summaryrefslogtreecommitdiffstats
path: root/target/s390x
Commit message (Collapse)AuthorAgeFilesLines
* target/s390x: Use tcg_gen_gvec_dup_immRichard Henderson2020-05-061-33/+8Star
| | | | | | | | | | | | The gen_gvec_dupi switch is unnecessary with the new function. Replace it with a local gen_gvec_dup_imm that takes care of the register to offset conversion and length arguments. Drop zero_vec and use use gen_gvec_dup_imm with 0. Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* s390x: Add unpack facility feature to GA1Christian Borntraeger2020-04-292-0/+9
| | | | | | | | | | | | | | | | | | | | | | The unpack facility is an indication that diagnose 308 subcodes 8-10 are available to the guest. That means, that the guest can put itself into protected mode. Once it is in protected mode, the hardware stops any attempt of VM introspection by the hypervisor. Some features are currently not supported in protected mode: * vfio devices * Migration * Huge page backings Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200319131921.2367-17-frankja@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* s390x: protvirt: Handle SIGP store status correctlyJanosch Frank2020-04-291-0/+6
| | | | | | | | | | | | | For protected VMs status storing is not done by QEMU anymore. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200319131921.2367-15-frankja@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* s390x: protvirt: Move IO control structures over SIDAJanosch Frank2020-04-291-16/+45
| | | | | | | | | | | For protected guests, we need to put the IO emulation results into the SIDA, so SIE will write them into the guest at the next entry. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200319131921.2367-14-frankja@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* s390x: protvirt: Disable address checks for PV guest IO emulationJanosch Frank2020-04-291-7/+28
| | | | | | | | | | | | | | | | | IO instruction data is routed through SIDAD for protected guests, so adresses do not need to be checked, as this is kernel memory which is always available. Also the instruction data always starts at offset 0 of the SIDAD. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200319131921.2367-13-frankja@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* s390x: protvirt: Move diag 308 data over SIDAJanosch Frank2020-04-291-5/+20
| | | | | | | | | | | | | For protected guests the IPIB is written/read to/from the SIDA, so we need those accesses to go through s390_cpu_pv_mem_read/write(). Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200319131921.2367-12-frankja@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* s390x: protvirt: Set guest IPL PSWJanosch Frank2020-04-291-9/+17
| | | | | | | | | | | | | | | Handling of CPU reset and setting of the IPL psw from guest storage at offset 0 is done by a Ultravisor call. Let's only fetch it if necessary. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200319131921.2367-11-frankja@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* s390x: protvirt: SCLP interpretationJanosch Frank2020-04-291-5/+20
| | | | | | | | | | | | | | | | | | SCLP for a protected guest is done over the SIDAD, so we need to use the s390_cpu_pv_mem_* functions to access the SIDAD instead of guest memory when reading/writing SCBs. To not confuse the sclp emulation, we set 0x4000 as the SCCB address, since the function that injects the sclp external interrupt would reject a zero sccb address. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20200319131921.2367-10-frankja@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* s390x: protvirt: Move STSI data over SIDADJanosch Frank2020-04-291-2/+9
| | | | | | | | | | | | For protected guests, we need to put the STSI emulation results into the SIDA, so SIE will write them into the guest at the next entry. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200319131921.2367-9-frankja@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* s390x: Add SIDA memory opsJanosch Frank2020-04-294-1/+48
| | | | | | | | | | | | | | | | | | Protected guests save the instruction control blocks in the SIDA instead of QEMU/KVM directly accessing the guest's memory. Let's introduce new functions to access the SIDA. The memops for doing so are available with KVM_CAP_S390_PROTECTED, so let's check for that. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200319131921.2367-8-frankja@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* s390x: protvirt: KVM intercept changesJanosch Frank2020-04-291-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Protected VMs no longer intercept with code 4 for an instruction interception. Instead they have codes 104 and 108 for protected instruction interception and protected instruction notification respectively. The 104 mirrors the 4 interception. The 108 is a notification interception to let KVM and QEMU know that something changed and we need to update tracking information or perform specific tasks. It's currently taken for the following instructions: * spx (To inform about the changed prefix location) * sclp (On incorrect SCCB values, so we can inject a IRQ) * sigp (All but "stop and store status") * diag308 (Subcodes 0/1) Of these exits only sclp errors, state changing sigps and diag308 will reach QEMU. QEMU will do its parts of the job, while the ultravisor has done the instruction part of the job. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200319131921.2367-7-frankja@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* s390x: protvirt: Support unpack facilityJanosch Frank2020-04-296-2/+50
| | | | | | | | | | | | | | | | | | | | | | | | | The unpack facility provides the means to setup a protected guest. A protected guest cannot be introspected by the hypervisor or any user/administrator of the machine it is running on. Protected guests are encrypted at rest and need a special boot mechanism via diag308 subcode 8 and 10. Code 8 sets the PV specific IPLB which is retained separately from those set via code 5. Code 10 is used to unpack the VM into protected memory, verify its integrity and start it. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Co-developed-by: Christian Borntraeger <borntraeger@de.ibm.com> [Changes to machine] Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200323083606.24520-1-frankja@linux.ibm.com> [CH: fixed up KVM_PV_VM_ -> KVM_PV_] Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* s390x: Move diagnose 308 subcodes and rcs into ipl.hJanosch Frank2020-04-281-11/+0Star
| | | | | | | | | | | | They are part of the IPL process, so let's put them into the ipl header. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20200319131921.2367-2-frankja@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* s390x: kvm: Fix number of cpu reports for stsi 3.2.2Janosch Frank2020-04-021-1/+16
| | | | | | | | | | | | | | | | | The cpu number reporting is handled by KVM and QEMU only fills in the VM name, uuid and other values. Unfortunately KVM doesn't report reserved cpus and doesn't even know they exist until the are created via the ioctl. So let's fix up the cpu values after KVM has written its values to the 3.2.2 sysib. To be consistent, we use the same code to retrieve the cpu numbers as the STSI TCG code in target/s390x/misc_helper.c:HELPER(stsi). Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20200331110123.3774-1-frankja@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* Merge remote-tracking branch ↵Peter Maydell2020-03-192-4/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging x86 and machine queue for 5.0 soft freeze Bug fixes: * memory encryption: Disable mem merge (Dr. David Alan Gilbert) Features: * New EPYC CPU definitions (Babu Moger) * Denventon-v2 CPU model (Tao Xu) * New 'note' field on versioned CPU models (Tao Xu) Cleanups: * x86 CPU topology cleanups (Babu Moger) * cpu: Use DeviceClass reset instead of a special CPUClass reset (Peter Maydell) # gpg: Signature made Wed 18 Mar 2020 01:16:43 GMT # gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6 # gpg: issuer "ehabkost@redhat.com" # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/x86-and-machine-pull-request: hw/i386: Rename apicid_from_topo_ids to x86_apicid_from_topo_ids hw/i386: Update structures to save the number of nodes per package hw/i386: Remove unnecessary initialization in x86_cpu_new machine: Add SMP Sockets in CpuTopology hw/i386: Consolidate topology functions hw/i386: Introduce X86CPUTopoInfo to contain topology info cpu: Use DeviceClass reset instead of a special CPUClass reset machine/memory encryption: Disable mem merge hw/i386: Rename X86CPUTopoInfo structure to X86CPUTopoIDs i386: Add 2nd Generation AMD EPYC processors i386: Add missing cpu feature bits in EPYC model target/i386: Add new property note to versioned CPU models target/i386: Add Denverton-v2 (no MPX) CPU model Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * cpu: Use DeviceClass reset instead of a special CPUClass resetPeter Maydell2020-03-182-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CPUClass has a 'reset' method. This is a legacy from when TYPE_CPU used not to inherit from TYPE_DEVICE. We don't need it any more, as we can simply use the TYPE_DEVICE reset. The 'cpu_reset()' function is kept as the API which most places use to reset a CPU; it is now a wrapper which calls device_cold_reset() and then the tracepoint function. This change should not cause CPU objects to be reset more often than they are at the moment, because: * nobody is directly calling device_cold_reset() or qdev_reset_all() on CPU objects * no CPU object is on a qbus, so they will not be reset either by somebody calling qbus_reset_all()/bus_cold_reset(), or by the main "reset sysbus and everything in the qbus tree" reset that most devices are reset by Note that this does not change the need for each machine or whatever to use qemu_register_reset() to arrange to call cpu_reset() -- that is necessary because CPU objects are not on any qbus, so they don't get reset when the qbus tree rooted at the sysbus bus is reset, and this isn't being changed here. All the changes to the files under target/ were made using the included Coccinelle script, except: (1) the deletion of the now-inaccurate and not terribly useful "CPUClass::reset" comments was done with a perl one-liner afterwards: perl -n -i -e '/ CPUClass::reset/ or print' target/*/*.c (2) this bit of the s390 change was done by hand, because the Coccinelle script is not sophisticated enough to handle the parent_reset call being inside another function: | @@ -96,8 +96,9 @@ static void s390_cpu_reset(CPUState *s, cpu_reset_type type) | S390CPU *cpu = S390_CPU(s); | S390CPUClass *scc = S390_CPU_GET_CLASS(cpu); | CPUS390XState *env = &cpu->env; |+ DeviceState *dev = DEVICE(s); | |- scc->parent_reset(s); |+ scc->parent_reset(dev); | cpu->env.sigp_order = 0; | s390_cpu_set_state(S390_CPU_STATE_STOPPED, cpu); Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200303100511.5498-1-peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* | Merge remote-tracking branch ↵Peter Maydell2020-03-182-16/+16
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/stsquad/tags/pull-testing-and-gdbstub-170320-1' into staging Testing and gdbstub updates: - docker updates for VirGL - re-factor gdbstub for static GDBState - re-factor gdbstub for dynamic arrays - add SVE support to arm gdbstub - add some guest debug tests to check-tcg - add aarch64 userspace register tests - remove packet size limit to gdbstub - simplify gdbstub monitor code - report vContSupported in gdbstub to use proper single-step # gpg: Signature made Tue 17 Mar 2020 17:47:46 GMT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-testing-and-gdbstub-170320-1: (28 commits) gdbstub: Fix single-step issue by confirming 'vContSupported+' feature to gdb gdbstub: do not split gdb_monitor_write payload gdbstub: change GDBState.last_packet to GByteArray tests/tcg/aarch64: add test-sve-ioctl guest-debug test tests/tcg/aarch64: add SVE iotcl test tests/tcg/aarch64: add a gdbstub testcase for SVE registers tests/guest-debug: add a simple test runner configure: allow user to specify what gdb to use tests/tcg/aarch64: userspace system register test target/arm: don't bother with id_aa64pfr0_read for USER_ONLY target/arm: generate xml description of our SVE registers target/arm: default SVE length to 64 bytes for linux-user target/arm: explicitly encode regnum in our XML target/arm: prepare for multiple dynamic XMLs gdbstub: extend GByteArray to read register helpers target/i386: use gdb_get_reg helpers target/m68k: use gdb_get_reg helpers target/arm: use gdb_get_reg helpers gdbstub: add helper for 128 bit registers gdbstub: move mem_buf to GDBState and use GByteArray ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * gdbstub: extend GByteArray to read register helpersAlex Bennée2020-03-172-16/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of passing a pointer to memory now just extend the GByteArray to all the read register helpers. They can then safely append their data through the normal way. We don't bother with this abstraction for write registers as we have already ensured the buffer being copied from is the correct size. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Message-Id: <20200316172155.971-15-alex.bennee@linaro.org>
* | misc: Replace zero-length arrays with flexible array member (manual)Philippe Mathieu-Daudé2020-03-161-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Description copied from Linux kernel commit from Gustavo A. R. Silva (see [3]): --v-- description start --v-- The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member [1], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being unadvertenly introduced [2] to the Linux codebase from now on. --^-- description end --^-- Do the similar housekeeping in the QEMU codebase (which uses C99 since commit 7be41675f7cb). All these instances of code were found with the help of the following command (then manual analysis, without modifying structures only having a single flexible array member, such QEDTable in block/qed.h): git grep -F '[0];' [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=76497732932f [3] https://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux.git/commit/?id=17642a2fbd2c1 Inspired-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* s390x: ipl: Consolidate iplb validity check into one functionJanosch Frank2020-03-101-1/+1
| | | | | | | | | | | It's nicer to just call one function than calling a function for each possible iplb type. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20200310090950.61172-1-frankja@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
* s390x: Rename and use constants for short PSW address and maskJanosch Frank2020-02-272-3/+4
| | | | | | | | | | | | | | | Let's rename PSW_MASK_ESA_ADDR to PSW_MASK_SHORT_ADDR because we're not working with a ESA PSW which would not support the extended addressing bit. Also let's actually use it. Additionally we introduce PSW_MASK_SHORT_CTRL and use it throughout the codebase. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20200227092341.38558-1-frankja@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* s390/sclp: improve special wait psw logicChristian Borntraeger2020-02-261-1/+1
| | | | | | | | | | | | | There is a special quiesce PSW that we check for "shutdown". Otherwise disabled wait is detected as "crashed". Architecturally we must only check PSW bits 116-127. Fix this. Cc: qemu-stable@nongnu.org Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <1582204582-22995-1-git-send-email-borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* s390x: Add missing vcpu reset functionsJanosch Frank2020-02-264-12/+58
| | | | | | | | | | | | | | | | Up to now we only had an ioctl to reset vcpu data QEMU couldn't reach for the initial reset, which was also called for the clear reset. To be architecture compliant, we also need to clear local interrupts on a normal reset. Because of this and the upcoming protvirt support we need to add ioctls for the missing clear and normal resets. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Message-Id: <20200214151636.8764-3-frankja@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* target/s390x/translate: Fix RNSBG instructionThomas Huth2020-02-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | RNSBG is handled via the op_rosbg() helper function. But RNSBG has the opcode 0xEC54, i.e. 0x54 as second byte, while op_rosbg() currently checks for 0x55. This seems to be a typo, fix it to use 0x54 instead, so that op_rosbg() does not abort() anymore if a program uses RNSBG. I've checked with a simple test function that I now get the same results with KVM and with TCG: static void test_rnsbg(void) { uint64_t r1, r2; r2 = 0xffff000000000000UL; r1 = 0x123456789bdfaaaaUL; asm volatile (" rnsbg %0,%1,12,61,16 " : "+r"(r1) : "r"(r2)); printf("r1 afterwards: 0x%lx\n", r1); } Buglink: https://bugs.launchpad.net/qemu/+bug/1860920 Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20200130133417.10531-1-thuth@redhat.com> Fixes: d6c6372e186e ("target-s390: Implement R[NOX]SBG") Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* Let cpu_[physical]_memory() calls pass a boolean 'is_write' argumentPhilippe Mathieu-Daudé2020-02-202-4/+4
| | | | | | | | | Use an explicit boolean type. This commit was produced with the included Coccinelle script scripts/coccinelle/exec_rw_const. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* Remove unnecessary cast when using the address_space APIPhilippe Mathieu-Daudé2020-02-201-1/+1
| | | | | | | | | | | This commit was produced with the included Coccinelle script scripts/coccinelle/exec_rw_const. Two lines in hw/net/dp8393x.c that Coccinelle produced that were over 80 characters were re-wrapped by hand. Suggested-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* s390x: sigp: Fix sense running reportingJanosch Frank2020-01-271-2/+2
| | | | | | | | | | | The logic was inverted and reported running if the cpu was stopped. Let's fix that. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Fixes: d1b468bc8869 ("s390x/tcg: implement SIGP SENSE RUNNING STATUS") Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20200124134818.9981-1-frankja@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* target/s390x: Remove DisasFields argument from extract_insnRichard Henderson2020-01-271-11/+8Star
| | | | | | | | | The separate pointer is now redundant. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200123232248.1800-6-richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* target/s390x: Move DisasFields into DisasContextRichard Henderson2020-01-272-32/+30Star
| | | | | | | | | | | | | | | | | | I believe that the separate allocation of DisasFields from DisasContext was meant to limit the places from which we could access fields. But that plan did not go unchanged, and since DisasContext contains a pointer to fields, the substructure is accessible everywhere. By allocating the substructure with DisasContext, we improve the locality of the accesses by avoiding one level of pointer chasing. In addition, we avoid a dangling pointer to stack allocated memory, diagnosed by static checkers. Launchpad: https://bugs.launchpad.net/bugs/1661815 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200123232248.1800-5-richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* target/s390x: Pass DisasContext to get_field and have_fieldRichard Henderson2020-01-272-574/+569Star
| | | | | | | | | All callers pass s->fields, so we might as well pass s directly. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200123232248.1800-4-richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* target/s390x: Remove DisasFields argument from callbacksRichard Henderson2020-01-271-207/+210
| | | | | | | | | | The DisasFields data is available from DisasContext. We do not need to pass a separate argument. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200123232248.1800-3-richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* target/s390x: Move struct DisasFields definition earlierRichard Henderson2020-01-271-81/+83
| | | | | | | | | We will want to include the struct in DisasContext. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200123232248.1800-2-richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* target/s390x/kvm: Enable adapter interruption suppression againThomas Huth2020-01-271-3/+6
| | | | | | | | | | | | | | | The AIS feature has been disabled late in the v2.10 development cycle since there were some issues with migration (see commit 3f2d07b3b01ea61126b - "s390x/ais: for 2.10 stable: disable ais facility"). We originally wanted to enable it again for newer machine types, but apparently we forgot to do this so far. Let's do it now for the machines that support proper CPU models. Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1756946 Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20200122101437.5069-1-thuth@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* target/s390x: Remove duplicated ifdef macroPhilippe Mathieu-Daudé2020-01-271-4/+3Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | Commit ae71ed8610 replaced the use of global max_cpus variable with a machine property, but introduced a unnecessary ifdef, as this block is already in the 'not CONFIG_USER_ONLY' branch part: 86 #if defined(CONFIG_USER_ONLY) 87 ... 106 #else /* !CONFIG_USER_ONLY */ 107 ... 292 static void do_ext_interrupt(CPUS390XState *env) 293 { ... 313 #ifndef CONFIG_USER_ONLY 314 MachineState *ms = MACHINE(qdev_get_machine()); 315 unsigned int max_cpus = ms->smp.max_cpus; 316 #endif To ease code review, remove the duplicated preprocessor macro, and move the declarations at the beginning of the statement. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200121110349.25842-6-philmd@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* qdev: set properties with device_class_set_props()Marc-André Lureau2020-01-241-1/+1
| | | | | | | | | | | | | | | | | | | | | The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* cpu: Use cpu_class_set_parent_reset()Greg Kurz2020-01-241-2/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | Convert all targets to use cpu_class_set_parent_reset() with the following coccinelle script: @@ type CPUParentClass; CPUParentClass *pcc; CPUClass *cc; identifier parent_fn; identifier child_fn; @@ +cpu_class_set_parent_reset(cc, child_fn, &pcc->parent_fn); -pcc->parent_fn = cc->reset; ... -cc->reset = child_fn; Signed-off-by: Greg Kurz <groug@kaod.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Message-Id: <157650847817.354886.7047137349018460524.stgit@bahia.lan> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* tcg: Search includes from the project root source directoryPhilippe Mathieu-Daudé2020-01-162-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We currently search both the root and the tcg/ directories for tcg files: $ git grep '#include "tcg/' | wc -l 28 $ git grep '#include "tcg[^/]' | wc -l 94 To simplify the preprocessor search path, unify by expliciting the tcg/ directory. Patch created mechanically by running: $ for x in \ tcg.h tcg-mo.h tcg-op.h tcg-opc.h \ tcg-op-gvec.h tcg-gvec-desc.h; do \ sed -i "s,#include \"$x\",#include \"tcg/$x\"," \ $(git grep -l "#include \"$x\""); \ done Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts) Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200101112303.20724-2-philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* target/s390x: Use cpu_*_mmuidx_ra instead of MMU_MODE*_SUFFIXRichard Henderson2020-01-162-10/+5Star
| | | | | | | | | | | | | The generated functions aside from *_real are unused. The *_real functions have a couple of users in mem_helper.c; use *_mmuidx_ra instead, with MMU_REAL_IDX. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> --- v2: Use *_mmuidx_ra directly, without intermediate macros.
* target/s390x: Include tcg.h in mem_helper.cRichard Henderson2020-01-161-0/+1
| | | | | | | | | | Code movement in an upcoming patch will show that this file was implicitly depending on tcg.h being included indirectly. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20191219' into stagingPeter Maydell2019-12-207-61/+34Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | More s390x patches: - tcg: implement LOAD/STORE TO REAL ADDRESS inline - fixes in tests, the bios, and diag308 handling # gpg: Signature made Thu 19 Dec 2019 10:53:19 GMT # gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF # gpg: issuer "cohuck@redhat.com" # gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown] # gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full] # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full] # gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown] # gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown] # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck/tags/s390x-20191219: s390x: Properly fetch and test the short psw on diag308 subc 0/1 pc-bios/s390: Update firmware images pc-bios/s390x: Fix reset psw mask tests/boot-sector: Fix the bad s390x assembler code target/s390x: Implement LOAD/STORE TO REAL ADDRESS inline target/s390x: Split out helper_per_store_real Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * s390x: Properly fetch and test the short psw on diag308 subc 0/1Janosch Frank2019-12-182-2/+11
| | | | | | | | | | | | | | | | | | | | | | We need to actually fetch the cpu mask and set it. As we invert the short psw indication in the mask, SIE will report a specification exception, if it wasn't present in the reset psw. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20191129142025.21453-2-frankja@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
| * target/s390x: Implement LOAD/STORE TO REAL ADDRESS inlineRichard Henderson2019-12-184-47/+8Star
| | | | | | | | | | | | | | | | | | | | | | | | These are trivially done by performing a memory operation with the correct mmu_idx. The only tricky part is using get_address directly in order to get the address wrapped; we cannot use la2 because of the format. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20191211203614.15611-3-richard.henderson@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
| * target/s390x: Split out helper_per_store_realRichard Henderson2019-12-184-16/+19
| | | | | | | | | | | | | | | | | | | | | | Split the PER handling for store-to-real-address into its own helper function, conditionally called when PER is enabled, just as we do for per_branch and per_ifetch. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20191211203614.15611-2-richard.henderson@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* | kvm: introduce kvm_kernel_irqchip_* functionsPaolo Bonzini2019-12-171-1/+1
| | | | | | | | | | | | | | | | The KVMState struct is opaque, so provide accessors for the fields that will be moved from current_machine to the accelerator. For now they just forward to the machine object, but this will change. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* | qom: add object_new_with_classPaolo Bonzini2019-12-171-2/+2
|/ | | | | | | | | | Similar to CPU and machine classes, "-accel" class names are mangled, so we have to first get a class via accel_find and then instantiate it. Provide a new function to instantiate a class without going through object_class_get_name, and use it for CPUs and machines already. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* s390x/tcg: clear local interrupts on reset normalCornelia Huck2019-12-141-4/+4
| | | | | | | | | We neglected to clean up pending interrupts and emergency signals; fix that. Message-Id: <20191206135404.16051-1-cohuck@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com>
* s390x/cpumodel: Fix query-cpu-definitions error API violationsMarkus Armbruster2019-12-141-5/+1Star
| | | | | | | | | | | | | | | | | | | | qmp_query_cpu_definitions() passes @errp to get_max_cpu_model(), then frees any error it gets back. This effectively ignores errors. Dereferencing @errp is wrong; see the big comment in error.h. Passing @errp is also wrong, because it works only as long as @errp is neither @error_fatal nor @error_abort. Introduced in commit 38cba1f4d8 "s390x: return unavailable features via query-cpu-definitions". No caller actually passes such @errp values. Fix anyway: simply pass NULL to get_max_cpu_model(). Cc: David Hildenbrand <david@redhat.com> Cc: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20191204093625.14836-16-armbru@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* s390x/cpumodel: Fix query-cpu-model-FOO error API violationsMarkus Armbruster2019-12-141-16/+27
| | | | | | | | | | | | | | | | | | | | | | | | | cpu_model_from_info() is a helper for qmp_query_cpu_model_expansion(), qmp_query_cpu_model_comparison(), qmp_query_cpu_model_baseline(). It dereferences @errp when the visitor or the QOM setter fails. That's wrong; see the big comment in error.h. Introduced in commit 137974cea3 's390x/cpumodel: implement QMP interface "query-cpu-model-expansion"'. Its three callers have the same issue. Introduced in commit 4e82ef0502 's390x/cpumodel: implement QMP interface "query-cpu-model-comparison"' and commit f1a47d08ef 's390x/cpumodel: implement QMP interface "query-cpu-model-baseline"'. No caller actually passes null. Fix anyway: splice in a local Error *err, and error_propagate(). Cc: David Hildenbrand <david@redhat.com> Cc: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20191204093625.14836-15-armbru@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* s390x/cpumodel: Fix realize() error API violationsMarkus Armbruster2019-12-141-15/+22
| | | | | | | | | | | | | | | | | | | | | get_max_cpu_model() dereferences @errp when kvm_s390_get_host_cpu_model() fails, apply_cpu_model() dereferences it when kvm_s390_apply_cpu_model() fails, and s390_realize_cpu_model() dereferences it when get_max_cpu_model() or check_compatibility() fail. That's wrong; see the big comment in error.h. All three introduced in commit 80560137cf "s390x/cpumodel: check and apply the CPU model". No caller actually passes null. Fix anyway: splice in a local Error *err, and error_propagate(). Cc: David Hildenbrand <david@redhat.com> Cc: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20191204093625.14836-14-armbru@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* s390x/cpumodel: Fix feature property error API violationsMarkus Armbruster2019-12-141-4/+8
| | | | | | | | | | | | | | | | | | s390x-cpu property setters set_feature() and set_feature_group() dereference @errp when the visitor fails. That's wrong; see the big comment in error.h. Introduced in commit 0754f60429 "s390x/cpumodel: expose features and feature groups as properties". No caller actually passes null. Fix anyway: splice in a local Error *err, and error_propagate(). Cc: David Hildenbrand <david@redhat.com> Cc: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20191204093625.14836-13-armbru@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2025-02-01 18:05:23 +0100