/* xscreensaver-command, Copyright (c) 1991-2019 Jamie Zawinski <jwz@jwz.org>
*
* Permission to use, copy, modify, distribute, and sell this software and its
* documentation for any purpose is hereby granted without fee, provided that
* the above copyright notice appear in all copies and that both that
* copyright notice and this permission notice appear in supporting
* documentation. No representations are made about the suitability of this
* software for any purpose. It is provided "as is" without express or
* implied warranty.
*/
#ifdef HAVE_CONFIG_H
# include "config.h"
#endif
#include <stdio.h>
#include <stdlib.h>
#include <time.h>
#include <sys/time.h>
#include <sys/types.h>
#ifdef HAVE_UNISTD_H
# include <unistd.h>
#endif
/* #include <X11/Xproto.h> / * for CARD32 */
#include <X11/Xlib.h>
#include <X11/Xatom.h>
#include <X11/Xutil.h> /* for XGetClassHint() */
#include <X11/Xos.h>
#include <X11/Intrinsic.h> /* only needed to get through xscreensaver.h */
/* You might think that to read an array of 32-bit quantities out of a
server-side property, you would pass an array of 32-bit data quantities
into XGetWindowProperty(). You would be wrong. You have to use an array
of longs, even if long is 64 bits (using 32 of each 64.)
*/
typedef long PROP32;
#include "remote.h"
#include "version.h"
#ifdef _VROOT_H_
ERROR! you must not include vroot.h in this file
#endif
char *progname;
Atom XA_VROOT;
Atom XA_SCREENSAVER, XA_SCREENSAVER_VERSION, XA_SCREENSAVER_RESPONSE;
Atom XA_SCREENSAVER_ID, XA_SCREENSAVER_STATUS, XA_SELECT, XA_DEMO, XA_EXIT;
Atom XA_BLANK, XA_LOCK, XA_ACTIVATE, XA_SUSPEND, XA_NEXT, XA_PREV;
static Atom XA_DEACTIVATE, XA_CYCLE;
static Atom XA_RESTART, XA_PREFS, XA_THROTTLE, XA_UNTHROTTLE;
static char *screensaver_version;
# ifdef __GNUC__
__extension__ /* don't warn about "string length is greater than the
length ISO C89 compilers are required to support" in the
usage string... */
# endif
static char *usage = "\n\
usage: %s -<option>\n\
\n\
This program provides external control of a running xscreensaver process.\n\
Version %s, copyright (c) 1991-%s Jamie Zawinski <jwz@jwz.org>.\n\
\n\
The xscreensaver program is a daemon that runs in the background.\n\
You control a running xscreensaver process by sending it messages\n\
with this program, xscreensaver-command. See the man pages for\n\
details. These are the arguments understood by xscreensaver-command:\n\
\n\
-demo Ask the xscreensaver process to enter interactive demo mode.\n\
\n\
-prefs Ask the xscreensaver process to bring up the preferences\n\
panel.\n\
\n\
-activate Turn on the screensaver (blank the screen), as if the user\n\
had been idle for long enough.\n\
\n\
-deactivate Turns off the screensaver (un-blank the screen), as if user\n\
activity had been detected.\n\
\n\
-cycle If the screensaver is active (the screen is blanked), then\n\
stop the current graphics demo and run a new one (chosen\n\
randomly.)\n\
\n\
-next Like either -activate or -cycle, depending on which is more\n\
appropriate, except that the graphics hack that will be run\n\
is the next one in the list, instead of a randomly-chosen\n\
one. In other words, repeatedly executing -next will cause\n\
the xscreensaver process to invoke each graphics demo\n\
sequentially. (Though using the -demo option is probably\n\
an easier way to accomplish that.)\n\
\n\
-prev Like -next, but goes in the other direction.\n\
\n\
-select <N> Like -activate, but runs the Nth element in the list of\n\
hacks. By knowing what is in the `programs' list, and in\n\
what order, you can use this to activate the screensaver\n\
with a particular graphics demo. (The first element in the\n\
list is numbered 1, not 0.)\n\
\n\
-exit Causes the xscreensaver process to exit gracefully.\n\
This does nothing if the display is currently locked.\n\
(Note that one must *never* kill xscreensaver with -9!)\n\
\n\
-restart Causes the screensaver process to exit and then restart with\n\
the same command line arguments as last time. You shouldn't\n\
really need to do this, since xscreensaver notices when the\n\
.xscreensaver file has changed and re-reads it as needed.\n\
\n\
-lock Tells the running xscreensaver process to lock the screen\n\
immediately. This is like -activate, but forces locking as\n\
well, even if locking is not the default. If the saver is\n\
already active, this causes it to be locked as well.\n\
\n\
-suspend Like -activate, but ignores the lock-timeout, if any, and\n\
immediately powers off the screen without fading out.\n\
This is intended to be run just after your laptop's lid\n\
is closed, and just before the CPU halts.\n\
\n\
-version Prints the version of xscreensaver that is currently running\n\
on the display -- that is, the actual version number of the\n\
running xscreensaver background process, rather than the\n\
version number of xscreensaver-command.\n\
\n\
-time Prints the time at which the screensaver last activated or\n\
deactivated (roughly, how long the user has been idle or\n\
non-idle -- but not quite, since it only tells you when the\n\
screen became blanked or un-blanked.)\n\
\n\
-watch Prints a line each time the screensaver changes state: when\n\
the screen blanks, locks, unblanks, or when the running hack\n\
is changed. This option never returns; it is intended for\n\
use by shell scripts that want to react to the screensaver\n\
in some way.\n\
\n\
See the man page for more details.\n\
For updates, check https://www.jwz.org/xscreensaver/\n\
\n";
/* Note: The "-throttle" command is deprecated -- it predates the XDPMS
extension. Instead of using -throttle, users should instead just
power off the monitor (e.g., "xset dpms force off".) In a few
minutes, the xscreensaver daemon will notice that the monitor is
off, and cease running hacks.
*/
#define USAGE() do { \
fprintf (stderr, usage, progname, screensaver_version, year); exit (1); \
} while(0)
static int watch (Display *);
int
main (int argc, char **argv)
{
Display *dpy;
int i;
char *dpyname = 0;
Atom *cmd = 0;
long arg = 0L;
char *s;
Atom XA_WATCH = 0; /* kludge: not really an atom */
char year[5];
progname = argv[0];
s = strrchr (progname, '/');
if (s) progname = s+1;
screensaver_version = (char *) malloc (5);
memcpy (screensaver_version, screensaver_id + 17, 4);
screensaver_version [4] = 0;
s = strchr (screensaver_id, '-');
s = strrchr (s, '-');
s++;
strncpy (year, s, 4);
year[4] = 0;
for (i = 1; i < argc; i++)
{
const char *s = argv [i];
int L;
if (s[0] == '-' && s[1] == '-') s++;
L = strlen (s);
if (L < 2) USAGE ();
if (!strncmp (s, "-display", L)) dpyname = argv [++i];
else if (cmd) USAGE();
else if (!strncmp (s, "-activate", L)) cmd = &XA_ACTIVATE;
else if (!strncmp (s, "-deactivate", L)) cmd = &XA_DEACTIVATE;
else if (!strncmp (s, "-suspend", L)) cmd = &XA_SUSPEND;
else if (!strncmp (s, "-cycle", L)) cmd = &XA_CYCLE;
else if (!strncmp (s, "-next", L)) cmd = &XA_NEXT;
else if (!strncmp (s, "-prev", L)) cmd = &XA_PREV;
else if (!strncmp (s, "-select", L)) cmd = &XA_SELECT;
else if (!strncmp (s, "-exit", L)) cmd = &XA_EXIT;
else if (!strncmp (s, "-restart", L)) cmd = &XA_RESTART;
else if (!strncmp (s, "-demo", L)) cmd = &XA_DEMO;
else if (!strncmp (s, "-preferences",L)) cmd = &XA_PREFS;
else if (!strncmp (s, "-prefs",L)) cmd = &XA_PREFS;
else if (!strncmp (s, "-lock", L)) cmd = &XA_LOCK;
else if (!strncmp (s, "-throttle", L)) cmd = &XA_THROTTLE;
else if (!strncmp (s, "-unthrottle", L)) cmd = &XA_UNTHROTTLE;
else if (!strncmp (s, "-version", L)) cmd = &XA_SCREENSAVER_VERSION;
else if (!strncmp (s, "-time", L)) cmd = &XA_SCREENSAVER_STATUS;
else if (!strncmp (s, "-watch", L)) cmd = &XA_WATCH;
else USAGE ();
if (cmd == &XA_SELECT || cmd == &XA_DEMO)
{
long a;
char c;
if (i+1 < argc && (1 == sscanf(argv[i+1], " %ld %c", &a, &c)))
{
arg = a;
i++;
}
}
}
if (!cmd)
USAGE ();
if (arg < 0)
/* no command may have a negative argument. */
USAGE();
else if (arg == 0)
{
/* SELECT must have a non-zero argument. */
if (cmd == &XA_SELECT)
USAGE();
}
else /* arg > 0 */
{
/* no command other than SELECT and DEMO may have a non-zero argument. */
if (cmd != &XA_DEMO && cmd != &XA_SELECT)
USAGE();
}
/* For backward compatibility: -demo with no arguments used to send a
"DEMO 0" ClientMessage to the xscreensaver process, which brought up
the built-in demo mode dialog. Now that the demo mode dialog is no
longer built in, we bring it up by just running the "xscreensaver-demo"
program.
Note that "-DEMO <n>" still sends a ClientMessage.
*/
if (cmd == &XA_PREFS ||
(cmd == &XA_DEMO && arg == 0))
{
char buf [512];
char *new_argv[] = { "xscreensaver-demo", 0, 0, 0, 0, 0 };
int ac = 1;
if (dpyname)
{
new_argv[ac++] = "-display";
new_argv[ac++] = dpyname;
}
if (cmd == &XA_PREFS)
new_argv[ac++] = "-prefs";
fflush(stdout);
fflush(stderr);
execvp (new_argv[0], new_argv); /* shouldn't return */
sprintf (buf, "%s: could not exec %s", progname, new_argv[0]);
perror(buf);
fflush(stdout);
fflush(stderr);
exit (-1);
}
if (!dpyname) dpyname = (char *) getenv ("DISPLAY");
if (!dpyname)
{
dpyname = ":0.0";
fprintf (stderr,
"%s: warning: $DISPLAY is not set: defaulting to \"%s\".\n",
progname, dpyname);
}
dpy = XOpenDisplay (dpyname);
if (!dpy)
{
fprintf (stderr, "%s: can't open display %s\n", progname,
(dpyname ? dpyname : "(null)"));
exit (1);
}
XA_VROOT = XInternAtom (dpy, "__SWM_VROOT", False);
XA_SCREENSAVER = XInternAtom (dpy, "SCREENSAVER", False);
XA_SCREENSAVER_ID = XInternAtom (dpy, "_SCREENSAVER_ID", False);
XA_SCREENSAVER_VERSION = XInternAtom (dpy, "_SCREENSAVER_VERSION",False);
XA_SCREENSAVER_STATUS = XInternAtom (dpy, "_SCREENSAVER_STATUS", False);
XA_SCREENSAVER_RESPONSE = XInternAtom (dpy, "_SCREENSAVER_RESPONSE", False);
XA_ACTIVATE = XInternAtom (dpy, "ACTIVATE", False);
XA_DEACTIVATE = XInternAtom (dpy, "DEACTIVATE", False);
XA_SUSPEND = XInternAtom (dpy, "SUSPEND", False);
XA_RESTART = XInternAtom (dpy, "RESTART", False);
XA_CYCLE = XInternAtom (dpy, "CYCLE", False);
XA_NEXT = XInternAtom (dpy, "NEXT", False);
XA_PREV = XInternAtom (dpy, "PREV", False);
XA_SELECT = XInternAtom (dpy, "SELECT", False);
XA_EXIT = XInternAtom (dpy, "EXIT", False);
XA_DEMO = XInternAtom (dpy, "DEMO", False);
XA_PREFS = XInternAtom (dpy, "PREFS", False);
XA_LOCK = XInternAtom (dpy, "LOCK", False);
XA_BLANK = XInternAtom (dpy, "BLANK", False);
XA_THROTTLE = XInternAtom (dpy, "THROTTLE", False);
XA_UNTHROTTLE = XInternAtom (dpy, "UNTHROTTLE", False);
XSync (dpy, 0);
if (cmd == &XA_WATCH)
{
i = watch (dpy);
exit (i);
}
if (*cmd == XA_ACTIVATE || *cmd == XA_LOCK || *cmd == XA_SUSPEND ||
*cmd == XA_NEXT || *cmd == XA_PREV || *cmd == XA_SELECT)
/* People never guess that KeyRelease deactivates the screen saver too,
so if we're issuing an activation command, wait a second.
No need to do this if stdin is not a tty, meaning we're not being
run from the command line.
*/
if (isatty(0))
sleep (1);
i = xscreensaver_command (dpy, *cmd, arg, True, NULL);
if (i < 0) exit (i);
else exit (0);
}
static int
watch (Display *dpy)
{
char *v = 0;
Window window = RootWindow (dpy, 0);
XWindowAttributes xgwa;
XEvent event;
PROP32 *last = 0;
if (v) free (v);
XGetWindowAttributes (dpy, window, &xgwa);
XSelectInput (dpy, window, xgwa.your_event_mask | PropertyChangeMask);
while (1)
{
XNextEvent (dpy, &event);
if (event.xany.type == PropertyNotify &&
event.xproperty.state == PropertyNewValue &&
event.xproperty.atom == XA_SCREENSAVER_STATUS)
{
Atom type;
int format;
unsigned long nitems, bytesafter;
unsigned char *dataP = 0;
if (XGetWindowProperty (dpy,
RootWindow (dpy, 0), /* always screen #0 */
XA_SCREENSAVER_STATUS,
0, 999, False, XA_INTEGER,
&type, &format, &nitems, &bytesafter,
&dataP)
== Success
&& type
&& dataP)
{
time_t tt;
char *s;
Bool changed = False;
Bool running = False;
PROP32 *data = (PROP32 *) dataP;
if (type != XA_INTEGER || nitems < 3)
{
STATUS_LOSE:
if (last) XFree (last);
if (data) XFree (data);
fprintf (stderr, "%s: bad status format on root window.\n",
progname);
return -1;
}
tt = (time_t) data[1];
if (tt <= (time_t) 666000000L) /* early 1991 */
goto STATUS_LOSE;
s = ctime(&tt);
if (s[strlen(s)-1] == '\n')
s[strlen(s)-1] = 0;
if (!last || data[0] != last[0])
{
/* State changed. */
if (data[0] == XA_BLANK)
printf ("BLANK %s\n", s);
else if (data[0] == XA_LOCK)
printf ("LOCK %s\n", s);
else if (data[0] == 0)
printf ("UNBLANK %s\n", s);
else
goto STATUS_LOSE;
}
if (!last)
changed = True;
else
{
int i;
for (i = 2; i < nitems; i++)
{
if (data[i] != last[i])
changed = True;
if (data[i])
running = True;
}
}
if (running && changed)
{
int i;
fprintf (stdout, "RUN");
for (i = 2; i < nitems; i++)
fprintf (stdout, " %d", (int) data[i]);
fprintf (stdout, "\n");
}
fflush (stdout);
if (last) XFree (last);
last = data;
}
else
{
if (last) XFree (last);
if (dataP) XFree (dataP);
fprintf (stderr, "%s: no saver status on root window.\n",
progname);
return -1;
}
}
}
}
