/* * PXA270-based Clamshell PDA platforms. * * Copyright (c) 2006 Openedhand Ltd. * Written by Andrzej Zaborowski * * This code is licensed under the GNU GPL v2. * * Contributions after 2012-01-13 are licensed under the terms of the * GNU GPL, version 2 or (at your option) any later version. */ #include "qemu/osdep.h" #include "qapi/error.h" #include "hw/arm/pxa.h" #include "hw/arm/boot.h" #include "sysemu/runstate.h" #include "sysemu/sysemu.h" #include "hw/pcmcia.h" #include "hw/qdev-properties.h" #include "hw/i2c/i2c.h" #include "hw/irq.h" #include "hw/ssi/ssi.h" #include "hw/block/flash.h" #include "qemu/timer.h" #include "hw/arm/sharpsl.h" #include "ui/console.h" #include "hw/audio/wm8750.h" #include "audio/audio.h" #include "hw/boards.h" #include "hw/sysbus.h" #include "hw/misc/max111x.h" #include "migration/vmstate.h" #include "exec/address-spaces.h" #include "cpu.h" enum spitz_model_e { spitz, akita, borzoi, terrier }; typedef struct { MachineClass parent; enum spitz_model_e model; int arm_id; } SpitzMachineClass; typedef struct { MachineState parent; PXA2xxState *mpu; DeviceState *mux; DeviceState *lcdtg; DeviceState *ads7846; DeviceState *max1111; DeviceState *scp0; DeviceState *scp1; DeviceState *misc_gpio; } SpitzMachineState; #define TYPE_SPITZ_MACHINE "spitz-common" #define SPITZ_MACHINE(obj) \ OBJECT_CHECK(SpitzMachineState, obj, TYPE_SPITZ_MACHINE) #define SPITZ_MACHINE_GET_CLASS(obj) \ OBJECT_GET_CLASS(SpitzMachineClass, obj, TYPE_SPITZ_MACHINE) #define SPITZ_MACHINE_CLASS(klass) \ OBJECT_CLASS_CHECK(SpitzMachineClass, klass, TYPE_SPITZ_MACHINE) #undef REG_FMT #define REG_FMT "0x%02lx" /* Spitz Flash */ #define FLASH_BASE 0x0c000000 #define FLASH_ECCLPLB 0x00 /* Line parity 7 - 0 bit */ #define FLASH_ECCLPUB 0x04 /* Line parity 15 - 8 bit */ #define FLASH_ECCCP 0x08 /* Column parity 5 - 0 bit */ #define FLASH_ECCCNTR 0x0c /* ECC byte counter */ #define FLASH_ECCCLRR 0x10 /* Clear ECC */ #define FLASH_FLASHIO 0x14 /* Flash I/O */ #define FLASH_FLASHCTL 0x18 /* Flash Control */ #define FLASHCTL_CE0 (1 << 0) #define FLASHCTL_CLE (1 << 1) #define FLASHCTL_ALE (1 << 2) #define FLASHCTL_WP (1 << 3) #define FLASHCTL_CE1 (1 << 4) #define FLASHCTL_RYBY (1 << 5) #define FLASHCTL_NCE (FLASHCTL_CE0 | FLASHCTL_CE1) #define TYPE_SL_NAND "sl-nand" #define SL_NAND(obj) OBJECT_CHECK(SLNANDState, (obj), TYPE_SL_NAND) typedef struct { SysBusDevice parent_obj; MemoryRegion iomem; DeviceState *nand; uint8_t ctl; uint8_t manf_id; uint8_t chip_id; ECCState ecc; } SLNANDState; static uint64_t sl_read(void *opaque, hwaddr addr, unsigned size) { SLNANDState *s = (SLNANDState *) opaque; int ryby; switch (addr) { #define BSHR(byte, from, to) ((s->ecc.lp[byte] >> (from - to)) & (1 << to)) case FLASH_ECCLPLB: return BSHR(0, 4, 0) | BSHR(0, 5, 2) | BSHR(0, 6, 4) | BSHR(0, 7, 6) | BSHR(1, 4, 1) | BSHR(1, 5, 3) | BSHR(1, 6, 5) | BSHR(1, 7, 7); #define BSHL(byte, from, to) ((s->ecc.lp[byte] << (to - from)) & (1 << to)) case FLASH_ECCLPUB: return BSHL(0, 0, 0) | BSHL(0, 1, 2) | BSHL(0, 2, 4) | BSHL(0, 3, 6) | BSHL(1, 0, 1) | BSHL(1, 1, 3) | BSHL(1, 2, 5) | BSHL(1, 3, 7); case FLASH_ECCCP: return s->ecc.cp; case FLASH_ECCCNTR: return s->ecc.count & 0xff; case FLASH_FLASHCTL: nand_getpins(s->nand, &ryby); if (ryby) return s->ctl | FLASHCTL_RYBY; else return s->ctl; case FLASH_FLASHIO: if (size == 4) { return ecc_digest(&s->ecc, nand_getio(s->nand)) | (ecc_digest(&s->ecc, nand_getio(s->nand)) << 16); } return ecc_digest(&s->ecc, nand_getio(s->nand)); default: zaurus_printf("Bad register offset " REG_FMT "\n", (unsigned long)addr); } return 0; } static void sl_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { SLNANDState *s = (SLNANDState *) opaque; switch (addr) { case FLASH_ECCCLRR: /* Value is ignored. */ ecc_reset(&s->ecc); break; case FLASH_FLASHCTL: s->ctl = value & 0xff & ~FLASHCTL_RYBY; nand_setpins(s->nand, s->ctl & FLASHCTL_CLE, s->ctl & FLASHCTL_ALE, s->ctl & FLASHCTL_NCE, s->ctl & FLASHCTL_WP, 0); break; case FLASH_FLASHIO: nand_setio(s->nand, ecc_digest(&s->ecc, value & 0xff)); break; default: zaurus_printf("Bad register offset " REG_FMT "\n", (unsigned long)addr); } } enum { FLASH_128M, FLASH_1024M, }; static const MemoryRegionOps sl_ops = { .read = sl_read, .write = sl_write, .endianness = DEVICE_NATIVE_ENDIAN, }; static void sl_flash_register(PXA2xxState *cpu, int size) { DeviceState *dev; dev = qdev_new(TYPE_SL_NAND); qdev_prop_set_uint8(dev, "manf_id", NAND_MFR_SAMSUNG); if (size == FLASH_128M) qdev_prop_set_uint8(dev, "chip_id", 0x73); else if (size == FLASH_1024M) qdev_prop_set_uint8(dev, "chip_id", 0xf1); sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, FLASH_BASE); } static void sl_nand_init(Object *obj) { SLNANDState *s = SL_NAND(obj); SysBusDevice *dev = SYS_BUS_DEVICE(obj); s->ctl = 0; memory_region_init_io(&s->iomem, obj, &sl_ops, s, "sl", 0x40); sysbus_init_mmio(dev, &s->iomem); } static void sl_nand_realize(DeviceState *dev, Error **errp) { SLNANDState *s = SL_NAND(dev); DriveInfo *nand; /* FIXME use a qdev drive property instead of drive_get() */ nand = drive_get(IF_MTD, 0, 0); s->nand = nand_init(nand ? blk_by_legacy_dinfo(nand) : NULL, s->manf_id, s->chip_id); } /* Spitz Keyboard */ #define SPITZ_KEY_STROBE_NUM 11 #define SPITZ_KEY_SENSE_NUM 7 static const int spitz_gpio_key_sense[SPITZ_KEY_SENSE_NUM] = { 12, 17, 91, 34, 36, 38, 39 }; static const int spitz_gpio_key_strobe[SPITZ_KEY_STROBE_NUM] = { 88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114 }; /* Eighth additional row maps the special keys */ static int spitz_keymap[SPITZ_KEY_SENSE_NUM + 1][SPITZ_KEY_STROBE_NUM] = { { 0x1d, 0x02, 0x04, 0x06, 0x07, 0x08, 0x0a, 0x0b, 0x0e, 0x3f, 0x40 }, { -1 , 0x03, 0x05, 0x13, 0x15, 0x09, 0x17, 0x18, 0x19, 0x41, 0x42 }, { 0x0f, 0x10, 0x12, 0x14, 0x22, 0x16, 0x24, 0x25, -1 , -1 , -1 }, { 0x3c, 0x11, 0x1f, 0x21, 0x2f, 0x23, 0x32, 0x26, -1 , 0x36, -1 }, { 0x3b, 0x1e, 0x20, 0x2e, 0x30, 0x31, 0x34, -1 , 0x1c, 0x2a, -1 }, { 0x44, 0x2c, 0x2d, 0x0c, 0x39, 0x33, -1 , 0x48, -1 , -1 , 0x38 }, { 0x37, 0x3d, -1 , 0x45, 0x57, 0x58, 0x4b, 0x50, 0x4d, -1 , -1 }, { 0x52, 0x43, 0x01, 0x47, 0x49, -1 , -1 , -1 , -1 , -1 , -1 }, }; #define SPITZ_GPIO_AK_INT 13 /* Remote control */ #define SPITZ_GPIO_SYNC 16 /* Sync button */ #define SPITZ_GPIO_ON_KEY 95 /* Power button */ #define SPITZ_GPIO_SWA 97 /* Lid */ #define SPITZ_GPIO_SWB 96 /* Tablet mode */ /* The special buttons are mapped to unused keys */ static const int spitz_gpiomap[5] = { SPITZ_GPIO_AK_INT, SPITZ_GPIO_SYNC, SPITZ_GPIO_ON_KEY, SPITZ_GPIO_SWA, SPITZ_GPIO_SWB, }; #define TYPE_SPITZ_KEYBOARD "spitz-keyboard" #define SPITZ_KEYBOARD(obj) \ OBJECT_CHECK(SpitzKeyboardState, (obj), TYPE_SPITZ_KEYBOARD) typedef struct { SysBusDevice parent_obj; qemu_irq sense[SPITZ_KEY_SENSE_NUM]; qemu_irq gpiomap[5]; int keymap[0x80]; uint16_t keyrow[SPITZ_KEY_SENSE_NUM]; uint16_t strobe_state; uint16_t sense_state; uint16_t pre_map[0x100]; uint16_t modifiers; uint16_t imodifiers; uint8_t fifo[16]; int fifopos, fifolen; QEMUTimer *kbdtimer; } SpitzKeyboardState; static void spitz_keyboard_sense_update(SpitzKeyboardState *s) { int i; uint16_t strobe, sense = 0; for (i = 0; i < SPITZ_KEY_SENSE_NUM; i ++) { strobe = s->keyrow[i] & s->strobe_state; if (strobe) { sense |= 1 << i; if (!(s->sense_state & (1 << i))) qemu_irq_raise(s->sense[i]); } else if (s->sense_state & (1 << i)) qemu_irq_lower(s->sense[i]); } s->sense_state = sense; } static void spitz_keyboard_strobe(void *opaque, int line, int level) { SpitzKeyboardState *s = (SpitzKeyboardState *) opaque; if (level) s->strobe_state |= 1 << line; else s->strobe_state &= ~(1 << line); spitz_keyboard_sense_update(s); } static void spitz_keyboard_keydown(SpitzKeyboardState *s, int keycode) { int spitz_keycode = s->keymap[keycode & 0x7f]; if (spitz_keycode == -1) return; /* Handle the additional keys */ if ((spitz_keycode >> 4) == SPITZ_KEY_SENSE_NUM) { qemu_set_irq(s->gpiomap[spitz_keycode & 0xf], (keycode < 0x80)); return; } if (keycode & 0x80) s->keyrow[spitz_keycode >> 4] &= ~(1 << (spitz_keycode & 0xf)); else s->keyrow[spitz_keycode >> 4] |= 1 << (spitz_keycode & 0xf); spitz_keyboard_sense_update(s); } #define SPITZ_MOD_SHIFT (1 << 7) #define SPITZ_MOD_CTRL (1 << 8) #define SPITZ_MOD_FN (1 << 9) #define QUEUE_KEY(c) s->fifo[(s->fifopos + s->fifolen ++) & 0xf] = c static void spitz_keyboard_handler(void *opaque, int keycode) { SpitzKeyboardState *s = opaque; uint16_t code; int mapcode; switch (keycode) { case 0x2a: /* Left Shift */ s->modifiers |= 1; break; case 0xaa: s->modifiers &= ~1; break; case 0x36: /* Right Shift */ s->modifiers |= 2; break; case 0xb6: s->modifiers &= ~2; break; case 0x1d: /* Control */ s->modifiers |= 4; break; case 0x9d: s->modifiers &= ~4; break; case 0x38: /* Alt */ s->modifiers |= 8; break; case 0xb8: s->modifiers &= ~8; break; } code = s->pre_map[mapcode = ((s->modifiers & 3) ? (keycode | SPITZ_MOD_SHIFT) : (keycode & ~SPITZ_MOD_SHIFT))]; if (code != mapcode) { #if 0 if ((code & SPITZ_MOD_SHIFT) && !(s->modifiers & 1)) { QUEUE_KEY(0x2a | (keycode & 0x80)); } if ((code & SPITZ_MOD_CTRL) && !(s->modifiers & 4)) { QUEUE_KEY(0x1d | (keycode & 0x80)); } if ((code & SPITZ_MOD_FN) && !(s->modifiers & 8)) { QUEUE_KEY(0x38 | (keycode & 0x80)); } if ((code & SPITZ_MOD_FN) && (s->modifiers & 1)) { QUEUE_KEY(0x2a | (~keycode & 0x80)); } if ((code & SPITZ_MOD_FN) && (s->modifiers & 2)) { QUEUE_KEY(0x36 | (~keycode & 0x80)); } #else if (keycode & 0x80) { if ((s->imodifiers & 1 ) && !(s->modifiers & 1)) QUEUE_KEY(0x2a | 0x80); if ((s->imodifiers & 4 ) && !(s->modifiers & 4)) QUEUE_KEY(0x1d | 0x80); if ((s->imodifiers & 8 ) && !(s->modifiers & 8)) QUEUE_KEY(0x38 | 0x80); if ((s->imodifiers & 0x10) && (s->modifiers & 1)) QUEUE_KEY(0x2a); if ((s->imodifiers & 0x20) && (s->modifiers & 2)) QUEUE_KEY(0x36); s->imodifiers = 0; } else { if ((code & SPITZ_MOD_SHIFT) && !((s->modifiers | s->imodifiers) & 1)) { QUEUE_KEY(0x2a); s->imodifiers |= 1; } if ((code & SPITZ_MOD_CTRL) && !((s->modifiers | s->imodifiers) & 4)) { QUEUE_KEY(0x1d); s->imodifiers |= 4; } if ((code & SPITZ_MOD_FN) && !((s->modifiers | s->imodifiers) & 8)) { QUEUE_KEY(0x38); s->imodifiers |= 8; } if ((code & SPITZ_MOD_FN) && (s->modifiers & 1) && !(s->imodifiers & 0x10)) { QUEUE_KEY(0x2a | 0x80); s->imodifiers |= 0x10; } if ((code & SPITZ_MOD_FN) && (s->modifiers & 2) && !(s->imodifiers & 0x20)) { QUEUE_KEY(0x36 | 0x80); s->imodifiers |= 0x20; } } #endif } QUEUE_KEY((code & 0x7f) | (keycode & 0x80)); } static void spitz_keyboard_tick(void *opaque) { SpitzKeyboardState *s = (SpitzKeyboardState *) opaque; if (s->fifolen) { spitz_keyboard_keydown(s, s->fifo[s->fifopos ++]); s->fifolen --; if (s->fifopos >= 16) s->fifopos = 0; } timer_mod(s->kbdtimer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + NANOSECONDS_PER_SECOND / 32); } static void spitz_keyboard_pre_map(SpitzKeyboardState *s) { int i; for (i = 0; i < 0x100; i ++) s->pre_map[i] = i; s->pre_map[0x02 | SPITZ_MOD_SHIFT] = 0x02 | SPITZ_MOD_SHIFT; /* exclam */ s->pre_map[0x28 | SPITZ_MOD_SHIFT] = 0x03 | SPITZ_MOD_SHIFT; /* quotedbl */ s->pre_map[0x04 | SPITZ_MOD_SHIFT] = 0x04 | SPITZ_MOD_SHIFT; /* # */ s->pre_map[0x05 | SPITZ_MOD_SHIFT] = 0x05 | SPITZ_MOD_SHIFT; /* dollar */ s->pre_map[0x06 | SPITZ_MOD_SHIFT] = 0x06 | SPITZ_MOD_SHIFT; /* percent */ s->pre_map[0x08 | SPITZ_MOD_SHIFT] = 0x07 | SPITZ_MOD_SHIFT; /* ampersand */ s->pre_map[0x28] = 0x08 | SPITZ_MOD_SHIFT; /* ' */ s->pre_map[0x0a | SPITZ_MOD_SHIFT] = 0x09 | SPITZ_MOD_SHIFT; /* ( */ s->pre_map[0x0b | SPITZ_MOD_SHIFT] = 0x0a | SPITZ_MOD_SHIFT; /* ) */ s->pre_map[0x29 | SPITZ_MOD_SHIFT] = 0x0b | SPITZ_MOD_SHIFT; /* tilde */ s->pre_map[0x03 | SPITZ_MOD_SHIFT] = 0x0c | SPITZ_MOD_SHIFT; /* at */ s->pre_map[0xd3] = 0x0e | SPITZ_MOD_FN; /* Delete */ s->pre_map[0x3a] = 0x0f | SPITZ_MOD_FN; /* Caps_Lock */ s->pre_map[0x07 | SPITZ_MOD_SHIFT] = 0x11 | SPITZ_MOD_FN; /* ^ */ s->pre_map[0x0d] = 0x12 | SPITZ_MOD_FN; /* equal */ s->pre_map[0x0d | SPITZ_MOD_SHIFT] = 0x13 | SPITZ_MOD_FN; /* plus */ s->pre_map[0x1a] = 0x14 | SPITZ_MOD_FN; /* [ */ s->pre_map[0x1b] = 0x15 | SPITZ_MOD_FN; /* ] */ s->pre_map[0x1a | SPITZ_MOD_SHIFT] = 0x16 | SPITZ_MOD_FN; /* { */ s->pre_map[0x1b | SPITZ_MOD_SHIFT] = 0x17 | SPITZ_MOD_FN; /* } */ s->pre_map[0x27] = 0x22 | SPITZ_MOD_FN; /* semicolon */ s->pre_map[0x27 | SPITZ_MOD_SHIFT] = 0x23 | SPITZ_MOD_FN; /* colon */ s->pre_map[0x09 | SPITZ_MOD_SHIFT] = 0x24 | SPITZ_MOD_FN; /* asterisk */ s->pre_map[0x2b] = 0x25 | SPITZ_MOD_FN; /* backslash */ s->pre_map[0x2b | SPITZ_MOD_SHIFT] = 0x26 | SPITZ_MOD_FN; /* bar */ s->pre_map[0x0c | SPITZ_MOD_SHIFT] = 0x30 | SPITZ_MOD_FN; /* _ */ s->pre_map[0x33 | SPITZ_MOD_SHIFT] = 0x33 | SPITZ_MOD_FN; /* less */ s->pre_map[0x35] = 0x33 | SPITZ_MOD_SHIFT; /* slash */ s->pre_map[0x34 | SPITZ_MOD_SHIFT] = 0x34 | SPITZ_MOD_FN; /* greater */ s->pre_map[0x35 | SPITZ_MOD_SHIFT] = 0x34 | SPITZ_MOD_SHIFT; /* question */ s->pre_map[0x49] = 0x48 | SPITZ_MOD_FN; /* Page_Up */ s->pre_map[0x51] = 0x50 | SPITZ_MOD_FN; /* Page_Down */ s->modifiers = 0; s->imodifiers = 0; s->fifopos = 0; s->fifolen = 0; } #undef SPITZ_MOD_SHIFT #undef SPITZ_MOD_CTRL #undef SPITZ_MOD_FN static int spitz_keyboard_post_load(void *opaque, int version_id) { SpitzKeyboardState *s = (SpitzKeyboardState *) opaque; /* Release all pressed keys */ memset(s->keyrow, 0, sizeof(s->keyrow)); spitz_keyboard_sense_update(s); s->modifiers = 0; s->imodifiers = 0; s->fifopos = 0; s->fifolen = 0; return 0; } static void spitz_keyboard_register(PXA2xxState *cpu) { int i; DeviceState *dev; SpitzKeyboardState *s; dev = sysbus_create_simple(TYPE_SPITZ_KEYBOARD, -1, NULL); s = SPITZ_KEYBOARD(dev); for (i = 0; i < SPITZ_KEY_SENSE_NUM; i ++) qdev_connect_gpio_out(dev, i, qdev_get_gpio_in(cpu->gpio, spitz_gpio_key_sense[i])); for (i = 0; i < 5; i ++) s->gpiomap[i] = qdev_get_gpio_in(cpu->gpio, spitz_gpiomap[i]); if (!graphic_rotate) s->gpiomap[4] = qemu_irq_invert(s->gpiomap[4]); for (i = 0; i < 5; i++) qemu_set_irq(s->gpiomap[i], 0); for (i = 0; i < SPITZ_KEY_STROBE_NUM; i ++) qdev_connect_gpio_out(cpu->gpio, spitz_gpio_key_strobe[i], qdev_get_gpio_in(dev, i)); timer_mod(s->kbdtimer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL)); qemu_add_kbd_event_handler(spitz_keyboard_handler, s); } static void spitz_keyboard_init(Object *obj) { DeviceState *dev = DEVICE(obj); SpitzKeyboardState *s = SPITZ_KEYBOARD(obj); int i, j; for (i = 0; i < 0x80; i ++) s->keymap[i] = -1; for (i = 0; i < SPITZ_KEY_SENSE_NUM + 1; i ++) for (j = 0; j < SPITZ_KEY_STROBE_NUM; j ++) if (spitz_keymap[i][j] != -1) s->keymap[spitz_keymap[i][j]] = (i << 4) | j; spitz_keyboard_pre_map(s); qdev_init_gpio_in(dev, spitz_keyboard_strobe, SPITZ_KEY_STROBE_NUM); qdev_init_gpio_out(dev, s->sense, SPITZ_KEY_SENSE_NUM); } static void spitz_keyboard_realize(DeviceState *dev, Error **errp) { SpitzKeyboardState *s = SPITZ_KEYBOARD(dev); s->kbdtimer = timer_new_ns(QEMU_CLOCK_VIRTUAL, spitz_keyboard_tick, s); } /* LCD backlight controller */ #define LCDTG_RESCTL 0x00 #define LCDTG_PHACTRL 0x01 #define LCDTG_DUTYCTRL 0x02 #define LCDTG_POWERREG0 0x03 #define LCDTG_POWERREG1 0x04 #define LCDTG_GPOR3 0x05 #define LCDTG_PICTRL 0x06 #define LCDTG_POLCTRL 0x07 typedef struct { SSISlave ssidev; uint32_t bl_intensity; uint32_t bl_power; } SpitzLCDTG; static void spitz_bl_update(SpitzLCDTG *s) { if (s->bl_power && s->bl_intensity) zaurus_printf("LCD Backlight now at %i/63\n", s->bl_intensity); else zaurus_printf("LCD Backlight now off\n"); } static inline void spitz_bl_bit5(void *opaque, int line, int level) { SpitzLCDTG *s = opaque; int prev = s->bl_intensity; if (level) s->bl_intensity &= ~0x20; else s->bl_intensity |= 0x20; if (s->bl_power && prev != s->bl_intensity) spitz_bl_update(s); } static inline void spitz_bl_power(void *opaque, int line, int level) { SpitzLCDTG *s = opaque; s->bl_power = !!level; spitz_bl_update(s); } static uint32_t spitz_lcdtg_transfer(SSISlave *dev, uint32_t value) { SpitzLCDTG *s = FROM_SSI_SLAVE(SpitzLCDTG, dev); int addr; addr = value >> 5; value &= 0x1f; switch (addr) { case LCDTG_RESCTL: if (value) zaurus_printf("LCD in QVGA mode\n"); else zaurus_printf("LCD in VGA mode\n"); break; case LCDTG_DUTYCTRL: s->bl_intensity &= ~0x1f; s->bl_intensity |= value; if (s->bl_power) spitz_bl_update(s); break; case LCDTG_POWERREG0: /* Set common voltage to M62332FP */ break; } return 0; } static void spitz_lcdtg_realize(SSISlave *ssi, Error **errp) { SpitzLCDTG *s = FROM_SSI_SLAVE(SpitzLCDTG, ssi); DeviceState *dev = DEVICE(s); s->bl_power = 0; s->bl_intensity = 0x20; qdev_init_gpio_in_named(dev, spitz_bl_bit5, "bl_bit5", 1); qdev_init_gpio_in_named(dev, spitz_bl_power, "bl_power", 1); } /* SSP devices */ #define CORGI_SSP_PORT 2 #define SPITZ_GPIO_LCDCON_CS 53 #define SPITZ_GPIO_ADS7846_CS 14 #define SPITZ_GPIO_MAX1111_CS 20 #define SPITZ_GPIO_TP_INT 11 /* "Demux" the signal based on current chipselect */ typedef struct { SSISlave ssidev; SSIBus *bus[3]; uint32_t enable[3]; } CorgiSSPState; static uint32_t corgi_ssp_transfer(SSISlave *dev, uint32_t value) { CorgiSSPState *s = FROM_SSI_SLAVE(CorgiSSPState, dev); int i; for (i = 0; i < 3; i++) { if (s->enable[i]) { return ssi_transfer(s->bus[i], value); } } return 0; } static void corgi_ssp_gpio_cs(void *opaque, int line, int level) { CorgiSSPState *s = (CorgiSSPState *)opaque; assert(line >= 0 && line < 3); s->enable[line] = !level; } #define MAX1111_BATT_VOLT 1 #define MAX1111_BATT_TEMP 2 #define MAX1111_ACIN_VOLT 3 #define SPITZ_BATTERY_TEMP 0xe0 /* About 2.9V */ #define SPITZ_BATTERY_VOLT 0xd0 /* About 4.0V */ #define SPITZ_CHARGEON_ACIN 0x80 /* About 5.0V */ static void corgi_ssp_realize(SSISlave *d, Error **errp) { DeviceState *dev = DEVICE(d); CorgiSSPState *s = FROM_SSI_SLAVE(CorgiSSPState, d); qdev_init_gpio_in(dev, corgi_ssp_gpio_cs, 3); s->bus[0] = ssi_create_bus(dev, "ssi0"); s->bus[1] = ssi_create_bus(dev, "ssi1"); s->bus[2] = ssi_create_bus(dev, "ssi2"); } static void spitz_ssp_attach(SpitzMachineState *sms) { void *bus; sms->mux = ssi_create_slave(sms->mpu->ssp[CORGI_SSP_PORT - 1], "corgi-ssp"); bus = qdev_get_child_bus(sms->mux, "ssi0"); sms->lcdtg = ssi_create_slave(bus, "spitz-lcdtg"); bus = qdev_get_child_bus(sms->mux, "ssi1"); sms->ads7846 = ssi_create_slave(bus, "ads7846"); qdev_connect_gpio_out(sms->ads7846, 0, qdev_get_gpio_in(sms->mpu->gpio, SPITZ_GPIO_TP_INT)); bus = qdev_get_child_bus(sms->mux, "ssi2"); sms->max1111 = qdev_new(TYPE_MAX_1111); qdev_prop_set_uint8(sms->max1111, "input1" /* BATT_VOLT */, SPITZ_BATTERY_VOLT); qdev_prop_set_uint8(sms->max1111, "input2" /* BATT_TEMP */, 0); qdev_prop_set_uint8(sms->max1111, "input3" /* ACIN_VOLT */, SPITZ_CHARGEON_ACIN); ssi_realize_and_unref(sms->max1111, bus, &error_fatal); qdev_connect_gpio_out(sms->mpu->gpio, SPITZ_GPIO_LCDCON_CS, qdev_get_gpio_in(sms->mux, 0)); qdev_connect_gpio_out(sms->mpu->gpio, SPITZ_GPIO_ADS7846_CS, qdev_get_gpio_in(sms->mux, 1)); qdev_connect_gpio_out(sms->mpu->gpio, SPITZ_GPIO_MAX1111_CS, qdev_get_gpio_in(sms->mux, 2)); } /* CF Microdrive */ static void spitz_microdrive_attach(PXA2xxState *cpu, int slot) { PCMCIACardState *md; DriveInfo *dinfo; dinfo = drive_get(IF_IDE, 0, 0); if (!dinfo || dinfo->media_cd) return; md = dscm1xxxx_init(dinfo); pxa2xx_pcmcia_attach(cpu->pcmcia[slot], md); } /* Wm8750 and Max7310 on I2C */ #define AKITA_MAX_ADDR 0x18 #define SPITZ_WM_ADDRL 0x1b #define SPITZ_WM_ADDRH 0x1a #define SPITZ_GPIO_WM 5 static void spitz_wm8750_addr(void *opaque, int line, int level) { I2CSlave *wm = (I2CSlave *) opaque; if (level) i2c_set_slave_address(wm, SPITZ_WM_ADDRH); else i2c_set_slave_address(wm, SPITZ_WM_ADDRL); } static void spitz_i2c_setup(PXA2xxState *cpu) { /* Attach the CPU on one end of our I2C bus. */ I2CBus *bus = pxa2xx_i2c_bus(cpu->i2c[0]); DeviceState *wm; /* Attach a WM8750 to the bus */ wm = i2c_create_slave(bus, TYPE_WM8750, 0); spitz_wm8750_addr(wm, 0, 0); qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_WM, qemu_allocate_irq(spitz_wm8750_addr, wm, 0)); /* .. and to the sound interface. */ cpu->i2s->opaque = wm; cpu->i2s->codec_out = wm8750_dac_dat; cpu->i2s->codec_in = wm8750_adc_dat; wm8750_data_req_set(wm, cpu->i2s->data_req, cpu->i2s); } static void spitz_akita_i2c_setup(PXA2xxState *cpu) { /* Attach a Max7310 to Akita I2C bus. */ i2c_create_slave(pxa2xx_i2c_bus(cpu->i2c[0]), "max7310", AKITA_MAX_ADDR); } /* Other peripherals */ /* * Encapsulation of some miscellaneous GPIO line behaviour for the Spitz boards. * * QEMU interface: * + named GPIO inputs "green-led", "orange-led", "charging", "discharging": * these currently just print messages that the line has been signalled * + named GPIO input "adc-temp-on": set to cause the battery-temperature * value to be passed to the max111x ADC * + named GPIO output "adc-temp": the ADC value, to be wired up to the max111x */ #define TYPE_SPITZ_MISC_GPIO "spitz-misc-gpio" #define SPITZ_MISC_GPIO(obj) \ OBJECT_CHECK(SpitzMiscGPIOState, (obj), TYPE_SPITZ_MISC_GPIO) typedef struct SpitzMiscGPIOState { SysBusDevice parent_obj; qemu_irq adc_value; } SpitzMiscGPIOState; static void spitz_misc_charging(void *opaque, int n, int level) { zaurus_printf("Charging %s.\n", level ? "off" : "on"); } static void spitz_misc_discharging(void *opaque, int n, int level) { zaurus_printf("Discharging %s.\n", level ? "off" : "on"); } static void spitz_misc_green_led(void *opaque, int n, int level) { zaurus_printf("Green LED %s.\n", level ? "off" : "on"); } static void spitz_misc_orange_led(void *opaque, int n, int level) { zaurus_printf("Orange LED %s.\n", level ? "off" : "on"); } static void spitz_misc_adc_temp(void *opaque, int n, int level) { SpitzMiscGPIOState *s = SPITZ_MISC_GPIO(opaque); int batt_temp = level ? SPITZ_BATTERY_TEMP : 0; qemu_set_irq(s->adc_value, batt_temp); } static void spitz_misc_gpio_init(Object *obj) { SpitzMiscGPIOState *s = SPITZ_MISC_GPIO(obj); DeviceState *dev = DEVICE(obj); qdev_init_gpio_in_named(dev, spitz_misc_charging, "charging", 1); qdev_init_gpio_in_named(dev, spitz_misc_discharging, "discharging", 1); qdev_init_gpio_in_named(dev, spitz_misc_green_led, "green-led", 1); qdev_init_gpio_in_named(dev, spitz_misc_orange_led, "orange-led", 1); qdev_init_gpio_in_named(dev, spitz_misc_adc_temp, "adc-temp-on", 1); qdev_init_gpio_out_named(dev, &s->adc_value, "adc-temp", 1); } #define SPITZ_SCP_LED_GREEN 1 #define SPITZ_SCP_JK_B 2 #define SPITZ_SCP_CHRG_ON 3 #define SPITZ_SCP_MUTE_L 4 #define SPITZ_SCP_MUTE_R 5 #define SPITZ_SCP_CF_POWER 6 #define SPITZ_SCP_LED_ORANGE 7 #define SPITZ_SCP_JK_A 8 #define SPITZ_SCP_ADC_TEMP_ON 9 #define SPITZ_SCP2_IR_ON 1 #define SPITZ_SCP2_AKIN_PULLUP 2 #define SPITZ_SCP2_BACKLIGHT_CONT 7 #define SPITZ_SCP2_BACKLIGHT_ON 8 #define SPITZ_SCP2_MIC_BIAS 9 static void spitz_scoop_gpio_setup(SpitzMachineState *sms) { DeviceState *miscdev = sysbus_create_simple(TYPE_SPITZ_MISC_GPIO, -1, NULL); sms->misc_gpio = miscdev; qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_CHRG_ON, qdev_get_gpio_in_named(miscdev, "charging", 0)); qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_JK_B, qdev_get_gpio_in_named(miscdev, "discharging", 0)); qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_LED_GREEN, qdev_get_gpio_in_named(miscdev, "green-led", 0)); qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_LED_ORANGE, qdev_get_gpio_in_named(miscdev, "orange-led", 0)); qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_ADC_TEMP_ON, qdev_get_gpio_in_named(miscdev, "adc-temp-on", 0)); qdev_connect_gpio_out_named(miscdev, "adc-temp", 0, qdev_get_gpio_in(sms->max1111, MAX1111_BATT_TEMP)); if (sms->scp1) { qdev_connect_gpio_out(sms->scp1, SPITZ_SCP2_BACKLIGHT_CONT, qdev_get_gpio_in_named(sms->lcdtg, "bl_bit5", 0)); qdev_connect_gpio_out(sms->scp1, SPITZ_SCP2_BACKLIGHT_ON, qdev_get_gpio_in_named(sms->lcdtg, "bl_power", 0)); } } #define SPITZ_GPIO_HSYNC 22 #define SPITZ_GPIO_SD_DETECT 9 #define SPITZ_GPIO_SD_WP 81 #define SPITZ_GPIO_ON_RESET 89 #define SPITZ_GPIO_BAT_COVER 90 #define SPITZ_GPIO_CF1_IRQ 105 #define SPITZ_GPIO_CF1_CD 94 #define SPITZ_GPIO_CF2_IRQ 106 #define SPITZ_GPIO_CF2_CD 93 static int spitz_hsync; static void spitz_lcd_hsync_handler(void *opaque, int line, int level) { PXA2xxState *cpu = (PXA2xxState *) opaque; qemu_set_irq(qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_HSYNC), spitz_hsync); spitz_hsync ^= 1; } static void spitz_reset(void *opaque, int line, int level) { if (level) { qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); } } static void spitz_gpio_setup(PXA2xxState *cpu, int slots) { qemu_irq lcd_hsync; qemu_irq reset; /* * Bad hack: We toggle the LCD hsync GPIO on every GPIO status * read to satisfy broken guests that poll-wait for hsync. * Simulating a real hsync event would be less practical and * wouldn't guarantee that a guest ever exits the loop. */ spitz_hsync = 0; lcd_hsync = qemu_allocate_irq(spitz_lcd_hsync_handler, cpu, 0); pxa2xx_gpio_read_notifier(cpu->gpio, lcd_hsync); pxa2xx_lcd_vsync_notifier(cpu->lcd, lcd_hsync); /* MMC/SD host */ pxa2xx_mmci_handlers(cpu->mmc, qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_SD_WP), qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_SD_DETECT)); /* Battery lock always closed */ qemu_irq_raise(qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_BAT_COVER)); /* Handle reset */ reset = qemu_allocate_irq(spitz_reset, cpu, 0); qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_ON_RESET, reset); /* PCMCIA signals: card's IRQ and Card-Detect */ if (slots >= 1) pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[0], qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF1_IRQ), qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF1_CD)); if (slots >= 2) pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[1], qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF2_IRQ), qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF2_CD)); } /* Board init. */ #define SPITZ_RAM 0x04000000 #define SPITZ_ROM 0x00800000 static struct arm_boot_info spitz_binfo = { .loader_start = PXA2XX_SDRAM_BASE, .ram_size = 0x04000000, }; static void spitz_common_init(MachineState *machine) { SpitzMachineClass *smc = SPITZ_MACHINE_GET_CLASS(machine); SpitzMachineState *sms = SPITZ_MACHINE(machine); enum spitz_model_e model = smc->model; PXA2xxState *mpu; MemoryRegion *address_space_mem = get_system_memory(); MemoryRegion *rom = g_new(MemoryRegion, 1); /* Setup CPU & memory */ mpu = pxa270_init(address_space_mem, spitz_binfo.ram_size, machine->cpu_type); sms->mpu = mpu; sl_flash_register(mpu, (model == spitz) ? FLASH_128M : FLASH_1024M); memory_region_init_rom(rom, NULL, "spitz.rom", SPITZ_ROM, &error_fatal); memory_region_add_subregion(address_space_mem, 0, rom); /* Setup peripherals */ spitz_keyboard_register(mpu); spitz_ssp_attach(sms); sms->scp0 = sysbus_create_simple("scoop", 0x10800000, NULL); if (model != akita) { sms->scp1 = sysbus_create_simple("scoop", 0x08800040, NULL); } else { sms->scp1 = NULL; } spitz_scoop_gpio_setup(sms); spitz_gpio_setup(mpu, (model == akita) ? 1 : 2); spitz_i2c_setup(mpu); if (model == akita) spitz_akita_i2c_setup(mpu); if (model == terrier) /* A 6.0 GB microdrive is permanently sitting in CF slot 1. */ spitz_microdrive_attach(mpu, 1); else if (model != akita) /* A 4.0 GB microdrive is permanently sitting in CF slot 0. */ spitz_microdrive_attach(mpu, 0); spitz_binfo.board_id = smc->arm_id; arm_load_kernel(mpu->cpu, machine, &spitz_binfo); sl_bootparam_write(SL_PXA_PARAM_BASE); } static void spitz_common_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); mc->block_default_type = IF_IDE; mc->ignore_memory_transaction_failures = true; mc->init = spitz_common_init; } static const TypeInfo spitz_common_info = { .name = TYPE_SPITZ_MACHINE, .parent = TYPE_MACHINE, .abstract = true, .instance_size = sizeof(SpitzMachineState), .class_size = sizeof(SpitzMachineClass), .class_init = spitz_common_class_init, }; static void akitapda_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); SpitzMachineClass *smc = SPITZ_MACHINE_CLASS(oc); mc->desc = "Sharp SL-C1000 (Akita) PDA (PXA270)"; mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c0"); smc->model = akita; smc->arm_id = 0x2e8; } static const TypeInfo akitapda_type = { .name = MACHINE_TYPE_NAME("akita"), .parent = TYPE_SPITZ_MACHINE, .class_init = akitapda_class_init, }; static void spitzpda_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); SpitzMachineClass *smc = SPITZ_MACHINE_CLASS(oc); mc->desc = "Sharp SL-C3000 (Spitz) PDA (PXA270)"; mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c0"); smc->model = spitz; smc->arm_id = 0x2c9; } static const TypeInfo spitzpda_type = { .name = MACHINE_TYPE_NAME("spitz"), .parent = TYPE_SPITZ_MACHINE, .class_init = spitzpda_class_init, }; static void borzoipda_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); SpitzMachineClass *smc = SPITZ_MACHINE_CLASS(oc); mc->desc = "Sharp SL-C3100 (Borzoi) PDA (PXA270)"; mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c0"); smc->model = borzoi; smc->arm_id = 0x33f; } static const TypeInfo borzoipda_type = { .name = MACHINE_TYPE_NAME("borzoi"), .parent = TYPE_SPITZ_MACHINE, .class_init = borzoipda_class_init, }; static void terrierpda_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); SpitzMachineClass *smc = SPITZ_MACHINE_CLASS(oc); mc->desc = "Sharp SL-C3200 (Terrier) PDA (PXA270)"; mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c5"); smc->model = terrier; smc->arm_id = 0x33f; } static const TypeInfo terrierpda_type = { .name = MACHINE_TYPE_NAME("terrier"), .parent = TYPE_SPITZ_MACHINE, .class_init = terrierpda_class_init, }; static void spitz_machine_init(void) { type_register_static(&spitz_common_info); type_register_static(&akitapda_type); type_register_static(&spitzpda_type); type_register_static(&borzoipda_type); type_register_static(&terrierpda_type); } type_init(spitz_machine_init) static bool is_version_0(void *opaque, int version_id) { return version_id == 0; } static VMStateDescription vmstate_sl_nand_info = { .name = "sl-nand", .version_id = 0, .minimum_version_id = 0, .fields = (VMStateField[]) { VMSTATE_UINT8(ctl, SLNANDState), VMSTATE_STRUCT(ecc, SLNANDState, 0, vmstate_ecc_state, ECCState), VMSTATE_END_OF_LIST(), }, }; static Property sl_nand_properties[] = { DEFINE_PROP_UINT8("manf_id", SLNANDState, manf_id, NAND_MFR_SAMSUNG), DEFINE_PROP_UINT8("chip_id", SLNANDState, chip_id, 0xf1), DEFINE_PROP_END_OF_LIST(), }; static void sl_nand_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); dc->vmsd = &vmstate_sl_nand_info; device_class_set_props(dc, sl_nand_properties); dc->realize = sl_nand_realize; /* Reason: init() method uses drive_get() */ dc->user_creatable = false; } static const TypeInfo sl_nand_info = { .name = TYPE_SL_NAND, .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(SLNANDState), .instance_init = sl_nand_init, .class_init = sl_nand_class_init, }; static VMStateDescription vmstate_spitz_kbd = { .name = "spitz-keyboard", .version_id = 1, .minimum_version_id = 0, .post_load = spitz_keyboard_post_load, .fields = (VMStateField[]) { VMSTATE_UINT16(sense_state, SpitzKeyboardState), VMSTATE_UINT16(strobe_state, SpitzKeyboardState), VMSTATE_UNUSED_TEST(is_version_0, 5), VMSTATE_END_OF_LIST(), }, }; static void spitz_keyboard_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); dc->vmsd = &vmstate_spitz_kbd; dc->realize = spitz_keyboard_realize; } static const TypeInfo spitz_keyboard_info = { .name = TYPE_SPITZ_KEYBOARD, .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(SpitzKeyboardState), .instance_init = spitz_keyboard_init, .class_init = spitz_keyboard_class_init, }; static const VMStateDescription vmstate_corgi_ssp_regs = { .name = "corgi-ssp", .version_id = 2, .minimum_version_id = 2, .fields = (VMStateField[]) { VMSTATE_SSI_SLAVE(ssidev, CorgiSSPState), VMSTATE_UINT32_ARRAY(enable, CorgiSSPState, 3), VMSTATE_END_OF_LIST(), } }; static void corgi_ssp_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); SSISlaveClass *k = SSI_SLAVE_CLASS(klass); k->realize = corgi_ssp_realize; k->transfer = corgi_ssp_transfer; dc->vmsd = &vmstate_corgi_ssp_regs; } static const TypeInfo corgi_ssp_info = { .name = "corgi-ssp", .parent = TYPE_SSI_SLAVE, .instance_size = sizeof(CorgiSSPState), .class_init = corgi_ssp_class_init, }; static const VMStateDescription vmstate_spitz_lcdtg_regs = { .name = "spitz-lcdtg", .version_id = 1, .minimum_version_id = 1, .fields = (VMStateField[]) { VMSTATE_SSI_SLAVE(ssidev, SpitzLCDTG), VMSTATE_UINT32(bl_intensity, SpitzLCDTG), VMSTATE_UINT32(bl_power, SpitzLCDTG), VMSTATE_END_OF_LIST(), } }; static void spitz_lcdtg_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); SSISlaveClass *k = SSI_SLAVE_CLASS(klass); k->realize = spitz_lcdtg_realize; k->transfer = spitz_lcdtg_transfer; dc->vmsd = &vmstate_spitz_lcdtg_regs; } static const TypeInfo spitz_lcdtg_info = { .name = "spitz-lcdtg", .parent = TYPE_SSI_SLAVE, .instance_size = sizeof(SpitzLCDTG), .class_init = spitz_lcdtg_class_init, }; static const TypeInfo spitz_misc_gpio_info = { .name = TYPE_SPITZ_MISC_GPIO, .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(SpitzMiscGPIOState), .instance_init = spitz_misc_gpio_init, /* * No class_init required: device has no internal state so does not * need to set up reset or vmstate, and does not have a realize method. */ }; static void spitz_register_types(void) { type_register_static(&corgi_ssp_info); type_register_static(&spitz_lcdtg_info); type_register_static(&spitz_keyboard_info); type_register_static(&sl_nand_info); type_register_static(&spitz_misc_gpio_info); } type_init(spitz_register_types)