summaryrefslogtreecommitdiffstats
path: root/net/socket.c
Commit message (Collapse)AuthorAgeFilesLines
* net: use Netdev instead of NetClientOptions in client initKővágó, Zoltán2016-07-191-3/+3
| | | | | | | | | | | | | | | | | | | | | This way we no longer need NetClientOptions and can convert Netdev into a flat union. Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <93ffdfed7054529635e6acb935150d95dc173a12.1441627176.git.DirtY.iCE.hu@gmail.com> [rework net_client_init1() to pass Netdev by copying from NetdevLegacy, rather than merging the two types - which means that we still need NetClientOptions after all. Rebase to qapi changes. The bulk of the patch is mechanical, replacing 'opts' by 'netdev->opts', while net_client_init1() takes care of converting between legacy and modern types.] Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-2-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
* Change net/socket.c to use socket_*() functionsAshijeet Acharya2016-06-281-28/+27Star
| | | | | | | | | | | | | | Use socket_*() functions from include/qemu/sockets.h instead of listen()/bind()/connect()/parse_host_port(). socket_*() fucntions are QAPI based and this patch performs this api conversion since everything will be using QAPI based sockets in the future. Also add a helper function socket_address_to_string() in util/qemu-sockets.c which returns the string representation of socket address. Thetask was listed on http://wiki.qemu.org/BiteSizedTasks page. Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
* net/net: Add SocketReadState for reuse codesZhang Chen2016-06-011-55/+22Star
| | | | | | | | | | | | | | | | | | | | | | | | | This function is from net/socket.c, move it to net.c and net.h. Add SocketReadState to make others reuse net_fill_rstate(). suggestion from jason. v4: - move 'rs->finalize = finalize' to rs_init() v3: - remove SocketReadState init callback - put finalize callback to net_fill_rstate() v2: - rename ReadState to SocketReadState - add SocketReadState init and finalize callback v1: - init patch Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
* include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster2016-03-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qapi: Don't special-case simple union wrappersEric Blake2016-03-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
* osdep: remove use of socket_error() from all codeDaniel P. Berrange2016-03-101-11/+8Star
| | | | | | | | | | Now that QEMU wraps the Win32 sockets methods to automatically set errno upon failure, there is no reason for callers to use the socket_error() method. They can rely on accessing errno even on Win32. Remove all use of socket_error() from general code, leaving it as a static method in oslib-win32.c only. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
* net: Clean up includesPeter Maydell2016-02-041-1/+1
| | | | | | | | | | Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1454089805-5470-11-git-send-email-peter.maydell@linaro.org
* net: Convert to new qapi union layoutEric Blake2015-11-021-2/+2
| | | | | | | | | | | | | | | | | We have two issues with our qapi union layout: 1) Even though the QMP wire format spells the tag 'type', the C code spells it 'kind', requiring some hacks in the generator. 2) The C struct uses an anonymous union, which places all tag values in the same namespace as all non-variant members. This leads to spurious collisions if a tag value matches a non-variant member's name. Make the conversion to the new layout for net-related code. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-18-git-send-email-eblake@redhat.com> [Commit message tweaked slightly] Signed-off-by: Markus Armbruster <armbru@redhat.com>
* socket: pass correct size in net_socket_send()Jason Wang2015-07-201-1/+1
| | | | | | | | | | | | | We should pass the size of packet instead of the remaining to qemu_send_packet_async(). Fixes: 6e99c631f116221d169ea53953d91b8aa74d297a ("net/socket: Drop net_socket_can_send") Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 1436259656-24263-1-git-send-email-jasowang@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* Change qemu_set_fd_handler2(..., NULL, ...) to qemu_set_fd_handlerFam Zheng2015-06-121-4/+4
| | | | | | | | | | | | | | | Done with following Coccinelle semantic patch, plus manual cosmetic changes in net/*.c. @@ expression E1, E2, E3, E4; @@ - qemu_set_fd_handler2(E1, NULL, E2, E3, E4); + qemu_set_fd_handler(E1, E2, E3, E4); Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1433400324-7358-8-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* net/socket: Drop net_socket_can_sendFam Zheng2015-06-121-12/+19
| | | | | | | | | | | | | | | | This callback is called by main loop before polling s->fd, if it returns false, the fd will not be polled in this iteration. This is redundant with checks inside read callback. After this patch, the data will be sent to peer when it arrives. If the device can't receive, it will be queued to incoming_queue, and when the device status changes, this queue will be flushed. If the peer is not ready, disable the read poll until send completes. Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1433400324-7358-6-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* net: Permit incremental conversion of init functions to ErrorMarkus Armbruster2015-05-271-1/+2
| | | | | | | | | | | | | | | | | | | | | | | Error reporting for netdev_add is broken: the net_client_init_fun[] report the actual errors with (at best) error_report(), and their caller net_client_init1() makes up a generic error on top. For command line and HMP, this produces an mildly ugly error cascade. In QMP, the actual errors go to stderr, and the generic error becomes the command's error reply. To fix this, we need to convert the net_client_init_fun[] to Error. To permit fixing them one by one, add an Error ** parameter to the net_client_init_fun[]. If the call fails without returning an Error, make up the same generic Error as before. But if it returns one, use that instead. Since none of them does so far, no functional change. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-3-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* monitor: Clean up around monitor_handle_fd_param()Markus Armbruster2015-02-181-1/+3
| | | | | | | | | | | | | | | | | monitor_handle_fd_param() is a wrapper around monitor_handle_fd_param2() that feeds errors to qerror_report_err() instead of returning them. qerror_report_err() is inappropriate in many contexts. monitor_handle_fd_param() looks simpler than monitor_handle_fd_param2(), which tempts use. Remove the temptation: drop the wrapper and open-code the (trivial) error handling instead. Replace the open-coded qerror_report_err() by error_report_err() in places that already use error_report(). Turns out that's everywhere. While there, rename monitor_handle_fd_param2() to monitor_fd_param(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
* net/socket: fix Uninitialized scalar variableGonglei2014-11-211-5/+6
| | | | | | | | | | | | | If is_connected parameter is false, the saddr variable will no initialize. Coverity report: uninit_use: Using uninitialized value saddr.sin_port. We don't need add saddr information to nc->info_str when is_connected is false. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* net: The third parameter of getsockname should be initializedzhanghailiang2014-11-181-1/+1
| | | | | | Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* net: call socket_set_fast_reuse instead of setting SO_REUSEADDRSebastian Ottlik2013-10-021-9/+10
| | | | | | | | | | | | | | SO_REUSEADDR should be avoided on Windows but is desired on other operating systems. So instead of setting it we call socket_set_fast_reuse that will result in the appropriate behaviour on all operating systems. An exception to this rule are multicast sockets where it is sensible to have multiple sockets listen on the same ip and port and we should set SO_REUSEADDR on windows. Signed-off-by: Sebastian Ottlik <ottlik@fzi.de> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Weil <sw@weilnetz.de>
* aio / timers: Untangle include filesAlex Bligh2013-08-221-0/+1
| | | | | | | | | | include/qemu/timer.h has no need to include main-loop.h and doing so causes an issue for the next patch. Unfortunately various files assume including timers.h will pull in main-loop.h. Untangle this mess. Signed-off-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* net: ensure "socket" backend uses non-blocking fdsStefan Hajnoczi2013-04-021-1/+6
| | | | | | | | | | | | | | | | | | There are several code paths in net_init_socket() depending on how the socket is created: file descriptor passing, UDP multicast, TCP, or UDP. Some of these support both listen and connect. Not all code paths set the socket to non-blocking. This patch addresses the file descriptor passing and UDP cases which were missing socket_set_nonblock(fd) calls. I considered moving socket_set_nonblock(fd) to a central location but it turns out the code paths are different enough to require non-blocking at different places. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
* oslib-posix: rename socket_set_nonblock() to qemu_set_nonblock()Stefan Hajnoczi2013-04-021-3/+3
| | | | | | | | | The fcntl(fd, F_SETFL, O_NONBLOCK) flag is not specific to sockets. Rename to qemu_set_nonblock() just like qemu_set_cloexec(). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
* net: increase buffer size to accommodate Jumbo frame pktsScott Feldman2013-03-251-2/+2
| | | | | | | | | | | | | | | | | | | | Socket buffer sizes were hard-coded to 4K for VDE and socket netdevs. Bump this up to 68K (ala tap netdev) to handle maximum GSO packet size (64k) plus plenty of room for the ethernet and virtio_net headers. Originally, ran into this limitation when using -netdev UDP sockets to connect VM-to-VM, where VM interface is configure with MTU=9000. (Using virtio_net NIC model). Test is simple: ping -M do -s 8500 <target>. This test will attempt to ping with unfragmented packet of given size. Without patch, size is limited to < 4K (minus protocol hdrs). With patch, ping test works with pkt size up to 9000 (again, minus protocol hdrs). v2: per Stefan, increase buf size to (4096+65536) as done in tap and apply to vde and socket netdevs. v1: increase buf size to 12K just for -netdev UDP sockets Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* net: use socket_set_nodelay() for -netdev socketStefan Hajnoczi2013-03-251-0/+3
| | | | | | | | | | | | | | | Reduce -netdev socket latency by disabling the Nagle algorithm on SOCK_STREAM sockets in net/socket.c. Since we are tunelling Ethernet over TCP we shouldn't artificially delay outgoing packets, let the guest decide packet scheduling. I already get sub-millisecond -netdev socket ping times on localhost, so there was no measurable difference in my testing. This won't hurt though and may improve remote socket performance. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
* MinGW: Replace setsockopt by qemu_setsocketoptStefan Weil2013-03-221-11/+10Star
| | | | | | | | | Instead of adding missing type casts which are needed by MinGW for the 4th argument, the patch uses qemu_setsockopt which was invented for this purpose. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* misc: move include files to include/qemu/Paolo Bonzini2012-12-191-4/+4
| | | | Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* monitor: move include files to include/monitor/Paolo Bonzini2012-12-191-1/+1
| | | | Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* net: reorganize headersPaolo Bonzini2012-12-191-1/+1
| | | | | | | | | Move public headers to include/net, and leave private headers in net/. Put the virtio headers in include/net/tap.h, removing the multiple copies that existed. Leave include/net/tap.h as the interface for NICs, and net/tap_int.h as the interface for OS-specific parts of the tap backend. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* janitor: do not include qemu-char everywherePaolo Bonzini2012-12-191-1/+0Star
| | | | | | | Touching char/char.h basically causes the whole of QEMU to be rebuilt. Avoid this, it is usually unnecessary. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* net: use "socket" model name for UDP socketsLei Li2012-11-011-1/+1
| | | | | | | | | | | | Fix the problem that can not delete the udp socket. It's caused by passing "udp" model to net_socket_udp_init, but we do not have "udp" model in our model list. Pass the right model "socket" to init function. https://bugs.launchpad.net/qemu/+bug/1073585?comments=all Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* net: consolidate NetClientState header files into onePaolo Bonzini2012-10-081-2/+1Star
| | | | | | | | | | | | | | | This patch doesn't seem much useful alone, I must admit. However, it makes sense as part of the upcoming directory reorganization, where I want to have include/net/tap.h as the net<->hw interface for tap. Then having both net/tap.h and include/net/tap.h does not work. "Fixed" by moving all the init functions to a single header file net/clients.h. The patch also adopts a uniform style for including net/*.h files from net/*.c, without the net/ path. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
* net/socket: Fix compiler warning (regression for MinGW)Stefan Weil2012-09-231-3/+3
| | | | | | | | | | | | | | | | Commit 213fd5087e2e4e2da10ad266df0ba950cf7618bf removed a type cast which is needed for MinGW: net/socket.c:136: warning: pointer targets in passing argument 2 of ‘sendto’ differ in signedness /usr/lib/gcc/amd64-mingw32msvc/4.4.4/../../../../amd64-mingw32msvc/include/winsock2.h:1313: note: expected ‘const char *’ but argument is of type ‘const uint8_t *’ Add a 'qemu_sendto' macro which provides that type cast where needed and use the new macro instead of 'sendto'. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
* net: EAGAIN handling for net/socket.c TCPStefan Hajnoczi2012-09-141-5/+31
| | | | | | | | | | | | | | | | | | | | Replace spinning send_all() with a proper non-blocking send. When the socket write buffer limit is reached, we should stop trying to send and wait for the socket to become writable again. Non-blocking TCP sockets can return in two different ways when the write buffer limit is reached: 1. ret = -1 and errno = EAGAIN/EWOULDBLOCK. No data has been written. 2. ret < total_size. Short write, only part of the message was transmitted. Handle both cases and keep track of how many bytes have been written in s->send_index. (This includes the 'length' header before the actual payload buffer.) Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* net: EAGAIN handling for net/socket.c UDPStefan Hajnoczi2012-09-141-2/+12
| | | | | | | Implement asynchronous send for UDP (or other SOCK_DGRAM) sockets. If send fails with EAGAIN we wait for the socket to become writable again. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* net: asynchronous send/receive infrastructure for net/socket.cStefan Hajnoczi2012-09-141-6/+52
| | | | | | | | | | | | | The net/socket.c net client is not truly asynchronous. This patch borrows the qemu_set_fd_handler2() code from net/tap.c as the basis for proper asynchronous send/receive. Only read packets from the socket when the peer is able to receive. This avoids needless queuing. Later patches implement asynchronous send. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* monitor: Rename+move net_handle_fd_param -> monitor_handle_fd_paramNicholas Bellinger2012-09-071-1/+1
| | | | | | | | | | | | | | | | | This patch renames+moves the net_handle_fd_param() caller used to obtain a file descriptor from either qemu_parse_fd() (the normal case) or from monitor_get_fd() (migration case) into a generically prefixed monitor_handle_fd_param() to be used by vhost-scsi code. Also update net/[socket,tap].c consumers to use the new prefix. Reported-by: Michael S. Tsirkin <mst@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* net: add the support for -netdev socket, listenZhi Yong Wu2012-08-011-29/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The -net socket,listen option does not work with the newer -netdev syntax: http://lists.gnu.org/archive/html/qemu-devel/2011-11/msg01508.html This patch makes it work now. For the case where one vlan has multiple listenning sockets, the patch will also provide the support. Supported syntax: 1.) -net socket,listen=127.0.0.1:1234,vlan=0 2.) -net socket,listen=127.0.0.1:1234,vlan=0 -net socket,listen=127.0.0.1:1235,vlan=0 3.) -netdev socket,listen=127.0.0.1:1234,id=socket0 Drop the NetSocketListenState struct and add a listen_fd field to NetSocketState. When a -netdev socket,listen= instance is created there will be a NetSocketState with fd=-1 and a valid listen_fd. The net_socket_accept() handler waits for listen_fd to become readable and then accepts the connection. When this state transition happens, we no longer monitor listen_fd for incoming connections...until the client disconnects again. Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
* net: fix the coding styleZhi Yong Wu2012-08-011-1/+3
| | | | | | Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
* net: Rename VLANClientState to NetClientStateStefan Hajnoczi2012-08-011-15/+15
| | | | | | | | | | | | | | | The vlan feature is no longer part of net core. Rename VLANClientState to NetClientState because net clients are not explicitly associated with a vlan at all, instead they have a peer net client to which they are connected. This patch is a mechanical search-and-replace except for a few whitespace fixups where changing VLANClientState to NetClientState misaligned whitespace. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
* net: Drop vlan argument to qemu_new_net_client()Stefan Hajnoczi2012-08-011-2/+2
| | | | | | | | | | Since hubs are now used to implement the 'vlan' feature and the vlan argument is always NULL, remove the argument entirely and update all net clients that use qemu_new_net_client(). Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
* net: Use hubs for the vlan featureStefan Hajnoczi2012-08-011-24/+24
| | | | | | | | | | Stop using the special-case vlan code in net.c. Instead use the hub net client to implement the vlan feature. The next patch will remove vlan code from net.c completely. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
* remove unused QemuOpts parameter from net init functionsLaszlo Ersek2012-07-231-2/+2
| | | | | | | | | | | v1->v2: - unchanged v2->v3: - keep "qemu-option.h" included in "net/slirp.h" Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* convert net_init_socket() to NetClientOptionsLaszlo Ersek2012-07-231-76/+43Star
| | | | | | | | | | | | | | | | | | | | | | I "reverse engineered" the following permissions between the -socket sub-options: fd listen connect mcast udp | localaddr fd x . . . . | . listen . x . . . | . connect . . x . . | . mcast . . . x . | x udp . . . . x | x -------------------------------------------+ localaddr . . . x x x I transformed the code accordingly. The real fix would be to embed "fd", "listen", "connect", "mcast" and "udp" in a separate union. However OptsVisitor's enum parser only supports the type=XXX QemuOpt instance as union discriminator. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* convert net_client_init() to OptsVisitorLaszlo Ersek2012-07-231-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* hw, net: "net_client_type" -> "NetClientOptionsKind" (qapi-generated)Laszlo Ersek2012-07-231-2/+2
| | | | | | | NET_CLIENT_TYPE_ -> NET_CLIENT_OPTIONS_KIND_ Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* net: purge the monitor object from all init functionsLuiz Capitulino2012-06-041-5/+3Star
| | | | | | | | The only backend that really uses it is the socket one, which calls monitor_get_fd(). But it can use 'cur_mon' instead. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-By: Laszlo Ersek <lersek@redhat.com>
* net: remove extra spaces in help messagesBenjamin MARSILI2012-02-101-4/+4
| | | | | Signed-off-by: Benjamin MARSILI <mlspirat42@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* Support for UDP unicast network backendBenjamin2012-01-121-2/+75
| | | | | Signed-off-by: Benjamin MARSILI <mlspirat42@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* net/socket.c: Fix fd leak in net_socket_listen_init() error pathsPeter Maydell2012-01-061-0/+2
| | | | | | | | Fix a leak of a file descriptor due to missing closesocket() calls in error paths in net_socket_listen_init(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* Merge remote-tracking branch 'stefanha/trivial-patches-next' into stagingAnthony Liguori2011-12-141-0/+3
|\
| * net/socket.c : fix memory leakZhi Hui Li2011-12-061-0/+3
| | | | | | | | | | Signed-off-by: Li Zhi Hui <zhihuili@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* | net: take ownership of fd in socket init functionsStefan Hajnoczi2011-12-131-8/+9
| | | | | | | | | | | | | | | | | | | | | | | | Today net/socket.c has no consistent policy for closing the socket file descriptor when initialization fails. This means we leak the file descriptor in some cases or we could also try to close it twice. Make error paths consistent by taking ownership of the file descriptor and closing it on error. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* | net: expand tabs in net/socket.cStefan Hajnoczi2011-12-131-38/+41
|/ | | | | | | | In order to make later patches sane, expand the tab characters and conform to QEMU coding style now. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-18 10:22:23 +0200