From f153b563f8cf121aebf5a2fff5f0110faf58ccb3 Mon Sep 17 00:00:00 2001 From: Wolfgang Bumiller Date: Wed, 25 Jan 2017 14:48:57 +0100 Subject: cirrus: handle negative pitch in cirrus_invalidate_region() cirrus_invalidate_region() calls memory_region_set_dirty() on a per-line basis, always ranging from off_begin to off_begin+bytesperline. With a negative pitch off_begin marks the top most used address and thus we need to do an initial shift backwards by a line for negative pitches of backward blits, otherwise the first iteration covers the line going from the start offset forwards instead of backwards. Additionally since the start address is inclusive, if we shift by a full `bytesperline` we move to the first address *not* included in the blit, so we only shift by one less than bytesperline. Signed-off-by: Wolfgang Bumiller Message-id: 1485352137-29367-1-git-send-email-w.bumiller@proxmox.com [ kraxel: codestyle fixes ] Signed-off-by: Gerd Hoffmann --- hw/display/cirrus_vga.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/hw/display/cirrus_vga.c b/hw/display/cirrus_vga.c index 379910db2d..0f05e4596e 100644 --- a/hw/display/cirrus_vga.c +++ b/hw/display/cirrus_vga.c @@ -661,9 +661,14 @@ static void cirrus_invalidate_region(CirrusVGAState * s, int off_begin, int off_cur; int off_cur_end; + if (off_pitch < 0) { + off_begin -= bytesperline - 1; + } + for (y = 0; y < lines; y++) { off_cur = off_begin; off_cur_end = (off_cur + bytesperline) & s->cirrus_addr_mask; + assert(off_cur_end >= off_cur); memory_region_set_dirty(&s->vga.vram, off_cur, off_cur_end - off_cur); off_begin += off_pitch; } -- cgit v1.2.3-55-g7522 From 5858dd1801883309bdd208d72ddb81c4e9fee30c Mon Sep 17 00:00:00 2001 From: Wolfgang Bumiller Date: Tue, 24 Jan 2017 16:35:38 +0100 Subject: cirrus: allow zero source pitch in pattern fill rops The rops used by cirrus_bitblt_common_patterncopy only use the destination pitch, so the source pitch shoul allowed to be zero and the blit with used for the range check around the source address. Signed-off-by: Wolfgang Bumiller Message-id: 1485272138-23249-1-git-send-email-w.bumiller@proxmox.com Signed-off-by: Gerd Hoffmann --- hw/display/cirrus_vga.c | 27 +++++++++++++++++++-------- 1 file changed, 19 insertions(+), 8 deletions(-) diff --git a/hw/display/cirrus_vga.c b/hw/display/cirrus_vga.c index 0f05e4596e..98f089e4e9 100644 --- a/hw/display/cirrus_vga.c +++ b/hw/display/cirrus_vga.c @@ -272,9 +272,6 @@ static void cirrus_update_memory_access(CirrusVGAState *s); static bool blit_region_is_unsafe(struct CirrusVGAState *s, int32_t pitch, int32_t addr) { - if (!pitch) { - return true; - } if (pitch < 0) { int64_t min = addr + ((int64_t)s->cirrus_blt_height-1) * pitch; @@ -294,8 +291,11 @@ static bool blit_region_is_unsafe(struct CirrusVGAState *s, return false; } -static bool blit_is_unsafe(struct CirrusVGAState *s, bool dst_only) +static bool blit_is_unsafe(struct CirrusVGAState *s, bool dst_only, + bool zero_src_pitch_ok) { + int32_t check_pitch; + /* should be the case, see cirrus_bitblt_start */ assert(s->cirrus_blt_width > 0); assert(s->cirrus_blt_height > 0); @@ -304,6 +304,10 @@ static bool blit_is_unsafe(struct CirrusVGAState *s, bool dst_only) return true; } + if (!s->cirrus_blt_dstpitch) { + return true; + } + if (blit_region_is_unsafe(s, s->cirrus_blt_dstpitch, s->cirrus_blt_dstaddr & s->cirrus_addr_mask)) { return true; @@ -311,7 +315,13 @@ static bool blit_is_unsafe(struct CirrusVGAState *s, bool dst_only) if (dst_only) { return false; } - if (blit_region_is_unsafe(s, s->cirrus_blt_srcpitch, + + check_pitch = s->cirrus_blt_srcpitch; + if (!zero_src_pitch_ok && !check_pitch) { + check_pitch = s->cirrus_blt_width; + } + + if (blit_region_is_unsafe(s, check_pitch, s->cirrus_blt_srcaddr & s->cirrus_addr_mask)) { return true; } @@ -681,8 +691,9 @@ static int cirrus_bitblt_common_patterncopy(CirrusVGAState * s, dst = s->vga.vram_ptr + (s->cirrus_blt_dstaddr & s->cirrus_addr_mask); - if (blit_is_unsafe(s, false)) + if (blit_is_unsafe(s, false, true)) { return 0; + } (*s->cirrus_rop) (s, dst, src, s->cirrus_blt_dstpitch, 0, @@ -699,7 +710,7 @@ static int cirrus_bitblt_solidfill(CirrusVGAState *s, int blt_rop) { cirrus_fill_t rop_func; - if (blit_is_unsafe(s, true)) { + if (blit_is_unsafe(s, true, true)) { return 0; } rop_func = cirrus_fill[rop_to_index[blt_rop]][s->cirrus_blt_pixelwidth - 1]; @@ -803,7 +814,7 @@ static int cirrus_do_copy(CirrusVGAState *s, int dst, int src, int w, int h) static int cirrus_bitblt_videotovideo_copy(CirrusVGAState * s) { - if (blit_is_unsafe(s, false)) + if (blit_is_unsafe(s, false, false)) return 0; return cirrus_do_copy(s, s->cirrus_blt_dstaddr - s->vga.start_addr, -- cgit v1.2.3-55-g7522 From 60cd23e85151525ab26591394c4e7e06fa07d216 Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Wed, 25 Jan 2017 11:09:56 +0100 Subject: cirrus: fix blit address mask handling Apply the cirrus_addr_mask to cirrus_blt_dstaddr and cirrus_blt_srcaddr right after assigning them, in cirrus_bitblt_start(), instead of having this all over the place in the cirrus code, and missing a few places. Reported-by: Wolfgang Bumiller Signed-off-by: Gerd Hoffmann Message-id: 1485338996-17095-1-git-send-email-kraxel@redhat.com --- hw/display/cirrus_vga.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) diff --git a/hw/display/cirrus_vga.c b/hw/display/cirrus_vga.c index 98f089e4e9..7db6409dc5 100644 --- a/hw/display/cirrus_vga.c +++ b/hw/display/cirrus_vga.c @@ -309,7 +309,7 @@ static bool blit_is_unsafe(struct CirrusVGAState *s, bool dst_only, } if (blit_region_is_unsafe(s, s->cirrus_blt_dstpitch, - s->cirrus_blt_dstaddr & s->cirrus_addr_mask)) { + s->cirrus_blt_dstaddr)) { return true; } if (dst_only) { @@ -322,7 +322,7 @@ static bool blit_is_unsafe(struct CirrusVGAState *s, bool dst_only, } if (blit_region_is_unsafe(s, check_pitch, - s->cirrus_blt_srcaddr & s->cirrus_addr_mask)) { + s->cirrus_blt_srcaddr)) { return true; } @@ -689,7 +689,7 @@ static int cirrus_bitblt_common_patterncopy(CirrusVGAState * s, { uint8_t *dst; - dst = s->vga.vram_ptr + (s->cirrus_blt_dstaddr & s->cirrus_addr_mask); + dst = s->vga.vram_ptr + s->cirrus_blt_dstaddr; if (blit_is_unsafe(s, false, true)) { return 0; @@ -714,7 +714,7 @@ static int cirrus_bitblt_solidfill(CirrusVGAState *s, int blt_rop) return 0; } rop_func = cirrus_fill[rop_to_index[blt_rop]][s->cirrus_blt_pixelwidth - 1]; - rop_func(s, s->vga.vram_ptr + (s->cirrus_blt_dstaddr & s->cirrus_addr_mask), + rop_func(s, s->vga.vram_ptr + s->cirrus_blt_dstaddr, s->cirrus_blt_dstpitch, s->cirrus_blt_width, s->cirrus_blt_height); cirrus_invalidate_region(s, s->cirrus_blt_dstaddr, @@ -732,9 +732,8 @@ static int cirrus_bitblt_solidfill(CirrusVGAState *s, int blt_rop) static int cirrus_bitblt_videotovideo_patterncopy(CirrusVGAState * s) { - return cirrus_bitblt_common_patterncopy(s, - s->vga.vram_ptr + ((s->cirrus_blt_srcaddr & ~7) & - s->cirrus_addr_mask)); + return cirrus_bitblt_common_patterncopy(s, s->vga.vram_ptr + + (s->cirrus_blt_srcaddr & ~7)); } static int cirrus_do_copy(CirrusVGAState *s, int dst, int src, int w, int h) @@ -788,10 +787,8 @@ static int cirrus_do_copy(CirrusVGAState *s, int dst, int src, int w, int h) if (notify) graphic_hw_update(s->vga.con); - (*s->cirrus_rop) (s, s->vga.vram_ptr + - (s->cirrus_blt_dstaddr & s->cirrus_addr_mask), - s->vga.vram_ptr + - (s->cirrus_blt_srcaddr & s->cirrus_addr_mask), + (*s->cirrus_rop) (s, s->vga.vram_ptr + s->cirrus_blt_dstaddr, + s->vga.vram_ptr + s->cirrus_blt_srcaddr, s->cirrus_blt_dstpitch, s->cirrus_blt_srcpitch, s->cirrus_blt_width, s->cirrus_blt_height); @@ -842,8 +839,7 @@ static void cirrus_bitblt_cputovideo_next(CirrusVGAState * s) } else { /* at least one scan line */ do { - (*s->cirrus_rop)(s, s->vga.vram_ptr + - (s->cirrus_blt_dstaddr & s->cirrus_addr_mask), + (*s->cirrus_rop)(s, s->vga.vram_ptr + s->cirrus_blt_dstaddr, s->cirrus_bltbuf, 0, 0, s->cirrus_blt_width, 1); cirrus_invalidate_region(s, s->cirrus_blt_dstaddr, 0, s->cirrus_blt_width, 1); @@ -962,6 +958,9 @@ static void cirrus_bitblt_start(CirrusVGAState * s) s->cirrus_blt_modeext = s->vga.gr[0x33]; blt_rop = s->vga.gr[0x32]; + s->cirrus_blt_dstaddr &= s->cirrus_addr_mask; + s->cirrus_blt_srcaddr &= s->cirrus_addr_mask; + #ifdef DEBUG_BITBLT printf("rop=0x%02x mode=0x%02x modeext=0x%02x w=%d h=%d dpitch=%d spitch=%d daddr=0x%08x saddr=0x%08x writemask=0x%02x\n", blt_rop, -- cgit v1.2.3-55-g7522 From 62d4c6bd5263bb8413a06c80144fc678df6dfb64 Mon Sep 17 00:00:00 2001 From: Li Qiang Date: Wed, 1 Feb 2017 09:35:01 +0100 Subject: cirrus: fix oob access issue (CVE-2017-2615) When doing bitblt copy in backward mode, we should minus the blt width first just like the adding in the forward mode. This can avoid the oob access of the front of vga's vram. Signed-off-by: Li Qiang { kraxel: with backward blits (negative pitch) addr is the topmost address, so check it as-is against vram size ] Cc: qemu-stable@nongnu.org Cc: P J P Cc: Laszlo Ersek Cc: Paolo Bonzini Cc: Wolfgang Bumiller Fixes: d3532a0db02296e687711b8cdc7791924efccea0 (CVE-2014-8106) Signed-off-by: Gerd Hoffmann Message-id: 1485938101-26602-1-git-send-email-kraxel@redhat.com Reviewed-by: Laszlo Ersek --- hw/display/cirrus_vga.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/hw/display/cirrus_vga.c b/hw/display/cirrus_vga.c index 7db6409dc5..16f27e8ac5 100644 --- a/hw/display/cirrus_vga.c +++ b/hw/display/cirrus_vga.c @@ -274,10 +274,9 @@ static bool blit_region_is_unsafe(struct CirrusVGAState *s, { if (pitch < 0) { int64_t min = addr - + ((int64_t)s->cirrus_blt_height-1) * pitch; - int32_t max = addr - + s->cirrus_blt_width; - if (min < 0 || max > s->vga.vram_size) { + + ((int64_t)s->cirrus_blt_height - 1) * pitch + - s->cirrus_blt_width; + if (min < -1 || addr >= s->vga.vram_size) { return true; } } else { -- cgit v1.2.3-55-g7522