/**************************************************************************
*
* mtd80x.c: Etherboot device driver for the mtd80x Ethernet chip.
* Written 2004-2004 by Erdem Güven <zuencap@yahoo.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Portions of this code based on:
* fealnx.c: A Linux device driver for the mtd80x Ethernet chip
* Written 1998-2000 by Donald Becker
*
***************************************************************************/
/* to get some global routines like printf */
#include "etherboot.h"
/* to get the interface to the body of the program */
#include "nic.h"
/* to get the PCI support functions, if this is a PCI NIC */
#include <gpxe/pci.h>
#include <gpxe/ethernet.h>
/* Condensed operations for readability. */
#define virt_to_le32desc(addr) cpu_to_le32(virt_to_bus(addr))
#define le32desc_to_virt(addr) bus_to_virt(le32_to_cpu(addr))
#define get_unaligned(ptr) (*(ptr))
/* Operational parameters that are set at compile time. */
/* Keep the ring sizes a power of two for compile efficiency. */
/* The compiler will convert <unsigned>'%'<2^N> into a bit mask. */
/* Making the Tx ring too large decreases the effectiveness of channel */
/* bonding and packet priority. */
/* There are no ill effects from too-large receive rings. */
#define TX_RING_SIZE 2
#define TX_QUEUE_LEN 10 /* Limit ring entries actually used. */
#define RX_RING_SIZE 4
/* Operational parameters that usually are not changed. */
/* Time in jiffies before concluding the transmitter is hung. */
#define HZ 100
#define TX_TIME_OUT (6*HZ)
/* Allocation size of Rx buffers with normal sized Ethernet frames.
Do not change this value without good reason. This is not a limit,
but a way to keep a consistent allocation size among drivers.
*/
#define PKT_BUF_SZ 1536
/* Generic MII registers. */
#define MII_BMCR 0x00 /* Basic mode control register */
#define MII_BMSR 0x01 /* Basic mode status register */
#define MII_PHYSID1 0x02 /* PHYS ID 1 */
#define MII_PHYSID2 0x03 /* PHYS ID 2 */
#define MII_ADVERTISE 0x04 /* Advertisement control reg */
#define MII_LPA 0x05 /* Link partner ability reg */
#define MII_EXPANSION 0x06 /* Expansion register */
#define MII_DCOUNTER 0x12 /* Disconnect counter */
#define MII_FCSCOUNTER 0x13 /* False carrier counter */
#define MII_NWAYTEST 0x14 /* N-way auto-neg test reg */
#define MII_RERRCOUNTER 0x15 /* Receive error counter */
#define MII_SREVISION 0x16 /* Silicon revision */
#define MII_RESV1 0x17 /* Reserved... */
#define MII_LBRERROR 0x18 /* Lpback, rx, bypass error */
#define MII_PHYADDR 0x19 /* PHY address */
#define MII_RESV2 0x1a /* Reserved... */
#define MII_TPISTATUS 0x1b /* TPI status for 10mbps */
#define MII_NCONFIG 0x1c /* Network interface config */
/* Basic mode control register. */
#define BMCR_RESV 0x007f /* Unused... */
#define BMCR_CTST 0x0080 /* Collision test */
#define BMCR_FULLDPLX 0x0100 /* Full duplex */
#define BMCR_ANRESTART 0x0200 /* Auto negotiation restart */
#define BMCR_ISOLATE 0x0400 /* Disconnect DP83840 from MII */
#define BMCR_PDOWN 0x0800 /* Powerdown the DP83840 */
#define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */
#define BMCR_SPEED100 0x2000 /* Select 100Mbps */
#define BMCR_LOOPBACK 0x4000 /* TXD loopback bits */
#define BMCR_RESET 0x8000 /* Reset the DP83840 */
/* Basic mode status register. */
#define BMSR_ERCAP 0x0001 /* Ext-reg capability */
#define BMSR_JCD 0x0002 /* Jabber detected */
#define BMSR_LSTATUS 0x0004 /* Link status */
#define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */
#define BMSR_RFAULT 0x0010 /* Remote fault detected */
#define BMSR_ANEGCOMPLETE 0x0020 /* Auto-negotiation complete */
#define BMSR_RESV 0x07c0 /* Unused... */
#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */
#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */
#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */
#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */
#define BMSR_100BASE4 0x8000 /* Can do 100mbps, 4k packets */
/* Advertisement control register. */
#define ADVERTISE_SLCT 0x001f /* Selector bits */
#define ADVERTISE_CSMA 0x0001 /* Only selector supported */
#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */
#define ADVERTISE_RESV 0x1c00 /* Unused... */
#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */
#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */
#define ADVERTISE_NPAGE 0x8000 /* Next page bit */
#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \
ADVERTISE_CSMA)
#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \
ADVERTISE_100HALF | ADVERTISE_100FULL)
/* for different PHY */
enum phy_type_flags {
MysonPHY = 1,
AhdocPHY = 2,
SeeqPHY = 3,
MarvellPHY = 4,
Myson981 = 5,
LevelOnePHY = 6,
OtherPHY = 10,
};
/* A chip capabilities table*/
enum chip_capability_flags {
HAS_MII_XCVR,
HAS_CHIP_XCVR,
};
#if 0 /* not used */
static
struct chip_info
{
u16 dev_id;
int flag;
}
mtd80x_chips[] = {
{0x0800, HAS_MII_XCVR},
{0x0803, HAS_CHIP_XCVR},
{0x0891, HAS_MII_XCVR}
};
static int chip_cnt = sizeof( mtd80x_chips ) / sizeof( struct chip_info );
#endif
/* Offsets to the Command and Status Registers. */
enum mtd_offsets {
PAR0 = 0x0, /* physical address 0-3 */
PAR1 = 0x04, /* physical address 4-5 */
MAR0 = 0x08, /* multicast address 0-3 */
MAR1 = 0x0C, /* multicast address 4-7 */
FAR0 = 0x10, /* flow-control address 0-3 */
FAR1 = 0x14, /* flow-control address 4-5 */
TCRRCR = 0x18, /* receive & transmit configuration */
BCR = 0x1C, /* bus command */
TXPDR = 0x20, /* transmit polling demand */
RXPDR = 0x24, /* receive polling demand */
RXCWP = 0x28, /* receive current word pointer */
TXLBA = 0x2C, /* transmit list base address */
RXLBA = 0x30, /* receive list base address */
ISR = 0x34, /* interrupt status */
IMR = 0x38, /* interrupt mask */
FTH = 0x3C, /* flow control high/low threshold */
MANAGEMENT = 0x40, /* bootrom/eeprom and mii management */
TALLY = 0x44, /* tally counters for crc and mpa */
TSR = 0x48, /* tally counter for transmit status */
BMCRSR = 0x4c, /* basic mode control and status */
PHYIDENTIFIER = 0x50, /* phy identifier */
ANARANLPAR = 0x54, /* auto-negotiation advertisement and link
partner ability */
ANEROCR = 0x58, /* auto-negotiation expansion and pci conf. */
BPREMRPSR = 0x5c, /* bypass & receive error mask and phy status */
};
/* Bits in the interrupt status/enable registers. */
/* The bits in the Intr Status/Enable registers, mostly interrupt sources. */
enum intr_status_bits {
RFCON = 0x00020000, /* receive flow control xon packet */
RFCOFF = 0x00010000, /* receive flow control xoff packet */
LSCStatus = 0x00008000, /* link status change */
ANCStatus = 0x00004000, /* autonegotiation completed */
FBE = 0x00002000, /* fatal bus error */
FBEMask = 0x00001800, /* mask bit12-11 */
ParityErr = 0x00000000, /* parity error */
TargetErr = 0x00001000, /* target abort */
MasterErr = 0x00000800, /* master error */
TUNF = 0x00000400, /* transmit underflow */
ROVF = 0x00000200, /* receive overflow */
ETI = 0x00000100, /* transmit early int */
ERI = 0x00000080, /* receive early int */
CNTOVF = 0x00000040, /* counter overflow */
RBU = 0x00000020, /* receive buffer unavailable */
TBU = 0x00000010, /* transmit buffer unavilable */
TI = 0x00000008, /* transmit interrupt */
RI = 0x00000004, /* receive interrupt */
RxErr = 0x00000002, /* receive error */
};
/* Bits in the NetworkConfig register. */
enum rx_mode_bits {
RxModeMask = 0xe0,
AcceptAllPhys = 0x80, /* promiscuous mode */
AcceptBroadcast = 0x40, /* accept broadcast */
AcceptMulticast = 0x20, /* accept mutlicast */
AcceptRunt = 0x08, /* receive runt pkt */
ALP = 0x04, /* receive long pkt */
AcceptErr = 0x02, /* receive error pkt */
AcceptMyPhys = 0x00000000,
RxEnable = 0x00000001,
RxFlowCtrl = 0x00002000,
TxEnable = 0x00040000,
TxModeFDX = 0x00100000,
TxThreshold = 0x00e00000,
PS1000 = 0x00010000,
PS10 = 0x00080000,
FD = 0x00100000,
};
/* Bits in network_desc.status */
enum rx_desc_status_bits {
RXOWN = 0x80000000, /* own bit */
FLNGMASK = 0x0fff0000, /* frame length */
FLNGShift = 16,
MARSTATUS = 0x00004000, /* multicast address received */
BARSTATUS = 0x00002000, /* broadcast address received */
PHYSTATUS = 0x00001000, /* physical address received */
RXFSD = 0x00000800, /* first descriptor */
RXLSD = 0x00000400, /* last descriptor */
ErrorSummary = 0x80, /* error summary */
RUNT = 0x40, /* runt packet received */
LONG = 0x20, /* long packet received */
FAE = 0x10, /* frame align error */
CRC = 0x08, /* crc error */
RXER = 0x04, /* receive error */
};
enum rx_desc_control_bits {
RXIC = 0x00800000, /* interrupt control */
RBSShift = 0,
};
enum tx_desc_status_bits {
TXOWN = 0x80000000, /* own bit */
JABTO = 0x00004000, /* jabber timeout */
CSL = 0x00002000, /* carrier sense lost */
LC = 0x00001000, /* late collision */
EC = 0x00000800, /* excessive collision */
UDF = 0x00000400, /* fifo underflow */
DFR = 0x00000200, /* deferred */
HF = 0x00000100, /* heartbeat fail */
NCRMask = 0x000000ff, /* collision retry count */
NCRShift = 0,
};
enum tx_desc_control_bits {
TXIC = 0x80000000, /* interrupt control */
ETIControl = 0x40000000, /* early transmit interrupt */
TXLD = 0x20000000, /* last descriptor */
TXFD = 0x10000000, /* first descriptor */
CRCEnable = 0x08000000, /* crc control */
PADEnable = 0x04000000, /* padding control */
RetryTxLC = 0x02000000, /* retry late collision */
PKTSMask = 0x3ff800, /* packet size bit21-11 */
PKTSShift = 11,
TBSMask = 0x000007ff, /* transmit buffer bit 10-0 */
TBSShift = 0,
};
/* BootROM/EEPROM/MII Management Register */
#define MASK_MIIR_MII_READ 0x00000000
#define MASK_MIIR_MII_WRITE 0x00000008
#define MASK_MIIR_MII_MDO 0x00000004
#define MASK_MIIR_MII_MDI 0x00000002
#define MASK_MIIR_MII_MDC 0x00000001
/* ST+OP+PHYAD+REGAD+TA */
#define OP_READ 0x6000 /* ST:01+OP:10+PHYAD+REGAD+TA:Z0 */
#define OP_WRITE 0x5002 /* ST:01+OP:01+PHYAD+REGAD+TA:10 */
/* ------------------------------------------------------------------------- */
/* Constants for Myson PHY */
/* ------------------------------------------------------------------------- */
#define MysonPHYID 0xd0000302
/* 89-7-27 add, (begin) */
#define MysonPHYID0 0x0302
#define StatusRegister 18
#define SPEED100 0x0400 // bit10
#define FULLMODE 0x0800 // bit11
/* 89-7-27 add, (end) */
/* ------------------------------------------------------------------------- */
/* Constants for Seeq 80225 PHY */
/* ------------------------------------------------------------------------- */
#define SeeqPHYID0 0x0016
#define MIIRegister18 18
#define SPD_DET_100 0x80
#define DPLX_DET_FULL 0x40
/* ------------------------------------------------------------------------- */
/* Constants for Ahdoc 101 PHY */
/* ------------------------------------------------------------------------- */
#define AhdocPHYID0 0x0022
#define DiagnosticReg 18
#define DPLX_FULL 0x0800
#define Speed_100 0x0400
/* 89/6/13 add, */
/* -------------------------------------------------------------------------- */
/* Constants */
/* -------------------------------------------------------------------------- */
#define MarvellPHYID0 0x0141
#define LevelOnePHYID0 0x0013
#define MII1000BaseTControlReg 9
#define MII1000BaseTStatusReg 10
#define SpecificReg 17
/* for 1000BaseT Control Register */
#define PHYAbletoPerform1000FullDuplex 0x0200
#define PHYAbletoPerform1000HalfDuplex 0x0100
#define PHY1000AbilityMask 0x300
// for phy specific status register, marvell phy.
#define SpeedMask 0x0c000
#define Speed_1000M 0x08000
#define Speed_100M 0x4000
#define Speed_10M 0
#define Full_Duplex 0x2000
// 89/12/29 add, for phy specific status register, levelone phy, (begin)
#define LXT1000_100M 0x08000
#define LXT1000_1000M 0x0c000
#define LXT1000_Full 0x200
// 89/12/29 add, for phy specific status register, levelone phy, (end)
#if 0
/* for 3-in-1 case */
#define PS10 0x00080000
#define FD 0x00100000
#define PS1000 0x00010000
#endif
/* for PHY */
#define LinkIsUp 0x0004
#define LinkIsUp2 0x00040000
/* Create a static buffer of size PKT_BUF_SZ for each
RX and TX Descriptor. All descriptors point to a
part of this buffer */
struct {
u8 txb[PKT_BUF_SZ * TX_RING_SIZE] __attribute__ ((aligned(8)));
u8 rxb[PKT_BUF_SZ * RX_RING_SIZE] __attribute__ ((aligned(8)));
} mtd80x_bufs __shared;
#define txb mtd80x_bufs.txb
#define rxb mtd80x_bufs.rxb
/* The Tulip Rx and Tx buffer descriptors. */
struct mtd_desc
{
s32 status;
s32 control;
u32 buffer;
u32 next_desc;
struct mtd_desc *next_desc_logical;
u8* skbuff;
u32 reserved1;
u32 reserved2;
};
struct mtd_private
{
struct mtd_desc rx_ring[RX_RING_SIZE];
struct mtd_desc tx_ring[TX_RING_SIZE];
/* Frequently used values: keep some adjacent for cache effect. */
int flags;
struct pci_dev *pci_dev;
unsigned long crvalue;
unsigned long bcrvalue;
/*unsigned long imrvalue;*/
struct mtd_desc *cur_rx;
struct mtd_desc *lack_rxbuf;
int really_rx_count;
struct mtd_desc *cur_tx;
struct mtd_desc *cur_tx_copy;
int really_tx_count;
int free_tx_count;
unsigned int rx_buf_sz; /* Based on MTU+slack. */
/* These values are keep track of the transceiver/media in use. */
unsigned int linkok;
unsigned int line_speed;
unsigned int duplexmode;
unsigned int default_port:
4; /* Last dev->if_port value. */
unsigned int PHYType;
/* MII transceiver section. */
int mii_cnt; /* MII device addresses. */
unsigned char phys[1]; /* MII device addresses. */
/*other*/
const char *nic_name;
int ioaddr;
u16 dev_id;
};
static struct mtd_private mtdx;
static int mdio_read(struct nic * , int phy_id, int location);
static void getlinktype(struct nic * );
static void getlinkstatus(struct nic * );
static void set_rx_mode(struct nic *);
/**************************************************************************
* init_ring - setup the tx and rx descriptors
*************************************************************************/
static void init_ring(struct nic *nic __unused)
{
int i;
mtdx.cur_rx = &mtdx.rx_ring[0];
mtdx.rx_buf_sz = PKT_BUF_SZ;
/*mtdx.rx_head_desc = &mtdx.rx_ring[0];*/
/* Initialize all Rx descriptors. */
/* Fill in the Rx buffers. Handle allocation failure gracefully. */
for (i = 0; i < RX_RING_SIZE; i++)
{
mtdx.rx_ring[i].status = RXOWN;
mtdx.rx_ring[i].control = mtdx.rx_buf_sz << RBSShift;
mtdx.rx_ring[i].next_desc = virt_to_le32desc(&mtdx.rx_ring[i+1]);
mtdx.rx_ring[i].next_desc_logical = &mtdx.rx_ring[i+1];
mtdx.rx_ring[i].buffer = virt_to_le32desc(&rxb[i * PKT_BUF_SZ]);
mtdx.rx_ring[i].skbuff = &rxb[i * PKT_BUF_SZ];
}
/* Mark the last entry as wrapping the ring. */
mtdx.rx_ring[i-1].next_desc = virt_to_le32desc(&mtdx.rx_ring[0]);
mtdx.rx_ring[i-1].next_desc_logical = &mtdx.rx_ring[0];
/* We only use one transmit buffer, but two
* descriptors so transmit engines have somewhere
* to point should they feel the need */
mtdx.tx_ring[0].status = 0x00000000;
mtdx.tx_ring[0].buffer = virt_to_bus(&txb[0]);
mtdx.tx_ring[0].next_desc = virt_to_le32desc(&mtdx.tx_ring[1]);
/* This descriptor is never used */
mtdx.tx_ring[1].status = 0x00000000;
mtdx.tx_ring[1].buffer = 0; /*virt_to_bus(&txb[1]); */
mtdx.tx_ring[1].next_desc = virt_to_le32desc(&mtdx.tx_ring[0]);
return;
}
/**************************************************************************
RESET - Reset Adapter
***************************************************************************/
static void mtd_reset( struct nic *nic )
{
/* Reset the chip to erase previous misconfiguration. */
outl(0x00000001, mtdx.ioaddr + BCR);
init_ring(nic);
outl(virt_to_bus(mtdx.rx_ring), mtdx.ioaddr + RXLBA);
outl(virt_to_bus(mtdx.tx_ring), mtdx.ioaddr + TXLBA);
/* Initialize other registers. */
/* Configure the PCI bus bursts and FIFO thresholds. */
mtdx.bcrvalue = 0x10; /* little-endian, 8 burst length */
mtdx.crvalue = 0xa00; /* rx 128 burst length */
if ( mtdx.dev_id == 0x891 ) {
mtdx.bcrvalue |= 0x200; /* set PROG bit */
mtdx.crvalue |= 0x02000000; /* set enhanced bit */
}
outl( mtdx.bcrvalue, mtdx.ioaddr + BCR);
/* Restart Rx engine if stopped. */
outl(0, mtdx.ioaddr + RXPDR);
getlinkstatus(nic);
if (mtdx.linkok)
{
static const char* texts[]={"half","full","10","100","1000"};
getlinktype(nic);
DBG ( "Link is OK : %s %s\n", texts[mtdx.duplexmode-1], texts[mtdx.line_speed+1] );
} else
{
DBG ( "No link!!!\n" );
}
mtdx.crvalue |= /*TxEnable |*/ RxEnable | TxThreshold;
set_rx_mode(nic);
/* Clear interrupts by setting the interrupt mask. */
outl(FBE | TUNF | CNTOVF | RBU | TI | RI, mtdx.ioaddr + ISR);
outl( 0, mtdx.ioaddr + IMR);
}
/**************************************************************************
POLL - Wait for a frame
***************************************************************************/
static int mtd_poll(struct nic *nic, __unused int retrieve)
{
s32 rx_status = mtdx.cur_rx->status;
int retval = 0;
if( ( rx_status & RXOWN ) != 0 )
{
return 0;
}
if (rx_status & ErrorSummary)
{ /* there was a fatal error */
printf( "%s: Receive error, Rx status %8.8x, Error(s) %s%s%s\n",
mtdx.nic_name, rx_status ,
(rx_status & (LONG | RUNT)) ? "length_error ":"",
(rx_status & RXER) ? "frame_error ":"",
(rx_status & CRC) ? "crc_error ":"" );
retval = 0;
} else if( !((rx_status & RXFSD) && (rx_status & RXLSD)) )
{
/* this pkt is too long, over one rx buffer */
printf("Pkt is too long, over one rx buffer.\n");
retval = 0;
} else
{ /* this received pkt is ok */
/* Omit the four octet CRC from the length. */
short pkt_len = ((rx_status & FLNGMASK) >> FLNGShift) - 4;
DBG ( " netdev_rx() normal Rx pkt length %d"
" status %x.\n", pkt_len, rx_status );
nic->packetlen = pkt_len;
memcpy(nic->packet, mtdx.cur_rx->skbuff, pkt_len);
retval = 1;
}
while( ( mtdx.cur_rx->status & RXOWN ) == 0 )
{
mtdx.cur_rx->status = RXOWN;
mtdx.cur_rx = mtdx.cur_rx->next_desc_logical;
}
/* Restart Rx engine if stopped. */
outl(0, mtdx.ioaddr + RXPDR);
return retval;
}
/**************************************************************************
TRANSMIT - Transmit a frame
***************************************************************************/
static void mtd_transmit(
struct nic *nic,
const char *dest, /* Destination */
unsigned int type, /* Type */
unsigned int size, /* size */
const char *data) /* Packet */
{
u32 to;
u32 tx_status;
unsigned int nstype = htons ( type );
memcpy( txb, dest, ETH_ALEN );
memcpy( txb + ETH_ALEN, nic->node_addr, ETH_ALEN );
memcpy( txb + 2 * ETH_ALEN, &nstype, 2 );
memcpy( txb + ETH_HLEN, data, size );
size += ETH_HLEN;
size &= 0x0FFF;
while( size < ETH_ZLEN )
{
txb[size++] = '\0';
}
mtdx.tx_ring[0].control = TXLD | TXFD | CRCEnable | PADEnable;
mtdx.tx_ring[0].control |= (size << PKTSShift); /* pkt size */
mtdx.tx_ring[0].control |= (size << TBSShift); /* buffer size */
mtdx.tx_ring[0].status = TXOWN;
/* Point to transmit descriptor */
outl(virt_to_bus(mtdx.tx_ring), mtdx.ioaddr + TXLBA);
/* Enable Tx */
outl( mtdx.crvalue | TxEnable, mtdx.ioaddr + TCRRCR);
/* Wake the potentially-idle transmit channel. */
outl(0, mtdx.ioaddr + TXPDR);
to = currticks() + TX_TIME_OUT;
while(( mtdx.tx_ring[0].status & TXOWN) && (currticks() < to));
/* Disable Tx */
outl( mtdx.crvalue & (~TxEnable), mtdx.ioaddr + TCRRCR);
tx_status = mtdx.tx_ring[0].status;
if (currticks() >= to){
DBG ( "TX Time Out" );
} else if( tx_status & (CSL | LC | EC | UDF | HF)){
printf( "Transmit error: %8.8x %s %s %s %s %s\n",
tx_status,
tx_status & EC ? "abort" : "",
tx_status & CSL ? "carrier" : "",
tx_status & LC ? "late" : "",
tx_status & UDF ? "fifo" : "",
tx_status & HF ? "heartbeat" : "" );
}
/*hex_dump( txb, size );*/
/*pause();*/
DBG ( "TRANSMIT\n" );
}
/**************************************************************************
DISABLE - Turn off ethernet interface
***************************************************************************/
static void mtd_disable ( struct nic *nic ) {
/* Disable Tx Rx*/
outl( mtdx.crvalue & (~TxEnable) & (~RxEnable), mtdx.ioaddr + TCRRCR );
/* Reset the chip to erase previous misconfiguration. */
mtd_reset(nic);
DBG ( "DISABLE\n" );
}
static struct nic_operations mtd_operations = {
.connect = dummy_connect,
.poll = mtd_poll,
.transmit = mtd_transmit,
.irq = dummy_irq,
};
static struct pci_device_id mtd80x_nics[] = {
PCI_ROM(0x1516, 0x0800, "MTD800", "Myson MTD800"),
PCI_ROM(0x1516, 0x0803, "MTD803", "Surecom EP-320X"),
PCI_ROM(0x1516, 0x0891, "MTD891", "Myson MTD891"),
};
PCI_DRIVER ( mtd80x_driver, mtd80x_nics, PCI_NO_CLASS );
/**************************************************************************
PROBE - Look for an adapter, this routine's visible to the outside
***************************************************************************/
static int mtd_probe ( struct nic *nic, struct pci_device *pci ) {
int i;
if (pci->ioaddr == 0)
return 0;
pci_fill_nic ( nic, pci );
adjust_pci_device(pci);
mtdx.nic_name = pci->name;
mtdx.dev_id = pci->device;
mtdx.ioaddr = nic->ioaddr;
/* read ethernet id */
for (i = 0; i < 6; ++i)
{
nic->node_addr[i] = inb(mtdx.ioaddr + PAR0 + i);
}
if (memcmp(nic->node_addr, "\0\0\0\0\0\0", 6) == 0)
{
return 0;
}
DBG ( "%s: ioaddr %4.4x MAC %s\n", mtdx.nic_name, mtdx.ioaddr, eth_ntoa ( nic->node_addr ) );
/* Reset the chip to erase previous misconfiguration. */
outl(0x00000001, mtdx.ioaddr + BCR);
/* find the connected MII xcvrs */
if( mtdx.dev_id != 0x803 )
{
int phy, phy_idx = 0;
for (phy = 1; phy < 32 && phy_idx < 1; phy++) {
int mii_status = mdio_read(nic, phy, 1);
if (mii_status != 0xffff && mii_status != 0x0000) {
mtdx.phys[phy_idx] = phy;
DBG ( "%s: MII PHY found at address %d, status "
"0x%4.4x.\n", mtdx.nic_name, phy, mii_status );
/* get phy type */
{
unsigned int data;
data = mdio_read(nic, mtdx.phys[phy_idx], 2);
if (data == SeeqPHYID0)
mtdx.PHYType = SeeqPHY;
else if (data == AhdocPHYID0)
mtdx.PHYType = AhdocPHY;
else if (data == MarvellPHYID0)
mtdx.PHYType = MarvellPHY;
else if (data == MysonPHYID0)
mtdx.PHYType = Myson981;
else if (data == LevelOnePHYID0)
mtdx.PHYType = LevelOnePHY;
else
mtdx.PHYType = OtherPHY;
}
phy_idx++;
}
}
mtdx.mii_cnt = phy_idx;
if (phy_idx == 0) {
printf("%s: MII PHY not found -- this device may "
"not operate correctly.\n", mtdx.nic_name);
}
} else {
mtdx.phys[0] = 32;
/* get phy type */
if (inl(mtdx.ioaddr + PHYIDENTIFIER) == MysonPHYID ) {
mtdx.PHYType = MysonPHY;
DBG ( "MysonPHY\n" );
} else {
mtdx.PHYType = OtherPHY;
DBG ( "OtherPHY\n" );
}
}
getlinkstatus(nic);
if( !mtdx.linkok )
{
printf("No link!!!\n");
return 0;
}
mtd_reset( nic );
/* point to NIC specific routines */
nic->nic_op = &mtd_operations;
return 1;
}
/**************************************************************************/
static void set_rx_mode(struct nic *nic __unused)
{
u32 mc_filter[2]; /* Multicast hash filter */
u32 rx_mode;
/* Too many to match, or accept all multicasts. */
mc_filter[1] = mc_filter[0] = ~0;
rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
outl(mc_filter[0], mtdx.ioaddr + MAR0);
outl(mc_filter[1], mtdx.ioaddr + MAR1);
mtdx.crvalue = ( mtdx.crvalue & ~RxModeMask ) | rx_mode;
outb( mtdx.crvalue, mtdx.ioaddr + TCRRCR);
}
/**************************************************************************/
static unsigned int m80x_read_tick(void)
/* function: Reads the Timer tick count register which decrements by 2 from */
/* 65536 to 0 every 1/36.414 of a second. Each 2 decrements of the */
/* count represents 838 nsec's. */
/* input : none. */
/* output : none. */
{
unsigned char tmp;
int value;
outb((char) 0x06, 0x43); // Command 8254 to latch T0's count
// now read the count.
tmp = (unsigned char) inb(0x40);
value = ((int) tmp) << 8;
tmp = (unsigned char) inb(0x40);
value |= (((int) tmp) & 0xff);
return (value);
}
static void m80x_delay(unsigned int interval)
/* function: to wait for a specified time. */
/* input : interval ... the specified time. */
/* output : none. */
{
unsigned int interval1, interval2, i = 0;
interval1 = m80x_read_tick(); // get initial value
do
{
interval2 = m80x_read_tick();
if (interval1 < interval2)
interval1 += 65536;
++i;
} while (((interval1 - interval2) < (u16) interval) && (i < 65535));
}
static u32 m80x_send_cmd_to_phy(long miiport, int opcode, int phyad, int regad)
{
u32 miir;
int i;
unsigned int mask, data;
/* enable MII output */
miir = (u32) inl(miiport);
miir &= 0xfffffff0;
miir |= MASK_MIIR_MII_WRITE + MASK_MIIR_MII_MDO;
/* send 32 1's preamble */
for (i = 0; i < 32; i++) {
/* low MDC; MDO is already high (miir) */
miir &= ~MASK_MIIR_MII_MDC;
outl(miir, miiport);
/* high MDC */
miir |= MASK_MIIR_MII_MDC;
outl(miir, miiport);
}
/* calculate ST+OP+PHYAD+REGAD+TA */
data = opcode | (phyad << 7) | (regad << 2);
/* sent out */
mask = 0x8000;
while (mask) {
/* low MDC, prepare MDO */
miir &= ~(MASK_MIIR_MII_MDC + MASK_MIIR_MII_MDO);
if (mask & data)
miir |= MASK_MIIR_MII_MDO;
outl(miir, miiport);
/* high MDC */
miir |= MASK_MIIR_MII_MDC;
outl(miir, miiport);
m80x_delay(30);
/* next */
mask >>= 1;
if (mask == 0x2 && opcode == OP_READ)
miir &= ~MASK_MIIR_MII_WRITE;
}
return miir;
}
static int mdio_read(struct nic *nic __unused, int phyad, int regad)
{
long miiport = mtdx.ioaddr + MANAGEMENT;
u32 miir;
unsigned int mask, data;
miir = m80x_send_cmd_to_phy(miiport, OP_READ, phyad, regad);
/* read data */
mask = 0x8000;
data = 0;
while (mask)
{
/* low MDC */
miir &= ~MASK_MIIR_MII_MDC;
outl(miir, miiport);
/* read MDI */
miir = inl(miiport);
if (miir & MASK_MIIR_MII_MDI)
data |= mask;
/* high MDC, and wait */
miir |= MASK_MIIR_MII_MDC;
outl(miir, miiport);
m80x_delay((int) 30);
/* next */
mask >>= 1;
}
/* low MDC */
miir &= ~MASK_MIIR_MII_MDC;
outl(miir, miiport);
return data & 0xffff;
}
#if 0 /* not used */
static void mdio_write(struct nic *nic __unused, int phyad, int regad,
int data)
{
long miiport = mtdx.ioaddr + MANAGEMENT;
u32 miir;
unsigned int mask;
miir = m80x_send_cmd_to_phy(miiport, OP_WRITE, phyad, regad);
/* write data */
mask = 0x8000;
while (mask)
{
/* low MDC, prepare MDO */
miir &= ~(MASK_MIIR_MII_MDC + MASK_MIIR_MII_MDO);
if (mask & data)
miir |= MASK_MIIR_MII_MDO;
outl(miir, miiport);
/* high MDC */
miir |= MASK_MIIR_MII_MDC;
outl(miir, miiport);
/* next */
mask >>= 1;
}
/* low MDC */
miir &= ~MASK_MIIR_MII_MDC;
outl(miir, miiport);
return;
}
#endif
static void getlinkstatus(struct nic *nic)
/* function: Routine will read MII Status Register to get link status. */
/* input : dev... pointer to the adapter block. */
/* output : none. */
{
unsigned int i, DelayTime = 0x1000;
mtdx.linkok = 0;
if (mtdx.PHYType == MysonPHY)
{
for (i = 0; i < DelayTime; ++i) {
if (inl(mtdx.ioaddr + BMCRSR) & LinkIsUp2) {
mtdx.linkok = 1;
return;
}
// delay
m80x_delay(100);
}
} else
{
for (i = 0; i < DelayTime; ++i) {
if (mdio_read(nic, mtdx.phys[0], MII_BMSR) & BMSR_LSTATUS) {
mtdx.linkok = 1;
return;
}
// delay
m80x_delay(100);
}
}
}
static void getlinktype(struct nic *dev)
{
if (mtdx.PHYType == MysonPHY)
{ /* 3-in-1 case */
if (inl(mtdx.ioaddr + TCRRCR) & FD)
mtdx.duplexmode = 2; /* full duplex */
else
mtdx.duplexmode = 1; /* half duplex */
if (inl(mtdx.ioaddr + TCRRCR) & PS10)
mtdx.line_speed = 1; /* 10M */
else
mtdx.line_speed = 2; /* 100M */
} else
{
if (mtdx.PHYType == SeeqPHY) { /* this PHY is SEEQ 80225 */
unsigned int data;
data = mdio_read(dev, mtdx.phys[0], MIIRegister18);
if (data & SPD_DET_100)
mtdx.line_speed = 2; /* 100M */
else
mtdx.line_speed = 1; /* 10M */
if (data & DPLX_DET_FULL)
mtdx.duplexmode = 2; /* full duplex mode */
else
mtdx.duplexmode = 1; /* half duplex mode */
} else if (mtdx.PHYType == AhdocPHY) {
unsigned int data;
data = mdio_read(dev, mtdx.phys[0], DiagnosticReg);
if (data & Speed_100)
mtdx.line_speed = 2; /* 100M */
else
mtdx.line_speed = 1; /* 10M */
if (data & DPLX_FULL)
mtdx.duplexmode = 2; /* full duplex mode */
else
mtdx.duplexmode = 1; /* half duplex mode */
}
/* 89/6/13 add, (begin) */
else if (mtdx.PHYType == MarvellPHY) {
unsigned int data;
data = mdio_read(dev, mtdx.phys[0], SpecificReg);
if (data & Full_Duplex)
mtdx.duplexmode = 2; /* full duplex mode */
else
mtdx.duplexmode = 1; /* half duplex mode */
data &= SpeedMask;
if (data == Speed_1000M)
mtdx.line_speed = 3; /* 1000M */
else if (data == Speed_100M)
mtdx.line_speed = 2; /* 100M */
else
mtdx.line_speed = 1; /* 10M */
}
/* 89/6/13 add, (end) */
/* 89/7/27 add, (begin) */
else if (mtdx.PHYType == Myson981) {
unsigned int data;
data = mdio_read(dev, mtdx.phys[0], StatusRegister);
if (data & SPEED100)
mtdx.line_speed = 2;
else
mtdx.line_speed = 1;
if (data & FULLMODE)
mtdx.duplexmode = 2;
else
mtdx.duplexmode = 1;
}
/* 89/7/27 add, (end) */
/* 89/12/29 add */
else if (mtdx.PHYType == LevelOnePHY) {
unsigned int data;
data = mdio_read(dev, mtdx.phys[0], SpecificReg);
if (data & LXT1000_Full)
mtdx.duplexmode = 2; /* full duplex mode */
else
mtdx.duplexmode = 1; /* half duplex mode */
data &= SpeedMask;
if (data == LXT1000_1000M)
mtdx.line_speed = 3; /* 1000M */
else if (data == LXT1000_100M)
mtdx.line_speed = 2; /* 100M */
else
mtdx.line_speed = 1; /* 10M */
}
// chage crvalue
// mtdx.crvalue&=(~PS10)&(~FD);
mtdx.crvalue &= (~PS10) & (~FD) & (~PS1000);
if (mtdx.line_speed == 1)
mtdx.crvalue |= PS10;
else if (mtdx.line_speed == 3)
mtdx.crvalue |= PS1000;
if (mtdx.duplexmode == 2)
mtdx.crvalue |= FD;
}
}
DRIVER ( "MTD80X", nic_driver, pci_driver, mtd80x_driver,
mtd_probe, mtd_disable );
