summaryrefslogtreecommitdiffstats
path: root/target-mips/cpu.h
Commit message (Collapse)AuthorAgeFilesLines
* target-mips: add MTHC0 and MFHC0 instructionsLeon Alrae2015-06-121-0/+1
| | | | | | | | | | | | | | Implement MTHC0 and MFHC0 instructions. In MIPS32 they are used to access upper word of extended to 64-bits CP0 registers. In MIPS64, when CP0 destination register specified is the EntryLo0 or EntryLo1, bits 1:0 of the GPR appear at bits 31:30 of EntryLo0 or EntryLo1. This is to compensate for RI and XI, which were shifted to bits 63:62 by MTC0 to EntryLo0 or EntryLo1. Therefore creating separate functions for EntryLo0 and EntryLo1. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
* target-mips: add CP0.PageGrain.ELPA supportLeon Alrae2015-06-121-2/+25
| | | | | | | | | | | | | | | | | | | | | | | | CP0.PageGrain.ELPA enables support for large physical addresses. This field is encoded as follows: 0: Large physical address support is disabled. 1: Large physical address support is enabled. If this bit is a 1, the following changes occur to coprocessor 0 registers: - The PFNX field of the EntryLo0 and EntryLo1 registers is writable and concatenated with the PFN field to form the full page frame number. - Access to optional COP0 registers with PA extension, LLAddr, TagLo is defined. P5600 can operate in 32-bit or 40-bit Physical Address Mode. Therefore if XPA is disabled (CP0.PageGrain.ELPA = 0) then assume 32-bit Address Mode. In MIPS64 assume 36 as default PABITS (when CP0.PageGrain.ELPA = 0). env->PABITS value is constant and indicates maximum PABITS available on a core, whereas env->PAMask is calculated from env->PABITS and is also affected by CP0.PageGrain.ELPA. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
* target-mips: extend selected CP0 registers to 64-bits in MIPS32Leon Alrae2015-06-121-7/+7
| | | | | | | | | | | Extend EntryLo0, EntryLo1, LLAddr and TagLo from 32 to 64 bits in MIPS32. Introduce gen_move_low32() function which moves low 32 bits from 64-bit temp to GPR; it sign extends 32-bit value on MIPS64 and truncates on MIPS32. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
* target-mips: add ERETNC instruction and Config5.LLB bitLeon Alrae2015-06-111-0/+1
| | | | | | | | | | | ERETNC is identical to ERET except that an ERETNC will not clear the LLbit that is set by execution of an LL instruction, and thus when placed between an LL and SC sequence, will never cause the SC to fail. Presence of ERETNC is denoted by the Config5.LLB. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
* target-mips: add Config5.FRE support allowing Status.FR=0 emulationLeon Alrae2015-06-111-2/+11
| | | | | | | | | | | | | | | | | | This relatively small architectural feature adds the following: FIR.FREP: Read-only. If FREP=1, then Config5.FRE and Config5.UFE are available. Config5.FRE: When enabled all single-precision FP arithmetic instructions, LWC1/LWXC1/MTC1, SWC1/SWXC1/MFC1 cause a Reserved Instructions exception. Config5.UFE: Allows user to write/read Config5.FRE using CTC1/CFC1 instructions. Enable the feature in MIPS64R6-generic CPU. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* Merge remote-tracking branch 'remotes/lalrae/tags/mips-20150311' into stagingPeter Maydell2015-03-111-2/+17
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MIPS patches 2015-03-11 Changes: * use VMStateDescription for MIPS CPU # gpg: Signature made Wed Mar 11 15:01:52 2015 GMT using RSA key ID 0B29DA6B # gpg: Can't check signature: public key not found * remotes/lalrae/tags/mips-20150311: target-mips: add missing MSACSR and restore fp_status and hflags target-mips: replace cpu_save/cpu_load with VMStateDescription Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * target-mips: add missing MSACSR and restore fp_status and hflagsLeon Alrae2015-03-111-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | Save MSACSR state. Also remove fp_status, msa_fp_status, hflags and restore them in post_load() from the architectural registers. Float exception flags are not present in vmstate. Information they carry is used only by softfloat caller who translates them into MIPS FCSR.Cause, FCSR.Flags and then they are cleared. Therefore there is no need for saving them in vmstate. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
| * target-mips: replace cpu_save/cpu_load with VMStateDescriptionLeon Alrae2015-03-111-2/+0Star
| | | | | | | | | | | | | | Create VMStateDescription for MIPS CPU. The new structure contains exactly the same fields as before, therefore leaving existing version_id. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* | cpu: Make cpu_init() return QOM CPUState objectEduardo Habkost2015-03-101-8/+1Star
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of making cpu_init() return CPUArchState, return CPUState. Changes were made using the Coccinelle semantic patch below. @@ typedef CPUState; identifier e; expression args; type CPUArchState; @@ - e = + cpu = cpu_init(args); - if (!e) { + if (!cpu) { ... } - cpu = ENV_GET_CPU(env); + e = cpu->env_ptr; @@ identifier new_env, new_cpu, env, cpu; type CPUArchState; expression args; @@ -{ - CPUState *cpu = ENV_GET_CPU(env); - CPUArchState *new_env = cpu_init(args); - CPUState *new_cpu = ENV_GET_CPU(new_env); +{ + CPUState *cpu = ENV_GET_CPU(env); + CPUState *new_cpu = cpu_init(args); + CPUArchState *new_env = new_cpu->env_ptr; ... } @@ identifier c, cpu_init_func, cpu_model; type StateType, CPUType; @@ -static inline StateType* cpu_init(const char *cpu_model) -{ - CPUType *c = cpu_init_func(cpu_model); ( - if (c == NULL) { - return NULL; - } - return &c->env; | - if (c) { - return &c->env; - } - return NULL; ) -} +#define cpu_init(cpu_model) CPU(cpu_init_func(cpu_model)) @@ identifier cpu_init_func; identifier model; @@ -#define cpu_init(model) (&cpu_init_func(model)->env) +#define cpu_init(model) CPU(cpu_init_func(model)) Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Riku Voipio <riku.voipio@iki.fi> Cc: Richard Henderson <rth@twiddle.net> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Michael Walle <michael@walle.cc> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Anthony Green <green@moxielogic.com> Cc: Jia Liu <proljc@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Max Filippov <jcmvbkbc@gmail.com> [AF: Fixed up cpu_copy() manually] Signed-off-by: Andreas Färber <afaerber@suse.de>
* exec.c: Drop TARGET_HAS_ICE define and checksPeter Maydell2015-01-201-1/+0Star
| | | | | | | | | | | | | | The TARGET_HAS_ICE #define is intended to indicate whether a target-* guest CPU implementation supports the breakpoint handling. However, all our guest CPUs have that support (the only two which do not define TARGET_HAS_ICE are unicore32 and openrisc, and in both those cases the bp support is present and the lack of the #define is just a bug). So remove the #define entirely: all new guest CPU support should include breakpoint handling as part of the basic implementation. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-id: 1420484960-32365-1-git-send-email-peter.maydell@linaro.org
* target-mips: Add missing calls to synchronise SoftFloat statusMaciej W. Rozycki2014-12-161-0/+12
| | | | | | | | | | | | | | | | Add missing calls to synchronise the SoftFloat status with the CP1.FSCR: + for the rounding and flush-to-zero modes upon processor reset, + for the flush-to-zero mode on FSCR updates through the GDB stub. Refactor code accordingly and remove the redundant RESTORE_ROUNDING_MODE macro. Signed-off-by: Thomas Schwinge <thomas@codesourcery.com> Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: Correct 32-bit address space wrappingMaciej W. Rozycki2014-12-161-3/+5
| | | | | | | | | | | | | | | | | Make sure the address space is unconditionally wrapped on 32-bit processors, that is ones that do not implement at least the MIPS III ISA. Also make MIPS16 SAVE and RESTORE instructions use address calculation rather than plain arithmetic operations for stack pointer manipulation so that their semantics for stack accesses follows the architecture specification. That in particular applies to user software run on 64-bit processors with the CP0.Status.UX bit clear where the address space is wrapped to 32 bits. Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: Tighten ISA level checksMaciej W. Rozycki2014-12-161-3/+4
| | | | | | | | | | | Tighten ISA level checks down to MIPS II that many of our instructions are missing. Also make sure any 64-bit instruction enables are only applied to 64-bit processors, that is ones that implement at least the MIPS III ISA. Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: Correct the writes to Status and Cause registers via gdbstubMaciej W. Rozycki2014-12-161-0/+89
| | | | | | | | | | | | | | | Make writes to CP0.Status and CP0.Cause have the same effect as executing corresponding MTC0 instructions would in Kernel Mode. Also ignore writes in the user emulation mode. Currently for requests from the GDB stub we write all the bits across both registers, ignoring any read-only locations, and do not synchronise the environment to evaluate side effects. We also write these registers in the user emulation mode even though a real kernel presents them as read only. Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: Make CP0.Config4 and CP0.Config5 registers signedMaciej W. Rozycki2014-12-161-4/+4
| | | | | | | | | | Make the data type used for the CP0.Config4 and CP0.Config5 registers and their mask signed, for consistency with the remaining 32-bit CP0 registers, like CP0.Config0, etc. Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* mips: Add macros for CP0.Config3 and CP0.Config4 bitsMaciej W. Rozycki2014-11-071-0/+13
| | | | | | | | Define macros for CP0.Config3 and CP0.Config4 bits. These used to be exhaustive as at MIPS32r3, but more bits may have been added since. Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: remove duplicated mips/ieee mapping functionYongbok Kim2014-11-031-0/+4
| | | | | | | | | | Remove the duplicated ieee_rm in gdbstub.c. Make the other ieee_rm and ieee_ex_to_mips available to other files. Reviewed-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: add MSA defines and data structureYongbok Kim2014-11-031-2/+50
| | | | | | | | add defines and data structure for MIPS SIMD Architecture Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: CP0_Status.CU0 no longer allows the user to access CP0Leon Alrae2014-11-031-1/+2
| | | | | Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
* target-mips: implement forbidden slotLeon Alrae2014-11-031-1/+2
| | | | | | | | | | | | | When conditional compact branch is encountered decode one more instruction in current translation block - that will be forbidden slot. Instruction in forbidden slot will be executed only if conditional compact branch is not taken. Any control transfer instruction (CTI) which are branches, jumps, ERET, DERET, WAIT and PAUSE will generate RI exception if executed in forbidden or delay slot. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
* target-mips: add Config5.SBRILeon Alrae2014-11-031-2/+9
| | | | | | | | | | | | | SDBBP instruction Reserved Instruction control. The purpose of this field is to restrict availability of SDBBP to kernel mode operation. If the bit is set then SDBBP instruction can only be executed in kernel mode. User execution of SDBBP will cause a Reserved Instruction exception. Additionally add missing Config4 and Config5 cases for dm{f,t}c0. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
* target-mips: update cpu_save/cpu_load to support new registersLeon Alrae2014-11-031-1/+1
| | | | | Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
* target-mips: add BadInstr and BadInstrP supportLeon Alrae2014-11-031-0/+6
| | | | | | | | | | | | | | | | | BadInstr Register (CP0 Register 8, Select 1) The BadInstr register is a read-only register that capture the most recent instruction which caused an exception. BadInstrP Register (CP0 Register 8, Select 2) The BadInstrP register contains the prior branch instruction, when the faulting instruction is in a branch delay slot. Using error_code to indicate whether AdEL or TLBL was triggered during instruction fetch, in this case BadInstr is not updated as valid instruction word is not available. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
* target-mips: add TLBINV supportLeon Alrae2014-11-031-0/+7
| | | | | | | | | | | | | | | | For Standard TLB configuration (Config.MT=1): TLBINV invalidates a set of TLB entries based on ASID. The virtual address is ignored in the entry match. TLB entries which have their G bit set to 1 are not modified. TLBINVF causes all entries to be invalidated. Single TLB entry can be marked as invalid on TLB entry write by having EntryHi.EHINV set to 1. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
* target-mips: add new Read-Inhibit and Execute-Inhibit exceptionsLeon Alrae2014-11-031-1/+4
| | | | | | | | | | | | | | | An Execute-Inhibit exception occurs when the virtual address of an instruction fetch matches a TLB entry whose XI bit is set. This exception type can only occur if the XI bit is implemented within the TLB and is enabled, this is denoted by the PageGrain XIE bit. An Read-Inhibit exception occurs when the virtual address of a memory load reference matches a TLB entry whose RI bit is set. This exception type can only occur if the RI bit is implemented within the TLB and is enabled, this is denoted by the PageGrain RIE bit. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
* target-mips: update PageGrain and m{t,f}c0 EntryLo{0,1}Leon Alrae2014-11-031-0/+4
| | | | | | | | | | | | PageGrain needs rw bitmask which differs between MIPS architectures. In pre-R6 if RIXI is supported, PageGrain.XIE and PageGrain.RIE are writeable, whereas in R6 they are read-only 1. On MIPS64 mtc0 instruction left shifts bits 31:30 for MIPS32 backward compatiblity, therefore there are separate mtc0 and dmtc0 helpers. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
* target-mips: add RI and XI fields to TLB entryLeon Alrae2014-11-031-0/+11
| | | | | | | | | | In Revision 3 of the architecture, the RI and XI bits were added to the TLB to enable more secure access of memory pages. These bits (along with the Dirty bit) allow the implementation of read-only, write-only, no-execute access policies for mapped pages. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
* target-mips: add KScratch registersLeon Alrae2014-11-031-0/+3
| | | | | | | | | | | | | | KScratch<n> Registers (CP0 Register 31, Selects 2 to 7) The KScratch registers are read/write registers available for scratch pad storage by kernel mode software. They are 32-bits in width for 32-bit processors and 64-bits for 64-bit processors. CP0Config4.KScrExist[2:7] bits indicate presence of CP0_KScratch1-6 registers. For Release 6, all KScratch registers are required. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
* target-mips: fix broken MIPS16 and microMIPSYongbok Kim2014-10-141-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | Commit 240ce26a broke MIPS16 and microMIPS support as it didn't care those branches and jumps don't have delay slot in MIPS16 and microMIPS. This patch introduces a new argument delayslot_size to the gen_compute_branch() indicating size of delay slot {0, 2, 4}. And the information is used to call handle_delay_slot() forcingly when no delay slot is required. There are some microMIPS branch and jump instructions that requires exact size of instruction in the delay slot. For indicating these instructions, MIPS_HFLAG_BDS_STRICT flag is introduced. Those fictional branch opcodes defined to support MIPS16 and microMIPS are no longer needed. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Tested-by: Jonas Gorski <jogo@openwrt.org> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> [leon.alrae@imgtec.com: cosmetic changes] Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: Status.UX/SX/KX enable 32-bit address wrappingLeon Alrae2014-10-131-4/+14
| | | | | | | | | In R6 the special behaviour for data references is also specified for Kernel and Supervisor mode. Therefore MIPS_HFLAG_UX is replaced by generic MIPS_HFLAG_AWRAP indicating enabled 32-bit address wrapping. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
* target-mips: implement UserLocal RegisterPetar Jovanovic2014-06-181-4/+7
| | | | | | | | | | | | | | | | | | | | | | From MIPS documentation (Volume III): UserLocal Register (CP0 Register 4, Select 2) Compliance Level: Recommended. The UserLocal register is a read-write register that is not interpreted by the hardware and conditionally readable via the RDHWR instruction. This register only exists if the Config3-ULRI register field is set. Privileged software may write this register with arbitrary information and make it accessible to unprivileged software via register 29 (ULR) of the RDHWR instruction. To do so, bit 29 of the HWREna register must be set to a 1 to enable unprivileged access to the register. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* softmmu: move ALIGNED_ONLY to cpu.hPaolo Bonzini2014-06-051-0/+1
| | | | | | | Prepare for moving softmmu_header.h inclusion out of .c files Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* target-mips: Avoid shifting left into sign bitPeter Maydell2014-03-271-1/+1
| | | | | | | | Add U suffix to various places where we shift a 1 left by 31, to avoid undefined behaviour. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* cpu: Move breakpoints field from CPU_COMMON to CPUStateAndreas Färber2014-03-131-0/+1
| | | | | | | | Most targets were using offsetof(CPUFooState, breakpoints) to determine how much of CPUFooState to clear on reset. Use the next field after CPU_COMMON instead, if any, or sizeof(CPUFooState) otherwise. Signed-off-by: Andreas Färber <afaerber@suse.de>
* cpu: Turn cpu_handle_mmu_fault() into a CPUClass hookAndreas Färber2014-03-131-3/+2Star
| | | | | | | | Note that while such functions may exist both for *-user and softmmu, only *-user uses the CPUState hook, while softmmu reuses the prototype for calling it directly. Signed-off-by: Andreas Färber <afaerber@suse.de>
* cpu: Turn cpu_has_work() into a CPUClass hookAndreas Färber2014-03-131-28/+0Star
| | | | | | | | | Default to false. Tidy variable naming and inline cast uses while at it. Tested-by: Jia Liu <proljc@gmail.com> (or32) Signed-off-by: Andreas Färber <afaerber@suse.de>
* target-mips: add support for CP0_Config5Petar Jovanovic2014-02-101-0/+10
| | | | | | | Add CP0_Config5, define rw_bitmask and enable modifications. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Eric Johnson <eric.johnson@imgtec.com>
* target-mips: add support for CP0_Config4Petar Jovanovic2014-02-101-0/+3
| | | | | | | Add CP0_Config4, define rw_bitmask. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Eric Johnson <eric.johnson@imgtec.com>
* misc: Replace 'struct QEMUTimer' by 'QEMUTimer'Stefan Weil2013-12-021-1/+1
| | | | | | | | Most code already used QEMUTimer without the redundant 'struct' keyword. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* cpu: Introduce CPUClass::synchronize_from_tb() for cpu_pc_from_tb()Andreas Färber2013-07-231-7/+0Star
| | | | | | | Where no extra implementation is needed, fall back to CPUClass::set_pc(). Acked-by: Michael Walle <michael@walle.cc> (for lm32) Signed-off-by: Andreas Färber <afaerber@suse.de>
* linux-user: Move cpu_clone_regs() and cpu_set_tls() into linux-userPeter Maydell2013-07-091-13/+0Star
| | | | | | | | | | | | | The functions cpu_clone_regs() and cpu_set_tls() are not purely CPU related -- they are specific to the TLS ABI for a a particular OS. Move them into the linux-user/ tree where they belong. target-lm32 had entirely unused implementations, since it has no linux-user target; just drop them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
* cpu: Turn cpu_unassigned_access() into a CPUState hookAndreas Färber2013-06-281-2/+3
| | | | | | | Use it for all targets, but be careful not to pass invalid CPUState. cpu_single_env can be NULL, e.g. on Xen. Signed-off-by: Andreas Färber <afaerber@suse.de>
* linux-user: Save the correct resume address for MIPS signal handlingKwok Cheung Yeung2013-05-201-0/+1
| | | | | | | | | | | | | | The current ISA mode needs to be saved in bit 0 of the resume address. If the current instruction happens to be in a branch delay slot, then the address of the preceding jump instruction should be stored instead. exception_resume_pc already does both of these tasks, so it is made available and reused. MIPS_HFLAG_BMASK in hflags is cleared, otherwise QEMU may treat the first instruction of the signal handler as a delay slot instruction. Signed-off-by: Kwok Cheung Yeung <kcy@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* cpu: Replace do_interrupt() by CPUClass::do_interrupt methodAndreas Färber2013-03-121-1/+0Star
| | | | | | | | | | This removes a global per-target function and thus takes us one step closer to compiling multiple targets into one executable. It will also allow to override the interrupt handling for certain CPU families. Signed-off-by: Andreas Färber <afaerber@suse.de>
* cpu: Move halted and interrupt_request fields to CPUStateAndreas Färber2013-03-121-2/+2
| | | | | | | | | | Both fields are used in VMState, thus need to be moved together. Explicitly zero them on reset since they were located before breakpoints. Pass PowerPCCPU to kvmppc_handle_halt(). Signed-off-by: Andreas Färber <afaerber@suse.de>
* mips-linux-user: Save and restore fpu and dsp from sigcontextRichard Henderson2013-03-051-0/+3
| | | | | Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* target-mips: Move TCG initialization to MIPSCPU initfnAndreas Färber2013-02-161-0/+1
| | | | | | | Make mips_tcg_init() non-static and add tcg_enabled() check to suppress it for qtest. Signed-off-by: Andreas Färber <afaerber@suse.de>
* target-mips: Allow DSP access to be disabled once enabled.Eric Johnson2013-01-081-1/+1
| | | | | | | | Clear the DSP hflags at the start of compute_hflags. Otherwise access is not properly disabled once enabled. Signed-off-by: Eric Johnson <ericj@mips.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* fpu: move public header file to include/fpuPaolo Bonzini2012-12-191-1/+1
| | | | Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* exec: move include files to include/exec/Paolo Bonzini2012-12-191-3/+3
| | | | Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-12-22 19:39:30 +0100