# Makefile for program source directory in GNU NLS utilities package.
# Copyright (C) 1995, 1996, 1997 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
#
# This file file be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
#
# - Modified by Owen Taylor <otaylor@redhat.com> to use GETTEXT_PACKAGE
# instead of PACKAGE and to look for po2tbl in ./ not in intl/
#
# - Modified by jacob berkman <jacob@ximian.com> to install
# Makefile.in.in and po2tbl.sed.in for use with glib-gettextize
#
# - Modified by jwz to not suck wet farts from dead pigeons.
# This is truly one of the worst-written Makefiles I've ever seen.
# Problems I (tried to) fix:
#
# - MKINSTALLDIRS was $(top_srcdir)/@MKINSTALLDIRS@, but the
# configure script already put $(top_srcdir) into @MKINSTALLDIRS@,
# so the result was an absolute path that didn't work at all.
#
# - GMSGFMT and XGETTEXT set $PATH to some random value before
# running the program. That's completely stupid, and anyway,
# the hardcoded $PATH value they were using (../src) do not
# apply to xscreensaver.
#
# - the .po.gmo, .po.cat, .po.pox, .pot, install-data-yes, update-po, and
# uninstall rules didn't actually print the commands they were
# executing: they just dumped a bunch of sh code at you, and expected
# you to figure it out yourself. This is typical behavior of Makefile
# rules written by morons.
#
# - intltool-update prints a lot of useless crap to both stderr and
# stdout and has no command-line argument meaning "be quiet, and only
# print errors", so I just redirected the whole thing to /dev/null.
#
# - Demonstrating a total misunderstanding of build-directories and
# VPATH, the .po.gmo rule was writing output to $(srcdir). When
# the current directory is not $(srcdir), one *never* writes to
# $(srcdir) -- it is to be considered read-only.
#
# - Likewise, install-data-yes was looking for .gmo files in both the
# current directory, and in $(srcdir). In the case where those are
# not the same directory, there must be no .gmo files in $(srcdir).
#
# - The update-po rule was explicitly writing to $(srcdir). I changed
# it to just work in the current directory. As I understand it, it
# only makes sense to run this rule while in the srcdir, e.g., from
# distdepend -- so it should be allowed to error out when run in an
# inappropriate directory.
#
# - install-data-yes went through great code-duplication-contortions
# to cope with the file mentioned by MKINSTALLDIRS not actually
# existing! Instead of assuming that MKINSTALLDIRS will be set to
# an actual, correct value, it had a hardcoded check to look for it
# in $(top_srcdir) as well! WTF!
#
# - It turns out that "msgfmt" silently fails to write a .gmo file
# if the source .po file is empty (or otherwise not yet written.)
# The install-data-yes rule made no provision for this, and would
# just error out when the .gmo files were not there.
#
# - $(DESTDIR) was being used where $(install_prefix) should have been.
#
# - For xscreensaver, $(prefix) is generally /usr/X11R6/, but some files
# need to go under /usr/ instead of under /usr/X11R6/ -- for those, we
# use @PO_DATADIR@ instead of @prefix@. So I changed $(datadir) and
# $(gnulocaledir) appropriately.
#
# - WTF is $(gettextsrcdir) doing in here?
#
# - added "*.gmo *.pot" to "distclean".
#
# - I added a rule to po/POTFILES.in so that I wouldn't have to maintain
# that list of files in two places.
#
# - I removed the rule to auto-regenerate Makefile from Makefile.in.in
# because it made my top-level "make distdepend" rule fail: things
# were executing in the wrong order.
#
# - the .po.cat rule has a hardcoded "../intl/po2msg.sed" in it.
# Guess what, I don't have any such directory. And that should be
# refering to $(srcdir) anyway. So I just commented (my half-fixed
# version of) this rule out.
#
# config.status complains if "po/Makefile.in.in was not created by intltoolize".
# INTLTOOL_MAKEFILE
GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
PACKAGE = @PACKAGE@
VERSION = @VERSION@
SHELL = /bin/sh
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ..
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
#datadir = $(prefix)/@DATADIRNAME@ -- not for xscreensaver
datadir = @PO_DATADIR@
datarootdir = @datarootdir@
localedir = $(datadir)/locale
#localedir = $(prefix)/share/locale
#gnulocaledir = $(prefix)/share/locale -- not for xscreensaver
gnulocaledir = $(localedir)
#gettextsrcdir = $(prefix)/share/glib-2.0/gettext/po
subdir = po
DESTDIR = $(install_prefix)
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
# #### NO. This gets me "..//usr/bin/install: No such file or directory".
# The @MKINSTALLDIRS@ variable must have the absolute (or unqualified)
# path of the install program. --jwz.
# MKINSTALLDIRS = $(top_builddir)/@MKINSTALLDIRS@
MKINSTALLDIRS = @MKINSTALLDIRS@
CC = @CC@
#GENCAT = @GENCAT@
GMSGFMT = @GMSGFMT@
MSGFMT = @MSGFMT@
XGETTEXT = @XGETTEXT@
INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
MSGMERGE = $(INTLTOOL_UPDATE) --gettext-package $(GETTEXT_PACKAGE) --dist
GENPOT = $(INTLTOOL_UPDATE) --gettext-package $(GETTEXT_PACKAGE) --pot
DEFS = @DEFS@
CFLAGS = @CFLAGS@
CPPFLAGS = @CPPFLAGS@
INCLUDES = -I.. -I$(top_srcdir)/intl
COMPILE = $(CC) -c $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS) $(XCFLAGS)
SOURCES =
POFILES = @POFILES@
GMOFILES = @GMOFILES@
DISTFILES_1 = ChangeLog Makefile.in.in POTFILES.in update.sh
DISTFILES = $(DISTFILES_1) $(GETTEXT_PACKAGE).pot \
$(POFILES) $(GMOFILES) $(SOURCES)
TARFILES = $(DISTFILES_1) $(POFILES) $(SOURCES)
POTFILES = \
# This comment gets stripped out
CATALOGS = @CATALOGS@
CATOBJEXT = @CATOBJEXT@
INSTOBJEXT = @INSTOBJEXT@
.SUFFIXES:
.SUFFIXES: .c .o .po .pox .gmo .mo .msg .cat
.c.o:
$(COMPILE) $<
.po.pox:
$(MAKE) $(GETTEXT_PACKAGE).pot
INTLTOOL_EXTRACT=$(INTLTOOL_EXTRACT) ; \
export INTLTOOL_EXTRACT ; \
echo $(MSGMERGE) $< $(srcdir)/$(GETTEXT_PACKAGE).pot -o $*.pox ; \
$(MSGMERGE) $< $(srcdir)/$(GETTEXT_PACKAGE).pot -o $*.pox
.po.mo:
$(MSGFMT) -o $@ $<
# jwz: the "-" means "ignore any errors here, because I don't give a shit."
.po.gmo:
@-file=`echo $* | sed 's,.*/,,'`.gmo ; \
rm -f "$$file" ; \
echo $(GMSGFMT) -o "$$file" $< ; \
$(GMSGFMT) -o "$$file" $<
#.po.cat:
# @echo "sed -f ../intl/po2msg.sed < $< > $*.msg" ; \
# sed -f ../intl/po2msg.sed < $< > $*.msg && \
# rm -f $@ && \
# echo $(GENCAT) "$@" "$*.msg" ; \
# $(GENCAT) "$@" "$*.msg"
all: all-@USE_NLS@
default: all
all-yes: $(CATALOGS)
all-no:
$(GETTEXT_PACKAGE).pot: $(POTFILES)
@INTLTOOL_EXTRACT=$(INTLTOOL_EXTRACT) ; \
export INTLTOOL_EXTRACT ; \
echo top_srcdir=$(top_srcdir) $(GENPOT) ; \
top_srcdir=$(top_srcdir) $(GENPOT)
install-strip: install
install: install-exec install-data
install-exec:
install-program:
install-man:
install-strip:
tags:
install-data: install-data-@USE_NLS@
install-data-no: all
install-data-yes: all
@set -e; \
catalogs='$(CATALOGS)'; \
losers=""; \
for cat in $$catalogs; do \
cat=`basename $$cat`; \
case "$$cat" in \
*.gmo) destdir=$(gnulocaledir);; \
*) destdir=$(localedir);; \
esac; \
lang=`echo $$cat | sed 's/\$(CATOBJEXT)$$//'`; \
dir=$(install_prefix)$$destdir/$$lang/LC_MESSAGES; \
dest=$$dir/$(GETTEXT_PACKAGE)$(INSTOBJEXT); \
if test -r $$cat -o -r $$cat.m; then \
echo $(MKINSTALLDIRS) $$dir; \
$(MKINSTALLDIRS) $$dir; \
else \
losers="$$losers $$lang"; \
fi ; \
if test -r $$cat; then \
echo $(INSTALL_DATA) $$cat $$dest; \
$(INSTALL_DATA) $$cat $$dest; \
fi; \
if test -r $$cat.m; then \
echo $(INSTALL_DATA) $$cat.m $$dest.m; \
$(INSTALL_DATA) $$cat.m $$dest.m; \
fi; \
done; \
if [ "$$losers" != '' ]; then \
echo "Warning: these catalogs were not installed:" >&2 ; \
echo " $$losers" >&2; \
fi
# Define this as empty until I found a useful application.
installcheck:
uninstall:
@catalogs='$(CATALOGS)'; \
for cat in $$catalogs; do \
cat=`basename $$cat`; \
lang=`echo $$cat | sed 's/\$(CATOBJEXT)$$//'`; \
suffix="$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE)$(INSTOBJEXT)"; \
for f in $(install_prefix)$(localedir)/$$suffix \
$(install_prefix)$(localedir)/$$suffix.m \
$(install_prefix)$(gnulocaledir)/$$suffix \
$(install_prefix)$(gnulocaledir)/$$suffix.m; do \
if [ -f $$f ]; then \
echo rm -f $$f; \
rm -f $$f; \
fi; \
done; \
done
uninstall-program:
uninstall-man:
check: all
dvi info tags TAGS ID:
mostlyclean:
rm -f core core.* *.pox $(GETTEXT_PACKAGE).po *.old.po cat-id-tbl.tmp
rm -fr *.o
clean: mostlyclean
distclean: clean
rm -f Makefile Makefile.in POTFILES *.mo *.msg *.cat *.cat.m *.gmo *.pot
rm -f stamp-it
maintainer-clean: distclean
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
rm -f $(GMOFILES)
depend:
distdepend: generate_potfiles_in update-po $(DISTFILES)
# jwz: Generates po/POTFILES.in by examining the source tree:
# that way we don't have to keep this list up to date as files are added.
#
generate_potfiles_in:
@tmp=po.$$$$ ; \
file=POTFILES.in ; \
echo "sleeping 3 seconds..." ;\
sleep 3; \
( cd $(top_srcdir); \
echo "# Auto-generated: `LANG=C date`" ; \
( grep -l '_("' driver/*.[ch] ; \
ls driver/*.glade2.in \
driver/*.desktop.in \
hacks/config/*.xml ) | sort \
) > $$tmp && \
mv $$tmp $$file && \
echo "created `pwd`/$$file"
echo_tarfiles:
@echo $(TARFILES)
distdir = ../$(GETTEXT_PACKAGE)-$(VERSION)/$(subdir)
dist distdir: update-po $(DISTFILES)
dists="$(DISTFILES)"; \
for file in $$dists; do \
ln $(srcdir)/$$file $(distdir) 2> /dev/null \
|| cp -p $(srcdir)/$$file $(distdir); \
done
update-po: Makefile
$(MAKE) $(GETTEXT_PACKAGE).pot
@catalogs='$(CATALOGS)'; \
INTLTOOL_EXTRACT=$(INTLTOOL_EXTRACT) ; \
export INTLTOOL_EXTRACT ; \
for cat in $$catalogs; do \
cat=`basename $$cat`; \
lang=`echo $$cat | sed 's/\$(CATOBJEXT)$$//'`; \
if [ ! -f $$lang.po ] ; then \
cp $(srcdir)/$$lang.po . ; \
fi ; \
cp $$lang.po $$lang.old.po; \
echo $(MSGMERGE) $$lang; \
if $(MSGMERGE) $$lang >/dev/null 2>&1; then \
rm -f $$lang.old.po; \
else \
echo "msgmerge for $$cat failed!"; \
rm -f $$lang.po; \
mv $$lang.old.po $$lang.po; \
fi; \
done
.po: Makefile
$(MAKE) $(PACKAGE).pot;
INTLTOOL_EXTRACT=$(INTLTOOL_EXTRACT) ; \
export INTLTOOL_EXTRACT ; \
echo; printf "$*: "; \
if $(MSGMERGE) $*; then \
rm -f $*.old.po; \
else \
echo "msgmerge for * failed!"; \
mv $*.old.po $*.po; \
fi; \
msgfmt --statistics $*.po; echo;
# POTFILES is created from POTFILES.in by stripping comments, empty lines
# and Intltool tags (enclosed in square brackets), and appending a full
# relative path to them
POTFILES: POTFILES.in
( if test 'x$(srcdir)' != 'x.'; then \
posrcprefix='$(top_srcdir)/'; \
else \
posrcprefix="../"; \
fi; \
rm -f $@-t $@ \
&& (sed -e '/^#/d' \
-e "s/^\[.*\] +//" \
-e '/^[ ]*$$/d' \
-e "s@.*@ $$posrcprefix& \\\\@" < $@.in \
| sed -e '$$s/\\$$//') > $@-t \
&& chmod a-w $@-t \
&& mv $@-t $@ )
# jwz: depending on stamp-it breaks distclean.
Makefile:
@if test ! -f $@; then \
rm -f stamp-it; \
$(MAKE) stamp-it; \
fi
stamp-it: Makefile.in.in ../config.status POTFILES
cd .. \
&& CONFIG_FILES=$(subdir)/Makefile.in CONFIG_HEADERS= \
$(SHELL) ./config.status
# Tell versions [3.59,3.63) of GNU make not to export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
