/*
* Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
* Copyright (c) 2004-2005 Atheros Communications, Inc.
* Copyright (c) 2006 Devicescape Software, Inc.
* Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
* Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
*
* Modified for iPXE, July 2009, by Joshua Oreman <oremanj@rwcr.net>
* Original from Linux kernel 2.6.30.
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
* redistribution must be conditioned upon including a substantially
* similar Disclaimer requirement for further binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
* AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
* THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
* IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGES.
*
*/
FILE_LICENCE ( BSD3 );
#include <stdlib.h>
#include <ipxe/malloc.h>
#include <ipxe/timer.h>
#include <ipxe/netdevice.h>
#include <ipxe/pci.h>
#include <ipxe/pci_io.h>
#include "base.h"
#include "reg.h"
#define ATH5K_CALIB_INTERVAL 10 /* Calibrate PHY every 10 seconds */
#define ATH5K_RETRIES 4 /* Number of times to retry packet sends */
#define ATH5K_DESC_ALIGN 16 /* Alignment for TX/RX descriptors */
/******************\
* Internal defines *
\******************/
/* Known PCI ids */
static struct pci_device_id ath5k_nics[] = {
PCI_ROM(0x10b7, 0x0013, "rdag675", "3com 3CRDAG675", AR5K_AR5212),
PCI_ROM(0x168c, 0x0007, "ath5210", "Atheros 5210", AR5K_AR5210),
PCI_ROM(0x168c, 0x0011, "ath5311", "Atheros 5311 (AHB)", AR5K_AR5211),
PCI_ROM(0x168c, 0x0012, "ath5211", "Atheros 5211", AR5K_AR5211),
PCI_ROM(0x168c, 0x0013, "ath5212", "Atheros 5212", AR5K_AR5212),
PCI_ROM(0x168c, 0x0014, "ath5212x14", "Atheros 5212 x14", AR5K_AR5212),
PCI_ROM(0x168c, 0x0015, "ath5212x15", "Atheros 5212 x15", AR5K_AR5212),
PCI_ROM(0x168c, 0x0016, "ath5212x16", "Atheros 5212 x16", AR5K_AR5212),
PCI_ROM(0x168c, 0x0017, "ath5212x17", "Atheros 5212 x17", AR5K_AR5212),
PCI_ROM(0x168c, 0x0018, "ath5212x18", "Atheros 5212 x18", AR5K_AR5212),
PCI_ROM(0x168c, 0x0019, "ath5212x19", "Atheros 5212 x19", AR5K_AR5212),
PCI_ROM(0x168c, 0x001a, "ath2413", "Atheros 2413 Griffin", AR5K_AR5212),
PCI_ROM(0x168c, 0x001b, "ath5413", "Atheros 5413 Eagle", AR5K_AR5212),
PCI_ROM(0x168c, 0x001c, "ath5212e", "Atheros 5212 PCI-E", AR5K_AR5212),
PCI_ROM(0x168c, 0x001d, "ath2417", "Atheros 2417 Nala", AR5K_AR5212),
PCI_ROM(0x168c, 0x0207, "ath5210e", "Atheros 5210 early", AR5K_AR5210),
PCI_ROM(0x168c, 0x1014, "ath5212m", "Ath 5212 miniPCI", AR5K_AR5212),
PCI_ROM(0xa727, 0x0013, "ath5212c","3com Ath 5212", AR5K_AR5212),
};
#define ATH5K_SPMBL_NO 1
#define ATH5K_SPMBL_YES 2
#define ATH5K_SPMBL_BOTH 3
static const struct {
u16 bitrate;
u8 short_pmbl;
u8 hw_code;
} ath5k_rates[] = {
{ 10, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_1M },
{ 20, ATH5K_SPMBL_NO, ATH5K_RATE_CODE_2M },
{ 55, ATH5K_SPMBL_NO, ATH5K_RATE_CODE_5_5M },
{ 110, ATH5K_SPMBL_NO, ATH5K_RATE_CODE_11M },
{ 60, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_6M },
{ 90, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_9M },
{ 120, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_12M },
{ 180, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_18M },
{ 240, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_24M },
{ 360, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_36M },
{ 480, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_48M },
{ 540, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_54M },
{ 20, ATH5K_SPMBL_YES, ATH5K_RATE_CODE_2M | AR5K_SET_SHORT_PREAMBLE },
{ 55, ATH5K_SPMBL_YES, ATH5K_RATE_CODE_5_5M | AR5K_SET_SHORT_PREAMBLE },
{ 110, ATH5K_SPMBL_YES, ATH5K_RATE_CODE_11M | AR5K_SET_SHORT_PREAMBLE },
{ 0, 0, 0 },
};
#define ATH5K_NR_RATES 15
/*
* Prototypes - PCI stack related functions
*/
static int ath5k_probe(struct pci_device *pdev);
static void ath5k_remove(struct pci_device *pdev);
struct pci_driver ath5k_pci_driver __pci_driver = {
.ids = ath5k_nics,
.id_count = sizeof(ath5k_nics) / sizeof(ath5k_nics[0]),
.probe = ath5k_probe,
.remove = ath5k_remove,
};
/*
* Prototypes - MAC 802.11 stack related functions
*/
static int ath5k_tx(struct net80211_device *dev, struct io_buffer *skb);
static int ath5k_reset(struct ath5k_softc *sc, struct net80211_channel *chan);
static int ath5k_reset_wake(struct ath5k_softc *sc);
static int ath5k_start(struct net80211_device *dev);
static void ath5k_stop(struct net80211_device *dev);
static int ath5k_config(struct net80211_device *dev, int changed);
static void ath5k_poll(struct net80211_device *dev);
static void ath5k_irq(struct net80211_device *dev, int enable);
static struct net80211_device_operations ath5k_ops = {
.open = ath5k_start,
.close = ath5k_stop,
.transmit = ath5k_tx,
.poll = ath5k_poll,
.irq = ath5k_irq,
.config = ath5k_config,
};
/*
* Prototypes - Internal functions
*/
/* Attach detach */
static int ath5k_attach(struct net80211_device *dev);
static void ath5k_detach(struct net80211_device *dev);
/* Channel/mode setup */
static unsigned int ath5k_copy_channels(struct ath5k_hw *ah,
struct net80211_channel *channels,
unsigned int mode,
unsigned int max);
static int ath5k_setup_bands(struct net80211_device *dev);
static int ath5k_chan_set(struct ath5k_softc *sc,
struct net80211_channel *chan);
static void ath5k_setcurmode(struct ath5k_softc *sc,
unsigned int mode);
static void ath5k_mode_setup(struct ath5k_softc *sc);
/* Descriptor setup */
static int ath5k_desc_alloc(struct ath5k_softc *sc);
static void ath5k_desc_free(struct ath5k_softc *sc);
/* Buffers setup */
static int ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf);
static int ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf);
static inline void ath5k_txbuf_free(struct ath5k_softc *sc,
struct ath5k_buf *bf)
{
if (!bf->iob)
return;
net80211_tx_complete(sc->dev, bf->iob, 0, ECANCELED);
bf->iob = NULL;
}
static inline void ath5k_rxbuf_free(struct ath5k_softc *sc __unused,
struct ath5k_buf *bf)
{
free_iob(bf->iob);
bf->iob = NULL;
}
/* Queues setup */
static int ath5k_txq_setup(struct ath5k_softc *sc,
int qtype, int subtype);
static void ath5k_txq_drainq(struct ath5k_softc *sc,
struct ath5k_txq *txq);
static void ath5k_txq_cleanup(struct ath5k_softc *sc);
static void ath5k_txq_release(struct ath5k_softc *sc);
/* Rx handling */
static int ath5k_rx_start(struct ath5k_softc *sc);
static void ath5k_rx_stop(struct ath5k_softc *sc);
/* Tx handling */
static void ath5k_tx_processq(struct ath5k_softc *sc,
struct ath5k_txq *txq);
/* Interrupt handling */
static int ath5k_init(struct ath5k_softc *sc);
static int ath5k_stop_hw(struct ath5k_softc *sc);
static void ath5k_calibrate(struct ath5k_softc *sc);
/* Filter */
static void ath5k_configure_filter(struct ath5k_softc *sc);
/********************\
* PCI Initialization *
\********************/
#if DBGLVL_MAX
static const char *
ath5k_chip_name(enum ath5k_srev_type type, u16 val)
{
const char *name = "xxxxx";
unsigned int i;
for (i = 0; i < ARRAY_SIZE(srev_names); i++) {
if (srev_names[i].sr_type != type)
continue;
if ((val & 0xf0) == srev_names[i].sr_val)
name = srev_names[i].sr_name;
if ((val & 0xff) == srev_names[i].sr_val) {
name = srev_names[i].sr_name;
break;
}
}
return name;
}
#endif
static int ath5k_probe(struct pci_device *pdev)
{
void *mem;
struct ath5k_softc *sc;
struct net80211_device *dev;
int ret;
u8 csz;
adjust_pci_device(pdev);
/*
* Cache line size is used to size and align various
* structures used to communicate with the hardware.
*/
pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
if (csz == 0) {
/*
* We must have this setup properly for rx buffer
* DMA to work so force a reasonable value here if it
* comes up zero.
*/
csz = 16;
pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
}
/*
* The default setting of latency timer yields poor results,
* set it to the value used by other systems. It may be worth
* tweaking this setting more.
*/
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
/*
* Disable the RETRY_TIMEOUT register (0x41) to keep
* PCI Tx retries from interfering with C3 CPU state.
*/
pci_write_config_byte(pdev, 0x41, 0);
mem = pci_ioremap(pdev, pdev->membase, 0x10000);
if (!mem) {
DBG("ath5k: cannot remap PCI memory region\n");
ret = -EIO;
goto err;
}
/*
* Allocate dev (net80211 main struct)
* and dev->priv (driver private data)
*/
dev = net80211_alloc(sizeof(*sc));
if (!dev) {
DBG("ath5k: cannot allocate 802.11 device\n");
ret = -ENOMEM;
goto err_map;
}
/* Initialize driver private data */
sc = dev->priv;
sc->dev = dev;
sc->pdev = pdev;
sc->hwinfo = zalloc(sizeof(*sc->hwinfo));
if (!sc->hwinfo) {
DBG("ath5k: cannot allocate 802.11 hardware info structure\n");
ret = -ENOMEM;
goto err_free;
}
sc->hwinfo->flags = NET80211_HW_RX_HAS_FCS;
sc->hwinfo->signal_type = NET80211_SIGNAL_DB;
sc->hwinfo->signal_max = 40; /* 35dB should give perfect 54Mbps */
sc->hwinfo->channel_change_time = 5000;
/* Avoid working with the device until setup is complete */
sc->status |= ATH_STAT_INVALID;
sc->iobase = mem;
sc->cachelsz = csz * 4; /* convert to bytes */
DBG("ath5k: register base at %p (%08lx)\n", sc->iobase, pdev->membase);
DBG("ath5k: cache line size %d\n", sc->cachelsz);
/* Set private data */
pci_set_drvdata(pdev, dev);
dev->netdev->dev = (struct device *)pdev;
/* Initialize device */
ret = ath5k_hw_attach(sc, pdev->id->driver_data, &sc->ah);
if (ret)
goto err_free_hwinfo;
/* Finish private driver data initialization */
ret = ath5k_attach(dev);
if (ret)
goto err_ah;
#if DBGLVL_MAX
DBG("Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
ath5k_chip_name(AR5K_VERSION_MAC, sc->ah->ah_mac_srev),
sc->ah->ah_mac_srev, sc->ah->ah_phy_revision);
if (!sc->ah->ah_single_chip) {
/* Single chip radio (!RF5111) */
if (sc->ah->ah_radio_5ghz_revision &&
!sc->ah->ah_radio_2ghz_revision) {
/* No 5GHz support -> report 2GHz radio */
if (!(sc->ah->ah_capabilities.cap_mode & AR5K_MODE_BIT_11A)) {
DBG("RF%s 2GHz radio found (0x%x)\n",
ath5k_chip_name(AR5K_VERSION_RAD,
sc->ah->ah_radio_5ghz_revision),
sc->ah->ah_radio_5ghz_revision);
/* No 2GHz support (5110 and some
* 5Ghz only cards) -> report 5Ghz radio */
} else if (!(sc->ah->ah_capabilities.cap_mode & AR5K_MODE_BIT_11B)) {
DBG("RF%s 5GHz radio found (0x%x)\n",
ath5k_chip_name(AR5K_VERSION_RAD,
sc->ah->ah_radio_5ghz_revision),
sc->ah->ah_radio_5ghz_revision);
/* Multiband radio */
} else {
DBG("RF%s multiband radio found (0x%x)\n",
ath5k_chip_name(AR5K_VERSION_RAD,
sc->ah->ah_radio_5ghz_revision),
sc->ah->ah_radio_5ghz_revision);
}
}
/* Multi chip radio (RF5111 - RF2111) ->
* report both 2GHz/5GHz radios */
else if (sc->ah->ah_radio_5ghz_revision &&
sc->ah->ah_radio_2ghz_revision) {
DBG("RF%s 5GHz radio found (0x%x)\n",
ath5k_chip_name(AR5K_VERSION_RAD,
sc->ah->ah_radio_5ghz_revision),
sc->ah->ah_radio_5ghz_revision);
DBG("RF%s 2GHz radio found (0x%x)\n",
ath5k_chip_name(AR5K_VERSION_RAD,
sc->ah->ah_radio_2ghz_revision),
sc->ah->ah_radio_2ghz_revision);
}
}
#endif
/* Ready to go */
sc->status &= ~ATH_STAT_INVALID;
return 0;
err_ah:
ath5k_hw_detach(sc->ah);
err_free_hwinfo:
free(sc->hwinfo);
err_free:
net80211_free(dev);
err_map:
iounmap(mem);
err:
return ret;
}
static void ath5k_remove(struct pci_device *pdev)
{
struct net80211_device *dev = pci_get_drvdata(pdev);
struct ath5k_softc *sc = dev->priv;
ath5k_detach(dev);
ath5k_hw_detach(sc->ah);
iounmap(sc->iobase);
free(sc->hwinfo);
net80211_free(dev);
}
/***********************\
* Driver Initialization *
\***********************/
static int
ath5k_attach(struct net80211_device *dev)
{
struct ath5k_softc *sc = dev->priv;
struct ath5k_hw *ah = sc->ah;
int ret;
/*
* Collect the channel list. The 802.11 layer
* is resposible for filtering this list based
* on settings like the phy mode and regulatory
* domain restrictions.
*/
ret = ath5k_setup_bands(dev);
if (ret) {
DBG("ath5k: can't get channels\n");
goto err;
}
/* NB: setup here so ath5k_rate_update is happy */
if (ah->ah_modes & AR5K_MODE_BIT_11A)
ath5k_setcurmode(sc, AR5K_MODE_11A);
else
ath5k_setcurmode(sc, AR5K_MODE_11B);
/*
* Allocate tx+rx descriptors and populate the lists.
*/
ret = ath5k_desc_alloc(sc);
if (ret) {
DBG("ath5k: can't allocate descriptors\n");
goto err;
}
/*
* Allocate hardware transmit queues. Note that hw functions
* handle reseting these queues at the needed time.
*/
ret = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BE);
if (ret) {
DBG("ath5k: can't setup xmit queue\n");
goto err_desc;
}
sc->last_calib_ticks = currticks();
ret = ath5k_eeprom_read_mac(ah, sc->hwinfo->hwaddr);
if (ret) {
DBG("ath5k: unable to read address from EEPROM: 0x%04x\n",
sc->pdev->device);
goto err_queues;
}
memset(sc->bssidmask, 0xff, ETH_ALEN);
ath5k_hw_set_bssid_mask(sc->ah, sc->bssidmask);
ret = net80211_register(sc->dev, &ath5k_ops, sc->hwinfo);
if (ret) {
DBG("ath5k: can't register ieee80211 hw\n");
goto err_queues;
}
return 0;
err_queues:
ath5k_txq_release(sc);
err_desc:
ath5k_desc_free(sc);
err:
return ret;
}
static void
ath5k_detach(struct net80211_device *dev)
{
struct ath5k_softc *sc = dev->priv;
net80211_unregister(dev);
ath5k_desc_free(sc);
ath5k_txq_release(sc);
}
/********************\
* Channel/mode setup *
\********************/
/*
* Convert IEEE channel number to MHz frequency.
*/
static inline short
ath5k_ieee2mhz(short chan)
{
if (chan < 14)
return 2407 + 5 * chan;
if (chan == 14)
return 2484;
if (chan < 27)
return 2212 + 20 * chan;
return 5000 + 5 * chan;
}
static unsigned int
ath5k_copy_channels(struct ath5k_hw *ah,
struct net80211_channel *channels,
unsigned int mode, unsigned int max)
{
unsigned int i, count, size, chfreq, freq, ch;
if (!(ah->ah_modes & (1 << mode)))
return 0;
switch (mode) {
case AR5K_MODE_11A:
case AR5K_MODE_11A_TURBO:
/* 1..220, but 2GHz frequencies are filtered by check_channel */
size = 220;
chfreq = CHANNEL_5GHZ;
break;
case AR5K_MODE_11B:
case AR5K_MODE_11G:
case AR5K_MODE_11G_TURBO:
size = 26;
chfreq = CHANNEL_2GHZ;
break;
default:
return 0;
}
for (i = 0, count = 0; i < size && max > 0; i++) {
ch = i + 1 ;
freq = ath5k_ieee2mhz(ch);
/* Check if channel is supported by the chipset */
if (!ath5k_channel_ok(ah, freq, chfreq))
continue;
/* Write channel info and increment counter */
channels[count].center_freq = freq;
channels[count].maxpower = 0; /* use regulatory */
channels[count].band = (chfreq == CHANNEL_2GHZ) ?
NET80211_BAND_2GHZ : NET80211_BAND_5GHZ;
switch (mode) {
case AR5K_MODE_11A:
case AR5K_MODE_11G:
channels[count].hw_value = chfreq | CHANNEL_OFDM;
break;
case AR5K_MODE_11A_TURBO:
case AR5K_MODE_11G_TURBO:
channels[count].hw_value = chfreq |
CHANNEL_OFDM | CHANNEL_TURBO;
break;
case AR5K_MODE_11B:
channels[count].hw_value = CHANNEL_B;
}
count++;
max--;
}
return count;
}
static int
ath5k_setup_bands(struct net80211_device *dev)
{
struct ath5k_softc *sc = dev->priv;
struct ath5k_hw *ah = sc->ah;
int max_c, count_c = 0;
int i;
int band;
max_c = sizeof(sc->hwinfo->channels) / sizeof(sc->hwinfo->channels[0]);
/* 2GHz band */
if (sc->ah->ah_capabilities.cap_mode & AR5K_MODE_BIT_11G) {
/* G mode */
band = NET80211_BAND_2GHZ;
sc->hwinfo->bands = NET80211_BAND_BIT_2GHZ;
sc->hwinfo->modes = (NET80211_MODE_G | NET80211_MODE_B);
for (i = 0; i < 12; i++)
sc->hwinfo->rates[band][i] = ath5k_rates[i].bitrate;
sc->hwinfo->nr_rates[band] = 12;
sc->hwinfo->nr_channels =
ath5k_copy_channels(ah, sc->hwinfo->channels,
AR5K_MODE_11G, max_c);
count_c = sc->hwinfo->nr_channels;
max_c -= count_c;
} else if (sc->ah->ah_capabilities.cap_mode & AR5K_MODE_BIT_11B) {
/* B mode */
band = NET80211_BAND_2GHZ;
sc->hwinfo->bands = NET80211_BAND_BIT_2GHZ;
sc->hwinfo->modes = NET80211_MODE_B;
for (i = 0; i < 4; i++)
sc->hwinfo->rates[band][i] = ath5k_rates[i].bitrate;
sc->hwinfo->nr_rates[band] = 4;
sc->hwinfo->nr_channels =
ath5k_copy_channels(ah, sc->hwinfo->channels,
AR5K_MODE_11B, max_c);
count_c = sc->hwinfo->nr_channels;
max_c -= count_c;
}
/* 5GHz band, A mode */
if (sc->ah->ah_capabilities.cap_mode & AR5K_MODE_BIT_11A) {
band = NET80211_BAND_5GHZ;
sc->hwinfo->bands |= NET80211_BAND_BIT_5GHZ;
sc->hwinfo->modes |= NET80211_MODE_A;
for (i = 0; i < 8; i++)
sc->hwinfo->rates[band][i] = ath5k_rates[i+4].bitrate;
sc->hwinfo->nr_rates[band] = 8;
sc->hwinfo->nr_channels =
ath5k_copy_channels(ah, sc->hwinfo->channels,
AR5K_MODE_11B, max_c);
count_c = sc->hwinfo->nr_channels;
max_c -= count_c;
}
return 0;
}
/*
* Set/change channels. If the channel is really being changed,
* it's done by reseting the chip. To accomplish this we must
* first cleanup any pending DMA, then restart stuff after a la
* ath5k_init.
*/
static int
ath5k_chan_set(struct ath5k_softc *sc, struct net80211_channel *chan)
{
if (chan->center_freq != sc->curchan->center_freq ||
chan->hw_value != sc->curchan->hw_value) {
/*
* To switch channels clear any pending DMA operations;
* wait long enough for the RX fifo to drain, reset the
* hardware at the new frequency, and then re-enable
* the relevant bits of the h/w.
*/
DBG2("ath5k: resetting for channel change (%d -> %d MHz)\n",
sc->curchan->center_freq, chan->center_freq);
return ath5k_reset(sc, chan);
}
return 0;
}
static void
ath5k_setcurmode(struct ath5k_softc *sc, unsigned int mode)
{
sc->curmode = mode;
if (mode == AR5K_MODE_11A) {
sc->curband = NET80211_BAND_5GHZ;
} else {
sc->curband = NET80211_BAND_2GHZ;
}
}
static void
ath5k_mode_setup(struct ath5k_softc *sc)
{
struct ath5k_hw *ah = sc->ah;
u32 rfilt;
/* configure rx filter */
rfilt = sc->filter_flags;
ath5k_hw_set_rx_filter(ah, rfilt);
if (ath5k_hw_hasbssidmask(ah))
ath5k_hw_set_bssid_mask(ah, sc->bssidmask);
/* configure operational mode */
ath5k_hw_set_opmode(ah);
ath5k_hw_set_mcast_filter(ah, 0, 0);
}
static inline int
ath5k_hw_rix_to_bitrate(int hw_rix)
{
int i;
for (i = 0; i < ATH5K_NR_RATES; i++) {
if (ath5k_rates[i].hw_code == hw_rix)
return ath5k_rates[i].bitrate;
}
DBG("ath5k: invalid rix %02x\n", hw_rix);
return 10; /* use lowest rate */
}
int ath5k_bitrate_to_hw_rix(int bitrate)
{
int i;
for (i = 0; i < ATH5K_NR_RATES; i++) {
if (ath5k_rates[i].bitrate == bitrate)
return ath5k_rates[i].hw_code;
}
DBG("ath5k: invalid bitrate %d\n", bitrate);
return ATH5K_RATE_CODE_1M; /* use lowest rate */
}
/***************\
* Buffers setup *
\***************/
static struct io_buffer *
ath5k_rx_iob_alloc(struct ath5k_softc *sc, u32 *iob_addr)
{
struct io_buffer *iob;
unsigned int off;
/*
* Allocate buffer with headroom_needed space for the
* fake physical layer header at the start.
*/
iob = alloc_iob(sc->rxbufsize + sc->cachelsz - 1);
if (!iob) {
DBG("ath5k: can't alloc iobuf of size %d\n",
sc->rxbufsize + sc->cachelsz - 1);
return NULL;
}
*iob_addr = virt_to_bus(iob->data);
/*
* Cache-line-align. This is important (for the
* 5210 at least) as not doing so causes bogus data
* in rx'd frames.
*/
off = *iob_addr % sc->cachelsz;
if (off != 0) {
iob_reserve(iob, sc->cachelsz - off);
*iob_addr += sc->cachelsz - off;
}
return iob;
}
static int
ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
{
struct ath5k_hw *ah = sc->ah;
struct io_buffer *iob = bf->iob;
struct ath5k_desc *ds;
if (!iob) {
iob = ath5k_rx_iob_alloc(sc, &bf->iobaddr);
if (!iob)
return -ENOMEM;
bf->iob = iob;
}
/*
* Setup descriptors. For receive we always terminate
* the descriptor list with a self-linked entry so we'll
* not get overrun under high load (as can happen with a
* 5212 when ANI processing enables PHY error frames).
*
* To insure the last descriptor is self-linked we create
* each descriptor as self-linked and add it to the end. As
* each additional descriptor is added the previous self-linked
* entry is ``fixed'' naturally. This should be safe even
* if DMA is happening. When processing RX interrupts we
* never remove/process the last, self-linked, entry on the
* descriptor list. This insures the hardware always has
* someplace to write a new frame.
*/
ds = bf->desc;
ds->ds_link = bf->daddr; /* link to self */
ds->ds_data = bf->iobaddr;
if (ah->ah_setup_rx_desc(ah, ds,
iob_tailroom(iob), /* buffer size */
0) != 0) {
DBG("ath5k: error setting up RX descriptor for %zd bytes\n", iob_tailroom(iob));
return -EINVAL;
}
if (sc->rxlink != NULL)
*sc->rxlink = bf->daddr;
sc->rxlink = &ds->ds_link;
return 0;
}
static int
ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
{
struct ath5k_hw *ah = sc->ah;
struct ath5k_txq *txq = &sc->txq;
struct ath5k_desc *ds = bf->desc;
struct io_buffer *iob = bf->iob;
unsigned int pktlen, flags;
int ret;
u16 duration = 0;
u16 cts_rate = 0;
flags = AR5K_TXDESC_INTREQ | AR5K_TXDESC_CLRDMASK;
bf->iobaddr = virt_to_bus(iob->data);
pktlen = iob_len(iob);
/* FIXME: If we are in g mode and rate is a CCK rate
* subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta
* from tx power (value is in dB units already) */
if (sc->dev->phy_flags & NET80211_PHY_USE_PROTECTION) {
struct net80211_device *dev = sc->dev;
flags |= AR5K_TXDESC_CTSENA;
cts_rate = sc->hw_rtscts_rate;
duration = net80211_cts_duration(dev, pktlen);
}
ret = ah->ah_setup_tx_desc(ah, ds, pktlen,
IEEE80211_TYP_FRAME_HEADER_LEN,
AR5K_PKT_TYPE_NORMAL, sc->power_level * 2,
sc->hw_rate, ATH5K_RETRIES,
AR5K_TXKEYIX_INVALID, 0, flags,
cts_rate, duration);
if (ret)
return ret;
ds->ds_link = 0;
ds->ds_data = bf->iobaddr;
list_add_tail(&bf->list, &txq->q);
if (txq->link == NULL) /* is this first packet? */
ath5k_hw_set_txdp(ah, txq->qnum, bf->daddr);
else /* no, so only link it */
*txq->link = bf->daddr;
txq->link = &ds->ds_link;
ath5k_hw_start_tx_dma(ah, txq->qnum);
mb();
return 0;
}
/*******************\
* Descriptors setup *
\*******************/
static int
ath5k_desc_alloc(struct ath5k_softc *sc)
{
struct ath5k_desc *ds;
struct ath5k_buf *bf;
u32 da;
unsigned int i;
int ret;
/* allocate descriptors */
sc->desc_len = sizeof(struct ath5k_desc) * (ATH_TXBUF + ATH_RXBUF + 1);
sc->desc = malloc_phys(sc->desc_len, ATH5K_DESC_ALIGN);
if (sc->desc == NULL) {
DBG("ath5k: can't allocate descriptors\n");
ret = -ENOMEM;
goto err;
}
memset(sc->desc, 0, sc->desc_len);
sc->desc_daddr = virt_to_bus(sc->desc);
ds = sc->desc;
da = sc->desc_daddr;
bf = calloc(ATH_TXBUF + ATH_RXBUF + 1, sizeof(struct ath5k_buf));
if (bf == NULL) {
DBG("ath5k: can't allocate buffer pointers\n");
ret = -ENOMEM;
goto err_free;
}
sc->bufptr = bf;
INIT_LIST_HEAD(&sc->rxbuf);
for (i = 0; i < ATH_RXBUF; i++, bf++, ds++, da += sizeof(*ds)) {
bf->desc = ds;
bf->daddr = da;
list_add_tail(&bf->list, &sc->rxbuf);
}
INIT_LIST_HEAD(&sc->txbuf);
sc->txbuf_len = ATH_TXBUF;
for (i = 0; i < ATH_TXBUF; i++, bf++, ds++, da += sizeof(*ds)) {
bf->desc = ds;
bf->daddr = da;
list_add_tail(&bf->list, &sc->txbuf);
}
return 0;
err_free:
free_phys(sc->desc, sc->desc_len);
err:
sc->desc = NULL;
return ret;
}
static void
ath5k_desc_free(struct ath5k_softc *sc)
{
struct ath5k_buf *bf;
list_for_each_entry(bf, &sc->txbuf, list)
ath5k_txbuf_free(sc, bf);
list_for_each_entry(bf, &sc->rxbuf, list)
ath5k_rxbuf_free(sc, bf);
/* Free memory associated with all descriptors */
free_phys(sc->desc, sc->desc_len);
free(sc->bufptr);
sc->bufptr = NULL;
}
/**************\
* Queues setup *
\**************/
static int
ath5k_txq_setup(struct ath5k_softc *sc, int qtype, int subtype)
{
struct ath5k_hw *ah = sc->ah;
struct ath5k_txq *txq;
struct ath5k_txq_info qi = {
.tqi_subtype = subtype,
.tqi_aifs = AR5K_TXQ_USEDEFAULT,
.tqi_cw_min = AR5K_TXQ_USEDEFAULT,
.tqi_cw_max = AR5K_TXQ_USEDEFAULT
};
int qnum;
/*
* Enable interrupts only for EOL and DESC conditions.
* We mark tx descriptors to receive a DESC interrupt
* when a tx queue gets deep; otherwise waiting for the
* EOL to reap descriptors. Note that this is done to
* reduce interrupt load and this only defers reaping
* descriptors, never transmitting frames. Aside from
* reducing interrupts this also permits more concurrency.
* The only potential downside is if the tx queue backs
* up in which case the top half of the kernel may backup
* due to a lack of tx descriptors.
*/
qi.tqi_flags = AR5K_TXQ_FLAG_TXEOLINT_ENABLE |
AR5K_TXQ_FLAG_TXDESCINT_ENABLE;
qnum = ath5k_hw_setup_tx_queue(ah, qtype, &qi);
if (qnum < 0) {
DBG("ath5k: can't set up a TX queue\n");
return -EIO;
}
txq = &sc->txq;
if (!txq->setup) {
txq->qnum = qnum;
txq->link = NULL;
INIT_LIST_HEAD(&txq->q);
txq->setup = 1;
}
return 0;
}
static void
ath5k_txq_drainq(struct ath5k_softc *sc, struct ath5k_txq *txq)
{
struct ath5k_buf *bf, *bf0;
list_for_each_entry_safe(bf, bf0, &txq->q, list) {
ath5k_txbuf_free(sc, bf);
list_del(&bf->list);
list_add_tail(&bf->list, &sc->txbuf);
sc->txbuf_len++;
}
txq->link = NULL;
}
/*
* Drain the transmit queues and reclaim resources.
*/
static void
ath5k_txq_cleanup(struct ath5k_softc *sc)
{
struct ath5k_hw *ah = sc->ah;
if (!(sc->status & ATH_STAT_INVALID)) {
/* don't touch the hardware if marked invalid */
if (sc->txq.setup) {
ath5k_hw_stop_tx_dma(ah, sc->txq.qnum);
DBG("ath5k: txq [%d] %x, link %p\n",
sc->txq.qnum,
ath5k_hw_get_txdp(ah, sc->txq.qnum),
sc->txq.link);
}
}
if (sc->txq.setup)
ath5k_txq_drainq(sc, &sc->txq);
}
static void
ath5k_txq_release(struct ath5k_softc *sc)
{
if (sc->txq.setup) {
ath5k_hw_release_tx_queue(sc->ah);
sc->txq.setup = 0;
}
}
/*************\
* RX Handling *
\*************/
/*
* Enable the receive h/w following a reset.
*/
static int
ath5k_rx_start(struct ath5k_softc *sc)
{
struct ath5k_hw *ah = sc->ah;
struct ath5k_buf *bf;
int ret;
sc->rxbufsize = IEEE80211_MAX_LEN;
if (sc->rxbufsize % sc->cachelsz != 0)
sc->rxbufsize += sc->cachelsz - (sc->rxbufsize % sc->cachelsz);
sc->rxlink = NULL;
list_for_each_entry(bf, &sc->rxbuf, list) {
ret = ath5k_rxbuf_setup(sc, bf);
if (ret != 0)
return ret;
}
bf = list_entry(sc->rxbuf.next, struct ath5k_buf, list);
ath5k_hw_set_rxdp(ah, bf->daddr);
ath5k_hw_start_rx_dma(ah); /* enable recv descriptors */
ath5k_mode_setup(sc); /* set filters, etc. */
ath5k_hw_start_rx_pcu(ah); /* re-enable PCU/DMA engine */
return 0;
}
/*
* Disable the receive h/w in preparation for a reset.
*/
static void
ath5k_rx_stop(struct ath5k_softc *sc)
{
struct ath5k_hw *ah = sc->ah;
ath5k_hw_stop_rx_pcu(ah); /* disable PCU */
ath5k_hw_set_rx_filter(ah, 0); /* clear recv filter */
ath5k_hw_stop_rx_dma(ah); /* disable DMA engine */
sc->rxlink = NULL; /* just in case */
}
static void
ath5k_handle_rx(struct ath5k_softc *sc)
{
struct ath5k_rx_status rs;
struct io_buffer *iob, *next_iob;
u32 next_iob_addr;
struct ath5k_buf *bf, *bf_last;
struct ath5k_desc *ds;
int ret;
memset(&rs, 0, sizeof(rs));
if (list_empty(&sc->rxbuf)) {
DBG("ath5k: empty rx buf pool\n");
return;
}
bf_last = list_entry(sc->rxbuf.prev, struct ath5k_buf, list);
do {
bf = list_entry(sc->rxbuf.next, struct ath5k_buf, list);
assert(bf->iob != NULL);
iob = bf->iob;
ds = bf->desc;
/*
* last buffer must not be freed to ensure proper hardware
* function. When the hardware finishes also a packet next to
* it, we are sure, it doesn't use it anymore and we can go on.
*/
if (bf_last == bf)
bf->flags |= 1;
if (bf->flags) {
struct ath5k_buf *bf_next = list_entry(bf->list.next,
struct ath5k_buf, list);
ret = sc->ah->ah_proc_rx_desc(sc->ah, bf_next->desc,
&rs);
if (ret)
break;
bf->flags &= ~1;
/* skip the overwritten one (even status is martian) */
goto next;
}
ret = sc->ah->ah_proc_rx_desc(sc->ah, ds, &rs);
if (ret) {
if (ret != -EINPROGRESS) {
DBG("ath5k: error in processing rx desc: %s\n",
strerror(ret));
net80211_rx_err(sc->dev, NULL, -ret);
} else {
/* normal return, reached end of
available descriptors */
}
return;
}
if (rs.rs_more) {
DBG("ath5k: unsupported fragmented rx\n");
goto next;
}
if (rs.rs_status) {
if (rs.rs_status & AR5K_RXERR_PHY) {
/* These are uncommon, and may indicate a real problem. */
net80211_rx_err(sc->dev, NULL, EIO);
goto next;
}
if (rs.rs_status & AR5K_RXERR_CRC) {
/* These occur *all the time*. */
goto next;
}
if (rs.rs_status & AR5K_RXERR_DECRYPT) {
/*
* Decrypt error. If the error occurred
* because there was no hardware key, then
* let the frame through so the upper layers
* can process it. This is necessary for 5210
* parts which have no way to setup a ``clear''
* key cache entry.
*
* XXX do key cache faulting
*/
if (rs.rs_keyix == AR5K_RXKEYIX_INVALID &&
!(rs.rs_status & AR5K_RXERR_CRC))
goto accept;
}
/* any other error, unhandled */
DBG("ath5k: packet rx status %x\n", rs.rs_status);
goto next;
}
accept:
next_iob = ath5k_rx_iob_alloc(sc, &next_iob_addr);
/*
* If we can't replace bf->iob with a new iob under memory
* pressure, just skip this packet
*/
if (!next_iob) {
DBG("ath5k: dropping packet under memory pressure\n");
goto next;
}
iob_put(iob, rs.rs_datalen);
/* The MAC header is padded to have 32-bit boundary if the
* packet payload is non-zero. However, iPXE only
* supports standard 802.11 packets with 24-byte
* header, so no padding correction should be needed.
*/
DBG2("ath5k: rx %d bytes, signal %d\n", rs.rs_datalen,
rs.rs_rssi);
net80211_rx(sc->dev, iob, rs.rs_rssi,
ath5k_hw_rix_to_bitrate(rs.rs_rate));
bf->iob = next_iob;
bf->iobaddr = next_iob_addr;
next:
list_del(&bf->list);
list_add_tail(&bf->list, &sc->rxbuf);
} while (ath5k_rxbuf_setup(sc, bf) == 0);
}
/*************\
* TX Handling *
\*************/
static void
ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq)
{
struct ath5k_tx_status ts;
struct ath5k_buf *bf, *bf0;
struct ath5k_desc *ds;
struct io_buffer *iob;
int ret;
memset(&ts, 0, sizeof(ts));
list_for_each_entry_safe(bf, bf0, &txq->q, list) {
ds = bf->desc;
ret = sc->ah->ah_proc_tx_desc(sc->ah, ds, &ts);
if (ret) {
if (ret != -EINPROGRESS) {
DBG("ath5k: error in processing tx desc: %s\n",
strerror(ret));
} else {
/* normal return, reached end of tx completions */
}
break;
}
iob = bf->iob;
bf->iob = NULL;
DBG2("ath5k: tx %zd bytes complete, %d retries\n",
iob_len(iob), ts.ts_retry[0]);
net80211_tx_complete(sc->dev, iob, ts.ts_retry[0],
ts.ts_status ? EIO : 0);
list_del(&bf->list);
list_add_tail(&bf->list, &sc->txbuf);
sc->txbuf_len++;
}
if (list_empty(&txq->q))
txq->link = NULL;
}
static void
ath5k_handle_tx(struct ath5k_softc *sc)
{
ath5k_tx_processq(sc, &sc->txq);
}
/********************\
* Interrupt handling *
\********************/
static void
ath5k_irq(struct net80211_device *dev, int enable)
{
struct ath5k_softc *sc = dev->priv;
struct ath5k_hw *ah = sc->ah;
sc->irq_ena = enable;
ah->ah_ier = enable ? AR5K_IER_ENABLE : AR5K_IER_DISABLE;
ath5k_hw_reg_write(ah, ah->ah_ier, AR5K_IER);
ath5k_hw_set_imr(ah, sc->imask);
}
static int
ath5k_init(struct ath5k_softc *sc)
{
struct ath5k_hw *ah = sc->ah;
int ret, i;
/*
* Stop anything previously setup. This is safe
* no matter this is the first time through or not.
*/
ath5k_stop_hw(sc);
/*
* The basic interface to setting the hardware in a good
* state is ``reset''. On return the hardware is known to
* be powered up and with interrupts disabled. This must
* be followed by initialization of the appropriate bits
* and then setup of the interrupt mask.
*/
sc->curchan = sc->dev->channels + sc->dev->channel;
sc->curband = sc->curchan->band;
sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL |
AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL |
AR5K_INT_FATAL | AR5K_INT_GLOBAL;
ret = ath5k_reset(sc, NULL);
if (ret)
goto done;
ath5k_rfkill_hw_start(ah);
/*
* Reset the key cache since some parts do not reset the
* contents on initial power up or resume from suspend.
*/
for (i = 0; i < AR5K_KEYTABLE_SIZE; i++)
ath5k_hw_reset_key(ah, i);
/* Set ack to be sent at low bit-rates */
ath5k_hw_set_ack_bitrate_high(ah, 0);
ret = 0;
done:
mb();
return ret;
}
static int
ath5k_stop_hw(struct ath5k_softc *sc)
{
struct ath5k_hw *ah = sc->ah;
/*
* Shutdown the hardware and driver:
* stop output from above
* disable interrupts
* turn off timers
* turn off the radio
* clear transmit machinery
* clear receive machinery
* drain and release tx queues
* reclaim beacon resources
* power down hardware
*
* Note that some of this work is not possible if the
* hardware is gone (invalid).
*/
if (!(sc->status & ATH_STAT_INVALID)) {
ath5k_hw_set_imr(ah, 0);
}
ath5k_txq_cleanup(sc);
if (!(sc->status & ATH_STAT_INVALID)) {
ath5k_rx_stop(sc);
ath5k_hw_phy_disable(ah);
} else
sc->rxlink = NULL;
ath5k_rfkill_hw_stop(sc->ah);
return 0;
}
static void
ath5k_poll(struct net80211_device *dev)
{
struct ath5k_softc *sc = dev->priv;
struct ath5k_hw *ah = sc->ah;
enum ath5k_int status;
unsigned int counter = 1000;
if (currticks() - sc->last_calib_ticks >
ATH5K_CALIB_INTERVAL * TICKS_PER_SEC) {
ath5k_calibrate(sc);
sc->last_calib_ticks = currticks();
}
if ((sc->status & ATH_STAT_INVALID) ||
(sc->irq_ena && !ath5k_hw_is_intr_pending(ah)))
return;
do {
ath5k_hw_get_isr(ah, &status); /* NB: clears IRQ too */
DBGP("ath5k: status %#x/%#x\n", status, sc->imask);
if (status & AR5K_INT_FATAL) {
/*
* Fatal errors are unrecoverable.
* Typically these are caused by DMA errors.
*/
DBG("ath5k: fatal error, resetting\n");
ath5k_reset_wake(sc);
} else if (status & AR5K_INT_RXORN) {
DBG("ath5k: rx overrun, resetting\n");
ath5k_reset_wake(sc);
} else {
if (status & AR5K_INT_RXEOL) {
/*
* NB: the hardware should re-read the link when
* RXE bit is written, but it doesn't work at
* least on older hardware revs.
*/
DBG("ath5k: rx EOL\n");
sc->rxlink = NULL;
}
if (status & AR5K_INT_TXURN) {
/* bump tx trigger level */
DBG("ath5k: tx underrun\n");
ath5k_hw_update_tx_triglevel(ah, 1);
}
if (status & (AR5K_INT_RXOK | AR5K_INT_RXERR))
ath5k_handle_rx(sc);
if (status & (AR5K_INT_TXOK | AR5K_INT_TXDESC
| AR5K_INT_TXERR | AR5K_INT_TXEOL))
ath5k_handle_tx(sc);
}
} while (ath5k_hw_is_intr_pending(ah) && counter-- > 0);
if (!counter)
DBG("ath5k: too many interrupts, giving up for now\n");
}
/*
* Periodically recalibrate the PHY to account
* for temperature/environment changes.
*/
static void
ath5k_calibrate(struct ath5k_softc *sc)
{
struct ath5k_hw *ah = sc->ah;
if (ath5k_hw_gainf_calibrate(ah) == AR5K_RFGAIN_NEED_CHANGE) {
/*
* Rfgain is out of bounds, reset the chip
* to load new gain values.
*/
DBG("ath5k: resetting for calibration\n");
ath5k_reset_wake(sc);
}
if (ath5k_hw_phy_calibrate(ah, sc->curchan))
DBG("ath5k: calibration of channel %d failed\n",
sc->curchan->channel_nr);
}
/********************\
* Net80211 functions *
\********************/
static int
ath5k_tx(struct net80211_device *dev, struct io_buffer *iob)
{
struct ath5k_softc *sc = dev->priv;
struct ath5k_buf *bf;
int rc;
/*
* The hardware expects the header padded to 4 byte boundaries.
* iPXE only ever sends 24-byte headers, so no action necessary.
*/
if (list_empty(&sc->txbuf)) {
DBG("ath5k: dropping packet because no tx bufs available\n");
return -ENOBUFS;
}
bf = list_entry(sc->txbuf.next, struct ath5k_buf, list);
list_del(&bf->list);
sc->txbuf_len--;
bf->iob = iob;
if ((rc = ath5k_txbuf_setup(sc, bf)) != 0) {
bf->iob = NULL;
list_add_tail(&bf->list, &sc->txbuf);
sc->txbuf_len++;
return rc;
}
return 0;
}
/*
* Reset the hardware. If chan is not NULL, then also pause rx/tx
* and change to the given channel.
*/
static int
ath5k_reset(struct ath5k_softc *sc, struct net80211_channel *chan)
{
struct ath5k_hw *ah = sc->ah;
int ret;
if (chan) {
ath5k_hw_set_imr(ah, 0);
ath5k_txq_cleanup(sc);
ath5k_rx_stop(sc);
sc->curchan = chan;
sc->curband = chan->band;
}
ret = ath5k_hw_reset(ah, sc->curchan, 1);
if (ret) {
DBG("ath5k: can't reset hardware: %s\n", strerror(ret));
return ret;
}
ret = ath5k_rx_start(sc);
if (ret) {
DBG("ath5k: can't start rx logic: %s\n", strerror(ret));
return ret;
}
/*
* Change channels and update the h/w rate map if we're switching;
* e.g. 11a to 11b/g.
*
* We may be doing a reset in response to an ioctl that changes the
* channel so update any state that might change as a result.
*
* XXX needed?
*/
/* ath5k_chan_change(sc, c); */
/* Reenable interrupts if necessary */
ath5k_irq(sc->dev, sc->irq_ena);
return 0;
}
static int ath5k_reset_wake(struct ath5k_softc *sc)
{
return ath5k_reset(sc, sc->curchan);
}
static int ath5k_start(struct net80211_device *dev)
{
struct ath5k_softc *sc = dev->priv;
int ret;
if ((ret = ath5k_init(sc)) != 0)
return ret;
sc->assoc = 0;
ath5k_configure_filter(sc);
ath5k_hw_set_lladdr(sc->ah, dev->netdev->ll_addr);
return 0;
}
static void ath5k_stop(struct net80211_device *dev)
{
struct ath5k_softc *sc = dev->priv;
u8 mac[ETH_ALEN] = {};
ath5k_hw_set_lladdr(sc->ah, mac);
ath5k_stop_hw(sc);
}
static int
ath5k_config(struct net80211_device *dev, int changed)
{
struct ath5k_softc *sc = dev->priv;
struct ath5k_hw *ah = sc->ah;
struct net80211_channel *chan = &dev->channels[dev->channel];
int ret;
if (changed & NET80211_CFG_CHANNEL) {
sc->power_level = chan->maxpower;
if ((ret = ath5k_chan_set(sc, chan)) != 0)
return ret;
}
if ((changed & NET80211_CFG_RATE) ||
(changed & NET80211_CFG_PHY_PARAMS)) {
int spmbl = ATH5K_SPMBL_NO;
u16 rate = dev->rates[dev->rate];
u16 slowrate = dev->rates[dev->rtscts_rate];
int i;
if (dev->phy_flags & NET80211_PHY_USE_SHORT_PREAMBLE)
spmbl = ATH5K_SPMBL_YES;
for (i = 0; i < ATH5K_NR_RATES; i++) {
if (ath5k_rates[i].bitrate == rate &&
(ath5k_rates[i].short_pmbl & spmbl))
sc->hw_rate = ath5k_rates[i].hw_code;
if (ath5k_rates[i].bitrate == slowrate &&
(ath5k_rates[i].short_pmbl & spmbl))
sc->hw_rtscts_rate = ath5k_rates[i].hw_code;
}
}
if (changed & NET80211_CFG_ASSOC) {
sc->assoc = !!(dev->state & NET80211_ASSOCIATED);
if (sc->assoc) {
memcpy(ah->ah_bssid, dev->bssid, ETH_ALEN);
} else {
memset(ah->ah_bssid, 0xff, ETH_ALEN);
}
ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
}
return 0;
}
/*
* o always accept unicast, broadcast, and multicast traffic
* o multicast traffic for all BSSIDs will be enabled if mac80211
* says it should be
* o maintain current state of phy ofdm or phy cck error reception.
* If the hardware detects any of these type of errors then
* ath5k_hw_get_rx_filter() will pass to us the respective
* hardware filters to be able to receive these type of frames.
* o probe request frames are accepted only when operating in
* hostap, adhoc, or monitor modes
* o enable promiscuous mode according to the interface state
* o accept beacons:
* - when operating in adhoc mode so the 802.11 layer creates
* node table entries for peers,
* - when operating in station mode for collecting rssi data when
* the station is otherwise quiet, or
* - when scanning
*/
static void ath5k_configure_filter(struct ath5k_softc *sc)
{
struct ath5k_hw *ah = sc->ah;
u32 mfilt[2], rfilt;
/* Enable all multicast */
mfilt[0] = ~0;
mfilt[1] = ~0;
/* Enable data frames and beacons */
rfilt = (AR5K_RX_FILTER_UCAST | AR5K_RX_FILTER_BCAST |
AR5K_RX_FILTER_MCAST | AR5K_RX_FILTER_BEACON);
/* Set filters */
ath5k_hw_set_rx_filter(ah, rfilt);
/* Set multicast bits */
ath5k_hw_set_mcast_filter(ah, mfilt[0], mfilt[1]);
/* Set the cached hw filter flags, this will alter actually
* be set in HW */
sc->filter_flags = rfilt;
}
