From 1d7eb8c79b17fc9b2f9e93c215d574c8a6563441 Mon Sep 17 00:00:00 2001 From: Jonathan Bauer Date: Fri, 15 Apr 2011 19:27:42 +0200 Subject: fix :) --- contrib/syslinux/latest/gpxe/src/include/i82365.h | 450 ++++++++++++++++++++++ 1 file changed, 450 insertions(+) create mode 100644 contrib/syslinux/latest/gpxe/src/include/i82365.h (limited to 'contrib/syslinux/latest/gpxe/src/include/i82365.h') diff --git a/contrib/syslinux/latest/gpxe/src/include/i82365.h b/contrib/syslinux/latest/gpxe/src/include/i82365.h new file mode 100644 index 0000000..3b0e00c --- /dev/null +++ b/contrib/syslinux/latest/gpxe/src/include/i82365.h @@ -0,0 +1,450 @@ +/* + * i82365.h 1.15 1999/10/25 20:03:34 + * + * The contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"). + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * The initial developer of the original code is David A. Hinds + * . Portions created by David A. Hinds + * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. + */ + +#ifndef _LINUX_I82365_H +#define _LINUX_I82365_H + +/* register definitions for the Intel 82365SL PCMCIA controller */ + +/* Offsets for PCIC registers */ +#define I365_IDENT 0x00 /* Identification and revision */ +#define I365_STATUS 0x01 /* Interface status */ +#define I365_POWER 0x02 /* Power and RESETDRV control */ +#define I365_INTCTL 0x03 /* Interrupt and general control */ +#define I365_CSC 0x04 /* Card status change */ +#define I365_CSCINT 0x05 /* Card status change interrupt control */ +#define I365_ADDRWIN 0x06 /* Address window enable */ +#define I365_IOCTL 0x07 /* I/O control */ +#define I365_GENCTL 0x16 /* Card detect and general control */ +#define I365_GBLCTL 0x1E /* Global control register */ + +/* Offsets for I/O and memory window registers */ +#define I365_IO(map) (0x08+((map)<<2)) +#define I365_MEM(map) (0x10+((map)<<3)) +#define I365_W_START 0 +#define I365_W_STOP 2 +#define I365_W_OFF 4 + +/* Flags for I365_STATUS */ +#define I365_CS_BVD1 0x01 +#define I365_CS_STSCHG 0x01 +#define I365_CS_BVD2 0x02 +#define I365_CS_SPKR 0x02 +#define I365_CS_DETECT 0x0C +#define I365_CS_WRPROT 0x10 +#define I365_CS_READY 0x20 /* Inverted */ +#define I365_CS_POWERON 0x40 +#define I365_CS_GPI 0x80 + +/* Flags for I365_POWER */ +#define I365_PWR_OFF 0x00 /* Turn off the socket */ +#define I365_PWR_OUT 0x80 /* Output enable */ +#define I365_PWR_NORESET 0x40 /* Disable RESETDRV on resume */ +#define I365_PWR_AUTO 0x20 /* Auto pwr switch enable */ +#define I365_VCC_MASK 0x18 /* Mask for turning off Vcc */ +/* There are different layouts for B-step and DF-step chips: the B + step has independent Vpp1/Vpp2 control, and the DF step has only + Vpp1 control, plus 3V control */ +#define I365_VCC_5V 0x10 /* Vcc = 5.0v */ +#define I365_VCC_3V 0x18 /* Vcc = 3.3v */ +#define I365_VPP2_MASK 0x0c /* Mask for turning off Vpp2 */ +#define I365_VPP2_5V 0x04 /* Vpp2 = 5.0v */ +#define I365_VPP2_12V 0x08 /* Vpp2 = 12.0v */ +#define I365_VPP1_MASK 0x03 /* Mask for turning off Vpp1 */ +#define I365_VPP1_5V 0x01 /* Vpp2 = 5.0v */ +#define I365_VPP1_12V 0x02 /* Vpp2 = 12.0v */ + +/* Flags for I365_INTCTL */ +#define I365_RING_ENA 0x80 +#define I365_PC_RESET 0x40 +#define I365_PC_IOCARD 0x20 +#define I365_INTR_ENA 0x10 +#define I365_IRQ_MASK 0x0F + +/* Flags for I365_CSC and I365_CSCINT*/ +#define I365_CSC_BVD1 0x01 +#define I365_CSC_STSCHG 0x01 +#define I365_CSC_BVD2 0x02 +#define I365_CSC_READY 0x04 +#define I365_CSC_DETECT 0x08 +#define I365_CSC_ANY 0x0F +#define I365_CSC_GPI 0x10 + +/* Flags for I365_ADDRWIN */ +#define I365_ENA_IO(map) (0x40 << (map)) +#define I365_ENA_MEM(map) (0x01 << (map)) + +/* Flags for I365_IOCTL */ +#define I365_IOCTL_MASK(map) (0x0F << (map<<2)) +#define I365_IOCTL_WAIT(map) (0x08 << (map<<2)) +#define I365_IOCTL_0WS(map) (0x04 << (map<<2)) +#define I365_IOCTL_IOCS16(map) (0x02 << (map<<2)) +#define I365_IOCTL_16BIT(map) (0x01 << (map<<2)) + +/* Flags for I365_GENCTL */ +#define I365_CTL_16DELAY 0x01 +#define I365_CTL_RESET 0x02 +#define I365_CTL_GPI_ENA 0x04 +#define I365_CTL_GPI_CTL 0x08 +#define I365_CTL_RESUME 0x10 +#define I365_CTL_SW_IRQ 0x20 + +/* Flags for I365_GBLCTL */ +#define I365_GBL_PWRDOWN 0x01 +#define I365_GBL_CSC_LEV 0x02 +#define I365_GBL_WRBACK 0x04 +#define I365_GBL_IRQ_0_LEV 0x08 +#define I365_GBL_IRQ_1_LEV 0x10 + +/* Flags for memory window registers */ +#define I365_MEM_16BIT 0x8000 /* In memory start high byte */ +#define I365_MEM_0WS 0x4000 +#define I365_MEM_WS1 0x8000 /* In memory stop high byte */ +#define I365_MEM_WS0 0x4000 +#define I365_MEM_WRPROT 0x8000 /* In offset high byte */ +#define I365_MEM_REG 0x4000 + +#define I365_REG(slot, reg) (((slot) << 6) + reg) + +#endif /* _LINUX_I82365_H */ + +//***************************************************************************** +//***************************************************************************** +//***************************************************************************** +//***************************************************************************** +//***************************************************************************** +// Beginning vg468.h (for VADEM chipset) + +#ifndef _LINUX_VG468_H +#define _LINUX_VG468_H + +/* Special bit in I365_IDENT used for Vadem chip detection */ +#define I365_IDENT_VADEM 0x08 + +/* Special definitions in I365_POWER */ +#define VG468_VPP2_MASK 0x0c +#define VG468_VPP2_5V 0x04 +#define VG468_VPP2_12V 0x08 + +/* Unique Vadem registers */ +#define VG469_VSENSE 0x1f /* Card voltage sense */ +#define VG469_VSELECT 0x2f /* Card voltage select */ +#define VG468_CTL 0x38 /* Control register */ +#define VG468_TIMER 0x39 /* Timer control */ +#define VG468_MISC 0x3a /* Miscellaneous */ +#define VG468_GPIO_CFG 0x3b /* GPIO configuration */ +#define VG469_EXT_MODE 0x3c /* Extended mode register */ +#define VG468_SELECT 0x3d /* Programmable chip select */ +#define VG468_SELECT_CFG 0x3e /* Chip select configuration */ +#define VG468_ATA 0x3f /* ATA control */ + +/* Flags for VG469_VSENSE */ +#define VG469_VSENSE_A_VS1 0x01 +#define VG469_VSENSE_A_VS2 0x02 +#define VG469_VSENSE_B_VS1 0x04 +#define VG469_VSENSE_B_VS2 0x08 + +/* Flags for VG469_VSELECT */ +#define VG469_VSEL_VCC 0x03 +#define VG469_VSEL_5V 0x00 +#define VG469_VSEL_3V 0x03 +#define VG469_VSEL_MAX 0x0c +#define VG469_VSEL_EXT_STAT 0x10 +#define VG469_VSEL_EXT_BUS 0x20 +#define VG469_VSEL_MIXED 0x40 +#define VG469_VSEL_ISA 0x80 + +/* Flags for VG468_CTL */ +#define VG468_CTL_SLOW 0x01 /* 600ns memory timing */ +#define VG468_CTL_ASYNC 0x02 /* Asynchronous bus clocking */ +#define VG468_CTL_TSSI 0x08 /* Tri-state some outputs */ +#define VG468_CTL_DELAY 0x10 /* Card detect debounce */ +#define VG468_CTL_INPACK 0x20 /* Obey INPACK signal? */ +#define VG468_CTL_POLARITY 0x40 /* VCCEN polarity */ +#define VG468_CTL_COMPAT 0x80 /* Compatibility stuff */ + +#define VG469_CTL_WS_COMPAT 0x04 /* Wait state compatibility */ +#define VG469_CTL_STRETCH 0x10 /* LED stretch */ + +/* Flags for VG468_TIMER */ +#define VG468_TIMER_ZEROPWR 0x10 /* Zero power control */ +#define VG468_TIMER_SIGEN 0x20 /* Power up */ +#define VG468_TIMER_STATUS 0x40 /* Activity timer status */ +#define VG468_TIMER_RES 0x80 /* Timer resolution */ +#define VG468_TIMER_MASK 0x0f /* Activity timer timeout */ + +/* Flags for VG468_MISC */ +#define VG468_MISC_GPIO 0x04 /* General-purpose IO */ +#define VG468_MISC_DMAWSB 0x08 /* DMA wait state control */ +#define VG469_MISC_LEDENA 0x10 /* LED enable */ +#define VG468_MISC_VADEMREV 0x40 /* Vadem revision control */ +#define VG468_MISC_UNLOCK 0x80 /* Unique register lock */ + +/* Flags for VG469_EXT_MODE_A */ +#define VG469_MODE_VPPST 0x03 /* Vpp steering control */ +#define VG469_MODE_INT_SENSE 0x04 /* Internal voltage sense */ +#define VG469_MODE_CABLE 0x08 +#define VG469_MODE_COMPAT 0x10 /* i82365sl B or DF step */ +#define VG469_MODE_TEST 0x20 +#define VG469_MODE_RIO 0x40 /* Steer RIO to INTR? */ + +/* Flags for VG469_EXT_MODE_B */ +#define VG469_MODE_B_3V 0x01 /* 3.3v for socket B */ + +#endif /* _LINUX_VG468_H */ + + +//***************************************************************************** +//***************************************************************************** +//***************************************************************************** +//***************************************************************************** +//***************************************************************************** +// Beginning ricoh.h (RICOH chipsets) + +#ifndef _LINUX_RICOH_H +#define _LINUX_RICOH_H + + +#define RF5C_MODE_CTL 0x1f /* Mode control */ +#define RF5C_PWR_CTL 0x2f /* Mixed voltage control */ +#define RF5C_CHIP_ID 0x3a /* Chip identification */ +#define RF5C_MODE_CTL_3 0x3b /* Mode control 3 */ + +/* I/O window address offset */ +#define RF5C_IO_OFF(w) (0x36+((w)<<1)) + +/* Flags for RF5C_MODE_CTL */ +#define RF5C_MODE_ATA 0x01 /* ATA mode */ +#define RF5C_MODE_LED_ENA 0x02 /* IRQ 12 is LED */ +#define RF5C_MODE_CA21 0x04 +#define RF5C_MODE_CA22 0x08 +#define RF5C_MODE_CA23 0x10 +#define RF5C_MODE_CA24 0x20 +#define RF5C_MODE_CA25 0x40 +#define RF5C_MODE_3STATE_BIT7 0x80 + +/* Flags for RF5C_PWR_CTL */ +#define RF5C_PWR_VCC_3V 0x01 +#define RF5C_PWR_IREQ_HIGH 0x02 +#define RF5C_PWR_INPACK_ENA 0x04 +#define RF5C_PWR_5V_DET 0x08 +#define RF5C_PWR_TC_SEL 0x10 /* Terminal Count: irq 11 or 15 */ +#define RF5C_PWR_DREQ_LOW 0x20 +#define RF5C_PWR_DREQ_OFF 0x00 /* DREQ steering control */ +#define RF5C_PWR_DREQ_INPACK 0x40 +#define RF5C_PWR_DREQ_SPKR 0x80 +#define RF5C_PWR_DREQ_IOIS16 0xc0 + +/* Values for RF5C_CHIP_ID */ +#define RF5C_CHIP_RF5C296 0x32 +#define RF5C_CHIP_RF5C396 0xb2 + +/* Flags for RF5C_MODE_CTL_3 */ +#define RF5C_MCTL3_DISABLE 0x01 /* Disable PCMCIA interface */ +#define RF5C_MCTL3_DMA_ENA 0x02 + +/* Register definitions for Ricoh PCI-to-CardBus bridges */ + +/* Extra bits in CB_BRIDGE_CONTROL */ +#define RL5C46X_BCR_3E0_ENA 0x0800 +#define RL5C46X_BCR_3E2_ENA 0x1000 + +/* Bridge Configuration Register */ +#define RL5C4XX_CONFIG 0x80 /* 16 bit */ +#define RL5C4XX_CONFIG_IO_1_MODE 0x0200 +#define RL5C4XX_CONFIG_IO_0_MODE 0x0100 +#define RL5C4XX_CONFIG_PREFETCH 0x0001 + + +/* Misc Control Register */ +#define RL5C4XX_MISC 0x0082 /* 16 bit */ +#define RL5C4XX_MISC_HW_SUSPEND_ENA 0x0002 +#define RL5C4XX_MISC_VCCEN_POL 0x0100 +#define RL5C4XX_MISC_VPPEN_POL 0x0200 +#define RL5C46X_MISC_SUSPEND 0x0001 +#define RL5C46X_MISC_PWR_SAVE_2 0x0004 +#define RL5C46X_MISC_IFACE_BUSY 0x0008 +#define RL5C46X_MISC_B_LOCK 0x0010 +#define RL5C46X_MISC_A_LOCK 0x0020 +#define RL5C46X_MISC_PCI_LOCK 0x0040 +#define RL5C47X_MISC_IFACE_BUSY 0x0004 +#define RL5C47X_MISC_PCI_INT_MASK 0x0018 +#define RL5C47X_MISC_PCI_INT_DIS 0x0020 +#define RL5C47X_MISC_SUBSYS_WR 0x0040 +#define RL5C47X_MISC_SRIRQ_ENA 0x0080 +#define RL5C47X_MISC_5V_DISABLE 0x0400 +#define RL5C47X_MISC_LED_POL 0x0800 + +/* 16-bit Interface Control Register */ +#define RL5C4XX_16BIT_CTL 0x0084 /* 16 bit */ +#define RL5C4XX_16CTL_IO_TIMING 0x0100 +#define RL5C4XX_16CTL_MEM_TIMING 0x0200 +#define RL5C46X_16CTL_LEVEL_1 0x0010 +#define RL5C46X_16CTL_LEVEL_2 0x0020 + +/* 16-bit IO and memory timing registers */ +#define RL5C4XX_16BIT_IO_0 0x0088 /* 16 bit */ +#define RL5C4XX_16BIT_MEM_0 0x0088 /* 16 bit */ +#define RL5C4XX_SETUP_MASK 0x0007 +#define RL5C4XX_SETUP_SHIFT 0 +#define RL5C4XX_CMD_MASK 0x01f0 +#define RL5C4XX_CMD_SHIFT 4 +#define RL5C4XX_HOLD_MASK 0x1c00 +#define RL5C4XX_HOLD_SHIFT 10 +#define RL5C4XX_MISC_CONTROL 0x2F /* 8 bit */ +#define RL5C4XX_ZV_ENABLE 0x08 + +#endif /* _LINUX_RICOH_H */ + + +//***************************************************************************** +//***************************************************************************** +//***************************************************************************** +//***************************************************************************** +//***************************************************************************** +// Beginning cirrus.h (CIRRUS chipsets) + +#ifndef _LINUX_CIRRUS_H +#define _LINUX_CIRRUS_H + +#ifndef PCI_VENDOR_ID_CIRRUS +#define PCI_VENDOR_ID_CIRRUS 0x1013 +#endif +#ifndef PCI_DEVICE_ID_CIRRUS_6729 +#define PCI_DEVICE_ID_CIRRUS_6729 0x1100 +#endif +#ifndef PCI_DEVICE_ID_CIRRUS_6832 +#define PCI_DEVICE_ID_CIRRUS_6832 0x1110 +#endif + +#define PD67_MISC_CTL_1 0x16 /* Misc control 1 */ +#define PD67_FIFO_CTL 0x17 /* FIFO control */ +#define PD67_MISC_CTL_2 0x1E /* Misc control 2 */ +#define PD67_CHIP_INFO 0x1f /* Chip information */ +#define PD67_ATA_CTL 0x026 /* 6730: ATA control */ +#define PD67_EXT_INDEX 0x2e /* Extension index */ +#define PD67_EXT_DATA 0x2f /* Extension data */ + +/* PD6722 extension registers -- indexed in PD67_EXT_INDEX */ +#define PD67_DATA_MASK0 0x01 /* Data mask 0 */ +#define PD67_DATA_MASK1 0x02 /* Data mask 1 */ +#define PD67_DMA_CTL 0x03 /* DMA control */ + +/* PD6730 extension registers -- indexed in PD67_EXT_INDEX */ +#define PD67_EXT_CTL_1 0x03 /* Extension control 1 */ +#define PD67_MEM_PAGE(n) ((n)+5) /* PCI window bits 31:24 */ +#define PD67_EXTERN_DATA 0x0a +#define PD67_MISC_CTL_3 0x25 +#define PD67_SMB_PWR_CTL 0x26 + +/* I/O window address offset */ +#define PD67_IO_OFF(w) (0x36+((w)<<1)) + +/* Timing register sets */ +#define PD67_TIME_SETUP(n) (0x3a + 3*(n)) +#define PD67_TIME_CMD(n) (0x3b + 3*(n)) +#define PD67_TIME_RECOV(n) (0x3c + 3*(n)) + +/* Flags for PD67_MISC_CTL_1 */ +#define PD67_MC1_5V_DET 0x01 /* 5v detect */ +#define PD67_MC1_MEDIA_ENA 0x01 /* 6730: Multimedia enable */ +#define PD67_MC1_VCC_3V 0x02 /* 3.3v Vcc */ +#define PD67_MC1_PULSE_MGMT 0x04 +#define PD67_MC1_PULSE_IRQ 0x08 +#define PD67_MC1_SPKR_ENA 0x10 +#define PD67_MC1_INPACK_ENA 0x80 + +/* Flags for PD67_FIFO_CTL */ +#define PD67_FIFO_EMPTY 0x80 + +/* Flags for PD67_MISC_CTL_2 */ +#define PD67_MC2_FREQ_BYPASS 0x01 +#define PD67_MC2_DYNAMIC_MODE 0x02 +#define PD67_MC2_SUSPEND 0x04 +#define PD67_MC2_5V_CORE 0x08 +#define PD67_MC2_LED_ENA 0x10 /* IRQ 12 is LED enable */ +#define PD67_MC2_FAST_PCI 0x10 /* 6729: PCI bus > 25 MHz */ +#define PD67_MC2_3STATE_BIT7 0x20 /* Floppy change bit */ +#define PD67_MC2_DMA_MODE 0x40 +#define PD67_MC2_IRQ15_RI 0x80 /* IRQ 15 is ring enable */ + +/* Flags for PD67_CHIP_INFO */ +#define PD67_INFO_SLOTS 0x20 /* 0 = 1 slot, 1 = 2 slots */ +#define PD67_INFO_CHIP_ID 0xc0 +#define PD67_INFO_REV 0x1c + +/* Fields in PD67_TIME_* registers */ +#define PD67_TIME_SCALE 0xc0 +#define PD67_TIME_SCALE_1 0x00 +#define PD67_TIME_SCALE_16 0x40 +#define PD67_TIME_SCALE_256 0x80 +#define PD67_TIME_SCALE_4096 0xc0 +#define PD67_TIME_MULT 0x3f + +/* Fields in PD67_DMA_CTL */ +#define PD67_DMA_MODE 0xc0 +#define PD67_DMA_OFF 0x00 +#define PD67_DMA_DREQ_INPACK 0x40 +#define PD67_DMA_DREQ_WP 0x80 +#define PD67_DMA_DREQ_BVD2 0xc0 +#define PD67_DMA_PULLUP 0x20 /* Disable socket pullups? */ + +/* Fields in PD67_EXT_CTL_1 */ +#define PD67_EC1_VCC_PWR_LOCK 0x01 +#define PD67_EC1_AUTO_PWR_CLEAR 0x02 +#define PD67_EC1_LED_ENA 0x04 +#define PD67_EC1_INV_CARD_IRQ 0x08 +#define PD67_EC1_INV_MGMT_IRQ 0x10 +#define PD67_EC1_PULLUP_CTL 0x20 + +/* Fields in PD67_MISC_CTL_3 */ +#define PD67_MC3_IRQ_MASK 0x03 +#define PD67_MC3_IRQ_PCPCI 0x00 +#define PD67_MC3_IRQ_EXTERN 0x01 +#define PD67_MC3_IRQ_PCIWAY 0x02 +#define PD67_MC3_IRQ_PCI 0x03 +#define PD67_MC3_PWR_MASK 0x0c +#define PD67_MC3_PWR_SERIAL 0x00 +#define PD67_MC3_PWR_TI2202 0x08 +#define PD67_MC3_PWR_SMB 0x0c + +/* Register definitions for Cirrus PD6832 PCI-to-CardBus bridge */ + +/* PD6832 extension registers -- indexed in PD67_EXT_INDEX */ +#define PD68_EXT_CTL_2 0x0b +#define PD68_PCI_SPACE 0x22 +#define PD68_PCCARD_SPACE 0x23 +#define PD68_WINDOW_TYPE 0x24 +#define PD68_EXT_CSC 0x2e +#define PD68_MISC_CTL_4 0x2f +#define PD68_MISC_CTL_5 0x30 +#define PD68_MISC_CTL_6 0x31 + +/* Extra flags in PD67_MISC_CTL_3 */ +#define PD68_MC3_HW_SUSP 0x10 +#define PD68_MC3_MM_EXPAND 0x40 +#define PD68_MC3_MM_ARM 0x80 + +/* Bridge Control Register */ +#define PD6832_BCR_MGMT_IRQ_ENA 0x0800 + +/* Socket Number Register */ +#define PD6832_SOCKET_NUMBER 0x004c /* 8 bit */ + +#endif /* _LINUX_CIRRUS_H */ + + + -- cgit v1.2.3-55-g7522