new setup_core script, builds the stage3.1 rootfs on the remote system, instead of the server

2 files changed, 218 insertions, 0 deletions

diff --git a/remote/core/core.conf b/remote/core/core.conf
new file mode 100644
index 00000000..40f6aedb
--- /dev/null
+++ b/remote/core/core.conf
@@ -0,0 +1,65 @@
+REQUIRED_MODULES="	kernel/drivers/video/sis/sisfb.ko
+			kernel/drivers/video/via/viafb.ko
+			kernel/drivers/acpi/video.ko
+			kernel/drivers/ssb/ssb.ko
+			kernel/drivers/gpu/drm/ttm/ttm.ko
+			kernel/drivers/gpu/drm/via/via.ko
+			kernel/drivers/gpu/drm/drm.ko
+			kernel/drivers/gpu/drm/tdfx/tdfx.ko
+			kernel/drivers/gpu/drm/nouveau/nouveau.ko
+			kernel/drivers/gpu/drm/savage/savage.ko
+			kernel/drivers/gpu/drm/radeon/radeon.ko
+			kernel/drivers/gpu/drm/drm_kms_helper.ko
+			kernel/drivers/gpu/drm/i810/i810.ko
+			kernel/drivers/gpu/drm/i2c/ch7006.ko
+			kernel/drivers/gpu/drm/i2c/sil164.ko
+			kernel/drivers/gpu/drm/sis/sis.ko
+			kernel/drivers/gpu/drm/mga/mga.ko
+			kernel/drivers/gpu/drm/i915/i915.ko
+			kernel/drivers/gpu/drm/r128/r128.ko
+			kernel/drivers/i2c/algos/i2c-algo-bit.ko
+			kernel/drivers/net/netconsole.ko
+			kernel/drivers/net/ethernet/realtek/8139too.ko
+			kernel/drivers/net/ethernet/realtek/r8169.ko
+			kernel/drivers/net/ethernet/nvidia/forcedeth.ko
+			kernel/drivers/net/ethernet/via/via-rhine.ko
+			kernel/drivers/net/ethernet/amd/pcnet32.ko
+			kernel/drivers/net/ethernet/atheros/atl1e/atl1e.ko
+			kernel/drivers/net/ethernet/atheros/atl1c/atl1c.ko
+			kernel/drivers/net/ethernet/sis/sis900.ko
+			kernel/drivers/net/ethernet/broadcom/tg3.ko
+			kernel/drivers/net/ethernet/broadcom/b44.ko
+			kernel/drivers/net/ethernet/intel/e1000/e1000.ko
+			kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
+			kernel/drivers/net/ethernet/intel/e100.ko
+			kernel/drivers/net/ethernet/marvell/skge.ko
+			kernel/drivers/net/ethernet/3com/3c59x.ko
+			kernel/drivers/net/ethernet/dec/tulip/tulip.ko
+			kernel/drivers/hid/hid.ko
+			kernel/drivers/hid/usbhid/usbhid.ko
+			kernel/drivers/platform/x86/wmi.ko
+			kernel/drivers/platform/x86/mxm-wmi.ko
+			kernel/fs/configfs/configfs.ko
+			kernel/fs/nfs_common/nfs_acl.ko
+			kernel/fs/nfs/nfs.ko
+			kernel/fs/fscache/fscache.ko
+			kernel/fs/lockd/lockd.ko
+			kernel/fs/squashfs/squashfs.ko
+			kernel/net/sunrpc/sunrpc.ko
+			kernel/net/sunrpc/auth_gss/auth_rpcgss.ko
+			kernel/net/802/stp.ko
+			kernel/net/bridge/bridge.ko
+			kernel/ubuntu/aufs/aufs.ko"
+REQUIRED_FIRMWARE="	3com/
+			e100/
+			matrox/
+			r128/
+			radeon/
+			RTL8192E/
+			RTL8192SE/
+			rtl_nic/
+			tigon/"
+REQUIRED_FILES="	/etc/netconfig
+			/etc/networks
+			/etc/protocols
+			/etc/services"
diff --git a/remote/core/data/init b/remote/core/data/init
new file mode 100755
index 00000000..510a17e3
--- /dev/null
+++ b/remote/core/data/init
@@ -0,0 +1,153 @@
+#!/bin/sh
+# Copyright (c) 2012 - OpenSLX GmbH
+#
+# This program is free software distributed under the GPL version 2.
+# See http://openslx.org/COPYING
+#
+# If you have any feedback please consult http://openslx.org/feedback and
+# send your feedback to feedback@openslx.org
+#
+# General information about OpenSLX can be found at http://openslx.org
+#
+# First script for initial ramfs for OpenSLX linux stateless clients
+#############################################################################
+
+export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/openslx/bin:/openslx/sbin
+export LD_LIBRARY_PATH=/usr/lib64
+
+mount -n -t tmpfs -o 'mode=755' run "/run"
+
+# mount the important standard directories
+[ ! -f /proc/cpuinfo ] && mount -n -t proc proc /proc
+[ ! -d /sys/class ] && mount -n -t sysfs sysfs /sys
+
+echo "/sbin/mdev" > /proc/sys/kernel/hotplug
+# read graphic and network adaptor configuration (without proprietary drivers yet)
+
+( hwinfo --gfxcard > /etc/hwinfo ) &
+( hwinfo --netcard > /etc/netcard ) &
+
+# read kernel command line for debugging switch
+read KCL < /proc/cmdline
+export KCL
+for opts in ${KCL}; do
+	case ${opts} in
+		debug=*)
+			DEBUG=1;;
+		ip=*)
+			# process IP info
+			ipinfo=${opts#ip=};;
+		nfs=*)
+      			nfs=${opts#nfs=}
+      			nfspath=${nfs#*:}
+      			nfsserver=${nfs%:/*}
+    		;;
+	esac
+done
+
+while ps | grep -v grep | grep -q "  hwinfo --gfxcard" ; do usleep 10 ; done
+
+case $(cat /etc/hwinfo) in
+	*i915*)
+	 	modprobe -a i915 2>/dev/null
+		;;
+       *intel*|*Intel*)
+	        modprobe -a i810 i830 i915 2>/dev/null
+        	;;
+       *nvidia*|*NVidia*|*nouveau*)
+	        modprobe -q nouveau 2>/dev/null
+        	;;
+       *radeon*|*Radeon*)
+	         modprobe -q radeon 2>/dev/null
+        	;;
+       *mga*|*matrox*|*Matrox*)
+	        modprobe -q mga 2>/dev/null
+	        ;;
+       *VMWARE*)
+                ;;
+       *)
+	        modprobe -qa r128 savage sis tdfx ttm via viafb
+        	;;
+esac
+( modprobe -a drm fbcon; mdev -s ) &
+
+# load required network and usb controller drivers, filter out wireless adaptors
+while ps | grep -v grep | grep -q "  hwinfo --netcard" ; do usleep 10 ; done
+nwcardlist="forcedeth|e1000e|e1000|e100|tg3|via-rhine|r8169|pcnet32"
+echo "modprobe -qa usbhid hid-bright" >/etc/modprobe.base
+grep modprobe /etc/netcard | grep -E "$nwcardlist" \
+  | sed 's/.* Cmd: "//;s/"//;s/modprobe/modprobe -qb/' \
+  | sort -u >>/etc/modprobe.base
+# virtio hack
+if [ $(grep -ic "virtio_pci" /etc/modprobe.base) -ge 1 ]; then
+  echo "modprobe -q virtio_net" >>/etc/modprobe.base
+fi
+/bin/sh /etc/modprobe.base; mdev -s
+
+# setup network
+nwif="eth0"
+# set up loopback networking
+[ $DEBUGLEVEL -eq 20 ] && echo "** starting ip config at $(sysup)"
+ip link set dev lo up 2>/dev/null
+ip addr add 127.0.0.1/8 dev lo 2>/dev/null
+ip link set dev $nwif up  2>/dev/null || { echo "No link for $nwif, dropping to shell.."; setsid sh -c 'exec sh </dev/tty1 >/dev/tty1 2>&1'; }
+
+# analyze ip information from the kernel command line and put parts
+# of it into several variables
+if [ -n "$ipinfo" ] ; then
+  getip () {
+    local val="$ipinfo:"; i=$(($1 - 1));
+    while [ $i -gt 0 ] ; do
+      val=${val#*:} ; i=$(($i - 1));
+    done;
+  echo $val|sed "s/:.*//"; }
+  clientip=$(getip 1)
+  serverip=$(getip 2)
+  gateway=$(getip 3)
+  subnet_mask=$(getip 4)
+  broadcast_address=$(ipcalc -s -b $clientip $subnet_mask|sed s/.*=//)
+  [ -z "$broadcast_address" ] && broadcast_address=255.255.255.255
+  # we might have an idea of the dns server via preboot
+  dns_srv=$(getip 5)
+  [ -n "$dns_srv" ] && echo nameserver $dns_srv >/etc/resolv.conf;
+  echo -e "# ip configuration written by $0 script:\nclientip=$clientip\n\
+subnet_mask=$subnet_mask\ngateway=$gateway\nserverip=$serverip\n\
+broadcast_address=$broadcast_address" >>/etc/initramfs-setup
+  # set static ip address
+  ip addr add $clientip/$(ipcalc -s -p $clientip $subnet_mask|sed s/.*=//) \
+    broadcast $broadcast_address dev $nwif 2>/dev/null
+  ip route add default via $gateway 2>/dev/null
+else
+  noipyet="yes"
+fi
+
+
+# load local file systems
+modprobe aufs
+modprobe squashfs
+
+mkdir -p /dev/shm/union /dev/shm/uniontmp /rorootfs
+mount -n -t tmpfs none /dev/shm/uniontmp
+
+if [ -n "$nfs" ] ; then
+	mount -t nfs -o ro,async,nolock ${nfsserver}:${nfspath} /rorootfs ||  { echo "Problem mounting NFS-Directory from ${nfsserver}:${nfspath}. Dropping to DEBUG shell."; DEBUG=1; } 	
+else
+	mount -n /mnt/openslx.sqfs /rorootfs || { echo "Problem mounting Squashfs. Dropping to DEBUG shell."; DEBUG=1; }
+fi
+			
+mount -n -t aufs -o br:/dev/shm/uniontmp:/rorootfs=ro none /mnt
+mkdir -p /mnt/uniontmp /mnt/tmp
+mount -n --move /dev/shm/uniontmp /mnt/uniontmp
+
+if [ $DEBUG -ge 1 ]; then
+	echo "Starting debug shell, CTRL + D will start Stage 3.2."
+	setsid sh -c 'exec sh </dev/tty1 >/dev/tty1 2>&1'
+fi
+
+for mnt in proc sys run ; do
+  umount -n $mnt
+done
+
+unset BOOT_IMAGE initrd
+# new style of pivoting (switch_root or run-init)
+exec /sbin/switch_root -c /dev/console /mnt /usr/lib/systemd/systemd