk_pwrite_zeroes currently return 0 on success, this is also a good time to fix our code to a more robust paradigm that treats all non-negative values as success. Alas, our iotests do not currently make it easy to add external dependencies on blkdiscard or nbdsh, so we have to rely on manual testing for now. This patch can be reverted when we later improve the overall block layer to be 64-bit clean, but for now, a minimal fix was deemed less risky prior to release. CC: qemu-stable@nongnu.org Fixes: 1f4d6d18ed Fixes: 1c6c4bb7f0 Fixes: https://github.com/systemd/systemd/issues/16242 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200722212231.535072-1-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: rework success tests to use >=0]
* nbd: make nbd_export_close_all() synchronousVladimir Sementsov-Ogievskiy2020-07-171-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Consider nbd_export_close_all(). The call-stack looks like this: nbd_export_close_all() -> nbd_export_close -> call client_close() for each client. client_close() doesn't guarantee that client is closed: nbd_trip() keeps reference to it. So, nbd_export_close_all() just reduce reference counter on export and removes it from the list, but doesn't guarantee that nbd_trip() finished neither export actually removed. Let's wait for all exports actually removed. Without this fix, the following crash is possible: - export bitmap through internal Qemu NBD server - connect a client - shutdown Qemu On shutdown nbd_export_close_all is called, but it actually don't wait for nbd_trip() to finish and to release its references. So, export is not release, and exported bitmap remains busy, and on try to remove the bitmap (which is part of bdrv_close()) the assertion fails: bdrv_release_dirty_bitmap_locked: Assertion `!bdrv_dirty_bitmap_busy(bitmap)' failed Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200714162234.13113-2-vsementsov@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* nbd: Use ERRP_GUARD()Vladimir Sementsov-Ogievskiy2020-07-102-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). Fix several such cases, e.g. in nbd_read(). This commit is generated by command sed -n '/^Network Block Device (NBD)$/,/^$/{s/^F: //p}' \ MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-8-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
* nbd/server: Avoid long error message assertions CVE-2020-10761Eric Blake2020-06-101-3/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ever since commit 36683283 (v2.8), the server code asserts that error strings sent to the client are well-formed per the protocol by not exceeding the maximum string length of 4096. At the time the server first started sending error messages, the assertion could not be triggered, because messages were completely under our control. However, over the years, we have added latent scenarios where a client could trigger the server to attempt an error message that would include the client's information if it passed other checks first: - requesting NBD_OPT_INFO/GO on an export name that is not present (commit 0cfae925 in v2.12 echoes the name) - requesting NBD_OPT_LIST/SET_META_CONTEXT on an export name that is not present (commit e7b1948d in v2.12 echoes the name) At the time, those were still safe because we flagged names larger than 256 bytes with a different message; but that changed in commit 93676c88 (v4.2) when we raised the name limit to 4096 to match the NBD string limit. (That commit also failed to change the magic number 4096 in nbd_negotiate_send_rep_err to the just-introduced named constant.) So with that commit, long client names appended to server text can now trigger the assertion, and thus be used as a denial of service attack against a server. As a mitigating factor, if the server requires TLS, the client cannot trigger the problematic paths unless it first supplies TLS credentials, and such trusted clients are less likely to try to intentionally crash the server. We may later want to further sanitize the user-supplied strings we place into our error messages, such as scrubbing out control characters, but that is less important to the CVE fix, so it can be a later patch to the new nbd_sanitize_name. Consideration was given to changing the assertion in nbd_negotiate_send_rep_verr to instead merely log a server error and truncate the message, to avoid leaving a latent path that could trigger a future CVE DoS on any new error message. However, this merely complicates the code for something that is already (correctly) flagging coding errors, and now that we are aware of the long message pitfall, we are less likely to introduce such errors in the future, which would make such error handling dead code. Reported-by: Xueqiang Wei <xuwei@redhat.com> CC: qemu-stable@nongnu.org Fixes: https://bugzilla.redhat.com/1843684 CVE-2020-10761 Fixes: 93676c88d7 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200610163741.3745251-2-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
* nbd/server: use bdrv_dirty_bitmap_next_dirty_areaVladimir Sementsov-Ogievskiy2020-03-181-40/+19Star
| | | | | | | | | | | | | Use bdrv_dirty_bitmap_next_dirty_area for bitmap_to_extents. Since bdrv_dirty_bitmap_next_dirty_area is very accurate in its interface, we'll never exceed requested region with last chunk. So, we don't need dont_fragment, and bitmap_to_extents() interface becomes clean enough to not require any comment. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20200205112041.6003-10-vsementsov@virtuozzo.com Signed-off-by: John Snow <jsnow@redhat.com>
* nbd/server: introduce NBDExtentArrayVladimir Sementsov-Ogievskiy2020-03-181-92/+118
| | | | | | | | | | Introduce NBDExtentArray class, to handle extents list creation in more controlled way and with fewer OUT parameters in functions. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20200205112041.6003-9-vsementsov@virtuozzo.com Signed-off-by: John Snow <jsnow@redhat.com>
* block/dirty-bitmap: switch _next_dirty_area and _next_zero to int64_tVladimir Sementsov-Ogievskiy2020-03-181-1/+1
| | | | | | | | | | | | | | | | | | | We are going to introduce bdrv_dirty_bitmap_next_dirty so that same variable may be used to store its return value and to be its parameter, so it would int64_t. Similarly, we are going to refactor hbitmap_next_dirty_area to use hbitmap_next_dirty together with hbitmap_next_zero, therefore we want hbitmap_next_zero parameter type to be int64_t too. So, for convenience update all parameters of *_next_zero and *_next_dirty_area to be int64_t. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 20200205112041.6003-6-vsementsov@virtuozzo.com Signed-off-by: John Snow <jsnow@redhat.com>
* nbd: Fix regression with multiple meta contextsEric Blake2020-02-261-2/+10
| | | | | | | | | | | | | | | | | | | | | Detected by a hang in the libnbd testsuite. If a client requests multiple meta contexts (both base:allocation and qemu:dirty-bitmap:x) at the same time, our attempt to silence a false-positive warning about a potential uninitialized variable introduced botched logic: we were short-circuiting the second context, and never sending the NBD_REPLY_FLAG_DONE. Combining two 'if' into one 'if/else' in bdf200a55 was wrong (I'm a bit embarrassed that such a change was my initial suggestion after the v1 patch, then I did not review the v2 patch that actually got committed). Revert that, and instead silence the false positive warning by replacing 'return ret' with 'return 0' (the value it always has at that point in the code, even though it eluded the deduction abilities of the robot that reported the false positive). Fixes: bdf200a5535 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200206173832.130004-1-eblake@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu>
* nbd: fix uninitialized variable warningPan Nengyuan2020-01-081-9/+1Star
| | | | | | | | | | | | | | Fixes: /mnt/sdb/qemu/nbd/server.c: In function 'nbd_handle_request': /mnt/sdb/qemu/nbd/server.c:2313:9: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized] int ret; Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200108025132.46956-1-pannengyuan@huawei.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* nbd: Don't send oversize stringsEric Blake2019-11-182-8/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Qemu as server currently won't accept export names larger than 256 bytes, nor create dirty bitmap names longer than 1023 bytes, so most uses of qemu as client or server have no reason to get anywhere near the NBD spec maximum of a 4k limit per string. However, we weren't actually enforcing things, ignoring when the remote side violates the protocol on input, and also having several code paths where we send oversize strings on output (for example, qemu-nbd --description could easily send more than 4k). Tighten things up as follows: client: - Perform bounds check on export name and dirty bitmap request prior to handing it to server - Validate that copied server replies are not too long (ignoring NBD_INFO_* replies that are not copied is not too bad) server: - Perform bounds check on export name and description prior to advertising it to client - Reject client name or metadata query that is too long - Adjust things to allow full 4k name limit rather than previous 256 byte limit Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20191114024635.11363-4-eblake@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
* nbd/server: Prefer heap over stack for parsing client namesEric Blake2019-11-181-10/+15
| | | | | | | | | | | | | | | | As long as we limit NBD names to 256 bytes (the bare minimum permitted by the standard), stack-allocation works for parsing a name received from the client. But as mentioned in a comment, we eventually want to permit up to the 4k maximum of the NBD standard, which is too large for stack allocation; so switch everything in the server to use heap allocation. For now, there is no change in actually supported name length. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20191114024635.11363-2-eblake@redhat.com> [eblake: fix uninit variable compile failure] Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
* nbd: Grab aio context lock in more placesEric Blake2019-09-241-4/+18
| | | | | | | | | | | | | | | | | | | | | | | | | When iothreads are in use, the failure to grab the aio context results in an assertion failure when trying to unlock things during blk_unref, when trying to unlock a mutex that was not locked. In short, all calls to nbd_export_put need to done while within the correct aio context. But since nbd_export_put can recursively reach itself via nbd_export_close, and recursively grabbing the context would deadlock, we can't do the context grab directly in those functions, but must do so in their callers. Hoist the use of the correct aio_context from nbd_export_new() to its caller qmp_nbd_server_add(). Then tweak qmp_nbd_server_remove(), nbd_eject_notifier(), and nbd_esport_close_all() to grab the right context, so that all callers during qemu now own the context before nbd_export_put() can call blk_unref(). Remaining uses in qemu-nbd don't matter (since that use case does not support iothreads). Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190917023917.32226-1-eblake@redhat.com> Reviewed-by: Sergio Lopez <slp@redhat.com>
* nbd/server: attach client channel to the export's AioContextSergio Lopez2019-09-241-0/+5
| | | | | | | | | | | | | | | | | | | | | | On creation, the export's AioContext is set to the same one as the BlockBackend, while the AioContext in the client QIOChannel is left untouched. As a result, when using data-plane, nbd_client_receive_next_request() schedules coroutines in the IOThread AioContext, while the client's QIOChannel is serviced from the main_loop, potentially triggering the assertion at qio_channel_restart_[read|write]. To fix this, as soon we have the export corresponding to the client, we call qio_channel_attach_aio_context() to attach the QIOChannel context to the export's AioContext. This matches with the logic at blk_aio_attached(). RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1748253 Signed-off-by: Sergio Lopez <slp@redhat.com> Message-Id: <20190912110032.26395-1-slp@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
* nbd/client: Add hint when TLS is missingEric Blake2019-09-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I received an off-list report of failure to connect to an NBD server expecting an x509 certificate, when the client was attempting something similar to this command line: $ ./x86_64-softmmu/qemu-system-x86_64 -name 'blah' -machine q35 -nodefaults \ -object tls-creds-x509,id=tls0,endpoint=client,dir=$path_to_certs \ -device virtio-scsi-pci,id=virtio_scsi_pci0,bus=pcie.0,addr=0x6 \ -drive id=drive_image1,if=none,snapshot=off,aio=threads,cache=none,format=raw,file=nbd:localhost:9000,werror=stop,rerror=stop,tls-creds=tls0 \ -device scsi-hd,id=image1,drive=drive_image1,bootindex=0 qemu-system-x86_64: -drive id=drive_image1,if=none,snapshot=off,aio=threads,cache=none,format=raw,file=nbd:localhost:9000,werror=stop,rerror=stop,tls-creds=tls0: TLS negotiation required before option 7 (go) server reported: Option 0x7 not permitted before TLS The problem? As specified, -drive is trying to pass tls-creds to the raw format driver instead of the nbd protocol driver, but before we get to the point where we can detect that raw doesn't know what to do with tls-creds, the nbd driver has already failed because the server complained. The fix to the broken command line? Pass '...,file.tls-creds=tls0' to ensure the tls-creds option is handed to nbd, not raw. But since the error message was rather cryptic, I'm trying to improve the error message. With this patch, the error message adds a line: qemu-system-x86_64: -drive id=drive_image1,if=none,snapshot=off,aio=threads,cache=none,format=raw,file=nbd:localhost:9000,werror=stop,rerror=stop,tls-creds=tls0: TLS negotiation required before option 7 (go) Did you forget a valid tls-creds? server reported: Option 0x7 not permitted before TLS And with luck, someone grepping for that error message will find this commit message and figure out their command line mistake. Sadly, the only mention of file.tls-creds in our docs relates to an --image-opts use of PSK encryption with qemu-img as the client, rather than x509 certificate encryption with qemu-kvm as the client. CC: Tingting Mao <timao@redhat.com> CC: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190907172055.26870-1-eblake@redhat.com> [eblake: squash in iotest 233 fix] Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
* trace: Remove trailing newline in eventsPhilippe Mathieu-Daudé2019-09-181-2/+2
| | | | | | | | | | | | | | | | | | | | While the tracing framework does not forbid trailing newline in events format string, using them lead to confuse output. It is the responsibility of the backend to properly end an event line. Some of our formats have trailing newlines, remove them. [Fixed typo in commit description reported by Eric Blake <eblake@redhat.com> --Stefan] Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190916095121.29506-2-philmd@redhat.com Message-Id: <20190916095121.29506-2-philmd@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-12-18 13:23:47 +0100