/**************************************************************************
*
*    isapnp.c -- Etherboot isapnp support for the 3Com 3c515
*    Written 2002-2003 by Timothy Legge <tlegge@rogers.com>
*
*    This program is free software; you can redistribute it and/or modify
*    it under the terms of the GNU General Public License as published by
*    the Free Software Foundation; either version 2 of the License, or
*    (at your option) any later version.
*
*    This program is distributed in the hope that it will be useful,
*    but WITHOUT ANY WARRANTY; without even the implied warranty of
*    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
*    GNU General Public License for more details.
*
*    You should have received a copy of the GNU General Public License
*    along with this program; if not, write to the Free Software
*    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*    Portions of this code:
*	Copyright (C) 2001  P.J.H.Fox (fox@roestock.demon.co.uk)
*
*
*    REVISION HISTORY:
*    ================
*    Version 0.1 April 26, 2002 TJL
*    Version 0.2 01/08/2003	TJL Moved outside the 3c515.c driver file
*    Version 0.3 Sept 23, 2003	timlegge Change delay to currticks
*		
*
*    Generalised into an ISAPnP bus that can be used by more than just
*    the 3c515 by Michael Brown <mbrown@fensystems.co.uk>
*
***************************************************************************/

#include "etherboot.h"
#include "timer.h"
#include "isapnp.h"

/*
 * We can have only one ISAPnP bus in a system.  Once the read port is
 * known and all cards have been allocated CSNs, there's nothing to be
 * gained by re-scanning for cards.
 *
 * However, we shouldn't make scanning the ISAPnP bus an INIT_FN(),
 * because even ISAPnP probing can still screw up other devices on the
 * ISA bus.  We therefore probe only when we are first asked to find
 * an ISAPnP device.
 *
 */
static uint16_t isapnp_read_port;
static uint16_t isapnp_max_csn;

static const char initdata[] = INITDATA;

/*
 * ISAPnP utility functions
 *
 */

static inline void isapnp_write_address ( uint8_t address ) {
	outb ( address, ISAPNP_ADDRESS );
}

static inline void isapnp_write_data ( uint8_t data ) {
	outb ( data, ISAPNP_WRITE_DATA );
}

static inline void isapnp_write_byte ( uint8_t address, uint8_t value ) {
	isapnp_write_address ( address );
	isapnp_write_data ( value );
}

static inline uint8_t isapnp_read_data ( void ) {
	return inb ( isapnp_read_port );
}

static inline void isapnp_set_read_port ( void ) {
	isapnp_write_byte ( ISAPNP_READPORT, isapnp_read_port >> 2 );
}

static inline void isapnp_serialisolation ( void ) {
	isapnp_write_address ( ISAPNP_SERIALISOLATION );
}

static inline void isapnp_wait_for_key ( void ) {
	isapnp_write_byte ( ISAPNP_CONFIGCONTROL, ISAPNP_CONFIG_WAIT_FOR_KEY );
}

static inline void isapnp_reset_csn ( void ) {
	isapnp_write_byte ( ISAPNP_CONFIGCONTROL, ISAPNP_CONFIG_RESET_CSN );
}

static inline void isapnp_wake ( uint8_t csn ) {
	isapnp_write_byte ( ISAPNP_WAKE, csn );
}

static inline void isapnp_write_csn ( uint8_t csn ) {
	isapnp_write_byte ( ISAPNP_CARDSELECTNUMBER, csn );
}

/*
 * The linear feedback shift register as described in Appendix B of
 * the PnP ISA spec.  The hardware implementation uses eight D-type
 * latches and two XOR gates.  I think this is probably the smallest
 * possible implementation in software.  :)
 *
 */
static inline uint8_t isapnp_lfsr_next ( uint8_t lfsr, int input_bit ) {
	register uint8_t lfsr_next;

	lfsr_next = lfsr >> 1;
	lfsr_next |= ( ( ( lfsr ^ lfsr_next ) ^ input_bit ) ) << 7;
	return lfsr_next;
}

/*
 * Send the ISAPnP initiation key
 *
 */
static void isapnp_send_key ( void ) {
	unsigned int i;
	uint8_t lfsr;

	udelay ( 1000 );
	isapnp_write_address ( 0x00 );
	isapnp_write_address ( 0x00 );

	lfsr = ISAPNP_LFSR_SEED;
	for ( i = 0 ; i < 32 ; i-- ) {
		isapnp_write_address ( lfsr );
		lfsr = isapnp_lfsr_next ( lfsr, 0 );
	}
}

/*
 *  Compute ISAPnP identifier checksum
 *
 */
static uint8_t isapnp_checksum ( union isapnp_identifier *identifier ) {
	int i, j;
	uint8_t lfsr;
	uint8_t byte;

	lfsr = ISAPNP_LFSR_SEED;
	for ( i = 0 ; i < 8 ; i++ ) {
		byte = identifier->bytes[i];
		for ( j = 0 ; j < 8 ; j++ ) {
			lfsr = isapnp_lfsr_next ( lfsr, byte );
			byte >>= 1;
		}
	}
	return lfsr;
}

/*
 * Try isolating ISAPnP cards at the current read port.  Return the
 * number of ISAPnP cards found.
 *
 * The state diagram on page 18 (PDF page 24) of the PnP ISA spec
 * gives the best overview of what happens here.
 *
 */
static int isapnp_try_isolate ( void ) {
	union isapnp_identifier identifier;
	int i, j, seen55aa;
	uint16_t data;
	uint8_t byte;

	DBG ( "ISAPnP attempting isolation at read port %hx\n",
	      isapnp_read_port );

	/* Place all cards into the Sleep state, whatever state
	 * they're currently in.
	 */
	isapnp_wait_for_key ();
	isapnp_send_key ();

	/* Reset all assigned CSNs */
	isapnp_reset_csn ();
	isapnp_max_csn = 0;
	udelay ( 2000 );
	
	/* Place all cards into the Isolation state */
	isapnp_wait_for_key ();
	isapnp_send_key ();
	isapnp_wake ( 0x00 );
	
	/* Set the read port */
	isapnp_set_read_port ();
	udelay ( 1000 );

	while ( 1 ) {

		/* All cards that do not have assigned CSNs are
		 * currently in the Isolation state, each time we go
		 * through this loop.
		 */

		/* Initiate serial isolation */
		isapnp_serialisolation ();
		udelay ( 1000 );

		/* Read identifier serially via the ISAPnP read port. */
		memset ( &identifier, 0, sizeof ( identifier ) );
		seen55aa = 0;
		for ( i = 0 ; i < 9 ; i++ ) {
			byte = 0;
			for ( j = 0 ; j < 8 ; j++ ) {
				data = isapnp_read_data ();
				udelay ( 1000 );
				data = ( data << 8 ) | isapnp_read_data ();
				udelay ( 1000 );
				if ( data == 0x55aa ) {
					byte |= 1;
				}
				byte <<= 1;
			}
			identifier.bytes[i] = byte;
			if ( byte ) {
				seen55aa = 1;
			}
		}
				
		/* If we didn't see a valid ISAPnP device, stop here */
		if ( ( ! seen55aa ) ||
		     ( identifier.checksum != isapnp_checksum (&identifier) ) )
			break;

		/* Give the device a CSN */
		isapnp_max_csn++;
		DBG ( "ISAPnP isolation found device "
		      "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx:%hhx:%hhx "
		      "(checksum %hhx), assigning CSN %hhx\n",
		      identifier.bytes[0], identifier.bytes[1],
		      identifier.bytes[2], identifier.bytes[3],
		      identifier.bytes[4], identifier.bytes[5],
		      identifier.bytes[6], identifier.bytes[7],
		      identifier.checksum, isapnp_max_csn );
		
		isapnp_write_csn ( isapnp_max_csn );
		udelay ( 1000 );

		/* Send this card back to Sleep and force all cards
		 * without a CSN into Isolation state
		 */
		isapnp_wake ( 0x00 );
		udelay ( 1000 );
	}

	/* Place all cards in Wait for Key state */
	isapnp_wait_for_key ();

	/* Return number of cards found */
	DBG ( "ISAPnP found %d devices at read port %hx\n", isapnp_read_port );
	return isapnp_max_csn;
}

/*
 * Isolate all ISAPnP cards, locating a valid read port in the process.
 *
 */
static void isapnp_isolate ( void ) {
	for ( isapnp_read_port = ISAPNP_READ_PORT_MIN ;
	      isapnp_read_port <= ISAPNP_READ_PORT_MAX ;
	      isapnp_read_port += ISAPNP_READ_PORT_STEP ) {
		/* Avoid problematic locations such as the NE2000
		 * probe space
		 */
		if ( ( isapnp_read_port >= 0x280 ) &&
		     ( isapnp_read_port <= 0x380 ) )
			continue;
		
		/* If we detect any ISAPnP cards at this location, stop */
		if ( isapnp_try_isolate () )
			return;
	}
}






/*
 *  Build device list for all present ISA PnP devices.
 */
static int isapnp_build_device_list(void)
{
	int csn, device, vendor, serial;
	unsigned char header[9], checksum;
	for (csn = 1; csn <= 10; csn++) {
		Wake(csn);
		isapnp_peek(header, 9);
		checksum = isapnp_checksum(header);
#ifdef EDEBUG
		printf
		    ("vendor: 0x%hX:0x%hX:0x%hX:0x%hX:0x%hX:0x%hX:0x%hX:0x%hX:0x%hX\n",
		     header[0], header[1], header[2], header[3], header[4],
		     header[5], header[6], header[7], header[8]);
		printf("checksum = 0xhX\n", checksum);
#endif
		/* Don't be strict on the checksum, here !
		   e.g. 'SCM SwapBox Plug and Play' has header[8]==0 (should be: b7) */
		if (header[8] == 0);
		else if (checksum == 0x00 || checksum != header[8])	/* not valid CSN */
			continue;

		vendor = (header[1] << 8) | header[0];
		device = (header[3] << 8) | header[2];
		serial =
		    (header[7] << 24) | (header[6] << 16) | (header[5] <<
							     8) |
		    header[4];
		if (vendor == 0x6D50)
			if (device == 0x5150) {
				printf
				    ("\nFound 3Com 3c515 PNP Card!\n Vendor ID: 0x%hX, Device ID: 0x%hX, Serial Num: 0x%hX\n",
				     vendor, device, serial);
				pnp_card_csn = csn;
			}
		isapnp_checksum_value = 0x00;
	}
	return 0;
}

int Config(int csn)
{
#define TIMEOUT_PNP     100
	unsigned char id[IDENT_LEN];
	int i, x;
	Wake(csn);
	udelay(1000);
	for (i = 0; i < IDENT_LEN; i++) {
		for (x = 1; x < TIMEOUT_PNP; x++) {
			if (STATUS & 1)
				break;
			udelay(1000);
		}
		id[i] = RESOURCEDATA;
#ifdef EDEBUG
		printf(" 0x%hX ", id[i]);
#endif
	}
#ifdef EDEBUG
	printf("Got The status bit\n");
#endif
	/*Set Logical Device Register active */
	LOGICALDEVICENUMBER;
	/* Specify the first logical device */
	WRITE_DATA(0);


	/* Apparently just activating the card is enough
	   for Etherboot to detect it.  Why bother with the
	   following code.  Left in place in case it is
	   later required  */
/*==========================================*/
	/* set DMA */
/*    ADDRESS(0x74 + 0);
    WRITE_DATA(7); */

	/*Set IRQ */
/*    udelay(1000);
    ADDRESS(0x70 + (0 << 1));
    WRITE_DATA(9);
    udelay(1000); */
/*=============================================*/
	/*Activate */
	ACTIVATE;
	WRITE_DATA(1);
	udelay(250);
	/* Ask for access to the Wait for Key command - ConfigControl register */
	CONFIGCONTROL;
	/* Write the Wait for Key Command to the ConfigControl Register */
	WRITE_DATA(CONFIG_WAIT_FOR_KEY);
	/* As per doc. Two Write cycles of 0x00 required befor the Initialization key is sent */
	ADDRESS(0);
	ADDRESS(0);

	return 1;
}


static void isapnp_peek(unsigned char *data, int bytes)
{
	int i, j;
	unsigned char d = 0;

	for (i = 1; i <= bytes; i++) {
		for (j = 0; j < 20; j++) {
			d = STATUS;
			if (d & 1)
				break;
			udelay(100);
		}
		if (!(d & 1)) {
			if (data != NULL)
				*data++ = 0xff;
			continue;
		}
		d = RESOURCEDATA;	/* PRESDI */
		isapnp_checksum_value += d;
		if (data != NULL)
			*data++ = d;
	}
}




/*
 * Ensure that there is sufficient space in the shared dev_bus
 * structure for a struct isapnp_device.
 *
 */
DEV_BUS( struct isapnp_device, isapnp_dev );
static char isapnp_magic[0]; /* guaranteed unique symbol */

/*
 * Fill in parameters for an ISAPnP device based on CSN
 *
 * Return 1 if device present, 0 otherwise
 *
 */
static int fill_isapnp_device ( struct isapnp_device *isapnp ) {

	/*
	 * Ensure that all ISAPnP cards have CSNs allocated to them,
	 * if we haven't already done so.
	 *
	 */
	if ( ! isapnp_read_port ) {
		isapnp_isolate();
	}

	/* wake csn, read config, send card to sleep */

	DBG ( "ISAPnP found CSN %hhx ID %hx:%hx (\"%s\")\n",
	      isapnp->csn, isapnp->vendor_id, isapnp->prod_id,
	      isa_id_string ( isapnp->vendor_id, isapnp->prod_id ) );

	return 0;
}

/*
 * Find an ISAPnP device matching the specified driver
 *
 */
int find_isapnp_device ( struct isapnp_device *isapnp,
			 struct isapnp_driver *driver ) {
	unsigned int i;

	/* Initialise struct isapnp if it's the first time it's been used. */
	if ( isapnp->magic != isapnp_magic ) {
		memset ( isapnp, 0, sizeof ( *isapnp ) );
		isapnp->magic = isapnp_magic;
		isapnp->csn = 1;
	}

	/* Iterate through all possible ISAPNP CSNs, starting where we
	 * left off.
	 */
	for ( ; isapnp->csn <= isapnp_max_csn ; isapnp->csn++ ) {
		/* If we've already used this device, skip it */
		if ( isapnp->already_tried ) {
			isapnp->already_tried = 0;
			continue;
		}

		/* Fill in device parameters */
		if ( ! fill_isapnp_device ( isapnp ) ) {
			continue;
		}

		/* Compare against driver's ID list */
		for ( i = 0 ; i < driver->id_count ; i++ ) {
			struct isapnp_id *id = &driver->ids[i];
			
			if ( ( isapnp->vendor_id == id->vendor_id ) &&
			     ( ISA_PROD_ID ( isapnp->prod_id ) ==
			       ISA_PROD_ID ( id->prod_id ) ) ) {
				DBG ( "Device %s (driver %s) matches ID %s\n",
				      id->name, driver->name,
				      isa_id_string ( isapnp->vendor_id,
						      isapnp->prod_id ) );
				isapnp->name = id->name;
				isapnp->already_tried = 1;
				return 1;
			}
		}
	}

	/* No device found */
	isapnp->csn = 1;
	return 0;
}

/*
 * Find the next ISAPNP device that can be used to boot using the
 * specified driver.
 *
 */
int find_isapnp_boot_device ( struct dev *dev, struct isapnp_driver *driver ) {
	struct isapnp_device *isapnp = ( struct isapnp_device * ) dev->bus;

	if ( ! find_isapnp_device ( isapnp, driver ) )
		return 0;

	dev->name = isapnp->name;
	dev->devid.bus_type = ISA_BUS_TYPE;
	dev->devid.vendor_id = isapnp->vendor_id;
	dev->devid.device_id = isapnp->prod_id;

	return 1;
}