From 416ab8a37f1b07dc9f6c0fb3ff1a8ff2036510b5 Mon Sep 17 00:00:00 2001 From: Sebastian Schmelzer Date: Thu, 2 Sep 2010 17:50:49 +0200 Subject: change dir structure --- initramfs/stage3-stuff/bin/hwautocfg | 299 ----------------------------------- 1 file changed, 299 deletions(-) delete mode 100755 initramfs/stage3-stuff/bin/hwautocfg (limited to 'initramfs/stage3-stuff/bin/hwautocfg') diff --git a/initramfs/stage3-stuff/bin/hwautocfg b/initramfs/stage3-stuff/bin/hwautocfg deleted file mode 100755 index 1f02892e..00000000 --- a/initramfs/stage3-stuff/bin/hwautocfg +++ /dev/null @@ -1,299 +0,0 @@ -#!/bin/sh -# Copyright (c) 2003..2006 - RZ Uni Freiburg -# Copyright (c) 2006..2010 - OpenSLX GmbH -# -# This program is free software distributed under the GPL version 2. -# See http://openslx.org/COPYING -# -# If you have any feedback please consult http://openslx.org/feedback and -# send your feedback to feedback@openslx.org -# -# General information about OpenSLX can be found under http://openslx.org -# -# Universal (distro independent) hardware autoconfiguration script for -# OpenSLX linux stateless clients, using SuSE hwinfo for configuration - -############################################################################# -# pre part, load USB modules and start hardware detection pci -base () { -# avoid annoying error messages because of missing scripts -for tool in /usr/sbin/acpidump \ - /usr/bin/udevinfo \ - /sbin/dmraid ; do - testmkd ${tool%/*} - echo -e "#!/bin/sh" >${tool} - chmod u+x ${tool} -done -# no kernel messages, switch on hotplug via /sbin/mdev -echo "0 0 0 0" >/proc/sys/kernel/printk -echo "/sbin/mdev" >/proc/sys/kernel/hotplug -modprobe -a ${MODPRV} usbhid hid-bright 2>/dev/null & -# check from vga= that the traditional framebuffer is needed e.g. for splashy -# get information on the graphics adaptor if bootsplash or xserver plugins are -# present and the new drm/kms infrastructure is present -if strinfile "vga=" /proc/cmdline; then - ( modprobe -a vesafb fbcon 2>/dev/null - hwinfo --gfxcard >/etc/hwinfo.gfxcard ) & -elif [ -e /etc/init-hooks/00-started/xserver.sh -o \ - -e /etc/init-hooks/05--have-kernelvars/bootsplash.sh ] && \ - [ -e /lib/modules/${KERNEL}/kernel/drivers/gpu ]; then - # check for the standard modules (single gpu, multiple connector only) - ( hwinfo --gfxcard >/etc/hwinfo.gfxcard - case $(cat /etc/hwinfo.gfxcard) in - *i915*) - modprobe -a ${MODPRV} i915 2>/dev/null - ;; - *intel*|*Intel*) - modprobe -a ${MODPRV} i810 i830 i915 2>/dev/null - ;; - *nvidia*|*NVidia*|*nouveau*) - modprobe ${MODPRV} nouveau 2>/dev/null - ;; - *radeon*|*Radeon*) - modprobe ${MODPRV} radeon 2>/dev/null - ;; - *mga*|*matrox*|*Matrox*) - modprobe ${MODPRV} mga 2>/dev/null - ;; - *) - modprobe -a ${MODPRV} r128 savage sis tdfx ttm via - ;; - esac - modprobe -a drm fbcon; mdev -s ) & -fi - -# check and then load appropriate network card modules -nwcardlist=$(echo ${slxconf_listnwmod}|sed "s/\ /|/g") -# save results for later info and for Xen plugin when starting Xen VM -hwinfo --netcard --usb-ctrl >/etc/hwinfo.netcard-usbctrl -grep modprobe /etc/hwinfo.netcard-usbctrl | grep -E "$nwcardlist|hcd" | \ - grep -v ehci | sed 's/.* Cmd: "//;s/"//' | sort -u >/etc/modprobe.base -# virtio hack -if [ $(grep -ic "virtio_pci" /etc/modprobe.base) -ge 1 ]; then - echo "modprobe virtio_net" >>/etc/modprobe.base -fi -sh /etc/modprobe.base; mdev -s - -# optimization possible: exclude network and usb base drivers from the -# following list (bios detection for non-hwautocfg component) -( hwinfo --pci >/etc/hwinfo.data; echo "read pci device list at $(sysup)" \ - >/tmp/hwdataready ) & -( usleep 100000 ; hwinfo --bios >/etc/hwinfo.bios ) & -# for mounting partitions/devices with the "auto" option -echo -e "ext3\next2\nreiserfs\nxfs\njfs\next4\nvfat" >/etc/filesystems -# request a local block device for config and root filesystem (lbd://) -if grep -iq '"lbd://' /proc/cmdline /etc/initramfs-setup; then - modprobe -a ${MODPRV} ehci_hcd usb-storage sd_mod - mdev -s -fi -return 0 -} - -############################################################################# -# main part -hwmain () { -# activate the previously detected devices -[ $DEBUGLEVEL -ge 2 ] || modloadbg=" >/dev/null 2>\&1" -# check for rtc if not compiled directly into the kernel -( [ -e /proc/driver/rtc ] || modprobe ${MODPRV} rtc-cmos ) & -waitfor /tmp/hwdataready 10000 -sed '/Driver Info #1/,/Config Status:/d' \ - /etc/hwinfo.data | grep modprobe | sed "s|.* Cmd: \"||;s|\"|$modloadbg|" \ - | sort -u >/etc/modprobe.pci -sh /etc/modprobe.pci -mdev -s - -# bluetooth setup (start it later if present, depends on firmware availa- -# bility, interpreted by servconfig) -#( hwinfo --bluetooth >/etc/hwinfo.bt ) & - -# load harddisk driver and check for harddisk -( grep -q -E "SCSI|SATA" /etc/hwinfo.data && modprobe ${MODPRV} sd_mod - grep -q -E "IDE" /etc/hwinfo.data && modprobe ${MODPRV} ide-disk - hwinfo --disk | sed -n "/Device File: /p" | \ - sed -e "s|.*Device File: /dev/||;s| .*||" >/etc/hwinfo.disk - echo "disk detection finished at $(sysup)" >/tmp/diskready; ) & -[ $DEBUGLEVEL -eq 21 ] && echo "** finished 2nd hwdetection at $(sysup)" - -# load disk/optical high level drivers -modprobe ${MODPRV} ide-cd 2>/dev/null -modprobe ${MODPRV} sr_mod 2>/dev/null -modprobe ${MODPRV} ide-floppy 2>/dev/null -mdev -s - -# load kernel module for ps2 mice and map the mousehandler to /dev/input/mice -( [ -f /lib/modules/${KERNEL}/kernel/drivers/input/mouse/psmouse.ko ] && \ - modprobe ${MODPRV} psmouse - [ -f /lib/modules/${KERNEL}/kernel/drivers/input/mousedev.ko ] && \ - modprobe ${MODPRV} mousedev - testmkd /dev/input - mknod /dev/input/mice c 13 63 2>/dev/null - hwinfo --mouse >/etc/hwinfo.mouse ) & - -# complete the audio configuration and load the dummy module if no audio -# hardware is present in the machine -grep -q -E "Audio|sound" /etc/hwinfo.data || modprobe snd-dummy -modprobe ${MODPRV} snd-pcm-oss -modprobe ${MODPRV} snd-mixer-oss -#ln -s /proc/sound/oss/sndstat /dev/sndstat - -[ $DEBUGLEVEL -eq 21 ] && echo "** finished most of module loading at $(sysup)" - -# scanner setup (fixme: to be checked) -hwinfo --scanner >/etc/hwinfo.scanner -[ -f /tmp/scanner-udev ] && cat /tmp/scanner-udev \ - >>/mnt/etc/udev/rules.d/04-scanner.rules - -# parallel port setup -modprobe ${MODPRV} parport_pc && modprobe ${MODPRV} ppdev - -# if any new device appeared up to now -mdev -s -return 0 -} -############################################################################# -# harddisk partition setup part -disk () { -# get idea of availabe harddisk partitions, put swap partitions into -# (/mnt)/etc/fstab and format and mount partitions of type 44 (unknown) -[ $DEBUGLEVEL -eq 21 ] && echo "** starting hdd stuff at $(sysup)" -waitfor /tmp/diskready 20000 -if [ -s /etc/hwinfo.disk ] ; then - for hd in $(cat /etc/hwinfo.disk) ; do - fdisk -l /dev/$hd|sed -n "/^\/dev\//p" >/etc/disk.partition - for hdpartnr in $(cat /etc/disk.partition | \ - sed -n -e "/ 82 /p"|sed -e "s/[[:space:]].*//") ; do - echo -e "$hdpartnr\tswap\t\tswap\t\tdefaults\t 0 0" >>/tmp/fstab - done - # we use special non assigned partition type (id44) for harddisk scratch - # space, thus no normal filesystem will be incidentally deleted or - # corrupted - for hdpartnr in $(cat /etc/disk.partition | \ - sed -n -e "/ 44 /p"|sed -e "s/[[:space:]].*//") ; do - # check for supported filesystem and formatter - ( if diskfm $hdpartnr ; then - echo "$hdpartnr is mounted to /mnt/tmp at $(sysup)" >/tmp/tmpready - echo -e "$hdpartnr\t/tmp\t\tauto\t\tdefaults\t 0 0" >>/tmp/fstab - else - echo "formatting failed for some reason ($(sysup))" >/tmp/tmpready - fi ) & - part44=yes - break - done - # put detected linux partitions (83) into /etc/fstab with "noauto", - # special partition 45 (persistent scratch) to /var/scratch and 46 - # to /var/openslx - for partid in 83 45 46 ; do - for hdpartnr in $(cat /etc/disk.partition | \ - sed -n -e "/ ${partid} /p"|sed -e "s/[[:space:]].*//") ; do - mkdir -p /mnt/media/${hdpartnr#/dev/*} 2>/dev/null - if [ ${partid} -eq 83 ] ; then - echo -e "$hdpartnr\t/media/${hdpartnr#/dev/*}\tauto\t\tnoauto,\ -noexec\t 0 0" >>/tmp/fstab - elif [ ${partid} -eq 45 ] ; then - # if more than one id45 present, the latter ones are simply mounted - # over the previous (the mounts are postponed a bit via do_mnt to - # have the filesystem completely prepared) - echo -e "waitfor ${hdpartnr} 4000\n\ - mount -t auto ${hdpartnr} /mnt/media/${hdpartnr#/dev/*}\n\ - ln -sf /media/${hdpartnr#/dev/*} /mnt/var/scratch" >>/etc/do_mnt - echo -e "${hdpartnr}\t/media/${hdpartnr#/dev/*}\tauto\t\tnoauto\ -\t\t 0 0" >>/tmp/fstab - elif [ ${partid} -eq 46 ] ; then - # mount a home directory to (/mnt)/var/home - echo -e "waitfor ${hdpartnr} 4000\n\ - mount -t auto ${hdpartnr} /mnt/media/${hdpartnr#/dev/*} \n\ - test -d /mnt/media/${hdpartnr#/dev/*}/home && \ - ln -sf /media/${hdpartnr#/dev/*} /mnt/var/home" >>/etc/do_mnt - echo -e "${hdpartnr}\t/media/${hdpartnr#/dev/*}\tauto\t\tnoauto\ -\t\t 0 0" >>/tmp/fstab - fi - done - done - # add - [ -f /etc/do_mnt ] && sed -e "1i. /etc/functions" -i /etc/do_mnt - done - # determine if tmp preparation should wait for format/mount or not - [ -z "$part44" ] && echo "finished at $(sysup)" >/tmp/tmpready -else - echo "no harddisk found ( $(sysup) )" >/tmp/tmpready -fi -[ $DEBUGLEVEL -eq 21 ] && echo "** finished hdd stuff at $(sysup)" -} - -############################################################################# -# cleanup/finishing part -finish () { -mdev -s -# mount filesystem parts (if any) requested in disk setup -[ -f /etc/do_mnt ] && sh /etc/do_mnt & -# remove unneeded disk and mouse drivers -[ ! -s /etc/hwinfo.disk ] && rmmod sd_mod 2>/dev/null -#grep -q " PS/2 " /etc/hwinfo.mouse || \ -# { rmmod psmouse 2>/dev/null; rm /dev/psaux 2>/dev/null; } -# more sophistication possible :) -# remove /sbin/mdev as not available in stage4 -echo >/proc/sys/kernel/hotplug -return 0 -} - -############################################################################# -# main script starts here - -# functions common for all distros -. /etc/functions -# functions common for all distros, messages contains all error and -# info output -. /etc/messages -# load distro specific configuration variables and functions. distro -# specific functions may overwrite functions defined in /etc/functions -. /etc/distro-functions -# source general slx and initramfs-setup settings -. /etc/slxsystem.conf -. /etc/initramfs-setup - -# script run timer -[ $DEBUGLEVEL -eq 8 -o $DEBUGLEVEL -eq 21 ] && \ - echo "** HW $1 setup started at $(sysup)" - -# heavy debugging output in level 3 and above and specific for 11 -[ $DEBUGLEVEL -gt 3 -a $DEBUGLEVEL -lt 8 -o $DEBUGLEVEL -eq 11 ] && \ - set -x - -case $1 in - # pre initialization: loading USB base and network adaptor modules, - # detection of other pci bus modules - base) - base - ;; - # main part of hardware setup of pci stuff - main) - hwmain - # main script run timer or debug information - [ $DEBUGLEVEL -eq 8 -o $DEBUGLEVEL -eq 21 ] && \ - echo "** HW main setup finished at $(sysup)" - echo "hwsetup main part finished at $(sysup)" >/tmp/hwcfg - ;; - # disk setup part (detecting general id82,83 and slx id44,45,46, formatting - # if required and mounting) - disk) - # try to enable compressed RAM SWAP - if modprobe ${MODPRV} ramzswap && [ -f /usr/bin/rzscontrol ] ; then - mdev -s - rzscontrol /dev/ramzswap0 --init - swapon /dev/ramzswap0 - #hdswap="# disk swap disabled because of enabled compressed ramswap" - fi - # if disk action is not disabled - if [ "x${hw_local_disk}" != "xno" ] ; then - disk - else - echo "using harddisk switched off by hw_local_disk set to 'no' ( $(sysup) )" \ - >/tmp/tmpready - fi - ;; - # remove unneeded kernel modules - finish) - finish - ;; -esac -- cgit v1.2.3-55-g7522