summaryrefslogtreecommitdiffstats
path: root/qtest.c
Commit message (Collapse)AuthorAgeFilesLines
* tests: add module loading testMarc-André Lureau2019-08-211-0/+9
| | | | | | | | This test will simply check that modules can be loaded, and no symbols are missing. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* util/qemu-timer: refactor deadline calculation for external timersPavel Dovgalyuk2019-08-201-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | icount-based record/replay uses qemu_clock_deadline_ns_all to measure the period until vCPU may be interrupted. This function takes in account the virtual timers, because they belong to the virtual devices that may generate interrupt request or affect the virtual machine state. However, there are a subset of virtual timers, that are marked with 'external' flag. These do not change the virtual machine state and only based on virtual clock. Calculating the deadling using the external timers breaks the determinism, because they do not belong to the replayed part of the virtual machine. This patch fixes the deadline calculation for this case by adding new parameter for skipping the external timers when it is needed. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> -- v2 changes: - added new parameter for timer attribute mask Message-Id: <156404426682.18669.17014100602930969222.stgit@pasha-Precision-3630-Tower> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Merge remote-tracking branch ↵Peter Maydell2019-08-161-2/+1Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/armbru/tags/pull-include-2019-08-13-v2' into staging Header cleanup patches for 2019-08-13 # gpg: Signature made Fri 16 Aug 2019 12:39:12 BST # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-include-2019-08-13-v2: (29 commits) sysemu: Split sysemu/runstate.h off sysemu/sysemu.h sysemu: Move the VMChangeStateEntry typedef to qemu/typedefs.h Include sysemu/sysemu.h a lot less Clean up inclusion of sysemu/sysemu.h numa: Move remaining NUMA declarations from sysemu.h to numa.h Include sysemu/hostmem.h less numa: Don't include hw/boards.h into sysemu/numa.h Include hw/boards.h a bit less Include hw/qdev-properties.h less Include qemu/main-loop.h less Include qemu/queue.h slightly less Include hw/hw.h exactly where needed Include qom/object.h slightly less Include exec/memory.h slightly less Include migration/vmstate.h less migration: Move the VMStateDescription typedef to typedefs.h Clean up inclusion of exec/cpu-common.h Include hw/irq.h a lot less typedefs: Separate incomplete types and function types ide: Include hw/ide/internal a bit less outside hw/ide/ ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * sysemu: Split sysemu/runstate.h off sysemu/sysemu.hMarkus Armbruster2019-08-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sysemu/sysemu.h is a rather unfocused dumping ground for stuff related to the system-emulator. Evidence: * It's included widely: in my "build everything" tree, changing sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h, down from 5400 due to the previous two commits). * It pulls in more than a dozen additional headers. Split stuff related to run state management into its own header sysemu/runstate.h. Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400 to 4200. Touching new sysemu/runstate.h recompiles some 500 objects. Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also add qemu/main-loop.h. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-30-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> [Unbreak OS-X build]
| * Include hw/qdev-properties.h lessMarkus Armbruster2019-08-161-1/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
* | qtest: Rename qtest.c:qtest_init()Oleinik, Alexander2019-08-151-2/+1Star
|/ | | | | | | | | | | Both the qtest client, libqtest.c, and server, qtest.c, used the same name for initialization functions which can cause confusion. Signed-off-by: Alexander Oleinik <alxndr@bu.edu> Message-Id: <20190805031240.6024-1-alxndr@bu.edu> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
* Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster2019-06-121-1/+1
| | | | | | | | | Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
* qtest: Move accel code to accel/qtest.cEduardo Habkost2019-05-021-34/+0Star
| | | | | | | | | | | | | | | | QTest has two parts: the server (-qtest) and the accelerator (-machine accel=qtest). The accelerator depends on CONFIG_POSIX due to its usage of sigwait(), but the server doesn't. Move the accel code to accel/qtest.c. Later we will disable compilation of accel/qtest.c on non-POSIX systems. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190422210448.2488-2-ehabkost@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> [thuth: added fixup for MAINTAINERS file] Signed-off-by: Thomas Huth <thuth@redhat.com>
* char: allow specifying a GMainContext at opening timePaolo Bonzini2019-02-131-1/+1
| | | | | | | | | | | | This will be needed by vhost-user-test, when each test switches to its own GMainLoop and GMainContext. Otherwise, for a reconnecting socket the initial connection will happen on the default GMainContext, and no one will be listening on it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20190202110834.24880-1-pbonzini@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
* avoid TABs in files that only contain a fewPaolo Bonzini2019-01-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most files that have TABs only contain a handful of them. Change them to spaces so that we don't confuse people. disas, standard-headers, linux-headers and libdecnumber are imported from other projects and probably should be exempted from the check. Outside those, after this patch the following files still contain both 8-space and TAB sequences at the beginning of the line. Many of them have a majority of TABs, or were initially committed with all tabs. bsd-user/i386/target_syscall.h bsd-user/x86_64/target_syscall.h crypto/aes.c hw/audio/fmopl.c hw/audio/fmopl.h hw/block/tc58128.c hw/display/cirrus_vga.c hw/display/xenfb.c hw/dma/etraxfs_dma.c hw/intc/sh_intc.c hw/misc/mst_fpga.c hw/net/pcnet.c hw/sh4/sh7750.c hw/timer/m48t59.c hw/timer/sh_timer.c include/crypto/aes.h include/disas/bfd.h include/hw/sh4/sh.h libdecnumber/decNumber.c linux-headers/asm-generic/unistd.h linux-headers/linux/kvm.h linux-user/alpha/target_syscall.h linux-user/arm/nwfpe/double_cpdo.c linux-user/arm/nwfpe/fpa11_cpdt.c linux-user/arm/nwfpe/fpa11_cprt.c linux-user/arm/nwfpe/fpa11.h linux-user/flat.h linux-user/flatload.c linux-user/i386/target_syscall.h linux-user/ppc/target_syscall.h linux-user/sparc/target_syscall.h linux-user/syscall.c linux-user/syscall_defs.h linux-user/x86_64/target_syscall.h slirp/cksum.c slirp/if.c slirp/ip.h slirp/ip_icmp.c slirp/ip_icmp.h slirp/ip_input.c slirp/ip_output.c slirp/mbuf.c slirp/misc.c slirp/sbuf.c slirp/socket.c slirp/socket.h slirp/tcp_input.c slirp/tcpip.h slirp/tcp_output.c slirp/tcp_subr.c slirp/tcp_timer.c slirp/tftp.c slirp/udp.c slirp/udp.h target/cris/cpu.h target/cris/mmu.c target/cris/op_helper.c target/sh4/helper.c target/sh4/op_helper.c target/sh4/translate.c tcg/sparc/tcg-target.inc.c tests/tcg/cris/check_addo.c tests/tcg/cris/check_moveq.c tests/tcg/cris/check_swap.c tests/tcg/multiarch/test-mmap.c ui/vnc-enc-hextile-template.h ui/vnc-enc-zywrle.h util/envlist.c util/readline.c The following have only TABs: bsd-user/i386/target_signal.h bsd-user/sparc64/target_signal.h bsd-user/sparc64/target_syscall.h bsd-user/sparc/target_signal.h bsd-user/sparc/target_syscall.h bsd-user/x86_64/target_signal.h crypto/desrfb.c hw/audio/intel-hda-defs.h hw/core/uboot_image.h hw/sh4/sh7750_regnames.c hw/sh4/sh7750_regs.h include/hw/cris/etraxfs_dma.h linux-user/alpha/termbits.h linux-user/arm/nwfpe/fpopcode.h linux-user/arm/nwfpe/fpsr.h linux-user/arm/syscall_nr.h linux-user/arm/target_signal.h linux-user/cris/target_signal.h linux-user/i386/target_signal.h linux-user/linux_loop.h linux-user/m68k/target_signal.h linux-user/microblaze/target_signal.h linux-user/mips64/target_signal.h linux-user/mips/target_signal.h linux-user/mips/target_syscall.h linux-user/mips/termbits.h linux-user/ppc/target_signal.h linux-user/sh4/target_signal.h linux-user/sh4/termbits.h linux-user/sparc64/target_syscall.h linux-user/sparc/target_signal.h linux-user/x86_64/target_signal.h linux-user/x86_64/termbits.h pc-bios/optionrom/optionrom.h slirp/mbuf.h slirp/misc.h slirp/sbuf.h slirp/tcp.h slirp/tcp_timer.h slirp/tcp_var.h target/i386/svm.h target/sparc/asi.h target/xtensa/core-dc232b/xtensa-modules.inc.c target/xtensa/core-dc233c/xtensa-modules.inc.c target/xtensa/core-de212/core-isa.h target/xtensa/core-de212/xtensa-modules.inc.c target/xtensa/core-fsf/xtensa-modules.inc.c target/xtensa/core-sample_controller/core-isa.h target/xtensa/core-sample_controller/xtensa-modules.inc.c target/xtensa/core-test_kc705_be/core-isa.h target/xtensa/core-test_kc705_be/xtensa-modules.inc.c tests/tcg/cris/check_abs.c tests/tcg/cris/check_addc.c tests/tcg/cris/check_addcm.c tests/tcg/cris/check_addoq.c tests/tcg/cris/check_bound.c tests/tcg/cris/check_ftag.c tests/tcg/cris/check_int64.c tests/tcg/cris/check_lz.c tests/tcg/cris/check_openpf5.c tests/tcg/cris/check_sigalrm.c tests/tcg/cris/crisutils.h tests/tcg/cris/sys.c tests/tcg/i386/test-i386-ssse3.c ui/vgafont.h Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20181213223737.11793-3-pbonzini@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qtest: Add set_irq_in command to set IRQ/GPIO levelSteffen Görtz2019-01-071-0/+43
| | | | | | | | | | | | | | | | | | | | | Adds a new qtest command "set_irq_in" which allows to set qemu gpio lines to a given level. Based on https://lists.gnu.org/archive/html/qemu-devel/2012-12/msg02363.html which never got merged. Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190103091119.9367-2-stefanha@redhat.com Originally-by: Matthew Ogilvie <mmogilvi_qemu@miniinfo.net> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* qtest: Use cpu address space instead of system memoryJulia Suvorova2018-07-061-13/+26
| | | | | | | | | Some devices (like nvic in armv7m) are not accessable through address_space_memory, therefore can not be tested with qtest. Signed-off-by: Julia Suvorova <jusual@mail.ru> Message-Id: <20180702065237.27899-1-jusual@mail.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qtest: Don't perform side effects inside assertionEric Blake2017-09-151-24/+58
| | | | | | | | | | Assertions should be separate from the side effects, since in theory, g_assert() can be disabled (in practice, we can't really ever do that). Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
* char: add backend hotswap handlerAnton Nefedov2017-07-141-1/+1
| | | | | | | | | | | Frontends should have an interface to setup the handler of a backend change. The interface will be used in the next commits Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1499342940-56739-3-git-send-email-anton.nefedov@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* char: move CharBackend handling in char-fe unitMarc-André Lureau2017-06-021-1/+1
| | | | | | | | | | | | | | Move all the frontend struct and methods to a seperate unit. This avoids accidentally mixing backend and frontend calls, and helps with readabilty. Make qemu_chr_replay() a macro shared by both char and char-fe. Export qemu_chr_write(), and use a macro for qemu_chr_write_all() (nb: yes, CharBackend is for char frontend :) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
* chardev: move headers to include/chardevMarc-André Lureau2017-06-021-1/+1
| | | | | | | | So they are all in one place. The following patch will move serial & parallel declarations to the respective headers. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
* qtest: fix a memory leakMarc-André Lureau2017-02-281-0/+1
| | | | | | | | Spotted by ASAN. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
* util/cutils: Rename qemu_strtoll(), qemu_strtoull()Markus Armbruster2017-02-231-17/+17
| | | | | | | | | | | | | The name qemu_strtoll() suggests conversion to long long, but it actually converts to int64_t. Rename to qemu_strtoi64(). The name qemu_strtoull() suggests conversion to unsigned long long, but it actually converts to uint64_t. Rename to qemu_strtou64(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1487708048-2131-7-git-send-email-armbru@redhat.com>
* char: rename CharDriverState ChardevMarc-André Lureau2017-01-271-1/+1
| | | | | | | | Pick a uniform chardev type name. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* libqtest: handle zero length memwrite/memreadGreg Kurz2017-01-121-0/+2
| | | | | | | | | | | | | | | | | | | Some recently added tests pass a zero length to qtest_memwrite(). Unfortunately, the qtest protocol doesn't implement an on-the-wire syntax for zero-length writes and the current code happily sends garbage to QEMU. This causes intermittent failures. It isn't worth the pain to enhance the protocol, so this patch simply fixes the issue by "just return, doing nothing". The same fix is applied to qtest_memread() since the issue also exists in the QEMU part of the "memread" command. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 148412457273.22750.983275587432075569.stgit@bahia Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* char: remove explicit_fe_open, use a set_handlers argumentMarc-André Lureau2016-10-241-1/+1
| | | | | | | | | No need to keep explicit_fe_open around if it affects only a qemu_chr_fe_set_handlers(). Use an additional argument instead. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-24-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* char: use qemu_chr_fe* functions with CharBackend argumentMarc-André Lureau2016-10-241-11/+12
| | | | | | | | | | | This also switches from qemu_chr_add_handlers() to qemu_chr_fe_set_handlers(). Note that qemu_chr_fe_set_handlers() now takes the focus when fe_open (qemu_chr_add_handlers() did take the focus) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-16-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* char: remaining switch to CharBackend in frontendMarc-André Lureau2016-10-241-4/+4
| | | | | | | | | Similar to previous change, for the remaining CharDriverState front ends users. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-13-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* char: remove init callbackMarc-André Lureau2016-10-241-1/+1
| | | | | | | | | | The CharDriverState.init() callback is no longer set since commit a61ae7f88ce and thus unused. The only user, the malta FGPA display has been converted to use an event "opened" callback instead. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-7-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qtest: ask endianness of the target in qtest_init()Laurent Vivier2016-10-141-0/+7
| | | | | | | | | | | | | | | The target endianness is not deduced anymore from the architecture name but asked directly to the guest, using a new qtest command: "endianness". As it can't change (this is the value of TARGET_WORDS_BIGENDIAN), we store it to not have to ask every time we want to know if we have to byte-swap a value. Signed-off-by: Laurent Vivier <lvivier@redhat.com> CC: Greg Kurz <groug@kaod.org> CC: David Gibson <david@gibson.dropbear.id.au> CC: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* tests: add RTAS command in the protocolLaurent Vivier2016-09-231-0/+17
| | | | | | | | | | | Add a first test to validate the protocol: - rtas/get-time-of-day compares the time from the guest with the time from the host. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* qtest: replace strtoXX() by qemu_strtoXX()Laurent Vivier2016-09-231-23/+26
| | | | | | | | | | Check the result of qemu_strtoXX() and assert if the string cannot be converted. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* qtest.c: Allow zero size in memset qtest commandsPeter Maydell2016-09-091-4/+7
| | | | | | | | | | | | Some tests use the qtest protocol "memset" command with a zero size, expecting it to do nothing. However in the current code this will result in calling memset() with a NULL pointer, which is undefined behaviour. Detect and specially handle zero sizes to avoid this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1470393800-7882-1-git-send-email-peter.maydell@linaro.org
* qemu-common: push cpu.h inclusion out of qemu-common.hPaolo Bonzini2016-05-191-0/+2
| | | | Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster2016-03-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* all: Clean up includesPeter Maydell2016-02-041-0/+1
| | | | | | | | | | Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1454089805-5470-16-git-send-email-peter.maydell@linaro.org
* Move page_size_init earlierDr. David Alan Gilbert2015-11-101-1/+0Star
| | | | | | | | | | | | | The HOST_PAGE_ALIGN macros don't work until the page size variables have been set up; later in postcopy I use those macros in the RAM code, and it can be triggered using -object. Fix this by initialising page_size_init() earlier - it's currently initialised inside the accelerators, move it up into vl.c. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
* Init page sizes in qtestDr. David Alan Gilbert2015-09-291-0/+1
| | | | | | | | | | | One of my patches used a loop that was based on host page size; it dies in qtest since qtest hadn't bothered init'ing it. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Message-Id: <1439463094-5394-4-git-send-email-dgilbert@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
* qtest: pre-buffer hex nibsJohn Snow2015-05-221-4/+7
| | | | | | | | | | | | Instead of converting each byte one-at-a-time and then sending each byte over the wire, use sprintf() to pre-compute all of the hex nibs into a single buffer, then send the entire buffer all at once. This gives a moderate speed boost to memread() and memwrite() functions. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1431021095-7558-2-git-send-email-jsnow@redhat.com
* qtest: add memset to qtest protocolJohn Snow2015-05-221-0/+20
| | | | | | | | | | | Previously, memset was just a frontend to write() and only stupidly sent the pattern many times across the wire. Let's not discuss who stupidly wrote it like that in the first place. (Hint: It was me.) Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1430864578-22072-4-git-send-email-jsnow@redhat.com
* qtest: Add base64 encoded read/writeJohn Snow2015-05-221-0/+69
| | | | | | | | | | | | | | | | | | | For larger pieces of data that won't need to be debugged and viewing the hex nibbles is unlikely to be useful, we can encode data using base64 instead of encoding each byte as %02x, which leads to some space savings and faster reads/writes. For now, the default is left as hex nibbles in memwrite() and memread(). For the purposes of making qtest io easier to read and debug, some callers may want to specify using the old encoding format for small patches of data where the savings from base64 wouldn't be that profound. memwrite/memread use a data encoding that takes 2x the size of the original buffer, but base64 uses "only" (4/3)x, so for larger buffers we can save a decent amount of time and space. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1430864578-22072-3-git-send-email-jsnow@redhat.com
* qtest: allow arbitrarily long sendsJohn Snow2015-05-221-18/+28
| | | | | | | | | | | | | | | | qtest currently has a static buffer of size 1024 that if we overflow, ignores the additional data silently which leads to hangs or stream failures. Use glib's string facilities to allow arbitrarily long data, but split this off into a new function, qtest_sendf. Static data can still be sent using qtest_send, which avoids the malloc/copy overhead. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1430864578-22072-2-git-send-email-jsnow@redhat.com
* qtest: Use qemu_opt_set() instead of qemu_opts_parse()Markus Armbruster2015-02-261-7/+4Star
| | | | | Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
* qtest: fix qtest log fd should be initialized before qtest chardevLi Liu2014-10-231-5/+4Star
| | | | | | | | | | | | | | | | qtest_log_fp should be inited before qemu_chr_add_handlers. If not the log dumped from callback functions may be lost. easy to reproduce it by command: "QTEST_LOG=1 QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 gtester -k --verbose -m=quick tests/qdev-monitor-test" The log "[I xxxxxx] OPENED" should be printed out by qtest_event, but does not. Signed-off-by: Li Liu <john.liuli@huawei.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qtest/irq: Rework IRQ interceptionPeter Crosthwaite2014-10-231-4/+11
| | | | | | | | | | | | | | | | Change the qtest intercept handler to accept just the individual IRQ being intercepted as opaque. n is still expected to be correctly set as for the original intercepted irq. qemu_intercept_irq_in is updated accordingly. Then covert the qemu_irq_intercept_out call to use qdev intercept version. This stops qtest from having to mess with the raw IRQ pointers (still has to mess with names and counts but a step in the right direction). Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* accel: Pass MachineState object to accel init functionsEduardo Habkost2014-10-091-1/+1
| | | | | | | | | | | Most of the machine options and machine state information is in the MachineState object, not on the MachineClass. This will allow init functions to use the MachineState object directly instead of qemu_get_machine_opts() or the current_machine global. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* accel: Rename 'init' method to 'init_machine'Eduardo Habkost2014-10-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Today, all accelerator init functions affect some global state: * tcg_init() calls tcg_exec_init() and affects globals such as tcg_tcx, page size globals, and possibly others; * kvm_init() changes the kvm_state global, cpu_interrupt_handler, and possibly others; * xen_init() changes the xen_xc global, and registers a change state handler. With the new accelerator QOM classes, initialization may now be split in two steps: * instance_init() will do basic initialization that doesn't affect any global state and don't need MachineState or MachineClass data. This will allow probing code to safely create multiple accelerator objects on the fly just for reporting host/accelerator capabilities, for example. * accel_init_machine()/init_machine() will save the accelerator object in MachineState, and do initialization steps which still affect global state, machine state, or that need data from MachineClass or MachineState. To clarify the difference between those two steps, rename init() to init_machine(). Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* accel: Move qtest accel registration to qtest.cEduardo Habkost2014-10-041-1/+26
| | | | | | | | | | | | As qtest_availble() returns 1 only when CONFIG_POSIX is set, keep setting AccelClass.available to keep current behavior (this is different from what we did for KVM and Xen). This also allows us to make qtest_init_accel() static. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* icount: Add QemuOpts for icountSebastian Tanase2014-08-061-2/+11
| | | | | | | | | Make icount parameter use QemuOpts style options in order to easily add other suboptions. Signed-off-by: Sebastian Tanase <sebastian.tanase@openwide.fr> Tested-by: Camille Bégué <camille.begue@openwide.fr> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qtest: fix hex2nib for capital charactersSergey Fedorov2014-06-101-1/+1
| | | | | | | Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* qdev: Implement named GPIOsPeter Crosthwaite2014-05-281-5/+14
| | | | | | | | | | | Implement named GPIOs on the Device layer. Listifies the existing GPIOs stuff using string keys. Legacy un-named GPIOs are preserved by using a NULL name string - they are just a single matchable element in the name list. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
* machine: Replace QEMUMachine by MachineClass in accelerator configurationMarcel Apfelbaum2014-05-051-1/+1
| | | | | | | This minimizes QEMUMachine usage, as part of machine QOM-ification. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
* kvm: Add a new machine option kvm-typeAneesh Kumar K.V2014-03-051-1/+1
| | | | | | | | | | | | Targets like ppc64 support different types of KVM, one which use hypervisor mode and the other which doesn't. Add a new machine option kvm-type that helps in selecting the respective ones We also add a new QEMUMachine callback get_vm_type that helps in mapping the string representation of kvm type specified. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> [agraf: spelling fixes, use error_report(), use qemumachine.h] Signed-off-by: Alexander Graf <agraf@suse.de>
* qtest: Don't segfault with invalid -qtest optionFam Zheng2014-02-141-1/+7
| | | | | | | | | | | | This prints an error message, instead of core dump, when "-qtest" option value is invalid, e.g.: $ ./x86_64-softmmu/qemu-system-x86_64 -qtest unknown qemu-system-x86_64: Failed to initialize device for qtest: "unknown" Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
* qtest: don't report signals if qtest driver enabledMichael S. Tsirkin2014-02-131-0/+5
| | | | | | | | | | | | qtest driver always uses signals to kill qemu no need to report it, whatever the accelerator state. Add API to detect qtest driver, and suppress reporting signals in this case. Reported-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-12-12 03:30:02 +0100