summaryrefslogtreecommitdiffstats
path: root/src/drivers
Commit message (Collapse)AuthorAgeFilesLines
* [smsc75xx] Move RX FIFO overflow message to DBGLVL_EXTRAMichael Brown2015-03-121-1/+2
| | | | | | | | | | | | | | RX FIFO overflow is almost inevitable since the (usable) USB2 bus bandwidth is approximately one quarter of the Ethernet bandwidth. Avoid flooding the console with RX FIFO overflow messages in a standard debug build. With TCP SACK implemented, the RX FIFO overflow no longer causes a catastrophic drop in throughput. Experimentation shows that HTTP downloads now progress at a fairly smooth 250Mbps, which is around the maximum speed attainable for a USB2 NIC. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [smsc75xx] Add driver for SMSC/Microchip LAN75xx USB Ethernet NICsMichael Brown2015-03-112-0/+1365
| | | | | | | | | | | | | | | | | | | This driver is functional but any downloads via a TCP-based protocol tend to perform poorly. The 1Gbps Ethernet line rate is substantially higher than the 480Mbps (in practice around 280Mbps) provided by USB2, and the device has only 32kB of internal buffer memory. Our 256kB TCP receive window therefore rapidly overflows the RX FIFO, leading to multiple dropped packets (usually within the same TCP window) and hence a low overall throughput. Reducing the TCP window size so that the RX FIFO does not overflow greatly increases throughput, but is not a general-purpose solution. Further investigation is required to determine how other OSes (e.g. Linux) cope with this scenario. It is possible that implementing TCP SACK would provide some benefit. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [mii] Add generic mii_check_link() functionMichael Brown2015-03-101-0/+32
| | | | | | | | | | | | Most devices expose at least the link up/down status via a bit in a MAC register, since the MAC generally already needs to know whether or not the link is up. Some devices (e.g. the SMSC75xx USB NIC) expose this information to software only via the MII registers. Provide a generic mii_check_link() implementation to check the BMSR and report the link status via netdev_link_{up,down}(). Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [legal] Relicense Davicom DM96xx driversMichael Brown2015-03-102-2/+6
| | | | | Reported-by: Robin Smidsrød <robin@smidsrod.no> Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [dm96xx] Add driver for Davicom DM96xx USB Ethernet NICsMichael Brown2015-03-092-0/+861
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [intel] Add PCI ID for I218-LMThomas Miletich2015-03-091-0/+1
| | | | | Signed-off-by: Thomas Miletich <thomas.miletich@gmail.com> Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [xen] Set the "feature-rx-notify" flag for netfront devicesMichael Brown2015-03-091-0/+8
| | | | | | | | | | | | iPXE already sends RX notifications to the backend when needed, but does not set the "feature-rx-notify" flag. As of XenServer 6.5, this flag is mandatory and omitting it will cause the backend to fail. Fix by setting the "feature-rx-notify" flag, to inform the backend that we will send notifications. Reported-by: Shalom Bhooshi <shalom.bhooshi@citrix.com> Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [xhci] Undo PCH-specific quirk fixes when removing deviceMichael Brown2015-03-062-17/+51
| | | | | | | | Restore the original values of XUSB2PR and USB3PSSEN, in case we are booting an OS with no support for xHCI. Suggested-by: Dan Ellis <Dan.Ellis@displaylink.com> Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [xhci] Enable USB3 ports on Intel PCH8/PCH9 controllersMichael Brown2015-03-062-0/+55
| | | | | | | | | | Intel PCH controllers default to routing USB2 ports to EHCI rather than xHCI, and default to disabling SuperSpeed connections. Manipulate the PCI configuration space registers as necessary to reroute ports and enable SuperSpeed. Originally-fixed-by: Dan Ellis <Dan.Ellis@displaylink.com> Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [legal] Relicense files under GPL2_OR_LATER_OR_UBDLMichael Brown2015-03-052-2/+2
| | | | | | | | | | | Relicense files with kind permission from Stefan Hajnoczi <stefanha@redhat.com> alongside the contributors who have already granted such relicensing permission. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [build] Fix the REQUIRE_SYMBOL mechanismMichael Brown2015-03-054-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | At some point in the past few years, binutils became more aggressive at removing unused symbols. To function as a symbol requirement, a relocation record must now be in a section marked with @progbits and must not be in a section which gets discarded during the link (either via --gc-sections or via /DISCARD/). Update REQUIRE_SYMBOL() to generate relocation records meeting these criteria. To minimise the impact upon the final binary size, we use existing symbols (specified via the REQUIRING_SYMBOL() macro) as the relocation targets where possible. We use R_386_NONE or R_X86_64_NONE relocation types to prevent any actual unwanted relocation taking place. Where no suitable symbol exists for REQUIRING_SYMBOL() (such as in config.c), the macro PROVIDE_REQUIRING_SYMBOL() can be used to generate a one-byte-long symbol to act as the relocation target. If there are versions of binutils for which this approach fails, then the fallback will probably involve killing off REQUEST_SYMBOL(), redefining REQUIRE_SYMBOL() to use the current definition of REQUEST_SYMBOL(), and postprocessing the linked ELF file with something along the lines of "nm -u | wc -l" to check that there are no undefined symbols remaining. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [build] Use REQUIRE_OBJECT() to drag in per-object configurationMichael Brown2015-03-051-0/+3
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [pci] Rewrite unrelicensable portions of pci.hMichael Brown2015-03-0310-25/+23Star
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [pci] Remove outdated and mostly-unused pci_ids.h fileMichael Brown2015-03-023-0/+7
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [libc] Rewrite byte-swapping codeMichael Brown2015-03-021-3/+3
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [legal] Relicense files under GPL2_OR_LATER_OR_UBDLMichael Brown2015-03-022-2/+6
| | | | | | | | | | These files cannot be automatically relicensed by util/relicense.pl since they either contain unusual but trivial contributions (such as the addition of __nonnull function attributes), or contain lines dating back to the initial git revision (and so require manual knowledge of the code's origin). Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [legal] Relicense files under GPL2_OR_LATER_OR_UBDLMichael Brown2015-03-021-1/+5
| | | | | | | | | | | | | | | Relicence files with kind permission from the following contributors: Alex Williamson <alex.williamson@redhat.com> Eduardo Habkost <ehabkost@redhat.com> Greg Jednaszewski <jednaszewski@gmail.com> H. Peter Anvin <hpa@zytor.com> Marin Hannache <git@mareo.fr> Robin Smidsrød <robin@smidsrod.no> Shao Miller <sha0.miller@gmail.com> Thomas Horsten <thomas@horsten.com> Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [legal] Relicense files under GPL2_OR_LATER_OR_UBDLMichael Brown2015-03-0256-56/+224
| | | | | | | Relicense files for which I am the sole author (as identified by util/relicense.pl). Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [legal] Include full licence text for all GPL2_OR_LATER filesMichael Brown2015-02-265-10/+60
| | | | | | | | Add the standard warranty disclaimer and Free Software Foundation address paragraphs to the licence text where these are not currently present. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [xhci] Abort commands on timeoutMichael Brown2015-02-182-15/+82
| | | | | | | | | | | | When a command times out, abort it (via the Command Abort bit in the Command Ring Control Register) so that subsequent commands may execute as expected. This improves robustness when a device fails to respond to the Set Address command, since the subsequent Disable Slot command will now succeed. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [xhci] Leak memory if controller fails to disable slotMichael Brown2015-02-181-3/+18
| | | | | | | | | | | | | | | | If the Disable Slot command fails then the hardware may continue to write to the slot context. Leak the memory used by the slot context to avoid future memory corruption. This situation has been observed in practice when a Set Address command fails, causing the command ring to become temporarily unresponsive. Note that there is no need to similarly leak memory on the failure path in xhci_device_open(), since in the event of a failure the hardware is never informed of the slot context address. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [ncm] Use generic USB network device frameworkMichael Brown2015-02-172-235/+58Star
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [ecm] Use generic USB network device frameworkMichael Brown2015-02-172-211/+35Star
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [usb] Add generic USB network device frameworkMichael Brown2015-02-171-0/+280
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [ncm] Use generic refill framework for bulk IN and interrupt endpointsMichael Brown2015-02-162-252/+92Star
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [ecm] Use generic refill framework for bulk IN and interrupt endpointsMichael Brown2015-02-132-133/+40Star
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [usb] Use generic refill framework for USB hub interrupt endpointsMichael Brown2015-02-132-51/+7Star
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [usb] Provide generic framework for refilling receive endpointsMichael Brown2015-02-131-0/+128
| | | | | | | Provide a generic framework for allocating, refilling, and optionally recycling I/O buffers used by bulk IN and interrupt endpoints. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [usb] Handle port status changes received after failing to find a driverMichael Brown2015-02-121-5/+13
| | | | | | | | | | | | | | | | | | | | | Commit a60f2dd ("[usb] Try multiple USB device configurations") changed the behaviour of register_usb() such that if no drivers are found then the device will be closed and the memory used will be freed. If a port status change subsequently occurs while the device is still physically attached, then usb_hotplug() will see this as a new device having been attached, since there is no device recorded as being currently attached to the port. This can lead to spurious hotplug events (or even endless loops of hotplug events, if the process of opening and closing the device happens to generate a port status change). Fix by using a separate flag to indicate that a device is physically attached (even if we have no corresponding struct usb_device). Reported-by: Dan Ellis <Dan.Ellis@displaylink.com> Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [xhci] Delay after (possibly) forcing port link state to RxDetectMichael Brown2015-02-112-0/+8
| | | | | | | | | | | | Some xHCI controllers (observed with a Renesas Electronics PCIe USB3 card) seem to require a delay after forcing the link state of USB3 ports to RxDetect. Omitting this delay causes strange behaviour including system lockups. Add an unconditional 20ms delay after writing the port link states. This seems to be sufficient to avoid the problem. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [ecm] Add support for CDC-ECM USB Ethernet devicesMichael Brown2015-02-102-1/+750
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [usb] Allow usb_stream() to enforce a terminating short packetMichael Brown2015-02-104-11/+23
| | | | | | | | | | Some USB endpoints require that a short packet be used to terminate transfers, since they have no other way to determine message boundaries. If the message length happens to be an exact multiple of the USB packet size, then this requires the use of an additional zero-length packet. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [usb] Parse endpoint descriptor bInterval fieldMichael Brown2015-02-103-4/+38
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [usb] Handle CDC union functional descriptorsMichael Brown2015-02-092-3/+83
| | | | | | | USB Communications Device Class devices may use a union functional descriptor to group several interfaces into a function. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [usb] Try multiple USB device configurationsMichael Brown2015-02-091-69/+134
| | | | | | | Iterate over a USB device's available configurations until we find one for which we have working drivers. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [ncm] Reserve headroom in received packetsMichael Brown2015-02-061-1/+11
| | | | | | | | | Some protocols (such as ARP) may modify the received packet and re-use the same I/O buffer for transmission of a reply. To allow this, reserve sufficient headroom at the start of each received packet buffer for our transmit datapath headers. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [ncm] Use large multi-packet buffers by defaultMichael Brown2015-02-062-165/+301
| | | | | | | | | | | | | | | | | | | | | | | | Some devices have a very small number of internal buffers, and rely on being able to pack multiple packets into each buffer. Using 2048-byte buffers on such devices produces throughput of around 100Mbps. Using a small number of much larger buffers (e.g. 32kB) increases the throughput to around 780Mbps. (The full 1Gbps is not reached because the high RTT induced by the use of multi-packet buffers causes us to saturate our 256kB TCP window.) Since allocation of large buffers is very likely to fail, allocate the buffer set only once when the device is opened and recycle buffers immediately after use. Received data is now always copied to per-packet buffers. If allocation of large buffers fails, fall back to allocating a larger number of smaller buffers. This will give reduced performance, but the device will at least still be functional. Share code between the interrupt and bulk IN endpoint handlers, since the buffer handling is now very similar. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [usb] Report xHCI host controller eventsMichael Brown2015-02-052-0/+41
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [ncm] Add support for CDC-NCM USB Ethernet devicesMichael Brown2015-02-034-0/+1158
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [usb] Add support for xHCI host controllersMichael Brown2015-02-032-0/+4075
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [usb] Add basic support for USB hubsMichael Brown2015-02-033-0/+803
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [usb] Add basic support for USB devicesMichael Brown2015-02-031-0/+1648
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [pci] Allow drivers to specify a PCI classMichael Brown2015-02-021-3/+6
| | | | | | | | Allow drivers to specify a supported PCI class code. To save space in the final binary, make this an attribute of the driver rather than an attribute of a PCI device ID list entry. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [hyperv] Assume that VMBus xfer page ranges correspond to RNDIS messagesMichael Brown2014-12-201-6/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The (undocumented) VMBus protocol seems to allow for transfer page-based packets where the data payload is split into an arbitrary set of ranges within the transfer page set. The RNDIS protocol includes a length field within the header of each message, and it is known from observation that multiple RNDIS messages can be concatenated into a single VMBus message. iPXE currently assumes that the transfer page range boundaries are entirely arbitrary, and uses the RNDIS header length to determine the RNDIS message boundaries. Windows Server 2012 R2 generates an RNDIS_INDICATE_STATUS_MSG for an undocumented and unknown status code (0x40020006) with a malformed RNDIS header length: the length does not cover the StatusBuffer portion of the message. This causes iPXE to report a malformed RNDIS message and to discard any further RNDIS messages within the same VMBus message. The Linux Hyper-V driver assumes that the transfer page range boundaries correspond to RNDIS message boundaries, and so does not notice the malformed length field in the RNDIS header. Match the behaviour of the Linux Hyper-V driver: assume that the transfer page range boundaries correspond to the RNDIS message boundaries and ignore the RNDIS header length. This avoids triggering the "malformed packet" error and also avoids unnecessary data copying: since we now have one I/O buffer per RNDIS message, there is no longer any need to use iob_split(). Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [hyperv] Increase TX ring sizeMichael Brown2014-12-201-1/+1
| | | | | | | | Empirical observation suggests that 32 is a sensible size to minimise the number of deferred packet transmissions without overflowing the VMBus transmit ring buffer. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [hyperv] Receive all VMBus messages in a pollMichael Brown2014-12-201-1/+3
| | | | | | | Allow for elision of transmitted TCP ACKs by handling all received VMBus messages in each network device poll operation. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [hyperv] Tear down NetVSC RX buffer GPADL after closing VMBus deviceMichael Brown2014-12-201-24/+20Star
| | | | | | | | | | | | | On Windows Server 2012 R2, the receive buffer teardown completion message seems to occasionally be deferred until after the VMBus channel has been closed. This happens even if there are no packets currently in the receive buffer. Work around this problem by separating the revocation and teardown of the receive buffer, and deferring the teardown until after the VMBus channel has been closed. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [hyperv] Add support for NetVSC paravirtual network devicesMichael Brown2014-12-182-0/+1203
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [vmxnet3] Add profiling code to exclude time spent in the hypervisorMichael Brown2014-12-121-1/+33
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [intel] Use autoloaded MAC address instead of EEPROM MAC addressMichael Brown2014-10-311-4/+4
| | | | | | | | | | | | | | | | | | | The i350 (and possibly other Intel NICs) have a non-trivial correspondence between the PCI function number and the external physical port number. For example, the i350 has a "LAN Function Sel" bit within the EEPROM which can invert the mapping so that function 0 becomes port 3, function 1 becomes port 2, etc. Unfortunately the MAC addresses within the EEPROM are indexed by physical port number rather than PCI function number. The end result is that when anything other than the default mapping is used, iPXE will use the wrong address as the base MAC address. Fix by using the autoloaded MAC address if it is valid, and falling back to reading the MAC address directly from the EEPROM only if no autoloaded address is available. Signed-off-by: Michael Brown <mcb30@ipxe.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2026-02-28 06:29:45 +0100