From cb34bf23f8ba7aa596cc658e149442c2c6cca6cb Mon Sep 17 00:00:00 2001
From: Dirk von Suchodoletz
Date: Thu, 26 Feb 2009 13:20:14 +0000
Subject: Further improvements for run-virt.sh ...

git-svn-id: http://svn.openslx.org/svn/openslx/openslx/trunk@2643 95ad53e4-c205-0410-b2fa-d234c58c8868
---
 os-plugins/plugins/vmware/files/run-virt.include | 245 ++++++++++++-----------
 1 file changed, 125 insertions(+), 120 deletions(-)

(limited to 'os-plugins/plugins/vmware/files/run-virt.include')

diff --git a/os-plugins/plugins/vmware/files/run-virt.include b/os-plugins/plugins/vmware/files/run-virt.include
index 001691ce..c9430098 100644
--- a/os-plugins/plugins/vmware/files/run-virt.include
+++ b/os-plugins/plugins/vmware/files/run-virt.include
@@ -12,118 +12,12 @@
 # General information about OpenSLX can be found at http://openslx.org/
 # -----------------------------------------------------------------------------
 # run-virt.include
-#    - 
+#    - component for vmware/player of the vmchooser plugin run-virt.sh
 # -----------------------------------------------------------------------------
 
-# declaration of default variables
+# configuration writer functions
 ################################################################################
 
-# temporary disk space for logs, etc...
-redodir=/tmp/vmware/${USER}
-# dir for configs and vmem file
-confdir=${redodir}
-# configfile
-conffile="${confdir}/run-vmware.conf"
-# users vmware config folder
-vmhome="${HOME}/.vmware"
-
-# percentage of memory to use for vmwares in standard case
-permem=60
-
-# serial port defined (e.g. "ttyS0" or "autodetect")
-serial=$(grep -i "<serial port=\"" ${xml} | awk -F "\"" '{ print $2 }')
-case "$serial" in
-  tty*)
-    serialdev="serial0.filename = \"/dev/${serial}\""
-    serial="TRUE"
-    ;;
-  autodetect)
-    serialdev="serial0.autodetect = \"TRUE\""
-    serial="TRUE"
-    ;;
-  *)
-    serialdev=""
-    serial="FALSE"
-    ;;
-esac
-
-# Hack, if more than 2,5G RAM use 40% of Ram and write vmem into Ram as well
-# (40% vmware | 40% confdir(vmem...) | 20% host
-if [ "${totalmem}" -ge "2500" ]; then
-  permem=40
-  confdir=/dev/shm/vmware/$USER
-  conffile=${confdir}/run-vmware.conf
-  mkdir -p /dev/shm/vmware/$USER
-# if there is no scratch space on disk you have to waste your mem
-elif grep -qe "ramfs /tmp " /proc/mounts ; then
-  permem=30
-fi
-mem=$(expr ${totalmem} / 100 \* ${permem} / 4 \* 4)
-
-# check memory range
-memtest=${totalmem}-128
-if [ "${mem}" -lt "128" ] || [ "${mem}" -gt "${totalmem}" ]; then
-  writelog "\n\n"
-  writelog "\tYour memory is out of range: ${mem} MB."
-  writelog "\tMin. 128 MB for host and guest!"
-  writelog "tTry --mem option."
-  exit 1
-fi
-
-# virtual fd/cd/dvd and drive devices, floppy b: for configuration
-#floppya is always false, if we have a floppy device or not isn't
-#important.
-floppya="FALSE"
-floppyb="TRUE"
-floppybname="/var/lib/virt/vmchooser/loopimg/fd.img"
-cdr_1="FALSE"
-cdr_2="FALSE"
-# ide is expected default, test for the virtual disk image type should
-# be done while creating the runscripts ...
-ide="TRUE"
-scsi="FALSE"
-hddrv="ide"
-
-# get version info
-. /etc/vmware/slxvmconfig
-
-# VMplayer buildversion
-vmbuild=$buildversion
-vmversion=$version
-
-# VMware start options
-#-X = fullscreen
-vmopt="-X"
-
-# config and hardware version ex. 8/6 for VMware6.5
-# will be replaced automatically during run of vmware/player
-confver=8
-hver=7
-
-# Folder of VirtualMachine Images (VMDKs of that type. Compatible images might
-# be found in older version folders too ...)
-vmdir="/var/lib/virt/vmware/vmware65"
-
-#TODO: check for a faster way, perhaps we should put this into XML
-# the grepping under some circumstances lets wait the user for ages ...
-if [ $(echo ${imagename} | grep -cv "\-flat.vmdk") ]; then
-  hddrv=$(grep -m 1 -ia "ddb.adapterType" ${diskfile} | awk -F "\"" '{print $2}')
-  if [ "${hddrv}" = "ide" ]; then
-    ide="TRUE"
-    scsi="FALSE"
-  elif [ "${hddrv}" = "lsilogic" ]; then
-    ide="FALSE"
-    scsi="TRUE"  
-  elif [ "${hddrv}" = "buslogic" ]; then
-    ide="FALSE"
-    scsi="TRUE"  
-  fi
-fi
-
-# Should we debug? Hell yes, we should always debug!
-debug=0
-
-### write run-vmware.conf #######################################################
 runvmwareconfheader ()
 {
   echo ".encoding = \"UTF-8\"
@@ -132,8 +26,6 @@ runvmwareconfheader ()
 # id
 displayName = \"${displayname}\"
 guestOS = \"${vmostype}\"
-config.version = \"${confver}\"
-virtualHW.version = \"${hver}\"
 
 # CPU/MEM
 memsize = \"${mem}\"
@@ -180,14 +72,6 @@ ethernet0.connectionType = \"${network_kind}\"
 ethernet0.address = \"00:50:56:0D:${mac}\"
 ethernet0.wakeOnPcktRcv = \"FALSE\"
 
-# usb
-usb.present = \"TRUE\"
-ehci.present= \"TRUE\"
-
-# graphics
-svga.autodetect = \"TRUE\"
-mks.enable3d = \"TRUE\"
-
 # sound
 sound.present = \"TRUE\"
 sound.fileName = \"-1\"
@@ -223,12 +107,37 @@ gui.restricted = \"TRUE\"
 serial0.present = \"${serial}\"
 ${serialdev}" >${conffile}
 
+case "$vmversion" in
+  1.0|5.5|2.0|6.0)
+    echo "
+# version specific stuff
+config.version = \"8\"
+virtualHW.version = \"4\"
+usb.present = \"TRUE\"
+usb.generic.autoconnect = \"TRUE\"
+svga.maxWidth = \"${xres}\"
+svga.maxHeight = \"${yres}\"
+svga.autodetect = \"TRUE\"
+pref.hotkey.shift = \"TRUE\"
+pref.hotkey.control = \"TRUE\"
+pref.hotkey.alt = \"TRUE\"" >>${conffile}
+  ;;
+  2.5|6.5)
+    echo "
+# version specific stuff
+config.version = \"8\"
+virtualHW.version = \"7\"
+usb.present = \"TRUE\"
+ehci.present= \"TRUE\"
+svga.autodetect = \"TRUE\"
+mks.enable3d = \"TRUE\"" >>${conffile}    
+  ;;
+esac
+
   # set the appropriate permissions for the vmware config file
   chmod u+rwx ${conffile} >/dev/null 2>&1
 }
 
-
-### creates user configurationfile in ${vmhome} ################################
 preferencesheader ()
 {
   echo ".encoding = \"UTF-8\"
@@ -271,6 +180,102 @@ pref.eula.1.buildNumber = \"${vmbuild}\"" \
   >${vmhome}/preferences
 }
 
+# declaration of default variables
+################################################################################
+
+# temporary disk space for logs, etc...
+redodir=/tmp/vmware/${USER}
+# dir for configs and vmem file
+confdir=${redodir}
+# configfile
+conffile="${confdir}/run-vmware.conf"
+# users vmware config folder
+vmhome="${HOME}/.vmware"
+
+# percentage of memory to use for vmwares in standard case
+permem=60
+
+# serial port defined (e.g. "ttyS0" or "autodetect")
+serial=$(grep -i "<serial port=\"" ${xml} | awk -F "\"" '{ print $2 }')
+case "$serial" in
+  tty*)
+    serialdev="serial0.filename = \"/dev/${serial}\""
+    serial="TRUE"
+    ;;
+  autodetect)
+    serialdev="serial0.autodetect = \"TRUE\""
+    serial="TRUE"
+    ;;
+  *)
+    serialdev=""
+    serial="FALSE"
+    ;;
+esac
+
+# Hack, if more than 2,5G RAM use 40% of Ram and write vmem into Ram as well
+# (40% vmware | 40% confdir(vmem...) | 20% host
+if [ "${totalmem}" -ge "2500" ]; then
+  permem=40
+  confdir=/dev/shm/vmware/$USER
+  conffile=${confdir}/run-vmware.conf
+  mkdir -p /dev/shm/vmware/$USER
+# if there is no scratch space on disk you have to waste your mem
+elif grep -qe "ramfs /tmp " /proc/mounts ; then
+  permem=30
+fi
+mem=$(expr ${totalmem} / 100 \* ${permem} / 4 \* 4)
+
+# check memory range
+memtest=${totalmem}-128
+if [ "${mem}" -lt "128" ] || [ "${mem}" -gt "${totalmem}" ]; then
+  writelog "\n\n"
+  writelog "\tYour memory is out of range: ${mem} MB."
+  writelog "\tMin. 128 MB for host and guest!"
+  writelog "tTry --mem option."
+  exit 1
+fi
+
+# virtual fd/cd/dvd and drive devices, floppy b: for configuration
+#floppya is always false, if we have a floppy device or not isn't
+#important.
+floppya="FALSE"
+floppyb="TRUE"
+floppybname="/var/lib/virt/vmchooser/loopimg/fd.img"
+cdr_1="FALSE"
+cdr_2="FALSE"
+# ide is expected default, test for the virtual disk image type should
+# be done while creating the runscripts ...
+ide="TRUE"
+scsi="FALSE"
+hddrv="ide"
+
+# get several version infos for vmware/player
+. /etc/vmware/slxvmconfig
+vmbuild=$buildversion
+vmversion=$version
+
+# VMware start options
+#-X = fullscreen
+vmopt="-X"
+
+#TODO: check for a faster way, perhaps we should put this into XML
+# the grepping under some circumstances lets wait the user for ages ...
+if [ $(echo ${imagename} | grep -cv "\-flat.vmdk") ]; then
+  hddrv=$(grep -m 1 -ia "ddb.adapterType" ${diskfile} | awk -F "\"" '{print $2}')
+  if [ "${hddrv}" = "ide" ]; then
+    ide="TRUE"
+    scsi="FALSE"
+  elif [ "${hddrv}" = "lsilogic" ]; then
+    ide="FALSE"
+    scsi="TRUE"  
+  elif [ "${hddrv}" = "buslogic" ]; then
+    ide="FALSE"
+    scsi="TRUE"  
+  fi
+fi
+
+# Should we debug? Hell yes, we should always debug!
+debug=0
 
 ### log function ###############################################################
 # function to write to stdout and logfile
-- 
cgit v1.2.3-55-g7522