diff options
Diffstat (limited to 'contrib/baremetal/Makefile')
-rw-r--r-- | contrib/baremetal/Makefile | 475 |
1 files changed, 0 insertions, 475 deletions
diff --git a/contrib/baremetal/Makefile b/contrib/baremetal/Makefile deleted file mode 100644 index df4de762..00000000 --- a/contrib/baremetal/Makefile +++ /dev/null @@ -1,475 +0,0 @@ -# -# Makefile for Etherboot -# -# Most of the time you should edit Config -# -# Common options: -# VERSION=v - Set the version string -# -# NS8390 options: -# -DINCLUDE_NE - Include NE1000/NE2000 support -# -DNE_SCAN=list - Probe for NE base address using list of -# comma separated hex addresses -# -DINCLUDE_3C503 - Include 3c503 support -# -DT503_SHMEM - Use 3c503 shared memory mode (off by default) -# -DINCLUDE_WD - Include Western Digital/SMC support -# -DWD_DEFAULT_MEM- Default memory location for WD/SMC cards -# -DCOMPEX_RL2000_FIX -# -# If you have a Compex RL2000 PCI 32-bit (11F6:1401), -# and the bootrom hangs in "Probing...[NE*000/PCI]", -# try enabling this fix... it worked for me :). -# In the first packet write somehow it somehow doesn't -# get back the expected data so it is stuck in a loop. -# I didn't bother to investigate what or why because it works -# when I interrupt the loop if it takes more then COMPEX_RL2000_TRIES. -# The code will notify if it does a abort. -# SomniOne - somnione@gmx.net -# -# 3C509 option: -# -DINCLUDE_3C509 - Include 3c509 support -# -# 3C90X options: -# -DINCLUDE_3C90X - Include 3c90x support -# -DCFG_3C90X_PRESERVE_XCVR - Reset the transceiver type to the value it -# had initially just before the loaded code is started. -# -DCFG_3C90X_XCVR - Hardcode the tranceiver type Etherboot uses. -# -DCFG_3C90X_BOOTROM_FIX - If you have a 3c905B with buggy ROM -# interface, setting this option might "fix" it. Use -# with caution and read the docs in 3c90x.txt! -# -# See the documentation file 3c90x.txt for more details. -# -# CS89X0 (optional) options: -# -DINCLUDE_CS89X0- Include CS89x0 support -# -DCS_SCAN=list - Probe for CS89x0 base address using list of -# comma separated hex addresses; increasing the -# address by one (0x300 -> 0x301) will force a -# more aggressive probing algorithm. This might -# be neccessary after a soft-reset of the NIC. -# -# LANCE options: -# -DINCLUDE_NE2100- Include NE2100 support -# -DINCLUDE_NI6510- Include NI6510 support -# -# SK_G16 options: -# -DINCLUDE_SK_G16- Include SK_G16 support -# -# I82586 options: -# -DINCLUDE_3C507 - Include 3c507 support -# -DINCLUDE_NI5210- Include NI5210 support -# -DINCLUDE_EXOS205-Include EXOS205 support -# -# SMC9000 options: -# -DINCLUDE_SMC9000 - Include SMC9000 driver -# -DSMC9000_SCAN=list - List of I/O addresses to probe -# -# TIARA (Fujitsu Etherstar) options: -# -DINCLUDE_TIARA - Include Tiara support -# -# NI5010 options: -# -DINCLUDE_NI5010 - Include NI5010 support -# -# TULIP options: -# -DINCLUDE_TULIP - Include Tulip support -# -DUSE_INTERNAL_BUFFER - receuve and transmit buffers within program -# space, not below 0x10000, in case that region is used -# -# RTL8139 options: -# -DINCLUDE_RTL8139 - Include RTL8139 support -# -DUSE_INTERNAL_BUFFER - 8 kB receive buffer within program space, -# not at 0x10000 - 8kB, in case that region is used -# - -include Config - -GCC= gcc -CPP= gcc -E -VERSION= 4.6.12 -CFLAGS16+= -DVERSION=\"$(VERSION)\" -DRELOC=$(RELOCADDR) -CFLAGS32+= -DVERSION=\"$(VERSION)\" -DRELOC=$(RELOCADDR) $(OLDGAS) -LCONFIG+= -DRELOC=$(RELOCADDR) - -IDENT16= 'Etherboot/16 $(VERSION) (GPL) $(@F)' -IDENT32= 'Etherboot/32 $(VERSION) (GPL) $(@F)' - -# Find out if we're using binutils 2.9.1 which uses a different syntax in some -# places (most prominently in the opcode prefix area). -OLDGAS:= $(shell $(AS) --version | grep -q '2\.9\.1' && echo -DGAS291) - -# Check the requested type of build (32, 16 or both families) -ifeq ($(ETHERBOOT),16) -BUILD_LIBS= $(BLIB16) -BUILD_BINS= $(BINS16) -endif -ifeq ($(ETHERBOOT),32) -BUILD_LIBS= $(BLIB32) -BUILD_BINS= $(BINS32) -endif -ifeq ($(ETHERBOOT),both) -BUILD_LIBS= $(BLIB16) $(BLIB32) -BUILD_BINS= $(BINS16) $(BINS32) -endif - -3C503FLAGS= -DINCLUDE_3C503 # -DT503_SHMEM -# Note that the suffix to MAKEROM_ is the (mixed case) basename of the ROM file -MAKEROM_3c503= -3 -3C507FLAGS= -DINCLUDE_3C507 -3C509FLAGS= -DINCLUDE_3C509 -3C529FLAGS= -DINCLUDE_3C529 -3C595FLAGS= -DINCLUDE_3C595 -3C90XFLAGS= -DINCLUDE_3C90X -CS89X0FLAGS= -DINCLUDE_CS89X0 -EEPROFLAGS= -DINCLUDE_EEPRO -EEPRO100FLAGS= -DINCLUDE_EEPRO100 -EPIC100FLAGS= -DINCLUDE_EPIC100 -EXOS205FLAGS= -DINCLUDE_EXOS205 -LANCEFLAGS= -DINCLUDE_LANCE # Lance/PCI! -NE2100FLAGS= -DINCLUDE_NE2100 -NEFLAGS= -DINCLUDE_NE -DNE_SCAN=0x300,0x280,0x320,0x340,0x380 -NS8390FLAGS= -DINCLUDE_NS8390 # NE2000/PCI! -NI5010FLAGS= -DINCLUDE_NI5010 -NI5210FLAGS= -DINCLUDE_NI5210 -NI6510FLAGS= -DINCLUDE_NI6510 -RTL8139FLAGS= -DINCLUDE_RTL8139 -SK_G16FLAGS= -DINCLUDE_SK_G16 -SMC9000FLAGS= -DINCLUDE_SMC9000 -TIARAFLAGS= -DINCLUDE_TIARA -DEPCAFLAGS= -DINCLUDE_DEPCA # -DDEPCA_MODEL=DEPCA -DDEPCA_RAM_BASE=0xd0000 -TULIPFLAGS= -DINCLUDE_TULIP -OTULIPFLAGS= -DINCLUDE_OTULIP -VIA_RHINEFLAGS= -DINCLUDE_VIA_RHINE -WDFLAGS= -DINCLUDE_WD -DWD_DEFAULT_MEM=0xCC000 -W89C840FLAGS= -DINCLUDE_W89C840 - -# If you have not made any changes to the *.S files, AS86 need not be set. -# (most people) -# If you have made changes to the *.S files and you want to rebuild *loader.bin -# and {floppy,com}load.bin and you have as86 from the ELKS Dev86 package (not -# the one that normally comes with Linux) (not most people) -#AS86= as86 -# If you have made changes to the *.S files and you want to rebuild *loader.bin -# and {floppy,com}load.bin and you have nasm (not most people) -#AS86= nasm - -# if your as has trouble with the data32 directive, uncomment this -# but note that the premade start*.o will be larger than necessary because it -# contains some routines which may not be used -#AS_PSEUDOS= n - -SRCS= floppyload.S comload.S liloprefix.S loader.S start16.S start32.S serial.S startmpcc.S -SRCS+= main.c pci.c osloader.c nfs.c misc.c ansiesc.c bootmenu.c config.c -SRCS+= md5.c floppy.c - -# ROM loaders: LZ version (prefix Z), PCI header version (prefix P) -ifndef AS86 -RLOADER= rloader.bin.pre -PRLOADER= prloader.bin.pre -RZLOADER= rzloader.bin.pre -PRZLOADER= przloader.bin.pre -FLOPPYLOAD= floppyload.bin.pre -COMLOAD= comload.bin.pre -LILOPREFIX= liloprefix.bin.pre -else -RLOADER= bin/rloader.bin -PRLOADER= bin/prloader.bin -RZLOADER= bin/rzloader.bin -PRZLOADER= bin/przloader.bin -FLOPPYLOAD= bin/floppyload.bin -COMLOAD= bin/comload.bin -LILOPREFIX= bin/liloprefix.bin -endif - -ifeq ($(AS86),as86) -LCPPFLAGS+= -DUSE_AS86 -LASFLAGS+= $(AS86FLAGS) -0 -LASBINARY:= -b -endif -ifeq ($(AS86),nasm) -LCPPFLAGS+= -DUSE_NASM -LASFLAGS+= $(NASMFLAGS) -fbin -LASBINARY:= -o -endif - -ifeq ($(AS_PSEUDOS),n) -START16= start16.o.pre -START32= start32.o.pre -else -START16= bin16/start16.o -START32= bin32/startmpcc.o -endif - -BOBJS16= bin16/main.o bin16/osloader.o bin16/misc.o bin16/bootmenu.o -BOBJS16+= bin16/floppy.o bin16/timer.o -BOBJS32= bin32/main.o bin32/osloader.o bin32/nfs.o bin32/misc.o -BOBJS32+= bin32/ansiesc.o bin32/bootmenu.o bin32/md5.o bin32/floppy.o -BOBJS32+= bin32/serial.o bin32/timer.o -BLIB16= bin16/bootlib.a -BLIB32= bin32/bootlib.a -LIBS16= $(BLIB16) $(LIBC16) -LIBS32= $(BLIB32) $(LIBC32) /usr/lib/gcc-lib/i386-redhat-linux/2.96/libgcc.a -UTIL_LZHUF:= $(shell if [ -d ../contrib/compressor ]; then echo bin/lzhuf; fi) -UTILS+= bin/makerom $(UTIL_LZHUF) bin/organon -STDDEPS16= $(START16) $(BLIB16) $(UTILS) -STDDEPS32= $(START32) $(BLIB32) $(UTILS) -MAKEDEPS= Makefile Config Roms - -CHECKSIZE= { read d1; read d1 d2 d3 size d4; [ $$size -gt $(ROMLIMIT) ] &&\ - { $(RM) $@; echo "ERROR: code size exceeds limit!"; exit 1; }; exit 0; } - -# Make sure that the relocation address is acceptable for all ROM sizes. -# Setting it to 0x98000 leaves about 29kB of space for the Etherboot program. -# The check is done based running 'size' on the binary, not ROM size, but -# roughly this means a ROM of 16kB or a partially used ROM of 32kB, -# remembering to compressed ROM images into account. -# You may also set RELOCADDR to 0x88000 to avoid using 0x98000 -# because of other drivers (e.g. Disk On Chip). In that case, you may -# only load 512kB of OS, or load in memory above 1MB. -# Don't forget to choose an assembler because the loaders have to be rebuilt. -ifndef RELOCADDR -RELOCADDR=0x98000 -#RELOCADDR=0xe0000 -endif - -# Evaluate ROMLIMIT only once - it is constant during the make run. -# Note that the 3K safety margin below is for the 1K extended BIOS data area -# and for the Etherboot runtime stack. Under normal situations, 2K of stack -# are rarely needed. If you experience strange behaviour in functions that use -# many local variables or that call functions that do, check for stack overrun! -# Make sure that the normal case needs no perl interpreter - if someone uses a -# different RELOCADDR, then he has perl installed anyways (the shell cannot -# deal with hex numbers, as test/eval don't support non-decimal integers). -ifeq ($(RELOCADDR),0x98000) -ROMLIMIT=29696 -else -ROMLIMIT:=$(shell perl -e 'print 0x10000 - 3072 - ($(RELOCADDR) & 0xFFFF), "\n";') -endif - -# Start of targets - -all: $(UTILS) $(BUILD_LIBS) allbins - -include Roms - -# We need allbins because $(BINS16) and $(BINS32) are not defined until -# the Makefile fragment "Roms" is read. - -allbins: $(BUILD_BINS) - -# Common files - -$(BLIB16): $(BOBJS16) - $(AR16) rv $@ $(BOBJS16) - $(RANLIB16) $@ - -$(BLIB32): $(BOBJS32) - $(AR32) rv $@ $(BOBJS32) - $(RANLIB32) $@ - -bin16/main.o: main.c etherboot.h osdep.h nic.h -bin32/main.o: main.c etherboot.h osdep.h nic.h - -bin16/osloader.o: osloader.c etherboot.h osdep.h -bin32/osloader.o: osloader.c etherboot.h osdep.h - -# NFS currently makes no sense for Etherboot/16 -bin32/nfs.o: nfs.c etherboot.h osdep.h nic.h - -bin16/misc.o: misc.c etherboot.h osdep.h -bin32/misc.o: misc.c etherboot.h osdep.h - -# ANSIESC is not supported for Etherboot/16 -bin32/ansiesc.o: ansiesc.c etherboot.h osdep.h - -bin16/bootmenu.o: bootmenu.c etherboot.h osdep.h -bin32/bootmenu.o: bootmenu.c etherboot.h osdep.h - -# Password support is not available for Etherboot/16 -bin32/md5.o: md5.c etherboot.h osdep.h - -bin16/floppy.o: floppy.c etherboot.h osdep.h -bin32/floppy.o: floppy.c etherboot.h osdep.h - -bin16/timer.o: timer.c timer.h etherboot.h osdep.h -bin32/timer.o: timer.c timer.h etherboot.h osdep.h - -bin32/inthw.o: inthw.c - -# PCI support code (common to all PCI drivers) - -bin32/pci.o: pci.c pci.h - -# Do not add driver specific dependencies here unless it's something the -# genrules.pl script *can't* deal with, i.e. if it is not C code. - -# Prepended loaders - -#ifndef AS86 -#$(RLOADER) $(RZLOADER) $(PRLOADER) $(PRZLOADER): $(MAKEDEPS) -# @if [ $(RELOCADDR) != 0x98000 ]; then echo Non-standard RELOCADDR, must assemble $@; exit 1; fi -# $(TOUCH) $@ -#else -#bin/rloader.s: loader.S $(MAKEDEPS) -# $(CPP) $(LCPPFLAGS) $(LCONFIG) -o $@ $< -# -#bin/rzloader.s: loader.S $(MAKEDEPS) -# $(CPP) $(LCPPFLAGS) $(LCONFIG) -DZLOADER -o $@ $< -# -#bin/prloader.s: loader.S $(MAKEDEPS) -# $(CPP) $(LCPPFLAGS) $(LCONFIG) -DPCI_PNP_HEADER -o $@ $< -# -#bin/przloader.s: loader.S $(MAKEDEPS) -# $(CPP) $(LCPPFLAGS) $(LCONFIG) -DPCI_PNP_HEADER -DZLOADER -o $@ $< -#endif - -# Floppy loader - -ifdef AS86 -bin/floppyload.s: floppyload.S $(MAKEDEPS) - $(CPP) $(LCPPFLAGS) -o $@ $< -endif - -# COM loader - -ifdef AS86 -bin/comload.s: comload.S $(MAKEDEPS) - $(CPP) $(LCPPFLAGS) -o $@ $< -endif - -# LILO prefix: - -ifdef AS86 -bin/liloprefix.s: liloprefix.S $(MAKEDEPS) - $(CPP) $(LCPPFLAGS) -o $@ $< -endif - -# Utilities - -bin/makerom: makerom.c - $(GCC) -O2 -o $@ makerom.c - -bin/organon: organon.c - $(GCC) -o $@ organon.c - -bin/lzhuf: ../contrib/compressor/lzhuf.c - $(GCC) -O2 -DENCODE -DDECODE -DMAIN -DVERBOSE -o $@ $< - -# Roms file - -Roms: NIC genrules.pl - @chmod +x genrules.pl - ./genrules.pl NIC > $@ - -# Pattern Rules - -# general rules for compiling/assembling source files -bin16/%.o: %.c $(MAKEDEPS) - $(CC16) $(CFLAGS16) -o $@ -c $< - -bin32/%.o: %.c $(MAKEDEPS) - $(CC32) $(CFLAGS32) -o $@ -c $< - -bin16/%.o: %.S $(MAKEDEPS) - $(CC16) $(CFLAGS16) $(ASFLAGS16) -c -o $@ $< - -bin32/%.o: %.S $(MAKEDEPS) - $(CPP) $(CFLAGS32) $< | $(AS) $(ASFLAGS32) -o $@ - -# general rule for .bin (plain binary loader code), may be overridden -ifdef AS86 -bin/%.bin: bin/%.s - $(AS86) $(LASFLAGS) $(LASBINARY) $@ $< -endif - -# general rule for .huf (compressed binary code), may be overridden -%.huf: %.img - bin/lzhuf e $< $@ - -# general rules for normal/compressed ROM images, may be overridden -bin16/%.rom: bin16/%.img $(RLOADER) - cat $(RLOADER) $< > $@ - bin/makerom $(MAKEROM_$*) -i$(IDENT16) $@ - -bin32/%.rom: bin32/%.img $(RLOADER) - cat $(RLOADER) $< > $@ - bin/makerom $(MAKEROM_$*) -i$(IDENT32) $@ - -bin16/%.lzrom: bin16/%.huf $(RZLOADER) - cat $(RZLOADER) $< > $@ - bin/makerom $(MAKEROM_$*) -i$(IDENT16) $@ - -bin32/%.lzrom: bin32/%.huf $(RZLOADER) - cat $(RZLOADER) $< > $@ - bin/makerom $(MAKEROM_$*) -i$(IDENT32) $@ - -# rules to write the .rom/.lzrom image onto a blank floppy -# You must give the directory name, e.g. use bin32/rtl8139.lzfd0 as the target. -%.fd0: %.rom $(FLOPPYLOAD) - cat $(FLOPPYLOAD) $< > /dev/fd0 - -%.lzfd0: %.lzrom $(FLOPPYLOAD) - cat $(FLOPPYLOAD) $< > /dev/fd0 - -# rules to generate a .com executable -# You must give the directory name, e.g. use bin32/rtl8139.com as the target. -%.com: %.lzrom $(COMLOAD) - cat $(COMLOAD) $< > $@ - -# rules to make a floppy image (padding to fill an even number of cylinders). -# VMware reports floppy image read errors if it cannot read ahead 36 sectors, -# probably because the floppyload.S code reads up to that number of sectors in -# a single request. Not that 18k matters much these days... -# You must give the directory name, e.g. use bin32/rtl8139.fdimg as the target. -%.fdimg: %.rom $(FLOPPYLOAD) - cat $(FLOPPYLOAD) $< > $@.x - dd if=$@.x of=$@ bs=36k conv=sync 2> /dev/null - $(RM) $@.x - -%.lzfdimg: %.lzrom $(FLOPPYLOAD) - cat $(FLOPPYLOAD) $< > $@.x - dd if=$@.x of=$@ bs=36k conv=sync 2> /dev/null - $(RM) $@.x - -# rules to make a LILO-bootable image -%.lilo: %.rom $(LILOPREFIX) - cat $(LILOPREFIX) $< /dev/zero | head -c 64k > $@ - -%.lzlilo: %.lzrom $(LILOPREFIX) - cat $(LILOPREFIX) $< /dev/zero | head -c 64k > $@ - -# Housekeeping - -# To make sure that this actually builds a start32.o.pre with all options set, -# you have to make sure that -DFLOPPY -DANSIESC -DCONSOLE_DUAL are in CFLAGS32. -precompiled: bin/rloader.bin bin/rzloader.bin bin/prloader.bin bin/przloader.bin bin/floppyload.bin bin/comload.bin bin16/start16.o bin32/start32.o bin/liloprefix.bin - cp -p bin/rloader.bin rloader.bin.pre - cp -p bin/rzloader.bin rzloader.bin.pre - cp -p bin/prloader.bin prloader.bin.pre - cp -p bin/przloader.bin przloader.bin.pre - cp -p bin/floppyload.bin floppyload.bin.pre - cp -p bin/comload.bin comload.bin.pre - cp -p bin16/start16.o start16.o.pre - cp -p bin32/start32.o start32.o.pre - cp -p bin/liloprefix.bin liloprefix.bin.pre - -clean: - $(RM) $(UTILS) bin/*.s bin/*.bin - $(RM) $(BLIB16) $(BLIB32) - $(RM) bin16/*.o bin32/*.o bin16/*.tmp bin32/*.tmp - $(RM) bin16/*.img bin32/*.img bin16/*.huf bin32/*.huf - $(RM) bin16/*.rom bin32/*.rom bin16/*.lzrom bin32/*.lzrom - $(RM) bin16/*.com bin32/*.com - $(RM) bin16/*.fdimg bin32/*.fdimg bin16/*.lzfdimg bin32/*.lzfdimg - $(RM) bin16/*.lilo bin32/*.lilo bin16/*.lzlilo bin32/*.lzlilo - $(RM) bin32/*.hex - $(RM) bin32/*.asm - $(RM) bin32/*.map - -tarball: - (echo -n $(VERSION) ''; date -u +'%Y-%m-%d') > ../VERSION - (cd ..; tar cf /tmp/mpccboot-$(VERSION).tar --exclude CVS mpccboot) - bzip2 -9 < /tmp/mpccboot-$(VERSION).tar > /tmp/mpccboot-$(VERSION).tar.bz2 - gzip -9 < /tmp/mpccboot-$(VERSION).tar > /tmp/mpccboot-$(VERSION).tar.gz - -version: - @echo $(VERSION) |