summaryrefslogtreecommitdiffstats
path: root/util/qemu-sockets.c
Commit message (Collapse)AuthorAgeFilesLines
* sockets: ensure we don't accept IPv4 clients when IPv4 is disabledDaniel P. Berrange2017-07-141-9/+31
| | | | | | | | | | | | | | | | | | | | | | | | Currently if you disable listening on IPv4 addresses, via the CLI flag ipv4=off, we still mistakenly accept IPv4 clients via the IPv6 listener socket due to IPV6_V6ONLY flag being unset. We must ensure IPV6_V6ONLY is always set if ipv4=off This fixes the following scenarios -incoming tcp::9000,ipv6=on -incoming tcp:[::]:9000,ipv6=on -chardev socket,id=cdev0,host=,port=9000,server,nowait,ipv4=off -chardev socket,id=cdev0,host=,port=9000,server,nowait,ipv6=on -chardev socket,id=cdev0,host=::,port=9000,server,nowait,ipv4=off -chardev socket,id=cdev0,host=::,port=9000,server,nowait,ipv6=on which all mistakenly accepted IPv4 clients Acked-by: Gerd Hoffmann <kraxel@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
* sockets: don't block IPv4 clients when listening on "::"Daniel P. Berrange2017-07-141-4/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When inet_parse() parses the hostname, it is forcing the has_ipv6 && ipv6 flags if the address contains a ":". This means that if the user had set the ipv4=on flag, to try to restrict the listener to just ipv4, an error would not have been raised. eg -incoming tcp:[::]:9000,ipv4 should have raised an error because listening for IPv4 on "::" is a non-sensical combination. With this removed, we now call getaddrinfo() on "::" passing PF_INET and so getaddrinfo reports an error about the hostname being incompatible with the requested protocol: qemu-system-x86_64: -incoming tcp:[::]:9000,ipv4: address resolution failed for :::9000: Address family for hostname not supported Likewise it is explicitly setting the has_ipv4 & ipv4 flags when the address contains only digits + '.'. This has no ill-effect, but also has no benefit, so is removed. Acked-by: Gerd Hoffmann <kraxel@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
* sockets: ensure we can bind to both ipv4 & ipv6 separatelyDaniel P. Berrange2017-07-141-8/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When binding to an IPv6 socket we currently force the IPV6_V6ONLY flag to off. This means that the IPv6 socket will accept both IPv4 & IPv6 sockets when QEMU is launched with something like -vnc :::1 While this is good for that case, it is bad for other cases. For example if an empty hostname is given, getaddrinfo resolves it to 2 addresses 0.0.0.0 and ::, in that order. We will thus bind to 0.0.0.0 first, and then fail to bind to :: on the same port. The same problem can happen if any other hostname lookup causes the IPv4 address to be reported before the IPv6 address. When we get an IPv6 bind failure, we should re-try the same port, but with IPV6_V6ONLY turned on again, to avoid clash with any IPv4 listener. This ensures that -vnc :1 will bind successfully to both 0.0.0.0 and ::, and also avoid -vnc :1,to=2 from mistakenly using a 2nd port for the :: listener. This is a regression due to commit 396f935 "ui: add ability to specify multiple VNC listen addresses". Acked-by: Gerd Hoffmann <kraxel@gmail.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
* util/qemu-sockets: Drop unused helper socket_address_to_string()Mao Zhongyi2017-07-111-34/+0Star
| | | | | | Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* sockets: avoid formatting buffer that may not be NUL terminatedDaniel P. Berrange2017-07-041-1/+1
| | | | | | | | | | | | | | | | | | | The 'sun_path' field in the sockaddr_un struct is not required to be NUL termianted, so when reporting an error, we must use the separate 'path' variable which is guaranteed terminated. Fixes a bug spotted by coverity that was introduced in commit ad9579aaa16d5b385922d49edac2c96c79bcfb62 Author: Daniel P. Berrange <berrange@redhat.com> Date: Thu May 25 16:53:00 2017 +0100 sockets: improve error reporting if UNIX socket path is too long Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20170626103756.22974-1-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* sockets: improve error reporting if UNIX socket path is too longDaniel P. Berrange2017-06-071-22/+46
| | | | | | | | | | | | | | | | | | | | | | | | The 'struct sockaddr_un' only allows 108 bytes for the socket path. If the user supplies a path, QEMU uses snprintf() to silently truncate it when too long. This is undesirable because the user will then be unable to connect to the path they asked for. If the user doesn't supply a path, QEMU builds one based on TMPDIR, but if that leads to an overlong path, it mistakenly uses error_setg_errno() with a stale errno value, because snprintf() does not set errno on truncation. In solving this the code needed some refactoring to ensure we don't pass 'un.sun_path' directly to any APIs which expect NUL-terminated strings, because the path is not required to be terminated. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20170525155300.22743-1-berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* sockets: Plug memory leak in socket_address_flatten()Markus Armbruster2017-05-231-1/+3
| | | | | | | | | | | socket_address_flatten() leaks a SocketAddress when its argument is null. Happens when opening a ChardevBackend of type 'udp' that is configured without a local address. Screwed up in commit bd269ebc due to last minute semantic conflict resolution. Spotted by Coverity. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1494866344-11013-1-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
* sockets: Delete unused helper socket_address_crumple()Markus Armbruster2017-05-091-31/+0Star
| | | | | | | Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1493192202-3184-8-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [Commit message typo fixed]
* sockets: Limit SocketAddressLegacy to external interfacesMarkus Armbruster2017-05-091-75/+105
| | | | | | | | | | | | | | | | | SocketAddressLegacy is a simple union, and simple unions are awkward: they have their variant members wrapped in a "data" object on the wire, and require additional indirections in C. SocketAddress is the equivalent flat union. Convert all users of SocketAddressLegacy to SocketAddress, except for existing external interfaces. See also commit fce5d53..9445673 and 85a82e8..c5f1ae3. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1493192202-3184-7-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [Minor editing accident fixed, commit message and a comment tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
* sockets: Rename SocketAddressFlat to SocketAddressMarkus Armbruster2017-05-091-5/+5
| | | | | | | Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1493192202-3184-6-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
* sockets: Rename SocketAddress to SocketAddressLegacyMarkus Armbruster2017-05-091-50/+50
| | | | | | | | | | | | | | | The next commit will rename SocketAddressFlat to SocketAddress, and the commit after that will replace most uses of SocketAddressLegacy by SocketAddress, replacing most of this commit's renames right back. Note that checkpatch emits a few "line over 80 characters" warnings. The long lines are all temporary; the SocketAddressLegacy replacement will shorten them again. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1493192202-3184-5-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
* sockets: Prepare inet_parse() for flattened SocketAddressMarkus Armbruster2017-05-091-18/+12Star
| | | | | | | | | | | | | | | I'm going to flatten SocketAddress: rename SocketAddress to SocketAddressLegacy, SocketAddressFlat to SocketAddress, eliminate SocketAddressLegacy except in external interfaces. inet_parse() returns a newly allocated InetSocketAddress. Lift the allocation from inet_parse() into its caller socket_parse() to prepare for flattening SocketAddress. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1493192202-3184-3-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [Straightforward rebase]
* sockets: Prepare vsock_parse() for flattened SocketAddressMarkus Armbruster2017-05-091-10/+10
| | | | | | | | | | | | | | I'm going to flatten SocketAddress: rename SocketAddress to SocketAddressLegacy, SocketAddressFlat to SocketAddress, eliminate SocketAddressLegacy except in external interfaces. vsock_parse() returns a newly allocated VsockSocketAddress. Lift the allocation from vsock_parse() into its caller socket_parse() to prepare for flattening SocketAddress. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1493192202-3184-2-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
* socket: Make errp the last parameter of vsock_connect_saddrFam Zheng2017-04-241-5/+6
| | | | | | | | Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170421122710.15373-5-famz@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
* socket: Make errp the last parameter of unix_connect_saddrFam Zheng2017-04-241-6/+8
| | | | | | | | Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170421122710.15373-4-famz@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
* socket: Make errp the last parameter of inet_connect_saddrFam Zheng2017-04-241-4/+5
| | | | | | | | Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170421122710.15373-3-famz@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
* socket: Make errp the last parameter of socket_connectFam Zheng2017-04-241-2/+2
| | | | | | | | Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170421122710.15373-2-famz@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
* sockets: New helper socket_address_crumple()Markus Armbruster2017-04-031-0/+32
| | | | | | | | | | | | | | SocketAddress is a simple union, and simple unions are awkward: they have their variant members wrapped in a "data" object on the wire, and require additional indirections in C. I intend to limit its use to existing external interfaces. New ones should use SocketAddressFlat. I further intend to convert all internal interfaces to SocketAddressFlat. This helper should go away then. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-id: 1490895797-29094-8-git-send-email-armbru@redhat.com Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
* io vnc sockets: Clean up SocketAddressKind switchesMarkus Armbruster2017-04-031-3/+1Star
| | | | | | | | | | | | | | | | | | We have quite a few switches over SocketAddressKind. Some have case labels for all enumeration values, others rely on a default label. Some abort when the value isn't a valid SocketAddressKind, others report an error then. Unify as follows. Always provide case labels for all enumeration values, to clarify intent. Abort when the value isn't a valid SocketAddressKind, because the program state is messed up then. Improve a few error messages while there. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1490895797-29094-4-git-send-email-armbru@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
* nbd sockets vnc: Mark problematic address family tests TODOMarkus Armbruster2017-04-031-0/+4
| | | | | | | | | | | | | | | | | | | | Certain features make sense only with certain address families. For instance, passing file descriptors requires AF_UNIX. Testing SocketAddress's saddr->type == SOCKET_ADDRESS_KIND_UNIX is obvious, but problematic: it can't recognize AF_UNIX when type == SOCKET_ADDRESS_KIND_FD. Mark such tests of saddr->type TODO. We may want to check the address family with getsockname() there. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1490895797-29094-2-git-send-email-armbru@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
* sockets: Fix socket_address_to_string() hostname truncationMarkus Armbruster2017-03-281-7/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | | We first snprintf() to a fixed buffer, then g_strdup() the result *boggle*. Worse, the size of the fixed buffer INET6_ADDRSTRLEN + 5 + 4 is bogus: the 4 correctly accounts for '[', ']', ':' and '\0', but INET6_ADDRSTRLEN is not a suitable limit for inet->host, and 5 is not one for inet->port! They are for host and port in *numeric* form (exploiting that INET6_ADDRSTRLEN > INET_ADDRSTRLEN), but inet->host can also be a hostname, and inet->port can be a service name, to be resolved with getaddrinfo(). Fortunately, the only user so far is the "socket" network backend's net_socket_connected(), which uses it to initialize a NetSocketState's info_str[]. info_str[] has considerable more space: 256 instead of 55. So the bug's impact appears to be limited to truncated "info networks" with the "socket" network backend. The fix is obvious: use g_strdup_printf(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1490268208-23368-1-git-send-email-armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
* io: introduce a DNS resolver APIDaniel P. Berrange2017-01-231-2/+2
| | | | | | | | | | | | | | | | | Currently DNS resolution is done automatically as part of the creation of a QIOChannelSocket object instance. This works ok for network clients where you just end up a single network socket, but for servers, the results of DNS resolution may require creation of multiple sockets. Introducing a DNS resolver API allows DNS resolution to be separated from the socket object creation. This will make it practical to create multiple QIOChannelSocket instances for servers. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
* sockets: add ability to disable DNS resolution for InetSocketAddressDaniel P. Berrange2017-01-231-0/+7
| | | | | | | | | | | Add a 'numeric' flag to the InetSocketAddress struct to allow the caller to indicate that DNS should be skipped for the host/port fields. This is useful if the caller knows the address is already numeric and wants to guarantee no (potentially blocking) DNS lookups are attempted. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
* sockets: add AF_VSOCK supportStefan Hajnoczi2016-11-011-0/+227
| | | | | | | | | | | | | | | | | | | Add the AF_VSOCK address family so that qemu-ga will be able to use virtio-vsock. The AF_VSOCK address family uses <cid, port> address tuples. The cid is the unique identifier comparable to an IP address. AF_VSOCK does not use name resolution so it's easy to convert between struct sockaddr_vm and strings. This patch defines a VsockSocketAddress instead of trying to piggy-back on InetSocketAddress. This is cleaner in the long run since it avoids lots of IPv4 vs IPv6 vs vsock special casing. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> * treat trailing commas as garbage when parsing (Eric Blake) * add configure check instead of checking AF_VSOCK directly Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
* util/qemu-sockets: Make inet_connect_saddr() publicAshijeet Acharya2016-10-311-2/+2
| | | | | | | | | | Make inet_connect_saddr() in util/qemu-sockets.c public in order to be able to use it with InetSocketAddress sockets outside of util/qemu-sockets.c independently. Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qapi: rename *qmp-*-visitor* to *qobject-*-visitor*Daniel P. Berrange2016-10-251-2/+2
| | | | | | | | | | | | | | | | | | The QMP visitors have no direct dependency on QMP. It is valid to use them anywhere that one has a QObject. Rename them to better reflect their functionality as a generic QObject to QAPI converter. This is the first of three parts: rename the files. The next two parts will rename C identifiers. The split is necessary to make git rename detection work. Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Split into file and identifier rename, two comments touched up] Signed-off-by: Markus Armbruster <armbru@redhat.com>
* util: fix some coding style issueCao jin2016-09-131-5/+11
| | | | | | | | | | | | | Fix some coding style issues found in removing NonBlockingConnectHandler. Cc: Daniel P. Berrange <berrange@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Reviwed-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Message-Id: <1469696074-12744-3-git-send-email-caoj.fnst@cn.fujitsu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* util/qemu-sockets: revert Yoda Conditions to normalCao jin2016-09-131-5/+5
| | | | | | | | | | | | Follow CODING_STYLE Cc: Daniel P. Berrange <berrange@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Message-Id: <1469703004-14800-1-git-send-email-caoj.fnst@cn.fujitsu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* util: Drop inet_listen()Cao jin2016-08-021-28/+0Star
| | | | | | | | | | | | | | Since commit e65c67e4, inet_listen() is not used anymore, and all inet listen operation goes through QIOChannel. Cc: Daniel P. Berrange <berrange@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Eric Blake <eblake@redhat.com> Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Message-Id: <1469451771-1173-3-git-send-email-caoj.fnst@cn.fujitsu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* util: drop unix_nonblocking_connect()Cao jin2016-08-021-16/+0Star
| | | | | | | | | | | | It is never used; all nonblocking connect now goes through socket_connect(), which calls unix_connect_addr(). Cc: Daniel P. Berrange <berrange@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Message-Id: <1469097213-26441-3-git-send-email-caoj.fnst@cn.fujitsu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* util: drop inet_nonblocking_connect()Cao jin2016-08-021-30/+0Star
| | | | | | | | | | | | It is never used; all nonblocking connect now goes through socket_connect(), which calls inet_connect_addr(). Cc: Daniel P. Berrange <berrange@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Message-Id: <1469097213-26441-2-git-send-email-caoj.fnst@cn.fujitsu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qemu-sockets: use qapi_free_SocketAddress in cleanupMarc-André Lureau2016-07-121-1/+1
| | | | | | | | | Commit 74b6ce43e3 uses the wrong free API for a SocketAddress, that may leak some linked data. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20160706164246.22116-1-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* sockets: Use new QAPI cloningEric Blake2016-07-061-23/+0Star
| | | | | | | | | | Rather than rolling our own clone via an expensive conversion in and back out of QObject, use the new clone visitor. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-15-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
* qapi: Add new visit_complete() functionEric Blake2016-07-061-4/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Making each output visitor provide its own output collection function was the only remaining reason for exposing visitor sub-types to the rest of the code base. Add a polymorphic visit_complete() function which is a no-op for input visitors, and which populates an opaque pointer for output visitors. For maximum type-safety, also add a parameter to the output visitor constructors with a type-correct version of the output pointer, and assert that the two uses match. This approach was considered superior to either passing the output parameter only during construction (action at a distance during visit_free() feels awkward) or only during visit_complete() (defeating type safety makes it easier to use incorrectly). Most callers were function-local, and therefore a mechanical conversion; the testsuite was a bit trickier, but the previous cleanup patch minimized the churn here. The visit_complete() function may be called at most once; doing so lets us use transfer semantics rather than duplication or ref-count semantics to get the just-built output back to the caller, even though it means our behavior is not idempotent. Generated code is simplified as follows for events: |@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP | QDict *qmp; | Error *err = NULL; | QMPEventFuncEmit emit; |- QmpOutputVisitor *qov; |+ QObject *obj; | Visitor *v; | q_obj_ACPI_DEVICE_OST_arg param = { | info |@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP | | qmp = qmp_event_build_dict("ACPI_DEVICE_OST"); | |- qov = qmp_output_visitor_new(); |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(&obj); | | visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err); | if (err) { |@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | |- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov)); |+ visit_complete(v, &obj); |+ qdict_put_obj(qmp, "data", obj); | emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err); and for commands: | { | Error *err = NULL; |- QmpOutputVisitor *qov = qmp_output_visitor_new(); | Visitor *v; | |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(ret_out); | visit_type_AddfdInfo(v, "unused", &ret_in, &err); |- if (err) { |- goto out; |+ if (!err) { |+ visit_complete(v, ret_out); | } |- *ret_out = qmp_output_get_qobject(qov); |- |-out: | error_propagate(errp, err); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
* qmp-output-visitor: Favor new visit_free() functionEric Blake2016-07-061-1/+1
| | | | | | | | | | | Now that we have a polymorphic visit_free(), we no longer need qmp_output_visitor_cleanup(); however, we still need to expose the subtype for qmp_output_get_qobject(). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-10-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
* qmp-input-visitor: Favor new visit_free() functionEric Blake2016-07-061-4/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we have a polymorphic visit_free(), we no longer need qmp_input_visitor_cleanup(); which in turn means we no longer need to return a subtype from qmp_input_visitor_new() nor a public upcast function. Generated code changes to qmp-marshal.c look like: |@@ -52,11 +52,10 @@ void qmp_marshal_add_fd(QDict *args, QOb | { | Error *err = NULL; | AddfdInfo *retval; |- QmpInputVisitor *qiv = qmp_input_visitor_new(QOBJECT(args), true); | Visitor *v; | q_obj_add_fd_arg arg = {0}; | |- v = qmp_input_get_visitor(qiv); |+ v = qmp_input_visitor_new(QOBJECT(args), true); | visit_start_struct(v, NULL, NULL, 0, &err); | if (err) { | goto out; Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-8-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
* Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell2016-06-291-0/+18
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * serial port fixes (Paolo) * Q35 modeling improvements (Paolo, Vasily) * chardev cleanup improvements (Marc-André) * iscsi bugfix (Peter L.) * cpu_exec patch from multi-arch patches (Peter C.) * pci-assign tweak (Lin Ma) # gpg: Signature made Wed 29 Jun 2016 15:56:30 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (35 commits) socket: unlink unix socket on remove socket: add listen feature char: clean up remaining chardevs when leaving vhost-user: disable chardev handlers on close vhost-user-test: fix g_cond_wait_until compat implementation vl: smp_parse: fix regression ich9: implement SCI_IRQ_SEL register ich9: implement ACPI_EN register serial: reinstate watch after migration serial: remove watch on reset char: change qemu_chr_fe_add_watch to return unsigned serial: separate serial_xmit and serial_watch_cb serial: simplify tsr_retry reset serial: make tsr_retry unsigned iscsi: fix assertion in is_sector_request_lun_aligned target-*: Don't redefine cpu_exec() pci-assign: Move "Invalid ROM" error message to pci-assign-load-rom.c vnc: generalize "VNC server running on ..." message scsi: esp: fix migration MC146818 RTC: add GPIO access to output IRQ ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * socket: unlink unix socket on removeMarc-André Lureau2016-06-291-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | qemu leaves unix socket files behind when removing a listening chardev or leaving. qemu could clean that up, even if doing so isn't race-free. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1347077 Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1466105332-10285-4-git-send-email-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* | Change net/socket.c to use socket_*() functionsAshijeet Acharya2016-06-281-0/+36
|/ | | | | | | | | | | | | | Use socket_*() functions from include/qemu/sockets.h instead of listen()/bind()/connect()/parse_host_port(). socket_*() fucntions are QAPI based and this patch performs this api conversion since everything will be using QAPI based sockets in the future. Also add a helper function socket_address_to_string() in util/qemu-sockets.c which returns the string representation of socket address. Thetask was listed on http://wiki.qemu.org/BiteSizedTasks page. Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
* util: fix comment typosWei Jiangang2016-05-181-1/+1
| | | | | | Signed-off-by: Wei Jiangang <weijg.fnst@cn.fujitsu.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* qapi: Use strict QMP input visitor in more placesEric Blake2016-05-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following uses of a QMP input visitor should be strict (that is, excess keys in QDict input should be flagged if not converted to QAPI): - Testsuite code unrelated to explicitly testing non-strict mode (test-qmp-commands, test-visitor-serialization); since we want more code to be strict by default, having more tests of strict mode doesn't hurt - Code used for cloning QAPI objects (replay-input.c, qemu-sockets.c); we are reparsing a QObject just barely produced by the qmp output visitor and which therefore should not have any garbage, so while it is extra work to be strict, it validates that our clone is correct [note that a later patch series will simplify these two uses by creating an actual clone visitor that is much more efficient than a generate/reparse cycle] - qmp_object_add(), which calls into user_creatable_add_type(). Since command line parsing for '-object' uses the same user_creatable_add_type() through the OptsVisitor, and that is always strict, we want to ensure that any nested dictionaries would be treated the same in QMP and from the command line (I don't actually know if such nested dictionaries exist). Note that on this code change, strictness only matters for nested dictionaries (if even possible), since we already flag excess input at the top level during an earlier object_property_set() on an unknown key, whether from QemuOpts: $ ./x86_64-softmmu/qemu-system-x86_64 -nographic -nodefaults -qmp stdio -object secret,id=sec0,data=letmein,format=raw,foo=bar qemu-system-x86_64: -object secret,id=sec0,data=letmein,format=raw,foo=bar: Property '.foo' not found or from QMP: $ ./x86_64-softmmu/qemu-system-x86_64 -nographic -nodefaults -qmp stdio {"QMP": {"version": {"qemu": {"micro": 93, "minor": 5, "major": 2}, "package": ""}, "capabilities": []}} {"execute":"qmp_capabilities"} {"return": {}} {"execute":"object-add","arguments":{"qom-type":"secret","id":"sec0","props":{"format":"raw","data":"letmein","foo":"bar"}}} {"error": {"class": "GenericError", "desc": "Property '.foo' not found"}} The only remaining uses of non-strict input visits are: - QMP 'qom-set' (which eventually executes object_property_set_qobject()) - mark it as something to revisit in the future (I didn't want to spend any more time on this patch auditing if we have any QOM dictionary properties that might be impacted, and couldn't easily prove whether this code path is shared with anything else). - test-qmp-input-visitor: explicit tests of non-strict mode. If we later get rid of users that don't need strictness, then this test should be merged with test-qmp-input-strict Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1461879932-9020-7-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
* qapi: Consolidate QMP input visitor creationEric Blake2016-05-121-1/+1
| | | | | | | | | | | | | | Rather than having two separate ways to create a QMP input visitor, where the safer approach has the more verbose name, it is better to consolidate things into a single function where the caller must explicitly choose whether to be strict or to ignore excess input. This patch is the strictly mechanical conversion; the next patch will then audit which uses can be made stricter. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1461879932-9020-6-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
* util: retry getaddrinfo if getting EAI_BADFLAGS with AI_V4MAPPEDDaniel P. Berrange2016-04-051-1/+18
| | | | | | | | | | | | | | | | | | | | | | The FreeBSD header files define the AI_V4MAPPED but its implementation of getaddrinfo() always returns an error when that flag is set. eg address resolution failed for localhost:9000: Invalid value for ai_flags There are also reports of the same problem on OS-X 10.6 Since AI_V4MAPPED is not critical functionality, if we get an EAI_BADFLAGS error then just retry without the AI_V4MAPPED flag set. Use a static var to cache this status so we don't have to retry on every single call. Also remove its use from the test suite since it serves no useful purpose there. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1459786920-15961-1-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* util: move declarations out of qemu-common.hVeronia Bahaa2016-03-221-0/+1
| | | | | | | | | | Move declarations out of qemu-common.h for functions declared in utils/ files: e.g. include/qemu/path.h for utils/path.c. Move inline functions out of qemu-common.h and into new files (e.g. include/qemu/bcd.h) Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster2016-03-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qapi: Don't special-case simple union wrappersEric Blake2016-03-181-17/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
* osdep: remove use of socket_error() from all codeDaniel P. Berrange2016-03-101-5/+5
| | | | | | | | | | Now that QEMU wraps the Win32 sockets methods to automatically set errno upon failure, there is no reason for callers to use the socket_error() method. They can rely on accessing errno even on Win32. Remove all use of socket_error() from general code, leaving it as a static method in oslib-win32.c only. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
* util: Shorten references into SocketAddressEric Blake2016-03-051-5/+6
| | | | | | | | | | | | | | | An upcoming patch will alter how simple unions, like SocketAddress, are laid out, which will impact all lines of the form 'addr->u.XXX' (expanding it to the longer 'addr->u.XXX.data'). For better legibility in that patch, and less need for line wrapping, it's better to use a temporary variable to reduce the effect of a layout change to just the variable initializations, rather than every reference within a SocketAddress. Also, take advantage of some C99 initialization where it makes sense (simplifying g_new0() to g_new()). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1457021813-10704-7-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
* qemu-sockets: simplify error handlingPaolo Bonzini2016-02-111-3/+3
| | | | | | | | | | | Just go always through the err label. (Noticed because Coverity complains that peer is always non-NULL in the error cleanup code, but removing the "if" is arguably more prone to introducing the opposite bug in the future). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* qapi: Swap visit_* arguments for consistent 'name' placementEric Blake2016-02-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-12-22 19:13:09 +0100