summaryrefslogtreecommitdiffstats
path: root/target-mips/translate.c
Commit message (Collapse)AuthorAgeFilesLines
* tcg: Add type for vCPU pointersLluís Vilanova2016-03-011-1/+1
| | | | | | | | | | | | | | | | | | | | Adds the 'TCGv_env' type for pointers to 'CPUArchState' objects. The tracing infrastructure later needs to differentiate between regular pointers and pointers to vCPUs. Also changes all targets to use the new 'TCGv_env' type instead of the generic 'TCGv_ptr'. As of now, the change is merely cosmetic ('TCGv_env' translates into 'TCGv_ptr'), but that could change in the future to enforce the difference. Note that a 'TCGv_env' type (for 'CPUState') is not added, since all helpers currently receive the architecture-specific pointer ('CPUArchState'). Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Acked-by: Richard Henderson <rth@twiddle.net> Message-id: 145641859552.30295.7821536833590725201.stgit@localhost Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* target-mips: implement R6 multi-threadingYongbok Kim2016-02-261-0/+59
| | | | | | | | | | | MIPS Release 6 provides multi-threading features which replace pre-R6 MT Module. CP0.Config3.MT is always 0 in R6, instead there is new CP0.Config5.VP (Virtual Processor) bit which indicates presence of multi-threading support which includes CP0.GlobalNumber register and DVP/EVP instructions. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* tcg: Change tcg_global_mem_new_* to take a TCGv_ptrRichard Henderson2016-02-091-12/+13
| | | | | | | | Thus, use cpu_env as the parameter, not TCG_AREG0 directly. Update all uses in the translators. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
* log: do not unnecessarily include qom/cpu.hPaolo Bonzini2016-02-031-0/+1
| | | | | | | | | | Split the bits that require it to exec/log.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-id: 1452174932-28657-8-git-send-email-den@openvz.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* mips: Clean up includesPeter Maydell2016-01-231-0/+1
| | | | | | | | | | | Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: Fix ALIGN instruction when bp=0Miodrag Dinic2016-01-231-1/+10
| | | | | | | | | | | | | | | | | | If executing ALIGN with shift count bp=0 within mips64 emulation, the result of the operation should be sign extended. Taken from the official documentation (pseudo code) : ALIGN: tmp_rt_hi = unsigned_word(GPR[rt]) << (8*bp) tmp_rs_lo = unsigned_word(GPR[rs]) >> (8*(4-bp)) tmp = tmp_rt_hi || tmp_rt_lo GPR[rd] = sign_extend.32(tmp) Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: add SIGRIE instructionYongbok Kim2015-10-301-1/+11
| | | | | | | | | | | Add SIGRIE (Signal Reserved Instruction Exception) for both MIPS and microMIPS. The instruction allows to use the 16-bit code field for software use. This instruction is introduced by and required as of Release 6. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: add PC, XNP reg numbers to RDHWRYongbok Kim2015-10-301-3/+25
| | | | | | | | | | Add Performance Counter (4) and XNP (5) register numbers to RDHWR. Add check_hwrena() to simplify access control checkings. Add RDHWR support to microMIPS R6. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: Add enum for BREAK32Yongbok Kim2015-10-291-1/+2
| | | | | | | | | Add enum for BREAK32 Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-*: Advance pc after recognizing a breakpointRichard Henderson2015-10-281-2/+4
| | | | | | | | Some targets already had this within their logic, but make sure it's present for all targets. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
* tcg: Remove gen_intermediate_code_pcRichard Henderson2015-10-071-43/+5Star
| | | | | | | | | | It is no longer used, so tidy up everything reached by it. This includes the gen_opc_* arrays, the search_pc parameter and the inline gen_intermediate_code_internal functions. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
* tcg: Pass data argument to restore_state_to_opcRichard Henderson2015-10-071-4/+5
| | | | | | | | | | The gen_opc_* arrays are already redundant with the data stored in the insn_start arguments. Transition restore_state_to_opc to use data from the latter. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
* tcg: Add TCG_MAX_INSNSRichard Henderson2015-10-071-1/+6
| | | | | | | | Adjust all translators to respect it. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
* target-mips: Add delayed branch state to insn_startRichard Henderson2015-10-071-1/+2
| | | | | | Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
* target-*: Introduce and use cpu_breakpoint_testRichard Henderson2015-10-071-15/+10Star
| | | | | | | | | | | | Reduce the boilerplate required for each target. At the same time, move the test for breakpoint after calling tcg_gen_insn_start. Note that arm and aarch64 do not use cpu_breakpoint_test, but still move the inline test down after tcg_gen_insn_start. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
* target-*: Increment num_insns immediately after tcg_gen_insn_startRichard Henderson2015-10-071-3/+2Star
| | | | | | | | This does tidy the icount test common to all targets. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
* target-*: Unconditionally emit tcg_gen_insn_startRichard Henderson2015-10-071-5/+4Star
| | | | | | | | | | While we're at it, emit the opcode adjacent to where we currently record data for search_pc. This puts gen_io_start et al on the "correct" side of the marker. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
* tcg: Rename debug_insn_start to insn_startRichard Henderson2015-10-071-1/+1
| | | | | | | | With an eye toward making it mandatory. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
* target-mips: improve exception handlingPavel Dovgaluk2015-09-181-191/+174Star
| | | | | | | | | | | | | | | | | | This patch improves exception handling in MIPS. Instructions generate several types of exceptions. When exception is generated, it breaks the execution of the current translation block. Implementation of the exceptions handling does not correctly restore icount for the instruction which caused the exception. In most cases icount will be decreased by the value equal to the size of TB. This patch passes pointer to the translation block internals to the exception handler. It allows correct restoring of the icount value. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> [leon.alrae@imgtec.com: avoid retranslation in linux-user SC, break lines which are over 80 chars, remove v3 changelog from the commit message] Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: correct MTC0 instruction on MIPS64Leon Alrae2015-09-181-11/+7Star
| | | | | | | | MTC0 on a 64-bit processor should move entire 64-bit GPR content to CP0 register. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
* target-mips: add missing restriction in DAUI instructionLeon Alrae2015-09-181-1/+3
| | | | | | | | rs cannot be the zero register, Reserved Instruction exception must be signalled for this case. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
* target-mips: get rid of MIPS_DEBUG_SIGN_EXTENSIONSAurelien Jarno2015-09-181-39/+0Star
| | | | | | | | | | | MIPS_DEBUG_SIGN_EXTENSIONS was used sometimes ago to verify that 32-bit instructions correctly sign extend their results. It's now not need anymore, remove it. Cc: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: get rid of MIPS_DEBUGAurelien Jarno2015-09-181-605/+19Star
| | | | | | | | | | | | | MIPS_DEBUG is a define used to dump the instruction disassembling. It has to be defined at compile time. In practice I believe it's more efficient to just look at the instruction disassembly and op dump using -d in_asm,op. This patch therefore removes the corresponding code, which clutters translate.c. Cc: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: remove wrong checks for recip.fmt and rsqrt.fmtPetar Jovanovic2015-09-181-4/+2Star
| | | | | | | | | | Instructions recip.{s|d} and rsqrt.{s|d} do not require 64-bit FPU neither they require any particular mode for its FPU. This patch removes the checks that may break a program that uses these instructions. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: Use tcg_gen_extrh_i64_i32Richard Henderson2015-09-181-26/+22Star
| | | | | | | | | We can tidy gen_load_fpr32h, as well as introduce a helper to cleanup the MACC instructions. Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* tcg: Remove tcg_gen_trunc_i64_i32Richard Henderson2015-08-241-2/+2
| | | | | | Replacing it with tcg_gen_extrl_i64_i32. Signed-off-by: Richard Henderson <rth@twiddle.net>
* target-mips: simplify LWL/LDL mask generationAurelien Jarno2015-08-131-8/+6Star
| | | | | | | | | | | | | | | | | | | | The LWL/LDL instructions mask the GPR with a mask depending on the address alignement. It is currently computed by doing: mask = 0x7fffffffffffffffull >> (t1 ^ 63) It's simpler to generate it by doing: mask = ~(-1 << t1) It uses one TCG instruction less, and it avoids a 32/64-bit constant loading which can take a few instructions on RISC hosts. Cc: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: Copy restrictions from ext/ins to dext/dinsRichard Henderson2015-08-041-20/+25
| | | | | | | | | | | | | | The checks in dins is required to avoid triggering an assertion in tcg_gen_deposit_tl. The check in dext is just for completeness. Fold the other D cases in via fallthru. In this case the errant dins appears to be data, not code, as translation failed to stop after a break insn. Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: fix semihosting for microMIPS R6Leon Alrae2015-08-041-3/+7
| | | | | | | | | In semihosting mode the SDBBP 1 instructions should trigger UHI syscall, but in QEMU this does not happen for recently added microMIPS R6. Consequently bare metal microMIPS R6 programs supporting UHI will not run. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
* target-mips: fix page fault address for LWL/LWR/LDL/LDRAurelien Jarno2015-07-151-0/+12
| | | | | | | | | | | | | | | | When a LWL, LWR, LDL or LDR instruction triggers a page fault, QEMU currently reports the aligned address in CP0 BadVAddr, while the Windows NT kernel expects the unaligned address. This patch adds a byte access with the unaligned address at the beginning of the LWL/LWR/LDL/LDR instructions to possibly trigger a page fault and fill the QEMU TLB. Cc: Leon Alrae <leon.alrae@imgtec.com> Reported-by: Hervé Poussineau <hpoussin@reactos.org> Tested-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: fix logically dead code reported by CoverityLeon Alrae2015-07-151-0/+3
| | | | | | | Make use of CMPOP in floating-point compare instructions. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
* target-mips: microMIPS32 R6 POOL16{A, C} instructionsYongbok Kim2015-06-261-15/+118
| | | | | | | | | microMIPS32 Release 6 POOL16A/ POOL16C instructions Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: microMIPS32 R6 Major instructionsYongbok Kim2015-06-261-17/+45
| | | | | | | | Add new microMIPS32 Release 6 Major opcode instructions Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: microMIPS32 R6 POOL32{I, C} instructionsYongbok Kim2015-06-261-6/+21
| | | | | | | | | Add new microMIPS32 Release 6 POOL32I/POOL32C type instructions Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: microMIPS32 R6 POOL32F instructionsYongbok Kim2015-06-261-32/+199
| | | | | | | | | Add new microMIPS32 Release 6 POOL32F instructions Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: microMIPS32 R6 POOL32A{XF} instructionsYongbok Kim2015-06-261-10/+72
| | | | | | | | | Add new microMIPS32 Release 6 pool32a/pool32axf instructions. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: microMIPS32 R6 branches and jumpsYongbok Kim2015-06-261-40/+202
| | | | | | | | | Add new microMIPS32 Release 6 branch and jump instructions. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: add microMIPS32 R6 opcode enumYongbok Kim2015-06-261-16/+103
| | | | | | | | | Add microMIPS32 Release 6 opcode enum. Remove RI checking for pre-R6 reserved opcode. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: signal RI for removed instructions in microMIPS R6Yongbok Kim2015-06-261-0/+68
| | | | | | | | | | Signal a Reserved Instruction exception for removed instruction encoding in microMIPS Release 6. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: raise RI exceptions when FIR.PS = 0Yongbok Kim2015-06-261-33/+45
| | | | | | | | | | | | | | | 64-bit paired-single (PS) floating point data type is optional in the pre-Release 6. It has to raise RI exception when PS type is not implemented. (FIR.PS = 0) (The PS data type is removed in the Release 6.) Loongson-2E and Loongson-2F don't have any implementation field in FCSR0(FIR) but do support PS data format, therefore for these cores RI will not be signalled regardless of PS bit. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: rearrange gen_compute_compact_branchYongbok Kim2015-06-261-236/+236
| | | | | | | | | The function will be also used for microMIPS Release 6. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: refactor {D}LSA, {D}ALIGN, {D}BITSWAPYongbok Kim2015-06-261-67/+99
| | | | | | | | | | | Refactor those instructions in order to reuse them for microMIPS32 Release 6. Rearrange gen_move_low32(). Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: remove an unused argumentYongbok Kim2015-06-261-3/+2Star
| | | | | | | | | Remove an unused argument from decode_micromips32_opc() Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: add microMIPS TLBINV, TLBINVFYongbok Kim2015-06-261-0/+8
| | | | | | | | | Add microMIPS TLBINV, TLBINVF Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: fix {RD, WR}PGPR in microMIPSYongbok Kim2015-06-261-2/+2
| | | | | | | | | rt, rs were swapped Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* target-mips: add Unified Hosting Interface (UHI) supportLeon Alrae2015-06-261-20/+55
| | | | | | | | | | | | | Add UHI semihosting support for MIPS. QEMU run with "-semihosting" option will alter the behaviour of SDBBP 1 instruction -- UHI operation will be called instead of generating a debug exception. Also tweak Malta's pseudo-bootloader. On CPU reset the $4 register is set to -1 if semihosting arguments are passed to indicate that the UHI operations should be used to obtain input arguments. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
* target-mips: remove identical code in different branchLeon Alrae2015-06-261-21/+4Star
| | | | | Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
* disas: Remove uses of CPU envPeter Crosthwaite2015-06-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | disas does not need to access the CPU env for any reason. Change the APIs to accept CPU pointers instead. Small change pattern needs to be applied to all target translate.c. This brings us closer to making disas.o a common-obj and less architecture specific in general. Cc: Richard Henderson <rth@twiddle.net> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Michael Walle <michael@walle.cc> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Jia Liu <proljc@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
* target-mips: add MTHC0 and MFHC0 instructionsLeon Alrae2015-06-121-0/+226
| | | | | | | | | | | | | | Implement MTHC0 and MFHC0 instructions. In MIPS32 they are used to access upper word of extended to 64-bits CP0 registers. In MIPS64, when CP0 destination register specified is the EntryLo0 or EntryLo1, bits 1:0 of the GPR appear at bits 31:30 of EntryLo0 or EntryLo1. This is to compensate for RI and XI, which were shifted to bits 63:62 by MTC0 to EntryLo0 or EntryLo1. Therefore creating separate functions for EntryLo0 and EntryLo1. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
* target-mips: add CP0.PageGrain.ELPA supportLeon Alrae2015-06-121-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | CP0.PageGrain.ELPA enables support for large physical addresses. This field is encoded as follows: 0: Large physical address support is disabled. 1: Large physical address support is enabled. If this bit is a 1, the following changes occur to coprocessor 0 registers: - The PFNX field of the EntryLo0 and EntryLo1 registers is writable and concatenated with the PFN field to form the full page frame number. - Access to optional COP0 registers with PA extension, LLAddr, TagLo is defined. P5600 can operate in 32-bit or 40-bit Physical Address Mode. Therefore if XPA is disabled (CP0.PageGrain.ELPA = 0) then assume 32-bit Address Mode. In MIPS64 assume 36 as default PABITS (when CP0.PageGrain.ELPA = 0). env->PABITS value is constant and indicates maximum PABITS available on a core, whereas env->PAMask is calculated from env->PABITS and is also affected by CP0.PageGrain.ELPA. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2025-01-27 06:48:11 +0100