From 8c082aa46816f5eccf8c580b54f0a18bcc1dfc77 Mon Sep 17 00:00:00 2001 From: Michael Brown Date: Fri, 15 Apr 2005 16:49:46 +0000 Subject: This at least compiles now. Haven't separated out the EMBEDDED code yet. --- src/drivers/net/cs89x0.c | 471 +++++++++++++++++++++++------------------------ 1 file changed, 230 insertions(+), 241 deletions(-) (limited to 'src/drivers/net/cs89x0.c') diff --git a/src/drivers/net/cs89x0.c b/src/drivers/net/cs89x0.c index 5483a091..c2d09fa0 100644 --- a/src/drivers/net/cs89x0.c +++ b/src/drivers/net/cs89x0.c @@ -69,13 +69,10 @@ #include "etherboot.h" #include "nic.h" #include "isa.h" +#include "console.h" #include "cs89x0.h" -#ifndef EMBEDDED static unsigned short eth_nic_base; -#else -static unsigned long eth_nic_base; -#endif static unsigned long eth_mem_start; static unsigned short eth_irqno; static unsigned short eth_cs_type; /* one of: CS8900, CS8920, CS8920M */ @@ -454,266 +451,258 @@ static void cs89x0_irq(struct nic *nic __unused, irq_action_t action __unused) } } +static struct nic_operations cs89x0_operations = { + .connect = dummy_connect, + .poll = cs89x0_poll, + .transmit = cs89x0_transmit, + .irq = cs89x0_irq, + .disable = cs89x0_disable, +}; + /************************************************************************** ETH_PROBE - Look for an adapter ***************************************************************************/ -static int cs89x0_probe(struct dev *dev, unsigned short *probe_addrs __unused) -{ - struct nic *nic = (struct nic *)dev; - static const unsigned int netcard_portlist[] = { -#ifdef CS_SCAN - CS_SCAN, -#else /* use "conservative" default values for autoprobing */ -#ifndef EMBEDDED - 0x300,0x320,0x340,0x200,0x220,0x240, - 0x260,0x280,0x2a0,0x2c0,0x2e0, - /* if that did not work, then be more aggressive */ - 0x301,0x321,0x341,0x201,0x221,0x241, - 0x261,0x281,0x2a1,0x2c1,0x2e1, -#else - 0x01000300, -#endif -#endif - 0}; - - int i, result = -1; - unsigned rev_type = 0, ioaddr, ioidx, isa_cnf, cs_revision; - unsigned short eeprom_buff[CHKSUM_LEN]; - +static int cs89x0_probe_addr ( uint16_t ioaddr ) { + /* if they give us an odd I/O address, then do ONE write to + the address port, to get it back to address zero, where we + expect to find the EISA signature word. */ + if (ioaddr & 1) { + ioaddr &= ~1; + if ((inw(ioaddr + ADD_PORT) & ADD_MASK) != ADD_SIG) + return 0; + outw(PP_ChipID, ioaddr + ADD_PORT); + } + + if (inw(ioaddr + DATA_PORT) != CHIP_EISA_ID_SIG) + return 0; - for (ioidx = 0; (ioaddr=netcard_portlist[ioidx++]) != 0; ) { - /* if they give us an odd I/O address, then do ONE write to - the address port, to get it back to address zero, where we - expect to find the EISA signature word. */ - if (ioaddr & 1) { - ioaddr &= ~1; - if ((inw(ioaddr + ADD_PORT) & ADD_MASK) != ADD_SIG) - continue; - outw(PP_ChipID, ioaddr + ADD_PORT); - } + return 1; +} - if (inw(ioaddr + DATA_PORT) != CHIP_EISA_ID_SIG) - continue; - eth_nic_base = ioaddr; +static int cs89x0_probe ( struct dev *dev, struct isa_device *isa ) { + struct nic *nic = nic_device ( dev ); - /* get the chip type */ - rev_type = readreg(PRODUCT_ID_ADD); - eth_cs_type = rev_type &~ REVISON_BITS; - cs_revision = ((rev_type & REVISON_BITS) >> 8) + 'A'; + int i, result = -1; + unsigned rev_type = 0, isa_cnf, cs_revision; + unsigned short eeprom_buff[CHKSUM_LEN]; - printf("\ncs: cs89%c0%s rev %c, base %#hX", - eth_cs_type==CS8900?'0':'2', - eth_cs_type==CS8920M?"M":"", - cs_revision, - eth_nic_base); + nic->ioaddr = ( isa->ioaddr & ~1 ); + nic->irqno = 0; + + eth_nic_base = nic->ioaddr; + + /* get the chip type */ + rev_type = readreg(PRODUCT_ID_ADD); + eth_cs_type = rev_type &~ REVISON_BITS; + cs_revision = ((rev_type & REVISON_BITS) >> 8) + 'A'; + + printf("\ncs: cs89%c0%s rev %c, base %#hX", + eth_cs_type==CS8900?'0':'2', + eth_cs_type==CS8920M?"M":"", + cs_revision, + eth_nic_base); #ifndef EMBEDDED - /* First check to see if an EEPROM is attached*/ - if ((readreg(PP_SelfST) & EEPROM_PRESENT) == 0) { - printf("\ncs: no EEPROM...\n"); - outw(PP_ChipID, eth_nic_base + ADD_PORT); - continue; } - else if (get_eeprom_data(START_EEPROM_DATA,CHKSUM_LEN, - eeprom_buff) < 0) { - printf("\ncs: EEPROM read failed...\n"); - outw(PP_ChipID, eth_nic_base + ADD_PORT); - continue; } - else if (get_eeprom_chksum(START_EEPROM_DATA,CHKSUM_LEN, - eeprom_buff) < 0) { - printf("\ncs: EEPROM checksum bad...\n"); - outw(PP_ChipID, eth_nic_base + ADD_PORT); - continue; } - - /* get transmission control word but keep the - autonegotiation bits */ - eth_auto_neg_cnf = eeprom_buff[AUTO_NEG_CNF_OFFSET/2]; - /* Store adapter configuration */ - eth_adapter_cnf = eeprom_buff[ADAPTER_CNF_OFFSET/2]; - /* Store ISA configuration */ - isa_cnf = eeprom_buff[ISA_CNF_OFFSET/2]; - - /* store the initial memory base address */ - eth_mem_start = eeprom_buff[PACKET_PAGE_OFFSET/2] << 8; - - printf("%s%s%s, addr ", - (eth_adapter_cnf & A_CNF_10B_T)?", RJ-45":"", - (eth_adapter_cnf & A_CNF_AUI)?", AUI":"", - (eth_adapter_cnf & A_CNF_10B_2)?", BNC":""); - - /* If this is a CS8900 then no pnp soft */ - if (eth_cs_type != CS8900 && - /* Check if the ISA IRQ has been set */ - (i = readreg(PP_CS8920_ISAINT) & 0xff, - (i != 0 && i < CS8920_NO_INTS))) - eth_irqno = i; - else { - i = isa_cnf & INT_NO_MASK; - if (eth_cs_type == CS8900) { - /* the table that follows is dependent - upon how you wired up your cs8900 - in your system. The table is the - same as the cs8900 engineering demo - board. irq_map also depends on the - contents of the table. Also see - write_irq, which is the reverse - mapping of the table below. */ - if (i < 4) i = "\012\013\014\005"[i]; - else printf("\ncs: BUG: isa_config is %d\n", i); } - eth_irqno = i; } - - /* Retrieve and print the ethernet address. */ - for (i=0; inode_addr[i] = ((unsigned char *)eeprom_buff)[i]; - } - printf("%!\n", nic->node_addr); + /* First check to see if an EEPROM is attached*/ + if ((readreg(PP_SelfST) & EEPROM_PRESENT) == 0) { + printf("\ncs: no EEPROM...\n"); + outw(PP_ChipID, eth_nic_base + ADD_PORT); + return 0; + } else if (get_eeprom_data(START_EEPROM_DATA,CHKSUM_LEN, + eeprom_buff) < 0) { + printf("\ncs: EEPROM read failed...\n"); + outw(PP_ChipID, eth_nic_base + ADD_PORT); + return 0; + } else if (get_eeprom_chksum(START_EEPROM_DATA,CHKSUM_LEN, + eeprom_buff) < 0) { + printf("\ncs: EEPROM checksum bad...\n"); + outw(PP_ChipID, eth_nic_base + ADD_PORT); + return 0; + } + + /* get transmission control word but keep the + autonegotiation bits */ + eth_auto_neg_cnf = eeprom_buff[AUTO_NEG_CNF_OFFSET/2]; + /* Store adapter configuration */ + eth_adapter_cnf = eeprom_buff[ADAPTER_CNF_OFFSET/2]; + /* Store ISA configuration */ + isa_cnf = eeprom_buff[ISA_CNF_OFFSET/2]; + + /* store the initial memory base address */ + eth_mem_start = eeprom_buff[PACKET_PAGE_OFFSET/2] << 8; + + printf("%s%s%s, addr ", + (eth_adapter_cnf & A_CNF_10B_T)?", RJ-45":"", + (eth_adapter_cnf & A_CNF_AUI)?", AUI":"", + (eth_adapter_cnf & A_CNF_10B_2)?", BNC":""); + + /* If this is a CS8900 then no pnp soft */ + if (eth_cs_type != CS8900 && + /* Check if the ISA IRQ has been set */ + (i = readreg(PP_CS8920_ISAINT) & 0xff, + (i != 0 && i < CS8920_NO_INTS))) + eth_irqno = i; + else { + i = isa_cnf & INT_NO_MASK; + if (eth_cs_type == CS8900) { + /* the table that follows is dependent + upon how you wired up your cs8900 + in your system. The table is the + same as the cs8900 engineering demo + board. irq_map also depends on the + contents of the table. Also see + write_irq, which is the reverse + mapping of the table below. */ + if (i < 4) i = "\012\013\014\005"[i]; + else printf("\ncs: BUG: isa_config is %d\n", i); } + eth_irqno = i; } + + /* Retrieve and print the ethernet address. */ + for (i=0; inode_addr[i] = ((unsigned char *)eeprom_buff)[i]; + } + printf("%!\n", nic->node_addr); #endif #ifdef EMBEDDED - /* Retrieve and print the ethernet address. */ - { + /* Retrieve and print the ethernet address. */ + { unsigned char MAC_HW_ADDR[6]={MAC_HW_ADDR_DRV}; memcpy(nic->node_addr, MAC_HW_ADDR, 6); - } - printf("\n%!\n", nic->node_addr); - - eth_adapter_cnf = A_CNF_10B_T | A_CNF_MEDIA_10B_T; - eth_auto_neg_cnf = EE_AUTO_NEG_ENABLE | IMM_BIT; + } + printf("\n%!\n", nic->node_addr); + + eth_adapter_cnf = A_CNF_10B_T | A_CNF_MEDIA_10B_T; + eth_auto_neg_cnf = EE_AUTO_NEG_ENABLE | IMM_BIT; #endif #ifndef EMBEDDED - /* Set the LineCTL quintuplet based on adapter - configuration read from EEPROM */ - if ((eth_adapter_cnf & A_CNF_EXTND_10B_2) && - (eth_adapter_cnf & A_CNF_LOW_RX_SQUELCH)) - eth_linectl = LOW_RX_SQUELCH; - else - eth_linectl = 0; - - /* check to make sure that they have the "right" - hardware available */ - switch(eth_adapter_cnf & A_CNF_MEDIA_TYPE) { - case A_CNF_MEDIA_10B_T: result = eth_adapter_cnf & A_CNF_10B_T; - break; - case A_CNF_MEDIA_AUI: result = eth_adapter_cnf & A_CNF_AUI; - break; - case A_CNF_MEDIA_10B_2: result = eth_adapter_cnf & A_CNF_10B_2; - break; - default: result = eth_adapter_cnf & (A_CNF_10B_T | A_CNF_AUI | - A_CNF_10B_2); - } - if (!result) { - printf("cs: EEPROM is configured for unavailable media\n"); - error: - writereg(PP_LineCTL, readreg(PP_LineCTL) & - ~(SERIAL_TX_ON | SERIAL_RX_ON)); - outw(PP_ChipID, eth_nic_base + ADD_PORT); - continue; - } + /* Set the LineCTL quintuplet based on adapter + configuration read from EEPROM */ + if ((eth_adapter_cnf & A_CNF_EXTND_10B_2) && + (eth_adapter_cnf & A_CNF_LOW_RX_SQUELCH)) + eth_linectl = LOW_RX_SQUELCH; + else + eth_linectl = 0; + + /* check to make sure that they have the "right" + hardware available */ + switch(eth_adapter_cnf & A_CNF_MEDIA_TYPE) { + case A_CNF_MEDIA_10B_T: result = eth_adapter_cnf & A_CNF_10B_T; + break; + case A_CNF_MEDIA_AUI: result = eth_adapter_cnf & A_CNF_AUI; + break; + case A_CNF_MEDIA_10B_2: result = eth_adapter_cnf & A_CNF_10B_2; + break; + default: result = eth_adapter_cnf & (A_CNF_10B_T | A_CNF_AUI | + A_CNF_10B_2); + } + if (!result) { + printf("cs: EEPROM is configured for unavailable media\n"); + error: + writereg(PP_LineCTL, readreg(PP_LineCTL) & + ~(SERIAL_TX_ON | SERIAL_RX_ON)); + outw(PP_ChipID, eth_nic_base + ADD_PORT); + return 0; + } #endif - /* Initialize the card for probing of the attached media */ - cs89x0_reset(nic); - - /* set the hardware to the configured choice */ - switch(eth_adapter_cnf & A_CNF_MEDIA_TYPE) { - case A_CNF_MEDIA_10B_T: - result = detect_tp(); - if (!result) { - clrline(); - printf("10Base-T (RJ-45%s", - ") has no cable\n"); } - /* check "ignore missing media" bit */ - if (eth_auto_neg_cnf & IMM_BIT) - /* Yes! I don't care if I see a link pulse */ - result = A_CNF_MEDIA_10B_T; - break; - case A_CNF_MEDIA_AUI: - result = detect_aui(nic); - if (!result) { - clrline(); - printf("10Base-5 (AUI%s", - ") has no cable\n"); } - /* check "ignore missing media" bit */ - if (eth_auto_neg_cnf & IMM_BIT) - /* Yes! I don't care if I see a carrrier */ - result = A_CNF_MEDIA_AUI; - break; - case A_CNF_MEDIA_10B_2: - result = detect_bnc(nic); - if (!result) { - clrline(); - printf("10Base-2 (BNC%s", - ") has no cable\n"); } - /* check "ignore missing media" bit */ - if (eth_auto_neg_cnf & IMM_BIT) - /* Yes! I don't care if I can xmit a packet */ - result = A_CNF_MEDIA_10B_2; - break; - case A_CNF_MEDIA_AUTO: - writereg(PP_LineCTL, eth_linectl | AUTO_AUI_10BASET); - if (eth_adapter_cnf & A_CNF_10B_T) - if ((result = detect_tp()) != 0) - break; - if (eth_adapter_cnf & A_CNF_AUI) - if ((result = detect_aui(nic)) != 0) - break; - if (eth_adapter_cnf & A_CNF_10B_2) - if ((result = detect_bnc(nic)) != 0) - break; - clrline(); printf("no media detected\n"); - goto error; - } - clrline(); - switch(result) { - case 0: printf("no network cable attached to configured media\n"); - goto error; - case A_CNF_MEDIA_10B_T: printf("using 10Base-T (RJ-45)\n"); - break; - case A_CNF_MEDIA_AUI: printf("using 10Base-5 (AUI)\n"); - break; - case A_CNF_MEDIA_10B_2: printf("using 10Base-2 (BNC)\n"); - break; - } - - /* Turn on both receive and transmit operations */ - writereg(PP_LineCTL, readreg(PP_LineCTL) | SERIAL_RX_ON | - SERIAL_TX_ON); - + /* Initialize the card for probing of the attached media */ + cs89x0_reset(nic); + + /* set the hardware to the configured choice */ + switch(eth_adapter_cnf & A_CNF_MEDIA_TYPE) { + case A_CNF_MEDIA_10B_T: + result = detect_tp(); + if (!result) { + clrline(); + printf("10Base-T (RJ-45%s", + ") has no cable\n"); } + /* check "ignore missing media" bit */ + if (eth_auto_neg_cnf & IMM_BIT) + /* Yes! I don't care if I see a link pulse */ + result = A_CNF_MEDIA_10B_T; + break; + case A_CNF_MEDIA_AUI: + result = detect_aui(nic); + if (!result) { + clrline(); + printf("10Base-5 (AUI%s", + ") has no cable\n"); } + /* check "ignore missing media" bit */ + if (eth_auto_neg_cnf & IMM_BIT) + /* Yes! I don't care if I see a carrrier */ + result = A_CNF_MEDIA_AUI; + break; + case A_CNF_MEDIA_10B_2: + result = detect_bnc(nic); + if (!result) { + clrline(); + printf("10Base-2 (BNC%s", + ") has no cable\n"); } + /* check "ignore missing media" bit */ + if (eth_auto_neg_cnf & IMM_BIT) + /* Yes! I don't care if I can xmit a packet */ + result = A_CNF_MEDIA_10B_2; + break; + case A_CNF_MEDIA_AUTO: + writereg(PP_LineCTL, eth_linectl | AUTO_AUI_10BASET); + if (eth_adapter_cnf & A_CNF_10B_T) + if ((result = detect_tp()) != 0) + break; + if (eth_adapter_cnf & A_CNF_AUI) + if ((result = detect_aui(nic)) != 0) + break; + if (eth_adapter_cnf & A_CNF_10B_2) + if ((result = detect_bnc(nic)) != 0) + break; + clrline(); printf("no media detected\n"); + goto error; + } + clrline(); + switch(result) { + case 0: printf("no network cable attached to configured media\n"); + goto error; + case A_CNF_MEDIA_10B_T: printf("using 10Base-T (RJ-45)\n"); + break; + case A_CNF_MEDIA_AUI: printf("using 10Base-5 (AUI)\n"); break; + case A_CNF_MEDIA_10B_2: printf("using 10Base-2 (BNC)\n"); + break; + } + + /* Turn on both receive and transmit operations */ + writereg(PP_LineCTL, readreg(PP_LineCTL) | SERIAL_RX_ON | + SERIAL_TX_ON); + + return 0; #ifdef EMBEDDED - error: - writereg(PP_LineCTL, readreg(PP_LineCTL) & - ~(SERIAL_TX_ON | SERIAL_RX_ON)); - outw(PP_ChipID, eth_nic_base + ADD_PORT); - continue; + error: + writereg(PP_LineCTL, readreg(PP_LineCTL) & + ~(SERIAL_TX_ON | SERIAL_RX_ON)); + outw(PP_ChipID, eth_nic_base + ADD_PORT); + return 0; #endif - } - - if (ioaddr == 0) - return (0); - - nic->irqno = 0; - nic->ioaddr = ioaddr; -static struct nic_operations cs89x0_operations; -static struct nic_operations cs89x0_operations = { - .connect = dummy_connect, - .poll = cs89x0_poll, - .transmit = cs89x0_transmit, - .irq = cs89x0_irq, - .disable = cs89x0_disable, -}; - nic->nic_op = &cs89x0_operations; - /* Based on PnP ISA map */ - dev->devid.vendor_id = htons(ISAPNP_VENDOR('C','S','C')); - dev->devid.device_id = htons(0x0007); + nic->nic_op = &cs89x0_operations; return 1; } - -static struct isa_driver cs89x0_driver __isa_driver = { - .type = NIC_DRIVER, - .name = "CS89x0", - .probe = cs89x0_probe, - .ioaddrs = 0, + +static struct isa_probe_addr cs89x0_probe_addrs[] = { +#ifndef EMBEDDED + /* use "conservative" default values for autoprobing */ + { 0x300 }, { 0x320 }, { 0x340 }, { 0x200 }, { 0x220 }, { 0x240 }, + { 0x260 }, { 0x280 }, { 0x2a0 }, { 0x2c0 }, { 0x2e0 }, + /* if that did not work, then be more aggressive */ + { 0x301 }, { 0x321 }, { 0x341 }, { 0x201 }, { 0x221 }, { 0x241 }, + { 0x261 }, { 0x281 }, { 0x2a1 }, { 0x2c1 }, { 0x2e1 }, +#else + 0x01000300, +#endif }; -ISA_ROM("cs89x0","Crystal Semiconductor CS89x0"); + +static struct isa_driver cs89x0_driver = + ISA_DRIVER ( "CS89x0", cs89x0_probe_addrs, cs89x0_probe_addr, + ISAPNP_VENDOR('C','S','C'), 0x0007 ); + +ISA_ROM ( "cs89x0", "Crystal Semiconductor CS89x0" ); /* * Local variables: -- cgit v1.2.3-55-g7522