From 0677328054a51160b79af3fb982b852294c5e175 Mon Sep 17 00:00:00 2001
From: Oliver Tappe
Date: Wed, 20 Aug 2008 12:20:07 +0000
Subject: * merged branch 'initramfs-ng' back intro trunk - requires careful
 testing ...

git-svn-id: http://svn.openslx.org/svn/openslx/openslx/trunk@2055 95ad53e4-c205-0410-b2fa-d234c58c8868
---
 initramfs/distro-specs/suse/functions-10.2 | 170 -----------------------------
 1 file changed, 170 deletions(-)
 delete mode 100644 initramfs/distro-specs/suse/functions-10.2

(limited to 'initramfs/distro-specs/suse/functions-10.2')

diff --git a/initramfs/distro-specs/suse/functions-10.2 b/initramfs/distro-specs/suse/functions-10.2
deleted file mode 100644
index 983e7ad8..00000000
--- a/initramfs/distro-specs/suse/functions-10.2
+++ /dev/null
@@ -1,170 +0,0 @@
-# Copyright (c) 2003 - 2006 - RZ Uni Freiburg
-# Copyright (c) 2006, 2007 - OpenSLX GmbH
-#
-# This program/file is free software distributed under the GPL version 2.
-# See http://openslx.org/COPYING
-#
-# If you have any feedback please consult http://openslx.org/feedback and
-# send your feedback to feedback@openslx.org
-#
-# General information about OpenSLX can be found under http://openslx.org
-#
-# Configuration functions for SuSE 10.2 which differ from functions defined
-# in general SuSE base definitions ...  General changes should be done there,
-# version specific changes for the 10.2 go here.
-
-# configure dbus (inter application communication for kde and gnome), hal
-# (hardware abstraction layer - used e.g. by powersaved), resmgr and 
-# policykitd (resource manager/policykitd - the user gets permissions to 
-# devices when loggin on)
-config_dreshal () {
-if [ "x$start_dreshal" = "xyes" ]; then
-  local start=5
-  local stop=18
-  if [ -f /mnt/etc/${D_INITDIR}/dbus ] ; then
-    strinfile "messagebus:" /mnt/etc/passwd || \
-      echo "messagebus:x:100:101:User for D-BUS:/var/run/dbus:/bin/false" \
-        >> /mnt/etc/passwd
-    strinfile "messagebus:" /mnt/etc/group || \
-      echo "messagebus:!:101:" >> /mnt/etc/group
-    testmkd /mnt/var/run/dbus
-    # set permissions with userid
-    echo -e "\tchown messagebus:messagebus /var/run/dbus 2>/dev/null" \
-      >>/mnt/etc/${D_INITDIR}/boot.slx
-    rllinker "dbus" $start $stop
-  fi
-  if [ -f /mnt/etc/${D_INITDIR}/resmgr ] ; then
-    testmkd /mnt/var/run/resmgr/classes
-    start=$(($start + 1))
-    stop=$(($stop - 1))
-    rllinker "resmgr" $start $stop
-  fi
-  if [ -f /mnt/etc/${D_INITDIR}/policykitd ] ; then
-    testmkd /mnt/var/run/polkit
-    start=$(($start + 1))
-    stop=$(($stop - 1))
-    rllinker "policykitd" $start $stop
-  fi
-  if [ -f /mnt/etc/${D_INITDIR}/haldaemon ] ; then
-    strinfile "haldaemon:" /mnt/etc/passwd || \
-      echo "haldaemon:x:105:103:User for haldaemon:/var/run/hal:/bin/false" \
-        >> /mnt/etc/passwd
-    strinfile "haldaemon:" /mnt/etc/group || \
-      echo "haldaemon:!:103:" >> /mnt/etc/group
-    testmkd /mnt/var/run/hal
-    # set permissions with userid
-    echo -e "\tchown haldaemon:haldaemon /var/run/hal 2>/dev/null" \
-      >>/mnt/etc/${D_INITDIR}/boot.slx
-    start=$(($start + 1))
-    stop=$(($stop - 1))
-    rllinker "haldaemon" $start $stop
-  fi
-fi
-}
-# config nfsv4
-config_nfsv4 () {
-if [ "x$start_nfsv4" = "xyes" ]; then
-  testmkd /mnt/var/lib/nfs/rpc_pipefs
-  sed -e "s,NFS_SECURITY_GSS=.*,NFS_SECURITY_GSS=\"yes\"," \
-      -e "s,NFS4_SUPPORT=.*,NFS4_SUPPORT=\"yes\"," \
-      -i /mnt/etc/sysconfig/nfs
-  echo -e "rpc_pipefs\t/var/lib/nfs/rpc_pipefs rpc_pipefs defaults\t 0 0\n\
-nfsd\t\t/proc/fs/nfsd\tnfsd\t\tdefaults\t 0 0" >>/tmp/fstab
-echo -e "\t# stuff needed for nfsv4\n\tmount -t rpc_pipefs rpc_pipefs \
-/var/lib/nfs/rpc_pipefs\n\tmount -t nfsd nfsd /proc/fs/nfsd" \
->>/mnt/etc/${D_INITDIR}/boot.slx
-  # portmap is required for any NFS
-  config_portmap
-  rllinker "idmapd" 14 8
-  rllinker "gssd" 15 7
-fi
-}
-
-# set up keytable (function run in hwautocfg)
-keytable () {
-if [ -f /mnt/etc/${D_INITDIR}/kbd ] ; then
-  # remove unneeded components from the startscript
-  sed -e "/wanted keytable/,/^fi$/d;/load usb drivers/,/^esac$/d" \
-    -i /mnt/etc/${D_INITDIR}/kbd
-  sed -e "s,KEYTABLE=.*,KEYTABLE=\"${KEYTABLE}\"," \
-    -i /mnt/etc/${D_SYSCONFDIR}/keyboard
-  ln -sf /etc/${D_INITDIR}/kbd /mnt/etc/${D_INITBOOTD}/S01boot.kbd
-else
-  error "$df_errkbd" nonfatal
-fi
-}
-
-# consolefont and language (function run in hwautocfg)
-consolefont () {
-sed -e "s,RC_LANG=.*,RC_LANG=\"${LANG}\" # added in initrd," \
-    -i /mnt/etc/${D_SYSCONFDIR}/language
-#echo -e "\tsetfont ${CONSOLE_FONT} >${LOGFILE} 2>&1\n" \
-#  >>/mnt/etc/${D_INITDIR}/boot.slx
-}
-
-# check the glx and tvout stuff and configure it
-checkgraphix () {
-# test if unionfs
-case "${XMODULE}" in
-  radeon)
-    # IGP is not supported with fglrx driver (at least not in some versions)
-    # comment if it works properly ...
-    if ! strinfile " IGP" /tmp/hwsetup.info ; then
-      # check ${XDESC}/ hwsetup.info device string in Cards file and then
-      # for needed components
-      test -e /mnt/lib/modules/${KERNEL}/kernel/drivers/char/drm/fglrx.ko \
-        && test -e /mnt/usr/lib/xorg/modules/drivers/fglrx_drv.* && { 
-          XMODULE=fglrx
-          # it only works for UnionFS enabled systems or put it in preload
-          # but that might be not to clever :-)
-          ln -sf /usr/lib/xorg/libGL.so.1.2 \
-            /mnt/usr/lib/libGL.so.1.2 2>/dev/null || \
-          echo -e "/usr/lib/xorg/libGL.so.1.2\n/usr/lib/xorg/libGL.so.1\n\
-/usr/lib/xorg/libGL.so" >/mnt/etc/ld.so.preload
-          }
-      # check whether to enable tvout
-      if [ -n "$tvout" ] && [ "$tvout" != "no" -a "$tvout" != "NO" ] ; then
-        [ "$tvout" = "yes" ] && tvout="PAL-B"
-        TVOUT='\tOption\t\t"TVFormat" "'$tvout
-        TVOUT=$TVOUT'"\n\tOption\t\t"DesktopSetup" "horizontal"'
-      fi
-    fi
-  ;;
-  nv)
-    # check for needed components
-    test -e /mnt/lib/modules/${KERNEL}/kernel/drivers/char/drm/nvidia.ko \
-      && test -e /mnt/usr/X11R6/lib/modules/drivers/nvidia_drv.* && {
-        gllib=$(ls /mnt/usr/X11R6/lib/libGL.so.1.0.* 2>/dev/null|sed -n "1p")
-        if [ -n "$gllib" ] ; then
-          ln -sf ${gllib#/mnt} /mnt/usr/lib/libGL.so.1 2>/dev/null
-          # same for GLcore lib
-          gllib=$(ls /mnt/usr/X11R6/lib/libGLcore.so.1.0.* 2>/dev/null|\
-            sed -n "1p")
-          ln -sf ${gllib#/mnt} /mnt/usr/lib/libGLcore.so.1.0 2>/dev/null \
-            || fail=1
-          # load server modules (trick put the path before the official one)
-          testmkd /mnt/etc/X11/modules
-          ln -sf /usr/lib/xorg/modules/updates/extensions/libglx.so \
-            /mnt/etc/X11/modules/libglx.so || fail=1
-          ln -sf /usr/lib/xorg/modules/updates/drivers/nvidia_drv.so \
-            /mnt/etc/X11/modules/nvidia_drv.so || fail=1
-          [ -z $fail ] && XMODULE=nvidia
-          # ensure proper permissions for nvidia devices
-          echo -e "# nvidia stuff added by $0 in InitRamFS\nKERNEL==\"nvidia*|nvidiactl*\",\
-GROUP=\"video\",MODE=\"0666\"" > /mnt/etc/udev/rules.d/10-nvidia-devperms.rules
-       fi
-       }
-  ;;
-esac
-}
-
-# deprecated this way ...
-# Xorg variable settings. Lots of stuff changed from 10.1 to 10.2
-displayvars () {
-Files='\tModulePath\t"/etc/X11/modules"\n
-\tModulePath\t"/usr/lib/xorg/modules"\n
-\tFontPath\t"/usr/share/fonts/misc/:unscaled"\n
-\tFontPath\t"/usr/share/fonts/75dpi/:unscaled"\n
-\tFontPath\t"/usr/share/fonts/100dpi/:unscaled"'
-synapticsdrv="/usr/lib/xorg/modules/input/synaptics_drv.so"
-}
-- 
cgit v1.2.3-55-g7522