/* PXE API interface for Etherboot.
*
* Copyright (C) 2004 Michael Brown <mbrown@fensystems.co.uk>.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/* Tags used in this file:
*
* FIXME : obvious
* PXESPEC : question over interpretation of the PXE spec.
*/
#ifdef PXE_EXPORT
#include "etherboot.h"
#include "pxe.h"
#include "pxe_export.h"
#include "pxe_callbacks.h"
#include "dev.h"
#include "nic.h"
#include "pci.h"
#include "cpu.h"
#include "timer.h"
#undef DBG
#if TRACE_PXE
#define DBG(...) printf ( __VA_ARGS__ )
#else
#define DBG(...)
#endif
/* Not sure why this isn't a globally-used structure within Etherboot.
* (Because I didn't want to use packed to prevent gcc from aligning
* source however it liked. Also nstype is a u16, not a uint. - Ken)
*/
typedef struct {
char dest[ETH_ALEN];
char source[ETH_ALEN];
unsigned int nstype;
} media_header_t;
static const char broadcast_mac[] = { 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF };
/* Global pointer to currently installed PXE stack */
pxe_stack_t *pxe_stack = NULL;
/* Various startup/shutdown routines. The startup/shutdown call
* sequence is incredibly badly defined in the Intel PXE spec, for
* example:
*
* PXENV_UNDI_INITIALIZE says that the parameters used to initialize
* the adaptor should be those supplied to the most recent
* PXENV_UNDI_STARTUP call. PXENV_UNDI_STARTUP takes no parameters.
*
* PXENV_UNDI_CLEANUP says that the rest of the API will not be
* available after making this call. Figure 3-3 ("Early UNDI API
* usage") shows a call to PXENV_UNDI_CLEANUP being followed by a
* call to the supposedly now unavailable PXENV_STOP_UNDI.
*
* PXENV_UNLOAD_BASE_STACK talks about freeing up the memory
* occupied by the PXE stack. Figure 4-3 ("PXE IPL") shows a call
* to PXENV_STOP_UNDI being made after the call to
* PXENV_UNLOAD_BASE_STACK, by which time the entire PXE stack
* should have been freed (and, potentially, zeroed).
*
* Nothing, anywhere, seems to mention who's responsible for freeing
* up the base memory allocated for the stack segment. It's not
* even clear whether or not this is expected to be in free base
* memory rather than claimed base memory.
*
* Consequently, we adopt a rather defensive strategy, designed to
* work with any conceivable sequence of initialisation or shutdown
* calls. We have only two things that we care about:
*
* 1. Have we hooked INT 1A and INT 15,E820(etc.)?
* 2. Is the NIC initialised?
*
* The NIC should never be initialised without the vectors being
* hooked, similarly the vectors should never be unhooked with the NIC
* still initialised. We do, however, want to be able to have the
* vectors hooked with the NIC shutdown. We therefore have three
* possible states:
*
* 1. Ready to unload: interrupts unhooked, NIC shutdown.
* 2. Midway: interrupts hooked, NIC shutdown.
* 3. Fully ready: interrupts hooked, NIC initialised.
*
* We provide the three states CAN_UNLOAD, MIDWAY and READY to define
* these, and the call pxe_ensure_state() to ensure that the stack is
* in the specified state. All our PXE API call implementations
* should use this call to ensure that the state is as required for
* that PXE API call. This enables us to cope with whatever the
* end-user's interpretation of the PXE spec may be. It even allows
* for someone calling e.g. PXENV_START_UNDI followed by
* PXENV_UDP_WRITE, without bothering with any of the intervening
* calls.
*
* pxe_ensure_state() returns 1 for success, 0 for failure. In the
* event of failure (which can arise from e.g. asking for state READY
* when we don't know where our NIC is), the error code
* PXENV_STATUS_UNDI_INVALID_STATE should be returned to the user.
* The macros ENSURE_XXX() can be used to achieve this without lots of
* duplicated code.
*/
/* pxe_[un]hook_stack are architecture-specific and provided in
* pxe_callbacks.c
*/
int pxe_initialise_nic ( void ) {
if ( pxe_stack->state >= READY ) return 1;
#warning "device probing mechanism has completely changed"
#if 0
/* Check if NIC is initialised. dev.disable is set to 0
* when disable() is called, so we use this.
*/
if ( dev.disable ) {
/* NIC may have been initialised independently
* (e.g. when we set up the stack prior to calling the
* NBP).
*/
pxe_stack->state = READY;
return 1;
}
/* If we already have a NIC defined, reuse that one with
* PROBE_AWAKE. If one was specifed via PXENV_START_UNDI, try
* that one first. Otherwise, set PROBE_FIRST.
*/
if ( dev.state.pci.dev.use_specified == 1 ) {
dev.how_probe = PROBE_NEXT;
DBG ( " initialising NIC specified via START_UNDI" );
} else if ( dev.state.pci.dev.driver ) {
DBG ( " reinitialising NIC" );
dev.how_probe = PROBE_AWAKE;
} else {
DBG ( " probing for any NIC" );
dev.how_probe = PROBE_FIRST;
}
/* Call probe routine to bring up the NIC */
if ( eth_probe ( &dev ) != PROBE_WORKED ) {
DBG ( " failed" );
return 0;
}
#endif
pxe_stack->state = READY;
return 1;
}
int pxe_shutdown_nic ( void ) {
if ( pxe_stack->state <= MIDWAY ) return 1;
eth_irq ( DISABLE );
disable ( &dev );
pxe_stack->state = MIDWAY;
return 1;
}
int ensure_pxe_state ( pxe_stack_state_t wanted ) {
int success = 1;
if ( ! pxe_stack ) return 0;
if ( wanted >= MIDWAY )
success = success & hook_pxe_stack();
if ( wanted > MIDWAY ) {
success = success & pxe_initialise_nic();
} else {
success = success & pxe_shutdown_nic();
}
if ( wanted < MIDWAY )
success = success & unhook_pxe_stack();
return success;
}
#define ENSURE_CAN_UNLOAD(structure) if ( ! ensure_pxe_state(CAN_UNLOAD) ) { \
structure->Status = PXENV_STATUS_UNDI_INVALID_STATE; \
return PXENV_EXIT_FAILURE; }
#define ENSURE_MIDWAY(structure) if ( ! ensure_pxe_state(MIDWAY) ) { \
structure->Status = PXENV_STATUS_UNDI_INVALID_STATE; \
return PXENV_EXIT_FAILURE; }
#define ENSURE_READY(structure) if ( ! ensure_pxe_state(READY) ) { \
structure->Status = PXENV_STATUS_UNDI_INVALID_STATE; \
return PXENV_EXIT_FAILURE; }
/*****************************************************************************
*
* Actual PXE API calls
*
*****************************************************************************/
/* PXENV_START_UNDI
*
* Status: working
*/
PXENV_EXIT_t pxenv_start_undi ( t_PXENV_START_UNDI *start_undi ) {
unsigned char bus, devfn;
DBG ( "PXENV_START_UNDI" );
ENSURE_MIDWAY(start_undi);
/* Record PCI bus & devfn passed by caller, so we know which
* NIC they want to use.
*
* If they don't match our already-existing NIC structure, set
* values to ensure that the specified NIC is used at the next
* call to pxe_intialise_nic().
*/
bus = ( start_undi->ax >> 8 ) & 0xff;
devfn = start_undi->ax & 0xff;
#warning "device probing mechanism has completely changed"
#if 0
if ( ( pci->dev.driver == NULL ) ||
( pci->dev.bus != bus ) || ( pci->dev.devfn != devfn ) ) {
/* This is quite a bit of a hack and relies on
* knowledge of the internal operation of Etherboot's
* probe mechanism.
*/
DBG ( " set PCI %hhx:%hhx.%hhx",
bus, PCI_SLOT(devfn), PCI_FUNC(devfn) );
dev->type = BOOT_NIC;
dev->to_probe = PROBE_PCI;
memset ( &dev->state, 0, sizeof(dev->state) );
pci->advance = 1;
pci->dev.use_specified = 1;
pci->dev.bus = bus;
pci->dev.devfn = devfn;
}
#endif
start_undi->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
/* PXENV_UNDI_STARTUP
*
* Status: working
*/
PXENV_EXIT_t pxenv_undi_startup ( t_PXENV_UNDI_STARTUP *undi_startup ) {
DBG ( "PXENV_UNDI_STARTUP" );
ENSURE_MIDWAY(undi_startup);
undi_startup->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
/* PXENV_UNDI_CLEANUP
*
* Status: working
*/
PXENV_EXIT_t pxenv_undi_cleanup ( t_PXENV_UNDI_CLEANUP *undi_cleanup ) {
DBG ( "PXENV_UNDI_CLEANUP" );
ENSURE_CAN_UNLOAD ( undi_cleanup );
undi_cleanup->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
/* PXENV_UNDI_INITIALIZE
*
* Status: working
*/
PXENV_EXIT_t pxenv_undi_initialize ( t_PXENV_UNDI_INITIALIZE
*undi_initialize ) {
DBG ( "PXENV_UNDI_INITIALIZE" );
ENSURE_MIDWAY ( undi_initialize );
undi_initialize->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
/* PXENV_UNDI_RESET_ADAPTER
*
* Status: working
*/
PXENV_EXIT_t pxenv_undi_reset_adapter ( t_PXENV_UNDI_RESET_ADAPTER
*undi_reset_adapter ) {
DBG ( "PXENV_UNDI_RESET_ADAPTER" );
ENSURE_MIDWAY ( undi_reset_adapter );
ENSURE_READY ( undi_reset_adapter );
undi_reset_adapter->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
/* PXENV_UNDI_SHUTDOWN
*
* Status: working
*/
PXENV_EXIT_t pxenv_undi_shutdown ( t_PXENV_UNDI_SHUTDOWN *undi_shutdown ) {
DBG ( "PXENV_UNDI_SHUTDOWN" );
ENSURE_MIDWAY ( undi_shutdown );
undi_shutdown->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
/* PXENV_UNDI_OPEN
*
* Status: working
*/
PXENV_EXIT_t pxenv_undi_open ( t_PXENV_UNDI_OPEN *undi_open ) {
DBG ( "PXENV_UNDI_OPEN" );
ENSURE_READY ( undi_open );
/* PXESPEC: This is where we choose to enable interrupts.
* Can't actually find where we're meant to in the PXE spec,
* but this should work.
*/
eth_irq ( ENABLE );
undi_open->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
/* PXENV_UNDI_CLOSE
*
* Status: working
*/
PXENV_EXIT_t pxenv_undi_close ( t_PXENV_UNDI_CLOSE *undi_close ) {
DBG ( "PXENV_UNDI_CLOSE" );
ENSURE_MIDWAY ( undi_close );
undi_close->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
/* PXENV_UNDI_TRANSMIT
*
* Status: working
*/
PXENV_EXIT_t pxenv_undi_transmit ( t_PXENV_UNDI_TRANSMIT *undi_transmit ) {
t_PXENV_UNDI_TBD *tbd;
const char *dest;
unsigned int type;
unsigned int length;
const char *data;
media_header_t *media_header;
DBG ( "PXENV_UNDI_TRANSMIT" );
ENSURE_READY ( undi_transmit );
/* We support only the "immediate" portion of the TBD. Who
* knows what Intel's "engineers" were smoking when they came
* up with the array of transmit data blocks...
*/
tbd = SEGOFF16_TO_PTR ( undi_transmit->TBD );
if ( tbd->DataBlkCount > 0 ) {
undi_transmit->Status = PXENV_STATUS_UNDI_INVALID_PARAMETER;
return PXENV_EXIT_FAILURE;
}
data = SEGOFF16_TO_PTR ( tbd->Xmit );
length = tbd->ImmedLength;
/* If destination is broadcast, we need to supply the MAC address */
if ( undi_transmit->XmitFlag == XMT_BROADCAST ) {
dest = broadcast_mac;
} else {
dest = SEGOFF16_TO_PTR ( undi_transmit->DestAddr );
}
/* We can't properly support P_UNKNOWN without rewriting all
* the driver transmit() methods, so we cheat: if P_UNKNOWN is
* specified we rip the destination address and type out of
* the pre-assembled packet, then skip over the header.
*/
switch ( undi_transmit->Protocol ) {
case P_IP: type = IP; break;
case P_ARP: type = ARP; break;
case P_RARP: type = RARP; break;
case P_UNKNOWN:
media_header = (media_header_t*)data;
dest = media_header->dest;
type = ntohs ( media_header->nstype );
data += ETH_HLEN;
length -= ETH_HLEN;
break;
default:
undi_transmit->Status = PXENV_STATUS_UNDI_INVALID_PARAMETER;
return PXENV_EXIT_FAILURE;
}
/* Send the packet */
eth_transmit ( dest, type, length, data );
undi_transmit->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
/* PXENV_UNDI_SET_MCAST_ADDRESS
*
* Status: stub (no PXE multicast support)
*/
PXENV_EXIT_t pxenv_undi_set_mcast_address ( t_PXENV_UNDI_SET_MCAST_ADDRESS
*undi_set_mcast_address ) {
DBG ( "PXENV_UNDI_SET_MCAST_ADDRESS" );
/* ENSURE_READY ( undi_set_mcast_address ); */
undi_set_mcast_address->Status = PXENV_STATUS_UNSUPPORTED;
return PXENV_EXIT_FAILURE;
}
/* PXENV_UNDI_SET_STATION_ADDRESS
*
* Status: working (deliberately incomplete)
*/
PXENV_EXIT_t pxenv_undi_set_station_address ( t_PXENV_UNDI_SET_STATION_ADDRESS
*undi_set_station_address ) {
DBG ( "PXENV_UNDI_SET_STATION_ADDRESS" );
ENSURE_READY ( undi_set_station_address );
/* We don't offer a facility to set the MAC address; this
* would require adding extra code to all the Etherboot
* drivers, for very little benefit. If we're setting it to
* the current value anyway then return success, otherwise
* return UNSUPPORTED.
*/
if ( memcmp ( nic.node_addr,
&undi_set_station_address->StationAddress,
ETH_ALEN ) == 0 ) {
undi_set_station_address->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
undi_set_station_address->Status = PXENV_STATUS_UNSUPPORTED;
return PXENV_EXIT_FAILURE;
}
/* PXENV_UNDI_SET_PACKET_FILTER
*
* Status: won't implement (would require driver API changes for no
* real benefit)
*/
PXENV_EXIT_t pxenv_undi_set_packet_filter ( t_PXENV_UNDI_SET_PACKET_FILTER
*undi_set_packet_filter ) {
DBG ( "PXENV_UNDI_SET_PACKET_FILTER" );
/* ENSURE_READY ( undi_set_packet_filter ); */
undi_set_packet_filter->Status = PXENV_STATUS_UNSUPPORTED;
return PXENV_EXIT_FAILURE;
}
/* PXENV_UNDI_GET_INFORMATION
*
* Status: working
*/
PXENV_EXIT_t pxenv_undi_get_information ( t_PXENV_UNDI_GET_INFORMATION
*undi_get_information ) {
DBG ( "PXENV_UNDI_GET_INFORMATION" );
ENSURE_READY ( undi_get_information );
undi_get_information->BaseIo = nic.ioaddr;
undi_get_information->IntNumber = nic.irqno;
/* Cheat: assume all cards can cope with this */
undi_get_information->MaxTranUnit = ETH_MAX_MTU;
/* Cheat: we only ever have Ethernet cards */
undi_get_information->HwType = ETHER_TYPE;
undi_get_information->HwAddrLen = ETH_ALEN;
/* Cheat: assume card is always configured with its permanent
* node address. This is a valid assumption within Etherboot
* at the time of writing.
*/
memcpy ( &undi_get_information->CurrentNodeAddress, nic.node_addr,
ETH_ALEN );
memcpy ( &undi_get_information->PermNodeAddress, nic.node_addr,
ETH_ALEN );
undi_get_information->ROMAddress = 0;
/* nic.rom_info->rom_segment; */
/* We only provide the ability to receive or transmit a single
* packet at a time. This is a bootloader, not an OS.
*/
undi_get_information->RxBufCt = 1;
undi_get_information->TxBufCt = 1;
undi_get_information->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
/* PXENV_UNDI_GET_STATISTICS
*
* Status: won't implement (would require driver API changes for no
* real benefit)
*/
PXENV_EXIT_t pxenv_undi_get_statistics ( t_PXENV_UNDI_GET_STATISTICS
*undi_get_statistics ) {
DBG ( "PXENV_UNDI_GET_STATISTICS" );
/* ENSURE_READY ( undi_get_statistics ); */
undi_get_statistics->Status = PXENV_STATUS_UNSUPPORTED;
return PXENV_EXIT_FAILURE;
}
/* PXENV_UNDI_CLEAR_STATISTICS
*
* Status: won't implement (would require driver API changes for no
* real benefit)
*/
PXENV_EXIT_t pxenv_undi_clear_statistics ( t_PXENV_UNDI_CLEAR_STATISTICS
*undi_clear_statistics ) {
DBG ( "PXENV_UNDI_CLEAR_STATISTICS" );
/* ENSURE_READY ( undi_clear_statistics ); */
undi_clear_statistics->Status = PXENV_STATUS_UNSUPPORTED;
return PXENV_EXIT_FAILURE;
}
/* PXENV_UNDI_INITIATE_DIAGS
*
* Status: won't implement (would require driver API changes for no
* real benefit)
*/
PXENV_EXIT_t pxenv_undi_initiate_diags ( t_PXENV_UNDI_INITIATE_DIAGS
*undi_initiate_diags ) {
DBG ( "PXENV_UNDI_INITIATE_DIAGS" );
/* ENSURE_READY ( undi_initiate_diags ); */
undi_initiate_diags->Status = PXENV_STATUS_UNSUPPORTED;
return PXENV_EXIT_FAILURE;
}
/* PXENV_UNDI_FORCE_INTERRUPT
*
* Status: working
*/
PXENV_EXIT_t pxenv_undi_force_interrupt ( t_PXENV_UNDI_FORCE_INTERRUPT
*undi_force_interrupt ) {
DBG ( "PXENV_UNDI_FORCE_INTERRUPT" );
ENSURE_READY ( undi_force_interrupt );
eth_irq ( FORCE );
undi_force_interrupt->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
/* PXENV_UNDI_GET_MCAST_ADDRESS
*
* Status: stub (no PXE multicast support)
*/
PXENV_EXIT_t pxenv_undi_get_mcast_address ( t_PXENV_UNDI_GET_MCAST_ADDRESS
*undi_get_mcast_address ) {
DBG ( "PXENV_UNDI_GET_MCAST_ADDRESS" );
/* ENSURE_READY ( undi_get_mcast_address ); */
undi_get_mcast_address->Status = PXENV_STATUS_UNSUPPORTED;
return PXENV_EXIT_FAILURE;
}
/* PXENV_UNDI_GET_NIC_TYPE
*
* Status: working
*/
PXENV_EXIT_t pxenv_undi_get_nic_type ( t_PXENV_UNDI_GET_NIC_TYPE
*undi_get_nic_type ) {
#warning "device probing mechanism has changed completely"
#if 0
struct dev *dev = &dev;
DBG ( "PXENV_UNDI_GET_NIC_TYPE" );
ENSURE_READY ( undi_get_nic_type );
if ( dev->to_probe == PROBE_PCI ) {
struct pci_device *pci = &dev->state.pci.dev;
undi_get_nic_type->NicType = PCI_NIC;
undi_get_nic_type->info.pci.Vendor_ID = pci->vendor;
undi_get_nic_type->info.pci.Dev_ID = pci->dev_id;
undi_get_nic_type->info.pci.Base_Class = pci->class >> 8;
undi_get_nic_type->info.pci.Sub_Class = pci->class & 0xff;
undi_get_nic_type->info.pci.BusDevFunc =
( pci->bus << 8 ) | pci->devfn;
/* Cheat: these fields are probably unnecessary, and
* would require adding extra code to pci.c.
*/
undi_get_nic_type->info.pci.Prog_Intf = 0;
undi_get_nic_type->info.pci.Rev = 0;
undi_get_nic_type->info.pci.SubVendor_ID = 0xffff;
undi_get_nic_type->info.pci.SubDevice_ID = 0xffff;
} else if ( dev->to_probe == PROBE_ISA ) {
/* const struct isa_driver *isa = dev->state.isa.driver; */
undi_get_nic_type->NicType = PnP_NIC;
/* Don't think anything fills these fields in, and
* probably no-one will ever be interested in them.
*/
undi_get_nic_type->info.pnp.EISA_Dev_ID = 0;
undi_get_nic_type->info.pnp.Base_Class = 0;
undi_get_nic_type->info.pnp.Sub_Class = 0;
undi_get_nic_type->info.pnp.Prog_Intf = 0;
undi_get_nic_type->info.pnp.CardSelNum = 0;
} else {
/* PXESPEC: There doesn't seem to be an "unknown type"
* defined.
*/
undi_get_nic_type->NicType = 0;
}
undi_get_nic_type->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
#endif
}
/* PXENV_UNDI_GET_IFACE_INFO
*
* Status: working
*/
PXENV_EXIT_t pxenv_undi_get_iface_info ( t_PXENV_UNDI_GET_IFACE_INFO
*undi_get_iface_info ) {
DBG ( "PXENV_UNDI_GET_IFACE_INFO" );
ENSURE_READY ( undi_get_iface_info );
/* Just hand back some info, doesn't really matter what it is.
* Most PXE stacks seem to take this approach.
*/
sprintf ( undi_get_iface_info->IfaceType, "Etherboot" );
undi_get_iface_info->LinkSpeed = 10000000; /* 10 Mbps */
undi_get_iface_info->ServiceFlags = 0;
memset ( undi_get_iface_info->Reserved, 0,
sizeof(undi_get_iface_info->Reserved) );
undi_get_iface_info->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
/* PXENV_UNDI_ISR
*
* Status: working
*/
PXENV_EXIT_t pxenv_undi_isr ( t_PXENV_UNDI_ISR *undi_isr ) {
media_header_t *media_header = (media_header_t*)nic.packet;
DBG ( "PXENV_UNDI_ISR" );
/* We can't call ENSURE_READY, because this could be being
* called as part of an interrupt service routine. Instead,
* we should simply die if we're not READY.
*/
if ( ( pxe_stack == NULL ) || ( pxe_stack->state < READY ) ) {
undi_isr->Status = PXENV_STATUS_UNDI_INVALID_STATE;
return PXENV_EXIT_FAILURE;
}
/* Just in case some idiot actually looks at these fields when
* we weren't meant to fill them in...
*/
undi_isr->BufferLength = 0;
undi_isr->FrameLength = 0;
undi_isr->FrameHeaderLength = 0;
undi_isr->ProtType = 0;
undi_isr->PktType = 0;
switch ( undi_isr->FuncFlag ) {
case PXENV_UNDI_ISR_IN_START :
/* Is there a packet waiting? If so, disable
* interrupts on the NIC and return "it's ours". Do
* *not* necessarily acknowledge the interrupt; this
* can happen later when eth_poll(1) is called. As
* long as the interrupt is masked off so that it
* doesn't immediately retrigger the 8259A then all
* should be well.
*/
DBG ( " START" );
if ( eth_poll ( 0 ) ) {
DBG ( " OURS" );
eth_irq ( DISABLE );
undi_isr->FuncFlag = PXENV_UNDI_ISR_OUT_OURS;
} else {
DBG ( " NOT_OURS" );
undi_isr->FuncFlag = PXENV_UNDI_ISR_OUT_NOT_OURS;
}
break;
case PXENV_UNDI_ISR_IN_PROCESS :
/* Call poll(), return packet. If no packet, return "done".
*/
DBG ( " PROCESS" );
if ( eth_poll ( 1 ) ) {
DBG ( " RECEIVE %d", nic.packetlen );
if ( nic.packetlen > sizeof(pxe_stack->packet) ) {
/* Should never happen */
undi_isr->FuncFlag = PXENV_UNDI_ISR_OUT_DONE;
undi_isr->Status =
PXENV_STATUS_OUT_OF_RESOURCES;
return PXENV_EXIT_FAILURE;
}
undi_isr->FuncFlag = PXENV_UNDI_ISR_OUT_RECEIVE;
undi_isr->BufferLength = nic.packetlen;
undi_isr->FrameLength = nic.packetlen;
undi_isr->FrameHeaderLength = ETH_HLEN;
memcpy ( pxe_stack->packet, nic.packet, nic.packetlen);
PTR_TO_SEGOFF16 ( pxe_stack->packet, undi_isr->Frame );
switch ( ntohs(media_header->nstype) ) {
case IP : undi_isr->ProtType = P_IP; break;
case ARP : undi_isr->ProtType = P_ARP; break;
case RARP : undi_isr->ProtType = P_RARP; break;
default : undi_isr->ProtType = P_UNKNOWN;
}
if ( memcmp ( media_header->dest, broadcast_mac,
sizeof(broadcast_mac) ) ) {
undi_isr->PktType = XMT_BROADCAST;
} else {
undi_isr->PktType = XMT_DESTADDR;
}
break;
} else {
/* No break - fall through to IN_GET_NEXT */
}
case PXENV_UNDI_ISR_IN_GET_NEXT :
/* We only ever return one frame at a time */
DBG ( " GET_NEXT DONE" );
/* Re-enable interrupts */
eth_irq ( ENABLE );
/* Force an interrupt if there's a packet still
* waiting, since we only handle one packet per
* interrupt.
*/
if ( eth_poll ( 0 ) ) {
DBG ( " (RETRIGGER)" );
eth_irq ( FORCE );
}
undi_isr->FuncFlag = PXENV_UNDI_ISR_OUT_DONE;
break;
default :
/* Should never happen */
undi_isr->FuncFlag = PXENV_UNDI_ISR_OUT_DONE;
undi_isr->Status = PXENV_STATUS_UNDI_INVALID_PARAMETER;
return PXENV_EXIT_FAILURE;
}
undi_isr->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
/* PXENV_STOP_UNDI
*
* Status: working
*/
PXENV_EXIT_t pxenv_stop_undi ( t_PXENV_STOP_UNDI *stop_undi ) {
DBG ( "PXENV_STOP_UNDI" );
if ( ! ensure_pxe_state(CAN_UNLOAD) ) {
stop_undi->Status = PXENV_STATUS_KEEP_UNDI;
return PXENV_EXIT_FAILURE;
}
stop_undi->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
/* PXENV_TFTP_OPEN
*
* Status: working
*/
PXENV_EXIT_t pxenv_tftp_open ( t_PXENV_TFTP_OPEN *tftp_open ) {
struct tftpreq_info_t request;
struct tftpblk_info_t block;
DBG ( "PXENV_TFTP_OPEN" );
ENSURE_READY ( tftp_open );
/* Change server address if different */
if ( tftp_open->ServerIPAddress &&
tftp_open->ServerIPAddress!=arptable[ARP_SERVER].ipaddr.s_addr ) {
memset(arptable[ARP_SERVER].node, 0, ETH_ALEN ); /* kill arp */
arptable[ARP_SERVER].ipaddr.s_addr=tftp_open->ServerIPAddress;
}
/* Ignore gateway address; we can route properly */
/* Fill in request structure */
request.name = tftp_open->FileName;
request.port = ntohs(tftp_open->TFTPPort);
#ifdef WORK_AROUND_BPBATCH_BUG
/* Force use of port 69; BpBatch tries to use port 4 for some
* bizarre reason. */
request.port = TFTP_PORT;
#endif
request.blksize = tftp_open->PacketSize;
DBG ( " %@:%d/%s (%d)", tftp_open->ServerIPAddress,
request.port, request.name, request.blksize );
if ( !request.blksize ) request.blksize = TFTP_DEFAULTSIZE_PACKET;
/* Make request and get first packet */
if ( !tftp_block ( &request, &block ) ) {
tftp_open->Status = PXENV_STATUS_TFTP_FILE_NOT_FOUND;
return PXENV_EXIT_FAILURE;
}
/* Fill in PacketSize */
tftp_open->PacketSize = request.blksize;
/* Store first block for later retrieval by TFTP_READ */
pxe_stack->tftpdata.magic_cookie = PXE_TFTP_MAGIC_COOKIE;
pxe_stack->tftpdata.len = block.len;
pxe_stack->tftpdata.eof = block.eof;
memcpy ( pxe_stack->tftpdata.data, block.data, block.len );
tftp_open->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
/* PXENV_TFTP_CLOSE
*
* Status: working
*/
PXENV_EXIT_t pxenv_tftp_close ( t_PXENV_TFTP_CLOSE *tftp_close ) {
DBG ( "PXENV_TFTP_CLOSE" );
ENSURE_READY ( tftp_close );
tftp_close->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
/* PXENV_TFTP_READ
*
* Status: working
*/
PXENV_EXIT_t pxenv_tftp_read ( t_PXENV_TFTP_READ *tftp_read ) {
struct tftpblk_info_t block;
DBG ( "PXENV_TFTP_READ" );
ENSURE_READY ( tftp_read );
/* Do we have a block pending */
if ( pxe_stack->tftpdata.magic_cookie == PXE_TFTP_MAGIC_COOKIE ) {
block.data = pxe_stack->tftpdata.data;
block.len = pxe_stack->tftpdata.len;
block.eof = pxe_stack->tftpdata.eof;
block.block = 1; /* Will be the first block */
pxe_stack->tftpdata.magic_cookie = 0;
} else {
if ( !tftp_block ( NULL, &block ) ) {
tftp_read->Status = PXENV_STATUS_TFTP_FILE_NOT_FOUND;
return PXENV_EXIT_FAILURE;
}
}
/* Return data */
tftp_read->PacketNumber = block.block;
tftp_read->BufferSize = block.len;
memcpy ( SEGOFF16_TO_PTR(tftp_read->Buffer), block.data, block.len );
DBG ( " %d to %hx:%hx", block.len, tftp_read->Buffer.segment,
tftp_read->Buffer.offset );
tftp_read->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
/* PXENV_TFTP_READ_FILE
*
* Status: working
*/
int pxe_tftp_read_block ( unsigned char *data, unsigned int block __unused, unsigned int len, int eof ) {
if ( pxe_stack->readfile.buffer ) {
if ( pxe_stack->readfile.offset + len >=
pxe_stack->readfile.bufferlen ) return -1;
memcpy ( pxe_stack->readfile.buffer +
pxe_stack->readfile.offset, data, len );
}
pxe_stack->readfile.offset += len;
return eof ? 0 : 1;
}
PXENV_EXIT_t pxenv_tftp_read_file ( t_PXENV_TFTP_READ_FILE *tftp_read_file ) {
int rc;
DBG ( "PXENV_TFTP_READ_FILE %s to [%x,%x)", tftp_read_file->FileName,
tftp_read_file->Buffer, tftp_read_file->Buffer + tftp_read_file->BufferSize );
ENSURE_READY ( tftp_read_file );
/* inserted by Klaus Wittemeier */
/* KERNEL_BUF stores the name of the last required file */
/* This is a fix to make Microsoft Remote Install Services work (RIS) */
memcpy(KERNEL_BUF, tftp_read_file->FileName, sizeof(KERNEL_BUF));
/* end of insertion */
pxe_stack->readfile.buffer = phys_to_virt ( tftp_read_file->Buffer );
pxe_stack->readfile.bufferlen = tftp_read_file->BufferSize;
pxe_stack->readfile.offset = 0;
rc = tftp ( tftp_read_file->FileName, pxe_tftp_read_block );
if ( rc ) {
tftp_read_file->Status = PXENV_STATUS_FAILURE;
return PXENV_EXIT_FAILURE;
}
tftp_read_file->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
/* PXENV_TFTP_GET_FSIZE
*
* Status: working, though ugly (we actually read the whole file,
* because it's too ugly to make Etherboot request the tsize option
* and hand it to us).
*/
PXENV_EXIT_t pxenv_tftp_get_fsize ( t_PXENV_TFTP_GET_FSIZE *tftp_get_fsize ) {
int rc;
DBG ( "PXENV_TFTP_GET_FSIZE" );
ENSURE_READY ( tftp_get_fsize );
pxe_stack->readfile.buffer = NULL;
pxe_stack->readfile.bufferlen = 0;
pxe_stack->readfile.offset = 0;
rc = tftp ( tftp_get_fsize->FileName, pxe_tftp_read_block );
if ( rc ) {
tftp_get_fsize->FileSize = 0;
tftp_get_fsize->Status = PXENV_STATUS_FAILURE;
return PXENV_EXIT_FAILURE;
}
tftp_get_fsize->FileSize = pxe_stack->readfile.offset;
tftp_get_fsize->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
/* PXENV_UDP_OPEN
*
* Status: working
*/
PXENV_EXIT_t pxenv_udp_open ( t_PXENV_UDP_OPEN *udp_open ) {
DBG ( "PXENV_UDP_OPEN" );
ENSURE_READY ( udp_open );
if ( udp_open->src_ip &&
udp_open->src_ip != arptable[ARP_CLIENT].ipaddr.s_addr ) {
/* Overwrite our IP address */
DBG ( " with new IP %@", udp_open->src_ip );
arptable[ARP_CLIENT].ipaddr.s_addr = udp_open->src_ip;
}
udp_open->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
/* PXENV_UDP_CLOSE
*
* Status: working
*/
PXENV_EXIT_t pxenv_udp_close ( t_PXENV_UDP_CLOSE *udp_close ) {
DBG ( "PXENV_UDP_CLOSE" );
ENSURE_READY ( udp_close );
udp_close->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
/* PXENV_UDP_READ
*
* Status: working
*/
int await_pxe_udp ( int ival __unused, void *ptr,
unsigned short ptype __unused,
struct iphdr *ip, struct udphdr *udp,
struct tcphdr *tcp __unused ) {
t_PXENV_UDP_READ *udp_read = (t_PXENV_UDP_READ*)ptr;
uint16_t d_port;
size_t size;
/* Ignore non-UDP packets */
if ( !udp ) {
DBG ( " non-UDP" );
return 0;
}
/* Check dest_ip */
if ( udp_read->dest_ip && ( udp_read->dest_ip != ip->dest.s_addr ) ) {
DBG ( " wrong dest IP (got %@, wanted %@)",
ip->dest.s_addr, udp_read->dest_ip );
return 0;
}
/* Check dest_port */
d_port = ntohs ( udp_read->d_port );
if ( d_port && ( d_port != ntohs(udp->dest) ) ) {
DBG ( " wrong dest port (got %d, wanted %d)",
ntohs(udp->dest), d_port );
return 0;
}
/* Copy packet to buffer and fill in information */
udp_read->src_ip = ip->src.s_addr;
udp_read->s_port = udp->src; /* Both in network order */
size = ntohs(udp->len) - sizeof(*udp);
/* Workaround: NTLDR expects us to fill these in, even though
* PXESPEC clearly defines them as input parameters.
*/
udp_read->dest_ip = ip->dest.s_addr;
udp_read->d_port = udp->dest;
DBG ( " %@:%d->%@:%d (%d)",
udp_read->src_ip, ntohs(udp_read->s_port),
udp_read->dest_ip, ntohs(udp_read->d_port), size );
if ( udp_read->buffer_size < size ) {
/* PXESPEC: what error code should we actually return? */
DBG ( " buffer too small (%d)", udp_read->buffer_size );
udp_read->Status = PXENV_STATUS_OUT_OF_RESOURCES;
return 0;
}
memcpy ( SEGOFF16_TO_PTR ( udp_read->buffer ), &udp->payload, size );
udp_read->buffer_size = size;
return 1;
}
PXENV_EXIT_t pxenv_udp_read ( t_PXENV_UDP_READ *udp_read ) {
DBG ( "PXENV_UDP_READ" );
ENSURE_READY ( udp_read );
/* Use await_reply with a timeout of zero */
/* Allow await_reply to change Status if necessary */
udp_read->Status = PXENV_STATUS_FAILURE;
if ( ! await_reply ( await_pxe_udp, 0, udp_read, 0 ) ) {
return PXENV_EXIT_FAILURE;
}
udp_read->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
/* PXENV_UDP_WRITE
*
* Status: working
*/
PXENV_EXIT_t pxenv_udp_write ( t_PXENV_UDP_WRITE *udp_write ) {
uint16_t src_port;
uint16_t dst_port;
struct udppacket *packet = (struct udppacket *)nic.packet;
int packet_size;
DBG ( "PXENV_UDP_WRITE" );
ENSURE_READY ( udp_write );
/* PXE spec says source port is 2069 if not specified */
src_port = ntohs(udp_write->src_port);
if ( src_port == 0 ) src_port = 2069;
dst_port = ntohs(udp_write->dst_port);
DBG ( " %d->%@:%d (%d)", src_port, udp_write->ip, dst_port,
udp_write->buffer_size );
/* FIXME: we ignore the gateway specified, since we're
* confident of being able to do our own routing. We should
* probably allow for multiple gateways.
*/
/* Copy payload to packet buffer */
packet_size = ( (void*)&packet->payload - (void*)packet )
+ udp_write->buffer_size;
if ( packet_size > ETH_FRAME_LEN ) {
udp_write->Status = PXENV_STATUS_OUT_OF_RESOURCES;
return PXENV_EXIT_FAILURE;
}
memcpy ( &packet->payload, SEGOFF16_TO_PTR(udp_write->buffer),
udp_write->buffer_size );
/* Transmit packet */
if ( ! udp_transmit ( udp_write->ip, src_port, dst_port,
packet_size, packet ) ) {
udp_write->Status = PXENV_STATUS_FAILURE;
return PXENV_EXIT_FAILURE;
}
udp_write->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
/* PXENV_UNLOAD_STACK
*
* Status: working
*/
PXENV_EXIT_t pxenv_unload_stack ( t_PXENV_UNLOAD_STACK *unload_stack ) {
int success;
DBG ( "PXENV_UNLOAD_STACK" );
success = ensure_pxe_state ( CAN_UNLOAD );
/* We need to call cleanup() at some point. The network card
* has already been disabled by ENSURE_CAN_UNLOAD(), but for
* the sake of completeness we should call the console_fini()
* etc. that are part of cleanup().
*
* There seems to be a lack of consensus on which is the final
* PXE API call to make, but it's a fairly safe bet that all
* the potential shutdown sequences will include a call to
* PXENV_UNLOAD_STACK at some point, so we may as well do it
* here.
*/
cleanup();
if ( ! success ) {
unload_stack->Status = PXENV_STATUS_KEEP_ALL;
return PXENV_EXIT_FAILURE;
}
unload_stack->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
/* PXENV_GET_CACHED_INFO
*
* Status: working
*/
PXENV_EXIT_t pxenv_get_cached_info ( t_PXENV_GET_CACHED_INFO
*get_cached_info ) {
BOOTPLAYER *cached_info = &pxe_stack->cached_info;
DBG ( "PXENV_GET_CACHED_INFO %d", get_cached_info->PacketType );
ENSURE_READY ( get_cached_info );
/* Fill in cached_info structure in our pxe_stack */
/* I don't think there's actually any way we can be called in
* the middle of a DHCP request...
*/
cached_info->opcode = BOOTP_REP;
/* We only have Ethernet drivers */
cached_info->Hardware = ETHER_TYPE;
cached_info->Hardlen = ETH_ALEN;
/* PXESPEC: "Client sets" says the spec, but who's filling in
* this structure? It ain't the client.
*/
cached_info->Gatehops = 0;
cached_info->ident = 0;
cached_info->seconds = 0;
cached_info->Flags = BOOTP_BCAST;
/* PXESPEC: What do 'Client' and 'Your' IP address refer to? */
cached_info->cip = arptable[ARP_CLIENT].ipaddr.s_addr;
cached_info->yip = arptable[ARP_CLIENT].ipaddr.s_addr;
cached_info->sip = arptable[ARP_SERVER].ipaddr.s_addr;
/* PXESPEC: Does "GIP" mean "Gateway" or "Relay agent"? */
cached_info->gip = arptable[ARP_GATEWAY].ipaddr.s_addr;
memcpy ( cached_info->CAddr, arptable[ARP_CLIENT].node, ETH_ALEN );
/* Nullify server name */
cached_info->Sname[0] = '\0';
memcpy ( cached_info->bootfile, KERNEL_BUF,
sizeof(cached_info->bootfile) );
/* Copy DHCP vendor options */
memcpy ( &cached_info->vendor.d, BOOTP_DATA_ADDR->bootp_reply.bp_vend,
sizeof(cached_info->vendor.d) );
/* Copy to user-specified buffer, or set pointer to our buffer */
get_cached_info->BufferLimit = sizeof(*cached_info);
/* PXESPEC: says to test for Buffer == NULL *and* BufferSize =
* 0, but what are we supposed to do with a null buffer of
* non-zero size?!
*/
if ( IS_NULL_SEGOFF16 ( get_cached_info->Buffer ) ) {
/* Point back to our buffer */
PTR_TO_SEGOFF16 ( cached_info, get_cached_info->Buffer );
get_cached_info->BufferSize = sizeof(*cached_info);
} else {
/* Copy to user buffer */
size_t size = sizeof(*cached_info);
void *buffer = SEGOFF16_TO_PTR ( get_cached_info->Buffer );
if ( get_cached_info->BufferSize < size )
size = get_cached_info->BufferSize;
DBG ( " to %x", virt_to_phys ( buffer ) );
memcpy ( buffer, cached_info, size );
/* PXESPEC: Should we return an error if the user
* buffer is too small? We do return the actual size
* of the buffer via BufferLimit, so the user does
* have a way to detect this already.
*/
}
get_cached_info->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
/* PXENV_RESTART_TFTP
*
* Status: working
*/
PXENV_EXIT_t pxenv_restart_tftp ( t_PXENV_RESTART_TFTP *restart_tftp ) {
PXENV_EXIT_t tftp_exit;
DBG ( "PXENV_RESTART_TFTP" );
ENSURE_READY ( restart_tftp );
/* Words cannot describe the complete mismatch between the PXE
* specification and any possible version of reality...
*/
restart_tftp->Buffer = PXE_LOAD_ADDRESS; /* Fixed by spec, apparently */
restart_tftp->BufferSize = get_free_base_memory() - PXE_LOAD_ADDRESS; /* Near enough */
DBG ( "(" );
tftp_exit = pxe_api_call ( PXENV_TFTP_READ_FILE, (t_PXENV_ANY*)restart_tftp );
DBG ( ")" );
if ( tftp_exit != PXENV_EXIT_SUCCESS ) return tftp_exit;
/* Fire up the new NBP */
restart_tftp->Status = xstartpxe();
/* Not sure what "SUCCESS" actually means, since we can only
* return if the new NBP failed to boot...
*/
return PXENV_EXIT_SUCCESS;
}
/* PXENV_START_BASE
*
* Status: won't implement (requires major structural changes)
*/
PXENV_EXIT_t pxenv_start_base ( t_PXENV_START_BASE *start_base ) {
DBG ( "PXENV_START_BASE" );
/* ENSURE_READY ( start_base ); */
start_base->Status = PXENV_STATUS_UNSUPPORTED;
return PXENV_EXIT_FAILURE;
}
/* PXENV_STOP_BASE
*
* Status: working
*/
PXENV_EXIT_t pxenv_stop_base ( t_PXENV_STOP_BASE *stop_base ) {
DBG ( "PXENV_STOP_BASE" );
/* The only time we will be called is when the NBP is trying
* to shut down the PXE stack. There's nothing we need to do
* in this call.
*/
stop_base->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
/* PXENV_UNDI_LOADER
*
* Status: working
*
* NOTE: This is not a genuine PXE API call; the loader has a separate
* entry point. However, to simplify the mapping of the PXE API to
* the internal Etherboot API, both are directed through the same
* interface.
*/
PXENV_EXIT_t pxenv_undi_loader ( undi_loader_t *loader ) {
uint32_t loader_phys = virt_to_phys ( loader );
DBG ( "PXENV_UNDI_LOADER" );
/* Set UNDI DS as our real-mode stack */
use_undi_ds_for_rm_stack ( loader->undi_ds );
/* FIXME: These lines are borrowed from main.c. There should
* probably be a single initialise() function that does all
* this, but it's currently split interestingly between main()
* and main_loop()...
*/
/* CHECKME: Our init functions have probably already been
called by the ROM prefix's call to setup(), haven't
they? */
/* We have relocated; the loader pointer is now invalid */
loader = phys_to_virt ( loader_phys );
/* Install PXE stack to area specified by NBP */
install_pxe_stack ( VIRTUAL ( loader->undi_cs, 0 ) );
/* Call pxenv_start_undi to set parameters. Why the hell PXE
* requires these parameters to be provided twice is beyond
* the wit of any sane man. Don't worry if it fails; the NBP
* should call PXENV_START_UNDI separately anyway.
*/
pxenv_start_undi ( &loader->start_undi );
/* Unhook stack; the loader is not meant to hook int 1a etc,
* but the call the pxenv_start_undi will cause it to happen.
*/
ENSURE_CAN_UNLOAD ( loader );
/* Fill in addresses of !PXE and PXENV+ structures */
PTR_TO_SEGOFF16 ( &pxe_stack->pxe, loader->pxe_ptr );
PTR_TO_SEGOFF16 ( &pxe_stack->pxenv, loader->pxenv_ptr );
loader->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
/* API call dispatcher
*
* Status: complete
*/
PXENV_EXIT_t pxe_api_call ( int opcode, t_PXENV_ANY *params ) {
PXENV_EXIT_t ret = PXENV_EXIT_FAILURE;
/* Set default status in case child routine fails to do so */
params->Status = PXENV_STATUS_FAILURE;
DBG ( "[" );
/* Hand off to relevant API routine */
switch ( opcode ) {
case PXENV_START_UNDI:
ret = pxenv_start_undi ( ¶ms->start_undi );
break;
case PXENV_UNDI_STARTUP:
ret = pxenv_undi_startup ( ¶ms->undi_startup );
break;
case PXENV_UNDI_CLEANUP:
ret = pxenv_undi_cleanup ( ¶ms->undi_cleanup );
break;
case PXENV_UNDI_INITIALIZE:
ret = pxenv_undi_initialize ( ¶ms->undi_initialize );
break;
case PXENV_UNDI_RESET_ADAPTER:
ret = pxenv_undi_reset_adapter ( ¶ms->undi_reset_adapter );
break;
case PXENV_UNDI_SHUTDOWN:
ret = pxenv_undi_shutdown ( ¶ms->undi_shutdown );
break;
case PXENV_UNDI_OPEN:
ret = pxenv_undi_open ( ¶ms->undi_open );
break;
case PXENV_UNDI_CLOSE:
ret = pxenv_undi_close ( ¶ms->undi_close );
break;
case PXENV_UNDI_TRANSMIT:
ret = pxenv_undi_transmit ( ¶ms->undi_transmit );
break;
case PXENV_UNDI_SET_MCAST_ADDRESS:
ret = pxenv_undi_set_mcast_address (
¶ms->undi_set_mcast_address );
break;
case PXENV_UNDI_SET_STATION_ADDRESS:
ret = pxenv_undi_set_station_address (
¶ms->undi_set_station_address );
break;
case PXENV_UNDI_SET_PACKET_FILTER:
ret = pxenv_undi_set_packet_filter (
¶ms->undi_set_packet_filter );
break;
case PXENV_UNDI_GET_INFORMATION:
ret = pxenv_undi_get_information (
¶ms->undi_get_information );
break;
case PXENV_UNDI_GET_STATISTICS:
ret = pxenv_undi_get_statistics (
¶ms->undi_get_statistics );
break;
case PXENV_UNDI_CLEAR_STATISTICS:
ret = pxenv_undi_clear_statistics (
¶ms->undi_clear_statistics );
break;
case PXENV_UNDI_INITIATE_DIAGS:
ret = pxenv_undi_initiate_diags (
¶ms->undi_initiate_diags );
break;
case PXENV_UNDI_FORCE_INTERRUPT:
ret = pxenv_undi_force_interrupt (
¶ms->undi_force_interrupt );
break;
case PXENV_UNDI_GET_MCAST_ADDRESS:
ret = pxenv_undi_get_mcast_address (
¶ms->undi_get_mcast_address );
break;
case PXENV_UNDI_GET_NIC_TYPE:
ret = pxenv_undi_get_nic_type ( ¶ms->undi_get_nic_type );
break;
case PXENV_UNDI_GET_IFACE_INFO:
ret = pxenv_undi_get_iface_info (
¶ms->undi_get_iface_info );
break;
case PXENV_UNDI_ISR:
ret = pxenv_undi_isr ( ¶ms->undi_isr );
break;
case PXENV_STOP_UNDI:
ret = pxenv_stop_undi ( ¶ms->stop_undi );
break;
case PXENV_TFTP_OPEN:
ret = pxenv_tftp_open ( ¶ms->tftp_open );
break;
case PXENV_TFTP_CLOSE:
ret = pxenv_tftp_close ( ¶ms->tftp_close );
break;
case PXENV_TFTP_READ:
ret = pxenv_tftp_read ( ¶ms->tftp_read );
break;
case PXENV_TFTP_READ_FILE:
ret = pxenv_tftp_read_file ( ¶ms->tftp_read_file );
break;
case PXENV_TFTP_GET_FSIZE:
ret = pxenv_tftp_get_fsize ( ¶ms->tftp_get_fsize );
break;
case PXENV_UDP_OPEN:
ret = pxenv_udp_open ( ¶ms->udp_open );
break;
case PXENV_UDP_CLOSE:
ret = pxenv_udp_close ( ¶ms->udp_close );
break;
case PXENV_UDP_READ:
ret = pxenv_udp_read ( ¶ms->udp_read );
break;
case PXENV_UDP_WRITE:
ret = pxenv_udp_write ( ¶ms->udp_write );
break;
case PXENV_UNLOAD_STACK:
ret = pxenv_unload_stack ( ¶ms->unload_stack );
break;
case PXENV_GET_CACHED_INFO:
ret = pxenv_get_cached_info ( ¶ms->get_cached_info );
break;
case PXENV_RESTART_TFTP:
ret = pxenv_restart_tftp ( ¶ms->restart_tftp );
break;
case PXENV_START_BASE:
ret = pxenv_start_base ( ¶ms->start_base );
break;
case PXENV_STOP_BASE:
ret = pxenv_stop_base ( ¶ms->stop_base );
break;
case PXENV_UNDI_LOADER:
ret = pxenv_undi_loader ( ¶ms->loader );
break;
default:
DBG ( "PXENV_UNKNOWN_%hx", opcode );
params->Status = PXENV_STATUS_UNSUPPORTED;
ret = PXENV_EXIT_FAILURE;
break;
}
if ( params->Status != PXENV_STATUS_SUCCESS ) {
DBG ( " %hx", params->Status );
}
if ( ret != PXENV_EXIT_SUCCESS ) {
DBG ( ret == PXENV_EXIT_FAILURE ? " err" : " ??" );
}
DBG ( "]" );
return ret;
}
#endif /* PXE_EXPORT */
