summaryrefslogtreecommitdiffstats
path: root/qemu-img.c
Commit message (Collapse)AuthorAgeFilesLines
* blockjob: Remove BlockJob.bsKevin Wolf2016-05-251-1/+1
| | | | | | | | | | There is a single remaining user in qemu-img, and another one in a test case, both of which can be trivially converted to using BlockJob.blk instead. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
* block: Rename blk_write_zeroes()Eric Blake2016-05-251-2/+2
| | | | | | | | | | | | | | | Commit 983a1600 changed the semantics of blk_write_zeroes() to be byte-based rather than sector-based, but did not change the name, which is an open invitation for other code to misuse the function. Renaming to pwrite_zeroes() makes it more in line with other byte-based interfaces, and will help make it easier to track which remaining write_zeroes interfaces still need conversion. Reported-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
* Use &error_fatal when initializing crypto on qemu-{img,io,nbd}Eduardo Habkost2016-05-201-4/+1Star
| | | | | | | | | | | | In addition to making the code simpler, this will replace the long error messages: cannot initialize crypto: Unable to initialize GNUTLS library: [...] cannot initialize crypto: Unable to initialize gcrypt with shorter messages: Unable to initialize GNUTLS library: [...] Unable to initialize gcrypt Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* qemu-img: check block status of backing file when converting.Ren Kimura2016-05-121-2/+13
| | | | | | | | | When converting images, check the block status of its backing file chain to avoid needlessly reading zeros. Signed-off-by: Ren Kimura <rkx1209dev@gmail.com> Message-id: 1461773098-20356-1-git-send-email-rkx1209dev@gmail.com Signed-off-by: Max Reitz <mreitz@redhat.com>
* qemu-img: Switch to byte-based block accessEric Blake2016-05-121-9/+19
| | | | | | | | Sector-based blk_write() should die; switch to byte-based blk_pwrite() instead. Likewise for blk_read(). Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block: Switch blk_*write_zeroes() to byte interfaceEric Blake2016-05-121-1/+2
| | | | | | | | | | Sector-based blk_write() should die; convert the one-off variant blk_write_zeroes() to use an offset/count interface instead. Likewise for blk_co_write_zeroes() and blk_aio_write_zeroes(). Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qom: -object error messages lost location, restore itMarkus Armbruster2016-04-281-28/+11Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | qemu_opts_foreach() runs its callback with the error location set to the option's location. Any errors the callback reports use the option's location automatically. Commit 90998d5 moved the actual error reporting from "inside" qemu_opts_foreach() to after it. Here's a typical hunk: if (qemu_opts_foreach(qemu_find_opts("object"), - object_create, - object_create_initial, NULL)) { + user_creatable_add_opts_foreach, + object_create_initial, &err)) { + error_report_err(err); exit(1); } Before, object_create() reports from within qemu_opts_foreach(), using the option's location. Afterwards, we do it after qemu_opts_foreach(), using whatever location happens to be current there. Commonly a "none" location. This is because Error objects don't have location information. Problematic. Reproducer: $ qemu-system-x86_64 -nodefaults -display none -object secret,id=foo,foo=bar qemu-system-x86_64: Property '.foo' not found Note no location. This commit restores it: qemu-system-x86_64: -object secret,id=foo,foo=bar: Property '.foo' not found Note that the qemu_opts_foreach() bug just fixed could mask the bug here: if the location it leaves dangling hasn't been clobbered, yet, it's the correct one. Reported-by: Eric Blake <eblake@redhat.com> Cc: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1461767349-15329-4-git-send-email-armbru@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [Paragraph on Error added to commit message]
* block: initialize qcrypto API at startupDaniel P. Berrange2016-04-121-0/+6
| | | | | | | | | | | | | | | Any programs which call the qcrypto APIs should ensure that qcrypto_init() has been called before anything else which can use crypto. Essentially this means right at the start of the main method before initializing anything else. This is important because some versions of gnutls/gcrypt require explicit initialization before use. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Alex Bligh <alex@alex.org.uk> Tested-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qemu-img: fix formatting of error messageDaniel P. Berrange2016-04-121-1/+1
| | | | | | | | | | | | | The error_reportf_err() will not automatically append a ': ' before adding its suffix, so we must include that in the message we pass it, otherwise we get a badly formatted message lacking whitespace: qemu-img: Could not open 'driver=nbd,host=127.0.0.1,port=6666,tls-creds=tls0'Failed to connect socket: Connection refused Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qemu-img: Fix preallocation with -S 0 for convertMax Reitz2016-03-301-11/+15
| | | | | | | | | | | | | | | | | | | | | | | | When passing -S 0 to qemu-img convert, the target image is supposed to be fully allocated. Right now, this is not the case if the source image contains areas which bdrv_get_block_status() reports as being zero. This patch changes a zeroed area's status from BLK_ZERO to BLK_DATA before invoking convert_write() if -S 0 has been specified. In addition, the check whether convert_read() actually needs to do anything (basically only if the current area is a BLK_DATA area) is pulled out of that function to the caller. If -S 0 has been specified, zeroed areas need to be written as data to the output, thus they then have to be accounted when calculating the progress made. This patch changes the reference output for iotest 122; contrary to what it assumed, -S 0 really should allocate everything in the output, not just areas that are filled with zeros (as opposed to being zeroed). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block: Remove BDRV_O_CACHE_WBKevin Wolf2016-03-301-1/+1
| | | | | | | | | | | | | | | | | | | The previous patches have successively made blk->enable_write_cache the true source for the information whether a writethrough mode must be implemented. The corresponding BDRV_O_CACHE_WB is only useless baggage we're carrying around, so now's the time to remove it. At the same time, we remove the 'cache.writeback' option parsing on the BDS level as the only effect was setting the BDRV_O_CACHE_WB flag. This change requires test cases that explicitly enabled the option to drop it. Other than that and the change of the error message when writethrough is enabled on the BDS level (from "Can't set writethrough mode" to "doesn't support the option"), there should be no change in behaviour. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
* qemu-img: Call blk_set_enable_write_cache() explicitlyKevin Wolf2016-03-301-32/+44
| | | | | Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
* qemu-img: Expand all BDRV_O_FLAGS usesKevin Wolf2016-03-301-12/+11Star
| | | | | | | | | It always only set the BDRV_O_CACHE_WB flag, which is going to go away. In order to make the next changes more local for better reviewability this patches expands the macro. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
* qemu-img/qemu-io: don't prompt for passwords if not requiredDaniel P. Berrange2016-03-301-1/+2
| | | | | | | | | | | | | | | The qemu-img/qemu-io tools prompt for disk encryption passwords regardless of whether any are actually required. Adding a check on bdrv_key_required() avoids this prompt for disk formats which have been converted to the QCryptoSecret APIs. This is just a temporary hack to ensure the block I/O tests continue to work after each patch, since the last patch will completely delete all the password prompting code. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block: add flag to indicate that no I/O will be performedDaniel P. Berrange2016-03-301-22/+22
| | | | | | | | | | | | | | | | | When opening an image it is useful to know whether the caller intends to perform I/O on the image or not. In the case of encrypted images this will allow the block driver to avoid having to prompt for decryption keys when we merely want to query header metadata about the image. eg qemu-img info This flag is enforced at the top level only, since even if we don't want todo I/O on the 'qcow2' file payload, the underlying 'file' driver will still need todo I/O to read the qcow2 header, for example. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* util: move declarations out of qemu-common.hVeronia Bahaa2016-03-221-1/+1
| | | | | | | | | | Move declarations out of qemu-common.h for functions declared in utils/ files: e.g. include/qemu/path.h for utils/path.c. Move inline functions out of qemu-common.h and into new files (e.g. include/qemu/bcd.h) Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster2016-03-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* blockdev: Split monitor reference from BB creationMax Reitz2016-03-171-29/+21Star
| | | | | | | | | | | | | | | | | | | | | | | | Before this patch, blk_new() automatically assigned a name to the new BlockBackend and considered it referenced by the monitor. This patch removes the implicit monitor_add_blk() call from blk_new() (and consequently the monitor_remove_blk() call from blk_delete(), too) and thus blk_new() (and related functions) no longer take a BB name argument. In fact, there is only a single point where blk_new()/blk_new_open() is called and the new BB is monitor-owned, and that is in blockdev_init(). Besides thus relieving us from having to invent names for all of the BBs we use in qemu-img, this fixes a bug where qemu cannot create a new image if there already is a monitor-owned BB named "image". If a BB and its BDS tree are created in a single operation, as of this patch the BDS tree will be created before the BB is given a name (whereas it was the other way around before). This results in minor change to the output of iotest 087, whose reference output is amended accordingly. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qemu-img: eliminate memory leakPaolo Bonzini2016-03-141-5/+4Star
| | | | | | | | | Not particularly important since qemu-img exits immediately after calling img_rebase, but easily fixed. Coverity says thanks. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qemu-img: allow specifying image as a set of options argsDaniel P. Berrange2016-02-221-38/+167
| | | | | | | | | | | | | | | | | | | Currently qemu-img allows an image filename to be passed on the command line, but unless using the JSON format, it does not have a way to set any options except the format eg qemu-img info https://127.0.0.1/images/centos7.iso This adds a --image-opts arg that indicates that the positional filename should be interpreted as a full option string, not just a filename. qemu-img info --image-opts driver=https,url=https://127.0.0.1/images,sslverify=off This flag is mutually exclusive with the '-f' / '-F' flags. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qemu-img: add support for --object command line argDaniel P. Berrange2016-02-221-8/+252
| | | | | | | | | | | | | | | Allow creation of user creatable object types with qemu-img via a new --object command line arg. This will be used to supply passwords and/or encryption keys to the various block driver backends via the recently added 'secret' object type. # printf letmein > mypasswd.txt # qemu-img info --object secret,id=sec0,file=mypasswd.txt \ ...other info args... Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qemu-img: initialize MapEntry objectJohn Snow2016-02-221-11/+15
| | | | | | | | | | | | | Commit 16b0d555 introduced an issue where we are not initializing has_filename for the 'next' MapEntry object, which leads to interesting errors in both Valgrind and Clang -fsanitize=undefined. Zero the stack object at allocation AND make sure the utility to populate the fields properly marks has_filename as false if applicable. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* nbd: convert block client to use I/O channels for connection setupDaniel P. Berrange2016-02-161-0/+1
| | | | | | | | | | | | | | | | | | | | This converts the NBD block driver client to use the QIOChannelSocket class for initial connection setup. The NbdClientSession struct has two pointers, one to the master QIOChannelSocket providing the raw data channel, and one to a QIOChannel which is the current channel used for I/O. Initially the two point to the same object, but when TLS support is added, they will point to different objects. The qemu-img & qemu-io tools now need to use MODULE_INIT_QOM to ensure the QIOChannel object classes are registered. The qemu-nbd tool already did this. In this initial conversion though, all I/O is still actually done using the raw POSIX sockets APIs. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1455129674-17255-4-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qapi: Swap visit_* arguments for consistent 'name' placementEric Blake2016-02-081-6/+5Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
* qemu-img: Make MapEntry a QAPI structFam Zheng2016-02-021-29/+42
| | | | | | | | | | | | | The "flags" bit mask is expanded to two booleans, "data" and "zero"; "bs" is replaced with "filename" string. Refactor the merge conditions in img_map() into entry_mergeable(). Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1453780743-16806-16-git-send-email-famz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
* qemu-img: In "map", use the returned "file" from bdrv_get_block_statusFam Zheng2016-02-021-1/+1
| | | | | | | | | | | Now all drivers should return a correct "file", we can make use of it, even with the recursion into backing chain above. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1453780743-16806-15-git-send-email-famz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
* block: Add "file" output parameter to block status query functionsFam Zheng2016-02-021-4/+9
| | | | | | | | | | | | | | | | | | The added parameter can be used to return the BDS pointer which the valid offset is referring to. Its value should be ignored unless BDRV_BLOCK_OFFSET_VALID in ret is set. Until block drivers fill in the right value, let's clear it explicitly right before calling .bdrv_get_block_status. The "bs->file" condition in bdrv_co_get_block_status is kept now to keep iotest case 102 passing, and will be fixed once all drivers return the right file pointer. Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1453780743-16806-2-git-send-email-famz@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
* block: Clean up includesPeter Maydell2016-01-201-1/+1
| | | | | | | | | | | Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qemu-img: Speed up comparing empty/zero imagesFam Zheng2016-01-201-15/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Two empty raw files are always compared by actually reading data even if there is no data, because BDRV_BLOCK_ZERO is considered "allocated" in bdrv_is_allocated_above(). That is inefficient. Use bdrv_get_block_status_above() for more information, and skip the consecutive zero sectors. This brings a huge speed up in comparing sparse/empty raw images: $ qemu-img create a 1G $ time ~/build/master/bin/qemu-img compare a a Images are identical. real 0m6.583s user 0m0.191s sys 0m6.367s $ time qemu-img compare a a Images are identical. real 0m0.033s user 0m0.003s sys 0m0.031s Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* error: Use error_reportf_err() where it makes obvious senseMarkus Armbruster2016-01-131-20/+13Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Done with this Coccinelle semantic patch @@ expression FMT, E, S; expression list ARGS; @@ - error_report(FMT, ARGS, error_get_pretty(E)); + error_reportf_err(E, FMT/*@@@*/, ARGS); ( - error_free(E); | exit(S); | abort(); ) followed by a replace of '%s"/*@@@*/' by '"' and some line rewrapping, because I can't figure out how to make Coccinelle transform strings. We now use the error whole instead of just its message obtained with error_get_pretty(). This avoids suppressing its hint (see commit 50b7b00), but I can't see how the errors touched in this commit could come with hints. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1450452927-8346-12-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
* error: Don't decorate original error message when adding to itMarkus Armbruster2016-01-131-1/+1
| | | | | | | | | | Prepend the additional information, colon, space to the original message without enclosing it in parenthesis or quotes, like we do elsewhere. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1450452927-8346-11-git-send-email-armbru@redhat.com>
* qemu-img: abort when full_backing_filename not presentJohn Snow2015-12-181-1/+4
| | | | | | | | | | | ...But only if we have the backing_filename. It means something Scary happened and we can't really be quite exactly sure if we can trust the backing_filename. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1450122916-4706-5-git-send-email-jsnow@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
* block: Add opaque value to the amend CBMax Reitz2015-12-181-2/+3
| | | | | | | | | | | Add an opaque value which is to be passed to the bdrv_amend_options() status callback. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* blockjob: Introduce reference count and fix reference to job->bsFam Zheng2015-11-121-3/+0Star
| | | | | | | | | | | | | | | | Add reference count to block job, meanwhile move the ownership of the reference to job->bs from the caller (which is released in two completion callbacks) to the block job itself. It is necessary for block_job_complete_sync to work, because block job shouldn't live longer than its bs, as asserted in bdrv_delete. Now block_job_complete_sync can be simplified. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1446765200-3054-6-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qemu-img: add check for zero-length job lenJohn Snow2015-11-111-1/+2
| | | | | | | | | | | | | The mirror job doesn't update its total length until it has already started running, so we should translate a zero-length job-len as meaning 0%. Otherwise, we may get divide-by-zero faults. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block: Add and use bdrv_replace_in_backing_chain()Kevin Wolf2015-10-161-8/+8
| | | | | | | | | | | | | | | | | This cleans up the mess we left behind in the mirror code after the previous patch. Instead of using bdrv_swap(), just change pointers. The interface change of the mirror job that callers must consider is that after job completion, their local BDS pointers still point to the same node now. qemu-img must change its code accordingly (which makes it easier to understand); the other callers stays unchanged because after completion they don't do anything with the BDS, but just with the job, and the job is still owned by the source BDS. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
* block: Convert bs->backing_hd to BdrvChildKevin Wolf2015-10-161-2/+2
| | | | | | | | | | | | | | | This is the final step in converting all of the BlockDriverState pointers that block drivers use to BdrvChild. After this patch, bs->children contains the full list of child nodes that are referenced by a given BDS, and these children are only referenced through BdrvChild, so that updating the pointer in there is enough for changing edges in the graph. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
* utils: rename strtosz to use qemu prefixMarc-André Lureau2015-09-251-2/+3
| | | | | | | | | | | Not only it makes sense, but it gets rid of checkpatch warning: WARNING: consider using qemu_strtosz in preference to strtosz Also remove get rid of tabs to please checkpatch. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1442419377-9309-1-git-send-email-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qemu-img: Fix crash in amend invocationMax Reitz2015-09-041-1/+2
| | | | | | | | | | | | | | | | | Example: $ ./qemu-img create -f qcow2 /tmp/t.qcow2 64M $ ./qemu-img amend -f qcow2 -o backing_file=/tmp/t.qcow2, -o help \ /tmp/t.qcow2 This should not crash. This actually is tested by iotest 082, but not caught due to the segmentation fault being silent (which is something that needs to be fixed, too). Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: qemu-stable <qemu-stable@nongnu.org> Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* Include qapi/qmp/qerror.h exactly where neededMarkus Armbruster2015-06-221-0/+1
| | | | | | | | | In particular, don't include it into headers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
* qerror: Clean up QERR_ macros to expand into a single stringMarkus Armbruster2015-06-221-1/+1
| | | | | | | | | | | | | | | | | | | | | These macros expand into error class enumeration constant, comma, string. Unclean. Has been that way since commit 13f59ae. The error class is always ERROR_CLASS_GENERIC_ERROR since the previous commit. Clean up as follows: * Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and delete it from the QERR_ macro. No change after preprocessing. * Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into error_setg(...). Again, no change after preprocessing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
* QemuOpts: Wean off qerror_report_err()Markus Armbruster2015-06-221-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | qerror_report_err() is a transitional interface to help with converting existing monitor commands to QMP. It should not be used elsewhere. The only remaining user in qemu-option.c is qemu_opts_parse(). Is it used in QMP context? If not, we can simply replace qerror_report_err() by error_report_err(). The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are clearly not in QMP context. The uses in vl.c aren't either, because the only QMP command handlers there are qmp_query_status() and qmp_query_machines(), and they don't call it. Remaining uses: * drive_def(): Command line -drive and such, HMP drive_add and pci_add * hmp_chardev_add(): HMP chardev-add * monitor_parse_command(): HMP core * tmp_config_parse(): Command line -tpmdev * net_host_device_add(): HMP host_net_add * net_client_parse(): Command line -net and -netdev * qemu_global_option(): Command line -global * vnc_parse_func(): Command line -display, -vnc, default display, HMP change, QMP change. Bummer. * qemu_pci_hot_add_nic(): HMP pci_add * usb_net_init(): Command line -usbdevice, HMP usb_add Propagate errors through qemu_opts_parse(). Create a convenience function qemu_opts_parse_noisily() that passes errors to error_report_err(). Switch all non-QMP users outside tests to it. That leaves vnc_parse_func(). Propagate errors through it. Since I'm touching it anyway, rename it to vnc_parse(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
* util: move read_password method out of qemu-img into osdep/oslibDaniel P. Berrange2015-05-221-92/+1Star
| | | | | | | | | | | | The qemu-img.c file has a read_password() method impl that is used to prompt for passwords on the console, with impls for POSIX and Windows. This will be needed by qemu-io.c too, so move it into the QEMU osdep/oslib files where it can be shared without code duplication Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qemu-img convert: Rewrite copying logicKevin Wolf2015-04-281-206/+310
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The implementation of qemu-img convert is (a) messy, (b) buggy, and (c) less efficient than possible. The changes required to beat some sense into it are massive enough that incremental changes would only make my and the reviewers' life harder. So throw it away and reimplement it from scratch. Let me give some examples what I mean by messy, buggy and inefficient: (a) The copying logic of qemu-img convert has two separate branches for compressed and normal target images, which roughly do the same - except for a little code that handles actual differences between compressed and uncompressed images, and much more code that implements just a different set of optimisations and bugs. This is unnecessary code duplication, and makes the code for compressed output (unsurprisingly) suffer from bitrot. The code for uncompressed ouput is run twice to count the the total length for the progress bar. In the first run it just takes a shortcut and runs only half the loop, and when it's done, it toggles a boolean, jumps out of the loop with a backwards goto and starts over. Works, but pretty is something different. (b) Converting while keeping a backing file (-B option) is broken in several ways. This includes not writing to the image file if the input has zero clusters or data filled with zeros (ignoring that the backing file will be visible instead). It also doesn't correctly limit every iteration of the copy loop to sectors of the same status so that too many sectors may be copied to in the target image. For -B this gives an unexpected result, for other images it just does more work than necessary. Conversion with a compressed target completely ignores any target backing file. (c) qemu-img convert skips reading and writing an area if it knows from metadata that copying isn't needed (except for the bug mentioned above that ignores a status change in some cases). It does, however, read from the source even if it knows that it will read zeros, and then search for non-zero bytes in the read buffer, if it's possible that a write might be needed. This reimplementation of the copying core reorganises the code to remove the duplication and have a much more obvious code flow, by essentially splitting the copy iteration loop into three parts: 1. Find the number of contiguous sectors of the same status at the current offset (This can also be called in a separate loop before the copying loop in order to determine the total sectors for the progress bar.) 2. Read sectors. If the status implies that there is no data there to read (zero or unallocated cluster), don't do anything. 3. Write sectors depending on the status. If it's data, write it. If we want the backing file to be visible (with -B), don't write it. If it's zeroed, skip it if you can, otherwise use bdrv_write_zeroes() to optimise the write at least where possible. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
* qemu-img: Avoid qerror_report_err() outside QMP handlers, againMarkus Armbruster2015-03-161-4/+2Star
| | | | | | | | | | | | | qerror_report_err() is a transitional interface to help with converting existing monitor commands to QMP. It should not be used elsewhere. Replace by error_report_err(). Commit 6936f29 cleaned that up in qemu-img.c, but two calls have crept in since. Take care of them the same way. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qemu-img: Fix convert, amend error messages for unknown optionsMarkus Armbruster2015-03-161-4/+2Star
| | | | | | | Message quality regressed in commit dc523cd. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* fix GCC 5.0.0 logical-not-parentheses warningsRadim Krčmář2015-03-101-1/+2
| | | | | | | | | | | | | | | | | | | | | | | man gcc: Warn about logical not used on the left hand side operand of a comparison. This option does not warn if the RHS operand is of a boolean type. By preferring bool over int where sensible, but without modifying any depending code, make GCC happy in cases like this, qemu-img.c: In function ‘compare_sectors’: qemu-img.c:992:39: error: logical not is only applied to the left hand side of comparison [-Werror=logical-not-parentheses] if (!!memcmp(buf1, buf2, 512) != res) { hw/ide/core.c:1836 doesn't throw an error, assert(!!s->error == !!(s->status & ERR_STAT)); even thought the second operand is int (and first hunk of this patch has a very similar case), maybe GCC developers still have a little faith in C programmers. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* block: remove superfluous '\n' around error_report/error_setgGonglei2015-03-101-1/+1
| | | | | | Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* qemu-img: Suppress unhelpful extra errors in convert, amendMarkus Armbruster2015-02-261-8/+17
| | | | | | | | | | | | | | | | | | | | img_convert() and img_amend() use qemu_opts_do_parse(), which reports errors with qerror_report_err(). Its error messages aren't helpful here, the caller reports one that actually makes sense. Reproducer: $ qemu-img convert -o backing_format=raw in.img out.img qemu-img: Invalid parameter 'backing_format' qemu-img: Invalid options for file format 'raw' To fix, propagate errors through qemu_opts_do_parse(). This lifts the error reporting into callers. Drop it from img_convert() and img_amend(), keep it in qemu_chr_parse_compat(), bdrv_img_create(). Since I'm touching qemu_opts_do_parse() anyway, write a function comment for it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
* QemuOpts: Drop qemu_opt_set(), rename qemu_opt_set_err(), fix useMarkus Armbruster2015-02-261-3/+3
| | | | | | | | | | | | | | | | qemu_opt_set() is a wrapper around qemu_opt_set() that reports the error with qerror_report_err(). Most of its users assume the function can't fail. Make them use qemu_opt_set_err() with &error_abort, so that should the assumption ever break, it'll break noisily. Just two users remain, in util/qemu-config.c. Switch them to qemu_opt_set_err() as well, then rename qemu_opt_set_err() to qemu_opt_set(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-12-22 17:09:54 +0100